From 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 15 Dec 2015 14:52:16 -0300 Subject: Linux-libre 4.3.2-gnu --- drivers/hwmon/pmbus/Kconfig | 20 +- drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/adm1275.c | 358 +++++++++++++++++++++-------- drivers/hwmon/pmbus/lm25066.c | 7 +- drivers/hwmon/pmbus/ltc2978.c | 482 +++++++++++++++++++++++++++++---------- drivers/hwmon/pmbus/max20751.c | 64 ++++++ drivers/hwmon/pmbus/max34440.c | 9 +- drivers/hwmon/pmbus/max8688.c | 19 +- drivers/hwmon/pmbus/pmbus.c | 5 + drivers/hwmon/pmbus/pmbus.h | 448 ++++++++++++++++++------------------ drivers/hwmon/pmbus/pmbus_core.c | 31 ++- drivers/hwmon/pmbus/zl6100.c | 11 +- 12 files changed, 989 insertions(+), 466 deletions(-) create mode 100644 drivers/hwmon/pmbus/max20751.c (limited to 'drivers/hwmon/pmbus') diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 9f7dbd189..df6ebb2b8 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -20,7 +20,8 @@ config SENSORS_PMBUS help If you say yes here you get hardware monitoring support for generic PMBus devices, including but not limited to ADP4000, BMR453, BMR454, - MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, and TPS40400. + MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20, + TPS544B25, TPS544C20, TPS544C25, and UDT020. This driver can also be built as a module. If so, the module will be called pmbus. @@ -30,8 +31,8 @@ config SENSORS_ADM1275 default n help If you say yes here you get hardware monitoring support for Analog - Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital - Power Monitors. + Devices ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 Hot-Swap + Controller and Digital Power Monitors. This driver can also be built as a module. If so, the module will be called adm1275. @@ -51,7 +52,8 @@ config SENSORS_LTC2978 default n help If you say yes here you get hardware monitoring support for Linear - Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676. + Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880, + LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676. This driver can also be built as a module. If so, the module will be called ltc2978. @@ -73,6 +75,16 @@ config SENSORS_MAX16064 This driver can also be built as a module. If so, the module will be called max16064. +config SENSORS_MAX20751 + tristate "Maxim MAX20751" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX20751. + + This driver can also be built as a module. If so, the module will + be called max20751. + config SENSORS_MAX34440 tristate "Maxim MAX34440 and compatibles" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 1454293e9..bce046d37 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o obj-$(CONFIG_SENSORS_LM25066) += lm25066.o obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o +obj-$(CONFIG_SENSORS_MAX20751) += max20751.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 60aad9570..188af4c89 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -21,46 +21,120 @@ #include #include #include +#include #include "pmbus.h" -enum chips { adm1075, adm1275, adm1276 }; +enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 }; + +#define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0) +#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5) +#define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6) #define ADM1275_PEAK_IOUT 0xd0 #define ADM1275_PEAK_VIN 0xd1 #define ADM1275_PEAK_VOUT 0xd2 #define ADM1275_PMON_CONFIG 0xd4 -#define ADM1275_VIN_VOUT_SELECT (1 << 6) -#define ADM1275_VRANGE (1 << 5) -#define ADM1075_IRANGE_50 (1 << 4) -#define ADM1075_IRANGE_25 (1 << 3) -#define ADM1075_IRANGE_MASK ((1 << 3) | (1 << 4)) +#define ADM1275_VIN_VOUT_SELECT BIT(6) +#define ADM1275_VRANGE BIT(5) +#define ADM1075_IRANGE_50 BIT(4) +#define ADM1075_IRANGE_25 BIT(3) +#define ADM1075_IRANGE_MASK (BIT(3) | BIT(4)) + +#define ADM1293_IRANGE_25 0 +#define ADM1293_IRANGE_50 BIT(6) +#define ADM1293_IRANGE_100 BIT(7) +#define ADM1293_IRANGE_200 (BIT(6) | BIT(7)) +#define ADM1293_IRANGE_MASK (BIT(6) | BIT(7)) + +#define ADM1293_VIN_SEL_012 BIT(2) +#define ADM1293_VIN_SEL_074 BIT(3) +#define ADM1293_VIN_SEL_210 (BIT(2) | BIT(3)) +#define ADM1293_VIN_SEL_MASK (BIT(2) | BIT(3)) + +#define ADM1293_VAUX_EN BIT(1) #define ADM1275_IOUT_WARN2_LIMIT 0xd7 #define ADM1275_DEVICE_CONFIG 0xd8 -#define ADM1275_IOUT_WARN2_SELECT (1 << 4) +#define ADM1275_IOUT_WARN2_SELECT BIT(4) #define ADM1276_PEAK_PIN 0xda - -#define ADM1275_MFR_STATUS_IOUT_WARN2 (1 << 0) - #define ADM1075_READ_VAUX 0xdd #define ADM1075_VAUX_OV_WARN_LIMIT 0xde #define ADM1075_VAUX_UV_WARN_LIMIT 0xdf +#define ADM1293_IOUT_MIN 0xe3 +#define ADM1293_PIN_MIN 0xe4 #define ADM1075_VAUX_STATUS 0xf6 -#define ADM1075_VAUX_OV_WARN (1<<7) -#define ADM1075_VAUX_UV_WARN (1<<6) +#define ADM1075_VAUX_OV_WARN BIT(7) +#define ADM1075_VAUX_UV_WARN BIT(6) struct adm1275_data { int id; bool have_oc_fault; + bool have_uc_fault; + bool have_vout; + bool have_vaux_status; + bool have_mfr_vaux_status; + bool have_iout_min; + bool have_pin_min; + bool have_pin_max; struct pmbus_driver_info info; }; #define to_adm1275_data(x) container_of(x, struct adm1275_data, info) +struct coefficients { + s16 m; + s16 b; + s16 R; +}; + +static const struct coefficients adm1075_coefficients[] = { + [0] = { 27169, 0, -1 }, /* voltage */ + [1] = { 806, 20475, -1 }, /* current, irange25 */ + [2] = { 404, 20475, -1 }, /* current, irange50 */ + [3] = { 0, -1, 8549 }, /* power, irange25 */ + [4] = { 0, -1, 4279 }, /* power, irange50 */ +}; + +static const struct coefficients adm1275_coefficients[] = { + [0] = { 19199, 0, -2 }, /* voltage, vrange set */ + [1] = { 6720, 0, -1 }, /* voltage, vrange not set */ + [2] = { 807, 20475, -1 }, /* current */ +}; + +static const struct coefficients adm1276_coefficients[] = { + [0] = { 19199, 0, -2 }, /* voltage, vrange set */ + [1] = { 6720, 0, -1 }, /* voltage, vrange not set */ + [2] = { 807, 20475, -1 }, /* current */ + [3] = { 6043, 0, -2 }, /* power, vrange set */ + [4] = { 2115, 0, -1 }, /* power, vrange not set */ +}; + +static const struct coefficients adm1293_coefficients[] = { + [0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */ + [1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */ + [2] = { 19604, -50, -2 }, /* voltage, vrange 21V */ + [3] = { 8000, -100, -2 }, /* current, irange25 */ + [4] = { 4000, -100, -2 }, /* current, irange50 */ + [5] = { 20000, -1000, -3 }, /* current, irange100 */ + [6] = { 10000, -1000, -3 }, /* current, irange200 */ + [7] = { 10417, 0, -1 }, /* power, 1.2V, irange25 */ + [8] = { 5208, 0, -1 }, /* power, 1.2V, irange50 */ + [9] = { 26042, 0, -2 }, /* power, 1.2V, irange100 */ + [10] = { 13021, 0, -2 }, /* power, 1.2V, irange200 */ + [11] = { 17351, 0, -2 }, /* power, 7.4V, irange25 */ + [12] = { 8676, 0, -2 }, /* power, 7.4V, irange50 */ + [13] = { 4338, 0, -2 }, /* power, 7.4V, irange100 */ + [14] = { 21689, 0, -3 }, /* power, 7.4V, irange200 */ + [15] = { 6126, 0, -2 }, /* power, 21V, irange25 */ + [16] = { 30631, 0, -3 }, /* power, 21V, irange50 */ + [17] = { 15316, 0, -3 }, /* power, 21V, irange100 */ + [18] = { 7658, 0, -3 }, /* power, 21V, irange200 */ +}; + static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); @@ -72,42 +146,37 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) switch (reg) { case PMBUS_IOUT_UC_FAULT_LIMIT: - if (data->have_oc_fault) { - ret = -ENXIO; - break; - } + if (!data->have_uc_fault) + return -ENXIO; ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT); break; case PMBUS_IOUT_OC_FAULT_LIMIT: - if (!data->have_oc_fault) { - ret = -ENXIO; - break; - } + if (!data->have_oc_fault) + return -ENXIO; ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT); break; case PMBUS_VOUT_OV_WARN_LIMIT: - if (data->id != adm1075) { - ret = -ENODATA; - break; - } + if (data->have_vout) + return -ENODATA; ret = pmbus_read_word_data(client, 0, ADM1075_VAUX_OV_WARN_LIMIT); break; case