From e5fd91f1ef340da553f7a79da9540c3db711c937 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 8 Sep 2015 01:01:14 -0300 Subject: Linux-libre 4.2-gnu --- drivers/iio/adc/Kconfig | 11 +- drivers/iio/adc/Makefile | 1 + drivers/iio/adc/axp288_adc.c | 2 +- drivers/iio/adc/berlin2-adc.c | 378 ++++++++++++++++++++++++++++++++++++++++ drivers/iio/adc/mcp320x.c | 2 + drivers/iio/adc/ti-adc128s052.c | 30 +++- drivers/iio/adc/ti_am335x_adc.c | 83 +++++++-- drivers/iio/adc/twl4030-madc.c | 8 +- drivers/iio/adc/vf610_adc.c | 148 +++++++++++----- 9 files changed, 590 insertions(+), 73 deletions(-) create mode 100644 drivers/iio/adc/berlin2-adc.c (limited to 'drivers/iio/adc') diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 1bcb65b8d..eb0cd8977 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -135,6 +135,13 @@ config AXP288_ADC device. Depending on platform configuration, this general purpose ADC can be used for sampling sensors such as thermal resistors. +config BERLIN2_ADC + tristate "Marvell Berlin2 ADC driver" + depends on ARCH_BERLIN + help + Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for + temperature measurement. + config DA9150_GPADC tristate "Dialog DA9150 GPADC driver support" depends on MFD_DA9150 @@ -284,11 +291,11 @@ config TI_ADC081C called ti-adc081c. config TI_ADC128S052 - tristate "Texas Instruments ADC128S052" + tristate "Texas Instruments ADC128S052/ADC122S021" depends on SPI help If you say yes here you get support for Texas Instruments ADC128S052 - chip. + and ADC122S021 chips. This driver can also be built as a module. If so, the module will be called ti-adc128s052. diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 3930e63e8..a0962103e 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o obj-$(CONFIG_AXP288_ADC) += axp288_adc.o +obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 56008a86b..0c904edd6 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -238,7 +238,7 @@ static int axp288_adc_remove(struct platform_device *pdev) return 0; } -static struct platform_device_id axp288_adc_id_table[] = { +static const struct platform_device_id axp288_adc_id_table[] = { { .name = "axp288_adc" }, {}, }; diff --git a/drivers/iio/adc/berlin2-adc.c b/drivers/iio/adc/berlin2-adc.c new file mode 100644 index 000000000..aecc9ad99 --- /dev/null +++ b/drivers/iio/adc/berlin2-adc.c @@ -0,0 +1,378 @@ +/* + * Marvell Berlin2 ADC driver + * + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Antoine Tenart + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BERLIN2_SM_CTRL 0x14 +#define BERLIN2_SM_CTRL_SM_SOC_INT BIT(1) +#define BERLIN2_SM_CTRL_SOC_SM_INT BIT(2) +#define BERLIN2_SM_CTRL_ADC_SEL(x) (BIT(x) << 5) /* 0-15 */ +#define BERLIN2_SM_CTRL_ADC_SEL_MASK (0xf << 5) +#define BERLIN2_SM_CTRL_ADC_POWER BIT(9) +#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV2 (0x0 << 10) +#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV3 (0x1 << 10) +#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV4 (0x2 << 10) +#define BERLIN2_SM_CTRL_ADC_CLKSEL_DIV8 (0x3 << 10) +#define BERLIN2_SM_CTRL_ADC_CLKSEL_MASK (0x3 << 10) +#define BERLIN2_SM_CTRL_ADC_START BIT(12) +#define BERLIN2_SM_CTRL_ADC_RESET BIT(13) +#define BERLIN2_SM_CTRL_ADC_BANDGAP_RDY BIT(14) +#define BERLIN2_SM_CTRL_ADC_CONT_SINGLE (0x0 << 15) +#define