From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/iio/adc/twl6030-gpadc.c | 1009 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 1009 insertions(+) create mode 100644 drivers/iio/adc/twl6030-gpadc.c (limited to 'drivers/iio/adc/twl6030-gpadc.c') diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c new file mode 100644 index 000000000..df12c57e6 --- /dev/null +++ b/drivers/iio/adc/twl6030-gpadc.c @@ -0,0 +1,1009 @@ +/* + * TWL6030 GPADC module driver + * + * Copyright (C) 2009-2013 Texas Instruments Inc. + * Nishant Kamat + * Balaji T K + * Graeme Gregory + * Girish S Ghongdemath + * Ambresh K + * Oleksandr Kozaruk + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "twl6030_gpadc" + +/* + * twl6030 per TRM has 17 channels, and twl6032 has 19 channels + * 2 test network channels are not used, + * 2 die temperature channels are not used either, as it is not + * defined how to convert ADC value to temperature + */ +#define TWL6030_GPADC_USED_CHANNELS 13 +#define TWL6030_GPADC_MAX_CHANNELS 15 +#define TWL6032_GPADC_USED_CHANNELS 15 +#define TWL6032_GPADC_MAX_CHANNELS 19 +#define TWL6030_GPADC_NUM_TRIM_REGS 16 + +#define TWL6030_GPADC_CTRL_P1 0x05 + +#define TWL6032_GPADC_GPSELECT_ISB 0x07 +#define TWL6032_GPADC_CTRL_P1 0x08 + +#define TWL6032_GPADC_GPCH0_LSB 0x0d +#define TWL6032_GPADC_GPCH0_MSB 0x0e + +#define TWL6030_GPADC_CTRL_P1_SP1 BIT(3) + +#define TWL6030_GPADC_GPCH0_LSB (0x29) + +#define TWL6030_GPADC_RT_SW1_EOC_MASK BIT(5) + +#define TWL6030_GPADC_TRIM1 0xCD + +#define TWL6030_REG_TOGGLE1 0x90 +#define TWL6030_GPADCS BIT(1) +#define TWL6030_GPADCR BIT(0) + +/** + * struct twl6030_chnl_calib - channel calibration + * @gain: slope coefficient for ideal curve + * @gain_error: gain error + * @offset_error: offset of the real curve + */ +struct twl6030_chnl_calib { + s32 gain; + s32 gain_error; + s32 offset_error; +}; + +/** + * struct twl6030_ideal_code - GPADC calibration parameters + * GPADC is calibrated in two points: close to the beginning and + * to the and of the measurable input range + * + * @channel: channel number + * @code1: ideal code for the input at the beginning + * @code2: ideal code for at the end of the range + * @volt1: voltage input at the beginning(low voltage) + * @volt2: voltage input at the end(high voltage) + */ +struct twl6030_ideal_code { + int channel; + u16 code1; + u16 code2; + u16 volt1; + u16 volt2; +}; + +struct twl6030_gpadc_data; + +/** + * struct twl6030_gpadc_platform_data - platform specific data + * @nchannels: number of GPADC channels + * @iio_channels: iio channels + * @twl6030_ideal: pointer to calibration parameters + * @start_conversion: pointer to ADC start conversion function + * @channel_to_reg pointer to ADC function to convert channel to + * register address for reading conversion result + * @calibrate: pointer to calibration function + */ +struct twl6030_gpadc_platform_data { + const int nchannels; + const struct iio_chan_spec *iio_channels; + const struct twl6030_ideal_code *ideal; + int (*start_conversion)(int channel); + u8 (*channel_to_reg)(int channel); + int (*calibrate)(struct twl6030_gpadc_data *gpadc); +}; + +/** + * struct twl6030_gpadc_data - GPADC data + * @dev: device pointer + * @lock: mutual exclusion lock for the structure + * @irq_complete: completion to signal end of conversion + * @twl6030_cal_tbl: pointer to calibration data for each + * channel with gain error and offset + * @pdata: pointer to device specific data + */ +struct twl6030_gpadc_data { + struct device *dev; + struct mutex lock; + struct completion irq_complete; + struct twl6030_chnl_calib *twl6030_cal_tbl; + const struct twl6030_gpadc_platform_data *pdata; +}; + +/* + * channels 11, 12, 13, 15 and 16 have no calibration data + * calibration offset is same for channels 1, 3, 4, 5 + * + * The data is taken from GPADC_TRIM registers description. + * GPADC_TRIM registers