From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/gpu/drm/gma500/mdfld_device.c | 551 ++++++++++++++++++++++++++++++++++ 1 file changed, 551 insertions(+) create mode 100644 drivers/gpu/drm/gma500/mdfld_device.c (limited to 'drivers/gpu/drm/gma500/mdfld_device.c') diff --git a/drivers/gpu/drm/gma500/mdfld_device.c b/drivers/gpu/drm/gma500/mdfld_device.c new file mode 100644 index 000000000..265ad0de4 --- /dev/null +++ b/drivers/gpu/drm/gma500/mdfld_device.c @@ -0,0 +1,551 @@ +/************************************************************************** + * Copyright (c) 2011, Intel Corporation. + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + **************************************************************************/ + +#include "psb_drv.h" +#include "mid_bios.h" +#include "mdfld_output.h" +#include "mdfld_dsi_output.h" +#include "tc35876x-dsi-lvds.h" + +#include + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ +#define BLC_PWM_FREQ_CALC_CONSTANT 32 +#define MHz 1000000 +#define BRIGHTNESS_MIN_LEVEL 1 +#define BRIGHTNESS_MAX_LEVEL 100 +#define BRIGHTNESS_MASK 0xFF +#define BLC_POLARITY_NORMAL 0 +#define BLC_POLARITY_INVERSE 1 +#define BLC_ADJUSTMENT_MAX 100 + +#define MDFLD_BLC_PWM_PRECISION_FACTOR 10 +#define MDFLD_BLC_MAX_PWM_REG_FREQ 0xFFFE +#define MDFLD_BLC_MIN_PWM_REG_FREQ 0x2 + +#define MDFLD_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) +#define MDFLD_BACKLIGHT_PWM_CTL_SHIFT (16) + +static struct backlight_device *mdfld_backlight_device; + +int mdfld_set_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = + (struct drm_device *)bl_get_data(mdfld_backlight_device); + struct drm_psb_private *dev_priv = dev->dev_private; + int level = bd->props.brightness; + + DRM_DEBUG_DRIVER("backlight level set to %d\n", level); + + /* Perform value bounds checking */ + if (level < BRIGHTNESS_MIN_LEVEL) + level = BRIGHTNESS_MIN_LEVEL; + + if (gma_power_begin(dev, false)) { + u32 adjusted_level = 0; + + /* + * Adjust the backlight level with the percent in + * dev_priv->blc_adj2 + */ + adjusted_level = level * dev_priv->blc_adj2; + adjusted_level = adjusted_level / BLC_ADJUSTMENT_MAX; + dev_priv->brightness_adjusted = adjusted_level; + + if (mdfld_get_panel_type(dev, 0) == TC35876X) { + if (dev_priv->dpi_panel_on[0] || + dev_priv->dpi_panel_on[2]) + tc35876x_brightness_control(dev, + dev_priv->brightness_adjusted); + } else { + if (dev_priv->dpi_panel_on[0]) + mdfld_dsi_brightness_control(dev, 0, + dev_priv->brightness_adjusted); + } + + if (dev_priv->dpi_panel_on[2]) + mdfld_dsi_brightness_control(dev, 2, + dev_priv->brightness_adjusted); + gma_power_end(dev); + } + + /* cache the brightness for later use */ + dev_priv->brightness = level; + return 0; +} + +static int mdfld_get_brightness(struct backlight_device *bd) +{ + struct drm_device *dev = + (struct drm_device *)bl_get_data(mdfld_backlight_device); + struct drm_psb_private *dev_priv = dev->dev_private; + + DRM_DEBUG_DRIVER("brightness = 0x%x \n", dev_priv->brightness); + + /* return locally cached var instead of HW read (due to DPST etc.) */ + return dev_priv->brightness; +} + +static const struct backlight_ops mdfld_ops = { + .get_brightness = mdfld_get_brightness, + .update_status = mdfld_set_brightness, +}; + +static int device_backlight_init(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = (struct drm_psb_private *) + dev->dev_private; + + dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; + dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; + + return 