From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/hid/hid-rmi.c | 1282 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1282 insertions(+) create mode 100644 drivers/hid/hid-rmi.c (limited to 'drivers/hid/hid-rmi.c') diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c new file mode 100644 index 000000000..368ffdf2c --- /dev/null +++ b/drivers/hid/hid-rmi.c @@ -0,0 +1,1282 @@ +/* + * Copyright (c) 2013 Andrew Duggan + * Copyright (c) 2013 Synaptics Incorporated + * Copyright (c) 2014 Benjamin Tissoires + * Copyright (c) 2014 Red Hat, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "hid-ids.h" + +#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ +#define RMI_WRITE_REPORT_ID 0x09 /* Output Report */ +#define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */ +#define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */ +#define RMI_ATTN_REPORT_ID 0x0c /* Input Report */ +#define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */ + +/* flags */ +#define RMI_READ_REQUEST_PENDING BIT(0) +#define RMI_READ_DATA_PENDING BIT(1) +#define RMI_STARTED BIT(2) + +/* device flags */ +#define RMI_DEVICE BIT(0) +#define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) + +enum rmi_mode_type { + RMI_MODE_OFF = 0, + RMI_MODE_ATTN_REPORTS = 1, + RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, +}; + +struct rmi_function { + unsigned page; /* page of the function */ + u16 query_base_addr; /* base address for queries */ + u16 command_base_addr; /* base address for commands */ + u16 control_base_addr; /* base address for controls */ + u16 data_base_addr; /* base address for datas */ + unsigned int interrupt_base; /* cross-function interrupt number + * (uniq in the device)*/ + unsigned int interrupt_count; /* number of interrupts */ + unsigned int report_size; /* size of a report */ + unsigned long irq_mask; /* mask of the interrupts + * (to be applied against ATTN IRQ) */ +}; + +/** + * struct rmi_data - stores information for hid communication + * + * @page_mutex: Locks current page to avoid changing pages in unexpected ways. + * @page: Keeps track of the current virtual page + * + * @wait: Used for waiting for read data + * + * @writeReport: output buffer when writing RMI registers + * @readReport: input buffer when reading RMI registers + * + * @input_report_size: size of an input report (advertised by HID) + * @output_report_size: size of an output report (advertised by HID) + * + * @flags: flags for the current device (started, reading, etc...) + * + * @f11: placeholder of internal RMI function F11 description + * @f30: placeholder of internal RMI function F30 description + * + * @max_fingers: maximum finger count reported by the device + * @max_x: maximum x value reported by the device + * @max_y: maximum y value reported by the device + * + * @gpio_led_count: count of GPIOs + LEDs reported by F30 + * @button_count: actual physical buttons count + * @button_mask: button mask used to decode GPIO ATTN reports + * @button_state_mask: pull state of the buttons + * + * @input: pointer to the kernel input device + * + * @reset_work: worker which will be called in case of a mouse report + * @hdev: pointer to the struct hid_device + */ +struct rmi_data { + struct mutex page_mutex; + int page; + + wait_queue_head_t wait; + + u8 *writeReport; + u8 *readReport; + + int input_report_size; + int output_report_size; + + unsigned long flags; + + struct rmi_function f01; + struct rmi_function f11; + struct rmi_function f30; + + unsigned int max_fingers; + unsigned int max_x; + unsigned int max_y; + unsigned int x_size_mm; + unsigned int y_size_mm; + + unsigned int gpio_led_count; + unsigned int button_count; + unsigned long button_mask; + unsigned long button_state_mask; + + struct input_dev *input; + + struct work_struct reset_work; + struct hid_device *hdev; + + unsigned long device_flags; + unsigned long firmware_id; +}; + +#define RMI_PAGE(addr) (((addr) >> 8) & 0xff) + +static int