From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/media/i2c/cx25840/cx25840-audio.c | 571 ++++++++++++++++++++++++++++++ 1 file changed, 571 insertions(+) create mode 100644 drivers/media/i2c/cx25840/cx25840-audio.c (limited to 'drivers/media/i2c/cx25840/cx25840-audio.c') diff --git a/drivers/media/i2c/cx25840/cx25840-audio.c b/drivers/media/i2c/cx25840/cx25840-audio.c new file mode 100644 index 000000000..34b96c7cf --- /dev/null +++ b/drivers/media/i2c/cx25840/cx25840-audio.c @@ -0,0 +1,571 @@ +/* cx25840 audio functions + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include +#include +#include +#include + +#include "cx25840-core.h" + +/* + * Note: The PLL and SRC parameters are based on a reference frequency that + * would ideally be: + * + * NTSC Color subcarrier freq * 8 = 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz + * + * However, it's not the exact reference frequency that matters, only that the + * firmware and modules that comprise the driver for a particular board all + * use the same value (close to the ideal value). + * + * Comments below will note which reference frequency is assumed for various + * parameters. They will usually be one of + * + * ref_freq = 28.636360 MHz + * or + * ref_freq = 28.636363 MHz + */ + +static int cx25840_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x1006040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x1bb39ee + * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384 + * 196.6 MHz pre-postdivide + * FIXME < 200 MHz is out of specified valid range + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x01bb39ee); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x1009040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x0ec6bd6 + * 28636363 * 0x9.7635eb0/0x10 = 44100 * 384 + * 271 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x00ec6bd6); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x10 + */ + cx25840_write4(client, 0x108, 0x100a040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x098d6e5 + * 28636363 * 0xa.4c6b728/0x10 = 48000 * 384 + * 295 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x0098d6e5); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + case 32000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x08, AUX PLL Post Divider = 0x1e + */ + cx25840_write4(client, 0x108, 0x1e08040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x12a0869 + * 28636363 * 0x8.9504348/0x1e = 32000 * 256 + * 246 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x012a0869); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x14 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x54); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx25840_write4(client, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); + break; + + case 44100: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x18 + */ + cx25840_write4(client, 0x108, 0x1809040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x0ec6bd6 + * 28636363 * 0x9.7635eb0/0x18 = 44100 * 256 + * 271 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x00ec6bd6); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx25840_write4(client, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); + break; + + case 48000: + /* + * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 + * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x18 + */ + cx25840_write4(client, 0x108, 0x180a040f); + + /* + * VID_PLL Fraction (register 0x10c) = 0x2be2fe + * 28636360 * 0xf.15f17f0/4 = 108 MHz + * 432 MHz pre-postdivide + */ + + /* + * AUX_PLL Fraction = 0x098d6e5 + * 28636363 * 0xa.4c6b728/0x18 = 48000 * 256 + * 295 MHz pre-postdivide + * FIXME 28636363 ref_freq doesn't match VID PLL ref + */ + cx25840_write4(client, 0x110, 0x0098d6e5); + + /* + * SA_MCLK_SEL = 1 + * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider + */ + cx25840_write(client, 0x127, 0x50); + + if (is_cx2583x(state)) + break; + + /* src1_ctl */ + /* 0x1.8000 = 48000/32000 */ + cx25840_write4(client, 0x8f8, 0x08018000); + + /* src3/4/6_ctl */ + /* 0x1.5555 = 2 * (32000/48000) */ + cx25840_write4(client, 0x900, 0x08015555); + cx25840_write4(client, 0x904, 0x08015555); + cx25840_write4(client, 0x90c, 0x08015555); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static inline int cx25836_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + return cx25840_set_audclk_freq(client, freq); +} + +static int cx23885_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + case 44100: + case 48000: + /* We don't have register values + * so avoid destroying registers. */ + /* FIXME return -EINVAL; */ + break; + } + } else { + switch (freq) { + case 32000: + case 44100: + /* We don't have register values + * so avoid destroying registers. */ + /* FIXME return -EINVAL; */ + break; + + case 48000: + /* src1_ctl */ + /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ + cx25840_write4(client, 0x8f8, 0x0801867c); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static int cx231xx_set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (state->aud_input != CX25840_AUDIO_SERIAL) { + switch (freq) { + case 32000: + /* src3/4/6_ctl */ + /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */ + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); + break; + + case 44100: + /* src3/4/6_ctl */ + /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */ + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); + break; + + case 48000: + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } else { + switch (freq) { + /* FIXME These cases make different assumptions about audclk */ + case 32000: + /* src1_ctl */ + /* 0x1.0000 = 32000/32000 */ + cx25840_write4(client, 0x8f8, 0x08010000); + + /* src3/4/6_ctl */ + /* 0x2.0000 = 2 * (32000/32000) */ + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); + break; + + case 44100: + /* src1_ctl */ + /* 0x1.60cd = 44100/32000 */ + cx25840_write4(client, 0x8f8, 0x080160cd); + + /* src3/4/6_ctl */ + /* 0x1.7385 = 2 * (32000/44100) */ + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); + break; + + case 48000: + /* src1_ctl */ + /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */ + cx25840_write4(client, 0x8f8, 0x0801867c); + + /* src3/4/6_ctl */ + /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */ + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + break; + } + } + + state->audclk_freq = freq; + + return 0; +} + +static int set_audclk_freq(struct i2c_client *client, u32 freq) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (freq != 32000 && freq != 44100 && freq != 48000) + return -EINVAL; + + if (is_cx231xx(state)) + return cx231xx_set_audclk_freq(client, freq); + + if (is_cx2388x(state)) + return cx23885_set_audclk_freq(client, freq); + + if (is_cx2583x(state)) + return cx25836_set_audclk_freq(client, freq); + + return cx25840_set_audclk_freq(client, freq); +} + +void cx25840_audio_set_path(struct i2c_client *client) +{ + struct cx25840_state *state = to_state(i2c_get_clientdata(client)); + + if (!is_cx2583x(state)) { + /* assert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x01); + + /* stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0); + + /* Mute everything to prevent the PFFT! */ + cx25840_write(client, 0x8d3, 0x1f); + + if (state->aud_input == CX25840_AUDIO_SERIAL) { + /* Set Path1 to Serial Audio Input */ + cx25840_write4(client, 0x8d0, 0x01011012); + + /* The microcontroller should not be started for the + * non-tuner inputs: autodetection is specific for + * TV audio. */ + } else { + /* Set Path1 to Analog Demod Main Channel */ + cx25840_write4(client, 0x8d0, 0x1f063870); + } + } + + set_audclk_freq(client, state->audclk_freq); + + if (!is_cx2583x(state)) { + if (state->aud_input != CX25840_AUDIO_SERIAL) { + /* When the microcontroller detects the + * audio format, it will unmute the lines */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } + + /* deassert soft reset */ + cx25840_and_or(client, 0x810, ~0x1, 0x00); + + /* Ensure the controller is running when we exit */ + if (is_cx2388x(state) || is_cx231xx(state)) + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } +} + +static void set_volume(struct i2c_client *client, int volume) +{ + int vol; + + /* Convert the volume to msp3400 values (0-127) */ + vol = volume >> 9; + + /* now scale it up to cx25840 values + * -114dB to -96dB maps to 0 + * this should be 19, but in my testing that was 4dB too loud */ + if (vol <= 23) { + vol = 0; + } else { + vol -= 23; + } + + /* PATH1_VOLUME */ + cx25840_write(client, 0x8d4, 228 - (vol * 2)); +} + +static void set_balance(struct i2c_client *client, int balance) +{ + int bal = balance >> 8; + if (bal > 0x80) { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x80); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f); + } else { + /* PATH1_BAL_LEFT */ + cx25840_and_or(client, 0x8d5, 0x7f, 0x00); + /* PATH1_BAL_LEVEL */ + cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal); + } +} + +int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + struct cx25840_state *state = to_state(sd); + int retval; + + if (!is_cx2583x(state)) + cx25840_and_or(client, 0x810, ~0x1, 1); + if (state->aud_input != CX25840_AUDIO_SERIAL) { + cx25840_and_or(client, 0x803, ~0x10, 0); + cx25840_write(client, 0x8d3, 0x1f); + } + retval = set_audclk_freq(client, freq); + if (state->aud_input != CX25840_AUDIO_SERIAL) + cx25840_and_or(client, 0x803, ~0x10, 0x10); + if (!is_cx2583x(state)) + cx25840_and_or(client, 0x810, ~0x1, 0); + return retval; +} + +static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct cx25840_state *state = to_state(sd); + struct i2c_client *client = v4l2_get_subdevdata(sd); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + if (state->mute->val) + set_volume(client, 0); + else + set_volume(client, state->volume->val); + break; + case V4L2_CID_AUDIO_BASS: + /* PATH1_EQ_BASS_VOL */ + cx25840_and_or(client, 0x8d9, ~0x3f, + 48 - (ctrl->val * 48 / 0xffff)); + break; + case V4L2_CID_AUDIO_TREBLE: + /* PATH1_EQ_TREBLE_VOL */ + cx25840_and_or(client, 0x8db, ~0x3f, + 48 - (ctrl->val * 48 / 0xffff)); + break; + case V4L2_CID_AUDIO_BALANCE: + set_balance(client, ctrl->val); + break; + default: + return -EINVAL; + } + return 0; +} + +const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = { + .s_ctrl = cx25840_audio_s_ctrl, +}; -- cgit v1.2.3-54-g00ecf