From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/media/rc/Kconfig | 391 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 391 insertions(+) create mode 100644 drivers/media/rc/Kconfig (limited to 'drivers/media/rc/Kconfig') diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig new file mode 100644 index 000000000..ddfab256b --- /dev/null +++ b/drivers/media/rc/Kconfig @@ -0,0 +1,391 @@ +config RC_CORE + tristate + depends on MEDIA_RC_SUPPORT + depends on INPUT + default y + +source "drivers/media/rc/keymaps/Kconfig" + +menuconfig RC_DECODERS + bool "Remote controller decoders" + depends on RC_CORE + default y + +if RC_DECODERS +config LIRC + tristate "LIRC interface driver" + depends on RC_CORE + + ---help--- + Enable this option to build the Linux Infrared Remote + Control (LIRC) core device interface driver. The LIRC + interface passes raw IR to and from userspace, where the + LIRC daemon handles protocol decoding for IR reception and + encoding for IR transmitting (aka "blasting"). + +config IR_LIRC_CODEC + tristate "Enable IR to LIRC bridge" + depends on RC_CORE + depends on LIRC + default y + + ---help--- + Enable this option to pass raw IR to and from userspace via + the LIRC interface. + + +config IR_NEC_DECODER + tristate "Enable IR raw decoder for the NEC protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with NEC protocol, and + if the IR is decoded in software + +config IR_RC5_DECODER + tristate "Enable IR raw decoder for the RC-5 protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with RC-5 protocol, and + if the IR is decoded in software + +config IR_RC6_DECODER + tristate "Enable IR raw decoder for the RC6 protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the RC6 protocol, and you need software decoding support. + +config IR_JVC_DECODER + tristate "Enable IR raw decoder for the JVC protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the JVC protocol, and you need software decoding support. + +config IR_SONY_DECODER + tristate "Enable IR raw decoder for the Sony protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sony protocol, and you need software decoding support. + +config IR_SANYO_DECODER + tristate "Enable IR raw decoder for the Sanyo protocol" + depends on RC_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), + and you need software decoding support. + +config IR_SHARP_DECODER + tristate "Enable IR raw decoder for the Sharp protocol" + depends on RC_CORE + default y + + ---help--- + Enable this option if you have an infrared remote control which + uses the Sharp protocol, and you need software decoding support. + +config IR_MCE_KBD_DECODER + tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have a Microsoft Remote Keyboard for + Windows Media Center Edition, which you would like to use with + a raw IR receiver in your system. + +config IR_XMP_DECODER + tristate "Enable IR raw decoder for the XMP protocol" + depends on RC_CORE + select BITREVERSE + default y + + ---help--- + Enable this option if you have IR with XMP protocol, and + if the IR is decoded in software +endif #RC_DECODERS + +menuconfig RC_DEVICES + bool "Remote Controller devices" + depends on RC_CORE + +if RC_DEVICES + +config RC_ATI_REMOTE + tristate "ATI / X10 based USB RF remote controls" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + help + Say Y here if you want to use an X10 based USB remote control. + These are RF remotes with USB receivers. + + Such devices include the ATI remote that comes with many of ATI's + All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, + Medion RF remote, and SnapStream FireFly remote. + + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. + +config IR_ENE + tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transceiver made by ENE. + + You can see if you have it by looking at lspnp output. + Output should include ENE0100 ENE0200 or something similar. + + To compile this driver as a module, choose M here: the + module will be called ene_ir. + +config IR_HIX5HD2 + tristate "Hisilicon hix5hd2 IR remote control" + depends on RC_CORE + help + Say Y here if you want to use hisilicon hix5hd2 remote control. + To compile this driver as a module, choose M here: the module will be + called ir-hix5hd2. + + If you're not sure, select N here + +config IR_IMON + tristate "SoundGraph iMON Receiver and Display" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) + IR Receiver and/or LCD/VFD/VGA display. + + To compile this driver as a module, choose M here: the + module will be called imon. + +config IR_MCEUSB + tristate "Windows Media Center Ed. eHome Infrared Transceiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a Windows Media Center Edition + eHome Infrared Transceiver. + + To compile this driver as a module, choose M here: the + module will be called mceusb. + +config IR_ITE_CIR + tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receivers + /transceivers made by ITE Tech Inc. These are found in + several ASUS devices, like the ASUS