rmi_write_report(struct hid_device *hdev, u8 *report, int len); + +/** + * rmi_set_page - Set RMI page + * @hdev: The pointer to the hid_device struct + * @page: The new page address. + * + * RMI devices have 16-bit addressing, but some of the physical + * implementations (like SMBus) only have 8-bit addressing. So RMI implements + * a page address at 0xff of every page so we can reliable page addresses + * every 256 registers. + * + * The page_mutex lock must be held when this function is entered. + * + * Returns zero on success, non-zero on failure. + */ +static int rmi_set_page(struct hid_device *hdev, u8 page) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + int retval; + + data->writeReport[0] = RMI_WRITE_REPORT_ID; + data->writeReport[1] = 1; + data->writeReport[2] = 0xFF; + data->writeReport[4] = page; + + retval = rmi_write_report(hdev, data->writeReport, + data->output_report_size); + if (retval != data->output_report_size) { + dev_err(&hdev->dev, + "%s: set page failed: %d.", __func__, retval); + return retval; + } + + data->page = page; + return 0; +} + +static int rmi_set_mode(struct hid_device *hdev, u8 mode) +{ + int ret; + u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode}; + + ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf, + sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT); + if (ret < 0) { + dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode, + ret); + return ret; + } + + return 0; +} + +static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) +{ + int ret; + + ret = hid_hw_output_report(hdev, (void *)report, len); + if (ret < 0) { + dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret); + return ret; + } + + return ret; +} + +static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf, + const int len) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + int ret; + int bytes_read; + int bytes_needed; + int retries; + int read_input_count; + + mutex_lock(&data->page_mutex); + + if (RMI_PAGE(addr) != data->page) { + ret = rmi_set_page(hdev, RMI_PAGE(addr)); + if (ret < 0) + goto exit; + } + + for (retries = 5; retries > 0; retries--) { + data->writeReport[0] = RMI_READ_ADDR_REPORT_ID; + data->writeReport[1] = 0; /* old 1 byte read count */ + data->writeReport[2] = addr & 0xFF; + data->writeReport[3] = (addr >> 8) & 0xFF; + data->writeReport[4] = len & 0xFF; + data->writeReport[5] = (len >> 8) & 0xFF; + + set_bit(RMI_READ_REQUEST_PENDING, &data->flags); + + ret = rmi_write_report(hdev, data->writeReport, + data->output_report_size); + if (ret != data->output_report_size) { + clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); + dev_err(&hdev->dev, + "failed to write request output report (%d)\n", + ret); + goto exit; + } + + bytes_read = 0; + bytes_needed = len; + while (bytes_read < len) { + if (!wait_event_timeout(data->wait, + test_bit(RMI_READ_DATA_PENDING, &data->flags), + msecs_to_jiffies(1000))) { + hid_warn(hdev, "%s: timeout elapsed\n", + __func__); + ret = -EAGAIN; + break; + } + + read_input_count = data->readReport[1]; + memcpy(buf + bytes_read, &data->readReport[2], + read_input_count < bytes_needed ? + read_input_count : bytes_needed); + + bytes_read += read_input_count; + bytes_needed -= read_input_count; + clear_bit(RMI_READ_DATA_PENDING, &data->flags); + } + + if (ret >= 0) { + ret = 0; + break; + } + } + +exit: + clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); + mutex_unlock(&data->page_mutex); + return ret; +} + +static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf) +{ + return rmi_read_block(hdev, addr, buf, 1); +} + +static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf, + const int len) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + int ret; + + mutex_lock(&data->page_mutex); + + if (RMI_PAGE(addr) != data->page) { + ret = rmi_set_page(hdev, RMI_PAGE(addr)); + if (ret < 0) + goto exit; + } + + data->writeReport[0] = RMI_WRITE_REPORT_ID; + data->writeReport[1] = len; + data->writeReport[2] = addr & 0xFF; + data->writeReport[3] = (addr >> 8) & 0xFF; + memcpy(&data->writeReport[4], buf, len); + + ret = rmi_write_report(hdev, data->writeReport, + data->output_report_size); + if (ret < 0) { + dev_err(&hdev->dev, + "failed to write request output report (%d)\n", + ret); + goto exit; + } + ret = 0; + +exit: + mutex_unlock(&data->page_mutex); + return ret; +} + +static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf) +{ + return rmi_write_block(hdev, addr, buf, 1); +} + +static void rmi_f11_process_touch(struct rmi_data *hdata, int slot, + u8 finger_state, u8 *touch_data) +{ + int x, y, wx, wy; + int wide, major, minor; + int z; + + input_mt_slot(hdata->input, slot); + input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER, + finger_state == 0x01); + if (finger_state == 0x01) { + x = (touch_data[0] << 4) | (touch_data[2] & 0x0F); + y = (touch_data[1] << 4) | (touch_data[2] >> 4); + wx = touch_data[3] & 0x0F; + wy = touch_data[3] >> 4; + wide = (wx > wy); + major = max(wx, wy); + minor = min(wx, wy); + z = touch_data[4]; + + /* y is inverted */ + y = hdata->max_y - y; + + input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x); + input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y); + input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide); + input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z); + input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); + input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); + } +} + +static void rmi_reset_work(struct work_struct *work) +{ + struct rmi_data *hdata = container_of(work, struct rmi_data, + reset_work); + + /* switch the device to RMI if we receive a generic mouse report */ + rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS); +} + +static inline int rmi_schedule_reset(struct hid_device *hdev) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + return schedule_work(&hdata->reset_work); +} + +static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data, + int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + int offset; + int i; + + if (!(irq & hdata->f11.irq_mask) || size <= 0) + return 0; + + offset = (hdata->max_fingers >> 2) + 1; + for (i = 0; i < hdata->max_fingers; i++) { + int fs_byte_position = i >> 2; + int fs_bit_position = (i & 0x3) << 1; + int finger_state = (data[fs_byte_position] >> fs_bit_position) & + 0x03; + int position = offset + 5 * i; + + if (position + 5 > size) { + /* partial report, go on with what we received */ + printk_once(KERN_WARNING + "%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n", + dev_driver_string(&hdev->dev), + dev_name(&hdev->dev)); + hid_dbg(hdev, "Incomplete finger report\n"); + break; + } + + rmi_f11_process_touch(hdata, i, finger_state, &data[position]); + } + input_mt_sync_frame(hdata->input); + input_sync(hdata->input); + return hdata->f11.report_size; +} + +static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data, + int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + int i; + int button = 0; + bool value; + + if (!(irq & hdata->f30.irq_mask)) + return 0; + + if (size < (int)hdata->f30.report_size) { + hid_warn(hdev, "Click Button pressed, but the click data is missing\n"); + return 0; + } + + for (i = 0; i < hdata->gpio_led_count; i++) { + if (test_bit(i, &hdata->button_mask)) { + value = (data[i / 8] >> (i & 0x07)) & BIT(0); + if (test_bit(i, &hdata->button_state_mask)) + value = !value; + input_event(hdata->input, EV_KEY, BTN_LEFT + button++, + value); + } + } + return hdata->f30.report_size; +} + +static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + unsigned long irq_mask = 0; + unsigned index = 2; + + if (!