From b4b7ff4b08e691656c9d77c758fc355833128ac0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 20 Jan 2016 14:01:31 -0300 Subject: Linux-libre 4.4-gnu --- drivers/mtd/spi-nor/Kconfig | 3 +- drivers/mtd/spi-nor/fsl-quadspi.c | 46 +++--- drivers/mtd/spi-nor/nxp-spifi.c | 11 +- drivers/mtd/spi-nor/spi-nor.c | 317 ++++++++++++++++++++++++++++---------- 4 files changed, 258 insertions(+), 119 deletions(-) (limited to 'drivers/mtd/spi-nor') diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 89bf4c1fa..2fe2a7e90 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -23,7 +23,8 @@ config MTD_SPI_NOR_USE_4K_SECTORS config SPI_FSL_QUADSPI tristate "Freescale Quad SPI controller" - depends on ARCH_MXC + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM help This enables support for the Quad SPI controller in master mode. This controller does not support generic SPI. It only supports diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index d32b7e04c..7b10ed413 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -28,6 +28,7 @@ #include #include #include +#include /* Controller needs driver to swap endian */ #define QUADSPI_QUIRK_SWAP_ENDIAN (1 << 0) @@ -154,15 +155,15 @@ #define LUT_MODE 4 #define LUT_MODE2 5 #define LUT_MODE4 6 -#define LUT_READ 7 -#define LUT_WRITE 8 +#define LUT_FSL_READ 7 +#define LUT_FSL_WRITE 8 #define LUT_JMP_ON_CS 9 #define LUT_ADDR_DDR 10 #define LUT_MODE_DDR 11 #define LUT_MODE2_DDR 12 #define LUT_MODE4_DDR 13 -#define LUT_READ_DDR 14 -#define LUT_WRITE_DDR 15 +#define LUT_FSL_READ_DDR 14 +#define LUT_FSL_WRITE_DDR 15 #define LUT_DATA_LEARN 16 /* @@ -259,7 +260,6 @@ static struct fsl_qspi_devtype_data imx6ul_data = { #define FSL_QSPI_MAX_CHIP 4 struct fsl_qspi { - struct mtd_info mtd[FSL_QSPI_MAX_CHIP]; struct spi_nor nor[FSL_QSPI_MAX_CHIP]; void __iomem *iobase; void __iomem *ahb_addr; @@ -366,7 +366,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); - writel(LUT0(DUMMY, PAD1, dummy) | LUT1(READ, PAD4, rxfifo), + writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo), base + QUADSPI_LUT(lut_base + 1)); /* Write enable */ @@ -387,11 +387,11 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); - writel(LUT0(WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); + writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); /* Read Status */ lut_base = SEQID_RDSR * 4; - writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(READ, PAD1, 0x1), + writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1), base + QUADSPI_LUT(lut_base)); /* Erase a sector */ @@ -410,17 +410,17 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* READ ID */ lut_base = SEQID_RDID * 4; - writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(READ, PAD1, 0x8), + writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8), base + QUADSPI_LUT(lut_base)); /* Write Register */ lut_base = SEQID_WRSR * 4; - writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(WRITE, PAD1, 0x2), + writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2), base + QUADSPI_LUT(lut_base)); /* Read Configuration Register */ lut_base = SEQID_RDCR * 4; - writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(READ, PAD1, 0x1), + writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1), base + QUADSPI_LUT(lut_base)); /* Write disable */ @@ -798,8 +798,7 @@ static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) return 0; } -static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len, - int write_enable) +static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct fsl_qspi *q = nor->priv; int ret; @@ -870,7 +869,7 @@ static int fsl_qspi_read(struct spi_nor *nor, loff_t from, } } - dev_dbg(q->dev, "cmd [%x],read from 0x%p, len:%d\n", + dev_dbg(q->dev, "cmd [%x],read from %p, len:%zd\n", cmd, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, len); @@ -888,7 +887,7 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) int ret; dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n", - nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs); + nor->mtd.erasesize / 1024, q->chip_base_addr, (u32)offs); ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0); if (ret) @@ -1006,19 +1005,16 @@ static int fsl_qspi_probe(struct platform_device *pdev) /* iterate the subnodes. */ for_each_available_child_of_node(dev->of_node, np) { - char modalias[40]; - /* skip the holes */ if (!q->has_second_chip) i *= 2; nor = &q->nor[i]; - mtd = &q->mtd[i]; + mtd = &nor->mtd; - nor->mtd = mtd; nor->dev = dev; + nor->flash_node = np; nor->priv = q; - mtd->priv = nor; /* fill the hooks */ nor->read_reg = fsl_qspi_read_reg; @@ -1030,10 +1026,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) nor->prepare = fsl_qspi_prep; nor->unprepare = fsl_qspi_unprep; - ret = of_modalias_node(np, modalias, sizeof(modalias)); - if (ret < 0) - goto mutex_failed; - ret = of_property_read_u32(np, "spi-max-frequency", &q->clk_rate); if (ret < 0) @@ -1042,7 +1034,7 @@ static int fsl_qspi_probe(struct platform_device *pdev) /* set the chip address for READID */ fsl_qspi_set_base_addr(q, nor); - ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); if (ret) goto mutex_failed; @@ -1087,7 +1079,7 @@ last_init_failed: /* skip the holes */ if (!q->has_second_chip) i *= 2; - mtd_device_unregister(&q->mtd[i]); + mtd_device_unregister(&q->nor[i].mtd); } mutex_failed: mutex_destroy(&q->lock); @@ -1107,7 +1099,7 @@ static int fsl_qspi_remove(struct platform_device *pdev) /* skip the holes */ if (!q->has_second_chip) i *= 2; - mtd_device_unregister(&q->mtd[i]); + mtd_device_unregister(&q->nor[i].mtd); } /* disable the hardware */ diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c index 9ad1dd089..9e82098ae 100644 --- a/drivers/mtd/spi-nor/nxp-spifi.c +++ b/drivers/mtd/spi-nor/nxp-spifi.c @@ -60,7 +60,6 @@ struct nxp_spifi { struct clk *clk_reg; void __iomem *io_base; void __iomem *flash_base; - struct mtd_info mtd; struct spi_nor nor; bool memory_mode; u32 mcmd; @@ -150,8 +149,7 @@ static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) return nxp_spifi_wait_for_cmd(spifi); } -static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, - int len, int write_enable) +static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) { struct nxp_spifi *spifi = nor->priv; u32 cmd; @@ -331,9 +329,8 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, writel(ctrl, spifi->io_base + SPIFI_CTRL); - spifi->mtd.priv = &spifi->nor; - spifi->nor.mtd = &spifi->mtd; spifi->nor.dev = spifi->dev; + spifi->nor.flash_node = np; spifi->nor.priv = spifi; spifi->nor.read = nxp_spifi_read; spifi->nor.write = nxp_spifi_write; @@ -365,7 +362,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, } ppdata.of_node = np; - ret = mtd_device_parse_register(&spifi->mtd, NULL, &ppdata, NULL, 0); + ret = mtd_device_parse_register(&spifi->nor.mtd, NULL, &ppdata, NULL, 0); if (ret) { dev_err(spifi->dev, "mtd device parse failed\n"); return ret; @@ -454,7 +451,7 @@ static int nxp_spifi_remove(struct platform_device *pdev) { struct nxp_spifi *spifi = platform_get_drvdata(pdev); - mtd_device_unregister(&spifi->mtd); + mtd_device_unregister(&spifi->nor.mtd); clk_disable_unprepare(spifi->clk_spifi); clk_disable_unprepare(spifi->clk_reg); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index f59aedfe1..32477c4eb 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -16,15 +16,26 @@ #include #include #include +#include -#include #include #include #include #include /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ + +/* + * For everything but full-chip erase; probably could be much smaller, but kept + * around for safety for now + */ +#define DEFAULT_READY_WAIT_JIFFIES (40UL * HZ) + +/* + * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up + * for larger flash + */ +#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) #define SPI_NOR_MAX_ID_LEN 6 @@ -145,7 +156,7 @@ static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) static inline int write_sr(struct spi_nor *nor, u8 val) { nor->cmd_buf[0] = val; - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); } /* @@ -154,7 +165,7 @@ static inline int write_sr(struct spi_nor *nor, u8 val) */ static inline int write_enable(struct spi_nor *nor) { - return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0); + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); } /* @@ -162,7 +173,7 @@ static inline int write_enable(struct spi_nor *nor) */ static inline int write_disable(struct spi_nor *nor) { - return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); } static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) @@ -179,16 +190,16 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, u8 cmd; switch (JEDEC_MFR(info)) { - case CFI_MFR_ST: /* Micron, actually */ + case SNOR_MFR_MICRON: /* Some Micron need WREN command; all will accept it */ need_wren = true; - case CFI_MFR_MACRONIX: - case 0xEF /* winbond */: + case SNOR_MFR_MACRONIX: + case SNOR_MFR_WINBOND: if (need_wren) write_enable(nor); cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; - status = nor->write_reg(nor, cmd, NULL, 0, 0); + status = nor->write_reg(nor, cmd, NULL, 0); if (need_wren) write_disable(nor); @@ -196,7 +207,7 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, default: /* Spansion style */ nor->cmd_buf[0] = enable << 7; - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0); + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); } } static inline int spi_nor_sr_ready(struct spi_nor *nor) @@ -233,12 +244,13 @@ static int spi_nor_ready(struct spi_nor *nor) * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. */ -static int spi_nor_wait_till_ready(struct spi_nor *nor) +static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor, + unsigned long timeout_jiffies) { unsigned long deadline; int timeout = 0, ret; - deadline = jiffies + MAX_READY_WAIT_JIFFIES; + deadline = jiffies + timeout_jiffies; while (!timeout) { if (time_after_eq(jiffies, deadline)) @@ -258,6 +270,12 @@ static int spi_nor_wait_till_ready(struct spi_nor *nor) return -ETIMEDOUT; } +static int spi_nor_wait_till_ready(struct spi_nor *nor) +{ + return spi_nor_wait_till_ready_with_timeout(nor, + DEFAULT_READY_WAIT_JIFFIES); +} + /* * Erase the whole flash memory * @@ -265,9 +283,9 @@ static int spi_nor_wait_till_ready(struct spi_nor *nor) */ static int erase_chip(struct spi_nor *nor) { - dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10)); + dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); - return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0); + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); } static int spi_nor_lock_and_prep(struct spi_nor *nor, enum spi_nor_ops ops) @@ -321,6 +339,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) /* whole-chip erase? */ if (len == mtd->size) { + unsigned long timeout; + write_enable(nor); if (erase_chip(nor)) { @@ -328,7 +348,16 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) goto erase_err; } - ret = spi_nor_wait_till_ready(nor); + /* + * Scale the timeout linearly with the size of the flash, with + * a minimum calibrated to an old 2MB flash. We could try to + * pull these from CFI/SFDP, but these values should be good + * enough for now. + */ + timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES, + CHIP_ERASE_2MB_READY_WAIT_JIFFIES * + (unsigned long)(mtd->size / SZ_2M)); + ret = spi_nor_wait_till_ready_with_timeout(nor, timeout); if (ret) goto erase_err; @@ -371,72 +400,171 @@ erase_err: return ret; } +static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, + uint64_t *len) +{ + struct mtd_info *mtd = &nor->mtd; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + int shift = ffs(mask) - 1; + int pow; + + if (!(sr & mask)) { + /* No protection */ + *ofs = 0; + *len = 0; + } else { + pow = ((sr & mask) ^ mask) >> shift; + *len = mtd->size >> pow; + *ofs = mtd->size - *len; + } +} + +/* + * Return 1 if the entire region is locked, 0 otherwise + */ +static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len, + u8 sr) +{ + loff_t lock_offs; + uint64_t lock_len; + + stm_get_locked_range(nor, sr, &lock_offs, &lock_len); + + return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs); +} + +/* + * Lock a region of the flash. Compatible with ST Micro and similar flash. + * Supports only the block protection bits BP{0,1,2} in the status register + * (SR). Does not support these features found in newer SR bitfields: + * - TB: top/bottom protect - only handle TB=0 (top protect) + * - SEC: sector/block protect - only handle SEC=0 (block protect) + * - CMP: complement protect - only support CMP=0 (range is not complemented) + * + * Sample table portion for 8MB flash (Winbond w25q64fw): + * + * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion + * -------------------------------------------------------------------------- + * X | X | 0 | 0 | 0 | NONE | NONE + * 0 | 0 | 0 | 0 | 1 | 128 KB | Upper 1/64 + * 0 | 0 | 0 | 1 | 0 | 256 KB | Upper 1/32 + * 0 | 0 | 0 | 1 | 1 | 512 KB | Upper 1/16 + * 0 | 0 | 1 | 0 | 0 | 1 MB | Upper 1/8 + * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4 + * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2 + * X | X | 1 | 1 | 1 | 8 MB | ALL + * + * Returns negative on errors, 0 on success. + */ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) { - struct mtd_info *mtd = nor->mtd; - uint32_t offset = ofs; - uint8_t status_old, status_new; - int ret = 0; + struct mtd_info *mtd = &nor->mtd; + u8 status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; status_old = read_sr(nor); - if (offset < mtd->size - (mtd->size / 2)) - status_new = status_old | SR_BP2 | SR_BP1 | SR_BP0; - else if (offset < mtd->size - (mtd->size / 4)) - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; - else if (offset < mtd->size - (mtd->size / 8)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else if (offset < mtd->size - (mtd->size / 16)) - status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; - else if (offset < mtd->size - (mtd->size / 32)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset < mtd->size - (mtd->size / 64)) - status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; - else - status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; + /* SPI NOR always locks to the end */ + if (ofs + len != mtd->size) { + /* Does combined region extend to end? */ + if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len, + status_old)) + return -EINVAL; + len = mtd->size - ofs; + } + + /* + * Need smallest pow such that: + * + * 1 / (2^pow) <= (len / size) + * + * so (assuming power-of-2 size) we do: + * + * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len)) + */ + pow = ilog2(mtd->size) - ilog2(len); + val = mask - (pow << shift); + if (val & ~mask) + return -EINVAL; + /* Don't "lock" with no region! */ + if (!(val & mask)) + return -EINVAL; + + status_new = (status_old & ~mask) | val; /* Only modify protection if it will not unlock other areas */ - if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) > - (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { - write_enable(nor); - ret = write_sr(nor, status_new); - } + if ((status_new & mask) <= (status_old & mask)) + return -EINVAL; - return ret; + write_enable(nor); + return write_sr(nor, status_new); } +/* + * Unlock a region of the flash. See stm_lock() for more info + * + * Returns negative on errors, 0 on success. + */ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) { - struct mtd_info *mtd = nor->mtd; - uint32_t offset = ofs; + struct mtd_info *mtd = &nor->mtd; uint8_t status_old, status_new; - int ret = 0; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; status_old = read_sr(nor); - if (offset+len > mtd->size - (mtd->size / 64)) - status_new = status_old & ~(SR_BP2 | SR_BP1 | SR_BP0); - else if (offset+len > mtd->size - (mtd->size / 32)) - status_new = (status_old & ~(SR_BP2 | SR_BP1)) | SR_BP0; - else if (offset+len > mtd->size - (mtd->size / 16)) - status_new = (status_old & ~(SR_BP2 | SR_BP0)) | SR_BP1; - else if (offset+len > mtd->size - (mtd->size / 8)) - status_new = (status_old & ~SR_BP2) | SR_BP1 | SR_BP0; - else if (offset+len > mtd->size - (mtd->size / 4)) - status_new = (status_old & ~(SR_BP0 | SR_BP1)) | SR_BP2; - else if (offset+len > mtd->size - (mtd->size / 2)) - status_new = (status_old & ~SR_BP1) | SR_BP2 | SR_BP0; - else - status_new = (status_old & ~SR_BP0) | SR_BP2 | SR_BP1; + /* Cannot unlock; would unlock larger region than requested */ + if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize, + status_old)) + return -EINVAL; - /* Only modify protection if it will not lock other areas */ - if ((status_new & (SR_BP2 | SR_BP1 | SR_BP0)) < - (status_old & (SR_BP2 | SR_BP1 | SR_BP0))) { - write_enable(nor); - ret = write_sr(nor, status_new); + /* + * Need largest pow such that: + * + * 1 / (2^pow) >= (len / size) + * + * so (assuming power-of-2 size) we do: + * + * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len)) + */ + pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len)); + if (ofs + len == mtd->size) { + val = 0; /* fully unlocked */ + } else { + val = mask - (pow << shift); + /* Some power-of-two sizes are not supported */ + if (val & ~mask) + return -EINVAL; } - return ret; + status_new = (status_old & ~mask) | val; + + /* Only modify protection if it will not lock other areas */ + if ((status_new & mask) >= (status_old & mask)) + return -EINVAL; + + write_enable(nor); + return write_sr(nor, status_new); +} + +/* + * Check if a region of the flash is (completely) locked. See stm_lock() for + * more info. + * + * Returns 1 if entire region is locked, 0 if any portion is unlocked, and + * negative on errors. + */ +static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len) +{ + int status; + + status = read_sr(nor); + if (status < 0) + return status; + + return stm_is_locked_sr(nor, ofs, len, status); } static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) @@ -469,6 +597,21 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct spi_nor *nor = mtd_to_spi_nor(mtd); + int ret; + + ret = spi_nor_lock_and_prep(nor, SPI_NOR_OPS_UNLOCK); + if (ret) + return ret; + + ret = nor->flash_is_locked(nor, ofs, len); + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); + return ret; +} + /* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ .id = { \ @@ -585,6 +728,7 @@ static const struct flash_info spi_nor_ids[] = { /* Micron */ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, + { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, @@ -618,12 +762,13 @@ static const struct flash_info spi_nor_ids[] = { { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, - { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, - { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, + { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) }, { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) }, - { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K) }, + { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, @@ -635,6 +780,7 @@ static const struct flash_info spi_nor_ids[] = { { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) }, { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) }, { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) }, + { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, @@ -683,10 +829,11 @@ static const struct flash_info spi_nor_ids[] = { { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, - { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, - { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K) }, + { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, @@ -868,8 +1015,7 @@ static int macronix_quad_enable(struct spi_nor *nor) val = read_sr(nor); write_enable(nor); - nor->cmd_buf[0] = val | SR_QUAD_EN_MX; - nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0); + write_sr(nor, val | SR_QUAD_EN_MX); if (spi_nor_wait_till_ready(nor)) return 1; @@ -894,7 +1040,7 @@ static int write_sr_cr(struct spi_nor *nor, u16 val) nor->cmd_buf[0] = val & 0xff; nor->cmd_buf[1] = (val >> 8); - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2, 0); + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2); } static int spansion_quad_enable(struct spi_nor *nor) @@ -936,7 +1082,7 @@ static int micron_quad_enable(struct spi_nor *nor) /* set EVCR, enable quad I/O */ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON; - ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0); + ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1); if (ret < 0) { dev_err(nor->dev, "error while writing EVCR register\n"); return ret; @@ -965,14 +1111,14 @@ static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info) int status; switch (JEDEC_MFR(info)) { - case CFI_MFR_MACRONIX: + case SNOR_MFR_MACRONIX: status = macronix_quad_enable(nor); if (status) { dev_err(nor->dev, "Macronix quad-read not enabled\n"); return -EINVAL; } return status; - case CFI_MFR_ST: + case SNOR_MFR_MICRON: status = micron_quad_enable(nor); if (status) { dev_err(nor->dev, "Micron quad-read not enabled\n"); @@ -1004,8 +1150,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) { const struct flash_info *info = NULL; struct device *dev = nor->dev; - struct mtd_info *mtd = nor->mtd; - struct device_node *np = dev->of_node; + struct mtd_info *mtd = &nor->mtd; + struct device_node *np = nor->flash_node; int ret; int i; @@ -1048,19 +1194,20 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) mutex_init(&nor->lock); /* - * Atmel, SST and Intel/Numonyx serial nor tend to power - * up with the software protection bits set + * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up + * with the software protection bits set */ - if (JEDEC_MFR(info) == CFI_MFR_ATMEL || - JEDEC_MFR(info) == CFI_MFR_INTEL || - JEDEC_MFR(info) == CFI_MFR_SST) { + if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || + JEDEC_MFR(info) == SNOR_MFR_INTEL || + JEDEC_MFR(info) == SNOR_MFR_SST) { write_enable(nor); write_sr(nor, 0); } if (!mtd->name) mtd->name = dev_name(dev); + mtd->priv = nor; mtd->type = MTD_NORFLASH; mtd->writesize = 1; mtd->flags = MTD_CAP_NORFLASH; @@ -1068,15 +1215,17 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; - /* nor protection support for STmicro chips */ - if (JEDEC_MFR(info) == CFI_MFR_ST) { + /* NOR protection support for STmicro/Micron chips and similar */ + if (JEDEC_MFR(info) == SNOR_MFR_MICRON) { nor->flash_lock = stm_lock; nor->flash_unlock = stm_unlock; + nor->flash_is_locked = stm_is_locked; } - if (nor->flash_lock && nor->flash_unlock) { + if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) { mtd->_lock = spi_nor_lock; mtd->_unlock = spi_nor_unlock; + mtd->_is_locked = spi_nor_is_locked; } /* sst nor chips use AAI word program */ @@ -1163,7 +1312,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) else if (mtd->size > 0x1000000) { /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4; - if (JEDEC_MFR(info) == CFI_MFR_AMD) { + if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) { /* Dedicated 4-byte command set */ switch (nor->flash_read) { case SPI_NOR_QUAD: -- cgit v1.2.3-54-g00ecf