From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/net/bonding/bond_3ad.c | 2570 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2570 insertions(+) create mode 100644 drivers/net/bonding/bond_3ad.c (limited to 'drivers/net/bonding/bond_3ad.c') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c new file mode 100644 index 000000000..fbd54f0e3 --- /dev/null +++ b/drivers/net/bonding/bond_3ad.c @@ -0,0 +1,2570 @@ +/* + * Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* General definitions */ +#define AD_SHORT_TIMEOUT 1 +#define AD_LONG_TIMEOUT 0 +#define AD_STANDBY 0x2 +#define AD_MAX_TX_IN_SECOND 3 +#define AD_COLLECTOR_MAX_DELAY 0 + +/* Timer definitions (43.4.4 in the 802.3ad standard) */ +#define AD_FAST_PERIODIC_TIME 1 +#define AD_SLOW_PERIODIC_TIME 30 +#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME) +#define AD_LONG_TIMEOUT_TIME (3*AD_SLOW_PERIODIC_TIME) +#define AD_CHURN_DETECTION_TIME 60 +#define AD_AGGREGATE_WAIT_TIME 2 + +/* Port state definitions (43.4.2.2 in the 802.3ad standard) */ +#define AD_STATE_LACP_ACTIVITY 0x1 +#define AD_STATE_LACP_TIMEOUT 0x2 +#define AD_STATE_AGGREGATION 0x4 +#define AD_STATE_SYNCHRONIZATION 0x8 +#define AD_STATE_COLLECTING 0x10 +#define AD_STATE_DISTRIBUTING 0x20 +#define AD_STATE_DEFAULTED 0x40 +#define AD_STATE_EXPIRED 0x80 + +/* Port Variables definitions used by the State Machines (43.4.7 in the + * 802.3ad standard) + */ +#define AD_PORT_BEGIN 0x1 +#define AD_PORT_LACP_ENABLED 0x2 +#define AD_PORT_ACTOR_CHURN 0x4 +#define AD_PORT_PARTNER_CHURN 0x8 +#define AD_PORT_READY 0x10 +#define AD_PORT_READY_N 0x20 +#define AD_PORT_MATCHED 0x40 +#define AD_PORT_STANDBY 0x80 +#define AD_PORT_SELECTED 0x100 +#define AD_PORT_MOVED 0x200 +#define AD_PORT_CHURNED (AD_PORT_ACTOR_CHURN | AD_PORT_PARTNER_CHURN) + +/* Port Key definitions + * key is determined according to the link speed, duplex and + * user key (which is yet not supported) + * -------------------------------------------------------------- + * Port key : | User key | Speed | Duplex | + * -------------------------------------------------------------- + * 16 6 1 0 + */ +#define AD_DUPLEX_KEY_MASKS 0x1 +#define AD_SPEED_KEY_MASKS 0x3E +#define AD_USER_KEY_MASKS 0xFFC0 + +enum ad_link_speed_type { + AD_LINK_SPEED_1MBPS = 1, + AD_LINK_SPEED_10MBPS, + AD_LINK_SPEED_100MBPS, + AD_LINK_SPEED_1000MBPS, + AD_LINK_SPEED_2500MBPS, + AD_LINK_SPEED_10000MBPS, + AD_LINK_SPEED_20000MBPS, + AD_LINK_SPEED_40000MBPS, + AD_LINK_SPEED_56000MBPS +}; + +/* compare MAC addresses */ +#define MAC_ADDRESS_EQUAL(A, B) \ + ether_addr_equal_64bits((const u8 *)A, (const u8 *)B) + +static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } }; +static u16 ad_ticks_per_sec; +static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000; + +static const u8 lacpdu_mcast_addr[ETH_ALEN] = MULTICAST_LACPDU_ADDR; + +/* ================= main 802.3ad protocol functions ================== */ +static int ad_lacpdu_send(struct port *port); +static int ad_marker_send(struct port *port, struct bond_marker *marker); +static void ad_mux_machine(struct port *port, bool *update_slave_arr); +static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port); +static void ad_tx_machine(struct port *port); +static void ad_periodic_machine(struct port *port); +static void ad_port_selection_logic(struct port *port, bool *update_slave_arr); +static void ad_agg_selection_logic(struct aggregator *aggregator, + bool *update_slave_arr); +static void ad_clear_agg(struct aggregator *aggregator); +static void ad_initialize_agg(struct aggregator *aggregator); +static void ad_initialize_port(struct port *port, int lacp_fast); +static void ad_enable_collecting_distributing(struct port *port, + bool *update_slave_arr); +static void ad_disable_collecting_distributing(struct port *port, + bool *update_slave_arr); +static void ad_marker_info_received(struct bond_marker *marker_info, + struct port *port); +static void ad_marker_response_received(struct bond_marker *marker, + struct port *port); + + +/* ================= api to bonding and kernel code ================== */ + +/** + * __get_bond_by_port - get the port's bonding struct + * @port: the port we're looking at + * + * Return @port's bonding struct, or %NULL if it can't be found. + */ +static inline struct bonding *__get_bond_by_port(struct port *port) +{ + if (port->slave == NULL) + return NULL; + + return bond_get_bond_by_slave(port->slave); +} + +/** + * __get_first_agg - get the first aggregator in the bond + * @bond: the bond we're looking at + * + * Return the aggregator of the first slave in @bond, or %NULL if it can't be + * found. + * The caller must hold RCU or RTNL lock. + */ +static inline struct aggregator *__get_first_agg(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + struct slave *first_slave; + struct aggregator *agg; + + /* If there's no bond for this port, or bond has no slaves */ + if (bond == NULL) + return NULL; + + rcu_read_lock(); + first_slave = bond_first_slave_rcu(bond); + agg = first_slave ? &(SLAVE_AD_INFO(first_slave)->aggregator) : NULL; + rcu_read_unlock(); + + return agg; +} + +/** + * __agg_has_partner - see if we have a partner + * @agg: the agregator we're looking at + * + * Return nonzero if aggregator has a partner (denoted by a non-zero ether + * address for the partner). Return 0 if not. + */ +static inline int __agg_has_partner(struct aggregator *agg) +{ + return !is_zero_ether_addr(agg->partner_system.mac_addr_value); +} + +/** + * __disable_port - disable the port's slave + * @port: the port we're looking at + */ +static inline void __disable_port(struct port *port) +{ + bond_set_slave_inactive_flags(port->slave, BOND_SLAVE_NOTIFY_LATER); +} + +/** + * __enable_port - enable the port's slave, if it's up + * @port: the port we're looking at + */ +static inline void __enable_port(struct port *port) +{ + struct slave *slave = port->slave; + + if ((slave->link == BOND_LINK_UP) && bond_slave_is_up(slave)) + bond_set_slave_active_flags(slave, BOND_SLAVE_NOTIFY_LATER); +} + +/** + * __port_is_enabled - check if the port's slave is in active state + * @port: the port we're looking at + */ +static inline int __port_is_enabled(struct port *port) +{ + return bond_is_active_slave(port->slave); +} + +/** + * __get_agg_selection_mode - get the aggregator selection mode + * @port: the port we're looking at + * + * Get the aggregator selection mode. Can be %STABLE, %BANDWIDTH or %COUNT. + */ +static inline u32 __get_agg_selection_mode(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + + if (bond == NULL) + return BOND_AD_STABLE; + + return bond->params.ad_select; +} + +/** + * __check_agg_selection_timer - check if the selection timer has expired + * @port: the port we're looking at + */ +static inline int __check_agg_selection_timer(struct port *port) +{ + struct bonding *bond = __get_bond_by_port(port); + + if (bond == NULL) + return 0; + + return BOND_AD_INFO(bond).agg_select_timer ? 1 : 0; +} + +/** + * __get_link_speed - get a port's speed + * @port: the port we're looking at + * + * Return @port's speed in 802.3ad enum format. i.e. one of: + * 0, + * %AD_LINK_SPEED_10MBPS, + * %AD_LINK_SPEED_100MBPS, + * %AD_LINK_SPEED_1000MBPS, + * %AD_LINK_SPEED_2500MBPS, + * %AD_LINK_SPEED_10000MBPS + * %AD_LINK_SPEED_20000MBPS + * %AD_LINK_SPEED_40000MBPS + * %AD_LINK_SPEED_56000MBPS + */ +static u16 __get_link_speed(struct port *port) +{ + struct slave *slave = port->slave; + u16 speed; + + /* this if covers only a special case: when the configuration starts + * with link down, it sets the speed to 0. + * This is done in spite of the fact that the e100 driver reports 0 + * to be compatible with MVT in the future. + */ + if (slave->link != BOND_LINK_UP) + speed = 0; + else { + switch (slave->speed) { + case SPEED_10: + speed = AD_LINK_SPEED_10MBPS; + break; + + case SPEED_100: + speed = AD_LINK_SPEED_100MBPS; + break; + + case SPEED_1000: + speed = AD_LINK_SPEED_1000MBPS; + break; + + case SPEED_2500: + speed = AD_LINK_SPEED_2500MBPS; + break; + + case SPEED_10000: + speed = AD_LINK_SPEED_10000MBPS; + break; + + case SPEED_20000: + speed = AD_LINK_SPEED_20000MBPS; + break; + + case SPEED_40000: + speed = AD_LINK_SPEED_40000MBPS; + break; + + case SPEED_56000: + speed = AD_LINK_SPEED_56000MBPS; + break; + + default: + /* unknown speed value from ethtool. shouldn't happen */ + speed = 0; + break; + } + } + + netdev_dbg(slave->bond->dev, "Port %d Received link speed %d update from adapter\n", + port->actor_port_number, speed); + return speed; +} + +/** + * __get_duplex - get a port's duplex + * @port: the port we're looking at + * + * Return @port's duplex in 802.3ad bitmask format. i.e.: + * 0x01 if in full duplex + * 0x00 otherwise + */ +static u8 __get_duplex(struct port *port) +{ + struct slave *slave = port->slave; + u8 retval; + + /* handling a special case: when the configuration starts with + * link down, it sets the duplex to 0. + */ + if (slave->link != BOND_LINK_UP) { + retval = 0x0; + } else { + switch (slave->duplex) { + case DUPLEX_FULL: + retval = 0x1; + netdev_dbg(slave->bond->dev, "Port %d Received status full duplex update from adapter\n", + port->actor_port_number); + break; + case DUPLEX_HALF: + default: + retval = 0x0; + netdev_dbg(slave->bond->dev, "Port %d Received status NOT full duplex update from adapter\n", + port->actor_port_number); + break; + } + } + return retval; +} + +/* Conversions */ + +/** + * __ad_timer_to_ticks - convert a given timer type to AD module ticks + * @timer_type: which timer to operate + * @par: timer parameter. see below + * + * If @timer_type is %current_while_timer, @par indicates long/short timer. + * If @timer_type is %periodic_timer, @par is one of %FAST_PERIODIC_TIME, + * %SLOW_PERIODIC_TIME. + */ +static u16 __ad_timer_to_ticks(u16 