(test_bit(RMI_STARTED, &hdata->flags))) + return 0; + + irq_mask |= hdata->f11.irq_mask; + irq_mask |= hdata->f30.irq_mask; + + if (data[1] & ~irq_mask) + hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n", + data[1] & ~irq_mask, __FILE__, __LINE__); + + if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) { + index += rmi_f11_input_event(hdev, data[1], &data[index], + size - index); + index += rmi_f30_input_event(hdev, data[1], &data[index], + size - index); + } else { + index += rmi_f30_input_event(hdev, data[1], &data[index], + size - index); + index += rmi_f11_input_event(hdev, data[1], &data[index], + size - index); + } + + return 1; +} + +static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + + if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) { + hid_dbg(hdev, "no read request pending\n"); + return 0; + } + + memcpy(hdata->readReport, data, size < hdata->input_report_size ? + size : hdata->input_report_size); + set_bit(RMI_READ_DATA_PENDING, &hdata->flags); + wake_up(&hdata->wait); + + return 1; +} + +static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size) +{ + int valid_size = size; + /* + * On the Dell XPS 13 9333, the bus sometimes get confused and fills + * the report with a sentinel value "ff". Synaptics told us that such + * behavior does not comes from the touchpad itself, so we filter out + * such reports here. + */ + + while ((data[valid_size - 1] == 0xff) && valid_size > 0) + valid_size--; + + return valid_size; +} + +static int rmi_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int size) +{ + size = rmi_check_sanity(hdev, data, size); + if (size < 2) + return 0; + + switch (data[0]) { + case RMI_READ_DATA_REPORT_ID: + return rmi_read_data_event(hdev, data, size); + case RMI_ATTN_REPORT_ID: + return rmi_input_event(hdev, data, size); + default: + return 1; + } + + return 0; +} + +static int rmi_event(struct hid_device *hdev, struct hid_field *field, + struct hid_usage *usage, __s32 value) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + + if ((data->device_flags & RMI_DEVICE) && + (field->application == HID_GD_POINTER || + field->application == HID_GD_MOUSE)) { + if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) { + if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) + return 0; + + if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y) + && !value) + return 1; + } + + rmi_schedule_reset(hdev); + return 1; + } + + return 0; +} + +#ifdef CONFIG_PM +static int rmi_post_reset(struct hid_device *hdev) +{ + return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); +} + +static int rmi_post_resume(struct hid_device *hdev) +{ + return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); +} +#endif /* CONFIG_PM */ + +#define RMI4_MAX_PAGE 0xff +#define RMI4_PAGE_SIZE 0x0100 + +#define PDT_START_SCAN_LOCATION 0x00e9 +#define PDT_END_SCAN_LOCATION 0x0005 +#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff) + +struct pdt_entry { + u8 query_base_addr:8; + u8 command_base_addr:8; + u8 control_base_addr:8; + u8 data_base_addr:8; + u8 interrupt_source_count:3; + u8 bits3and4:2; + u8 function_version:2; + u8 bit7:1; + u8 function_number:8; +} __attribute__((__packed__)); + +static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count) +{ + return GENMASK(irq_count + irq_base - 1, irq_base); +} + +static void rmi_register_function(struct rmi_data *data, + struct pdt_entry *pdt_entry, int page, unsigned interrupt_count) +{ + struct rmi_function *f = NULL; + u16 page_base = page << 8; + + switch (pdt_entry->function_number) { + case 0x01: + f = &data->f01; + break; + case 0x11: + f = &data->f11; + break; + case 0x30: + f = &data->f30; + break; + } + + if (f) { + f->page = page; + f->query_base_addr = page_base | pdt_entry->query_base_addr; + f->command_base_addr = page_base | pdt_entry->command_base_addr; + f->control_base_addr = page_base | pdt_entry->control_base_addr; + f->data_base_addr = page_base | pdt_entry->data_base_addr; + f->interrupt_base = interrupt_count; + f->interrupt_count = pdt_entry->interrupt_source_count; + f->irq_mask = rmi_gen_mask(f->interrupt_base, + f->interrupt_count); + } +} + +static int rmi_scan_pdt(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + struct pdt_entry entry; + int page; + bool page_has_function; + int i; + int retval; + int interrupt = 0; + u16 page_start, pdt_start , pdt_end; + + hid_info(hdev, "Scanning PDT...