PMBUS_VOUT_UV_WARN_LIMIT: - if (data->id != adm1075) { - ret = -ENODATA; - break; - } + if (data->have_vout) + return -ENODATA; ret = pmbus_read_word_data(client, 0, ADM1075_VAUX_UV_WARN_LIMIT); break; case PMBUS_READ_VOUT: - if (data->id != adm1075) { - ret = -ENODATA; - break; - } + if (data->have_vout) + return -ENODATA; ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX); break; + case PMBUS_VIRT_READ_IOUT_MIN: + if (!data->have_iout_min) + return -ENXIO; + ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN); + break; case PMBUS_VIRT_READ_IOUT_MAX: ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT); break; @@ -117,11 +186,14 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) case PMBUS_VIRT_READ_VIN_MAX: ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN); break; + case PMBUS_VIRT_READ_PIN_MIN: + if (!data->have_pin_min) + return -ENXIO; + ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN); + break; case PMBUS_VIRT_READ_PIN_MAX: - if (data->id == adm1275) { - ret = -ENXIO; - break; - } + if (!data->have_pin_max) + return -ENXIO; ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN); break; case PMBUS_VIRT_RESET_IOUT_HISTORY: @@ -129,8 +201,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) case PMBUS_VIRT_RESET_VIN_HISTORY: break; case PMBUS_VIRT_RESET_PIN_HISTORY: - if (data->id == adm1275) - ret = -ENXIO; + if (!data->have_pin_max) + return -ENXIO; break; default: ret = -ENODATA; @@ -142,6 +214,8 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, u16 word) { + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + const struct adm1275_data *data = to_adm1275_data(info); int ret; if (page) @@ -155,6 +229,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, break; case PMBUS_VIRT_RESET_IOUT_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0); + if (!ret && data->have_iout_min) + ret = pmbus_write_word_data(client, 0, + ADM1293_IOUT_MIN, 0); break; case PMBUS_VIRT_RESET_VOUT_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0); @@ -164,6 +241,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, break; case PMBUS_VIRT_RESET_PIN_HISTORY: ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0); + if (!ret && data->have_pin_min) + ret = pmbus_write_word_data(client, 0, + ADM1293_PIN_MIN, 0); break; default: ret = -ENODATA; @@ -186,29 +266,40 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg) ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT); if (ret < 0) break; + if (!data->have_oc_fault && !data->have_uc_fault) + break; mfr_status = pmbus_read_byte_data(client, page, PMBUS_STATUS_MFR_SPECIFIC); - if (mfr_status < 0) { - ret = mfr_status; - break; - } + if (mfr_status < 0) + return mfr_status; if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) { ret |= data->have_oc_fault ? PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT; } break; case PMBUS_STATUS_VOUT: - if (data->id != adm1075) { - ret = -ENODATA; - break; - } + if (data->have_vout) + return -ENODATA; ret = 0; - mfr_status = pmbus_read_byte_data(client, 0, - ADM1075_VAUX_STATUS); - if (mfr_status & ADM1075_VAUX_OV_WARN) - ret |= PB_VOLTAGE_OV_WARNING; - if (mfr_status & ADM1075_VAUX_UV_WARN) - ret |= PB_VOLTAGE_UV_WARNING; + if (data->have_vaux_status) { + mfr_status = pmbus_read_byte_data(client, 0, + ADM1075_VAUX_STATUS); + if (mfr_status < 0) + return mfr_status; + if (mfr_status & ADM1075_VAUX_OV_WARN) + ret |= PB_VOLTAGE_OV_WARNING; + if (mfr_status & ADM1075_VAUX_UV_WARN) + ret |= PB_VOLTAGE_UV_WARNING; + } else if (data->have_mfr_vaux_status) { + mfr_status = pmbus_read_byte_data(client, page, + PMBUS_STATUS_MFR_SPECIFIC); + if (mfr_status < 0) + return mfr_status; + if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN) + ret |= PB_VOLTAGE_OV_WARNING; + if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN) + ret |= PB_VOLTAGE_UV_WARNING; + } break; default: ret = -ENODATA; @@ -221,6 +312,8 @@ static const struct i2c_device_id adm1275_id[] = { { "adm1075", adm1075 }, { "adm1275", adm1275 }, { "adm1276", adm1276 }, + { "adm1293", adm1293 }, + { "adm1294", adm1294 }, { } }; MODULE_DEVICE_TABLE(i2c, adm1275_id); @@ -234,6 +327,8 @@ static int adm1275_probe(struct i2c_client *client, struct pmbus_driver_info *info; struct adm1275_data *data; const struct i2c_device_id *mid; + const struct coefficients *coefficients; + int vindex = -1, voindex = -1, cindex = -1, pindex = -1; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA @@ -290,61 +385,38 @@ static int adm1275_probe(struct i2c_client *client, info->format[PSC_VOLTAGE_IN] = direct; info->format[PSC_VOLTAGE_OUT] = direct; info->format[PSC_CURRENT_OUT] = direct; - info->m[PSC_CURRENT_OUT] = 807; - info->b[PSC_CURRENT_OUT] = 20475; - info->R[PSC_CURRENT_OUT] = -1; + info->format[PSC_POWER] = direct; info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; info->read_word_data = adm1275_read_word_data; info->read_byte_data = adm1275_read_byte_data; info->write_word_data = adm1275_write_word_data; - if (data->id == adm1075) { - info->m[PSC_VOLTAGE_IN] = 27169; - info->b[PSC_VOLTAGE_IN] = 0; - info->R[PSC_VOLTAGE_IN] = -1; - info->m[PSC_VOLTAGE_OUT] = 27169; - info->b[PSC_VOLTAGE_OUT] = 0; - info->R[PSC_VOLTAGE_OUT] = -1; - } else if (config & ADM1275_VRANGE) { - info->m[PSC_VOLTAGE_IN] = 19199; - info->b[PSC_VOLTAGE_IN] = 0; - info->R[PSC_VOLTAGE_IN] = -2; - info->m[PSC_VOLTAGE_OUT] = 19199; - info->b[PSC_VOLTAGE_OUT] = 0; - info->R[PSC_VOLTAGE_OUT] = -2; - } else { - info->m[PSC_VOLTAGE_IN] = 6720; - info->b[PSC_VOLTAGE_IN] = 0; - info->R[PSC_VOLTAGE_IN] = -1; - info->m[PSC_VOLTAGE_OUT] = 6720; - info->b[PSC_VOLTAGE_OUT] = 0; - info->R[PSC_VOLTAGE_OUT] = -1; - } - - if (device_config & ADM1275_IOUT_WARN2_SELECT) - data->have_oc_fault = true; - switch (data->id) { case adm1075: - info->format[PSC_POWER] = direct; - info->b[PSC_POWER] = 0; - info->R[PSC_POWER] = -1; + if (device_config & ADM1275_IOUT_WARN2_SELECT) + data->have_oc_fault = true; + else + data->have_uc_fault = true; + data->have_pin_max = true; + data->have_vaux_status = true; + + coefficients = adm1075_coefficients; + vindex = 0; switch (config & ADM1075_IRANGE_MASK) { case ADM1075_IRANGE_25: - info->m[PSC_POWER] = 8549; - info->m[PSC_CURRENT_OUT] = 806; + cindex = 1; + pindex = 3; break; case ADM1075_IRANGE_50: - info->m[PSC_POWER] = 4279; - info->m[PSC_CURRENT_OUT] = 404; + cindex = 2; + pindex = 4; break; default: dev_err(&client->dev, "Invalid input current range"); - info->m[PSC_POWER] = 0; - info->m[PSC_CURRENT_OUT] = 0; break; } + info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT; if (config & ADM1275_VIN_VOUT_SELECT) @@ -352,6 +424,16 @@ static int adm1275_probe(struct i2c_client *client, PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; break; case adm1275: + if (device_config & ADM1275_IOUT_WARN2_SELECT) + data->have_oc_fault = true; + else + data->have_uc_fault = true; + data->have_vout = true; + + coefficients = adm1275_coefficients; + vindex = (config & ADM1275_VRANGE) ? 0 : 1; + cindex = 2; + if (config & ADM1275_VIN_VOUT_SELECT) info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; @@ -360,22 +442,100 @@ static int adm1275_probe(struct i2c_client *client, PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; break; case adm1276: - info->format[PSC_POWER] = direct; + if (device_config & ADM1275_IOUT_WARN2_SELECT) + data->have_oc_fault = true; + else + data->have_uc_fault = true; + data->have_vout = true; + data->have_pin_max = true; + + coefficients = adm1276_coefficients; + vindex = (config & ADM1275_VRANGE) ? 0 : 1; + cindex = 2; + pindex = (config & ADM1275_VRANGE) ? 