Digimatrix or the ASUS + EEEBox 1501U. + + To compile this driver as a module, choose M here: the + module will be called ite-cir. + +config IR_FINTEK + tristate "Fintek Consumer Infrared Transceiver" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transciever made by Fintek. This chip is found on assorted + Jetway motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called fintek-cir. + +config IR_MESON + tristate "Amlogic Meson IR remote receiver" + depends on RC_CORE + depends on ARCH_MESON || COMPILE_TEST + ---help--- + Say Y if you want to use the IR remote receiver available + on Amlogic Meson SoCs. + + To compile this driver as a module, choose M here: the + module will be called meson-ir. + +config IR_NUVOTON + tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transciever made by Nuvoton (formerly Winbond). This chip is + found in the ASRock ION 330HT, as well as assorted Intel + DP55-series motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called nuvoton-cir. + +config IR_REDRAT3 + tristate "RedRat3 IR Transceiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select NEW_LEDS + select LEDS_CLASS + select USB + ---help--- + Say Y here if you want to use a RedRat3 Infrared Transceiver. + + To compile this driver as a module, choose M here: the + module will be called redrat3. + +config IR_STREAMZAP + tristate "Streamzap PC Remote IR Receiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use a Streamzap PC Remote + Infrared Receiver. + + To compile this driver as a module, choose M here: the + module will be called streamzap. + +config IR_WINBOND_CIR + tristate "Winbond IR remote control" + depends on X86 && PNP + depends on RC_CORE + select NEW_LEDS + select LEDS_CLASS + select BITREVERSE + ---help--- + Say Y here if you want to use the IR remote functionality found + in some Winbond SuperI/O chips. Currently only the WPCD376I + chip is supported (included in some Intel Media series + motherboards). + + To compile this driver as a module, choose M here: the module will + be called winbond_cir. + +config IR_IGORPLUGUSB + tristate "IgorPlug-USB IR Receiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use the IgorPlug-USB IR Receiver by + Igor Cesko. This device is included on the Fit-PC2. + + Note that this device can only record bursts of 36 IR pulses and + spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. + + To compile this driver as a module, choose M here: the module will + be called igorplugusb. + +config IR_IGUANA + tristate "IguanaWorks USB IR Transceiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + ---help--- + Say Y here if you want to use the IguanaWorks USB IR Transceiver. + Both infrared receive and send are supported. If you want to + change the ID or the pin config, use the user space driver from + IguanaWorks. + + Only firmware 0x0205 and later is supported. + + To compile this driver as a module, choose M here: the module will + be called iguanair. + +config IR_TTUSBIR + tristate "TechnoTrend USB IR Receiver" + depends on USB_ARCH_HAS_HCD + depends on RC_CORE + select USB + select NEW_LEDS + select LEDS_CLASS + ---help--- + Say Y here if you want to use the TechnoTrend USB IR Receiver. The + driver can control the led. + + To compile this driver as a module, choose M here: the module will + be called ttusbir. + +config IR_RX51 + tristate "Nokia N900 IR transmitter diode" + depends on OMAP_DM_TIMER && ARCH_OMAP2PLUS && LIRC && !ARCH_MULTIPLATFORM + ---help--- + Say Y or M here if you want to enable support for the IR + transmitter diode built in the Nokia N900 (RX51) device. + + The driver uses omap DM timers for generating the carrier + wave and pulses. + +source "drivers/media/rc/img-ir/Kconfig" + +config RC_LOOPBACK + tristate "Remote Control Loopback Driver" + depends on RC_CORE + ---help--- + Say Y here if you want support for the remote control loopback + driver which allows TX data to be sent back as RX data. + This is mostly useful for debugging purposes. + + If you're not sure, select N here. + + To compile this driver as a module, choose M here: the module will + be called rc_loopback. + +config IR_GPIO_CIR + tristate "GPIO IR remote control" + depends on RC_CORE + ---help--- + Say Y if you want to use GPIO based IR Receiver. + + To compile this driver as a module, choose M here: the module will + be called gpio-ir-recv. + +config RC_ST + tristate "ST remote control receiver" + depends on RC_CORE + depends on ARCH_STI || COMPILE_TEST + help + Say Y here if you want support for ST remote control driver + which allows both IR and UHF RX. + The driver passes raw pulse and space information to the LIRC decoder. + + If you're not sure, select N here. + +config IR_SUNXI + tristate "SUNXI IR remote control" + depends on RC_CORE + depends on ARCH_SUNXI || COMPILE_TEST + ---help--- + Say Y if you want to use sunXi internal IR Controller + + To compile this driver as a module, choose M here: the module will + be called sunxi-ir. + +endif #RC_DEVICES -- cgit v1.2.3-54-g00ecf