\n"); + + for (page = 0; (page <= RMI4_MAX_PAGE); page++) { + page_start = RMI4_PAGE_SIZE * page; + pdt_start = page_start + PDT_START_SCAN_LOCATION; + pdt_end = page_start + PDT_END_SCAN_LOCATION; + + page_has_function = false; + for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) { + retval = rmi_read_block(hdev, i, &entry, sizeof(entry)); + if (retval) { + hid_err(hdev, + "Read of PDT entry at %#06x failed.\n", + i); + goto error_exit; + } + + if (RMI4_END_OF_PDT(entry.function_number)) + break; + + page_has_function = true; + + hid_info(hdev, "Found F%02X on page %#04x\n", + entry.function_number, page); + + rmi_register_function(data, &entry, page, interrupt); + interrupt += entry.interrupt_source_count; + } + + if (!page_has_function) + break; + } + + hid_info(hdev, "%s: Done with PDT scan.\n", __func__); + retval = 0; + +error_exit: + return retval; +} + +#define RMI_DEVICE_F01_BASIC_QUERY_LEN 11 + +static int rmi_populate_f01(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN]; + u8 info[3]; + int ret; + bool has_query42; + bool has_lts; + bool has_sensor_id; + bool has_ds4_queries = false; + bool has_build_id_query = false; + bool has_package_id_query = false; + u16 query_offset = data->f01.query_base_addr; + u16 prod_info_addr; + u8 ds4_query_len; + + ret = rmi_read_block(hdev, query_offset, basic_queries, + RMI_DEVICE_F01_BASIC_QUERY_LEN); + if (ret) { + hid_err(hdev, "Can not read basic queries from Function 0x1.\n"); + return ret; + } + + has_lts = !!(basic_queries[0] & BIT(2)); + has_sensor_id = !!(basic_queries[1] & BIT(3)); + has_query42 = !!(basic_queries[1] & BIT(7)); + + query_offset += 11; + prod_info_addr = query_offset + 6; + query_offset += 10; + + if (has_lts) + query_offset += 20; + + if (has_sensor_id) + query_offset++; + + if (has_query42) { + ret = rmi_read(hdev, query_offset, info); + if (ret) { + hid_err(hdev, "Can not read query42.\n"); + return ret; + } + has_ds4_queries = !!(info[0] & BIT(0)); + query_offset++; + } + + if (has_ds4_queries) { + ret = rmi_read(hdev, query_offset, &ds4_query_len); + if (ret) { + hid_err(hdev, "Can not read DS4 Query length.\n"); + return ret; + } + query_offset++; + + if (ds4_query_len > 0) { + ret = rmi_read(hdev, query_offset, info); + if (ret) { + hid_err(hdev, "Can not read DS4 query.\n"); + return ret; + } + + has_package_id_query = !!(info[0] & BIT(0)); + has_build_id_query = !!(info[0] & BIT(1)); + } + } + + if (has_package_id_query) + prod_info_addr++; + + if (has_build_id_query) { + ret = rmi_read_block(hdev, prod_info_addr, info, 3); + if (ret) { + hid_err(hdev, "Can not read product info.\n"); + return ret; + } + + data->firmware_id = info[1] << 8 | info[0]; + data->firmware_id += info[2] * 65536; + } + + return 0; +} + +static int rmi_populate_f11(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + u8 buf[20]; + int ret; + bool has_query9; + bool has_query10 = false; + bool has_query11; + bool has_query12; + bool has_query27; + bool has_query28; + bool has_query36 = false; + bool has_physical_props; + bool has_gestures; + bool has_rel; + bool has_data40 = false; + bool has_dribble = false; + bool has_palm_detect = false; + unsigned x_size, y_size; + u16 query_offset; + + if (!data->f11.query_base_addr) { + hid_err(hdev, "No 2D sensor found, giving up.\n"); + return -ENODEV; + } + + /* query 0 contains some useful information */ + ret = rmi_read(hdev, data->f11.query_base_addr, buf); + if (ret) { + hid_err(hdev, "can not get query 0: %d.\n", ret); + return ret; + } + has_query9 = !!(buf[0] & BIT(3)); + has_query11 = !!(buf[0] & BIT(4)); + has_query12 = !!(buf[0] & BIT(5)); + has_query27 = !!(buf[0] & BIT(6)); + has_query28 = !!