From d0b2f91bede3bd5e3d24dd6803e56eee959c1797 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Thu, 20 Oct 2016 00:10:27 -0300 Subject: Linux-libre 4.8.2-gnu --- drivers/mmc/core/bus.c | 3 +- drivers/mmc/core/core.c | 95 +++++++++++++---- drivers/mmc/core/debugfs.c | 3 +- drivers/mmc/core/host.c | 8 ++ drivers/mmc/core/mmc.c | 253 +++++++++++++++++++++++++++++++-------------- drivers/mmc/core/mmc_ops.c | 27 +++-- drivers/mmc/core/quirks.c | 2 + drivers/mmc/core/sd.c | 19 ++++ 8 files changed, 297 insertions(+), 113 deletions(-) (limited to 'drivers/mmc/core') diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 4bc48f104..c64266f5a 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -332,12 +332,13 @@ int mmc_add_card(struct mmc_card *card) mmc_card_ddr52(card) ? "DDR " : "", type); } else { - pr_info("%s: new %s%s%s%s%s card at address %04x\n", + pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", mmc_hostname(card->host), mmc_card_uhs(card) ? "ultra high speed " : (mmc_card_hs(card) ? "high speed " : ""), mmc_card_hs400(card) ? "HS400 " : (mmc_card_hs200(card) ? "HS200 " : ""), + mmc_card_hs400es(card) ? "Enhanced strobe " : "", mmc_card_ddr52(card) ? "DDR " : "", uhs_bus_speed_mode, type, card->rca); } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 8b4dfd454..e55cde6d4 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1127,6 +1127,15 @@ void mmc_set_initial_state(struct mmc_host *host) host->ios.bus_width = MMC_BUS_WIDTH_1; host->ios.timing = MMC_TIMING_LEGACY; host->ios.drv_type = 0; + host->ios.enhanced_strobe = false; + + /* + * Make sure we are in non-enhanced strobe mode before we + * actually enable it in ext_csd. + */ + if ((host->caps2 & MMC_CAP2_HS400_ES) && + host->ops->hs400_enhanced_strobe) + host->ops->hs400_enhanced_strobe(host, &host->ios); mmc_set_ios(host); } @@ -1925,17 +1934,15 @@ void mmc_init_erase(struct mmc_card *card) * to that size and alignment. * * For SD cards that define Allocation Unit size, limit erases to one - * Allocation Unit at a time. For MMC cards that define High Capacity - * Erase Size, whether it is switched on or not, limit to that size. - * Otherwise just have a stab at a good value. For modern cards it - * will end up being 4MiB. Note that if the value is too small, it - * can end up taking longer to erase. + * Allocation Unit at a time. + * For MMC, have a stab at ai good value and for modern cards it will + * end up being 4MiB. Note that if the value is too small, it can end + * up taking longer to erase. Also note, erase_size is already set to + * High Capacity Erase Size if available when this function is called. */ if (mmc_card_sd(card) && card->ssr.au) { card->pref_erase = card->ssr.au; card->erase_shift = ffs(card->ssr.au) - 1; - } else if (card->ext_csd.hc_erase_size) { - card->pref_erase = card->ext_csd.hc_erase_size; } else if (card->erase_size) { sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11; if (sz < 128) @@ -2060,7 +2067,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, unsigned int to, unsigned int arg) { struct mmc_command cmd = {0}; - unsigned int qty = 0; + unsigned int qty = 0, busy_timeout = 0; + bool use_r1b_resp = false; unsigned long timeout; int err; @@ -2128,8 +2136,22 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_ERASE; cmd.arg = arg; - cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; - cmd.busy_timeout = mmc_erase_timeout(card, arg, qty); + busy_timeout = mmc_erase_timeout(card, arg, qty); + /* + * If the host controller supports busy signalling and the timeout for + * the erase operation does not exceed the max_busy_timeout, we should + * use R1B response. Or we need to prevent the host from doing hw busy + * detection, which is done by converting to a R1 response instead. + */ + if (card->host->max_busy_timeout && + busy_timeout > card->host->max_busy_timeout) { + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = busy_timeout; + use_r1b_resp = true; + } + err = mmc_wait_for_cmd(card->host, &cmd, 0); if (err) { pr_err("mmc_erase: erase error %d, status %#x\n", @@ -2141,7 +2163,14 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from, if (mmc_host_is_spi(card->host)) goto out; - timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS); + /* + * In case of when R1B + MMC_CAP_WAIT_WHILE_BUSY is used, the polling + * shall be avoided. + */ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) + goto out; + + timeout = jiffies + msecs_to_jiffies(busy_timeout); do { memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; @@ -2321,23 +2350,41 @@ static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, unsigned int arg) { struct mmc_host *host = card->host; - unsigned int max_discard, x, y, qty = 0, max_qty, timeout; + unsigned int max_discard, x, y, qty = 0, max_qty, min_qty, timeout; unsigned int last_timeout = 0; - if (card->erase_shift) + if (card->erase_shift) { max_qty = UINT_MAX >> card->erase_shift; - else if (mmc_card_sd(card)) + min_qty = card->pref_erase >> card->erase_shift; + } else if (mmc_card_sd(card)) { max_qty = UINT_MAX; - else + min_qty = card->pref_erase; + } else { max_qty = UINT_MAX / card->erase_size; + min_qty = card->pref_erase / card->erase_size; + } - /* Find the largest qty with an OK timeout */ + /* + * We should not only use 'host->max_busy_timeout' as the limitation + * when deciding the max discard sectors. We should set a balance value + * to improve the erase speed, and it can not get too long timeout at + * the same time. + * + * Here we set 'card->pref_erase' as the minimal discard sectors no + * matter what size of 'host->max_busy_timeout', but if the + * 'host->max_busy_timeout' is large enough for more discard sectors, + * then we can continue to increase the max discard sectors until we + * get a balance value. + */ do { y = 0; for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { timeout = mmc_erase_timeout(card, arg, qty + x); - if (timeout > host->max_busy_timeout) + + if (qty + x > min_qty && + timeout > host->max_busy_timeout) break; + if (timeout < last_timeout) break; last_timeout = timeout; @@ -2491,17 +2538,21 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) mmc_go_idle(host); - mmc_send_if_cond(host, host->ocr_avail); + if (!(host->caps2 & MMC_CAP2_NO_SD)) + mmc_send_if_cond(host, host->ocr_avail); /* Order's important: probe SDIO, then SD, then MMC */ if (!(host->caps2 & MMC_CAP2_NO_SDIO)) if (!mmc_attach_sdio(host)) return 0; - if (!mmc_attach_sd(host)) - return 0; - if (!mmc_attach_mmc(host)) - return 0; + if (!(host->caps2 & MMC_CAP2_NO_SD)) + if (!mmc_attach_sd(host)) + return 0; + + if (!(host->caps2 & MMC_CAP2_NO_MMC)) + if (!mmc_attach_mmc(host)) + return 0; mmc_power_off(host); return -EIO; diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 9382a57a5..c8451ce55 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -148,7 +148,8 @@ static int mmc_ios_show(struct seq_file *s, void *data) str = "mmc HS200"; break; case MMC_TIMING_MMC_HS400: - str = "mmc HS400"; + str = mmc_card_hs400es(host->card) ? + "mmc HS400 enhanced strobe" : "mmc HS400"; break; default: str = "invalid"; diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 1be42fab1..98f25ffb4 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -313,6 +313,14 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; if (of_property_read_bool(np, "mmc-hs400-1_2v")) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) + host->caps2 |= MMC_CAP2_HS400_ES; + if (of_property_read_bool(np, "no-sdio")) + host->caps2 |= MMC_CAP2_NO_SDIO; + if (of_property_read_bool(np, "no-sd")) + host->caps2 |= MMC_CAP2_NO_SD; + if (of_property_read_bool(np, "no-mmc")) + host->caps2 |= MMC_CAP2_NO_MMC; host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); if (host->dsr_req && (host->dsr & ~0xffff)) { diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 5d438ad3e..f2d185cf8 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -45,6 +45,17 @@ static const unsigned int tacc_mant[] = { 35, 40, 45, 50, 55, 60, 70, 80, }; +static const struct mmc_fixup mmc_ext_csd_fixups[] = { + /* + * Certain Hynix eMMC 4.41 cards might get broken when HPI feature + * is used so disable the HPI feature for such buggy cards. + */ + MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX, + 0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5), + + END_FIXUP +}; + #define UNSTUFF_BITS(resp,start,size) \ ({ \ const int __size = size; \ @@ -235,6 +246,11 @@ static void mmc_select_card_type(struct mmc_card *card) avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; } + if ((caps2 & MMC_CAP2_HS400_ES) && + card->ext_csd.strobe_support && + (avail_type & EXT_CSD_CARD_TYPE_HS400)) + avail_type |= EXT_CSD_CARD_TYPE_HS400ES; + card->ext_csd.hs_max_dtr = hs_max_dtr; card->ext_csd.hs200_max_dtr = hs200_max_dtr; card->mmc_avail_type = avail_type; @@ -370,6 +386,9 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) */ card->ext_csd.rev = ext_csd[EXT_CSD_REV]; + /* fixup device after ext_csd revision field is updated */ + mmc_fixup_device(card, mmc_ext_csd_fixups); + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; @@ -386,6 +405,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) mmc_card_set_blockaddr(card); } + card->ext_csd.strobe_support = ext_csd[EXT_CSD_STROBE_SUPPORT]; card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; mmc_select_card_type(card); @@ -500,7 +520,8 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) card->cid.year += 16; /* check whether the eMMC card supports BKOPS */ - if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + if (!mmc_card_broken_hpi(card) && + ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { card->ext_csd.bkops = 1; card->ext_csd.man_bkops_en = (ext_csd[EXT_CSD_BKOPS_EN] & @@ -513,7 +534,8 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) } /* check whether the eMMC card supports HPI */ - if (!broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) { + if (!mmc_card_broken_hpi(card) && + !broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) { card->ext_csd.hpi = 1; if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION; @@ -727,6 +749,7 @@ MMC_DEV_ATTR(enhanced_area_offset, "%llu\n", MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size); MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult); MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors); +MMC_DEV_ATTR(ocr, "%08x\n", card->ocr); static ssize_t mmc_fwrev_show(struct device *dev, struct device_attribute *attr, @@ -744,6 +767,22 @@ static ssize_t mmc_fwrev_show(struct device *dev, static DEVICE_ATTR(fwrev, S_IRUGO, mmc_fwrev_show, NULL); +static ssize_t mmc_dsr_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + if (card->csd.dsr_imp && host->dsr_req) + return sprintf(buf, "0x%x\n", host->dsr); + else + /* return default DSR value */ + return sprintf(buf, "0x%x\n", 0x404); +} + +static DEVICE_ATTR(dsr, S_IRUGO, mmc_dsr_show, NULL); + static struct attribute *mmc_std_attrs[] = { &dev_attr_cid.attr, &dev_attr_csd.attr, @@ -762,6 +801,8 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_enhanced_area_size.attr, &dev_attr_raw_rpmb_size_mult.attr, &dev_attr_rel_sectors.attr, + &dev_attr_ocr.attr, + &dev_attr_dsr.attr, NULL, }; ATTRIBUTE_GROUPS(mmc_std); @@ -959,6 +1000,19 @@ static int mmc_select_bus_width(struct mmc_card *card) return err; } +/* Caller must hold re-tuning */ +static int mmc_switch_status(struct mmc_card *card) +{ + u32 status; + int err; + + err = mmc_send_status(card, &status); + if (err) + return err; + + return mmc_switch_status_error(card->host, status); +} + /* * Switch to the high-speed mode */ @@ -969,9 +1023,11 @@ static int mmc_select_hs(struct