From 863981e96738983919de841ec669e157e6bdaeb0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Sun, 11 Sep 2016 04:34:46 -0300 Subject: Linux-libre 4.7.1-gnu --- drivers/cpufreq/longhaul.c | 86 +++++++++++++++++++--------------------------- 1 file changed, 36 insertions(+), 50 deletions(-) (limited to 'drivers/cpufreq/longhaul.c') diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 0f6b229af..c46a12df4 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -21,6 +21,8 @@ * BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous* */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -40,8 +42,6 @@ #include "longhaul.h" -#define PFX "longhaul: " - #define TYPE_LONGHAUL_V1 1 #define TYPE_LONGHAUL_V2 2 #define TYPE_POWERSAVER 3 @@ -347,14 +347,13 @@ retry_loop: freqs.new = calc_speed(longhaul_get_cpu_mult()); /* Check if requested frequency is set. */ if (unlikely(freqs.new != speed)) { - printk(KERN_INFO PFX "Failed to set requested frequency!\n"); + pr_info("Failed to set requested frequency!\n"); /* Revision ID = 1 but processor is expecting revision key * equal to 0. Jumpers at the bottom of processor will change * multiplier and FSB, but will not change bits in Longhaul * MSR nor enable voltage scaling. */ if (!revid_errata) { - printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" " - "option.\n"); + pr_info("Enabling \"Ignore Revision ID\" option\n"); revid_errata = 1; msleep(200); goto retry_loop; @@ -364,11 +363,10 @@ retry_loop: * but it doesn't change frequency. I tried poking various * bits in northbridge registers, but without success. */ if (longhaul_flags & USE_ACPI_C3) { - printk(KERN_INFO PFX "Disabling ACPI C3 support.\n"); + pr_info("Disabling ACPI C3 support\n"); longhaul_flags &= ~USE_ACPI_C3; if (revid_errata) { - printk(KERN_INFO PFX "Disabling \"Ignore " - "Revision ID\" option.\n"); + pr_info("Disabling \"Ignore Revision ID\" option\n"); revid_errata = 0; } msleep(200); @@ -379,7 +377,7 @@ retry_loop: * RevID = 1. RevID errata will make things right. Just * to be 100% sure. */ if (longhaul_version == TYPE_LONGHAUL_V2) { - printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n"); + pr_info("Switching to Longhaul ver. 1\n"); longhaul_version = TYPE_LONGHAUL_V1; msleep(200); goto retry_loop; @@ -387,8 +385,7 @@ retry_loop: } if (!bm_timeout) { - printk(KERN_INFO PFX "Warning: Timeout while waiting for " - "idle PCI bus.\n"); + pr_info("Warning: Timeout while waiting for idle PCI bus\n"); return -EBUSY; } @@ -433,12 +430,12 @@ static int longhaul_get_ranges(void) /* Get current frequency */ mult = longhaul_get_cpu_mult(); if (mult == -1) { - printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n"); + pr_info("Invalid (reserved) multiplier!\n"); return -EINVAL; } fsb = guess_fsb(mult); if (fsb == 0) { - printk(KERN_INFO PFX "Invalid (reserved) FSB!\n"); + pr_info("Invalid (reserved) FSB!\n"); return -EINVAL; } /* Get max multiplier - as we always did. @@ -468,11 +465,11 @@ static int longhaul_get_ranges(void) print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { - printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + pr_info("highestspeed == lowest, aborting\n"); return -EINVAL; } if (lowest_speed > highest_speed) { - printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + pr_info("nonsense! lowest (%d > %d) !\n", lowest_speed, highest_speed); return -EINVAL; } @@ -538,16 +535,16 @@ static void longhaul_setup_voltagescaling(void) rdmsrl(MSR_VIA_LONGHAUL, longhaul.val); if (!(longhaul.bits.RevisionID & 1)) { - printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n"); + pr_info("Voltage scaling not supported by CPU\n"); return; } if (!longhaul.bits.VRMRev) { - printk(KERN_INFO PFX "VRM 8.5\n"); + pr_info("VRM 8.5\n"); vrm_mV_table = &vrm85_mV[0]; mV_vrm_table = &mV_vrm85[0]; } else { - printk(KERN_INFO PFX "Mobile VRM\n"); + pr_info("Mobile VRM\n"); if (cpu_model < CPU_NEHEMIAH) return; vrm_mV_table = &mobilevrm_mV[0]; @@ -558,27 +555,21 @@ static void longhaul_setup_voltagescaling(void) maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " - "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, - maxvid.mV/1000, maxvid.mV%1000); + pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n", + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); return; } if (minvid.mV == maxvid.mV) { - printk(KERN_INFO PFX "Claims to support voltage scaling but " - "min & max are both %d.