(buf[0] & BIT(7)); + + /* query 1 to get the max number of fingers */ + ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf); + if (ret) { + hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret); + return ret; + } + data->max_fingers = (buf[0] & 0x07) + 1; + if (data->max_fingers > 5) + data->max_fingers = 10; + + data->f11.report_size = data->max_fingers * 5 + + DIV_ROUND_UP(data->max_fingers, 4); + + if (!(buf[0] & BIT(4))) { + hid_err(hdev, "No absolute events, giving up.\n"); + return -ENODEV; + } + + has_rel = !!(buf[0] & BIT(3)); + has_gestures = !!(buf[0] & BIT(5)); + + ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf); + if (ret) { + hid_err(hdev, "can not get absolute data sources: %d.\n", ret); + return ret; + } + + has_dribble = !!(buf[0] & BIT(4)); + + /* + * At least 4 queries are guaranteed to be present in F11 + * +1 for query 5 which is present since absolute events are + * reported and +1 for query 12. + */ + query_offset = 6; + + if (has_rel) + ++query_offset; /* query 6 is present */ + + if (has_gestures) { + /* query 8 to find out if query 10 exists */ + ret = rmi_read(hdev, + data->f11.query_base_addr + query_offset + 1, buf); + if (ret) { + hid_err(hdev, "can not read gesture information: %d.\n", + ret); + return ret; + } + has_palm_detect = !!(buf[0] & BIT(0)); + has_query10 = !!(buf[0] & BIT(2)); + + query_offset += 2; /* query 7 and 8 are present */ + } + + if (has_query9) + ++query_offset; + + if (has_query10) + ++query_offset; + + if (has_query11) + ++query_offset; + + /* query 12 to know if the physical properties are reported */ + if (has_query12) { + ret = rmi_read(hdev, data->f11.query_base_addr + + query_offset, buf); + if (ret) { + hid_err(hdev, "can not get query 12: %d.\n", ret); + return ret; + } + has_physical_props = !!(buf[0] & BIT(5)); + + if (has_physical_props) { + query_offset += 1; + ret = rmi_read_block(hdev, + data->f11.query_base_addr + + query_offset, buf, 4); + if (ret) { + hid_err(hdev, "can not read query 15-18: %d.\n", + ret); + return ret; + } + + x_size = buf[0] | (buf[1] << 8); + y_size = buf[2] | (buf[3] << 8); + + data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10); + data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10); + + hid_info(hdev, "%s: size in mm: %d x %d\n", + __func__, data->x_size_mm, data->y_size_mm); + + /* + * query 15 - 18 contain the size of the sensor + * and query 19 - 26 contain bezel dimensions + */ + query_offset += 12; + } + } + + if (has_query27) + ++query_offset; + + if (has_query28) { + ret = rmi_read(hdev, data->f11.query_base_addr + + query_offset, buf); + if (ret) { + hid_err(hdev, "can not get query 28: %d.\n", ret); + return ret; + } + + has_query36 = !!(buf[0] & BIT(6)); + } + + if (has_query36) { + query_offset += 2; + ret = rmi_read(hdev, data->f11.query_base_addr + + query_offset, buf); + if (ret) { + hid_err(hdev, "can not get query 36: %d.\n", ret); + return ret; + } + + has_data40 = !!(buf[0] & BIT(5)); + } + + + if (has_data40) + data->f11.report_size += data->max_fingers * 2; + + /* + * retrieve the ctrl registers + * the ctrl register has a size of 20 but a fw bug split it into 16 + 4, + * and there is no way to know if the first 20 bytes are here or not. + * We use only the first 12 bytes, so get only them. + */ + ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 12); + if (ret) { + hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret); + return ret; + } + + data->max_x = buf[6] | (buf[7] << 8); + data->max_y = buf[8] | (buf[9] << 8); + + if (has_dribble) { + buf[0] = buf[0] & ~BIT(6); + ret = rmi_write(hdev, data->f11.control_base_addr, buf); + if (ret) { + hid_err(hdev, "can not write to control reg 0: %d.\n", + ret); + return ret; + } + } + + if (has_palm_detect) { + buf[11] = buf[11] & ~BIT(0); + ret = rmi_write(hdev, data->f11.control_base_addr + 11, + &buf[11]); + if (ret) { + hid_err(hdev, "can not write to control reg 11: %d.\n", + ret); + return ret; + } + } + + return 0; +} + +static int rmi_populate_f30(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + u8 buf[20]; + int ret; + bool has_gpio, has_led; + unsigned bytes_per_ctrl; + u8 ctrl2_addr; + int ctrl2_3_length; + int i; + + /* function F30 is for physical buttons */ + if (!data->f30.query_base_addr) { + hid_err(hdev, "No GPIO/LEDs found, giving up.