timer_type, u16 par) +{ + u16 retval = 0; /* to silence the compiler */ + + switch (timer_type) { + case AD_CURRENT_WHILE_TIMER: /* for rx machine usage */ + if (par) + retval = (AD_SHORT_TIMEOUT_TIME*ad_ticks_per_sec); + else + retval = (AD_LONG_TIMEOUT_TIME*ad_ticks_per_sec); + break; + case AD_ACTOR_CHURN_TIMER: /* for local churn machine */ + retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec); + break; + case AD_PERIODIC_TIMER: /* for periodic machine */ + retval = (par*ad_ticks_per_sec); /* long timeout */ + break; + case AD_PARTNER_CHURN_TIMER: /* for remote churn machine */ + retval = (AD_CHURN_DETECTION_TIME*ad_ticks_per_sec); + break; + case AD_WAIT_WHILE_TIMER: /* for selection machine */ + retval = (AD_AGGREGATE_WAIT_TIME*ad_ticks_per_sec); + break; + } + + return retval; +} + + +/* ================= ad_rx_machine helper functions ================== */ + +/** + * __choose_matched - update a port's matched variable from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Update the value of the matched variable, using parameter values from a + * newly received lacpdu. Parameter values for the partner carried in the + * received PDU are compared with the corresponding operational parameter + * values for the actor. Matched is set to TRUE if all of these parameters + * match and the PDU parameter partner_state.aggregation has the same value as + * actor_oper_port_state.aggregation and lacp will actively maintain the link + * in the aggregation. Matched is also set to TRUE if the value of + * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates + * an individual link and lacp will actively maintain the link. Otherwise, + * matched is set to FALSE. LACP is considered to be actively maintaining the + * link if either the PDU's actor_state.lacp_activity variable is TRUE or both + * the actor's actor_oper_port_state.lacp_activity and the PDU's + * partner_state.lacp_activity variables are TRUE. + * + * Note: the AD_PORT_MATCHED "variable" is not specified by 802.3ad; it is + * used here to implement the language from 802.3ad 43.4.9 that requires + * recordPDU to "match" the LACPDU parameters to the stored values. + */ +static void __choose_matched(struct lacpdu *lacpdu, struct port *port) +{ + /* check if all parameters are alike + * or this is individual link(aggregation == FALSE) + * then update the state machine Matched variable. + */ + if (((ntohs(lacpdu->partner_port) == port->actor_port_number) && + (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) && + MAC_ADDRESS_EQUAL(&(lacpdu->partner_system), &(port->actor_system)) && + (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) && + (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) && + ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) || + ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0) + ) { + port->sm_vars |= AD_PORT_MATCHED; + } else { + port->sm_vars &= ~AD_PORT_MATCHED; + } +} + +/** + * __record_pdu - record parameters from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Record the parameter values for the Actor carried in a received lacpdu as + * the current partner operational parameter values and sets + * actor_oper_port_state.defaulted to FALSE. + */ +static void __record_pdu(struct lacpdu *lacpdu, struct port *port) +{ + if (lacpdu && port) { + struct port_params *partner = &port->partner_oper; + + __choose_matched(lacpdu, port); + /* record the new parameter values for the partner + * operational + */ + partner->port_number = ntohs(lacpdu->actor_port); + partner->port_priority = ntohs(lacpdu->actor_port_priority); + partner->system = lacpdu->actor_system; + partner->system_priority = ntohs(lacpdu->actor_system_priority); + partner->key = ntohs(lacpdu->actor_key); + partner->port_state = lacpdu->actor_state; + + /* set actor_oper_port_state.defaulted to FALSE */ + port->actor_oper_port_state &= ~AD_STATE_DEFAULTED; + + /* set the partner sync. to on if the partner is sync, + * and the port is matched + */ + if ((port->sm_vars & AD_PORT_MATCHED) && + (lacpdu->actor_state & AD_STATE_SYNCHRONIZATION)) { + partner->port_state |= AD_STATE_SYNCHRONIZATION; + pr_debug("%s partner sync=1\n", port->slave->dev->name); + } else { + partner->port_state &= ~AD_STATE_SYNCHRONIZATION; + pr_debug("%s partner sync=0\n", port->slave->dev->name); + } + } +} + +/** + * __record_default - record default parameters + * @port: the port we're looking at + * + * This function records the default parameter values for the partner carried + * in the Partner Admin parameters as the current partner operational parameter + * values and sets actor_oper_port_state.defaulted to TRUE. + */ +static void __record_default(struct port *port) +{ + if (port) { + /* record the partner admin parameters */ + memcpy(&port->partner_oper, &port->partner_admin, + sizeof(struct port_params)); + + /* set actor_oper_port_state.defaulted to true */ + port->actor_oper_port_state |= AD_STATE_DEFAULTED; + } +} + +/** + * __update_selected - update a port's Selected variable from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Update the value of the selected variable, using parameter values from a + * newly received lacpdu. The parameter values for the Actor carried in the + * received PDU are compared with the corresponding operational parameter + * values for the ports partner. If one or more of the comparisons shows that + * the value(s) received in the PDU differ from the current operational values, + * then selected is set to FALSE and actor_oper_port_state.synchronization is + * set to out_of_sync. Otherwise, selected remains unchanged. + */ +static void __update_selected(struct lacpdu *lacpdu, struct port *port) +{ + if (lacpdu && port) { + const struct port_params *partner = &port->partner_oper; + + /* check if any parameter is different then + * update the state machine selected variable. + */ + if (ntohs(lacpdu->actor_port) != partner->port_number || + ntohs(lacpdu->actor_port_priority) != partner->port_priority || + !MAC_ADDRESS_EQUAL(&lacpdu->actor_system, &partner->system) || + ntohs(lacpdu->actor_system_priority) != partner->system_priority || + ntohs(lacpdu->actor_key) != partner->key || + (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) { + port->sm_vars &= ~AD_PORT_SELECTED; + } + } +} + +/** + * __update_default_selected - update a port's Selected variable from Partner + * @port: the port we're looking at + * + * This function updates the value of the selected variable, using the partner + * administrative parameter values. The administrative values are compared with + * the corresponding operational parameter values for the partner. If one or + * more of the comparisons shows that the administrative value(s) differ from + * the current operational values, then Selected is set to FALSE and + * actor_oper_port_state.synchronization is set to OUT_OF_SYNC. Otherwise, + * Selected remains unchanged. + */ +static void __update_default_selected(struct port *port) +{ + if (port) { + const struct port_params *admin = &port->partner_admin; + const struct port_params *oper = &port->partner_oper; + + /* check if any parameter is different then + * update the state machine selected variable. + */ + if (admin->port_number != oper->port_number || + admin->port_priority != oper->port_priority || + !MAC_ADDRESS_EQUAL(&admin->system, &oper->system) || + admin->system_priority != oper->system_priority || + admin->key != oper->key || + (admin->port_state & AD_STATE_AGGREGATION) + != (oper->port_state & AD_STATE_AGGREGATION)) { + port->sm_vars &= ~AD_PORT_SELECTED; + } + } +} + +/** + * __update_ntt - update a port's ntt variable from a received lacpdu + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * Updates the value of the ntt variable, using parameter values from a newly + * received lacpdu. The parameter values for the partner carried in the + * received PDU are compared with the corresponding operational parameter + * values for the Actor. If one or more of the comparisons shows that the + * value(s) received in the PDU differ from the current operational values, + * then ntt is set to TRUE. Otherwise, ntt remains unchanged. + */ +static void __update_ntt(struct lacpdu *lacpdu, struct port *port) +{ + /* validate lacpdu and port */ + if (lacpdu && port) { + /* check if any parameter is different then + * update the port->ntt. + */ + if ((ntohs(lacpdu->partner_port) != port->actor_port_number) || + (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) || + !MAC_ADDRESS_EQUAL(&(lacpdu->partner_system), &(port->actor_system)) || + (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) || + (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) || + ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) || + ((lacpdu->partner_state & AD_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)) || + ((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) || + ((lacpdu->partner_state & AD_STATE_AGGREGATION) != (port->actor_oper_port_state & AD_STATE_AGGREGATION)) + ) { + port->ntt = true; + } + } +} + +/** + * __agg_ports_are_ready - check if all ports in an aggregator are ready + * @aggregator: the aggregator we're looking at + * + */ +static int __agg_ports_are_ready(struct aggregator *aggregator) +{ + struct port *port; + int retval = 1; + + if (aggregator) { + /* scan all ports in this aggregator to verfy if they are + * all ready. + */ + for (port = aggregator->lag_ports; + port; + port = port->next_port_in_aggregator) { + if (!