From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 3 + drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 10 + drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 533 ++++++++++++++++++++++++ 3 files changed, 546 insertions(+) create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c (limited to 'drivers/gpu/drm/msm/dsi/pll') diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c index 5104fc9f9..5cd438f91 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.c @@ -151,6 +151,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev, case MSM_DSI_PHY_28NM_LP: pll = msm_dsi_pll_28nm_init(pdev, type, id); break; + case MSM_DSI_PHY_28NM_8960: + pll = msm_dsi_pll_28nm_8960_init(pdev, id); + break; default: pll = ERR_PTR(-ENXIO); break; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h index 063caa2c5..80b603833 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll.h @@ -93,6 +93,16 @@ static inline struct msm_dsi_pll *msm_dsi_pll_28nm_init( return ERR_PTR(-ENODEV); } #endif +#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY +struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev, + int id); +#else +struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev, + int id) +{ + return ERR_PTR(-ENODEV); +} +#endif #endif /* __DSI_PLL_H__ */ diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c new file mode 100644 index 000000000..38c90e1eb --- /dev/null +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c @@ -0,0 +1,533 @@ +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#include "dsi_pll.h" +#include "dsi.xml.h" + +/* + * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1): + * + * + * +------+ + * dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock) + * F * byte_clk | +------+ + * | bit clock divider (F / 8) + * | + * | +------+ + * o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG + * | +------+ | (sets parent rate) + * | byte clock divider (F) | + * | | + * | o---> To esc RCG + * | (doesn't set parent rate) + * | + * | +------+ + * o-----| DIV3 |----dsi0pll------o---> To dsi RCG + * +------+ | (sets parent rate) + * dsi clock divider (F * magic) | + * | + * o---> To pixel rcg + * (doesn't set parent rate) + */ + +#define POLL_MAX_READS 8000 +#define POLL_TIMEOUT_US 1 + +#define NUM_PROVIDED_CLKS 2 + +#define VCO_REF_CLK_RATE 27000000 +#define VCO_MIN_RATE 600000000 +#define VCO_MAX_RATE 1200000000 + +#define DSI_BYTE_PLL_CLK 0 +#define DSI_PIXEL_PLL_CLK 1 + +#define VCO_PREF_DIV_RATIO 27 + +struct pll_28nm_cached_state { + unsigned long vco_rate; + u8 postdiv3; + u8 postdiv2; + u8 postdiv1; +}; + +struct clk_bytediv { + struct clk_hw hw; + void __iomem *reg; +}; + +struct dsi_pll_28nm { + struct msm_dsi_pll base; + + int id; + struct platform_device *pdev; + void __iomem *mmio; + + /* custom byte clock divider */ + struct clk_bytediv *bytediv; + + /* private clocks: */ + struct clk *clks[NUM_DSI_CLOCKS_MAX]; + u32 num_clks; + + /* clock-provider: */ + struct clk *provided_clks[NUM_PROVIDED_CLKS]; + struct clk_onecell_data clk_data; + + struct pll_28nm_cached_state cached_state; +}; + +#define to_pll_28nm(x) container_of(x, struct dsi_pll_28nm, base) + +static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm, + int nb_tries, int timeout_us) +{ + bool pll_locked = false; + u32 val; + + while (nb_tries--) { + val = pll_read(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_RDY); + pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY); + + if (pll_locked) + break; + + udelay(timeout_us); + } + DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* "); + + return pll_locked; +} + +/* + * Clock Callbacks + */ +static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + void __iomem *base = pll_28nm->mmio; + u32 val, temp, fb_divider; + + DBG("rate=%lu, parent's=%lu", rate, parent_rate); + + temp = rate / 10; + val = VCO_REF_CLK_RATE / 10; + fb_divider = (temp * VCO_PREF_DIV_RATIO) / val; + fb_divider = fb_divider / 2 - 1; + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1, + fb_divider & 0xff); + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2); + + val |= (fb_divider >> 8) & 0x07; + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2, + val); + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); + + val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f; + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3, + val); + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6, + 0xf); + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + val |= 0x7 << 4; + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, + val); + + return 0; +} + +static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS, + POLL_TIMEOUT_US); +} + +static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msm_dsi_pll *pll = hw_clk_to_pll(hw); + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + void __iomem *base = pll_28nm->mmio; + unsigned long vco_rate; + u32 status, fb_divider, temp, ref_divider; + + VERB("parent_rate=%lu", parent_rate); + + status = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0); + + if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) { + fb_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1); + fb_divider &= 0xff; + temp = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07; + fb_divider = (temp << 8) | fb_divider; + fb_divider += 1; + + ref_divider = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3); + ref_divider &= 0x3f; + ref_divider += 1; + + /* multiply by 2 */ + vco_rate = (parent_rate / ref_divider) * fb_divider * 2; + } else { + vco_rate = 0; + } + + DBG("returning vco rate = %lu", vco_rate); + + return vco_rate; +} + +static const struct clk_ops clk_ops_dsi_pll_28nm_vco = { + .round_rate = msm_dsi_pll_helper_clk_round_rate, + .set_rate = dsi_pll_28nm_clk_set_rate, + .recalc_rate = dsi_pll_28nm_clk_recalc_rate, + .prepare = msm_dsi_pll_helper_clk_prepare, + .unprepare = msm_dsi_pll_helper_clk_unprepare, + .is_enabled = dsi_pll_28nm_clk_is_enabled, +}; + +/* + * Custom byte clock divier clk_ops + * + * This clock is the entry point to configuring the PLL. The user (dsi host) + * will set this clock's rate to the desired byte clock rate. The VCO lock + * frequency is a multiple of the byte clock rate. The multiplication factor + * (shown as F in the diagram above) is a function of the byte clock rate. + * + * This custom divider clock ensures that its parent (VCO) is set to the + * desired rate, and that the byte clock postdivider (POSTDIV2) is configured + * accordingly + */ +#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw) + +static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_bytediv *bytediv = to_clk_bytediv(hw); + unsigned int div; + + div = pll_read(bytediv->reg) & 0xff; + + return parent_rate / (div + 1); +} + +/* find multiplication factor(wrt byte clock) at which the VCO should be set */ +static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate) +{ + unsigned long bit_mhz; + + /* convert to bit clock in Mhz */ + bit_mhz = (byte_clk_rate * 8) / 1000000; + + if (bit_mhz < 125) + return 64; + else if (bit_mhz < 250) + return 32; + else if (bit_mhz < 600) + return 16; + else + return 8; +} + +static long clk_bytediv_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long best_parent; + unsigned int factor; + + factor = get_vco_mul_factor(rate); + + best_parent = rate * factor; + *prate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent); + + return *prate / factor; +} + +static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_bytediv *bytediv = to_clk_bytediv(hw); + u32 val; + unsigned int factor; + + factor = get_vco_mul_factor(rate); + + val = pll_read(bytediv->reg); + val |= (factor - 1) & 0xff; + pll_write(bytediv->reg, val); + + return 0; +} + +/* Our special byte clock divider ops */ +static const struct clk_ops clk_bytediv_ops = { + .round_rate = clk_bytediv_round_rate, + .set_rate = clk_bytediv_set_rate, + .recalc_rate = clk_bytediv_recalc_rate, +}; + +/* + * PLL Callbacks + */ +static int dsi_pll_28nm_enable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct device *dev = &pll_28nm->pdev->dev; + void __iomem *base = pll_28nm->mmio; + bool locked; + unsigned int bit_div, byte_div; + int max_reads = 1000, timeout_us = 100; + u32 val; + + DBG("id=%d", pll_28nm->id); + + /* + * before enabling the PLL, configure the bit clock divider since we + * don't expose it as a clock to the outside world + * 1: read back the byte clock divider that should already be set + * 2: divide by 8 to get bit clock divider + * 3: write it to POSTDIV1 + */ + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); + byte_div = val + 1; + bit_div = byte_div / 8; + + val = pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + val &= ~0xf; + val |= (bit_div - 1); + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, val); + + /* enable the PLL */ + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, + DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE); + + locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us); + + if (unlikely(!locked)) + dev_err(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL lock success"); + + return locked ? 