3 : 4; + info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT; if (config & ADM1275_VIN_VOUT_SELECT) info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; - if (config & ADM1275_VRANGE) { - info->m[PSC_POWER] = 6043; - info->b[PSC_POWER] = 0; - info->R[PSC_POWER] = -2; - } else { - info->m[PSC_POWER] = 2115; - info->b[PSC_POWER] = 0; - info->R[PSC_POWER] = -1; + break; + case adm1293: + case adm1294: + data->have_iout_min = true; + data->have_pin_min = true; + data->have_pin_max = true; + data->have_mfr_vaux_status = true; + + coefficients = adm1293_coefficients; + + voindex = 0; + switch (config & ADM1293_VIN_SEL_MASK) { + case ADM1293_VIN_SEL_012: /* 1.2V */ + vindex = 0; + break; + case ADM1293_VIN_SEL_074: /* 7.4V */ + vindex = 1; + break; + case ADM1293_VIN_SEL_210: /* 21V */ + vindex = 2; + break; + default: /* disabled */ + break; } + + switch (config & ADM1293_IRANGE_MASK) { + case ADM1293_IRANGE_25: + cindex = 3; + break; + case ADM1293_IRANGE_50: + cindex = 4; + break; + case ADM1293_IRANGE_100: + cindex = 5; + break; + case ADM1293_IRANGE_200: + cindex = 6; + break; + } + + if (vindex >= 0) + pindex = 7 + vindex * 4 + (cindex - 3); + + if (config & ADM1293_VAUX_EN) + info->func[0] |= + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + + info->func[0] |= PMBUS_HAVE_PIN | + PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; + break; + default: + dev_err(&client->dev, "Unsupported device\n"); + return -ENODEV; + } + + if (voindex < 0) + voindex = vindex; + if (vindex >= 0) { + info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m; + info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b; + info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R; + } + if (voindex >= 0) { + info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m; + info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b; + info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R; + } + if (cindex >= 0) { + info->m[PSC_CURRENT_OUT] = coefficients[cindex].m; + info->b[PSC_CURRENT_OUT] = coefficients[cindex].b; + info->R[PSC_CURRENT_OUT] = coefficients[cindex].R; + } + if (pindex >= 0) { + info->m[PSC_POWER] = coefficients[pindex].m; + info->b[PSC_POWER] = coefficients[pindex].b; + info->R[PSC_POWER] = coefficients[pindex].R; } return pmbus_do_probe(client, id, info); diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c index a26b1d1d9..a3d912cd3 100644 --- a/drivers/hwmon/pmbus/lm25066.c +++ b/drivers/hwmon/pmbus/lm25066.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -42,15 +43,15 @@ enum chips { lm25056, lm25063, lm25066, lm5064, lm5066 }; #define LM25066_READ_AVG_IIN 0xde #define LM25066_READ_AVG_PIN 0xdf -#define LM25066_DEV_SETUP_CL (1 << 4) /* Current limit */ +#define LM25066_DEV_SETUP_CL BIT(4) /* Current limit */ /* LM25056 only */ #define LM25056_VAUX_OV_WARN_LIMIT 0xe3 #define LM25056_VAUX_UV_WARN_LIMIT 0xe4 -#define LM25056_MFR_STS_VAUX_OV_WARN (1 << 1) -#define LM25056_MFR_STS_VAUX_UV_WARN (1 << 0) +#define LM25056_MFR_STS_VAUX_OV_WARN BIT(1) +#define LM25056_MFR_STS_VAUX_UV_WARN BIT(0) /* LM25063 only */ diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c index 0835050ec..58b789c28 100644 --- a/drivers/hwmon/pmbus/ltc2978.c +++ b/drivers/hwmon/pmbus/ltc2978.c @@ -1,9 +1,9 @@ /* - * Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880, - * LTC3883, and LTM4676 + * Hardware monitoring driver for LTC2978 and compatible chips. * * Copyright (c) 2011 Ericsson AB. - * Copyright (c) 2013, 2014 Guenter Roeck + * Copyright (c) 2013, 2014, 2015 Guenter Roeck + * Copyright (c) 2015 Linear Technology * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,6 +16,8 @@ * GNU General Public License for more details. */ +#include +#include #include #include #include @@ -25,49 +27,71 @@ #include #include "pmbus.h" -enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 }; +enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882, + ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 }; /* Common for all chips */ #define LTC2978_MFR_VOUT_PEAK 0xdd #define LTC2978_MFR_VIN_PEAK 0xde #define LTC2978_MFR_TEMPERATURE_PEAK 0xdf -#define LTC2978_MFR_SPECIAL_ID 0xe7 +#define LTC2978_MFR_SPECIAL_ID 0xe7 /* Undocumented on LTC3882 */ +#define LTC2978_MFR_COMMON 0xef -/* LTC2974, LCT2977, and LTC2978 */ +/* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */ #define LTC2978_MFR_VOUT_MIN 0xfb #define LTC2978_MFR_VIN_MIN 0xfc #define LTC2978_MFR_TEMPERATURE_MIN 0xfd -/* LTC2974 only */ +/* LTC2974, LTC2975 */ #define LTC2974_MFR_IOUT_PEAK 0xd7 #define LTC2974_MFR_IOUT_MIN 0xd8 -/* LTC3880, LTC3883, and LTM4676 */ +/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */ #define LTC3880_MFR_IOUT_PEAK 0xd7 #define LTC3880_MFR_CLEAR_PEAKS 0xe3 #define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4 -/* LTC3883 only */ +/* LTC3883 and LTC3886 only */ #define LTC3883_MFR_IIN_PEAK 0xe1 -#define LTC2974_ID_REV1 0x0212 -#define LTC2974_ID_REV2 0x0213 +/* LTC2975 only */ +#define LTC2975_MFR_IIN_PEAK 0xc4 +#define LTC2975_MFR_IIN_MIN 0xc5 +#define LTC2975_MFR_PIN_PEAK 0xc6 +#define LTC2975_MFR_PIN_MIN 0xc7 + +#define LTC2978_ID_MASK 0xfff0 + +#define LTC2974_ID 0x0210 +#define LTC2975_ID 0x0220 #define LTC2977_ID 0x0130 -#define LTC2978_ID_REV1 0x0121 -#define LTC2978_ID_REV2 0x0122 -#define LTC2978A_ID 0x0124 -#define LTC3880_ID 0x4000 -#define LTC3880_ID_MASK 0xff00 +#define LTC2978_ID_REV1 0x0110 /* Early revision */ +#define LTC2978_ID_REV2 0x0120 +#define LTC2980_ID_A 0x8030 /* A/B for two die IDs */ +#define LTC2980_ID_B 0x8040 +#define LTC3880_ID 0x4020 +#define LTC3882_ID 0x4200 +#define LTC3882_ID_D1 0x4240 /* Dash 1 */ #define LTC3883_ID 0x4300 -#define LTC3883_ID_MASK 0xff00 -#define LTM4676_ID 0x4480 /* datasheet claims 0x440X */ -#define LTM4676_ID_MASK 0xfff0 +#define LTC3886_ID 0x4600 +#define LTC3887_ID 0x4700 +#define LTM2987_ID_A 0x8010 /* A/B for two die IDs */ +#define LTM2987_ID_B 0x8020 +#define LTM4675_ID 0x47a0 +#define LTM4676_ID_REV1 0x4400 +#define LTM4676_ID_REV2 0x4480 +#define LTM4676A_ID 0x47e0 #define LTC2974_NUM_PAGES 4 #define LTC2978_NUM_PAGES 8 #define LTC3880_NUM_PAGES 2 #define LTC3883_NUM_PAGES 1 +#define LTC_POLL_TIMEOUT 100 /* in milli-seconds */ + +#define LTC_NOT_BUSY BIT(5) +#define LTC_NOT_PENDING BIT(4) + /* * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which * happens pretty much each time chip data is updated. Raw peak data therefore @@ -82,13 +106,91 @@ struct ltc2978_data { u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES]; u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES]; u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES]; - u16 iin_max; + u16 iin_min, iin_max; + u16 pin_min, pin_max; u16 temp2_max; struct pmbus_driver_info info; + u32 features; }; - #define to_ltc2978_data(x) container_of(x, struct ltc2978_data, info) +#define FEAT_CLEAR_PEAKS BIT(0) +#define FEAT_NEEDS_POLLING BIT(1) + +#define has_clear_peaks(d) ((d)->features & FEAT_CLEAR_PEAKS) +#define needs_polling(d) ((d)->features & FEAT_NEEDS_POLLING) + +static int ltc_wait_ready(struct i2c_client *client) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT); + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct ltc2978_data *data = to_ltc2978_data(info); + int status; + u8 mask; + + if (!needs_polling(data)) + return 0; + + /* + * LTC3883 does not support LTC_NOT_PENDING, even though + * the datasheet claims that it does. + */ + mask = LTC_NOT_BUSY; + if (data->id != ltc3883) + mask |= LTC_NOT_PENDING; + + do { + status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON); + if (status == -EBADMSG || status == -ENXIO) { + /* PEC error or NACK: chip may be busy, try again */ + usleep_range(50, 100); + continue; + } + if (status < 0) + return status; + + if ((status & mask) == mask) + return 0; + + usleep_range(50, 100); + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static int ltc_read_word_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + ret = ltc_wait_ready(client); + if (ret < 0) + return ret; + + return pmbus_read_word_data(client, page, reg); +} + +static int ltc_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + ret = ltc_wait_ready(client); + if (ret < 0) + return ret; + + return pmbus_read_byte_data(client, page, reg); +} + +static int ltc_write_byte(struct i2c_client *client, int page, u8 byte) +{ + int ret; + + ret = ltc_wait_ready(client); + if (ret < 0) + return ret; + + return pmbus_write_byte(client, page, byte); +} + static inline int lin11_to_val(int data) { s16 e = ((s16)data) >> 11; @@ -102,6 +204,34 @@ static inline int lin11_to_val(int data) return (e < 0 ? m >> -e : m << e); } +static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client, + int page, int reg, u16 *pmax) +{ + int ret; + + ret = ltc_read_word_data(client, page, reg); + if (ret >= 0) { + if (lin11_to_val(ret) > lin11_to_val(*pmax)) + *pmax = ret; + ret = *pmax; + } + return ret; +} + +static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client, + int page, int reg, u16 *pmin) +{ + int ret; + + ret = ltc_read_word_data(client, page, reg); + if (ret >= 0) { + if (lin11_to_val(ret) < lin11_to_val(*pmin)) + *pmin = ret; + ret = *pmin; + } + return ret; +} + static int ltc2978_read_word_data_common(struct i2c_client *client, int page, int reg) { @@ -111,15 +241,11 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page, switch (reg) { case PMBUS_VIRT_READ_VIN_MAX: - ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_PEAK); - if (ret >= 0) { - if (lin11_to_val(ret) > lin11_to_val(data->vin_max)) - data->vin_max = ret; - ret = data->vin_max; - } + ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK, + &data->vin_max); break; case PMBUS_VIRT_READ_VOUT_MAX: - ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK); + ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_PEAK); if (ret >= 0) { /* * VOUT is 16 bit unsigned with fixed exponent, @@ -131,14 +257,9 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page, } break; case PMBUS_VIRT_READ_TEMP_MAX: - ret = pmbus_read_word_data(client, page, - LTC2978_MFR_TEMPERATURE_PEAK); - if (ret >= 0) { - if (lin11_to_val(ret) - > lin11_to_val(data->temp_max[page])) - data->temp_max[page] = ret; - ret = data->temp_max[page]; - } + ret = ltc_get_max(data, client, page, + LTC2978_MFR_TEMPERATURE_PEAK, + &data->temp_max[page]); break; case PMBUS_VIRT_RESET_VOUT_HISTORY: case PMBUS_VIRT_RESET_VIN_HISTORY: @@ -146,6 +267,9 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page, ret = 0; break; default: + ret = ltc_wait_ready(client); + if (ret < 0) + return ret; ret = -ENODATA; break; } @@ -160,15 +284,11 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg) switch (reg) { case PMBUS_VIRT_READ_VIN_MIN: - ret = pmbus_read_word_data(client, page, LTC2978_MFR_VIN_MIN); - if (ret >= 0) { - if (lin11_to_val(ret) < lin11_to_val(data->vin_min)) - data->vin_min = ret; - ret = data->vin_min; - } + ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN, + &data->vin_min); break; case PMBUS_VIRT_READ_VOUT_MIN: - ret = pmbus_read_word_data(client, page, LTC2978_MFR_VOUT_MIN); + ret = ltc_read_word_data(client, page, LTC2978_MFR_VOUT_MIN); if (ret >= 0) { /* * VOUT_MIN is known to not be supported on some lots @@ -184,14 +304,9 @@ static int ltc2978_read_word_data(struct i2c_client *client, int page, int reg) } break; case PMBUS_VIRT_READ_TEMP_MIN: - ret = pmbus_read_word_data(client, page, - LTC2978_MFR_TEMPERATURE_MIN); - if (ret >= 0) { - if (lin11_to_val(ret) - < lin11_to_val(data->temp_min[page])) - data->temp_min[page] = ret; - ret = data->temp_min[page]; - } + ret = ltc_get_min(data, client, page, + LTC2978_MFR_TEMPERATURE_MIN, + &data->temp_min[page]); break; case PMBUS_VIRT_READ_IOUT_MAX: case PMBUS_VIRT_RESET_IOUT_HISTORY: @@ -214,22 +329,12 @@ static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg) switch (reg) { case PMBUS_VIRT_READ_IOUT_MAX: - ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_PEAK); - if (ret >= 0) { - if (lin11_to_val(ret) - > lin11_to_val(data->iout_max[page])) - data->iout_max[page] = ret; - ret = data->iout_max[page]; - } + ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK, + &data->iout_max[page]); break; case PMBUS_VIRT_READ_IOUT_MIN: - ret = pmbus_read_word_data(client, page, LTC2974_MFR_IOUT_MIN); - if (ret >= 0) { - if (lin11_to_val(ret) - < lin11_to_val(data->iout_min[page])) - data->iout_min[page] = ret; - ret = data->iout_min[page]; - } + ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN, + &data->iout_min[page]); break; case PMBUS_VIRT_RESET_IOUT_HISTORY: ret = 0; @@ -241,6 +346,40 @@ static int ltc2974_read_word_data(struct i2c_client *client, int page, int reg) return ret; } +static int ltc2975_read_word_data(struct i2c_client *client, int page, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct ltc2978_data *data = to_ltc2978_data(info); + int ret; + + switch (reg) { + case PMBUS_VIRT_READ_IIN_MAX: + ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK, + &data->iin_max); + break; + case PMBUS_VIRT_READ_IIN_MIN: + ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN, + &data->iin_min); + break; + case PMBUS_VIRT_READ_PIN_MAX: + ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK, + &data->pin_max); + break; + case PMBUS_VIRT_READ_PIN_MIN: + ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN, + &data->pin_min); + break; + case PMBUS_VIRT_RESET_IIN_HISTORY: + case PMBUS_VIRT_RESET_PIN_HISTORY: + ret = 0; + break; + default: + ret = ltc2978_read_word_data(client, page, reg); + break; + } + return ret; +} + static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg) { const struct pmbus_driver_info *info = pmbus_get_driver_info(client); @@ -249,22 +388,13 @@ static int ltc3880_read_word_data(struct i2c_client *client, int page, int reg) switch (reg) { case PMBUS_VIRT_READ_IOUT_MAX: - ret = pmbus_read_word_data(client, page, LTC3880_MFR_IOUT_PEAK); - if (ret >= 0) { - if (lin11_to_val(ret) - > lin11_to_val(data->iout_max[page])) - data->iout_max[page] = ret; - ret = data->iout_max[page]; - } + ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK, + &data->iout_max[page]); break; case PMBUS_VIRT_READ_TEMP2_MAX: - ret = pmbus_read_word_data(client, page, - LTC3880_MFR_TEMPERATURE2_PEAK); - if (ret >= 0) { - if (lin11_to_val(ret) > lin11_to_val(data->temp2_max)) - data->temp2_max = ret; - ret = data->temp2_max; - } + ret = ltc_get_max(data, client, page, + LTC3880_MFR_TEMPERATURE2_PEAK, + &data->temp2_max); break; case PMBUS_VIRT_READ_VIN_MIN: case PMBUS_VIRT_READ_VOUT_MIN: @@ -290,13 +420,8 @@ static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg) switch (reg) { case PMBUS_VIRT_READ_IIN_MAX: - ret = pmbus_read_word_data(client, page, LTC3883_MFR_IIN_PEAK); - if (ret >= 0) { - if (lin11_to_val(ret) - > lin11_to_val(data->iin_max)) - data->iin_max = ret; - ret = data->iin_max; - } + ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK, + &data->iin_max); break; case PMBUS_VIRT_RESET_IIN_HISTORY: ret = 0; @@ -308,15 +433,15 @@ static int ltc3883_read_word_data(struct i2c_client *client, int page, int reg) return ret; } -static int ltc2978_clear_peaks(struct i2c_client *client, int page, - enum chips id) +static int ltc2978_clear_peaks(struct ltc2978_data *data, + struct i2c_client *client, int page) { int ret; - if (id == ltc3880 || id == ltc3883) - ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS); + if (has_clear_peaks(data)) + ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS); else - ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); + ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS); return ret; } @@ -331,33 +456,42 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, switch (reg) { case PMBUS_VIRT_RESET_IIN_HISTORY: data->iin_max = 0x7c00; - ret = ltc2978_clear_peaks(client, page, data->id); + data->iin_min = 0x7bff; + ret = ltc2978_clear_peaks(data, client, 0); + break; + case PMBUS_VIRT_RESET_PIN_HISTORY: + data->pin_max = 0x7c00; + data->pin_min = 0x7bff; + ret = ltc2978_clear_peaks(data, client, 0); break; case PMBUS_VIRT_RESET_IOUT_HISTORY: data->iout_max[page] = 0x7c00; data->iout_min[page] = 0xfbff; - ret = ltc2978_clear_peaks(client, page, data->id); + ret = ltc2978_clear_peaks(data, client, page); break; case PMBUS_VIRT_RESET_TEMP2_HISTORY: data->temp2_max = 0x7c00; - ret = ltc2978_clear_peaks(client, page, data->id); + ret = ltc2978_clear_peaks(data, client, page); break; case PMBUS_VIRT_RESET_VOUT_HISTORY: data->vout_min[page] = 0xffff; data->vout_max[page] = 0; - ret = ltc2978_clear_peaks(client, page, data->id); + ret = ltc2978_clear_peaks(data, client, page); break; case PMBUS_VIRT_RESET_VIN_HISTORY: data->vin_min = 0x7bff; data->vin_max = 0x7c00; - ret = ltc2978_clear_peaks(client, page, data->id); + ret = ltc2978_clear_peaks(data, client, page); break; case PMBUS_VIRT_RESET_TEMP_HISTORY: data->temp_min[page] = 0x7bff; data->temp_max[page] = 0x7c00; - ret = ltc2978_clear_peaks(client, page, data->id); + ret = ltc2978_clear_peaks(data, client, page); break; default: + ret = ltc_wait_ready(client); + if (ret < 0) + return ret; ret = -ENODATA; break; } @@ -366,10 +500,17 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page, static const struct i2c_device_id ltc2978_id[] = { {"ltc2974", ltc2974}, + {"ltc2975", ltc2975}, {"ltc2977", ltc2977}, {"ltc2978", ltc2978}, + {"ltc2980", ltc2980}, {"ltc3880", ltc3880}, + {"ltc3882", ltc3882}, {"ltc3883", ltc3883}, + {"ltc3886", ltc3886}, + {"ltc3887", ltc3887}, + {"ltm2987", ltm2987}, + {"ltm4675", ltm4675}, {"ltm4676", ltm4676}, {} }; @@ -388,10 +529,74 @@ static const struct regulator_desc ltc2978_reg_desc[] = { }; #endif /* CONFIG_SENSORS_LTC2978_REGULATOR */ +static int ltc2978_get_id(struct i2c_client *client) +{ + int chip_id; + + chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID); + if (chip_id < 0) { + const struct i2c_device_id *id; + u8 buf[I2C_SMBUS_BLOCK_MAX]; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); + if (ret < 0) + return ret; + if (ret < 3 || strncmp(buf, "LTC", 3)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); + if (ret < 0) + return ret; + for (id = <c2978_id[0]; strlen(id->name); id++) { + if (!strncasecmp(id->name, buf, strlen(id->name))) + return (int)id->driver_data; + } + return -ENODEV; + } + + chip_id &= LTC2978_ID_MASK; + + if (chip_id == LTC2974_ID) + return ltc2974; + else if (chip_id == LTC2975_ID) + return ltc2975; + else if (chip_id == LTC2977_ID) + return ltc2977; + else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2) + return ltc2978; + else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B) + return ltc2980; + else if (chip_id == LTC3880_ID) + return ltc3880; + else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1) + return ltc3882; + else if (chip_id == LTC3883_ID) + return ltc3883; + else if (chip_id == LTC3886_ID) + return ltc3886; + else if (chip_id == LTC3887_ID) + return ltc3887; + else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B) + return ltm2987; + else if (chip_id == LTM4675_ID) + return ltm4675; + else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 || + chip_id == LTM4676A_ID) + return ltm4676; + + dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id); + return -ENODEV; +} + static int ltc2978_probe(struct i2c_client *client, const struct i2c_device_id *id) { - int chip_id, i; + int i, chip_id; struct ltc2978_data *data; struct pmbus_driver_info *info; @@ -404,27 +609,11 @@ static int ltc2978_probe(struct i2c_client *client, if (!data) return -ENOMEM; - chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID); + chip_id = ltc2978_get_id(client); if (chip_id < 0) return chip_id; - if (chip_id == LTC2974_ID_REV1 || chip_id == LTC2974_ID_REV2) { - data->id = ltc2974; - } else if (chip_id == LTC2977_ID) { - data->id = ltc2977; - } else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2 || - chip_id == LTC2978A_ID) { - data->id = ltc2978; - } else if ((chip_id & LTC3880_ID_MASK) == LTC3880_ID) { - data->id = ltc3880; - } else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID) { - data->id = ltc3883; - } else if ((chip_id & LTM4676_ID_MASK) == LTM4676_ID) { - data->id = ltm4676; - } else { - dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id); - return -ENODEV; - } + data->id = chip_id; if (data->id != id->driver_data) dev_warn(&client->dev, "Device mismatch: Configured %s, detected %s\n", @@ -433,6 +622,9 @@ static int ltc2978_probe(struct i2c_client *client, info = &data->info; info->write_word_data = ltc2978_write_word_data; + info->write_byte = ltc_write_byte; + info->read_word_data = ltc_read_word_data; + info->read_byte_data = ltc_read_byte_data; data->vin_min = 0x7bff; data->vin_max = 0x7c00; @@ -461,8 +653,23 @@ static int ltc2978_probe(struct i2c_client *client, | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; } break; + case ltc2975: + info->read_word_data = ltc2975_read_word_data; + info->pages = LTC2974_NUM_PAGES; + info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN + | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_TEMP2; + for (i = 0; i < info->pages; i++) { + info->func[i] |= PMBUS_HAVE_VOUT + | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT; + } + break; case ltc2977: case ltc2978: + case ltc2980: + case ltm2987: info->read_word_data = ltc2978_read_word_data; info->pages = LTC2978_NUM_PAGES; info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT @@ -474,7 +681,10 @@ static int ltc2978_probe(struct i2c_client *client, } break; case ltc3880: + case ltc3887: + case ltm4675: case ltm4676: + data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; info->read_word_data = ltc3880_read_word_data; info->pages = LTC3880_NUM_PAGES; info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN @@ -488,7 +698,23 @@ static int ltc2978_probe(struct i2c_client *client, | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; break; + case ltc3882: + data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; + info->read_word_data = ltc3880_read_word_data; + info->pages = LTC3880_NUM_PAGES; + info->func[0] = PMBUS_HAVE_VIN + | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP + | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; + info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_POUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; + break; case ltc3883: + data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; info->read_word_data = ltc3883_read_word_data; info->pages = LTC3883_NUM_PAGES; info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN @@ -498,6 +724,21 @@ static int ltc2978_probe(struct i2c_client *client, | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; break; + case ltc3886: + data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING; + info->read_word_data = ltc3883_read_word_data; + info->pages = LTC3880_NUM_PAGES; + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN + | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP + | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP; + info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_POUT + | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; + break; default: return -ENODEV; } @@ -517,10 +758,17 @@ static int ltc2978_probe(struct i2c_client *client, #ifdef CONFIG_OF static const struct of_device_id ltc2978_of_match[] = { { .compatible = "lltc,ltc2974" }, + { .compatible = "lltc,ltc2975" }, { .compatible = "lltc,ltc2977" }, { .compatible = "lltc,ltc2978" }, + { .compatible = "lltc,ltc2980" }, { .compatible = "lltc,ltc3880" }, + { .compatible = "lltc,ltc3882" }, { .compatible = "lltc,ltc3883" }, + { .compatible = "lltc,ltc3886" }, + { .compatible = "lltc,ltc3887" }, + { .compatible = "lltc,ltm2987" }, + { .compatible = "lltc,ltm4675" }, { .compatible = "lltc,ltm4676" }, { } }; @@ -540,5 +788,5 @@ static struct i2c_driver ltc2978_driver = { module_i2c_driver(ltc2978_driver); MODULE_AUTHOR("Guenter Roeck"); -MODULE_DESCRIPTION("PMBus driver for LTC2974, LTC2978, LTC3880, LTC3883, and