keep difference between the code measured + * at volt1 and volt2 input voltages and corresponding code1 and code2 + */ +static const struct twl6030_ideal_code + twl6030_ideal[TWL6030_GPADC_USED_CHANNELS] = { + [0] = { /* ch 0, external, battery type, resistor value */ + .channel = 0, + .code1 = 116, + .code2 = 745, + .volt1 = 141, + .volt2 = 910, + }, + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ + .channel = 1, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [2] = { /* ch 2, external, audio accessory/general purpose */ + .channel = 2, + .code1 = 55, + .code2 = 818, + .volt1 = 101, + .volt2 = 1499, + }, + [3] = { /* ch 3, external, general purpose */ + .channel = 3, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [4] = { /* ch 4, external, temperature measurement/general purpose */ + .channel = 4, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [5] = { /* ch 5, external, general purpose */ + .channel = 5, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [6] = { /* ch 6, external, general purpose */ + .channel = 6, + .code1 = 82, + .code2 = 900, + .volt1 = 100, + .volt2 = 1100, + }, + [7] = { /* ch 7, internal, main battery */ + .channel = 7, + .code1 = 614, + .code2 = 941, + .volt1 = 3001, + .volt2 = 4599, + }, + [8] = { /* ch 8, internal, backup battery */ + .channel = 8, + .code1 = 82, + .code2 = 688, + .volt1 = 501, + .volt2 = 4203, + }, + [9] = { /* ch 9, internal, external charger input */ + .channel = 9, + .code1 = 182, + .code2 = 818, + .volt1 = 2001, + .volt2 = 8996, + }, + [10] = { /* ch 10, internal, VBUS */ + .channel = 10, + .code1 = 149, + .code2 = 818, + .volt1 = 1001, + .volt2 = 5497, + }, + [11] = { /* ch 11, internal, VBUS charging current */ + .channel = 11, + }, + /* ch 12, internal, Die temperature */ + /* ch 13, internal, Die temperature */ + [12] = { /* ch 14, internal, USB ID line */ + .channel = 14, + .code1 = 48, + .code2 = 714, + .volt1 = 323, + .volt2 = 4800, + }, +}; + +static const struct twl6030_ideal_code + twl6032_ideal[TWL6032_GPADC_USED_CHANNELS] = { + [0] = { /* ch 0, external, battery type, resistor value */ + .channel = 0, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [1] = { /* ch 1, external, battery temperature, NTC resistor value */ + .channel = 1, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [2] = { /* ch 2, external, audio accessory/general purpose */ + .channel = 2, + .code1 = 1441, + .code2 = 3276, + .volt1 = 660, + .volt2 = 1500, + }, + [3] = { /* ch 3, external, temperature with external diode/general + purpose */ + .channel = 3, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [4] = { /* ch 4, external, temperature measurement/general purpose */ + .channel = 4, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [5] = { /* ch 5, external, general purpose */ + .channel = 5, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [6] = { /* ch 6, external, general purpose */ + .channel = 6, + .code1 = 1441, + .code2 = 3276, + .volt1 = 440, + .volt2 = 1000, + }, + [7] = { /* ch7, internal, system supply */ + .channel = 7, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2200, + .volt2 = 5000, + }, + [8] = { /* ch8, internal, backup battery */ + .channel = 8, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2200, + .volt2 = 5000, + }, + [9] = { /* ch 9, internal, external charger input */ + .channel = 9, + .code1 = 1441, + .code2 = 3276, + .volt1 = 3960, + .volt2 = 9000, + }, + [10] = { /* ch10, internal, VBUS */ + .channel = 10, + .code1 = 150, + .code2 = 751, + .volt1 = 1000, + .volt2 = 5000, + }, + [11] = { /* ch 11, internal, VBUS DC-DC output current */ + .channel = 11, + .code1 = 1441, + .code2 = 3276, + .volt1 = 660, + .volt2 = 1500, + }, + /* ch 12, internal, Die temperature */ + /* ch 13, internal, Die temperature */ + [12] = { /* ch 14, internal, USB ID line */ + .channel = 14, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2420, + .volt2 = 5500, + }, + /* ch 15, internal, test network */ + /* ch 16, internal, test network */ + [13] = { /* ch 17, internal, battery charging current */ + .channel = 17, + }, + [14] = { /* ch 18, internal, battery voltage */ + .channel = 18, + .code1 = 1441, + .code2 = 3276, + .volt1 = 2200, + .volt2 = 5000, + }, +}; + +static inline int twl6030_gpadc_write(u8 reg, u8 val) +{ + return twl_i2c_write_u8(TWL6030_MODULE_GPADC, val, reg); +} + +static inline int twl6030_gpadc_read(u8 reg, u8 *val) +{ + + return twl_i2c_read(TWL6030_MODULE_GPADC, val, reg, 2); +} + +static int twl6030_gpadc_enable_irq(u8 mask) +{ + int ret; + + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_LINE_B); + if (ret < 0) + return ret; + + ret = twl6030_interrupt_unmask(mask, REG_INT_MSK_STS_B); + + return ret; +} + +static void twl6030_gpadc_disable_irq(u8 mask) +{ + twl6030_interrupt_mask(mask, REG_INT_MSK_LINE_B); + twl6030_interrupt_mask(mask, REG_INT_MSK_STS_B); +} + +static irqreturn_t twl6030_gpadc_irq_handler(int irq, void *indio_dev) +{ + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); + + complete(&gpadc->irq_complete); + + return IRQ_HANDLED; +} + +static int twl6030_start_conversion(int channel) +{ + return twl6030_gpadc_write(TWL6030_GPADC_CTRL_P1, + TWL6030_GPADC_CTRL_P1_SP1); +} + +static int twl6032_start_conversion(int channel) +{ + int ret; + + ret = twl6030_gpadc_write(TWL6032_GPADC_GPSELECT_ISB, channel); + if (ret) + return ret; + + return twl6030_gpadc_write(TWL6032_GPADC_CTRL_P1, + TWL6030_GPADC_CTRL_P1_SP1); +} + +static u8 twl6030_channel_to_reg(int channel) +{ + return TWL6030_GPADC_GPCH0_LSB + 2 * channel; +} + +static u8 twl6032_channel_to_reg(int channel) +{ + /* + * for any prior chosen channel, when the conversion is ready + * the result is avalable in GPCH0_LSB, GPCH0_MSB. + */ + + return TWL6032_GPADC_GPCH0_LSB; +} + +static int twl6030_gpadc_lookup(const struct twl6030_ideal_code *ideal, + int channel, int size) +{ + int i; + + for (i = 0; i < size; i++) + if (ideal[i].channel == channel) + break; + + return i; +} + +static int twl6030_channel_calibrated(const struct twl6030_gpadc_platform_data + *pdata, int channel) +{ + const struct twl6030_ideal_code *ideal = pdata->ideal; + int i; + + i = twl6030_gpadc_lookup(ideal, channel, pdata->nchannels); + /* not calibrated channels have 0 in all structure members */ + return pdata->ideal[i].code2; +} + +static int twl6030_gpadc_make_correction(struct twl6030_gpadc_data *gpadc, + int channel, int raw_code) +{ + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; + int corrected_code; + int i; + + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); + corrected_code = ((raw_code * 1000) - + gpadc->twl6030_cal_tbl[i].offset_error) / + gpadc->twl6030_cal_tbl[i].gain_error; + + return corrected_code; +} + +static int twl6030_gpadc_get_raw(struct twl6030_gpadc_data *gpadc, + int channel, int *res) +{ + u8 reg = gpadc->pdata->channel_to_reg(channel); + __le16 val; + int raw_code; + int ret; + + ret = twl6030_gpadc_read(reg, (u8 *)&val); + if (ret) { + dev_dbg(gpadc->dev, "unable to read register 0x%X\n", reg); + return ret; + } + + raw_code = le16_to_cpu(val); + dev_dbg(gpadc->dev, "GPADC raw code: %d", raw_code); + + if (twl6030_channel_calibrated(gpadc->pdata, channel)) + *res = twl6030_gpadc_make_correction(gpadc, channel, raw_code); + else + *res = raw_code; + + return ret; +} + +static int twl6030_gpadc_get_processed(struct twl6030_gpadc_data *gpadc, + int channel, int *val) +{ + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; + int corrected_code; + int channel_value; + int i; + int ret; + + ret = twl6030_gpadc_get_raw(gpadc, channel, &corrected_code); + if (ret) + return ret; + + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); + channel_value = corrected_code * + gpadc->twl6030_cal_tbl[i].gain; + + /* Shift back into mV range */ + channel_value /= 1000; + + dev_dbg(gpadc->dev, "GPADC corrected code: %d", corrected_code); + dev_dbg(gpadc->dev, "GPADC value: %d", channel_value); + + *val = channel_value; + + return ret; +} + +static int twl6030_gpadc_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct twl6030_gpadc_data *gpadc = iio_priv(indio_dev); + int ret; + long timeout; + + mutex_lock(&gpadc->lock); + + ret = gpadc->pdata->start_conversion(chan->channel); + if (ret) { + dev_err(gpadc->dev, "failed to start conversion\n"); + goto err; + } + /* wait for conversion to complete */ + timeout = wait_for_completion_interruptible_timeout( + &gpadc->irq_complete, msecs_to_jiffies(5000)); + if (timeout == 0) { + ret = -ETIMEDOUT; + goto err; + } else if (timeout < 0) { + ret = -EINTR; + goto err; + } + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = twl6030_gpadc_get_raw(gpadc, chan->channel, val); + ret = ret ? -EIO : IIO_VAL_INT; + break; + + case IIO_CHAN_INFO_PROCESSED: + ret = twl6030_gpadc_get_processed(gpadc, chan->channel, val); + ret = ret ? -EIO : IIO_VAL_INT; + break; + + default: + break; + } +err: + mutex_unlock(&gpadc->lock); + + return ret; +} + +/* + * The GPADC channels are calibrated using a two point calibration method. + * The channels measured with two known values: volt1 and volt2, and + * ideal corresponding output codes are known: code1, code2. + * The difference(d1, d2) between ideal and measured codes stored in trim + * registers. + * The goal is to find offset and gain of the real curve for each calibrated + * channel. + * gain: k = 1 + ((d2 - d1) / (x2 - x1)) + * offset: b = d1 + (k - 1) * x1 + */ +static void twl6030_calibrate_channel(struct twl6030_gpadc_data *gpadc, + int channel, int d1, int d2) +{ + int b, k, gain, x1, x2, i; + const struct twl6030_ideal_code *ideal = gpadc->pdata->ideal; + + i = twl6030_gpadc_lookup(ideal, channel, gpadc->pdata->nchannels); + + /* Gain */ + gain = ((ideal[i].volt2 - ideal[i].volt1) * 1000) / + (ideal[i].code2 - ideal[i].code1); + + x1 = ideal[i].code1; + x2 = ideal[i].code2; + + /* k - real curve gain */ + k = 1000 + (((d2 - d1) * 1000) / (x2 - x1)); + + /* b - offset of the real curve gain */ + b = (d1 * 1000) - (k - 1000) * x1; + + gpadc->twl6030_cal_tbl[i].gain = gain; + gpadc->twl6030_cal_tbl[i].gain_error = k; + gpadc->twl6030_cal_tbl[i].offset_error = b; + + dev_dbg(gpadc->dev, "GPADC d1 for Chn: %d = %d\n", channel, d1); + dev_dbg(gpadc->dev, "GPADC d2 for Chn: %d = %d\n", channel, d2); + dev_dbg(gpadc->dev, "GPADC x1 for Chn: %d = %d\n", channel, x1); + dev_dbg(gpadc->dev, "GPADC x2 for Chn: %d = %d\n", channel, x2); + dev_dbg(gpadc->dev, "GPADC Gain for Chn: %d = %d\n", channel, gain); + dev_dbg(gpadc->dev, "GPADC k for Chn: %d = %d\n", channel, k); + dev_dbg(gpadc->dev, "GPADC b for Chn: %d = %d\n", channel, b); +} + +static inline int twl6030_gpadc_get_trim_offset(s8 d) +{ + /* + * XXX NOTE! + * bit 0 - sign, bit 7 - reserved, 6..1 - trim value + * though, the documentation states that trim value + * is absolute value, the correct conversion results are + * obtained if the value is interpreted as 2's complement. + */ + __u32 temp = ((d & 0x7f) >> 1) | ((d & 1) << 6); + + return sign_extend32(temp, 6); +} + +static int twl6030_calibration(struct twl6030_gpadc_data *gpadc) +{ + int ret; + int chn; + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; + s8 d1, d2; + + /* + * for calibration two measurements have been performed at + * factory, for some channels, during the production test and + * have been stored in registers. This two stored values are + * used to correct the measurements. The values represent + * offsets for the given input from the output on ideal curve. + */ + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); + if (ret < 0) { + dev_err(gpadc->dev, "calibration failed\n"); + return ret; + } + + for (chn = 0; chn < TWL6030_GPADC_MAX_CHANNELS; chn++) { + + switch (chn) { + case 0: + d1 = trim_regs[0]; + d2 = trim_regs[1]; + break; + case 1: + case 3: + case 4: + case 5: + case 6: + d1 = trim_regs[4]; + d2 = trim_regs[5]; + break; + case 2: + d1 = trim_regs[12]; + d2 = trim_regs[13]; + break; + case 7: + d1 = trim_regs[6]; + d2 = trim_regs[7]; + break; + case 8: + d1 = trim_regs[2]; + d2 = trim_regs[3]; + break; + case 9: + d1 = trim_regs[8]; + d2 = trim_regs[9]; + break; + case 10: + d1 = trim_regs[10]; + d2 = trim_regs[11]; + break; + case 14: + d1 = trim_regs[14]; + d2 = trim_regs[15]; + break; + default: + continue; + } + + d1 = twl6030_gpadc_get_trim_offset(d1); + d2 = twl6030_gpadc_get_trim_offset(d2); + + twl6030_calibrate_channel(gpadc, chn, d1, d2); + } + + return 0; +} + +static int twl6032_get_trim_value(u8 *trim_regs, unsigned int reg0, + unsigned int reg1, unsigned int mask0, unsigned int mask1, + unsigned int shift0) +{ + int val; + + val = (trim_regs[reg0] & mask0) << shift0; + val |= (trim_regs[reg1] & mask1) >> 1; + if (trim_regs[reg1] & 0x01) + val = -val; + + return val; +} + +static int twl6032_calibration(struct twl6030_gpadc_data *gpadc) +{ + int chn, d1 = 0, d2 = 0, temp; + u8 trim_regs[TWL6030_GPADC_NUM_TRIM_REGS]; + int ret; + + ret = twl_i2c_read(TWL6030_MODULE_ID2, trim_regs, + TWL6030_GPADC_TRIM1, TWL6030_GPADC_NUM_TRIM_REGS); + if (ret < 0) { + dev_err(gpadc->dev, "calibration failed\n"); + return ret; + } + + /* + * Loop to calculate the value needed for returning voltages from + * GPADC not values. + * + * gain is calculated to 3 decimal places fixed point. + */ + for (chn = 0; chn < TWL6032_GPADC_MAX_CHANNELS; chn++) { + + switch (chn) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + case 6: + case 11: + case 14: + d1 = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + d2 = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, + 0x06, 2); + break; + case 8: + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + d1 = temp + twl6032_get_trim_value(trim_regs, 7, 6, + 0x18, 0x1E, 1); + + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3F, + 0x06, 2); + d2 = temp + twl6032_get_trim_value(trim_regs, 9, 7, + 0x1F, 0x06, 2); + break; + case 9: + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + d1 = temp + twl6032_get_trim_value(trim_regs, 13, 11, + 0x18, 0x1E, 1); + + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, + 0x06, 2); + d2 = temp + twl6032_get_trim_value(trim_regs, 15, 13, + 0x1F, 0x06, 1); + break; + case 10: + d1 = twl6032_get_trim_value(trim_regs, 10, 8, 0x0f, + 0x0E, 3); + d2 = twl6032_get_trim_value(trim_regs, 14, 12, 0x0f, + 0x0E, 3); + break; + case 7: + case 18: + temp = twl6032_get_trim_value(trim_regs, 2, 0, 0x1f, + 0x06, 2); + + d1 = (trim_regs[4] & 0x7E) >> 1; + if (trim_regs[4] & 0x01) + d1 = -d1; + d1 += temp; + + temp = twl6032_get_trim_value(trim_regs, 3, 1, 0x3f, + 0x06, 2); + + d2 = (trim_regs[5] & 0xFE) >> 1; + if (trim_regs[5] & 0x01) + d2 = -d2; + + d2 += temp; + break; + default: + /* No data for other channels */ + continue; + } + + twl6030_calibrate_channel(gpadc, chn, d1, d2); + } + + return 0; +} + +#define TWL6030_GPADC_CHAN(chn, _type, chan_info) { \ + .type = _type, \ + .channel = chn, \ + .info_mask_separate = BIT(chan_info), \ + .indexed = 1, \ +} + +static const struct iio_chan_spec twl6030_gpadc_iio_channels[] = { + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), +}; + +static const struct iio_chan_spec twl6032_gpadc_iio_channels[] = { + TWL6030_GPADC_CHAN(0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(1, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(3, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(4, IIO_TEMP, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), + TWL6030_GPADC_CHAN(17, IIO_VOLTAGE, IIO_CHAN_INFO_RAW), + TWL6030_GPADC_CHAN(18, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED), +}; + +static const struct iio_info