From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/input/touchscreen/inexio.c | 191 +++++++++++++++++++++++++++++++++++++ 1 file changed, 191 insertions(+) create mode 100644 drivers/input/touchscreen/inexio.c (limited to 'drivers/input/touchscreen/inexio.c') diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c new file mode 100644 index 000000000..adb80b65a --- /dev/null +++ b/drivers/input/touchscreen/inexio.c @@ -0,0 +1,191 @@ +/* + * iNexio serial touchscreen driver + * + * Copyright (c) 2008 Richard Lemon + * Based on the mtouch driver (c) Vojtech Pavlik and Dan Streetman + * + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/* + * 2008/06/19 Richard Lemon + * Copied mtouch.c and edited for iNexio protocol + */ + +#include +#include +#include +#include +#include +#include + +#define DRIVER_DESC "iNexio serial touchscreen driver" + +MODULE_AUTHOR("Richard Lemon "); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define INEXIO_FORMAT_TOUCH_BIT 0x01 +#define INEXIO_FORMAT_LENGTH 5 +#define INEXIO_RESPONSE_BEGIN_BYTE 0x80 + +/* todo: check specs for max length of all responses */ +#define INEXIO_MAX_LENGTH 16 + +#define INEXIO_MIN_XC 0 +#define INEXIO_MAX_XC 0x3fff +#define INEXIO_MIN_YC 0 +#define INEXIO_MAX_YC 0x3fff + +#define INEXIO_GET_XC(data) (((data[1])<<7) | data[2]) +#define INEXIO_GET_YC(data) (((data[3])<<7) | data[4]) +#define INEXIO_GET_TOUCHED(data) (INEXIO_FORMAT_TOUCH_BIT & data[0]) + +/* + * Per-touchscreen data. + */ + +struct inexio { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[INEXIO_MAX_LENGTH]; + char phys[32]; +}; + +static void inexio_process_data(struct inexio *pinexio) +{ + struct input_dev *dev = pinexio->dev; + + if (INEXIO_FORMAT_LENGTH == ++pinexio->idx) { + input_report_abs(dev, ABS_X, INEXIO_GET_XC(pinexio->data)); + input_report_abs(dev, ABS_Y, INEXIO_GET_YC(pinexio->data)); + input_report_key(dev, BTN_TOUCH, INEXIO_GET_TOUCHED(pinexio->data)); + input_sync(dev); + + pinexio->idx = 0; + } +} + +static irqreturn_t inexio_interrupt(struct serio *serio, + unsigned char data, unsigned int flags) +{ + struct inexio* pinexio = serio_get_drvdata(serio); + + pinexio->data[pinexio->idx] = data; + + if (INEXIO_RESPONSE_BEGIN_BYTE&pinexio->data[0]) + inexio_process_data(pinexio); + else + printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]); + + return IRQ_HANDLED; +} + +/* + * inexio_disconnect() is the opposite of inexio_connect() + */ + +static void inexio_disconnect(struct serio *serio) +{ + struct inexio* pinexio = serio_get_drvdata(serio); + + input_get_device(pinexio->dev); + input_unregister_device(pinexio->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(pinexio->dev); + kfree(pinexio); +} + +/* + * inexio_connect() is the routine that is called when someone adds a + * new serio device that supports iNexio protocol and registers it as + * an input device. This is usually accomplished using inputattach. + */ + +static int inexio_connect(struct serio *serio, struct serio_driver *drv) +{ + struct inexio *pinexio; + struct input_dev *input_dev; + int err; + + pinexio = kzalloc(sizeof(struct inexio), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pinexio || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pinexio->serio = serio; + pinexio->dev = input_dev; + snprintf(pinexio->phys, sizeof(pinexio->phys), "%s/input0", serio->phys); + + input_dev->name = "iNexio Serial TouchScreen"; + input_dev->phys = pinexio->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_INEXIO; + input_dev->id.product = 0; + input_dev->id.version = 0x0001; + input_dev->dev.parent = &serio->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + input_set_abs_params(pinexio->dev, ABS_X, INEXIO_MIN_XC, INEXIO_MAX_XC, 0, 0); + input_set_abs_params(pinexio->dev, ABS_Y, INEXIO_MIN_YC, INEXIO_MAX_YC, 0, 0); + + serio_set_drvdata(serio, pinexio); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pinexio->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pinexio); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id inexio_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_INEXIO, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, inexio_serio_ids); + +static struct serio_driver inexio_drv = { + .driver = { + .name = "inexio", + }, + .description = DRIVER_DESC, + .id_table = inexio_serio_ids, + .interrupt = inexio_interrupt, + .connect = inexio_connect, + .disconnect = inexio_disconnect, +}; + +module_serio_driver(inexio_drv); -- cgit v1.2.3-54-g00ecf