\n"); + return -ENODEV; + } + + ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2); + if (ret) { + hid_err(hdev, "can not get F30 query registers: %d.\n", ret); + return ret; + } + + has_gpio = !!(buf[0] & BIT(3)); + has_led = !!(buf[0] & BIT(2)); + data->gpio_led_count = buf[1] & 0x1f; + + /* retrieve ctrl 2 & 3 registers */ + bytes_per_ctrl = (data->gpio_led_count + 7) / 8; + /* Ctrl0 is present only if both has_gpio and has_led are set*/ + ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0; + /* Ctrl1 is always be present */ + ctrl2_addr += bytes_per_ctrl; + ctrl2_3_length = 2 * bytes_per_ctrl; + + data->f30.report_size = bytes_per_ctrl; + + ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr, + buf, ctrl2_3_length); + if (ret) { + hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n", + ctrl2_3_length, ret); + return ret; + } + + for (i = 0; i < data->gpio_led_count; i++) { + int byte_position = i >> 3; + int bit_position = i & 0x07; + u8 dir_byte = buf[byte_position]; + u8 data_byte = buf[byte_position + bytes_per_ctrl]; + bool dir = (dir_byte >> bit_position) & BIT(0); + bool dat = (data_byte >> bit_position) & BIT(0); + + if (dir == 0) { + /* input mode */ + if (dat) { + /* actual buttons have pull up resistor */ + data->button_count++; + set_bit(i, &data->button_mask); + set_bit(i, &data->button_state_mask); + } + } + + } + + return 0; +} + +static int rmi_populate(struct hid_device *hdev) +{ + int ret; + + ret = rmi_scan_pdt(hdev); + if (ret) { + hid_err(hdev, "PDT scan failed with code %d.\n", ret); + return ret; + } + + ret = rmi_populate_f01(hdev); + if (ret) { + hid_err(hdev, "Error while initializing F01 (%d).\n", ret); + return ret; + } + + ret = rmi_populate_f11(hdev); + if (ret) { + hid_err(hdev, "Error while initializing F11 (%d).\n", ret); + return ret; + } + + ret = rmi_populate_f30(hdev); + if (ret) + hid_warn(hdev, "Error while initializing F30 (%d).\n", ret); + + return 0; +} + +static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + struct input_dev *input = hi->input; + int ret; + int res_x, res_y, i; + + data->input = input; + + hid_dbg(hdev, "Opening low level driver\n"); + ret = hid_hw_open(hdev); + if (ret) + return; + + if (!(data->device_flags & RMI_DEVICE)) + return; + + /* Allow incoming hid reports */ + hid_device_io_start(hdev); + + ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); + if (ret < 0) { + dev_err(&hdev->dev, "failed to set rmi mode\n"); + goto exit; + } + + ret = rmi_set_page(hdev, 0); + if (ret < 0) { + dev_err(&hdev->dev, "failed to set page select to 0.\n"); + goto exit; + } + + ret = rmi_populate(hdev); + if (ret) + goto exit; + + hid_info(hdev, "firmware id: %ld\n", data->firmware_id); + + __set_bit(EV_ABS, input->evbit); + input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0); + + if (data->x_size_mm && data->y_size_mm) { + res_x = (data->max_x - 1) / data->x_size_mm; + res_y = (data->max_y - 1) / data->y_size_mm; + + input_abs_set_res(input, ABS_MT_POSITION_X, res_x); + input_abs_set_res(input, ABS_MT_POSITION_Y, res_y); + } + + input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); + + input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER); + + if (data->button_count) { + __set_bit(EV_KEY, input->evbit); + for (i = 0; i < data->button_count; i++) + __set_bit(BTN_LEFT + i, input->keybit); + + if (data->button_count == 1) + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + } + + set_bit(RMI_STARTED, &data->flags); + +exit: + hid_device_io_stop(hdev); + hid_hw_close(hdev); +} + +static int rmi_input_mapping(struct hid_device *hdev, + struct hid_input *hi, struct hid_field *field, + struct hid_usage *usage, unsigned long **bit, int *max) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + + /* + * we want to make HID ignore the advertised HID