mmc_card *card) err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, card->ext_csd.generic_cmd6_time, - true, true, true); - if (!err) + true, false, true); + if (!err) { mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + err = mmc_switch_status(card); + } return err; } @@ -1047,23 +1103,9 @@ static int mmc_select_hs_ddr(struct mmc_card *card) return err; } -/* Caller must hold re-tuning */ -static int mmc_switch_status(struct mmc_card *card) -{ - u32 status; - int err; - - err = mmc_send_status(card, &status); - if (err) - return err; - - return mmc_switch_status_error(card->host, status); -} - static int mmc_select_hs400(struct mmc_card *card) { struct mmc_host *host = card->host; - bool send_status = true; unsigned int max_dtr; int err = 0; u8 val; @@ -1075,19 +1117,12 @@ static int mmc_select_hs400(struct mmc_card *card) host->ios.bus_width == MMC_BUS_WIDTH_8)) return 0; - if (host->caps & MMC_CAP_WAIT_WHILE_BUSY) - send_status = false; - - /* Reduce frequency to HS frequency */ - max_dtr = card->ext_csd.hs_max_dtr; - mmc_set_clock(host, max_dtr); - /* Switch card to HS mode */ val = EXT_CSD_TIMING_HS; err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, val, card->ext_csd.generic_cmd6_time, - true, send_status, true); + true, false, true); if (err) { pr_err("%s: switch to high-speed from hs200 failed, err:%d\n", mmc_hostname(host), err); @@ -1097,11 +1132,13 @@ static int mmc_select_hs400(struct mmc_card *card) /* Set host controller to HS timing */ mmc_set_timing(card->host, MMC_TIMING_MMC_HS); - if (!send_status) { - err = mmc_switch_status(card); - if (err) - goto out_err; - } + /* Reduce frequency to HS frequency */ + max_dtr = card->ext_csd.hs_max_dtr; + mmc_set_clock(host, max_dtr); + + err = mmc_switch_status(card); + if (err) + goto out_err; /* Switch card to DDR */ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, @@ -1120,7 +1157,7 @@ static int mmc_select_hs400(struct mmc_card *card) err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, val, card->ext_csd.generic_cmd6_time, - true, send_status, true); + true, false, true); if (err) { pr_err("%s: switch to hs400 failed, err:%d\n", mmc_hostname(host), err); @@ -1131,11 +1168,9 @@ static int mmc_select_hs400(struct mmc_card *card) mmc_set_timing(host, MMC_TIMING_MMC_HS400); mmc_set_bus_speed(card); - if (!send_status) { - err = mmc_switch_status(card); - if (err) - goto out_err; - } + err = mmc_switch_status(card); + if (err) + goto out_err; return 0; @@ -1153,14 +1188,10 @@ int mmc_hs200_to_hs400(struct mmc_card *card) int mmc_hs400_to_hs200(struct mmc_card *card) { struct mmc_host *host = card->host; - bool send_status = true; unsigned int max_dtr; int err; u8 val; - if (host->caps & MMC_CAP_WAIT_WHILE_BUSY) - send_status = false; - /* Reduce frequency to HS */ max_dtr = card->ext_csd.hs_max_dtr; mmc_set_clock(host, max_dtr); @@ -1169,49 +1200,43 @@ int mmc_hs400_to_hs200(struct mmc_card *card) val = EXT_CSD_TIMING_HS; err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, val, card->ext_csd.generic_cmd6_time, - true, send_status, true); + true, false, true); if (err) goto out_err; mmc_set_timing(host, MMC_TIMING_MMC_DDR52); - if (!send_status) { - err = mmc_switch_status(card); - if (err) - goto out_err; - } + err = mmc_switch_status(card); + if (err) + goto out_err; /* Switch HS DDR to HS */ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_8, card->ext_csd.generic_cmd6_time, - true, send_status, true); + true, false, true); if (err) goto out_err; mmc_set_timing(host, MMC_TIMING_MMC_HS); - if (!send_status) { - err = mmc_switch_status(card); - if (err) - goto out_err; - } + err = mmc_switch_status(card); + if (err) + goto out_err; /* Switch HS to HS200 */ val = EXT_CSD_TIMING_HS200 | card->drive_strength << EXT_CSD_DRV_STR_SHIFT; err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, - val, card->ext_csd.generic_cmd6_time, true, - send_status, true); + val, card->ext_csd.generic_cmd6_time, + true, false, true); if (err) goto out_err; mmc_set_timing(host, MMC_TIMING_MMC_HS200); - if (!send_status) { - err = mmc_switch_status(card); - if (err) - goto out_err; - } + err = mmc_switch_status(card); + if (err) + goto out_err; mmc_set_bus_speed(card); @@ -1223,6 +1248,78 @@ out_err: return err; } +static int mmc_select_hs400es(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + u8 val; + + if (!