(port->sm_vars & AD_PORT_READY_N)) { + retval = 0; + break; + } + } + } + + return retval; +} + +/** + * __set_agg_ports_ready - set value of Ready bit in all ports of an aggregator + * @aggregator: the aggregator we're looking at + * @val: Should the ports' ready bit be set on or off + * + */ +static void __set_agg_ports_ready(struct aggregator *aggregator, int val) +{ + struct port *port; + + for (port = aggregator->lag_ports; port; + port = port->next_port_in_aggregator) { + if (val) + port->sm_vars |= AD_PORT_READY; + else + port->sm_vars &= ~AD_PORT_READY; + } +} + +/** + * __get_agg_bandwidth - get the total bandwidth of an aggregator + * @aggregator: the aggregator we're looking at + * + */ +static u32 __get_agg_bandwidth(struct aggregator *aggregator) +{ + u32 bandwidth = 0; + + if (aggregator->num_of_ports) { + switch (__get_link_speed(aggregator->lag_ports)) { + case AD_LINK_SPEED_1MBPS: + bandwidth = aggregator->num_of_ports; + break; + case AD_LINK_SPEED_10MBPS: + bandwidth = aggregator->num_of_ports * 10; + break; + case AD_LINK_SPEED_100MBPS: + bandwidth = aggregator->num_of_ports * 100; + break; + case AD_LINK_SPEED_1000MBPS: + bandwidth = aggregator->num_of_ports * 1000; + break; + case AD_LINK_SPEED_2500MBPS: + bandwidth = aggregator->num_of_ports * 2500; + break; + case AD_LINK_SPEED_10000MBPS: + bandwidth = aggregator->num_of_ports * 10000; + break; + case AD_LINK_SPEED_20000MBPS: + bandwidth = aggregator->num_of_ports * 20000; + break; + case AD_LINK_SPEED_40000MBPS: + bandwidth = aggregator->num_of_ports * 40000; + break; + case AD_LINK_SPEED_56000MBPS: + bandwidth = aggregator->num_of_ports * 56000; + break; + default: + bandwidth = 0; /* to silence the compiler */ + } + } + return bandwidth; +} + +/** + * __get_active_agg - get the current active aggregator + * @aggregator: the aggregator we're looking at + * + * Caller must hold RCU lock. + */ +static struct aggregator *__get_active_agg(struct aggregator *aggregator) +{ + struct bonding *bond = aggregator->slave->bond; + struct list_head *iter; + struct slave *slave; + + bond_for_each_slave_rcu(bond, slave, iter) + if (SLAVE_AD_INFO(slave)->aggregator.is_active) + return &(SLAVE_AD_INFO(slave)->aggregator); + + return NULL; +} + +/** + * __update_lacpdu_from_port - update a port's lacpdu fields + * @port: the port we're looking at + */ +static inline void __update_lacpdu_from_port(struct port *port) +{ + struct lacpdu *lacpdu = &port->lacpdu; + const struct port_params *partner = &port->partner_oper; + + /* update current actual Actor parameters + * lacpdu->subtype initialized + * lacpdu->version_number initialized + * lacpdu->tlv_type_actor_info initialized + * lacpdu->actor_information_length initialized + */ + + lacpdu->actor_system_priority = htons(port->actor_system_priority); + lacpdu->actor_system = port->actor_system; + lacpdu->actor_key = htons(port->actor_oper_port_key); + lacpdu->actor_port_priority = htons(port->actor_port_priority); + lacpdu->actor_port = htons(port->actor_port_number); + lacpdu->actor_state = port->actor_oper_port_state; + pr_debug("update lacpdu: %s, actor port state %x\n", + port->slave->dev->name, port->actor_oper_port_state); + + /* lacpdu->reserved_3_1 initialized + * lacpdu->tlv_type_partner_info initialized + * lacpdu->partner_information_length initialized + */ + + lacpdu->partner_system_priority = htons(partner->system_priority); + lacpdu->partner_system = partner->system; + lacpdu->partner_key = htons(partner->key); + lacpdu->partner_port_priority = htons(partner->port_priority); + lacpdu->partner_port = htons(partner->port_number); + lacpdu->partner_state = partner->port_state; + + /* lacpdu->reserved_3_2 initialized + * lacpdu->tlv_type_collector_info initialized + * lacpdu->collector_information_length initialized + * collector_max_delay initialized + * reserved_12[12] initialized + * tlv_type_terminator initialized + * terminator_length initialized + * reserved_50[50] initialized + */ +} + +/* ================= main 802.3ad protocol code ========================= */ + +/** + * ad_lacpdu_send - send out a lacpdu packet on a given port + * @port: the port we're looking at + * + * Returns: 0 on success + * < 0 on error + */ +static int ad_lacpdu_send(struct port *port) +{ + struct slave *slave = port->slave; + struct sk_buff *skb; + struct lacpdu_header *lacpdu_header; + int length = sizeof(struct lacpdu_header); + + skb = dev_alloc_skb(length); + if (!skb) + return -ENOMEM; + + skb->dev = slave->dev; + skb_reset_mac_header(skb); + skb->network_header = skb->mac_header + ETH_HLEN; + skb->protocol = PKT_TYPE_LACPDU; + skb->priority = TC_PRIO_CONTROL; + + lacpdu_header = (struct lacpdu_header *)skb_put(skb, length); + + ether_addr_copy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr); + /* Note: source address is set to be the member's PERMANENT address, + * because we use it to identify loopback lacpdus in receive. + */ + ether_addr_copy(lacpdu_header->hdr.h_source, slave->perm_hwaddr); + lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU; + + lacpdu_header->lacpdu = port->lacpdu; + + dev_queue_xmit(skb); + + return 0; +} + +/** + * ad_marker_send - send marker information/response on a given port + * @port: the port we're looking at + * @marker: marker data to send + * + * Returns: 0 on success + * < 0 on error + */ +static int ad_marker_send(struct port *port, struct bond_marker *marker) +{ + struct slave *slave = port->slave; + struct sk_buff *skb; + struct bond_marker_header *marker_header; + int length = sizeof(struct bond_marker_header); + + skb = dev_alloc_skb(length + 16); + if (!skb) + return -ENOMEM; + + skb_reserve(skb, 16); + + skb->dev = slave->dev; + skb_reset_mac_header(skb); + skb->network_header = skb->mac_header + ETH_HLEN; + skb->protocol = PKT_TYPE_LACPDU; + + marker_header = (struct bond_marker_header *)skb_put(skb, length); + + ether_addr_copy(marker_header->hdr.h_dest, lacpdu_mcast_addr); + /* Note: source address is set to be the member's PERMANENT address, + * because we use it to identify loopback MARKERs in receive. + */ + ether_addr_copy(marker_header->hdr.h_source, slave->perm_hwaddr); + marker_header->hdr.h_proto = PKT_TYPE_LACPDU; + + marker_header->marker = *marker; + + dev_queue_xmit(skb); + + return 0; +} + +/** + * ad_mux_machine - handle a port's mux state machine + * @port: the port we're looking at + * @update_slave_arr: Does slave array need update? + */ +static void ad_mux_machine(struct port *port, bool *update_slave_arr) +{ + mux_states_t last_state; + + /* keep current State Machine state to compare later if it was + * changed + */ + last_state = port->sm_mux_state; + + if (port->sm_vars & AD_PORT_BEGIN) { + port->sm_mux_state = AD_MUX_DETACHED; + } else { + switch (port->sm_mux_state) { + case AD_MUX_DETACHED: + if ((port->sm_vars & AD_PORT_SELECTED) + || (port->sm_vars & AD_PORT_STANDBY)) + /* if SELECTED or STANDBY */ + port->sm_mux_state = AD_MUX_WAITING; + break; + case AD_MUX_WAITING: + /* if SELECTED == FALSE return to DETACH state */ + if (!(port->sm_vars & AD_PORT_SELECTED)) { + port->sm_vars &= ~AD_PORT_READY_N; + /* in order to withhold the Selection Logic to + * check all ports READY_N value every callback + * cycle to update ready variable, we check + * READY_N and update READY here + */ + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + port->sm_mux_state = AD_MUX_DETACHED; + break; + } + + /* check if the wait_while_timer expired */ + if (port->sm_mux_timer_counter + && !(--port->sm_mux_timer_counter)) + port->sm_vars |= AD_PORT_READY_N; + + /* in order to withhold the selection logic to check + * all ports READY_N value every callback cycle to + * update ready variable, we check READY_N and update + * READY here + */ + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + + /* if the wait_while_timer expired, and the port is + * in READY state, move to ATTACHED state + */ + if ((port->sm_vars & AD_PORT_READY) + && !port->sm_mux_timer_counter) + port->sm_mux_state = AD_MUX_ATTACHED; + break; + case AD_MUX_ATTACHED: + /* check also if agg_select_timer expired (so the + * edable port will take place only after this timer) + */ + if ((port->sm_vars & AD_PORT_SELECTED) && + (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) && + !__check_agg_selection_timer(port)) { + if (port->aggregator->is_active) + port->sm_mux_state = + AD_MUX_COLLECTING_DISTRIBUTING; + } else if (!(port->sm_vars & AD_PORT_SELECTED) || + (port->sm_vars & AD_PORT_STANDBY)) { + /* if UNSELECTED or STANDBY */ + port->sm_vars &= ~AD_PORT_READY_N; + /* in order to withhold the selection logic to + * check all ports READY_N value every callback + * cycle to update ready variable, we check + * READY_N and update READY here + */ + __set_agg_ports_ready(port->aggregator, __agg_ports_are_ready(port->aggregator)); + port->sm_mux_state = AD_MUX_DETACHED; + } else if (port->aggregator->is_active) { + port->actor_oper_port_state |= + AD_STATE_SYNCHRONIZATION; + } + break; + case AD_MUX_COLLECTING_DISTRIBUTING: + if (!(port->sm_vars & AD_PORT_SELECTED) || + (port->sm_vars & AD_PORT_STANDBY) || + !(port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) || + !(port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) { + port->sm_mux_state = AD_MUX_ATTACHED; + } else { + /* if port state hasn't changed make + * sure that a collecting distributing + * port in an active aggregator is enabled + */ + if (port->aggregator && + port->aggregator->is_active && + !