LTM4676"); +MODULE_DESCRIPTION("PMBus driver for LTC2978 and comppatible chips"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/pmbus/max20751.c b/drivers/hwmon/pmbus/max20751.c new file mode 100644 index 000000000..ab74aeae8 --- /dev/null +++ b/drivers/hwmon/pmbus/max20751.c @@ -0,0 +1,64 @@ +/* + * Hardware monitoring driver for Maxim MAX20751 + * + * Copyright (c) 2015 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "pmbus.h" + +static struct pmbus_driver_info max20751_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = vid, + .vrm_version = vr12, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_POUT, +}; + +static int max20751_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + return pmbus_do_probe(client, id, &max20751_info); +} + +static const struct i2c_device_id max20751_id[] = { + {"max20751", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, max20751_id); + +static struct i2c_driver max20751_driver = { + .driver = { + .name = "max20751", + }, + .probe = max20751_probe, + .remove = pmbus_do_remove, + .id_table = max20751_id, +}; + +module_i2c_driver(max20751_driver); + +MODULE_AUTHOR("Guenter Roeck "); +MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c index 7e930c3ce..74a1f6f68 100644 --- a/drivers/hwmon/pmbus/max34440.c +++ b/drivers/hwmon/pmbus/max34440.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -38,10 +39,10 @@ enum chips { max34440, max34441, max34446, max34460, max34461 }; #define MAX34446_MFR_IOUT_AVG 0xe2 #define MAX34446_MFR_TEMPERATURE_AVG 0xe3 -#define MAX34440_STATUS_OC_WARN (1 << 0) -#define MAX34440_STATUS_OC_FAULT (1 << 1) -#define MAX34440_STATUS_OT_FAULT (1 << 5) -#define MAX34440_STATUS_OT_WARN (1 << 6) +#define MAX34440_STATUS_OC_WARN BIT(0) +#define MAX34440_STATUS_OC_FAULT BIT(1) +#define MAX34440_STATUS_OT_FAULT BIT(5) +#define MAX34440_STATUS_OT_WARN BIT(6) struct max34440_data { int id; diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c index f04454a42..dd4883a19 100644 --- a/drivers/hwmon/pmbus/max8688.c +++ b/drivers/hwmon/pmbus/max8688.c @@ -18,6 +18,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -30,15 +31,15 @@ #define MAX8688_MFR_TEMPERATURE_PEAK 0xd6 #define MAX8688_MFG_STATUS 0xd8 -#define MAX8688_STATUS_OC_FAULT (1 << 4) -#define MAX8688_STATUS_OV_FAULT (1 << 5) -#define MAX8688_STATUS_OV_WARNING (1 << 8) -#define MAX8688_STATUS_UV_FAULT (1 << 9) -#define MAX8688_STATUS_UV_WARNING (1 << 10) -#define MAX8688_STATUS_UC_FAULT (1 << 11) -#define MAX8688_STATUS_OC_WARNING (1 << 12) -#define MAX8688_STATUS_OT_FAULT (1 << 13) -#define MAX8688_STATUS_OT_WARNING (1 << 14) +#define MAX8688_STATUS_OC_FAULT BIT(4) +#define MAX8688_STATUS_OV_FAULT BIT(5) +#define MAX8688_STATUS_OV_WARNING BIT(8) +#define MAX8688_STATUS_UV_FAULT BIT(9) +#define MAX8688_STATUS_UV_WARNING BIT(10) +#define MAX8688_STATUS_UC_FAULT BIT(11) +#define MAX8688_STATUS_OC_WARNING BIT(12) +#define MAX8688_STATUS_OT_FAULT BIT(13) +#define MAX8688_STATUS_OT_WARNING BIT(14) static int max8688_read_word_data(struct i2c_client *client, int page, int reg) { diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 554d0249d..0a74991a6 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -129,6 +129,7 @@ static int pmbus_identify(struct i2c_client *client, break; case 1: info->format[PSC_VOLTAGE_OUT] = vid; + info->vrm_version = vr11; break; case 2: info->format[PSC_VOLTAGE_OUT] = direct; @@ -193,6 +194,10 @@ static const struct i2c_device_id pmbus_id[] = { {"pdt012", 1}, {"pmbus", 0}, {"tps40400", 1}, + {"tps544b20", 1}, + {"tps544b25", 1}, + {"tps544c20", 1}, + {"tps544c25", 1}, {"udt020", 1}, {} }; diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index 89a23ff83..bfcb13bae 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -19,114 +19,116 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include - #ifndef PMBUS_H #define PMBUS_H +#include +#include + /* * Registers */ -#define PMBUS_PAGE 0x00 -#define PMBUS_OPERATION 0x01 -#define PMBUS_ON_OFF_CONFIG 0x02 -#define PMBUS_CLEAR_FAULTS 0x03 -#define PMBUS_PHASE 0x04 - -#define PMBUS_CAPABILITY 0x19 -#define PMBUS_QUERY 0x1A - -#define PMBUS_VOUT_MODE 0x20 -#define PMBUS_VOUT_COMMAND 0x21 -#define PMBUS_VOUT_TRIM 0x22 -#define PMBUS_VOUT_CAL_OFFSET 0x23 -#define PMBUS_VOUT_MAX 0x24 -#define PMBUS_VOUT_MARGIN_HIGH 0x25 -#define PMBUS_VOUT_MARGIN_LOW 0x26 -#define PMBUS_VOUT_TRANSITION_RATE 0x27 -#define PMBUS_VOUT_DROOP 0x28 -#define PMBUS_VOUT_SCALE_LOOP 0x29 -#define PMBUS_VOUT_SCALE_MONITOR 0x2A - -#define PMBUS_COEFFICIENTS 0x30 -#define PMBUS_POUT_MAX 0x31 - -#define PMBUS_FAN_CONFIG_12 0x3A -#define PMBUS_FAN_COMMAND_1 0x3B -#define PMBUS_FAN_COMMAND_2 0x3C -#define PMBUS_FAN_CONFIG_34 0x3D -#define PMBUS_FAN_COMMAND_3 0x3E -#define PMBUS_FAN_COMMAND_4 0x3F - -#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 -#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 -#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 -#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 -#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 -#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 -#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 -#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 -#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 -#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 -#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A -#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B -#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C - -#define PMBUS_OT_FAULT_LIMIT 0x4F -#define PMBUS_OT_FAULT_RESPONSE 0x50 -#define PMBUS_OT_WARN_LIMIT 0x51 -#define PMBUS_UT_WARN_LIMIT 0x52 -#define PMBUS_UT_FAULT_LIMIT 0x53 -#define PMBUS_UT_FAULT_RESPONSE 0x54 -#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 -#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 -#define PMBUS_VIN_OV_WARN_LIMIT 0x57 -#define PMBUS_VIN_UV_WARN_LIMIT 0x58 -#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 - -#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B -#define PMBUS_IIN_OC_WARN_LIMIT 0x5D - -#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 -#define PMBUS_POUT_OP_WARN_LIMIT 0x6A -#define PMBUS_PIN_OP_WARN_LIMIT 0x6B - -#define PMBUS_STATUS_BYTE 0x78 -#define PMBUS_STATUS_WORD 0x79 -#define PMBUS_STATUS_VOUT 0x7A -#define PMBUS_STATUS_IOUT 0x7B -#define PMBUS_STATUS_INPUT 0x7C -#define PMBUS_STATUS_TEMPERATURE 0x7D -#define PMBUS_STATUS_CML 0x7E -#define PMBUS_STATUS_OTHER 0x7F -#define PMBUS_STATUS_MFR_SPECIFIC 0x80 -#define PMBUS_STATUS_FAN_12 0x81 -#define PMBUS_STATUS_FAN_34 0x82 - -#define PMBUS_READ_VIN 0x88 -#define PMBUS_READ_IIN 0x89 -#define PMBUS_READ_VCAP 0x8A -#define PMBUS_READ_VOUT 0x8B -#define PMBUS_READ_IOUT 0x8C -#define PMBUS_READ_TEMPERATURE_1 0x8D -#define PMBUS_READ_TEMPERATURE_2 0x8E -#define PMBUS_READ_TEMPERATURE_3 0x8F -#define PMBUS_READ_FAN_SPEED_1 0x90 -#define PMBUS_READ_FAN_SPEED_2 0x91 -#define PMBUS_READ_FAN_SPEED_3 0x92 -#define PMBUS_READ_FAN_SPEED_4 0x93 -#define PMBUS_READ_DUTY_CYCLE 0x94 -#define PMBUS_READ_FREQUENCY 0x95 -#define PMBUS_READ_POUT 0x96 -#define PMBUS_READ_PIN 0x97 - -#define PMBUS_REVISION 0x98 -#define PMBUS_MFR_ID 0x99 -#define PMBUS_MFR_MODEL 0x9A -#define PMBUS_MFR_REVISION 0x9B -#define PMBUS_MFR_LOCATION 0x9C -#define PMBUS_MFR_DATE 0x9D -#define PMBUS_MFR_SERIAL 0x9E +enum pmbus_regs { + PMBUS_PAGE = 0x00, + PMBUS_OPERATION = 0x01, + PMBUS_ON_OFF_CONFIG = 0x02, + PMBUS_CLEAR_FAULTS = 0x03, + PMBUS_PHASE = 0x04, + + PMBUS_CAPABILITY = 0x19, + PMBUS_QUERY = 0x1A, + + PMBUS_VOUT_MODE = 0x20, + PMBUS_VOUT_COMMAND = 0x21, + PMBUS_VOUT_TRIM = 0x22, + PMBUS_VOUT_CAL_OFFSET = 0x23, + PMBUS_VOUT_MAX = 0x24, + PMBUS_VOUT_MARGIN_HIGH = 0x25, + PMBUS_VOUT_MARGIN_LOW = 0x26, + PMBUS_VOUT_TRANSITION_RATE = 0x27, + PMBUS_VOUT_DROOP = 0x28, + PMBUS_VOUT_SCALE_LOOP = 0x29, + PMBUS_VOUT_SCALE_MONITOR = 0x2A, + + PMBUS_COEFFICIENTS = 0x30, + PMBUS_POUT_MAX = 