BERLIN2_SM_CTRL_ADC_CONT_CONTINUOUS (0x1 << 15) +#define BERLIN2_SM_CTRL_ADC_BUFFER_EN BIT(16) +#define BERLIN2_SM_CTRL_ADC_VREF_EXT (0x0 << 17) +#define BERLIN2_SM_CTRL_ADC_VREF_INT (0x1 << 17) +#define BERLIN2_SM_CTRL_ADC_ROTATE BIT(19) +#define BERLIN2_SM_CTRL_TSEN_EN BIT(20) +#define BERLIN2_SM_CTRL_TSEN_CLK_SEL_125 (0x0 << 21) /* 1.25 MHz */ +#define BERLIN2_SM_CTRL_TSEN_CLK_SEL_250 (0x1 << 21) /* 2.5 MHz */ +#define BERLIN2_SM_CTRL_TSEN_MODE_0_125 (0x0 << 22) /* 0-125 C */ +#define BERLIN2_SM_CTRL_TSEN_MODE_10_50 (0x1 << 22) /* 10-50 C */ +#define BERLIN2_SM_CTRL_TSEN_RESET BIT(29) +#define BERLIN2_SM_ADC_DATA 0x20 +#define BERLIN2_SM_ADC_MASK 0x3ff +#define BERLIN2_SM_ADC_STATUS 0x1c +#define BERLIN2_SM_ADC_STATUS_DATA_RDY(x) BIT(x) /* 0-15 */ +#define BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK 0xf +#define BERLIN2_SM_ADC_STATUS_INT_EN(x) (BIT(x) << 16) /* 0-15 */ +#define BERLIN2_SM_ADC_STATUS_INT_EN_MASK (0xf << 16) +#define BERLIN2_SM_TSEN_STATUS 0x24 +#define BERLIN2_SM_TSEN_STATUS_DATA_RDY BIT(0) +#define BERLIN2_SM_TSEN_STATUS_INT_EN BIT(1) +#define BERLIN2_SM_TSEN_DATA 0x28 +#define BERLIN2_SM_TSEN_MASK 0xfff +#define BERLIN2_SM_TSEN_CTRL 0x74 +#define BERLIN2_SM_TSEN_CTRL_START BIT(8) +#define BERLIN2_SM_TSEN_CTRL_SETTLING_4 (0x0 << 21) /* 4 us */ +#define BERLIN2_SM_TSEN_CTRL_SETTLING_12 (0x1 << 21) /* 12 us */ +#define BERLIN2_SM_TSEN_CTRL_SETTLING_MASK (0x1 << 21) +#define BERLIN2_SM_TSEN_CTRL_TRIM(x) ((x) << 22) +#define BERLIN2_SM_TSEN_CTRL_TRIM_MASK (0xf << 22) + +struct berlin2_adc_priv { + struct regmap *regmap; + struct mutex lock; + wait_queue_head_t wq; + bool data_available; + int data; +}; + +#define BERLIN2_ADC_CHANNEL(n, t) \ + { \ + .channel = n, \ + .datasheet_name = "channel"#n, \ + .type = t, \ + .indexed = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + } + +static struct iio_chan_spec berlin2_adc_channels[] = { + BERLIN2_ADC_CHANNEL(0, IIO_VOLTAGE), /* external input */ + BERLIN2_ADC_CHANNEL(1, IIO_VOLTAGE), /* external input */ + BERLIN2_ADC_CHANNEL(2, IIO_VOLTAGE), /* external input */ + BERLIN2_ADC_CHANNEL(3, IIO_VOLTAGE), /* external input */ + BERLIN2_ADC_CHANNEL(4, IIO_VOLTAGE), /* reserved */ + BERLIN2_ADC_CHANNEL(5, IIO_VOLTAGE), /* reserved */ + { /* temperature sensor */ + .channel = 6, + .datasheet_name = "channel6", + .type = IIO_TEMP, + .indexed = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + }, + BERLIN2_ADC_CHANNEL(7, IIO_VOLTAGE), /* reserved */ + IIO_CHAN_SOFT_TIMESTAMP(8), /* timestamp */ +}; +#define BERLIN2_N_CHANNELS ARRAY_SIZE(berlin2_adc_channels) + +static int berlin2_adc_read(struct iio_dev *indio_dev, int channel) +{ + struct berlin2_adc_priv *priv = iio_priv(indio_dev); + int data, ret; + + mutex_lock(&priv->lock); + + /* Configure the ADC */ + regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL, + BERLIN2_SM_CTRL_ADC_RESET | BERLIN2_SM_CTRL_ADC_SEL_MASK + | BERLIN2_SM_CTRL_ADC_START, + BERLIN2_SM_CTRL_ADC_SEL(channel) | BERLIN2_SM_CTRL_ADC_START); + + ret = wait_event_interruptible_timeout(priv->wq, priv->data_available, + msecs_to_jiffies(1000)); + + /* Disable the interrupts */ + regmap_update_bits(priv->regmap, BERLIN2_SM_ADC_STATUS, + BERLIN2_SM_ADC_STATUS_INT_EN(channel), 0); + + if (ret == 0) + ret = -ETIMEDOUT; + if (ret < 0) { + mutex_unlock(&priv->lock); + return