__port_is_enabled(port)) { + + __enable_port(port); + } + } + break; + default: + break; + } + } + + /* check if the state machine was changed */ + if (port->sm_mux_state != last_state) { + pr_debug("Mux Machine: Port=%d (%s), Last State=%d, Curr State=%d\n", + port->actor_port_number, + port->slave->dev->name, + last_state, + port->sm_mux_state); + switch (port->sm_mux_state) { + case AD_MUX_DETACHED: + port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION; + ad_disable_collecting_distributing(port, + update_slave_arr); + port->actor_oper_port_state &= ~AD_STATE_COLLECTING; + port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING; + port->ntt = true; + break; + case AD_MUX_WAITING: + port->sm_mux_timer_counter = __ad_timer_to_ticks(AD_WAIT_WHILE_TIMER, 0); + break; + case AD_MUX_ATTACHED: + if (port->aggregator->is_active) + port->actor_oper_port_state |= + AD_STATE_SYNCHRONIZATION; + else + port->actor_oper_port_state &= + ~AD_STATE_SYNCHRONIZATION; + port->actor_oper_port_state &= ~AD_STATE_COLLECTING; + port->actor_oper_port_state &= ~AD_STATE_DISTRIBUTING; + ad_disable_collecting_distributing(port, + update_slave_arr); + port->ntt = true; + break; + case AD_MUX_COLLECTING_DISTRIBUTING: + port->actor_oper_port_state |= AD_STATE_COLLECTING; + port->actor_oper_port_state |= AD_STATE_DISTRIBUTING; + port->actor_oper_port_state |= AD_STATE_SYNCHRONIZATION; + ad_enable_collecting_distributing(port, + update_slave_arr); + port->ntt = true; + break; + default: + break; + } + } +} + +/** + * ad_rx_machine - handle a port's rx State Machine + * @lacpdu: the lacpdu we've received + * @port: the port we're looking at + * + * If lacpdu arrived, stop previous timer (if exists) and set the next state as + * CURRENT. If timer expired set the state machine in the proper state. + * In other cases, this function checks if we need to switch to other state. + */ +static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port) +{ + rx_states_t last_state; + + /* keep current State Machine state to compare later if it was + * changed + */ + last_state = port->sm_rx_state; + + /* check if state machine should change state */ + + /* first, check if port was reinitialized */ + if (port->sm_vars & AD_PORT_BEGIN) { + port->sm_rx_state = AD_RX_INITIALIZE; + port->sm_vars |= AD_PORT_CHURNED; + /* check if port is not enabled */ + } else if (!(port->sm_vars & AD_PORT_BEGIN) + && !port->is_enabled && !(port->sm_vars & AD_PORT_MOVED)) + port->sm_rx_state = AD_RX_PORT_DISABLED; + /* check if new lacpdu arrived */ + else if (lacpdu && ((port->sm_rx_state == AD_RX_EXPIRED) || + (port->sm_rx_state == AD_RX_DEFAULTED) || + (port->sm_rx_state == AD_RX_CURRENT))) { + if (port->sm_rx_state != AD_RX_CURRENT) + port->sm_vars |= AD_PORT_CHURNED; + port->sm_rx_timer_counter = 0; + port->sm_rx_state = AD_RX_CURRENT; + } else { + /* if timer is on, and if it is expired */ + if (port->sm_rx_timer_counter && + !(--port->sm_rx_timer_counter)) { + switch (port->sm_rx_state) { + case AD_RX_EXPIRED: + port->sm_rx_state = AD_RX_DEFAULTED; + break; + case AD_RX_CURRENT: + port->sm_rx_state = AD_RX_EXPIRED; + break; + default: + break; + } + } else { + /* if no lacpdu arrived and no timer is on */ + switch (port->sm_rx_state) { + case AD_RX_PORT_DISABLED: + if (port->sm_vars & AD_PORT_MOVED) + port->sm_rx_state = AD_RX_INITIALIZE; + else if (port->is_enabled + && (port->sm_vars + & AD_PORT_LACP_ENABLED)) + port->sm_rx_state = AD_RX_EXPIRED; + else if (port->is_enabled + && ((port->sm_vars + & AD_PORT_LACP_ENABLED) == 0)) + port->sm_rx_state = AD_RX_LACP_DISABLED; + break; + default: + break; + + } + } + } + + /* check if the State machine was changed or new lacpdu arrived */ + if ((port->sm_rx_state != last_state) || (lacpdu)) { + pr_debug("Rx Machine: Port=%d (%s), Last State=%d, Curr State=%d\n", + port->actor_port_number, + port->slave->dev->name, + last_state, + port->sm_rx_state); + switch (port->sm_rx_state) { + case AD_RX_INITIALIZE: + if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS)) + port->sm_vars &= ~AD_PORT_LACP_ENABLED; + else + port->sm_vars |= AD_PORT_LACP_ENABLED; + port->sm_vars &= ~AD_PORT_SELECTED; + __record_default(port); + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + port->sm_vars &= ~AD_PORT_MOVED; + port->sm_rx_state = AD_RX_PORT_DISABLED; + + /* Fall Through */ + case AD_RX_PORT_DISABLED: + port->sm_vars &= ~AD_PORT_MATCHED; + break; + case AD_RX_LACP_DISABLED: + port->sm_vars &= ~AD_PORT_SELECTED; + __record_default(port); + port->partner_oper.port_state &= ~AD_STATE_AGGREGATION; + port->sm_vars |= AD_PORT_MATCHED; + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + break; + case AD_RX_EXPIRED: + /* Reset of the Synchronization flag (Standard 43.4.12) + * This reset cause to disable this port in the + * COLLECTING_DISTRIBUTING state of the mux machine in + * case of EXPIRED even if LINK_DOWN didn't arrive for + * the port. + */ + port->partner_oper.port_state &= ~AD_STATE_SYNCHRONIZATION; + port->sm_vars &= ~AD_PORT_MATCHED; + port->partner_oper.port_state |= AD_STATE_LACP_TIMEOUT; + port->partner_oper.port_state |= AD_STATE_LACP_ACTIVITY; + port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(AD_SHORT_TIMEOUT)); + port->actor_oper_port_state |= AD_STATE_EXPIRED; + port->sm_vars |= AD_PORT_CHURNED; + break; + case AD_RX_DEFAULTED: + __update_default_selected(port); + __record_default(port); + port->sm_vars |= AD_PORT_MATCHED; + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + break; + case AD_RX_CURRENT: + /* detect loopback situation */ + if (MAC_ADDRESS_EQUAL(&(lacpdu->actor_system), + &(port->actor_system))) { + netdev_err(port->slave->bond->dev, "An illegal loopback occurred on adapter (%s)\n" + "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n", + port->slave->dev->name); + return; + } + __update_selected(lacpdu, port); + __update_ntt(lacpdu, port); + __record_pdu(lacpdu, port); + port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)); + port->actor_oper_port_state &= ~AD_STATE_EXPIRED; + break; + default: + break; + } + } +} + +/** + * ad_churn_machine - handle port churn's state machine + * @port: the port we're looking at + * + */ +static void ad_churn_machine(struct port *port) +{ + if (port->sm_vars & AD_PORT_CHURNED) { + port->sm_vars &= ~AD_PORT_CHURNED; + port->sm_churn_actor_state = AD_CHURN_MONITOR; + port->sm_churn_partner_state = AD_CHURN_MONITOR; + port->sm_churn_actor_timer_counter = + __ad_timer_to_ticks(AD_ACTOR_CHURN_TIMER, 0); + port->sm_churn_partner_timer_counter = + __ad_timer_to_ticks(AD_PARTNER_CHURN_TIMER, 0); + return; + } + if (port->sm_churn_actor_timer_counter && + !(--port->sm_churn_actor_timer_counter) && + port->sm_churn_actor_state == AD_CHURN_MONITOR) { + if (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION) { + port->sm_churn_actor_state = AD_NO_CHURN; + } else { + port->churn_actor_count++; + port->sm_churn_actor_state = AD_CHURN; + } + } + if (port->sm_churn_partner_timer_counter && + !(--port->sm_churn_partner_timer_counter) && + port->sm_churn_partner_state == AD_CHURN_MONITOR) { + if (port->partner_oper.port_state & AD_STATE_SYNCHRONIZATION) { + port->sm_churn_partner_state = AD_NO_CHURN; + } else { + port->churn_partner_count++; + port->sm_churn_partner_state = AD_CHURN; + } + } +} + +/** + * ad_tx_machine - handle a port's tx state machine + * @port: the port we're looking at + */ +static void ad_tx_machine(struct port *port) +{ + /* check if tx timer expired, to verify that we do not send more than + * 3 packets per second + */ + if (port->sm_tx_timer_counter && !(--port->sm_tx_timer_counter)) { + /* check if there is something to send */ + if (port->ntt && (port->sm_vars & AD_PORT_LACP_ENABLED)) { + __update_lacpdu_from_port(port); + + if (ad_lacpdu_send(port) >= 0) { + pr_debug("Sent LACPDU on port %d\n", + port->actor_port_number); + + /* mark ntt as false, so it will not be sent + * again until demanded + */ + port->ntt = false; + } + } + /* restart tx timer(to verify that we will not exceed + * AD_MAX_TX_IN_SECOND + */ + port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; + } +} + +/** + * ad_periodic_machine - handle a port's periodic state machine + * @port: the port we're looking at + * + * Turn ntt flag on priodically to perform periodic transmission of lacpdu's. + */ +static void ad_periodic_machine(struct port *port) +{ + periodic_states_t last_state; + + /* keep current state machine state to compare later if it was changed */ + last_state = port->sm_periodic_state; + + /* check if port was reinitialized */ + if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) || + (!(port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & AD_STATE_LACP_ACTIVITY)) + ) { + port->sm_periodic_state = AD_NO_PERIODIC; + } + /* check if state machine should change state */ + else if (port->sm_periodic_timer_counter) { + /* check if periodic state machine expired */ + if (!(--port->sm_periodic_timer_counter)) { + /* if expired then do tx */ + port->sm_periodic_state = AD_PERIODIC_TX; + } else { + /* If not expired, check if there is some new timeout + * parameter from the partner state + */ + switch (port->sm_periodic_state) { + case AD_FAST_PERIODIC: + if (!(port->partner_oper.port_state + & AD_STATE_LACP_TIMEOUT)) + port->sm_periodic_state = AD_SLOW_PERIODIC; + break; + case AD_SLOW_PERIODIC: + if ((port->partner_oper.port_state & AD_STATE_LACP_TIMEOUT)) { + port->sm_periodic_timer_counter = 0; + port->sm_periodic_state = AD_PERIODIC_TX; + } + break; + default: + break; + } + } + } else { + switch (port->sm_periodic_state) { + case AD_NO_PERIODIC: + port->sm_periodic_state = AD_FAST_PERIODIC; + break; + case AD_PERIODIC_TX: + if (!