From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/net/can/softing/Kconfig | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 drivers/net/can/softing/Kconfig (limited to 'drivers/net/can/softing/Kconfig') diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig new file mode 100644 index 000000000..e103b2374 --- /dev/null +++ b/drivers/net/can/softing/Kconfig @@ -0,0 +1,27 @@ +config CAN_SOFTING + tristate "Softing Gmbh CAN generic support" + depends on HAS_IOMEM + ---help--- + Support for CAN cards from Softing Gmbh & some cards + from Vector Gmbh. + Softing Gmbh CAN cards come with 1 or 2 physical busses. + Those cards typically use Dual Port RAM to communicate + with the host CPU. The interface is then identical for PCI + and PCMCIA cards. This driver operates on a platform device, + which has been created by softing_cs or softing_pci driver. + Warning: + The API of the card does not allow fine control per bus, but + controls the 2 busses on the card together. + As such, some actions (start/stop/busoff recovery) on 1 bus + must bring down the other bus too temporarily. + +config CAN_SOFTING_CS + tristate "Softing Gmbh CAN pcmcia cards" + depends on PCMCIA + depends on CAN_SOFTING + ---help--- + Support for PCMCIA cards from Softing Gmbh & some cards + from Vector Gmbh. + /*(DEBLOBBED)*/ + In order to use the card as CAN device, you need the Softing generic + support too. -- cgit v1.2.3-54-g00ecf