(host->caps & MMC_CAP_8_BIT_DATA)) { + err = -ENOTSUPP; + goto out_err; + } + + err = mmc_select_bus_width(card); + if (err < 0) + goto out_err; + + /* Switch card to HS mode */ + err = mmc_select_hs(card); + if (err) { + pr_err("%s: switch to high-speed failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + err = mmc_switch_status(card); + if (err) + goto out_err; + + /* Switch card to DDR with strobe bit */ + val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + val, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("%s: switch to bus width for hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + /* Switch card to HS400 */ + val = EXT_CSD_TIMING_HS400 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, + true, false, true); + if (err) { + pr_err("%s: switch to hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + /* Set host controller to HS400 timing and frequency */ + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + + /* Controller enable enhanced strobe function */ + host->ios.enhanced_strobe = true; + if (host->ops->hs400_enhanced_strobe) + host->ops->hs400_enhanced_strobe(host, &host->ios); + + err = mmc_switch_status(card); + if (err) + goto out_err; + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + static void mmc_select_driver_type(struct mmc_card *card) { int card_drv_type, drive_strength, drv_type; @@ -1250,7 +1347,6 @@ static void mmc_select_driver_type(struct mmc_card *card) static int mmc_select_hs200(struct mmc_card *card) { struct mmc_host *host = card->host; - bool send_status = true; unsigned int old_timing, old_signal_voltage; int err = -EINVAL; u8 val; @@ -1268,34 +1364,30 @@ static int mmc_select_hs200(struct mmc_card *card) mmc_select_driver_type(card); - if (host->caps & MMC_CAP_WAIT_WHILE_BUSY) - send_status = false; - /* * Set the bus width(4 or 8) with host's support and * switch to HS200 mode if bus width is set successfully. */ err = mmc_select_bus_width(card); - if (err >= 0) { + if (err > 0) { val = EXT_CSD_TIMING_HS200 | card->drive_strength << EXT_CSD_DRV_STR_SHIFT; err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, val, card->ext_csd.generic_cmd6_time, - true, send_status, true); + true, false, true); if (err) goto err; old_timing = host->ios.timing; mmc_set_timing(host, MMC_TIMING_MMC_HS200); - if (!send_status) { - err = mmc_switch_status(card); - /* - * mmc_select_timing() assumes timing has not changed if - * it is a switch error. - */ - if (err == -EBADMSG) - mmc_set_timing(host, old_timing); - } + + err = mmc_switch_status(card); + /* + * mmc_select_timing() assumes timing has not changed if + * it is a switch error. + */ + if (err == -EBADMSG) + mmc_set_timing(host, old_timing); } err: if (err) { @@ -1310,7 +1402,7 @@ err: } /* - * Activate High Speed or HS200 mode if supported. + * Activate High Speed, HS200 or HS400ES mode if supported. */ static int mmc_select_timing(struct mmc_card *card) { @@ -1319,7 +1411,9 @@ static int mmc_select_timing(struct mmc_card *card) if (!mmc_can_ext_csd(card)) goto bus_speed; - if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES) + err = mmc_select_hs400es(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) err = mmc_select_hs200(card); else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) err = mmc_select_hs(card); @@ -1583,7 +1677,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } else if (mmc_card_hs(card)) { /* Select