0; +} + +static int mdfld_backlight_init(struct drm_device *dev) +{ + struct backlight_properties props; + int ret = 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = BRIGHTNESS_MAX_LEVEL; + props.type = BACKLIGHT_PLATFORM; + mdfld_backlight_device = backlight_device_register("mdfld-bl", + NULL, (void *)dev, &mdfld_ops, &props); + + if (IS_ERR(mdfld_backlight_device)) + return PTR_ERR(mdfld_backlight_device); + + ret = device_backlight_init(dev); + if (ret) + return ret; + + mdfld_backlight_device->props.brightness = BRIGHTNESS_MAX_LEVEL; + mdfld_backlight_device->props.max_brightness = BRIGHTNESS_MAX_LEVEL; + backlight_update_status(mdfld_backlight_device); + return 0; +} +#endif + +struct backlight_device *mdfld_get_backlight_device(void) +{ +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + return mdfld_backlight_device; +#else + return NULL; +#endif +} + +/* + * mdfld_save_display_registers + * + * Description: We are going to suspend so save current display + * register state. + * + * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio + */ +static int mdfld_save_display_registers(struct drm_device *dev, int pipenum) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct medfield_state *regs = &dev_priv->regs.mdfld; + struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum]; + const struct psb_offset *map = &dev_priv->regmap[pipenum]; + int i; + u32 *mipi_val; + + /* register */ + u32 mipi_reg = MIPI; + + switch (pipenum) { + case 0: + mipi_val = ®s->saveMIPI; + break; + case 1: + mipi_val = ®s->saveMIPI; + break; + case 2: + /* register */ + mipi_reg = MIPI_C; + /* pointer to values */ + mipi_val = ®s->saveMIPI_C; + break; + default: + DRM_ERROR("%s, invalid pipe number.\n", __func__); + return -EINVAL; + } + + /* Pipe & plane A info */ + pipe->dpll = PSB_RVDC32(map->dpll); + pipe->fp0 = PSB_RVDC32(map->fp0); + pipe->conf = PSB_RVDC32(map->conf); + pipe->htotal = PSB_RVDC32(map->htotal); + pipe->hblank = PSB_RVDC32(map->hblank); + pipe->hsync = PSB_RVDC32(map->hsync); + pipe->vtotal = PSB_RVDC32(map->vtotal); + pipe->vblank = PSB_RVDC32(map->vblank); + pipe->vsync = PSB_RVDC32(map->vsync); + pipe->src = PSB_RVDC32(map->src); + pipe->stride = PSB_RVDC32(map->stride); + pipe->linoff = PSB_RVDC32(map->linoff); + pipe->tileoff = PSB_RVDC32(map->tileoff); + pipe->size = PSB_RVDC32(map->size); + pipe->pos = PSB_RVDC32(map->pos); + pipe->surf = PSB_RVDC32(map->surf); + pipe->cntr = PSB_RVDC32(map->cntr); + pipe->status = PSB_RVDC32(map->status); + + /*save palette (gamma) */ + for (i = 0; i < 256; i++) + pipe->palette[i] = PSB_RVDC32(map->palette + (i << 2)); + + if (pipenum == 1) { + regs->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); + regs->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); + + regs->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL); + regs->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL); + return 0; + } + + *mipi_val = PSB_RVDC32(mipi_reg); + return 0; +} + +/* + * mdfld_restore_display_registers + * + * Description: We are going to resume so restore display register state. + * + * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio + */ +static int mdfld_restore_display_registers(struct drm_device *dev, int pipenum) +{ + /* To get panel out of ULPS mode. */ + u32 temp = 0; + u32 device_ready_reg = DEVICE_READY_REG; + struct drm_psb_private *dev_priv = dev->dev_private; + struct mdfld_dsi_config *dsi_config = NULL; + struct