collection + * for RMI deivces + */ + if (data->device_flags & RMI_DEVICE) { + if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) && + ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)) + return 0; + + return -1; + } + + return 0; +} + +static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, + unsigned id, struct hid_report **report) +{ + int i; + + *report = hdev->report_enum[type].report_id_hash[id]; + if (*report) { + for (i = 0; i < (*report)->maxfield; i++) { + unsigned app = (*report)->field[i]->application; + if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR) + return 1; + } + } + + return 0; +} + +static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct rmi_data *data = NULL; + int ret; + size_t alloc_size; + struct hid_report *input_report; + struct hid_report *output_report; + struct hid_report *feature_report; + + data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + INIT_WORK(&data->reset_work, rmi_reset_work); + data->hdev = hdev; + + hid_set_drvdata(hdev, data); + + hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS; + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "parse failed\n"); + return ret; + } + + if (id->driver_data) + data->device_flags = id->driver_data; + + /* + * Check for the RMI specific report ids. If they are misisng + * simply return and let the events be processed by hid-input + */ + if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT, + RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) { + hid_dbg(hdev, "device does not have set mode feature report\n"); + goto start; + } + + if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT, + RMI_ATTN_REPORT_ID, &input_report)) { + hid_dbg(hdev, "device does not have attention input report\n"); + goto start; + } + + data->input_report_size = hid_report_len(input_report); + + if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT, + RMI_WRITE_REPORT_ID, &output_report)) { + hid_dbg(hdev, + "device does not have rmi write output report\n"); + goto start; + } + + data->output_report_size = hid_report_len(output_report); + + data->device_flags |= RMI_DEVICE; + alloc_size = data->output_report_size + data->input_report_size; + + data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); + if (!data->writeReport) { + ret = -ENOMEM; + return ret; + } + + data->readReport = data->writeReport + data->output_report_size; + + init_waitqueue_head(&data->wait); + + mutex_init(&data->page_mutex); + +start: + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + hid_err(hdev, "hw start failed\n"); + return ret; + } + + if ((data->device_flags & RMI_DEVICE) && + !test_bit(RMI_STARTED, &data->flags)) + /* + * The device maybe in the bootloader if rmi_input_configured + * failed to find F11 in the PDT. Print an error, but don't + * return an error from rmi_probe so that hidraw will be + * accessible from userspace. That way a userspace tool + * can be used to reload working firmware on the touchpad. + */ + hid_err(hdev, "Device failed to be properly configured\n"); + + return 0; +} + +static void rmi_remove(struct hid_device *hdev) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + + clear_bit(RMI_STARTED, &hdata->flags); + + hid_hw_stop(hdev); +} + +static const struct hid_device_id rmi_id[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14), + .driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS }, + { HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(hid, rmi_id); + +static struct hid_driver rmi_driver = { + .name = "hid-rmi", + .id_table = rmi_id, + .probe = rmi_probe, + .remove = rmi_remove, + .event = rmi_event, + .raw_event = rmi_raw_event, + .input_mapping = rmi_input_mapping, + .input_configured = rmi_input_configured, +#ifdef CONFIG_PM + .resume = rmi_post_resume, + .reset_resume = rmi_post_reset, +#endif +}; + +module_hid_driver(rmi_driver); + +MODULE_AUTHOR("Andrew Duggan "); +MODULE_DESCRIPTION("RMI HID driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-54-g00ecf