the desired bus width optionally */ err = mmc_select_bus_width(card); - if (err >= 0) { + if (err > 0) { err = mmc_select_hs_ddr(card); if (err) goto free_card; @@ -1616,7 +1710,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * If cache size is higher than 0, this indicates * the existence of cache and it can be turned on. */ - if (card->ext_csd.cache_size > 0) { + if (!mmc_card_broken_hpi(card) && + card->ext_csd.cache_size > 0) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_CACHE_CTRL, 1, card->ext_csd.generic_cmd6_time); diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 62355bda6..ad6e9798e 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -480,6 +480,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, u32 status = 0; bool use_r1b_resp = use_busy_signal; bool expired = false; + bool busy = false; mmc_retune_hold(host); @@ -533,21 +534,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, timeout_ms = MMC_OPS_TIMEOUT_MS; /* Must check status to be sure of no errors. */ - timeout = jiffies + msecs_to_jiffies(timeout_ms); + timeout = jiffies + msecs_to_jiffies(timeout_ms) + 1; do { + /* + * Due to the possibility of being preempted after + * sending the status command, check the expiration + * time first. + */ + expired = time_after(jiffies, timeout); if (send_status) { - /* - * Due to the possibility of being preempted after - * sending the status command, check the expiration - * time first. - */ - expired = time_after(jiffies, timeout); err = __mmc_send_status(card, &status, ignore_crc); if (err) goto out; } if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) break; + if (host->ops->card_busy) { + if (!host->ops->card_busy(host)) + break; + busy = true; + } if (mmc_host_is_spi(host)) break; @@ -556,19 +562,20 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only * rely on waiting for the stated timeout to be sufficient. */ - if (!send_status) { + if (!send_status && !host->ops->card_busy) { mmc_delay(timeout_ms); goto out; } /* Timeout if the device never leaves the program state. */ - if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) { + if (expired && + (R1_CURRENT_STATE(status) == R1_STATE_PRG || busy)) { pr_err("%s: Card stuck in programming state! %s\n", mmc_hostname(host), __func__); err = -ETIMEDOUT; goto out; } - } while (R1_CURRENT_STATE(status) == R1_STATE_PRG); + } while (R1_CURRENT_STATE(status) == R1_STATE_PRG || busy); err = mmc_switch_status_error(host, status); out: diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c index fad660b95..ca9cade31 100644 --- a/drivers/mmc/core/quirks.c +++ b/drivers/mmc/core/quirks.c @@ -72,6 +72,8 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) f->cis_vendor == (u16) SDIO_ANY_ID) && (f->cis_device == card->cis.device || f->cis_device == (u16) SDIO_ANY_ID) && + (f->ext_csd_rev == EXT_CSD_REV_ANY || + f->ext_csd_rev == card->ext_csd.rev) && rev >= f->rev_start && rev <= f->rev_end) { dev_dbg(&card->dev, "calling %pf\n", f->vendor_fixup); f->vendor_fixup(card, f->data); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index b95bd24d9..012393624 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -675,8 +675,25 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(ocr, "%08x\n", card->ocr); +static ssize_t mmc_dsr_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + if (card->csd.dsr_imp && host->dsr_req) + return sprintf(buf, "0x%x\n", host->dsr); + else + /* return default DSR value */ + return sprintf(buf, "0x%x\n", 0x404); +} + +static DEVICE_ATTR(dsr, S_IRUGO, mmc_dsr_show, NULL); + static struct attribute *sd_std_attrs[] = { &dev_attr_cid.attr, &dev_attr_csd.attr, @@ -690,6 +707,8 @@ static struct attribute *sd_std_attrs[] = { &dev_attr_name.attr, &dev_attr_oemid.attr, &dev_attr_serial.attr, + &dev_attr_ocr.attr, + &dev_attr_dsr.attr, NULL, }; ATTRIBUTE_GROUPS(sd_std); -- cgit v1.2.3-54-g00ecf