medfield_state *regs = &dev_priv->regs.mdfld; + struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum]; + const struct psb_offset *map = &dev_priv->regmap[pipenum]; + u32 i; + u32 dpll; + u32 timeout = 0; + + /* register */ + u32 mipi_reg = MIPI; + + /* values */ + u32 dpll_val = pipe->dpll; + u32 mipi_val = regs->saveMIPI; + + switch (pipenum) { + case 0: + dpll_val &= ~DPLL_VCO_ENABLE; + dsi_config = dev_priv->dsi_configs[0]; + break; + case 1: + dpll_val &= ~DPLL_VCO_ENABLE; + break; + case 2: + mipi_reg = MIPI_C; + mipi_val = regs->saveMIPI_C; + dsi_config = dev_priv->dsi_configs[1]; + break; + default: + DRM_ERROR("%s, invalid pipe number.\n", __func__); + return -EINVAL; + } + + /*make sure VGA plane is off. it initializes to on after reset!*/ + PSB_WVDC32(0x80000000, VGACNTRL); + + if (pipenum == 1) { + PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, map->dpll); + PSB_RVDC32(map->dpll); + + PSB_WVDC32(pipe->fp0, map->fp0); + } else { + + dpll = PSB_RVDC32(map->dpll); + + if (!(dpll & DPLL_VCO_ENABLE)) { + + /* When ungating power of DPLL, needs to wait 0.5us + before enable the VCO */ + if (dpll & MDFLD_PWR_GATE_EN) { + dpll &= ~MDFLD_PWR_GATE_EN; + PSB_WVDC32(dpll, map->dpll); + /* FIXME_MDFLD PO - change 500 to 1 after PO */ + udelay(500); + } + + PSB_WVDC32(pipe->fp0, map->fp0); + PSB_WVDC32(dpll_val, map->dpll); + /* FIXME_MDFLD PO - change 500 to 1 after PO */ + udelay(500); + + dpll_val |= DPLL_VCO_ENABLE; + PSB_WVDC32(dpll_val, map->dpll); + PSB_RVDC32(map->dpll); + + /* wait for DSI PLL to lock */ + while (timeout < 20000 && + !(PSB_RVDC32(map->conf) & PIPECONF_DSIPLL_LOCK)) { + udelay(150); + timeout++; + } + + if (timeout == 20000) { + DRM_ERROR("%s, can't lock DSIPLL.\n", + __func__); + return -EINVAL; + } + } + } + /* Restore mode */ + PSB_WVDC32(pipe->htotal, map->htotal); + PSB_WVDC32(pipe->hblank, map->hblank); + PSB_WVDC32(pipe->hsync, map->hsync); + PSB_WVDC32(pipe->vtotal, map->vtotal); + PSB_WVDC32(pipe->vblank, map->vblank); + PSB_WVDC32(pipe->vsync, map->vsync); + PSB_WVDC32(pipe->src, map->src); + PSB_WVDC32(pipe->status, map->status); + + /*set up the plane*/ + PSB_WVDC32(pipe->stride, map->stride); + PSB_WVDC32(pipe->linoff, map->linoff); + PSB_WVDC32(pipe->tileoff, map->tileoff); + PSB_WVDC32(pipe->size, map->size); + PSB_WVDC32(pipe->pos, map->pos); + PSB_WVDC32(pipe->surf, map->surf); + + if (pipenum == 1) { + /* restore palette (gamma) */ + /*DRM_UDELAY(50000); */ + for (i = 0; i < 256; i++) + PSB_WVDC32(pipe->palette[i], map->palette + (i << 2)); + + PSB_WVDC32(regs->savePFIT_CONTROL, PFIT_CONTROL); + PSB_WVDC32(regs->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); + + /*TODO: resume HDMI port */ + + /*TODO: resume pipe*/ + + /*enable the plane*/ + PSB_WVDC32(pipe->cntr & ~DISPLAY_PLANE_ENABLE, map->cntr); + + return 0; + } + + /*set up pipe related registers*/ + PSB_WVDC32(mipi_val, mipi_reg); + + /*setup MIPI adapter + MIPI IP registers*/ + if (dsi_config) + mdfld_dsi_controller_init(dsi_config, pipenum); + + if (in_atomic() || in_interrupt()) + mdelay(20); + else + msleep(20); + + /*enable the plane*/ + PSB_WVDC32(pipe->cntr, map->cntr); + + if (in_atomic() || in_interrupt()) + mdelay(20); + else + msleep(20); + + /* LP Hold Release */ + temp = REG_READ(mipi_reg); + temp |= LP_OUTPUT_HOLD_RELEASE; + REG_WRITE(mipi_reg, temp); + mdelay(1); + + + /* Set DSI host to exit from Utra Low Power State */ + temp = REG_READ(device_ready_reg); + temp &= ~ULPS_MASK; + temp |= 0x3; + temp |= EXIT_ULPS_DEV_READY; + REG_WRITE(device_ready_reg, temp); + mdelay(1); + + temp = REG_READ(device_ready_reg); + temp &= ~ULPS_MASK; + temp |= EXITING_ULPS; + REG_WRITE(device_ready_reg, temp); + mdelay(1); + + /*enable the pipe*/ + PSB_WVDC32(pipe->conf, map->conf); + + /* restore palette (gamma) */ + /*DRM_UDELAY(50000); */ + for (i = 0; i < 256; i++) + PSB_WVDC32(pipe->palette[i], map->palette + (i << 2)); + + return 0; +} + +static int mdfld_save_registers(struct drm_device *dev) +{ + /* mdfld_save_cursor_overlay_registers(dev); */ + mdfld_save_display_registers(dev, 0); + mdfld_save_display_registers(dev, 2); + mdfld_disable_crtc(dev, 0); + mdfld_disable_crtc(dev, 2); + + return 0; +} + +static int mdfld_restore_registers(struct drm_device *dev) +{ + mdfld_restore_display_registers(dev, 2); + mdfld_restore_display_registers(dev, 0); + /* mdfld_restore_cursor_overlay_registers(dev); */ + + return 0; +} + +static int mdfld_power_down(struct drm_device *dev) +{ + /* FIXME */ + return 0; +} + +static int mdfld_power_up(struct drm_device *dev) +{ + /* FIXME */ + return 0; +} + +/* Medfield */ +static const struct psb_offset mdfld_regmap[3] = { + { + .fp0 = MRST_FPA0, + .fp1 = MRST_FPA1, + .cntr = DSPACNTR, + .conf = PIPEACONF, + .src = PIPEASRC, + .dpll = MRST_DPLL_A, + .htotal = HTOTAL_A, + .hblank = HBLANK_A, + .hsync = HSYNC_A, + .vtotal = VTOTAL_A, + .vblank = VBLANK_A, + .vsync = VSYNC_A, + .stride = DSPASTRIDE, + .size = DSPASIZE, + .pos = DSPAPOS, + .surf = DSPASURF, + .addr = MRST_DSPABASE, + .status = PIPEASTAT, + .linoff = DSPALINOFF, + .tileoff = DSPATILEOFF, + .palette = PALETTE_A, + }, + { + .fp0 = MDFLD_DPLL_DIV0, + .cntr = DSPBCNTR, + .conf = PIPEBCONF, + .src = PIPEBSRC, + .dpll = MDFLD_DPLL_B, + .htotal = HTOTAL_B, + .hblank = HBLANK_B, + .hsync = HSYNC_B, + .vtotal = VTOTAL_B, + .vblank = VBLANK_B, + .vsync = VSYNC_B, + .stride = DSPBSTRIDE, + .size = DSPBSIZE, + .pos = DSPBPOS, + .surf = DSPBSURF, + .addr = MRST_DSPBBASE, + .status = PIPEBSTAT, + .linoff = DSPBLINOFF, + .tileoff = DSPBTILEOFF, + .palette = PALETTE_B, + }, + { + .fp0 = MRST_FPA0, /* This is what the old code did ?? */ + .cntr = DSPCCNTR, + .conf = PIPECCONF, + .src = PIPECSRC, + /* No DPLL_C */ + .dpll = MRST_DPLL_A, + .htotal = HTOTAL_C, + .hblank = HBLANK_C, + .hsync = HSYNC_C, + .vtotal = VTOTAL_C, + .vblank = VBLANK_C, + .vsync = VSYNC_C, + .stride = DSPCSTRIDE, + .size = DSPBSIZE, + .pos = DSPCPOS, + .surf = DSPCSURF, + .addr = MDFLD_DSPCBASE, + .status = PIPECSTAT, + .linoff = DSPCLINOFF, + .tileoff = DSPCTILEOFF, + .palette = PALETTE_C, + }, +}; + +static int mdfld_chip_setup(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + if (pci_enable_msi(dev->pdev)) + dev_warn(dev->dev, "Enabling MSI failed!\n"); + dev_priv->regmap = mdfld_regmap; + return mid_chip_setup(dev); +} + +const struct psb_ops mdfld_chip_ops = { + .name = "mdfld", + .accel_2d = 0, + .pipes = 3, + .crtcs = 3, + .lvds_mask = (1 << 1), + .hdmi_mask = (1 << 1), + .cursor_needs_phys = 0, + .sgx_offset = MRST_SGX_OFFSET, + + .chip_setup = mdfld_chip_setup, + .crtc_helper = &mdfld_helper_funcs, + .crtc_funcs = &psb_intel_crtc_funcs, + + .output_init = mdfld_output_init, + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE + .backlight_init = mdfld_backlight_init, +#endif + + .save_regs = mdfld_save_registers, + .restore_regs = mdfld_restore_registers, + .power_down = mdfld_power_down, + .power_up = mdfld_power_up, +}; -- cgit v1.2.3-54-g00ecf