0x31, + + PMBUS_FAN_CONFIG_12 = 0x3A, + PMBUS_FAN_COMMAND_1 = 0x3B, + PMBUS_FAN_COMMAND_2 = 0x3C, + PMBUS_FAN_CONFIG_34 = 0x3D, + PMBUS_FAN_COMMAND_3 = 0x3E, + PMBUS_FAN_COMMAND_4 = 0x3F, + + PMBUS_VOUT_OV_FAULT_LIMIT = 0x40, + PMBUS_VOUT_OV_FAULT_RESPONSE = 0x41, + PMBUS_VOUT_OV_WARN_LIMIT = 0x42, + PMBUS_VOUT_UV_WARN_LIMIT = 0x43, + PMBUS_VOUT_UV_FAULT_LIMIT = 0x44, + PMBUS_VOUT_UV_FAULT_RESPONSE = 0x45, + PMBUS_IOUT_OC_FAULT_LIMIT = 0x46, + PMBUS_IOUT_OC_FAULT_RESPONSE = 0x47, + PMBUS_IOUT_OC_LV_FAULT_LIMIT = 0x48, + PMBUS_IOUT_OC_LV_FAULT_RESPONSE = 0x49, + PMBUS_IOUT_OC_WARN_LIMIT = 0x4A, + PMBUS_IOUT_UC_FAULT_LIMIT = 0x4B, + PMBUS_IOUT_UC_FAULT_RESPONSE = 0x4C, + + PMBUS_OT_FAULT_LIMIT = 0x4F, + PMBUS_OT_FAULT_RESPONSE = 0x50, + PMBUS_OT_WARN_LIMIT = 0x51, + PMBUS_UT_WARN_LIMIT = 0x52, + PMBUS_UT_FAULT_LIMIT = 0x53, + PMBUS_UT_FAULT_RESPONSE = 0x54, + PMBUS_VIN_OV_FAULT_LIMIT = 0x55, + PMBUS_VIN_OV_FAULT_RESPONSE = 0x56, + PMBUS_VIN_OV_WARN_LIMIT = 0x57, + PMBUS_VIN_UV_WARN_LIMIT = 0x58, + PMBUS_VIN_UV_FAULT_LIMIT = 0x59, + + PMBUS_IIN_OC_FAULT_LIMIT = 0x5B, + PMBUS_IIN_OC_WARN_LIMIT = 0x5D, + + PMBUS_POUT_OP_FAULT_LIMIT = 0x68, + PMBUS_POUT_OP_WARN_LIMIT = 0x6A, + PMBUS_PIN_OP_WARN_LIMIT = 0x6B, + + PMBUS_STATUS_BYTE = 0x78, + PMBUS_STATUS_WORD = 0x79, + PMBUS_STATUS_VOUT = 0x7A, + PMBUS_STATUS_IOUT = 0x7B, + PMBUS_STATUS_INPUT = 0x7C, + PMBUS_STATUS_TEMPERATURE = 0x7D, + PMBUS_STATUS_CML = 0x7E, + PMBUS_STATUS_OTHER = 0x7F, + PMBUS_STATUS_MFR_SPECIFIC = 0x80, + PMBUS_STATUS_FAN_12 = 0x81, + PMBUS_STATUS_FAN_34 = 0x82, + + PMBUS_READ_VIN = 0x88, + PMBUS_READ_IIN = 0x89, + PMBUS_READ_VCAP = 0x8A, + PMBUS_READ_VOUT = 0x8B, + PMBUS_READ_IOUT = 0x8C, + PMBUS_READ_TEMPERATURE_1 = 0x8D, + PMBUS_READ_TEMPERATURE_2 = 0x8E, + PMBUS_READ_TEMPERATURE_3 = 0x8F, + PMBUS_READ_FAN_SPEED_1 = 0x90, + PMBUS_READ_FAN_SPEED_2 = 0x91, + PMBUS_READ_FAN_SPEED_3 = 0x92, + PMBUS_READ_FAN_SPEED_4 = 0x93, + PMBUS_READ_DUTY_CYCLE = 0x94, + PMBUS_READ_FREQUENCY = 0x95, + PMBUS_READ_POUT = 0x96, + PMBUS_READ_PIN = 0x97, + + PMBUS_REVISION = 0x98, + PMBUS_MFR_ID = 0x99, + PMBUS_MFR_MODEL = 0x9A, + PMBUS_MFR_REVISION = 0x9B, + PMBUS_MFR_LOCATION = 0x9C, + PMBUS_MFR_DATE = 0x9D, + PMBUS_MFR_SERIAL = 0x9E, /* * Virtual registers. @@ -148,55 +150,58 @@ * the calling PMBus core code will abort if the chip driver returns an error * code when reading or writing virtual registers. */ -#define PMBUS_VIRT_BASE 0x100 -#define PMBUS_VIRT_READ_TEMP_AVG (PMBUS_VIRT_BASE + 0) -#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 1) -#define PMBUS_VIRT_READ_TEMP_MAX (PMBUS_VIRT_BASE + 2) -#define PMBUS_VIRT_RESET_TEMP_HISTORY (PMBUS_VIRT_BASE + 3) -#define PMBUS_VIRT_READ_VIN_AVG (PMBUS_VIRT_BASE + 4) -#define PMBUS_VIRT_READ_VIN_MIN (PMBUS_VIRT_BASE + 5) -#define PMBUS_VIRT_READ_VIN_MAX (PMBUS_VIRT_BASE + 6) -#define PMBUS_VIRT_RESET_VIN_HISTORY (PMBUS_VIRT_BASE + 7) -#define PMBUS_VIRT_READ_IIN_AVG (PMBUS_VIRT_BASE + 8) -#define PMBUS_VIRT_READ_IIN_MIN (PMBUS_VIRT_BASE + 9) -#define PMBUS_VIRT_READ_IIN_MAX (PMBUS_VIRT_BASE + 10) -#define PMBUS_VIRT_RESET_IIN_HISTORY (PMBUS_VIRT_BASE + 11) -#define PMBUS_VIRT_READ_PIN_AVG (PMBUS_VIRT_BASE + 12) -#define PMBUS_VIRT_READ_PIN_MAX (PMBUS_VIRT_BASE + 13) -#define PMBUS_VIRT_RESET_PIN_HISTORY (PMBUS_VIRT_BASE + 14) -#define PMBUS_VIRT_READ_POUT_AVG (PMBUS_VIRT_BASE + 15) -#define PMBUS_VIRT_READ_POUT_MAX (PMBUS_VIRT_BASE + 16) -#define PMBUS_VIRT_RESET_POUT_HISTORY (PMBUS_VIRT_BASE + 17) -#define PMBUS_VIRT_READ_VOUT_AVG (PMBUS_VIRT_BASE + 18) -#define PMBUS_VIRT_READ_VOUT_MIN (PMBUS_VIRT_BASE + 19) -#define PMBUS_VIRT_READ_VOUT_MAX (PMBUS_VIRT_BASE + 20) -#define PMBUS_VIRT_RESET_VOUT_HISTORY (PMBUS_VIRT_BASE + 21) -#define PMBUS_VIRT_READ_IOUT_AVG (PMBUS_VIRT_BASE + 22) -#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 23) -#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 24) -#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 25) -#define PMBUS_VIRT_READ_TEMP2_AVG (PMBUS_VIRT_BASE + 26) -#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 27) -#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 28) -#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 29) - -#define PMBUS_VIRT_READ_VMON (PMBUS_VIRT_BASE + 30) -#define PMBUS_VIRT_VMON_UV_WARN_LIMIT (PMBUS_VIRT_BASE + 31) -#define PMBUS_VIRT_VMON_OV_WARN_LIMIT (PMBUS_VIRT_BASE + 32) -#define PMBUS_VIRT_VMON_UV_FAULT_LIMIT (PMBUS_VIRT_BASE + 33) -#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT (PMBUS_VIRT_BASE + 34) -#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35) + PMBUS_VIRT_BASE = 0x100, + PMBUS_VIRT_READ_TEMP_AVG, + PMBUS_VIRT_READ_TEMP_MIN, + PMBUS_VIRT_READ_TEMP_MAX, + PMBUS_VIRT_RESET_TEMP_HISTORY, + PMBUS_VIRT_READ_VIN_AVG, + PMBUS_VIRT_READ_VIN_MIN, + PMBUS_VIRT_READ_VIN_MAX, + PMBUS_VIRT_RESET_VIN_HISTORY, + PMBUS_VIRT_READ_IIN_AVG, + PMBUS_VIRT_READ_IIN_MIN, + PMBUS_VIRT_READ_IIN_MAX, + PMBUS_VIRT_RESET_IIN_HISTORY, + PMBUS_VIRT_READ_PIN_AVG, + PMBUS_VIRT_READ_PIN_MIN, + PMBUS_VIRT_READ_PIN_MAX, + PMBUS_VIRT_RESET_PIN_HISTORY, + PMBUS_VIRT_READ_POUT_AVG, + PMBUS_VIRT_READ_POUT_MIN, + PMBUS_VIRT_READ_POUT_MAX, + PMBUS_VIRT_RESET_POUT_HISTORY, + PMBUS_VIRT_READ_VOUT_AVG, + PMBUS_VIRT_READ_VOUT_MIN, + PMBUS_VIRT_READ_VOUT_MAX, + PMBUS_VIRT_RESET_VOUT_HISTORY, + PMBUS_VIRT_READ_IOUT_AVG, + PMBUS_VIRT_READ_IOUT_MIN, + PMBUS_VIRT_READ_IOUT_MAX, + PMBUS_VIRT_RESET_IOUT_HISTORY, + PMBUS_VIRT_READ_TEMP2_AVG, + PMBUS_VIRT_READ_TEMP2_MIN, + PMBUS_VIRT_READ_TEMP2_MAX, + PMBUS_VIRT_RESET_TEMP2_HISTORY, + + PMBUS_VIRT_READ_VMON, + PMBUS_VIRT_VMON_UV_WARN_LIMIT, + PMBUS_VIRT_VMON_OV_WARN_LIMIT, + PMBUS_VIRT_VMON_UV_FAULT_LIMIT, + PMBUS_VIRT_VMON_OV_FAULT_LIMIT, + PMBUS_VIRT_STATUS_VMON, +}; /* * OPERATION */ -#define PB_OPERATION_CONTROL_ON (1<<7) +#define PB_OPERATION_CONTROL_ON BIT(7) /* * CAPABILITY */ -#define PB_CAPABILITY_SMBALERT (1<<4) -#define PB_CAPABILITY_ERROR_CHECK (1<<7) +#define PB_CAPABILITY_SMBALERT BIT(4) +#define PB_CAPABILITY_ERROR_CHECK BIT(7) /* * VOUT_MODE @@ -211,94 +216,94 @@ /* * Fan configuration */ -#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) -#define PB_FAN_2_RPM (1 << 2) -#define PB_FAN_2_INSTALLED (1 << 3) -#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) -#define PB_FAN_1_RPM (1 << 6) -#define PB_FAN_1_INSTALLED (1 << 7) +#define PB_FAN_2_PULSE_MASK (BIT(0) | BIT(1)) +#define PB_FAN_2_RPM BIT(2) +#define PB_FAN_2_INSTALLED BIT(3) +#define PB_FAN_1_PULSE_MASK (BIT(4) | BIT(5)) +#define PB_FAN_1_RPM BIT(6) +#define PB_FAN_1_INSTALLED BIT(7) /* * STATUS_BYTE, STATUS_WORD (lower) */ -#define PB_STATUS_NONE_ABOVE (1<<0) -#define PB_STATUS_CML (1<<1) -#define PB_STATUS_TEMPERATURE (1<<2) -#define PB_STATUS_VIN_UV (1<<3) -#define PB_STATUS_IOUT_OC (1<<4) -#define PB_STATUS_VOUT_OV (1<<5) -#define PB_STATUS_OFF (1<<6) -#define PB_STATUS_BUSY (1<<7) +#define PB_STATUS_NONE_ABOVE BIT(0) +#define PB_STATUS_CML BIT(1) +#define PB_STATUS_TEMPERATURE BIT(2) +#define PB_STATUS_VIN_UV BIT(3) +#define PB_STATUS_IOUT_OC BIT(4) +#define PB_STATUS_VOUT_OV BIT(5) +#define PB_STATUS_OFF BIT(6) +#define PB_STATUS_BUSY BIT(7) /* * STATUS_WORD (upper) */ -#define PB_STATUS_UNKNOWN (1<<8) -#define PB_STATUS_OTHER (1<<9) -#define PB_STATUS_FANS (1<<10) -#define PB_STATUS_POWER_GOOD_N (1<<11) -#define PB_STATUS_WORD_MFR (1<<12) -#define PB_STATUS_INPUT (1<<13) -#define PB_STATUS_IOUT_POUT (1<<14) -#define PB_STATUS_VOUT (1<<15) +#define PB_STATUS_UNKNOWN BIT(8) +#define PB_STATUS_OTHER BIT(9) +#define PB_STATUS_FANS BIT(10) +#define PB_STATUS_POWER_GOOD_N BIT(11) +#define PB_STATUS_WORD_MFR BIT(12) +#define PB_STATUS_INPUT BIT(13) +#define PB_STATUS_IOUT_POUT BIT(14) +#define PB_STATUS_VOUT BIT(15) /* * STATUS_IOUT */ -#define PB_POUT_OP_WARNING (1<<0) -#define PB_POUT_OP_FAULT (1<<1) -#define PB_POWER_LIMITING (1<<2) -#define PB_CURRENT_SHARE_FAULT (1<<3) -#define PB_IOUT_UC_FAULT (1<<4) -#define PB_IOUT_OC_WARNING (1<<5) -#define