From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/hwmon/ltc4215.c | 280 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 280 insertions(+) create mode 100644 drivers/hwmon/ltc4215.c (limited to 'drivers/hwmon/ltc4215.c') diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c new file mode 100644 index 000000000..c8a9bd9b0 --- /dev/null +++ b/drivers/hwmon/ltc4215.c @@ -0,0 +1,280 @@ +/* + * Driver for Linear Technology LTC4215 I2C Hot Swap Controller + * + * Copyright (C) 2009 Ira W. Snyder + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * Datasheet: + * http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Here are names of the chip's registers (a.k.a. commands) */ +enum ltc4215_cmd { + LTC4215_CONTROL = 0x00, /* rw */ + LTC4215_ALERT = 0x01, /* rw */ + LTC4215_STATUS = 0x02, /* ro */ + LTC4215_FAULT = 0x03, /* rw */ + LTC4215_SENSE = 0x04, /* rw */ + LTC4215_SOURCE = 0x05, /* rw */ + LTC4215_ADIN = 0x06, /* rw */ +}; + +struct ltc4215_data { + struct i2c_client *client; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* Registers */ + u8 regs[7]; +}; + +static struct ltc4215_data *ltc4215_update_device(struct device *dev) +{ + struct ltc4215_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + s32 val; + int i; + + mutex_lock(&data->update_lock); + + /* The chip's A/D updates 10 times per second */ + if (time_after(jiffies, data->last_updated + HZ / 10) || !data->valid) { + + dev_dbg(&client->dev, "Starting ltc4215 update\n"); + + /* Read all registers */ + for (i = 0; i < ARRAY_SIZE(data->regs); i++) { + val = i2c_smbus_read_byte_data(client, i); + if (unlikely(val < 0)) + data->regs[i] = 0; + else + data->regs[i] = val; + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +/* Return the voltage from the given register in millivolts */ +static int ltc4215_get_voltage(struct device *dev, u8 reg) +{ + struct ltc4215_data *data = ltc4215_update_device(dev); + const u8 regval = data->regs[reg]; + u32 voltage = 0; + + switch (reg) { + case LTC4215_SENSE: + /* 151 uV per increment */ + voltage = regval * 151 / 1000; + break; + case LTC4215_SOURCE: + /* 60.5 mV per increment */ + voltage = regval * 605 / 10; + break; + case LTC4215_ADIN: + /* + * The ADIN input is divided by 12.5, and has 4.82 mV + * per increment, so we have the additional multiply + */ + voltage = regval * 482 * 125 / 1000; + break; + default: + /* If we get here, the developer messed up */ + WARN_ON_ONCE(1); + break; + } + + return voltage; +} + +/* Return the current from the sense resistor in mA */ +static unsigned int ltc4215_get_current(struct device *dev) +{ + struct ltc4215_data *data = ltc4215_update_device(dev); + + /* + * The strange looking conversions that follow are fixed-point + * math, since we cannot do floating point in the kernel. + * + * Step 1: convert sense register to microVolts + * Step 2: convert voltage to milliAmperes + * + * If you play around with the V=IR equation, you come up with + * the following: X uV / Y mOhm == Z mA + * + * With the resistors that are fractions of a milliOhm, we multiply + * the voltage and resistance by 10, to shift the decimal point. + * Now we can use the normal division operator again. + */ + + /* Calculate voltage in microVolts (151 uV per increment) */ + const unsigned int voltage = data->regs[LTC4215_SENSE] * 151; + + /* Calculate current in milliAmperes (4 milliOhm sense resistor) */ + const unsigned int curr = voltage / 4; + + return curr; +} + +static ssize_t ltc4215_show_voltage(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + const int voltage = ltc4215_get_voltage(dev, attr->index); + + return snprintf(buf, PAGE_SIZE, "%d\n", voltage); +} + +static ssize_t ltc4215_show_current(struct device *dev, + struct device_attribute *da, + char *buf) +{ + const unsigned int curr = ltc4215_get_current(dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", curr); +} + +static ssize_t ltc4215_show_power(struct device *dev, + struct device_attribute *da, + char *buf) +{ + const unsigned int curr = ltc4215_get_current(dev); + const int output_voltage = ltc4215_get_voltage(dev, LTC4215_ADIN); + + /* current in mA * voltage in mV == power in uW */ + const unsigned int power = abs(output_voltage * curr); + + return snprintf(buf, PAGE_SIZE, "%u\n", power); +} + +static ssize_t ltc4215_show_alarm(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ltc4215_data *data = ltc4215_update_device(dev); + const u8 reg = data->regs[LTC4215_STATUS]; + const u32 mask = attr->index; + + return snprintf(buf, PAGE_SIZE, "%u\n", !!(reg & mask)); +} + +/* + * These macros are used below in constructing device attribute objects + * for use with sysfs_create_group() to make a sysfs device file + * for each register. + */ + +/* Construct a sensor_device_attribute structure for each register */ + +/* Current */ +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4215_show_current, NULL, 0); +static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc4215_show_alarm, NULL, + 1 << 2); + +/* Power (virtual) */ +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ltc4215_show_power, NULL, 0); + +/* Input Voltage */ +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4215_show_voltage, NULL, + LTC4215_ADIN); +static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc4215_show_alarm, NULL, + 1 << 0); +static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc4215_show_alarm, NULL, + 1 << 1); + +/* Output Voltage */ +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4215_show_voltage, NULL, + LTC4215_SOURCE); +static SENSOR_DEVICE_ATTR(in2_min_alarm, S_IRUGO, ltc4215_show_alarm, NULL, + 1 << 3); + +/* + * Finally, construct an array of pointers to members of the above objects, + * as required for sysfs_create_group() + */ +static struct attribute *ltc4215_attrs[] = { + &sensor_dev_attr_curr1_input.dev_attr.attr, + &sensor_dev_attr_curr1_max_alarm.dev_attr.attr, + + &sensor_dev_attr_power1_input.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_max_alarm.dev_attr.attr, + &sensor_dev_attr_in1_min_alarm.dev_attr.attr, + + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min_alarm.dev_attr.attr, + + NULL, +}; +ATTRIBUTE_GROUPS(ltc4215); + +static int ltc4215_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct device *dev = &client->dev; + struct ltc4215_data *data; + struct device *hwmon_dev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->update_lock); + + /* Initialize the LTC4215 chip */ + i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00); + + hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, + data, + ltc4215_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id ltc4215_id[] = { + { "ltc4215", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ltc4215_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver ltc4215_driver = { + .driver = { + .name = "ltc4215", + }, + .probe = ltc4215_probe, + .id_table = ltc4215_id, +}; + +module_i2c_driver(ltc4215_driver); + +MODULE_AUTHOR("Ira W. Snyder "); +MODULE_DESCRIPTION("LTC4215 driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-54-g00ecf