(port->partner_oper.port_state & + AD_STATE_LACP_TIMEOUT)) + port->sm_periodic_state = AD_SLOW_PERIODIC; + else + port->sm_periodic_state = AD_FAST_PERIODIC; + break; + default: + break; + } + } + + /* check if the state machine was changed */ + if (port->sm_periodic_state != last_state) { + pr_debug("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n", + port->actor_port_number, last_state, + port->sm_periodic_state); + switch (port->sm_periodic_state) { + case AD_NO_PERIODIC: + port->sm_periodic_timer_counter = 0; + break; + case AD_FAST_PERIODIC: + /* decrement 1 tick we lost in the PERIODIC_TX cycle */ + port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_FAST_PERIODIC_TIME))-1; + break; + case AD_SLOW_PERIODIC: + /* decrement 1 tick we lost in the PERIODIC_TX cycle */ + port->sm_periodic_timer_counter = __ad_timer_to_ticks(AD_PERIODIC_TIMER, (u16)(AD_SLOW_PERIODIC_TIME))-1; + break; + case AD_PERIODIC_TX: + port->ntt = true; + break; + default: + break; + } + } +} + +/** + * ad_port_selection_logic - select aggregation groups + * @port: the port we're looking at + * @update_slave_arr: Does slave array need update? + * + * Select aggregation groups, and assign each port for it's aggregetor. The + * selection logic is called in the inititalization (after all the handshkes), + * and after every lacpdu receive (if selected is off). + */ +static void ad_port_selection_logic(struct port *port, bool *update_slave_arr) +{ + struct aggregator *aggregator, *free_aggregator = NULL, *temp_aggregator; + struct port *last_port = NULL, *curr_port; + struct list_head *iter; + struct bonding *bond; + struct slave *slave; + int found = 0; + + /* if the port is already Selected, do nothing */ + if (port->sm_vars & AD_PORT_SELECTED) + return; + + bond = __get_bond_by_port(port); + + /* if the port is connected to other aggregator, detach it */ + if (port->aggregator) { + /* detach the port from its former aggregator */ + temp_aggregator = port->aggregator; + for (curr_port = temp_aggregator->lag_ports; curr_port; + last_port = curr_port, + curr_port = curr_port->next_port_in_aggregator) { + if (curr_port == port) { + temp_aggregator->num_of_ports--; + /* if it is the first port attached to the + * aggregator + */ + if (!last_port) { + temp_aggregator->lag_ports = + port->next_port_in_aggregator; + } else { + /* not the first port attached to the + * aggregator + */ + last_port->next_port_in_aggregator = + port->next_port_in_aggregator; + } + + /* clear the port's relations to this + * aggregator + */ + port->aggregator = NULL; + port->next_port_in_aggregator = NULL; + port->actor_port_aggregator_identifier = 0; + + netdev_dbg(bond->dev, "Port %d left LAG %d\n", + port->actor_port_number, + temp_aggregator->aggregator_identifier); + /* if the aggregator is empty, clear its + * parameters, and set it ready to be attached + */ + if (!temp_aggregator->lag_ports) + ad_clear_agg(temp_aggregator); + break; + } + } + if (!curr_port) { + /* meaning: the port was related to an aggregator + * but was not on the aggregator port list + */ + net_warn_ratelimited("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n", + port->slave->bond->dev->name, + port->actor_port_number, + port->slave->dev->name, + port->aggregator->aggregator_identifier); + } + } + /* search on all aggregators for a suitable aggregator for this port */ + bond_for_each_slave(bond, slave, iter) { + aggregator = &(SLAVE_AD_INFO(slave)->aggregator); + + /* keep a free aggregator for later use(if needed) */ + if (!aggregator->lag_ports) { + if (!free_aggregator) + free_aggregator = aggregator; + continue; + } + /* check if current aggregator suits us */ + if (((aggregator->actor_oper_aggregator_key == port->actor_oper_port_key) && /* if all parameters match AND */ + MAC_ADDRESS_EQUAL(&(aggregator->partner_system), &(port->partner_oper.system)) && + (aggregator->partner_system_priority == port->partner_oper.system_priority) && + (aggregator->partner_oper_aggregator_key == port->partner_oper.key) + ) && + ((!MAC_ADDRESS_EQUAL(&(port->partner_oper.system), &(null_mac_addr)) && /* partner answers */ + !aggregator->is_individual) /* but is not individual OR */ + ) + ) { + /* attach to the founded aggregator */ + port->aggregator = aggregator; + port->actor_port_aggregator_identifier = + port->aggregator->aggregator_identifier; + port->next_port_in_aggregator = aggregator->lag_ports; + port->aggregator->num_of_ports++; + aggregator->lag_ports = port; + netdev_dbg(bond->dev, "Port %d joined LAG %d(existing LAG)\n", + port->actor_port_number, + port->aggregator->aggregator_identifier); + + /* mark this port as selected */ + port->sm_vars |= AD_PORT_SELECTED; + found = 1; + break; + } + } + + /* the port couldn't find an aggregator - attach it to a new + * aggregator + */ + if (!found) { + if (free_aggregator) { + /* assign port a new aggregator */ + port->aggregator = free_aggregator; + port->actor_port_aggregator_identifier = + port->aggregator->aggregator_identifier; + + /* update the new aggregator's parameters + * if port was responsed from the end-user + */ + if (port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS) + /* if port is full duplex */ + port->aggregator->is_individual = false; + else + port->aggregator->is_individual = true; + + port->aggregator->actor_admin_aggregator_key = + port->actor_admin_port_key; + port->aggregator->actor_oper_aggregator_key = + port->actor_oper_port_key; + port->aggregator->partner_system = + port->partner_oper.system; + port->aggregator->partner_system_priority = + port->partner_oper.system_priority; + port->aggregator->partner_oper_aggregator_key = port->partner_oper.key; + port->aggregator->receive_state = 1; + port->aggregator->transmit_state = 1; + port->aggregator->lag_ports = port; + port->aggregator->num_of_ports++; + + /* mark this port as selected */ + port->sm_vars |= AD_PORT_SELECTED; + + netdev_dbg(bond->dev, "Port %d joined LAG %d(new LAG)\n", + port->actor_port_number, + port->aggregator->aggregator_identifier); + } else { + netdev_err(bond->dev, "Port %d (on %s) did not find a suitable aggregator\n", + port->actor_port_number, port->slave->dev->name); + } + } + /* if all aggregator's ports are READY_N == TRUE, set ready=TRUE + * in all aggregator's ports, else set ready=FALSE in all + * aggregator's ports + */ + __set_agg_ports_ready(port->aggregator, + __agg_ports_are_ready(port->aggregator)); + + aggregator = __get_first_agg(port); + ad_agg_selection_logic(aggregator, update_slave_arr); + + if (!port->aggregator->is_active) + port->actor_oper_port_state &= ~AD_STATE_SYNCHRONIZATION; +} + +/* Decide if "agg" is a better choice for the new active aggregator that + * the current best, according to the ad_select policy. + */ +static struct aggregator *ad_agg_selection_test(struct aggregator *best, + struct aggregator *curr) +{ + /* 0. If no best, select current. + * + * 1. If the current agg is not individual, and the best is + * individual, select current. + * + * 2. If current agg is individual and the best is not, keep best. + * + * 3. Therefore, current and best are both individual or both not + * individual, so: + * + * 3a. If current agg partner replied, and best agg partner did not, + * select current. + * + * 3b. If current agg partner did not reply and best agg partner + * did reply, keep best. + * + * 4. Therefore, current and best both have partner replies or + * both do not, so perform selection policy: + * + * BOND_AD_COUNT: Select by count of ports. If count is equal, + * select by bandwidth. + * + * BOND_AD_STABLE, BOND_AD_BANDWIDTH: Select by bandwidth. + */ + if (!best) + return curr; + + if (!curr->is_individual && best->is_individual) + return curr; + + if (curr->is_individual && !best->is_individual) + return best; + + if (__agg_has_partner(curr) && !__agg_has_partner(best)) + return curr; + + if (!__agg_has_partner(curr) && __agg_has_partner(best)) + return best; + + switch (__get_agg_selection_mode(curr->lag_ports)) { + case BOND_AD_COUNT: + if (curr->num_of_ports > best->num_of_ports) + return curr; + + if (curr->num_of_ports < best->num_of_ports) + return best; + + /*FALLTHROUGH*/ + case BOND_AD_STABLE: + case BOND_AD_BANDWIDTH: + if (__get_agg_bandwidth(curr) > __get_agg_bandwidth(best)) + return curr; + + break; + + default: + net_warn_ratelimited("%s: Impossible agg select mode %d\n", + curr->slave->bond->dev->name, + __get_agg_selection_mode(curr->lag_ports)); + break; + } + + return best; +} + +static int agg_device_up(const struct aggregator *agg) +{ + struct port *port = agg->lag_ports; + + if (!port) + return 0; + + return netif_running(port->slave->dev) && + netif_carrier_ok(port->slave->dev); +} + +/** + * ad_agg_selection_logic - select an aggregation group for a team + * @aggregator: the aggregator we're looking at + * @update_slave_arr: Does slave array need update? + * + * It is assumed that only one aggregator may be selected for a team. + * + * The logic of this function is to select the aggregator according to + * the ad_select policy: + * + * BOND_AD_STABLE: select the aggregator with the most ports attached to + * it, and to reselect the active aggregator only if the previous + * aggregator has no more ports related to it. + * + * BOND_AD_BANDWIDTH: select the aggregator with the highest total + * bandwidth, and reselect whenever a link state change takes place or the + * set of slaves in the bond changes. + * + * BOND_AD_COUNT: select the aggregator with largest number of ports + * (slaves), and reselect whenever a link state change takes place or the + * set of slaves in the bond changes. + * + * FIXME: this function MUST be called with the first agg in the bond, or + * __get_active_agg() won't work correctly. This function should be better + * called with the bond itself, and retrieve the first agg from it. + */ +static void ad_agg_selection_logic(struct aggregator *agg, + bool *update_slave_arr) +{ + struct aggregator *best, *active, *origin; + struct bonding *bond = agg->slave->bond; + struct list_head *iter; + struct slave *slave; + struct port *port; + + rcu_read_lock(); + origin = agg; + active = __get_active_agg(agg); + best = (active && agg_device_up(active)) ? active : NULL; + + bond_for_each_slave_rcu(bond, slave, iter) { + agg = &(SLAVE_AD_INFO(slave)->aggregator); + + agg->is_active = 0; + + if (agg->num_of_ports && agg_device_up(agg)) + best = ad_agg_selection_test(best, agg); + } + + if (best && + __get_agg_selection_mode(best->lag_ports) == BOND_AD_STABLE) { + /* For the STABLE policy, don't replace the old active + * aggregator if it's still active (it has an answering + * partner) or if both the best and active don't have an + * answering partner. + */ + if (active && active->lag_ports && + active->lag_ports->is_enabled && + (__agg_has_partner(active) || + (!