ret; + } + + regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL, + BERLIN2_SM_CTRL_ADC_START, 0); + + data = priv->data; + priv->data_available = false; + + mutex_unlock(&priv->lock); + + return data; +} + +static int berlin2_adc_tsen_read(struct iio_dev *indio_dev) +{ + struct berlin2_adc_priv *priv = iio_priv(indio_dev); + int data, ret; + + mutex_lock(&priv->lock); + + /* Configure the ADC */ + regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL, + BERLIN2_SM_CTRL_TSEN_RESET | BERLIN2_SM_CTRL_ADC_ROTATE, + BERLIN2_SM_CTRL_ADC_ROTATE); + + /* Configure the temperature sensor */ + regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL, + BERLIN2_SM_TSEN_CTRL_TRIM_MASK | BERLIN2_SM_TSEN_CTRL_SETTLING_MASK + | BERLIN2_SM_TSEN_CTRL_START, + BERLIN2_SM_TSEN_CTRL_TRIM(3) | BERLIN2_SM_TSEN_CTRL_SETTLING_12 + | BERLIN2_SM_TSEN_CTRL_START); + + ret = wait_event_interruptible_timeout(priv->wq, priv->data_available, + msecs_to_jiffies(1000)); + + /* Disable interrupts */ + regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_STATUS, + BERLIN2_SM_TSEN_STATUS_INT_EN, 0); + + if (ret == 0) + ret = -ETIMEDOUT; + if (ret < 0) { + mutex_unlock(&priv->lock); + return ret; + } + + regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL, + BERLIN2_SM_TSEN_CTRL_START, 0); + + data = priv->data; + priv->data_available = false; + + mutex_unlock(&priv->lock); + + return data; +} + +static int berlin2_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, + long mask) +{ + struct berlin2_adc_priv *priv = iio_priv(indio_dev); + int temp; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type != IIO_VOLTAGE) + return -EINVAL; + + /* Enable the interrupts */ + regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS, + BERLIN2_SM_ADC_STATUS_INT_EN(chan->channel)); + + *val = berlin2_adc_read(indio_dev, chan->channel); + if (*val < 0) + return *val; + + return IIO_VAL_INT; + case IIO_CHAN_INFO_PROCESSED: + if (chan->type != IIO_TEMP) + return -EINVAL; + + /* Enable interrupts */ + regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS, + BERLIN2_SM_TSEN_STATUS_INT_EN); + + temp = berlin2_adc_tsen_read(indio_dev); + if (temp < 0) + return temp; + + if (temp > 2047) + temp = -(4096 - temp); + + /* Convert to milli Celsius */ + *val = ((temp * 100000) / 264 - 270000); + return IIO_VAL_INT; + default: + break; + } + + return -EINVAL; +} + +static irqreturn_t berlin2_adc_irq(int irq, void *private) +{ + struct berlin2_adc_priv *priv = iio_priv(private); + unsigned val; + + regmap_read(priv->regmap, BERLIN2_SM_ADC_STATUS, &val); + if (val & BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK) { + regmap_read(priv->regmap, BERLIN2_SM_ADC_DATA, &priv->data); + priv->data &= BERLIN2_SM_ADC_MASK; + + val &= ~BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK; + regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS, val); + + priv->data_available = true; + wake_up_interruptible(&priv->wq); + } + + return IRQ_HANDLED; +} + +static irqreturn_t berlin2_adc_tsen_irq(int irq, void *private) +{ + struct berlin2_adc_priv *priv = iio_priv(private); + unsigned val; + + regmap_read(priv->regmap, BERLIN2_SM_TSEN_STATUS, &val); + if (val & BERLIN2_SM_TSEN_STATUS_DATA_RDY) { + regmap_read(priv->regmap, BERLIN2_SM_TSEN_DATA, &priv->data); + priv->data &= BERLIN2_SM_TSEN_MASK; + + val &= ~BERLIN2_SM_TSEN_STATUS_DATA_RDY; + regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS, val); + + priv->data_available = true; + wake_up_interruptible(&priv->wq); + } + + return IRQ_HANDLED; +} + +static const struct iio_info berlin2_adc_info = { + .driver_module = THIS_MODULE, + .read_raw = berlin2_adc_read_raw, +}; + +static int berlin2_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct berlin2_adc_priv *priv; + struct device_node *parent_np = of_get_parent(pdev->dev.of_node); + int irq, tsen_irq; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, + sizeof(struct berlin2_adc_priv)); + if (!indio_dev) + return -ENOMEM; + + priv = iio_priv(indio_dev); + platform_set_drvdata(pdev, indio_dev); + + priv->regmap = syscon_node_to_regmap(parent_np); + of_node_put(parent_np); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + irq = platform_get_irq_byname(pdev, "adc"); + if (irq < 0) + return -ENODEV; + + tsen_irq = platform_get_irq_byname(pdev, "tsen"); + if (tsen_irq < 0) + return -ENODEV; + + ret = devm_request_irq(&pdev->dev, irq, berlin2_adc_irq, 0, + pdev->dev.driver->name, indio_dev); + if (ret) + return ret; + + ret = devm_request_irq(&pdev->dev, tsen_irq, berlin2_adc_tsen_irq, + 0, pdev->dev.driver->name, indio_dev); + if (ret) + return ret; + + init_waitqueue_head(&priv->wq); + mutex_init(&priv->lock); + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = dev_name(&pdev->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &berlin2_adc_info; + + indio_dev->num_channels = BERLIN2_N_CHANNELS; + indio_dev->channels = berlin2_adc_channels; + + /* Power up the ADC */ + regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL, + BERLIN2_SM_CTRL_ADC_POWER, BERLIN2_SM_CTRL_ADC_POWER); + + ret = iio_device_register(indio_dev); + if (ret) { + /* Power down the ADC */ + regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL, + BERLIN2_SM_CTRL_ADC_POWER, 0); + return ret; + } + + return 0; +} + +static int berlin2_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct berlin2_adc_priv *priv = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + /* Power down the ADC */ + regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL, + BERLIN2_SM_CTRL_ADC_POWER, 0); + + return 0; +} + +static const struct of_device_id berlin2_adc_match[] = { + { .compatible = "marvell,berlin2-adc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, berlin2_adc_match); + +static struct platform_driver berlin2_adc_driver = { + .driver = { + .name = "berlin2-adc", + .of_match_table = berlin2_adc_match, + }, + .probe = berlin2_adc_probe, + .remove = berlin2_adc_remove, +}; +module_platform_driver(berlin2_adc_driver); + +MODULE_AUTHOR("Antoine Tenart "); +MODULE_DESCRIPTION("Marvell Berlin2 ADC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index 8d9c9b921..d819823f7 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -299,6 +299,8 @@ static int mcp320x_probe(struct spi_device *spi) indio_dev->channels = chip_info->channels; indio_dev->num_channels = chip_info->num_channels; + adc->chip_info = chip_info; + adc->transfer[0].tx_buf = &adc->tx_buf; adc->transfer[0].len = sizeof(adc->tx_buf); adc->transfer[1].rx_buf = adc->rx_buf; diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c index 655cb564e..915be6b60 100644 --- a/drivers/iio/adc/ti-adc128s052.c +++ b/drivers/iio/adc/ti-adc128s052.c @@ -1,9 +1,10 @@ /* * Copyright (C) 2014 Angelo Compagnucci * - * Driver for Texas Instruments' ADC128S052 ADC chip. - * Datasheet can be found here: + * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip. + * Datasheets can be found here: * http://www.ti.com/lit/ds/symlink/adc128s052.pdf + * http://www.ti.com/lit/ds/symlink/adc122s021.