From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/media/rc/img-ir/img-ir-hw.h | 301 ++++++++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 drivers/media/rc/img-ir/img-ir-hw.h (limited to 'drivers/media/rc/img-ir/img-ir-hw.h') diff --git a/drivers/media/rc/img-ir/img-ir-hw.h b/drivers/media/rc/img-ir/img-ir-hw.h new file mode 100644 index 000000000..91a297731 --- /dev/null +++ b/drivers/media/rc/img-ir/img-ir-hw.h @@ -0,0 +1,301 @@ +/* + * ImgTec IR Hardware Decoder found in PowerDown Controller. + * + * Copyright 2010-2014 Imagination Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef _IMG_IR_HW_H_ +#define _IMG_IR_HW_H_ + +#include +#include + +/* constants */ + +#define IMG_IR_CODETYPE_PULSELEN 0x0 /* Sony */ +#define IMG_IR_CODETYPE_PULSEDIST 0x1 /* NEC, Toshiba, Micom, Sharp */ +#define IMG_IR_CODETYPE_BIPHASE 0x2 /* RC-5/6 */ +#define IMG_IR_CODETYPE_2BITPULSEPOS 0x3 /* RC-MM */ + + +/* Timing information */ + +/** + * struct img_ir_control - Decoder control settings + * @decoden: Primary decoder enable + * @code_type: Decode type (see IMG_IR_CODETYPE_*) + * @hdrtog: Detect header toggle symbol after leader symbol + * @ldrdec: Don't discard leader if maximum width reached + * @decodinpol: Decoder input polarity (1=active high) + * @bitorien: Bit orientation (1=MSB first) + * @d1validsel: Decoder 2 takes over if it detects valid data + * @bitinv: Bit inversion switch (1=don't invert) + * @decodend2: Secondary decoder enable (no leader symbol) + * @bitoriend2: Bit orientation (1=MSB first) + * @bitinvd2: Secondary decoder bit inversion switch (1=don't invert) + */ +struct img_ir_control { + unsigned decoden:1; + unsigned code_type:2; + unsigned hdrtog:1; + unsigned ldrdec:1; + unsigned decodinpol:1; + unsigned bitorien:1; + unsigned d1validsel:1; + unsigned bitinv:1; + unsigned decodend2:1; + unsigned bitoriend2:1; + unsigned bitinvd2:1; +}; + +/** + * struct img_ir_timing_range - range of timing values + * @min: Minimum timing value + * @max: Maximum timing value (if < @min, this will be set to @min during + * preprocessing step, so it is normally not explicitly initialised + * and is taken care of by the tolerance) + */ +struct img_ir_timing_range { + u16 min; + u16 max; +}; + +/** + * struct img_ir_symbol_timing - timing data for a symbol + * @pulse: Timing range for the length of the pulse in this symbol + * @space: Timing range for the length of the space in this symbol + */ +struct img_ir_symbol_timing { + struct img_ir_timing_range pulse; + struct img_ir_timing_range space; +}; + +/** + * struct img_ir_free_timing - timing data for free time symbol + * @minlen: Minimum number of bits of data + * @maxlen: Maximum number of bits of data + * @ft_min: Minimum free time after message + */ +struct img_ir_free_timing { + /* measured in bits */ + u8 minlen; + u8 maxlen; + u16 ft_min; +}; + +/** + * struct img_ir_timings - Timing values. + * @ldr: Leader symbol timing data + * @s00: Zero symbol timing data for primary decoder + * @s01: One symbol timing data for primary decoder + * @s10: Zero symbol timing data for secondary (no leader symbol) decoder + * @s11: One symbol timing data for secondary (no leader symbol) decoder + * @ft: Free time symbol timing data + */ +struct img_ir_timings { + struct img_ir_symbol_timing ldr, s00, s01, s10, s11; + struct img_ir_free_timing ft; +}; + +/** + * struct img_ir_filter - Filter IR events. + * @data: Data to match. + * @mask: Mask of bits to compare. + * @minlen: Additional minimum number of bits. + * @maxlen: Additional maximum number of bits. + */ +struct img_ir_filter { + u64 data; + u64 mask; + u8 minlen; + u8 maxlen; +}; + +/** + * struct img_ir_timing_regvals - Calculated timing register values. + * @ldr: Leader symbol timing register value + * @s00: Zero symbol timing register value for primary decoder + * @s01: One symbol timing register value for primary decoder + * @s10: Zero symbol timing register value for secondary decoder + * @s11: One symbol timing register value for secondary decoder + * @ft: Free time symbol timing register value + */ +struct img_ir_timing_regvals { + u32 ldr, s00, s01, s10, s11, ft; +}; + +#define IMG_IR_SCANCODE 0 /* new scancode */ +#define IMG_IR_REPEATCODE 1 /* repeat the previous code */ + +/** + * struct img_ir_scancode_req - Scancode request data. + * @protocol: Protocol code of received message (defaults to + * RC_TYPE_UNKNOWN). + * @scancode: Scan code of received message (must be written by + * handler if IMG_IR_SCANCODE is returned). + * @toggle: Toggle bit (defaults to 0). + */ +struct img_ir_scancode_req { + enum rc_type protocol; + u32 scancode; + u8 toggle; +}; + +/** + * struct img_ir_decoder - Decoder settings for an IR protocol. + * @type: Protocol types bitmap. + * @tolerance: Timing tolerance as a percentage (default 10%). + * @unit: Unit of timings in nanoseconds (default 1 us). + * @timings: Primary timings + * @rtimings: Additional override timings while waiting for repeats. + * @repeat: Maximum repeat interval (always in milliseconds). + * @control: Control flags. + * + * @scancode: Pointer to function to convert the IR data into a scancode (it + * must be safe to execute in interrupt context). + * Returns IMG_IR_SCANCODE to emit new scancode. + * Returns IMG_IR_REPEATCODE to repeat previous code. + * Returns -errno (e.g. -EINVAL) on error. + * @filter: Pointer to function to convert scancode filter to raw hardware + * filter. The minlen and maxlen fields will have been initialised + * to the maximum range. + */ +struct img_ir_decoder { + /* core description */ + u64 type; + unsigned int tolerance; + unsigned int unit; + struct img_ir_timings timings; + struct img_ir_timings rtimings; + unsigned int repeat; + struct img_ir_control control; + + /* scancode logic */ + int (*scancode)(int len, u64 raw, u64 enabled_protocols, + struct img_ir_scancode_req *request); + int (*filter)(const struct rc_scancode_filter *in, + struct img_ir_filter *out, u64 protocols); +}; + +extern struct img_ir_decoder img_ir_nec; +extern struct img_ir_decoder img_ir_jvc; +extern struct img_ir_decoder img_ir_sony; +extern struct img_ir_decoder img_ir_sharp; +extern struct img_ir_decoder img_ir_sanyo; +extern struct img_ir_decoder img_ir_rc5; +extern struct img_ir_decoder img_ir_rc6; + +/** + * struct img_ir_reg_timings - Reg values for decoder timings at clock rate. + * @ctrl: Processed control register value. + * @timings: Processed primary timings. + * @rtimings: Processed repeat timings. + */ +struct img_ir_reg_timings { + u32 ctrl; + struct img_ir_timing_regvals timings; + struct img_ir_timing_regvals rtimings; +}; + +struct img_ir_priv; + +#ifdef CONFIG_IR_IMG_HW + +enum img_ir_mode { + IMG_IR_M_NORMAL, + IMG_IR_M_REPEATING, +#ifdef CONFIG_PM_SLEEP + IMG_IR_M_WAKE, +#endif +}; + +/** + * struct img_ir_priv_hw - Private driver data for hardware decoder. + * @ct_quirks: Quirk bits for each code type. + * @rdev: Remote control device + * @clk_nb: Notifier block for clock notify events. + * @end_timer: Timer until repeat timeout. + * @suspend_timer: Timer to re-enable protocol. + * @decoder: Current decoder settings. + * @enabled_protocols: Currently enabled protocols. + * @clk_hz: Current core clock rate in Hz. + * @reg_timings: Timing reg values for decoder at clock rate. + * @flags: IMG_IR_F_*. + * @filters: HW filters (derived from scancode filters). + * @mode: Current decode mode. + * @stopping: Indicates that decoder is being taken down and timers + * should not be restarted. + * @suspend_irqen: Saved IRQ enable mask over suspend. + * @quirk_suspend_irq: Saved IRQ enable mask over quirk suspend timer. + */ +struct img_ir_priv_hw { + unsigned int ct_quirks[4]; + struct rc_dev *rdev; + struct notifier_block clk_nb; + struct timer_list end_timer; + struct timer_list suspend_timer; + const struct img_ir_decoder *decoder; + u64 enabled_protocols; + unsigned long clk_hz; + struct img_ir_reg_timings reg_timings; + unsigned int flags; + struct img_ir_filter filters[RC_FILTER_MAX]; + + enum img_ir_mode mode; + bool stopping; + u32 suspend_irqen; + u32 quirk_suspend_irq; +}; + +static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw) +{ + return hw->rdev; +}; + +void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status); +void img_ir_setup_hw(struct img_ir_priv *priv); +int img_ir_probe_hw(struct img_ir_priv *priv); +void img_ir_remove_hw(struct img_ir_priv *priv); + +#ifdef CONFIG_PM_SLEEP +int img_ir_suspend(struct device *dev); +int img_ir_resume(struct device *dev); +#else +#define img_ir_suspend NULL +#define img_ir_resume NULL +#endif + +#else + +struct img_ir_priv_hw { +}; + +static inline bool img_ir_hw_enabled(struct img_ir_priv_hw *hw) +{ + return false; +}; +static inline void img_ir_isr_hw(struct img_ir_priv *priv, u32 irq_status) +{ +} +static inline void img_ir_setup_hw(struct img_ir_priv *priv) +{ +} +static inline int img_ir_probe_hw(struct img_ir_priv *priv) +{ + return -ENODEV; +} +static inline void img_ir_remove_hw(struct img_ir_priv *priv) +{ +} + +#define img_ir_suspend NULL +#define img_ir_resume NULL + +#endif /* CONFIG_IR_IMG_HW */ + +#endif /* _IMG_IR_HW_H_ */ -- cgit v1.2.3-54-g00ecf