__agg_has_partner(active) && + !__agg_has_partner(best)))) { + if (!(!active->actor_oper_aggregator_key && + best->actor_oper_aggregator_key)) { + best = NULL; + active->is_active = 1; + } + } + } + + if (best && (best == active)) { + best = NULL; + active->is_active = 1; + } + + /* if there is new best aggregator, activate it */ + if (best) { + netdev_dbg(bond->dev, "best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n", + best->aggregator_identifier, best->num_of_ports, + best->actor_oper_aggregator_key, + best->partner_oper_aggregator_key, + best->is_individual, best->is_active); + netdev_dbg(bond->dev, "best ports %p slave %p %s\n", + best->lag_ports, best->slave, + best->slave ? best->slave->dev->name : "NULL"); + + bond_for_each_slave_rcu(bond, slave, iter) { + agg = &(SLAVE_AD_INFO(slave)->aggregator); + + netdev_dbg(bond->dev, "Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n", + agg->aggregator_identifier, agg->num_of_ports, + agg->actor_oper_aggregator_key, + agg->partner_oper_aggregator_key, + agg->is_individual, agg->is_active); + } + + /* check if any partner replys */ + if (best->is_individual) { + net_warn_ratelimited("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n", + best->slave ? + best->slave->bond->dev->name : "NULL"); + } + + best->is_active = 1; + netdev_dbg(bond->dev, "LAG %d chosen as the active LAG\n", + best->aggregator_identifier); + netdev_dbg(bond->dev, "Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n", + best->aggregator_identifier, best->num_of_ports, + best->actor_oper_aggregator_key, + best->partner_oper_aggregator_key, + best->is_individual, best->is_active); + + /* disable the ports that were related to the former + * active_aggregator + */ + if (active) { + for (port = active->lag_ports; port; + port = port->next_port_in_aggregator) { + __disable_port(port); + } + } + /* Slave array needs update. */ + *update_slave_arr = true; + } + + /* if the selected aggregator is of join individuals + * (partner_system is NULL), enable their ports + */ + active = __get_active_agg(origin); + + if (active) { + if (!__agg_has_partner(active)) { + for (port = active->lag_ports; port; + port = port->next_port_in_aggregator) { + __enable_port(port); + } + } + } + + rcu_read_unlock(); + + bond_3ad_set_carrier(bond); +} + +/** + * ad_clear_agg - clear a given aggregator's parameters + * @aggregator: the aggregator we're looking at + */ +static void ad_clear_agg(struct aggregator *aggregator) +{ + if (aggregator) { + aggregator->is_individual = false; + aggregator->actor_admin_aggregator_key = 0; + aggregator->actor_oper_aggregator_key = 0; + aggregator->partner_system = null_mac_addr; + aggregator->partner_system_priority = 0; + aggregator->partner_oper_aggregator_key = 0; + aggregator->receive_state = 0; + aggregator->transmit_state = 0; + aggregator->lag_ports = NULL; + aggregator->is_active = 0; + aggregator->num_of_ports = 0; + pr_debug("LAG %d was cleared\n", + aggregator->aggregator_identifier); + } +} + +/** + * ad_initialize_agg - initialize a given aggregator's parameters + * @aggregator: the aggregator we're looking at + */ +static void ad_initialize_agg(struct aggregator *aggregator) +{ + if (aggregator) { + ad_clear_agg(aggregator); + + aggregator->aggregator_mac_address = null_mac_addr; + aggregator->aggregator_identifier = 0; + aggregator->slave = NULL; + } +} + +/** + * ad_initialize_port - initialize a given port's parameters + * @aggregator: the aggregator we're looking at + * @lacp_fast: boolean. whether fast periodic should be used + */ +static void ad_initialize_port(struct port *port, int lacp_fast) +{ + static const struct port_params tmpl = { + .system_priority = 0xffff, + .key = 1, + .port_number = 1, + .port_priority = 0xff, + .port_state = 1, + }; + static const struct lacpdu lacpdu = { + .subtype = 0x01, + .version_number = 0x01, + .tlv_type_actor_info = 0x01, + .actor_information_length = 0x14, + .tlv_type_partner_info = 0x02, + .partner_information_length = 0x14, + .tlv_type_collector_info = 0x03, + .collector_information_length = 0x10, + .collector_max_delay = htons(AD_COLLECTOR_MAX_DELAY), + }; + + if (port) { + port->actor_port_priority = 0xff; + port->actor_port_aggregator_identifier = 0; + port->ntt = false; + port->actor_admin_port_state = AD_STATE_AGGREGATION | + AD_STATE_LACP_ACTIVITY; + port->actor_oper_port_state = AD_STATE_AGGREGATION | + AD_STATE_LACP_ACTIVITY; + + if (lacp_fast) + port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT; + + memcpy(&port->partner_admin, &tmpl, sizeof(tmpl)); + memcpy(&port->partner_oper, &tmpl, sizeof(tmpl)); + + port->is_enabled = true; + /* private parameters */ + port->sm_vars = AD_PORT_BEGIN | AD_PORT_LACP_ENABLED; + port->sm_rx_state = 0; + port->sm_rx_timer_counter = 0; + port->sm_periodic_state = 0; + port->sm_periodic_timer_counter = 0; + port->sm_mux_state = 0; + port->sm_mux_timer_counter = 0; + port->sm_tx_state = 0; + port->aggregator = NULL; + port->next_port_in_aggregator = NULL; + port->transaction_id = 0; + + port->sm_churn_actor_timer_counter = 0; + port->sm_churn_actor_state = 0; + port->churn_actor_count = 0; + port->sm_churn_partner_timer_counter = 0; + port->sm_churn_partner_state = 0; + port->churn_partner_count = 0; + + memcpy(&port->lacpdu, &lacpdu, sizeof(lacpdu)); + } +} + +/** + * ad_enable_collecting_distributing - enable a port's transmit/receive + * @port: the port we're looking at + * @update_slave_arr: Does slave array need update? + * + * Enable @port if it's in an active aggregator + */ +static void ad_enable_collecting_distributing(struct port *port, + bool *update_slave_arr) +{ + if (port->aggregator->is_active) { + pr_debug("Enabling port %d(LAG %d)\n", + port->actor_port_number, + port->aggregator->aggregator_identifier); + __enable_port(port); + /* Slave array needs update */ + *update_slave_arr = true; + } +} + +/** + * ad_disable_collecting_distributing - disable a port's transmit/receive + * @port: the port we're looking at + * @update_slave_arr: Does slave array need update? + */ +static void ad_disable_collecting_distributing(struct port *port, + bool *update_slave_arr) +{ + if (port->aggregator && + !MAC_ADDRESS_EQUAL(&(port->aggregator->partner_system), + &(null_mac_addr))) { + pr_debug("Disabling port %d(LAG %d)\n", + port->actor_port_number, + port->aggregator->aggregator_identifier); + __disable_port(port); + /* Slave array needs an update */ + *update_slave_arr = true; + } +} + +/** + * ad_marker_info_received - handle receive of a Marker information frame + * @marker_info: Marker info received + * @port: the port we're looking at + */ +static void ad_marker_info_received(struct bond_marker *marker_info, + struct port *port) +{ + struct bond_marker marker; + + /* copy the received marker data to the response marker */ + memcpy(&marker, marker_info, sizeof(struct bond_marker)); + /* change the marker subtype to marker response */ + marker.tlv_type = AD_MARKER_RESPONSE_SUBTYPE; + + /* send the marker response */ + if (ad_marker_send(port, &marker) >= 0) { + pr_debug("Sent Marker Response on port %d\n", + port->actor_port_number); + } +} + +/** + * ad_marker_response_received - handle receive of a marker response frame + * @marker: marker PDU received + * @port: the port we're looking at + * + * This function does nothing since we decided not to implement send and handle + * response for marker PDU's, in this stage, but only to respond to marker + * information. + */ +static void ad_marker_response_received(struct bond_marker *marker, + struct port *port) +{ + marker = NULL; + port = NULL; + /* DO NOTHING, SINCE WE DECIDED NOT TO IMPLEMENT THIS FEATURE FOR NOW */ +} + +/* ========= AD exported functions to the main bonding code ========= */ + +/* Check aggregators status in team every T seconds */ +#define AD_AGGREGATOR_SELECTION_TIMER 8 + +/** + * bond_3ad_initiate_agg_selection - initate aggregator selection + * @bond: bonding struct + * + * Set the aggregation selection timer, to initiate an agg selection in + * the very near future. Called during first initialization, and during + * any down to up transitions of the bond. + */ +void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout) +{ + BOND_AD_INFO(bond).agg_select_timer = timeout; +} + +/** + * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures + * @bond: bonding struct to work on + * @tick_resolution: tick duration (millisecond resolution) + * + * Can be called only after the mac address of the bond is set. + */ +void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution) +{ + /* check that the bond is not initialized yet */ + if (!MAC_ADDRESS_EQUAL(&(BOND_AD_INFO(bond).system.sys_mac_addr), + bond->dev->dev_addr)) { + + BOND_AD_INFO(bond).aggregator_identifier = 0; + + BOND_AD_INFO(bond).system.sys_priority = 0xFFFF; + BOND_AD_INFO(bond).system.sys_mac_addr = *((struct mac_addr *)bond->dev->dev_addr); + + /* initialize how many times this module is called in one + * second (should be about every 100ms) + */ + ad_ticks_per_sec = tick_resolution; + + bond_3ad_initiate_agg_selection(bond, + AD_AGGREGATOR_SELECTION_TIMER * + ad_ticks_per_sec); + } +} + +/** + * bond_3ad_bind_slave - initialize a slave's port + * @slave: slave struct to work on + * + * Returns: 0 on success + * < 0 on error + */ +void bond_3ad_bind_slave(struct slave *slave) +{ + struct bonding *bond = bond_get_bond_by_slave(slave); + struct port *port; + struct aggregator *aggregator; + + /* check that the slave has not been initialized yet. */ + if (SLAVE_AD_INFO(slave)->port.slave != slave) { + + /* port initialization */ + port = &(SLAVE_AD_INFO(slave)->port); + + ad_initialize_port(port, bond->params.lacp_fast); + + port->slave = slave; + port->actor_port_number = SLAVE_AD_INFO(slave)->id; + /* key is determined according to the link speed, duplex and user key(which + * is yet not supported) + */ + port->actor_admin_port_key = 0; + port->actor_admin_port_key |= __get_duplex(port); + port->actor_admin_port_key |= (__get_link_speed(port) << 1); + port->actor_oper_port_key = port->actor_admin_port_key; + /* if the port is not full duplex, then the port should be not + * lacp Enabled + */ + if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS)) + port->sm_vars &= ~AD_PORT_LACP_ENABLED; + /* actor system is the bond's system */ + port->actor_system = BOND_AD_INFO(bond).system.sys_mac_addr; + /* tx timer(to verify that no more than MAX_TX_IN_SECOND + * lacpdu's are sent in one second) + */ + port->sm_tx_timer_counter = ad_ticks_per_sec/AD_MAX_TX_IN_SECOND; + + __disable_port(port); + + /* aggregator initialization */ + aggregator = &(SLAVE_AD_INFO(slave)->aggregator); + + ad_initialize_agg(aggregator); + + aggregator->aggregator_mac_address = *((struct mac_addr *)bond->dev->dev_addr); + aggregator->aggregator_identifier = ++BOND_AD_INFO(bond).aggregator_identifier; + aggregator->slave = slave; + aggregator->is_active = 0; + aggregator->num_of_ports = 0; + } +} + +/** + * bond_3ad_unbind_slave - deinitialize a slave's port + * @slave: slave struct to work on + * + * Search for the aggregator that is related to this port, remove the + * aggregator and assign another aggregator for other port related to it + * (if any), and remove the port. + */ +void bond_3ad_unbind_slave(struct slave *slave) +{ + struct port *port, *prev_port, *temp_port; + struct aggregator *aggregator, *new_aggregator, *temp_aggregator; + int select_new_active_agg = 0; + struct bonding *bond = slave->bond; + struct slave *slave_iter; + struct list_head *iter; + bool dummy_slave_update; /* Ignore this value as caller updates array */ + + /* Sync against bond_3ad_state_machine_handler() */ + spin_lock_bh(&bond->mode_lock); + aggregator = &(SLAVE_AD_INFO(slave)->aggregator); + port = &(SLAVE_AD_INFO(slave)->port); + + /* if slave is null, the whole port is not initialized */ + if (!port->slave) { + netdev_warn(bond->dev, "Trying to unbind an uninitialized port on %s\n", + slave->dev->name); + goto out; + } + + netdev_dbg(bond->dev, "Unbinding Link Aggregation Group %d\n", + aggregator->aggregator_identifier); + + /* Tell the partner that this port is not suitable for aggregation */ + port->actor_oper_port_state &= ~AD_STATE_AGGREGATION; + __update_lacpdu_from_port(port); + ad_lacpdu_send(port); + + /* check if this aggregator is occupied */ + if (aggregator->lag_ports) { + /* check if there are other ports related to this aggregator + * except the port related to this slave(thats ensure us that + * there is a reason to search for new aggregator, and that we + * will find one + */ + if ((aggregator->lag_ports != port) || + (aggregator->lag_ports->next_port_in_aggregator)) { + /* find new aggregator for the related port(s) */ + bond_for_each_slave(bond, slave_iter, iter) { + new_aggregator = &(SLAVE_AD_INFO(slave_iter)->aggregator); + /* if the new aggregator is empty, or it is + * connected to our port only + */ + if (!new_aggregator->lag_ports || + ((new_aggregator->lag_ports == port) && + !new_aggregator->lag_ports->next_port_in_aggregator)) + break; + } + if (!slave_iter) + new_aggregator = NULL; + + /* if new aggregator found, copy the aggregator's + * parameters and connect the related lag_ports to the + * new aggregator + */ + if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) { + netdev_dbg(bond->dev, "Some port(s) related to LAG %d - replacing with LAG %d\n", + aggregator->aggregator_identifier, + new_aggregator->aggregator_identifier); + + if ((new_aggregator->lag_ports == port) && + new_aggregator->is_active) { + netdev_info(bond->dev, "Removing an active aggregator\n"); + select_new_active_agg = 1; + } + + new_aggregator->is_individual = aggregator->is_individual; + new_aggregator->actor_admin_aggregator_key = aggregator->actor_admin_aggregator_key; + new_aggregator->actor_oper_aggregator_key = aggregator->actor_oper_aggregator_key; + new_aggregator->partner_system = aggregator->partner_system; + new_aggregator->partner_system_priority = aggregator->partner_system_priority; + new_aggregator->partner_oper_aggregator_key = aggregator->partner_oper_aggregator_key; + new_aggregator->receive_state = aggregator->receive_state; + new_aggregator->transmit_state = aggregator->transmit_state; + new_aggregator->lag_ports = aggregator->lag_ports; + new_aggregator->is_active = aggregator->is_active; + new_aggregator->num_of_ports = aggregator->num_of_ports; + + /* update the information that is written on + * the ports about the aggregator + */ + for (temp_port = aggregator->lag_ports; temp_port; + temp_port = temp_port->next_port_in_aggregator) { + temp_port->aggregator = new_aggregator; + temp_port->actor_port_aggregator_identifier = new_aggregator->aggregator_identifier; + } + + ad_clear_agg(aggregator); + + if (select_new_active_agg) + ad_agg_selection_logic(__get_first_agg(port), + &dummy_slave_update); + } else { + netdev_warn(bond->dev, "unbinding aggregator, and could not find a new aggregator for its ports\n"); + } + } else { + /* in case that the only port related to this + * aggregator is the one we want to remove + */ + select_new_active_agg = aggregator->is_active; + ad_clear_agg(aggregator); + if (select_new_active_agg) { + netdev_info(bond->dev, "Removing an active aggregator\n"); + /* select new active aggregator */ + temp_aggregator = __get_first_agg(port); + if (temp_aggregator) + ad_agg_selection_logic(temp_aggregator, + &dummy_slave_update); + } + } + } + + netdev_dbg(bond->dev, "Unbinding port %d\n", port->actor_port_number); + + /* find the aggregator that this port is connected to */ + bond_for_each_slave(bond, slave_iter, iter) { + temp_aggregator = &(SLAVE_AD_INFO(slave_iter)->aggregator); + prev_port = NULL; + /* search the port in the aggregator's related ports */ + for (temp_port = temp_aggregator->lag_ports; temp_port; + prev_port = temp_port, + temp_port = temp_port->next_port_in_aggregator) { + if (temp_port == port) { + /* the aggregator found - detach the port from + * this aggregator + */ + if (prev_port) + prev_port->next_port_in_aggregator = temp_port->next_port_in_aggregator; + else + temp_aggregator->lag_ports = temp_port->next_port_in_aggregator; + temp_aggregator->num_of_ports--; + if (temp_aggregator->num_of_ports == 0) { + select_new_active_agg = temp_aggregator->is_active; + ad_clear_agg(temp_aggregator); + if (select_new_active_agg) { + netdev_info(bond->dev, "Removing an active aggregator\n"); + /* select new active aggregator */ + ad_agg_selection_logic(__get_first_agg(port), + &dummy_slave_update); + } + } + break; + } + } + } + port->slave = NULL; + +out: + spin_unlock_bh(&bond->mode_lock); +} + +/** + * bond_3ad_state_machine_handler - handle state machines timeout + * @bond: bonding struct to work on + * + * The state machine handling concept in this module is to check every tick + * which state machine should operate any function. The execution order is + * round robin, so when we have an interaction between state machines, the + * reply of one to each other might be delayed until next tick. + * + * This function also complete the initialization when the agg_select_timer + * times out, and it selects an aggregator for the ports that are yet not + * related to any aggregator, and selects the active aggregator for a bond. + */ +void bond_3ad_state_machine_handler(struct work_struct *work) +{ + struct bonding *bond = container_of(work, struct bonding, + ad_work.work); + struct aggregator *aggregator; + struct list_head *iter; + struct slave *slave; + struct port *port; + bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER; + bool update_slave_arr = false; + + /* Lock to protect data accessed by all (e.g., port->sm_vars) and + * against running with bond_3ad_unbind_slave. ad_rx_machine may run + * concurrently due to incoming LACPDU as well. + */ + spin_lock_bh(&bond->mode_lock); + rcu_read_lock(); + + /* check if there are any slaves */ + if (!bond_has_slaves(bond)) + goto re_arm; + + /* check if agg_select_timer timer after initialize is timed out */ + if (BOND_AD_INFO(bond).agg_select_timer && + !