From 863981e96738983919de841ec669e157e6bdaeb0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Sun, 11 Sep 2016 04:34:46 -0300
Subject: Linux-libre 4.7.1-gnu

---
 drivers/mtd/nand/nand_bch.c | 48 +++++++++++++++------------------------------
 1 file changed, 16 insertions(+), 32 deletions(-)

(limited to 'drivers/mtd/nand/nand_bch.c')

diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index b585bae37..44763f87e 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -32,13 +32,11 @@
 /**
  * struct nand_bch_control - private NAND BCH control structure
  * @bch:       BCH control structure
- * @ecclayout: private ecc layout for this BCH configuration
  * @errloc:    error location array
  * @eccmask:   XOR ecc mask, allows erased pages to be decoded as valid
  */
 struct nand_bch_control {
 	struct bch_control   *bch;
-	struct nand_ecclayout ecclayout;
 	unsigned int         *errloc;
 	unsigned char        *eccmask;
 };
@@ -124,7 +122,6 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 {
 	struct nand_chip *nand = mtd_to_nand(mtd);
 	unsigned int m, t, eccsteps, i;
-	struct nand_ecclayout *layout = nand->ecc.layout;
 	struct nand_bch_control *nbc = NULL;
 	unsigned char *erased_page;
 	unsigned int eccsize = nand->ecc.size;
@@ -161,34 +158,10 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 
 	eccsteps = mtd->writesize/eccsize;
 
-	/* if no ecc placement scheme was provided, build one */
-	if (!layout) {
-
-		/* handle large page devices only */
-		if (mtd->oobsize < 64) {
-			printk(KERN_WARNING "must provide an oob scheme for "
-			       "oobsize %d\n", mtd->oobsize);
-			goto fail;
-		}
-
-		layout = &nbc->ecclayout;
-		layout->eccbytes = eccsteps*eccbytes;
-
-		/* reserve 2 bytes for bad block marker */
-		if (layout->eccbytes+2 > mtd->oobsize) {
-			printk(KERN_WARNING "no suitable oob scheme available "
-			       "for oobsize %d eccbytes %u\n", mtd->oobsize,
-			       eccbytes);
-			goto fail;
-		}
-		/* put ecc bytes at oob tail */
-		for (i = 0; i < layout->eccbytes; i++)
-			layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
-
-		layout->oobfree[0].offset = 2;
-		layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
-
-		nand->ecc.layout = layout;
+	/* Check that we have an oob layout description. */
+	if (!mtd->ooblayout) {
+		pr_warn("missing oob scheme");
+		goto fail;
 	}
 
 	/* sanity checks */
@@ -196,7 +169,18 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 		printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
 		goto fail;
 	}
-	if (layout->eccbytes != (eccsteps*eccbytes)) {
+
+	/*
+	 * ecc->steps and ecc->total might be used by mtd->ooblayout->ecc(),
+	 * which is called by mtd_ooblayout_count_eccbytes().
+	 * Make sure they are properly initialized before calling
+	 * mtd_ooblayout_count_eccbytes().
+	 * FIXME: we should probably rework the sequencing in nand_scan_tail()
+	 * to avoid setting those fields twice.
+	 */
+	nand->ecc.steps = eccsteps;
+	nand->ecc.total = eccsteps * eccbytes;
+	if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
 		printk(KERN_WARNING "invalid ecc layout\n");
 		goto fail;
 	}
-- 
cgit v1.2.3-54-g00ecf