%03d. " - "Voltage scaling disabled\n", - maxvid.mV/1000, maxvid.mV%1000); + pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n", + maxvid.mV/1000, maxvid.mV%1000); return; } /* How many voltage steps*/ numvscales = maxvid.pos - minvid.pos + 1; - printk(KERN_INFO PFX - "Max VID=%d.%03d " - "Min VID=%d.%03d, " - "%d possible voltage scales\n", + pr_info("Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n", maxvid.mV/1000, maxvid.mV%1000, minvid.mV/1000, minvid.mV%1000, numvscales); @@ -617,12 +608,12 @@ static void longhaul_setup_voltagescaling(void) pos = minvid.pos; freq_pos->driver_data |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + pr_info("f: %d kHz, index: %d, vid: %d mV\n", speed, (int)(freq_pos - longhaul_table), vid.mV); } can_scale_voltage = 1; - printk(KERN_INFO PFX "Voltage scaling enabled.\n"); + pr_info("Voltage scaling enabled\n"); } @@ -720,8 +711,7 @@ static int enable_arbiter_disable(void) pci_write_config_byte(dev, reg, pci_cmd); pci_read_config_byte(dev, reg, &pci_cmd); if (!(pci_cmd & 1<<7)) { - printk(KERN_ERR PFX - "Can't enable access to port 0x22.\n"); + pr_err("Can't enable access to port 0x22\n"); status = 0; } } @@ -758,8 +748,7 @@ static int longhaul_setup_southbridge(void) if (pci_cmd & 1 << 7) { pci_read_config_dword(dev, 0x88, &acpi_regs_addr); acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", - acpi_regs_addr); + pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr); } pci_dev_put(dev); @@ -853,14 +842,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_version = TYPE_LONGHAUL_V1; } - printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + pr_info("VIA %s CPU detected. ", cpuname); switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); + pr_cont("Longhaul v%d supported\n", longhaul_version); break; case TYPE_POWERSAVER: - printk(KERN_CONT "Powersaver supported.\n"); + pr_cont("Powersaver supported\n"); break; }; @@ -889,15 +878,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) if (!(longhaul_flags & USE_ACPI_C3 || longhaul_flags & USE_NORTHBRIDGE) && ((pr == NULL) || !(pr->flags.bm_control))) { - printk(KERN_ERR PFX - "No ACPI support. Unsupported northbridge.\n"); + pr_err("No ACPI support: Unsupported northbridge\n"); return -ENODEV; } if (longhaul_flags & USE_NORTHBRIDGE) - printk(KERN_INFO PFX "Using northbridge support.\n"); + pr_info("Using northbridge support\n"); if (longhaul_flags & USE_ACPI_C3) - printk(KERN_INFO PFX "Using ACPI support.\n"); + pr_info("Using ACPI support\n"); ret = longhaul_get_ranges(); if (ret != 0) @@ -934,20 +922,18 @@ static int __init longhaul_init(void) return -ENODEV; if (!enable) { - printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n"); + pr_err("Option \"enable\" not set - Aborting\n"); return -ENODEV; } #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, " - "longhaul disabled.\n"); + pr_err("More than 1 CPU detected, longhaul disabled\n"); return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC - if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently " - "broken in this configuration.\n"); + if (boot_cpu_has(X86_FEATURE_APIC)) { + pr_err("APIC detected. Longhaul is currently broken in this configuration.\n"); return -ENODEV; } #endif @@ -955,7 +941,7 @@ static int __init longhaul_init(void) case 6 ... 9: return cpufreq_register_driver(&longhaul_driver); case 10: - printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n"); + pr_err("Use acpi-cpufreq driver for VIA C7\n"); default: ; } -- cgit v1.2.3-54-g00ecf