(--BOND_AD_INFO(bond).agg_select_timer)) { + slave = bond_first_slave_rcu(bond); + port = slave ? &(SLAVE_AD_INFO(slave)->port) : NULL; + + /* select the active aggregator for the bond */ + if (port) { + if (!port->slave) { + net_warn_ratelimited("%s: Warning: bond's first port is uninitialized\n", + bond->dev->name); + goto re_arm; + } + + aggregator = __get_first_agg(port); + ad_agg_selection_logic(aggregator, &update_slave_arr); + } + bond_3ad_set_carrier(bond); + } + + /* for each port run the state machines */ + bond_for_each_slave_rcu(bond, slave, iter) { + port = &(SLAVE_AD_INFO(slave)->port); + if (!port->slave) { + net_warn_ratelimited("%s: Warning: Found an uninitialized port\n", + bond->dev->name); + goto re_arm; + } + + ad_rx_machine(NULL, port); + ad_periodic_machine(port); + ad_port_selection_logic(port, &update_slave_arr); + ad_mux_machine(port, &update_slave_arr); + ad_tx_machine(port); + ad_churn_machine(port); + + /* turn off the BEGIN bit, since we already handled it */ + if (port->sm_vars & AD_PORT_BEGIN) + port->sm_vars &= ~AD_PORT_BEGIN; + } + +re_arm: + bond_for_each_slave_rcu(bond, slave, iter) { + if (slave->should_notify) { + should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW; + break; + } + } + rcu_read_unlock(); + spin_unlock_bh(&bond->mode_lock); + + if (update_slave_arr) + bond_slave_arr_work_rearm(bond, 0); + + if (should_notify_rtnl && rtnl_trylock()) { + bond_slave_state_notify(bond); + rtnl_unlock(); + } + queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks); +} + +/** + * bond_3ad_rx_indication - handle a received frame + * @lacpdu: received lacpdu + * @slave: slave struct to work on + * @length: length of the data received + * + * It is assumed that frames that were sent on this NIC don't returned as new + * received frames (loopback). Since only the payload is given to this + * function, it check for loopback. + */ +static int bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, + u16 length) +{ + struct port *port; + int ret = RX_HANDLER_ANOTHER; + + if (length >= sizeof(struct lacpdu)) { + + port = &(SLAVE_AD_INFO(slave)->port); + + if (!port->slave) { + net_warn_ratelimited("%s: Warning: port of slave %s is uninitialized\n", + slave->dev->name, slave->bond->dev->name); + return ret; + } + + switch (lacpdu->subtype) { + case AD_TYPE_LACPDU: + ret = RX_HANDLER_CONSUMED; + netdev_dbg(slave->bond->dev, + "Received LACPDU on port %d slave %s\n", + port->actor_port_number, + slave->dev->name); + /* Protect against concurrent state machines */ + spin_lock(&slave->bond->mode_lock); + ad_rx_machine(lacpdu, port); + spin_unlock(&slave->bond->mode_lock); + break; + + case AD_TYPE_MARKER: + ret = RX_HANDLER_CONSUMED; + /* No need to convert fields to Little Endian since we + * don't use the marker's fields. + */ + + switch (((struct bond_marker *)lacpdu)->tlv_type) { + case AD_MARKER_INFORMATION_SUBTYPE: + netdev_dbg(slave->bond->dev, "Received Marker Information on port %d\n", + port->actor_port_number); + ad_marker_info_received((struct bond_marker *)lacpdu, port); + break; + + case AD_MARKER_RESPONSE_SUBTYPE: + netdev_dbg(slave->bond->dev, "Received Marker Response on port %d\n", + port->actor_port_number); + ad_marker_response_received((struct bond_marker *)lacpdu, port); + break; + + default: + netdev_dbg(slave->bond->dev, "Received an unknown Marker subtype on slot %d\n", + port->actor_port_number); + } + } + } + return ret; +} + +/** + * bond_3ad_adapter_speed_changed - handle a slave's speed change indication + * @slave: slave struct to work on + * + * Handle reselection of aggregator (if needed) for this port. + */ +void bond_3ad_adapter_speed_changed(struct slave *slave) +{ + struct port *port; + + port = &(SLAVE_AD_INFO(slave)->port); + + /* if slave is null, the whole port is not initialized */ + if (!port->slave) { + netdev_warn(slave->bond->dev, "speed changed for uninitialized port on %s\n", + slave->dev->name); + return; + } + + spin_lock_bh(&slave->bond->mode_lock); + + port->actor_admin_port_key &= ~AD_SPEED_KEY_MASKS; + port->actor_admin_port_key |= __get_link_speed(port) << 1; + port->actor_oper_port_key = port->actor_admin_port_key; + netdev_dbg(slave->bond->dev, "Port %d changed speed\n", port->actor_port_number); + /* there is no need to reselect a new aggregator, just signal the + * state machines to reinitialize + */ + port->sm_vars |= AD_PORT_BEGIN; + + spin_unlock_bh(&slave->bond->mode_lock); +} + +/** + * bond_3ad_adapter_duplex_changed - handle a slave's duplex change indication + * @slave: slave struct to work on + * + * Handle reselection of aggregator (if needed) for this port. + */ +void bond_3ad_adapter_duplex_changed(struct slave *slave) +{ + struct port *port; + + port = &(SLAVE_AD_INFO(slave)->port); + + /* if slave is null, the whole port is not initialized */ + if (!port->slave) { + netdev_warn(slave->bond->dev, "duplex changed for uninitialized port on %s\n", + slave->dev->name); + return; + } + + spin_lock_bh(&slave->bond->mode_lock); + + port->actor_admin_port_key &= ~AD_DUPLEX_KEY_MASKS; + port->actor_admin_port_key |= __get_duplex(port); + port->actor_oper_port_key = port->actor_admin_port_key; + netdev_dbg(slave->bond->dev, "Port %d slave %s changed duplex\n", + port->actor_port_number, slave->dev->name); + if (port->actor_oper_port_key & AD_DUPLEX_KEY_MASKS) + port->sm_vars |= AD_PORT_LACP_ENABLED; + /* there is no need to reselect a new aggregator, just signal the + * state machines to reinitialize + */ + port->sm_vars |= AD_PORT_BEGIN; + + spin_unlock_bh(&slave->bond->mode_lock); +} + +/** + * bond_3ad_handle_link_change - handle a slave's link status change indication + * @slave: slave struct to work on + * @status: whether the link is now up or down + * + * Handle reselection of aggregator (if needed) for this port. + */ +void bond_3ad_handle_link_change(struct slave *slave, char link) +{ + struct port *port; + + port = &(SLAVE_AD_INFO(slave)->port); + + /* if slave is null, the whole port is not initialized */ + if (!port->slave) { + netdev_warn(slave->bond->dev, "link status changed for uninitialized port on %s\n", + slave->dev->name); + return; + } + + spin_lock_bh(&slave->bond->mode_lock); + /* on link down we are zeroing duplex and speed since + * some of the adaptors(ce1000.lan) report full duplex/speed + * instead of N/A(duplex) / 0(speed). + * + * on link up we are forcing recheck on the duplex and speed since + * some of he adaptors(ce1000.lan) report. + */ + port->actor_admin_port_key &= ~(AD_DUPLEX_KEY_MASKS|AD_SPEED_KEY_MASKS); + if (link == BOND_LINK_UP) { + port->is_enabled = true; + port->actor_admin_port_key |= + (__get_link_speed(port) << 1) | __get_duplex(port); + if (port->actor_admin_port_key & AD_DUPLEX_KEY_MASKS) + port->sm_vars |= AD_PORT_LACP_ENABLED; + } else { + /* link has failed */ + port->is_enabled = false; + port->sm_vars &= ~AD_PORT_LACP_ENABLED; + } + port->actor_oper_port_key = port->actor_admin_port_key; + netdev_dbg(slave->bond->dev, "Port %d changed link status to %s\n", + port->actor_port_number, + link == BOND_LINK_UP ? "UP" : "DOWN"); + /* there is no need to reselect a new aggregator, just signal the + * state machines to reinitialize + */ + port->sm_vars |= AD_PORT_BEGIN; + + spin_unlock_bh(&slave->bond->mode_lock); + + /* RTNL is held and mode_lock is released so it's safe + * to update slave_array here. + */ + bond_update_slave_arr(slave->bond, NULL); +} + +/** + * bond_3ad_set_carrier - set link state for bonding master + * @bond - bonding structure + * + * if we have an active aggregator, we're up, if not, we're down. + * Presumes that we cannot have an active aggregator if there are + * no slaves with link up. + * + * This behavior complies with IEEE 802.3 section 43.3.9. + * + * Called by bond_set_carrier(). Return zero if carrier state does not + * change, nonzero if it does. + */ +int bond_3ad_set_carrier(struct bonding *bond) +{ + struct aggregator *active; + struct slave *first_slave; + int ret = 1; + + rcu_read_lock(); + first_slave = bond_first_slave_rcu(bond); + if (!first_slave) { + ret = 0; + goto out; + } + active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator)); + if (active) { + /* are enough slaves available to consider link up? */ + if (active->num_of_ports < bond->params.min_links) { + if (netif_carrier_ok(bond->dev)) { + netif_carrier_off(bond->dev); + goto out; + } + } else if (!netif_carrier_ok(bond->dev)) { + netif_carrier_on(bond->dev); + goto out; + } + } else if (netif_carrier_ok(bond->dev)) { + netif_carrier_off(bond->dev); + } +out: + rcu_read_unlock(); + return ret; +} + +/** + * __bond_3ad_get_active_agg_info - get information of the active aggregator + * @bond: bonding struct to work on + * @ad_info: ad_info struct to fill with the bond's info + * + * Returns: 0 on success + * < 0 on error + */ +int __bond_3ad_get_active_agg_info(struct bonding *bond, + struct ad_info *ad_info) +{ + struct aggregator *aggregator = NULL; + struct list_head *iter; + struct slave *slave; + struct port *port; + + bond_for_each_slave_rcu(bond, slave, iter) { + port = &(SLAVE_AD_INFO(slave)->port); + if (port->aggregator && port->aggregator->is_active) { + aggregator = port->aggregator; + break; + } + } + + if (!aggregator) + return -1; + + ad_info->aggregator_id = aggregator->aggregator_identifier; + ad_info->ports = aggregator->num_of_ports; + ad_info->actor_key = aggregator->actor_oper_aggregator_key; + ad_info->partner_key = aggregator->partner_oper_aggregator_key; + ether_addr_copy(ad_info->partner_system, + aggregator->partner_system.mac_addr_value); + return 0; +} + +int bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info) +{ + int ret; + + rcu_read_lock(); + ret = __bond_3ad_get_active_agg_info(bond, ad_info); + rcu_read_unlock(); + + return ret; +} + +int bond_3ad_lacpdu_recv(const struct sk_buff *skb, struct bonding *bond, + struct slave *slave) +{ + struct lacpdu *lacpdu, _lacpdu; + + if (skb->protocol != PKT_TYPE_LACPDU) + return RX_HANDLER_ANOTHER; + + if (!MAC_ADDRESS_EQUAL(eth_hdr(skb)->h_dest, lacpdu_mcast_addr)) + return RX_HANDLER_ANOTHER; + + lacpdu = skb_header_pointer(skb, 0, sizeof(_lacpdu), &_lacpdu); + if (!lacpdu) + return RX_HANDLER_ANOTHER; + + return bond_3ad_rx_indication(lacpdu, slave, skb->len); +} + +/** + * bond_3ad_update_lacp_rate - change the lacp rate + * @bond - bonding struct + * + * When modify lacp_rate parameter via sysfs, + * update actor_oper_port_state of each port. + * + * Hold bond->mode_lock, + * so we can modify port->actor_oper_port_state, + * no matter bond is up or down. + */ +void bond_3ad_update_lacp_rate(struct bonding *bond) +{ + struct port *port = NULL; + struct list_head *iter; + struct slave *slave; + int lacp_fast; + + lacp_fast = bond->params.lacp_fast; + spin_lock_bh(&bond->mode_lock); + bond_for_each_slave(bond, slave, iter) { + port = &(SLAVE_AD_INFO(slave)->port); + if (lacp_fast) + port->actor_oper_port_state |= AD_STATE_LACP_TIMEOUT; + else + port->actor_oper_port_state &= ~AD_STATE_LACP_TIMEOUT; + } + spin_unlock_bh(&bond->mode_lock); +} -- cgit v1.2.3-54-g00ecf