From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/gpio/gpio-pcf857x.c | 442 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 442 insertions(+) create mode 100644 drivers/gpio/gpio-pcf857x.c (limited to 'drivers/gpio/gpio-pcf857x.c') diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c new file mode 100644 index 000000000..945f0cda8 --- /dev/null +++ b/drivers/gpio/gpio-pcf857x.c @@ -0,0 +1,442 @@ +/* + * Driver for pcf857x, pca857x, and pca967x I2C GPIO expanders + * + * Copyright (C) 2007 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +static const struct i2c_device_id pcf857x_id[] = { + { "pcf8574", 8 }, + { "pcf8574a", 8 }, + { "pca8574", 8 }, + { "pca9670", 8 }, + { "pca9672", 8 }, + { "pca9674", 8 }, + { "pcf8575", 16 }, + { "pca8575", 16 }, + { "pca9671", 16 }, + { "pca9673", 16 }, + { "pca9675", 16 }, + { "max7328", 8 }, + { "max7329", 8 }, + { "tca9554", 8 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pcf857x_id); + +#ifdef CONFIG_OF +static const struct of_device_id pcf857x_of_table[] = { + { .compatible = "nxp,pcf8574" }, + { .compatible = "nxp,pcf8574a" }, + { .compatible = "nxp,pca8574" }, + { .compatible = "nxp,pca9670" }, + { .compatible = "nxp,pca9672" }, + { .compatible = "nxp,pca9674" }, + { .compatible = "nxp,pcf8575" }, + { .compatible = "nxp,pca8575" }, + { .compatible = "nxp,pca9671" }, + { .compatible = "nxp,pca9673" }, + { .compatible = "nxp,pca9675" }, + { .compatible = "maxim,max7328" }, + { .compatible = "maxim,max7329" }, + { .compatible = "ti,tca9554" }, + { } +}; +MODULE_DEVICE_TABLE(of, pcf857x_of_table); +#endif + +/* + * The pcf857x, pca857x, and pca967x chips only expose one read and one + * write register. Writing a "one" bit (to match the reset state) lets + * that pin be used as an input; it's not an open-drain model, but acts + * a bit like one. This is described as "quasi-bidirectional"; read the + * chip documentation for details. + * + * Many other I2C GPIO expander chips (like the pca953x models) have + * more complex register models and more conventional circuitry using + * push/pull drivers. They often use the same 0x20..0x27 addresses as + * pcf857x parts, making the "legacy" I2C driver model problematic. + */ +struct pcf857x { + struct gpio_chip chip; + struct i2c_client *client; + struct mutex lock; /* protect 'out' */ + spinlock_t slock; /* protect irq demux */ + unsigned out; /* software latch */ + unsigned status; /* current status */ + + int (*write)(struct i2c_client *client, unsigned data); + int (*read)(struct i2c_client *client); +}; + +/*-------------------------------------------------------------------------*/ + +/* Talk to 8-bit I/O expander */ + +static int i2c_write_le8(struct i2c_client *client, unsigned data) +{ + return i2c_smbus_write_byte(client, data); +} + +static int i2c_read_le8(struct i2c_client *client) +{ + return (int)i2c_smbus_read_byte(client); +} + +/* Talk to 16-bit I/O expander */ + +static int i2c_write_le16(struct i2c_client *client, unsigned word) +{ + u8 buf[2] = { word & 0xff, word >> 8, }; + int status; + + status = i2c_master_send(client, buf, 2); + return (status < 0) ? status : 0; +} + +static int i2c_read_le16(struct i2c_client *client) +{ + u8 buf[2]; + int status; + + status = i2c_master_recv(client, buf, 2); + if (status < 0) + return status; + return (buf[1] << 8) | buf[0]; +} + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_input(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + int status; + + mutex_lock(&gpio->lock); + gpio->out |= (1 << offset); + status = gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static int pcf857x_get(struct gpio_chip *chip, unsigned offset) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + int value; + + value = gpio->read(gpio->client); + return (value < 0) ? 0 : (value & (1 << offset)); +} + +static int pcf857x_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); + unsigned bit = 1 << offset; + int status; + + mutex_lock(&gpio->lock); + if (value) + gpio->out |= bit; + else + gpio->out &= ~bit; + status = gpio->write(gpio->client, gpio->out); + mutex_unlock(&gpio->lock); + + return status; +} + +static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value) +{ + pcf857x_output(chip, offset, value); +} + +/*-------------------------------------------------------------------------*/ + +static irqreturn_t pcf857x_irq(int irq, void *data) +{ + struct pcf857x *gpio = data; + unsigned long change, i, status, flags; + + status = gpio->read(gpio->client); + + spin_lock_irqsave(&gpio->slock, flags); + + /* + * call the interrupt handler iff gpio is used as + * interrupt source, just to avoid bad irqs + */ + + change = (gpio->status ^ status); + for_each_set_bit(i, &change, gpio->chip.ngpio) + handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i)); + gpio->status = status; + + spin_unlock_irqrestore(&gpio->slock, flags); + + return IRQ_HANDLED; +} + +/* + * NOP functions + */ +static void noop(struct irq_data *data) { } + +static unsigned int noop_ret(struct irq_data *data) +{ + return 0; +} + +static int pcf857x_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct pcf857x *gpio = irq_data_get_irq_chip_data(data); + + irq_set_irq_wake(gpio->client->irq, on); + return 0; +} + +static struct irq_chip pcf857x_irq_chip = { + .name = "pcf857x", + .irq_startup = noop_ret, + .irq_shutdown = noop, + .irq_enable = noop, + .irq_disable = noop, + .irq_ack = noop, + .irq_mask = noop, + .irq_unmask = noop, + .irq_set_wake = pcf857x_irq_set_wake, +}; + +/*-------------------------------------------------------------------------*/ + +static int pcf857x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pcf857x_platform_data *pdata = dev_get_platdata(&client->dev); + struct device_node *np = client->dev.of_node; + struct pcf857x *gpio; + unsigned int n_latch = 0; + int status; + + if (IS_ENABLED(CONFIG_OF) && np) + of_property_read_u32(np, "lines-initial-states", &n_latch); + else if (pdata) + n_latch = pdata->n_latch; + else + dev_dbg(&client->dev, "no platform data\n"); + + /* Allocate, initialize, and register this gpio_chip. */ + gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + mutex_init(&gpio->lock); + spin_lock_init(&gpio->slock); + + gpio->chip.base = pdata ? pdata->gpio_base : -1; + gpio->chip.can_sleep = true; + gpio->chip.dev = &client->dev; + gpio->chip.owner = THIS_MODULE; + gpio->chip.get = pcf857x_get; + gpio->chip.set = pcf857x_set; + gpio->chip.direction_input = pcf857x_input; + gpio->chip.direction_output = pcf857x_output; + gpio->chip.ngpio = id->driver_data; + + /* NOTE: the OnSemi jlc1562b is also largely compatible with + * these parts, notably for output. It has a low-resolution + * DAC instead of pin change IRQs; and its inputs can be the + * result of comparators. + */ + + /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f; + * 9670, 9672, 9764, and 9764a use quite a variety. + * + * NOTE: we don't distinguish here between *4 and *4a parts. + */ + if (gpio->chip.ngpio == 8) { + gpio->write = i2c_write_le8; + gpio->read = i2c_read_le8; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_smbus_read_byte(client); + + /* '75/'75c addresses are 0x20..0x27, just like the '74; + * the '75c doesn't have a current source pulling high. + * 9671, 9673, and 9765 use quite a variety of addresses. + * + * NOTE: we don't distinguish here between '75 and '75c parts. + */ + } else if (gpio->chip.ngpio == 16) { + gpio->write = i2c_write_le16; + gpio->read = i2c_read_le16; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + status = -EIO; + + /* fail if there's no chip present */ + else + status = i2c_read_le16(client); + + } else { + dev_dbg(&client->dev, "unsupported number of gpios\n"); + status = -EINVAL; + } + + if (status < 0) + goto fail; + + gpio->chip.label = client->name; + + gpio->client = client; + i2c_set_clientdata(client, gpio); + + /* NOTE: these chips have strange "quasi-bidirectional" I/O pins. + * We can't actually know whether a pin is configured (a) as output + * and driving the signal low, or (b) as input and reporting a low + * value ... without knowing the last value written since the chip + * came out of reset (if any). We can't read the latched output. + * + * In short, the only reliable solution for setting up pin direction + * is to do it explicitly. The setup() method can do that, but it + * may cause transient glitching since it can't know the last value + * written (some pins may need to be driven low). + * + * Using n_latch avoids that trouble. When left initialized to zero, + * our software copy of the "latch" then matches the chip's all-ones + * reset state. Otherwise it flags pins to be driven low. + */ + gpio->out = ~n_latch; + gpio->status = gpio->out; + + status = gpiochip_add(&gpio->chip); + if (status < 0) + goto fail; + + /* Enable irqchip if we have an interrupt */ + if (client->irq) { + status = gpiochip_irqchip_add(&gpio->chip, &pcf857x_irq_chip, + 0, handle_level_irq, + IRQ_TYPE_NONE); + if (status) { + dev_err(&client->dev, "cannot add irqchip\n"); + goto fail_irq; + } + + status = devm_request_threaded_irq(&client->dev, client->irq, + NULL, pcf857x_irq, IRQF_ONESHOT | + IRQF_TRIGGER_FALLING | IRQF_SHARED, + dev_name(&client->dev), gpio); + if (status) + goto fail_irq; + + gpiochip_set_chained_irqchip(&gpio->chip, &pcf857x_irq_chip, + client->irq, NULL); + } + + /* Let platform code set up the GPIOs and their users. + * Now is the first time anyone could use them. + */ + if (pdata && pdata->setup) { + status = pdata->setup(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) + dev_warn(&client->dev, "setup --> %d\n", status); + } + + dev_info(&client->dev, "probed\n"); + + return 0; + +fail_irq: + gpiochip_remove(&gpio->chip); + +fail: + dev_dbg(&client->dev, "probe error %d for '%s'\n", status, + client->name); + + return status; +} + +static int pcf857x_remove(struct i2c_client *client) +{ + struct pcf857x_platform_data *pdata = dev_get_platdata(&client->dev); + struct pcf857x *gpio = i2c_get_clientdata(client); + int status = 0; + + if (pdata && pdata->teardown) { + status = pdata->teardown(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) { + dev_err(&client->dev, "%s --> %d\n", + "teardown", status); + return status; + } + } + + gpiochip_remove(&gpio->chip); + return status; +} + +static struct i2c_driver pcf857x_driver = { + .driver = { + .name = "pcf857x", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(pcf857x_of_table), + }, + .probe = pcf857x_probe, + .remove = pcf857x_remove, + .id_table = pcf857x_id, +}; + +static int __init pcf857x_init(void) +{ + return i2c_add_driver(&pcf857x_driver); +} +/* register after i2c postcore initcall and before + * subsys initcalls that may rely on these GPIOs + */ +subsys_initcall(pcf857x_init); + +static void __exit pcf857x_exit(void) +{ + i2c_del_driver(&pcf857x_driver); +} +module_exit(pcf857x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Brownell"); -- cgit v1.2.3