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,6 +17,11 @@ #include #include +struct adc128_configuration { + const struct iio_chan_spec *channels; + u8 num_channels; +}; + struct adc128 { struct spi_device *spi; @@ -92,7 +98,7 @@ static int adc128_read_raw(struct iio_dev *indio_dev, .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } -static const struct iio_chan_spec adc128_channels[] = { +static const struct iio_chan_spec adc128s052_channels[] = { ADC128_VOLTAGE_CHANNEL(0), ADC128_VOLTAGE_CHANNEL(1), ADC128_VOLTAGE_CHANNEL(2), @@ -103,6 +109,16 @@ static const struct iio_chan_spec adc128_channels[] = { ADC128_VOLTAGE_CHANNEL(7), }; +static const struct iio_chan_spec adc122s021_channels[] = { + ADC128_VOLTAGE_CHANNEL(0), + ADC128_VOLTAGE_CHANNEL(1), +}; + +static const struct adc128_configuration adc128_config[] = { + { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) }, + { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) }, +}; + static const struct iio_info adc128_info = { .read_raw = adc128_read_raw, .driver_module = THIS_MODULE, @@ -112,6 +128,7 @@ static int adc128_probe(struct spi_device *spi) { struct iio_dev *indio_dev; struct adc128 *adc; + int config = spi_get_device_id(spi)->driver_data; int ret; indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); @@ -128,8 +145,8 @@ static int adc128_probe(struct spi_device *spi) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &adc128_info; - indio_dev->channels = adc128_channels; - indio_dev->num_channels = ARRAY_SIZE(adc128_channels); + indio_dev->channels = adc128_config[config].channels; + indio_dev->num_channels = adc128_config[config].num_channels; adc->reg = devm_regulator_get(&spi->dev, "vref"); if (IS_ERR(adc->reg)) @@ -158,7 +175,8 @@ static int adc128_remove(struct spi_device *spi) } static const struct spi_device_id adc128_id[] = { - { "adc128s052", 0}, + { "adc128s052", 0}, /* index into adc128_config */ + { "adc122s021", 1}, { } }; MODULE_DEVICE_TABLE(spi, adc128_id); diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index a0e7161f0..942320e32 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -37,6 +37,7 @@ struct tiadc_device { u8 channel_step[8]; int buffer_en_ch_steps; u16 data[8]; + u32 open_delay[8], sample_delay[8], step_avg[8]; }; static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg) @@ -85,6 +86,7 @@ static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan) static void tiadc_step_config(struct iio_dev *indio_dev) { struct tiadc_device *adc_dev = iio_priv(indio_dev); + struct device *dev = adc_dev->mfd_tscadc->dev; unsigned int stepconfig; int i, steps = 0; @@ -98,20 +100,47 @@ static void tiadc_step_config(struct iio_dev *indio_dev) * needs to be given to ADC to digitalize data. */ - if (iio_buffer_enabled(indio_dev)) - stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1 - | STEPCONFIG_MODE_SWCNT; - else - stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1; for (i = 0; i < adc_dev->channels; i++) { int chan; chan = adc_dev->channel_line[i]; + + if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) { + dev_warn(dev, "chan %d step_avg truncating to %d\n", + chan, STEPCONFIG_AVG_16); + adc_dev->step_avg[i] = STEPCONFIG_AVG_16; + } + + if (adc_dev->step_avg[i]) + stepconfig = + STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) | + STEPCONFIG_FIFO1; + else + stepconfig = STEPCONFIG_FIFO1; + + if (iio_buffer_enabled(indio_dev)) + stepconfig |= STEPCONFIG_MODE_SWCNT; + tiadc_writel(adc_dev, REG_STEPCONFIG(steps), stepconfig | STEPCONFIG_INP(chan)); + + if (adc_dev->open_delay[i] > STEPDELAY_OPEN_MASK) { + dev_warn(dev, "chan %d open delay truncating to 0x3FFFF\n", + chan); + adc_dev->open_delay[i] = STEPDELAY_OPEN_MASK; + } + + if (adc_dev->sample_delay[i] > 0xFF) { + dev_warn(dev, "chan %d sample delay truncating to 0xFF\n", + chan); + adc_dev->sample_delay[i] = 0xFF; + } + tiadc_writel(adc_dev, REG_STEPDELAY(steps), - STEPCONFIG_OPENDLY); + STEPDELAY_OPEN(adc_dev->open_delay[i]) | + STEPDELAY_SAMPLE(adc_dev->sample_delay[i])); + adc_dev->channel_step[i] = steps; steps++; } @@ -395,16 +424,43 @@ static const struct iio_info tiadc_info = { .driver_module = THIS_MODULE, }; +static int tiadc_parse_dt(struct platform_device *pdev, + struct tiadc_device *adc_dev) +{ + struct device_node *node = pdev->dev.of_node; + struct property *prop; + const __be32 *cur; + int channels = 0; + u32 val; + + of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) { + adc_dev->channel_line[channels] = val; + + /* Set Default values for optional DT parameters */ + adc_dev->open_delay[channels] = STEPCONFIG_OPENDLY; + adc_dev->sample_delay[channels] = STEPCONFIG_SAMPLEDLY; + adc_dev->step_avg[channels] = 16; + + channels++; + } + + of_property_read_u32_array(node, "ti,chan-step-avg", + adc_dev->step_avg, channels); + of_property_read_u32_array(node, "ti,chan-step-opendelay", + adc_dev->open_delay, channels); + of_property_read_u32_array(node, "ti,chan-step-sampledelay", + adc_dev->sample_delay, channels); + + adc_dev->channels = channels; + return 0; +} + static int tiadc_probe(struct platform_device *pdev) { struct iio_dev *indio_dev; struct tiadc_device *adc_dev; struct device_node *node = pdev->dev.of_node; - struct property *prop; - const __be32 *cur; int err; - u32 val; - int channels = 0; if (!node) { dev_err(&pdev->dev, "Could not find valid DT data.\n"); @@ -420,12 +476,7 @@ static int tiadc_probe(struct platform_device *pdev) adc_dev = iio_priv(indio_dev); adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev); - - of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) { - adc_dev->channel_line[channels] = val; - channels++; - } - adc_dev->channels = channels; + tiadc_parse_dt(pdev, adc_dev); indio_dev->dev.parent = &pdev->dev; indio_dev->name = dev_name(&pdev->dev); diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index 4caecbea4..ebe415f10 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -235,7 +235,7 @@ static int twl4030battery_temperature(int raw_volt) if (ret < 0) return ret; - curr = ((val & TWL4030_BCI_ITHEN) + 1) * 10; + curr = ((val & TWL4030_BCI_ITHSENS) + 1) * 10; /* Getting and calculating the thermistor resistance in ohms */ res = volt * 1000 / curr; /* calculating temperature */ @@ -662,10 +662,8 @@ EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion); * * @madc: pointer to twl4030_madc_data struct * @chan: can be one of the two values: - * TWL4030_BCI_ITHEN - * Enables bias current for main battery type reading - * TWL4030_BCI_TYPEN - * Enables bias current for main battery temperature sensing + * 0 - Enables bias current for main battery type reading + * 1 - Enables bias current for main battery temperature sensing * @on: enable or disable chan. * * Function to enable or disable bias current for diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c index 56292ae45..819632bf1 100644 --- a/drivers/iio/adc/vf610_adc.c +++ b/drivers/iio/adc/vf610_adc.c @@ -118,15 +118,21 @@ enum average_sel { VF610_ADC_SAMPLE_32, }; +enum conversion_mode_sel { + VF610_ADC_CONV_NORMAL, + VF610_ADC_CONV_HIGH_SPEED, + VF610_ADC_CONV_LOW_POWER, +}; + struct vf610_adc_feature { enum clk_sel clk_sel; enum vol_ref vol_ref; + enum conversion_mode_sel conv_mode; int clk_div; int sample_rate; int res_mode; - bool lpm; bool calibration; bool ovwren; }; @@ -139,6 +145,8 @@ struct vf610_adc { u32 vref_uv; u32 value; struct regulator *vref; + + u32 max_adck_rate[3]; struct vf610_adc_feature adc_feature; u32 sample_freq_avail[5]; @@ -148,46 +156,22 @@ struct vf610_adc { static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 }; -#define VF610_ADC_CHAN(_idx, _chan_type) { \ - .type = (_chan_type), \ - .indexed = 1, \ - .channel = (_idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ - BIT(IIO_CHAN_INFO_SAMP_FREQ), \ -} - -#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \ - .type = (_chan_type), \ - .channel = (_idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ -} - -static const struct iio_chan_spec vf610_adc_iio_channels[] = { - VF610_ADC_CHAN(0, IIO_VOLTAGE), - VF610_ADC_CHAN(1, IIO_VOLTAGE), - VF610_ADC_CHAN(2, IIO_VOLTAGE), - VF610_ADC_CHAN(3, IIO_VOLTAGE), - VF610_ADC_CHAN(4, IIO_VOLTAGE), - VF610_ADC_CHAN(5, IIO_VOLTAGE), - VF610_ADC_CHAN(6, IIO_VOLTAGE), - VF610_ADC_CHAN(7, IIO_VOLTAGE), - VF610_ADC_CHAN(8, IIO_VOLTAGE), - VF610_ADC_CHAN(9, IIO_VOLTAGE), - VF610_ADC_CHAN(10, IIO_VOLTAGE), - VF610_ADC_CHAN(11, IIO_VOLTAGE), - VF610_ADC_CHAN(12, IIO_VOLTAGE), - VF610_ADC_CHAN(13, IIO_VOLTAGE), - VF610_ADC_CHAN(14, IIO_VOLTAGE), - VF610_ADC_CHAN(15, IIO_VOLTAGE), - VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP), - /* sentinel */ -}; - static inline void vf610_adc_calculate_rates(struct vf610_adc *info) { + struct vf610_adc_feature *adc_feature = &info->adc_feature; unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk); - int i; + int divisor, i; + + adck_rate = info->max_adck_rate[adc_feature->conv_mode]; + + if (adck_rate) { + /* calculate clk divider which is within specification */ + divisor = ipg_rate / adck_rate; + adc_feature->clk_div = 1 << fls(divisor + 1); + } else { + /* fall-back value using a safe divisor */ + adc_feature->clk_div = 8; + } /* * Calculate ADC sample frequencies @@ -219,10 +203,8 @@ static inline void vf610_adc_cfg_init(struct vf610_adc *info) adc_feature->res_mode = 12; adc_feature->sample_rate = 1; - adc_feature->lpm = true; - /* Use a save ADCK which is below 20MHz on all devices */ - adc_feature->clk_div = 8; + adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER; vf610_adc_calculate_rates(info); } @@ -304,10 +286,12 @@ static void vf610_adc_cfg_set(struct vf610_adc *info) cfg_data = readl(info->regs + VF610_REG_ADC_CFG); cfg_data &= ~VF610_ADC_ADLPC_EN; - if (adc_feature->lpm) + if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER) cfg_data |= VF610_ADC_ADLPC_EN; cfg_data &= ~VF610_ADC_ADHSC_EN; + if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED) + cfg_data |= VF610_ADC_ADHSC_EN; writel(cfg_data, info->regs + VF610_REG_ADC_CFG); } @@ -409,6 +393,81 @@ static void vf610_adc_hw_init(struct vf610_adc *info) vf610_adc_cfg_set(info); } +static int vf610_set_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + unsigned int mode) +{ + struct vf610_adc *info = iio_priv(indio_dev); + + mutex_lock(&indio_dev->mlock); + info->adc_feature.conv_mode = mode; + vf610_adc_calculate_rates(info); + vf610_adc_hw_init(info); + mutex_unlock(&indio_dev->mlock); + + return 0; +} + +static int vf610_get_conversion_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct vf610_adc *info = iio_priv(indio_dev); + + return info->adc_feature.conv_mode; +} + +static const char * const vf610_conv_modes[] = { "normal", "high-speed", + "low-power" }; + +static const struct iio_enum vf610_conversion_mode = { + .items = vf610_conv_modes, + .num_items = ARRAY_SIZE(vf610_conv_modes), + .get = vf610_get_conversion_mode, + .set = vf610_set_conversion_mode, +}; + +static const struct iio_chan_spec_ext_info vf610_ext_info[] = { + IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode), + {}, +}; + +#define VF610_ADC_CHAN(_idx, _chan_type) { \ + .type = (_chan_type), \ + .indexed = 1, \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .ext_info = vf610_ext_info, \ +} + +#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \ + .type = (_chan_type), \ + .channel = (_idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ +} + +static const struct iio_chan_spec vf610_adc_iio_channels[] = { + VF610_ADC_CHAN(0, IIO_VOLTAGE), + VF610_ADC_CHAN(1, IIO_VOLTAGE), + VF610_ADC_CHAN(2, IIO_VOLTAGE), + VF610_ADC_CHAN(3, IIO_VOLTAGE), + VF610_ADC_CHAN(4, IIO_VOLTAGE), + VF610_ADC_CHAN(5, IIO_VOLTAGE), + VF610_ADC_CHAN(6, IIO_VOLTAGE), + VF610_ADC_CHAN(7, IIO_VOLTAGE), + VF610_ADC_CHAN(8, IIO_VOLTAGE), + VF610_ADC_CHAN(9, IIO_VOLTAGE), + VF610_ADC_CHAN(10, IIO_VOLTAGE), + VF610_ADC_CHAN(11, IIO_VOLTAGE), + VF610_ADC_CHAN(12, IIO_VOLTAGE), + VF610_ADC_CHAN(13, IIO_VOLTAGE), + VF610_ADC_CHAN(14, IIO_VOLTAGE), + VF610_ADC_CHAN(15, IIO_VOLTAGE), + VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP), + /* sentinel */ +}; + static int vf610_adc_read_data(struct vf610_adc *info) { int result; @@ -576,7 +635,7 @@ static int vf610_adc_reg_access(struct iio_dev *indio_dev, struct vf610_adc *info = iio_priv(indio_dev); if ((readval == NULL) || - (!(reg % 4) || (reg > VF610_REG_ADC_PCTL))) + ((reg % 4) || (reg > VF610_REG_ADC_PCTL))) return -EINVAL; *readval = readl(info->regs + reg); @@ -651,6 +710,9 @@ static int vf610_adc_probe(struct platform_device *pdev) info->vref_uv = regulator_get_voltage(info->vref); + of_property_read_u32_array(pdev->dev.of_node, "fsl,adck-max-frequency", + info->max_adck_rate, 3); + platform_set_drvdata(pdev, indio_dev); init_completion(&info->completion); -- cgit v1.2.3-54-g00ecf