PB_IOUT_OC_LV_FAULT (1<<6) -#define PB_IOUT_OC_FAULT (1<<7) +#define PB_POUT_OP_WARNING BIT(0) +#define PB_POUT_OP_FAULT BIT(1) +#define PB_POWER_LIMITING BIT(2) +#define PB_CURRENT_SHARE_FAULT BIT(3) +#define PB_IOUT_UC_FAULT BIT(4) +#define PB_IOUT_OC_WARNING BIT(5) +#define PB_IOUT_OC_LV_FAULT BIT(6) +#define PB_IOUT_OC_FAULT BIT(7) /* * STATUS_VOUT, STATUS_INPUT */ -#define PB_VOLTAGE_UV_FAULT (1<<4) -#define PB_VOLTAGE_UV_WARNING (1<<5) -#define PB_VOLTAGE_OV_WARNING (1<<6) -#define PB_VOLTAGE_OV_FAULT (1<<7) +#define PB_VOLTAGE_UV_FAULT BIT(4) +#define PB_VOLTAGE_UV_WARNING BIT(5) +#define PB_VOLTAGE_OV_WARNING BIT(6) +#define PB_VOLTAGE_OV_FAULT BIT(7) /* * STATUS_INPUT */ -#define PB_PIN_OP_WARNING (1<<0) -#define PB_IIN_OC_WARNING (1<<1) -#define PB_IIN_OC_FAULT (1<<2) +#define PB_PIN_OP_WARNING BIT(0) +#define PB_IIN_OC_WARNING BIT(1) +#define PB_IIN_OC_FAULT BIT(2) /* * STATUS_TEMPERATURE */ -#define PB_TEMP_UT_FAULT (1<<4) -#define PB_TEMP_UT_WARNING (1<<5) -#define PB_TEMP_OT_WARNING (1<<6) -#define PB_TEMP_OT_FAULT (1<<7) +#define PB_TEMP_UT_FAULT BIT(4) +#define PB_TEMP_UT_WARNING BIT(5) +#define PB_TEMP_OT_WARNING BIT(6) +#define PB_TEMP_OT_FAULT BIT(7) /* * STATUS_FAN */ -#define PB_FAN_AIRFLOW_WARNING (1<<0) -#define PB_FAN_AIRFLOW_FAULT (1<<1) -#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) -#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) -#define PB_FAN_FAN2_WARNING (1<<4) -#define PB_FAN_FAN1_WARNING (1<<5) -#define PB_FAN_FAN2_FAULT (1<<6) -#define PB_FAN_FAN1_FAULT (1<<7) +#define PB_FAN_AIRFLOW_WARNING BIT(0) +#define PB_FAN_AIRFLOW_FAULT BIT(1) +#define PB_FAN_FAN2_SPEED_OVERRIDE BIT(2) +#define PB_FAN_FAN1_SPEED_OVERRIDE BIT(3) +#define PB_FAN_FAN2_WARNING BIT(4) +#define PB_FAN_FAN1_WARNING BIT(5) +#define PB_FAN_FAN2_FAULT BIT(6) +#define PB_FAN_FAN1_FAULT BIT(7) /* * CML_FAULT_STATUS */ -#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) -#define PB_CML_FAULT_OTHER_COMM (1<<1) -#define PB_CML_FAULT_PROCESSOR (1<<3) -#define PB_CML_FAULT_MEMORY (1<<4) -#define PB_CML_FAULT_PACKET_ERROR (1<<5) -#define PB_CML_FAULT_INVALID_DATA (1<<6) -#define PB_CML_FAULT_INVALID_COMMAND (1<<7) +#define PB_CML_FAULT_OTHER_MEM_LOGIC BIT(0) +#define PB_CML_FAULT_OTHER_COMM BIT(1) +#define PB_CML_FAULT_PROCESSOR BIT(3) +#define PB_CML_FAULT_MEMORY BIT(4) +#define PB_CML_FAULT_PACKET_ERROR BIT(5) +#define PB_CML_FAULT_INVALID_DATA BIT(6) +#define PB_CML_FAULT_INVALID_COMMAND BIT(7) enum pmbus_sensor_classes { PSC_VOLTAGE_IN = 0, @@ -314,32 +319,34 @@ enum pmbus_sensor_classes { #define PMBUS_PAGES 32 /* Per PMBus specification */ /* Functionality bit mask */ -#define PMBUS_HAVE_VIN (1 << 0) -#define PMBUS_HAVE_VCAP (1 << 1) -#define PMBUS_HAVE_VOUT (1 << 2) -#define PMBUS_HAVE_IIN (1 << 3) -#define PMBUS_HAVE_IOUT (1 << 4) -#define PMBUS_HAVE_PIN (1 << 5) -#define PMBUS_HAVE_POUT (1 << 6) -#define PMBUS_HAVE_FAN12 (1 << 7) -#define PMBUS_HAVE_FAN34 (1 << 8) -#define PMBUS_HAVE_TEMP (1 << 9) -#define PMBUS_HAVE_TEMP2 (1 << 10) -#define PMBUS_HAVE_TEMP3 (1 << 11) -#define PMBUS_HAVE_STATUS_VOUT (1 << 12) -#define PMBUS_HAVE_STATUS_IOUT (1 << 13) -#define PMBUS_HAVE_STATUS_INPUT (1 << 14) -#define PMBUS_HAVE_STATUS_TEMP (1 << 15) -#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) -#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) -#define PMBUS_HAVE_VMON (1 << 18) -#define PMBUS_HAVE_STATUS_VMON (1 << 19) +#define PMBUS_HAVE_VIN BIT(0) +#define PMBUS_HAVE_VCAP BIT(1) +#define PMBUS_HAVE_VOUT BIT(2) +#define PMBUS_HAVE_IIN BIT(3) +#define PMBUS_HAVE_IOUT BIT(4) +#define PMBUS_HAVE_PIN BIT(5) +#define PMBUS_HAVE_POUT BIT(6) +#define PMBUS_HAVE_FAN12 BIT(7) +#define PMBUS_HAVE_FAN34 BIT(8) +#define PMBUS_HAVE_TEMP BIT(9) +#define PMBUS_HAVE_TEMP2 BIT(10) +#define PMBUS_HAVE_TEMP3 BIT(11) +#define PMBUS_HAVE_STATUS_VOUT BIT(12) +#define PMBUS_HAVE_STATUS_IOUT BIT(13) +#define PMBUS_HAVE_STATUS_INPUT BIT(14) +#define PMBUS_HAVE_STATUS_TEMP BIT(15) +#define PMBUS_HAVE_STATUS_FAN12 BIT(16) +#define PMBUS_HAVE_STATUS_FAN34 BIT(17) +#define PMBUS_HAVE_VMON BIT(18) +#define PMBUS_HAVE_STATUS_VMON BIT(19) enum pmbus_data_format { linear = 0, direct, vid }; +enum vrm_version { vr11 = 0, vr12 }; struct pmbus_driver_info { int pages; /* Total number of pages */ enum pmbus_data_format format[PSC_NUM_CLASSES]; + enum vrm_version vrm_version; /* * Support one set of coefficients for each sensor type * Used for chips providing data in direct mode. @@ -380,7 +387,7 @@ struct pmbus_driver_info { /* Regulator ops */ -extern struct regulator_ops pmbus_regulator_ops; +extern const struct regulator_ops pmbus_regulator_ops; /* Macro for filling in array of struct regulator_desc */ #define PMBUS_REGULATOR(_name, _id) \ @@ -390,6 +397,7 @@ extern struct regulator_ops pmbus_regulator_ops; .of_match = of_match_ptr(_name # _id), \ .regulators_node = of_match_ptr("regulators"), \ .ops = &pmbus_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ } diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index f2e47c7dd..ba59eaef2 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -515,16 +515,24 @@ static long pmbus_reg2data_direct(struct pmbus_data *data, /* * Convert VID sensor values to milli- or micro-units * depending on sensor type. - * We currently only support VR11. */ static long pmbus_reg2data_vid(struct pmbus_data *data, struct pmbus_sensor *sensor) { long val = sensor->data; + long rv = 0; - if (val < 0x02 || val > 0xb2) - return 0; - return DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100); + switch (data->info->vrm_version) { + case vr11: + if (val >= 0x02 && val <= 0xb2) + rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100); + break; + case vr12: + if (val >= 0x01) + rv = 250 + (val - 1) * 5; + break; + } + return rv; } static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) @@ -1328,6 +1336,10 @@ static const struct pmbus_limit_attr pin_limit_attrs[] = { .reg = PMBUS_VIRT_READ_PIN_AVG, .update = true, .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_PIN_MIN, + .update = true, + .attr = "input_lowest", }, { .reg = PMBUS_VIRT_READ_PIN_MAX, .update = true, @@ -1358,6 +1370,10 @@ static const struct pmbus_limit_attr pout_limit_attrs[] = { .reg = PMBUS_VIRT_READ_POUT_AVG, .update = true, .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_POUT_MIN, + .update = true, + .attr = "input_lowest", }, { .reg = PMBUS_VIRT_READ_POUT_MAX, .update = true, @@ -1735,6 +1751,11 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, } } + /* Enable PEC if the controller supports it */ + ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY); + if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK)) + client->flags |= I2C_CLIENT_PEC; + pmbus_clear_faults(client); if (info->identify) { @@ -1796,7 +1817,7 @@ static int pmbus_regulator_disable(struct regulator_dev *rdev) return _pmbus_regulator_on_off(rdev, 0); } -struct regulator_ops pmbus_regulator_ops = { +const struct regulator_ops pmbus_regulator_ops = { .enable = pmbus_regulator_enable, .disable = pmbus_regulator_disable, .is_enabled = pmbus_regulator_is_enabled, diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c index 819644121..771802d7e 100644 --- a/drivers/hwmon/pmbus/zl6100.c +++ b/drivers/hwmon/pmbus/zl6100.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -44,16 +45,16 @@ struct zl6100_data { #define ZL6100_MFR_CONFIG 0xd0 #define ZL6100_DEVICE_ID 0xe4 -#define ZL6100_MFR_XTEMP_ENABLE (1 << 7) +#define ZL6100_MFR_XTEMP_ENABLE BIT(7) #define MFR_VMON_OV_FAULT_LIMIT 0xf5 #define MFR_VMON_UV_FAULT_LIMIT 0xf6 #define MFR_READ_VMON 0xf7 -#define VMON_UV_WARNING (1 << 5) -#define VMON_OV_WARNING (1 << 4) -#define VMON_UV_FAULT (1 << 1) -#define VMON_OV_FAULT (1 << 0) +#define VMON_UV_WARNING BIT(5) +#define VMON_OV_WARNING BIT(4) +#define VMON_UV_FAULT BIT(1) +#define VMON_OV_FAULT BIT(0) #define ZL6100_WAIT_TIME 1000 /* uS */ -- cgit v1.2.3-54-g00ecf