From e5fd91f1ef340da553f7a79da9540c3db711c937 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 8 Sep 2015 01:01:14 -0300 Subject: Linux-libre 4.2-gnu --- drivers/net/ethernet/freescale/gianfar_ethtool.c | 350 +---------------------- 1 file changed, 5 insertions(+), 345 deletions(-) (limited to 'drivers/net/ethernet/freescale/gianfar_ethtool.c') diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index fda12fb32..5b90fcf96 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -653,7 +653,6 @@ static void gfar_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct gfar_private *priv = netdev_priv(dev); - unsigned long flags; if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) && wol->wolopts != 0) @@ -664,9 +663,7 @@ static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) device_set_wakeup_enable(&dev->dev, wol->wolopts & WAKE_MAGIC); - spin_lock_irqsave(&priv->bflock, flags); - priv->wol_en = !!device_may_wakeup(&dev->dev); - spin_unlock_irqrestore(&priv->bflock, flags); + priv->wol_en = !!device_may_wakeup(&dev->dev); return 0; } @@ -903,27 +900,6 @@ static int gfar_check_filer_hardware(struct gfar_private *priv) return 0; } -static int gfar_comp_asc(const void *a, const void *b) -{ - return memcmp(a, b, 4); -} - -static int gfar_comp_desc(const void *a, const void *b) -{ - return -memcmp(a, b, 4); -} - -static void gfar_swap(void *a, void *b, int size) -{ - u32 *_a = a; - u32 *_b = b; - - swap(_a[0], _b[0]); - swap(_a[1], _b[1]); - swap(_a[2], _b[2]); - swap(_a[3], _b[3]); -} - /* Write a mask to filer cache */ static void gfar_set_mask(u32 mask, struct filer_table *tab) { @@ -1273,310 +1249,6 @@ static int gfar_convert_to_filer(struct ethtool_rx_flow_spec *rule, return 0; } -/* Copy size filer entries */ -static void gfar_copy_filer_entries(struct gfar_filer_entry dst[0], - struct gfar_filer_entry src[0], s32 size) -{ - while (size > 0) { - size--; - dst[size].ctrl = src[size].ctrl; - dst[size].prop = src[size].prop; - } -} - -/* Delete the contents of the filer-table between start and end - * and collapse them - */ -static int gfar_trim_filer_entries(u32 begin, u32 end, struct filer_table *tab) -{ - int length; - - if (end > MAX_FILER_CACHE_IDX || end < begin) - return -EINVAL; - - end++; - length = end - begin; - - /* Copy */ - while (end < tab->index) { - tab->fe[begin].ctrl = tab->fe[end].ctrl; - tab->fe[begin++].prop = tab->fe[end++].prop; - - } - /* Fill up with don't cares */ - while (begin < tab->index) { - tab->fe[begin].ctrl = 0x60; - tab->fe[begin].prop = 0xFFFFFFFF; - begin++; - } - - tab->index -= length; - return 0; -} - -/* Make space on the wanted location */ -static int gfar_expand_filer_entries(u32 begin, u32 length, - struct filer_table *tab) -{ - if (length == 0 || length + tab->index > MAX_FILER_CACHE_IDX || - begin > MAX_FILER_CACHE_IDX) - return -EINVAL; - - gfar_copy_filer_entries(&(tab->fe[begin + length]), &(tab->fe[begin]), - tab->index - length + 1); - - tab->index += length; - return 0; -} - -static int gfar_get_next_cluster_start(int start, struct filer_table *tab) -{ - for (; (start < tab->index) && (start < MAX_FILER_CACHE_IDX - 1); - start++) { - if ((tab->fe[start].ctrl & (RQFCR_AND | RQFCR_CLE)) == - (RQFCR_AND | RQFCR_CLE)) - return start; - } - return -1; -} - -static int gfar_get_next_cluster_end(int start, struct filer_table *tab) -{ - for (; (start < tab->index) && (start < MAX_FILER_CACHE_IDX - 1); - start++) { - if ((tab->fe[start].ctrl & (RQFCR_AND | RQFCR_CLE)) == - (RQFCR_CLE)) - return start; - } - return -1; -} - -/* Uses hardwares clustering option to reduce - * the number of filer table entries - */ -static void gfar_cluster_filer(struct filer_table *tab) -{ - s32 i = -1, j, iend, jend; - - while ((i = gfar_get_next_cluster_start(++i, tab)) != -1) { - j = i; - while ((j = gfar_get_next_cluster_start(++j, tab)) != -1) { - /* The cluster entries self and the previous one - * (a mask) must be identical! - */ - if (tab->fe[i].ctrl != tab->fe[j].ctrl) - break; - if (tab->fe[i].prop != tab->fe[j].prop) - break; - if (tab->fe[i - 1].ctrl != tab->fe[j - 1].ctrl) - break; - if (tab->fe[i - 1].prop != tab->fe[j - 1].prop) - break; - iend = gfar_get_next_cluster_end(i, tab); - jend = gfar_get_next_cluster_end(j, tab); - if (jend == -1 || iend == -1) - break; - - /* First we make some free space, where our cluster - * element should be. Then we copy it there and finally - * delete in from its old location. - */ - if (gfar_expand_filer_entries(iend, (jend - j), tab) == - -EINVAL) - break; - - gfar_copy_filer_entries(&(tab->fe[iend + 1]), - &(tab->fe[jend + 1]), jend - j); - - if (gfar_trim_filer_entries(jend - 1, - jend + (jend - j), - tab) == -EINVAL) - return; - - /* Mask out cluster bit */ - tab->fe[iend].ctrl &= ~(RQFCR_CLE); - } - } -} - -/* Swaps the masked bits of a1<>a2 and b1<>b2 */ -static void gfar_swap_bits(struct gfar_filer_entry *a1, - struct gfar_filer_entry *a2, - struct gfar_filer_entry *b1, - struct gfar_filer_entry *b2, u32 mask) -{ - u32 temp[4]; - temp[0] = a1->ctrl & mask; - temp[1] = a2->ctrl & mask; - temp[2] = b1->ctrl & mask; - temp[3] = b2->ctrl & mask; - - a1->ctrl &= ~mask; - a2->ctrl &= ~mask; - b1->ctrl &= ~mask; - b2->ctrl &= ~mask; - - a1->ctrl |= temp[1]; - a2->ctrl |= temp[0]; - b1->ctrl |= temp[3]; - b2->ctrl |= temp[2]; -} - -/* Generate a list consisting of masks values with their start and - * end of validity and block as indicator for parts belonging - * together (glued by ANDs) in mask_table - */ -static u32 gfar_generate_mask_table(struct gfar_mask_entry *mask_table, - struct filer_table *tab) -{ - u32 i, and_index = 0, block_index = 1; - - for (i = 0; i < tab->index; i++) { - - /* LSByte of control = 0 sets a mask */ - if (!(tab->fe[i].ctrl & 0xF)) { - mask_table[and_index].mask = tab->fe[i].prop; - mask_table[and_index].start = i; - mask_table[and_index].block = block_index; - if (and_index >= 1) - mask_table[and_index - 1].end = i - 1; - and_index++; - } - /* cluster starts and ends will be separated because they should - * hold their position - */ - if (tab->fe[i].ctrl & RQFCR_CLE) - block_index++; - /* A not set AND indicates the end of a depended block */ - if (!(tab->fe[i].ctrl & RQFCR_AND)) - block_index++; - } - - mask_table[and_index - 1].end = i - 1; - - return and_index; -} - -/* Sorts the entries of mask_table by the values of the masks. - * Important: The 0xFF80 flags of the first and last entry of a - * block must hold their position (which queue, CLusterEnable, ReJEct, - * AND) - */ -static void gfar_sort_mask_table(struct gfar_mask_entry *mask_table, - struct filer_table *temp_table, u32 and_index) -{ - /* Pointer to compare function (_asc or _desc) */ - int (*gfar_comp)(const void *, const void *); - - u32 i, size = 0, start = 0, prev = 1; - u32 old_first, old_last, new_first, new_last; - - gfar_comp = &gfar_comp_desc; - - for (i = 0; i < and_index; i++) { - if (prev != mask_table[i].block) { - old_first = mask_table[start].start + 1; - old_last = mask_table[i - 1].end; - sort(mask_table + start, size, - sizeof(struct gfar_mask_entry), - gfar_comp, &gfar_swap); - - /* Toggle order for every block. This makes the - * thing more efficient! - */ - if (gfar_comp == gfar_comp_desc) - gfar_comp = &gfar_comp_asc; - else - gfar_comp = &gfar_comp_desc; - - new_first = mask_table[start].start + 1; - new_last = mask_table[i - 1].end; - - gfar_swap_bits(&temp_table->fe[new_first], - &temp_table->fe[old_first], - &temp_table->fe[new_last], - &temp_table->fe[old_last], - RQFCR_QUEUE | RQFCR_CLE | - RQFCR_RJE | RQFCR_AND); - - start = i; - size = 0; - } - size++; - prev = mask_table[i].block; - } -} - -/* Reduces the number of masks needed in the filer table to save entries - * This is done by sorting the masks of a depended block. A depended block is - * identified by gluing ANDs or CLE. The sorting order toggles after every - * block. Of course entries in scope of a mask must change their location with - * it. - */ -static int gfar_optimize_filer_masks(struct filer_table *tab) -{ - struct filer_table *temp_table; - struct gfar_mask_entry *mask_table; - - u32 and_index = 0, previous_mask = 0, i = 0, j = 0, size = 0; - s32 ret = 0; - - /* We need a copy of the filer table because - * we want to change its order - */ - temp_table = kmemdup(tab, sizeof(*temp_table), GFP_KERNEL); - if (temp_table == NULL) - return -ENOMEM; - - mask_table = kcalloc(MAX_FILER_CACHE_IDX / 2 + 1, - sizeof(struct gfar_mask_entry), GFP_KERNEL); - - if (mask_table == NULL) { - ret = -ENOMEM; - goto end; - } - - and_index = gfar_generate_mask_table(mask_table, tab); - - gfar_sort_mask_table(mask_table, temp_table, and_index); - - /* Now we can copy the data from our duplicated filer table to - * the real one in the order the mask table says - */ - for (i = 0; i < and_index; i++) { - size = mask_table[i].end - mask_table[i].start + 1; - gfar_copy_filer_entries(&(tab->fe[j]), - &(temp_table->fe[mask_table[i].start]), size); - j += size; - } - - /* And finally we just have to check for duplicated masks and drop the - * second ones - */ - for (i = 0; i < tab->index && i < MAX_FILER_CACHE_IDX; i++) { - if (tab->fe[i].ctrl == 0x80) { - previous_mask = i++; - break; - } - } - for (; i < tab->index && i < MAX_FILER_CACHE_IDX; i++) { - if (tab->fe[i].ctrl == 0x80) { - if (tab->fe[i].prop == tab->fe[previous_mask].prop) { - /* Two identical ones found! - * So drop the second one! - */ - gfar_trim_filer_entries(i, i, tab); - } else - /* Not identical! */ - previous_mask = i; - } - } - - kfree(mask_table); -end: kfree(temp_table); - return ret; -} - /* Write the bit-pattern from software's buffer to hardware registers */ static int gfar_write_filer_table(struct gfar_private *priv, struct filer_table *tab) @@ -1586,11 +1258,10 @@ static int gfar_write_filer_table(struct gfar_private *priv, return -EBUSY; /* Fill regular entries */ - for (; i < MAX_FILER_IDX - 1 && (tab->fe[i].ctrl | tab->fe[i].prop); - i++) + for (; i < MAX_FILER_IDX && (tab->fe[i].ctrl | tab->fe[i].prop); i++) gfar_write_filer(priv, i, tab->fe[i].ctrl, tab->fe[i].prop); /* Fill the rest with fall-troughs */ - for (; i < MAX_FILER_IDX - 1; i++) + for (; i < MAX_FILER_IDX; i++) gfar_write_filer(priv, i, 0x60, 0xFFFFFFFF); /* Last entry must be default accept * because that's what people expect @@ -1624,7 +1295,6 @@ static int gfar_process_filer_changes(struct gfar_private *priv) { struct ethtool_flow_spec_container *j; struct filer_table *tab; - s32 i = 0; s32 ret = 0; /* So index is set to zero, too! */ @@ -1649,17 +1319,6 @@ static int gfar_process_filer_changes(struct gfar_private *priv) } } - i = tab->index; - - /* Optimizations to save entries */ - gfar_cluster_filer(tab); - gfar_optimize_filer_masks(tab); - - pr_debug("\tSummary:\n" - "\tData on hardware: %d\n" - "\tCompression rate: %d%%\n", - tab->index, 100 - (100 * tab->index) / i); - /* Write everything to hardware */ ret = gfar_write_filer_table(priv, tab); if (ret == -EBUSY) { @@ -1725,13 +1384,14 @@ static int gfar_add_cls(struct gfar_private *priv, } process: + priv->rx_list.count++; ret = gfar_process_filer_changes(priv); if (ret) goto clean_list; - priv->rx_list.count++; return ret; clean_list: + priv->rx_list.count--; list_del(&temp->list); clean_mem: kfree(temp); -- cgit v1.2.3-54-g00ecf