twl6030_gpadc_iio_info = { + .read_raw = &twl6030_gpadc_read_raw, + .driver_module = THIS_MODULE, +}; + +static const struct twl6030_gpadc_platform_data twl6030_pdata = { + .iio_channels = twl6030_gpadc_iio_channels, + .nchannels = TWL6030_GPADC_USED_CHANNELS, + .ideal = twl6030_ideal, + .start_conversion = twl6030_start_conversion, + .channel_to_reg = twl6030_channel_to_reg, + .calibrate = twl6030_calibration, +}; + +static const struct twl6030_gpadc_platform_data twl6032_pdata = { + .iio_channels = twl6032_gpadc_iio_channels, + .nchannels = TWL6032_GPADC_USED_CHANNELS, + .ideal = twl6032_ideal, + .start_conversion = twl6032_start_conversion, + .channel_to_reg = twl6032_channel_to_reg, + .calibrate = twl6032_calibration, +}; + +static const struct of_device_id of_twl6030_match_tbl[] = { + { + .compatible = "ti,twl6030-gpadc", + .data = &twl6030_pdata, + }, + { + .compatible = "ti,twl6032-gpadc", + .data = &twl6032_pdata, + }, + { /* end */ } +}; + +static int twl6030_gpadc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct twl6030_gpadc_data *gpadc; + const struct twl6030_gpadc_platform_data *pdata; + const struct of_device_id *match; + struct iio_dev *indio_dev; + int irq; + int ret; + + match = of_match_device(of_twl6030_match_tbl, dev); + if (!match) + return -EINVAL; + + pdata = match->data; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc)); + if (!indio_dev) + return -ENOMEM; + + gpadc = iio_priv(indio_dev); + + gpadc->twl6030_cal_tbl = devm_kzalloc(dev, + sizeof(*gpadc->twl6030_cal_tbl) * + pdata->nchannels, GFP_KERNEL); + if (!gpadc->twl6030_cal_tbl) + return -ENOMEM; + + gpadc->dev = dev; + gpadc->pdata = pdata; + + platform_set_drvdata(pdev, indio_dev); + mutex_init(&gpadc->lock); + init_completion(&gpadc->irq_complete); + + ret = pdata->calibrate(gpadc); + if (ret < 0) { + dev_err(&pdev->dev, "failed to read calibration registers\n"); + return ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get irq\n"); + return irq; + } + + ret = devm_request_threaded_irq(dev, irq, NULL, + twl6030_gpadc_irq_handler, + IRQF_ONESHOT, "twl6030_gpadc", indio_dev); + + ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable GPADC interrupt\n"); + return ret; + } + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, + TWL6030_REG_TOGGLE1); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable GPADC module\n"); + return ret; + } + + indio_dev->name = DRIVER_NAME; + indio_dev->dev.parent = dev; + indio_dev->info = &twl6030_gpadc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = pdata->iio_channels; + indio_dev->num_channels = pdata->nchannels; + + return iio_device_register(indio_dev); +} + +static int twl6030_gpadc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + twl6030_gpadc_disable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK); + iio_device_unregister(indio_dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int twl6030_gpadc_suspend(struct device *pdev) +{ + int ret; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR, + TWL6030_REG_TOGGLE1); + if (ret) + dev_err(pdev, "error resetting GPADC (%d)!\n", ret); + + return 0; +}; + +static int twl6030_gpadc_resume(struct device *pdev) +{ + int ret; + + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS, + TWL6030_REG_TOGGLE1); + if (ret) + dev_err(pdev, "error setting GPADC (%d)!\n", ret); + + return 0; +}; +#endif + +static SIMPLE_DEV_PM_OPS(twl6030_gpadc_pm_ops, twl6030_gpadc_suspend, + twl6030_gpadc_resume); + +static struct platform_driver twl6030_gpadc_driver = { + .probe = twl6030_gpadc_probe, + .remove = twl6030_gpadc_remove, + .driver = { + .name = DRIVER_NAME, + .pm = &twl6030_gpadc_pm_ops, + .of_match_table = of_twl6030_match_tbl, + }, +}; + +module_platform_driver(twl6030_gpadc_driver); + +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Balaji T K "); +MODULE_AUTHOR("Graeme Gregory "); +MODULE_AUTHOR("Oleksandr Kozaruk