0 : -EINVAL; +} + +static void dsi_pll_28nm_disable_seq(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + DBG("id=%d", pll_28nm->id); + pll_write(pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_0, 0x00); +} + +static void dsi_pll_28nm_save_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + + cached_state->postdiv3 = + pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10); + cached_state->postdiv2 = + pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9); + cached_state->postdiv1 = + pll_read(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8); + + cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw); +} + +static int dsi_pll_28nm_restore_state(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state; + void __iomem *base = pll_28nm->mmio; + int ret; + + ret = dsi_pll_28nm_clk_set_rate(&pll->clk_hw, + cached_state->vco_rate, 0); + if (ret) { + dev_err(&pll_28nm->pdev->dev, + "restore vco rate failed. ret=%d\n", ret); + return ret; + } + + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, + cached_state->postdiv3); + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9, + cached_state->postdiv2); + pll_write(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8, + cached_state->postdiv1); + + return 0; +} + +static int dsi_pll_28nm_get_provider(struct msm_dsi_pll *pll, + struct clk **byte_clk_provider, + struct clk **pixel_clk_provider) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + if (byte_clk_provider) + *byte_clk_provider = pll_28nm->provided_clks[DSI_BYTE_PLL_CLK]; + if (pixel_clk_provider) + *pixel_clk_provider = + pll_28nm->provided_clks[DSI_PIXEL_PLL_CLK]; + + return 0; +} + +static void dsi_pll_28nm_destroy(struct msm_dsi_pll *pll) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(pll); + + msm_dsi_pll_helper_unregister_clks(pll_28nm->pdev, + pll_28nm->clks, pll_28nm->num_clks); +} + +static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) +{ + char *clk_name, *parent_name, *vco_name; + struct clk_init_data vco_init = { + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .ops = &clk_ops_dsi_pll_28nm_vco, + }; + struct device *dev = &pll_28nm->pdev->dev; + struct clk **clks = pll_28nm->clks; + struct clk **provided_clks = pll_28nm->provided_clks; + struct clk_bytediv *bytediv; + struct clk_init_data bytediv_init = { }; + int ret, num = 0; + + DBG("%d", pll_28nm->id); + + bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL); + if (!bytediv) + return -ENOMEM; + + vco_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!vco_name) + return -ENOMEM; + + parent_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!parent_name) + return -ENOMEM; + + clk_name = devm_kzalloc(dev, 32, GFP_KERNEL); + if (!clk_name) + return -ENOMEM; + + pll_28nm->bytediv = bytediv; + + snprintf(vco_name, 32, "dsi%dvco_clk", pll_28nm->id); + vco_init.name = vco_name; + + pll_28nm->base.clk_hw.init = &vco_init; + + clks[num++] = clk_register(dev, &pll_28nm->base.clk_hw); + + /* prepare and register bytediv */ + bytediv->hw.init = &bytediv_init; + bytediv->reg = pll_28nm->mmio + REG_DSI_28nm_8960_PHY_PLL_CTRL_9; + + snprintf(parent_name, 32, "dsi%dvco_clk", pll_28nm->id); + snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->id); + + bytediv_init.name = clk_name; + bytediv_init.ops = &clk_bytediv_ops; + bytediv_init.flags = CLK_SET_RATE_PARENT; + bytediv_init.parent_names = (const char * const *) &parent_name; + bytediv_init.num_parents = 1; + + /* DIV2 */ + clks[num++] = provided_clks[DSI_BYTE_PLL_CLK] = + clk_register(dev, &bytediv->hw); + + snprintf(clk_name, 32, "dsi%dpll", pll_28nm->id); + /* DIV3 */ + clks[num++] = provided_clks[DSI_PIXEL_PLL_CLK] = + clk_register_divider(dev, clk_name, + parent_name, 0, pll_28nm->mmio + + REG_DSI_28nm_8960_PHY_PLL_CTRL_10, + 0, 8, 0, NULL); + + pll_28nm->num_clks = num; + + pll_28nm->clk_data.clk_num = NUM_PROVIDED_CLKS; + pll_28nm->clk_data.clks = provided_clks; + + ret = of_clk_add_provider(dev->of_node, + of_clk_src_onecell_get, &pll_28nm->clk_data); + if (ret) { + dev_err(dev, "failed to register clk provider: %d\n", ret); + return ret; + } + + return 0; +} + +struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev, + int id) +{ + struct dsi_pll_28nm *pll_28nm; + struct msm_dsi_pll *pll; + int ret; + + if (!pdev) + return ERR_PTR(-ENODEV); + + pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL); + if (!pll_28nm) + return ERR_PTR(-ENOMEM); + + pll_28nm->pdev = pdev; + pll_28nm->id = id + 1; + + pll_28nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL"); + if (IS_ERR_OR_NULL(pll_28nm->mmio)) { + dev_err(&pdev->dev, "%s: failed to map pll base\n", __func__); + return ERR_PTR(-ENOMEM); + } + + pll = &pll_28nm->base; + pll->min_rate = VCO_MIN_RATE; + pll->max_rate = VCO_MAX_RATE; + pll->get_provider = dsi_pll_28nm_get_provider; + pll->destroy = dsi_pll_28nm_destroy; + pll->disable_seq = dsi_pll_28nm_disable_seq; + pll->save_state = dsi_pll_28nm_save_state; + pll->restore_state = dsi_pll_28nm_restore_state; + + pll->en_seq_cnt = 1; + pll->enable_seqs[0] = dsi_pll_28nm_enable_seq; + + ret = pll_28nm_register(pll_28nm); + if (ret) { + dev_err(&pdev->dev, "failed to register PLL: %d\n", ret); + return ERR_PTR(ret); + } + + return pll; +} -- cgit v1.2.3-54-g00ecf