From 863981e96738983919de841ec669e157e6bdaeb0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Sun, 11 Sep 2016 04:34:46 -0300 Subject: Linux-libre 4.7.1-gnu --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 682 +++++++++++++++++++++++++++++- 1 file changed, 660 insertions(+), 22 deletions(-) (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h') diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index ffe4c0305..57d48da70 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -1805,6 +1805,184 @@ static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port, } } +/* QTCT - QoS Switch Traffic Class Table + * ------------------------------------- + * Configures the mapping between the packet switch priority and the + * traffic class on the transmit port. + */ +#define MLXSW_REG_QTCT_ID 0x400A +#define MLXSW_REG_QTCT_LEN 0x08 + +static const struct mlxsw_reg_info mlxsw_reg_qtct = { + .id = MLXSW_REG_QTCT_ID, + .len = MLXSW_REG_QTCT_LEN, +}; + +/* reg_qtct_local_port + * Local port number. + * Access: Index + * + * Note: CPU port is not supported. + */ +MLXSW_ITEM32(reg, qtct, local_port, 0x00, 16, 8); + +/* reg_qtct_sub_port + * Virtual port within the physical port. + * Should be set to 0 when virtual ports are not enabled on the port. + * Access: Index + */ +MLXSW_ITEM32(reg, qtct, sub_port, 0x00, 8, 8); + +/* reg_qtct_switch_prio + * Switch priority. + * Access: Index + */ +MLXSW_ITEM32(reg, qtct, switch_prio, 0x00, 0, 4); + +/* reg_qtct_tclass + * Traffic class. + * Default values: + * switch_prio 0 : tclass 1 + * switch_prio 1 : tclass 0 + * switch_prio i : tclass i, for i > 1 + * Access: RW + */ +MLXSW_ITEM32(reg, qtct, tclass, 0x04, 0, 4); + +static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port, + u8 switch_prio, u8 tclass) +{ + MLXSW_REG_ZERO(qtct, payload); + mlxsw_reg_qtct_local_port_set(payload, local_port); + mlxsw_reg_qtct_switch_prio_set(payload, switch_prio); + mlxsw_reg_qtct_tclass_set(payload, tclass); +} + +/* QEEC - QoS ETS Element Configuration Register + * --------------------------------------------- + * Configures the ETS elements. + */ +#define MLXSW_REG_QEEC_ID 0x400D +#define MLXSW_REG_QEEC_LEN 0x1C + +static const struct mlxsw_reg_info mlxsw_reg_qeec = { + .id = MLXSW_REG_QEEC_ID, + .len = MLXSW_REG_QEEC_LEN, +}; + +/* reg_qeec_local_port + * Local port number. + * Access: Index + * + * Note: CPU port is supported. + */ +MLXSW_ITEM32(reg, qeec, local_port, 0x00, 16, 8); + +enum mlxsw_reg_qeec_hr { + MLXSW_REG_QEEC_HIERARCY_PORT, + MLXSW_REG_QEEC_HIERARCY_GROUP, + MLXSW_REG_QEEC_HIERARCY_SUBGROUP, + MLXSW_REG_QEEC_HIERARCY_TC, +}; + +/* reg_qeec_element_hierarchy + * 0 - Port + * 1 - Group + * 2 - Subgroup + * 3 - Traffic Class + * Access: Index + */ +MLXSW_ITEM32(reg, qeec, element_hierarchy, 0x04, 16, 4); + +/* reg_qeec_element_index + * The index of the element in the hierarchy. + * Access: Index + */ +MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8); + +/* reg_qeec_next_element_index + * The index of the next (lower) element in the hierarchy. + * Access: RW + * + * Note: Reserved for element_hierarchy 0. + */ +MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8); + +enum { + MLXSW_REG_QEEC_BYTES_MODE, + MLXSW_REG_QEEC_PACKETS_MODE, +}; + +/* reg_qeec_pb + * Packets or bytes mode. + * 0 - Bytes mode + * 1 - Packets mode + * Access: RW + * + * Note: Used for max shaper configuration. For Spectrum, packets mode + * is supported only for traffic classes of CPU port. + */ +MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1); + +/* reg_qeec_mase + * Max shaper configuration enable. Enables configuration of the max + * shaper on this ETS element. + * 0 - Disable + * 1 - Enable + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, mase, 0x10, 31, 1); + +/* A large max rate will disable the max shaper. */ +#define MLXSW_REG_QEEC_MAS_DIS 200000000 /* Kbps */ + +/* reg_qeec_max_shaper_rate + * Max shaper information rate. + * For CPU port, can only be configured for port hierarchy. + * When in bytes mode, value is specified in units of 1000bps. + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, max_shaper_rate, 0x10, 0, 28); + +/* reg_qeec_de + * DWRR configuration enable. Enables configuration of the dwrr and + * dwrr_weight. + * 0 - Disable + * 1 - Enable + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, de, 0x18, 31, 1); + +/* reg_qeec_dwrr + * Transmission selection algorithm to use on the link going down from + * the ETS element. + * 0 - Strict priority + * 1 - DWRR + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, dwrr, 0x18, 15, 1); + +/* reg_qeec_dwrr_weight + * DWRR weight on the link going down from the ETS element. The + * percentage of bandwidth guaranteed to an ETS element within + * its hierarchy. The sum of all weights across all ETS elements + * within one hierarchy should be equal to 100. Reserved when + * transmission selection algorithm is strict priority. + * Access: RW + */ +MLXSW_ITEM32(reg, qeec, dwrr_weight, 0x18, 0, 8); + +static inline void mlxsw_reg_qeec_pack(char *payload, u8 local_port, + enum mlxsw_reg_qeec_hr hr, u8 index, + u8 next_index) +{ + MLXSW_REG_ZERO(qeec, payload); + mlxsw_reg_qeec_local_port_set(payload, local_port); + mlxsw_reg_qeec_element_hierarchy_set(payload, hr); + mlxsw_reg_qeec_element_index_set(payload, index); + mlxsw_reg_qeec_next_element_index_set(payload, next_index); +} + /* PMLP - Ports Module to Local Port Register * ------------------------------------------ * Configures the assignment of modules to local ports. @@ -2141,6 +2319,145 @@ static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port, mlxsw_reg_paos_e_set(payload, 1); } +/* PFCC - Ports Flow Control Configuration Register + * ------------------------------------------------ + * Configures and retrieves the per port flow control configuration. + */ +#define MLXSW_REG_PFCC_ID 0x5007 +#define MLXSW_REG_PFCC_LEN 0x20 + +static const struct mlxsw_reg_info mlxsw_reg_pfcc = { + .id = MLXSW_REG_PFCC_ID, + .len = MLXSW_REG_PFCC_LEN, +}; + +/* reg_pfcc_local_port + * Local port number. + * Access: Index + */ +MLXSW_ITEM32(reg, pfcc, local_port, 0x00, 16, 8); + +/* reg_pfcc_pnat + * Port number access type. Determines the way local_port is interpreted: + * 0 - Local port number. + * 1 - IB / label port number. + * Access: Index + */ +MLXSW_ITEM32(reg, pfcc, pnat, 0x00, 14, 2); + +/* reg_pfcc_shl_cap + * Send to higher layers capabilities: + * 0 - No capability of sending Pause and PFC frames to higher layers. + * 1 - Device has capability of sending Pause and PFC frames to higher + * layers. + * Access: RO + */ +MLXSW_ITEM32(reg, pfcc, shl_cap, 0x00, 1, 1); + +/* reg_pfcc_shl_opr + * Send to higher layers operation: + * 0 - Pause and PFC frames are handled by the port (default). + * 1 - Pause and PFC frames are handled by the port and also sent to + * higher layers. Only valid if shl_cap = 1. + * Access: RW + */ +MLXSW_ITEM32(reg, pfcc, shl_opr, 0x00, 0, 1); + +/* reg_pfcc_ppan + * Pause policy auto negotiation. + * 0 - Disabled. Generate / ignore Pause frames based on pptx / pprtx. + * 1 - Enabled. When auto-negotiation is performed, set the Pause policy + * based on the auto-negotiation resolution. + * Access: RW + * + * Note: The auto-negotiation advertisement is set according to pptx and + * pprtx. When PFC is set on Tx / Rx, ppan must be set to 0. + */ +MLXSW_ITEM32(reg, pfcc, ppan, 0x04, 28, 4); + +/* reg_pfcc_prio_mask_tx + * Bit per priority indicating if Tx flow control policy should be + * updated based on bit pfctx. + * Access: WO + */ +MLXSW_ITEM32(reg, pfcc, prio_mask_tx, 0x04, 16, 8); + +/* reg_pfcc_prio_mask_rx + * Bit per priority indicating if Rx flow control policy should be + * updated based on bit pfcrx. + * Access: WO + */ +MLXSW_ITEM32(reg, pfcc, prio_mask_rx, 0x04, 0, 8); + +/* reg_pfcc_pptx + * Admin Pause policy on Tx. + * 0 - Never generate Pause frames (default). + * 1 - Generate Pause frames according to Rx buffer threshold. + * Access: RW + */ +MLXSW_ITEM32(reg, pfcc, pptx, 0x08, 31, 1); + +/* reg_pfcc_aptx + * Active (operational) Pause policy on Tx. + * 0 - Never generate Pause frames. + * 1 - Generate Pause frames according to Rx buffer threshold. + * Access: RO + */ +MLXSW_ITEM32(reg, pfcc, aptx, 0x08, 30, 1); + +/* reg_pfcc_pfctx + * Priority based flow control policy on Tx[7:0]. Per-priority bit mask: + * 0 - Never generate priority Pause frames on the specified priority + * (default). + * 1 - Generate priority Pause frames according to Rx buffer threshold on + * the specified priority. + * Access: RW + * + * Note: pfctx and pptx must be mutually exclusive. + */ +MLXSW_ITEM32(reg, pfcc, pfctx, 0x08, 16, 8); + +/* reg_pfcc_pprx + * Admin Pause policy on Rx. + * 0 - Ignore received Pause frames (default). + * 1 - Respect received Pause frames. + * Access: RW + */ +MLXSW_ITEM32(reg, pfcc, pprx, 0x0C, 31, 1); + +/* reg_pfcc_aprx + * Active (operational) Pause policy on Rx. + * 0 - Ignore received Pause frames. + * 1 - Respect received Pause frames. + * Access: RO + */ +MLXSW_ITEM32(reg, pfcc, aprx, 0x0C, 30, 1); + +/* reg_pfcc_pfcrx + * Priority based flow control policy on Rx[7:0]. Per-priority bit mask: + * 0 - Ignore incoming priority Pause frames on the specified priority + * (default). + * 1 - Respect incoming priority Pause frames on the specified priority. + * Access: RW + */ +MLXSW_ITEM32(reg, pfcc, pfcrx, 0x0C, 16, 8); + +#define MLXSW_REG_PFCC_ALL_PRIO 0xFF + +static inline void mlxsw_reg_pfcc_prio_pack(char *payload, u8 pfc_en) +{ + mlxsw_reg_pfcc_prio_mask_tx_set(payload, MLXSW_REG_PFCC_ALL_PRIO); + mlxsw_reg_pfcc_prio_mask_rx_set(payload, MLXSW_REG_PFCC_ALL_PRIO); + mlxsw_reg_pfcc_pfctx_set(payload, pfc_en); + mlxsw_reg_pfcc_pfcrx_set(payload, pfc_en); +} + +static inline void mlxsw_reg_pfcc_pack(char *payload, u8 local_port) +{ + MLXSW_REG_ZERO(pfcc, payload); + mlxsw_reg_pfcc_local_port_set(payload, local_port); +} + /* PPCNT - Ports Performance Counters Register * ------------------------------------------- * The PPCNT register retrieves per port performance counters. @@ -2180,6 +2497,11 @@ MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8); */ MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2); +enum mlxsw_reg_ppcnt_grp { + MLXSW_REG_PPCNT_IEEE_8023_CNT = 0x0, + MLXSW_REG_PPCNT_PRIO_CNT = 0x10, +}; + /* reg_ppcnt_grp * Performance counter group. * Group 63 indicates all groups. Only valid on Set() operation with @@ -2215,6 +2537,8 @@ MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1); */ MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5); +/* Ethernet IEEE 802.3 Counter Group */ + /* reg_ppcnt_a_frames_transmitted_ok * Access: RO */ @@ -2329,15 +2653,160 @@ MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received, MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted, 0x08 + 0x90, 0, 64); -static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port) +/* Ethernet Per Priority Group Counters */ + +/* reg_ppcnt_rx_octets + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, rx_octets, 0x08 + 0x00, 0, 64); + +/* reg_ppcnt_rx_frames + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, rx_frames, 0x08 + 0x20, 0, 64); + +/* reg_ppcnt_tx_octets + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tx_octets, 0x08 + 0x28, 0, 64); + +/* reg_ppcnt_tx_frames + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tx_frames, 0x08 + 0x48, 0, 64); + +/* reg_ppcnt_rx_pause + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, rx_pause, 0x08 + 0x50, 0, 64); + +/* reg_ppcnt_rx_pause_duration + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, rx_pause_duration, 0x08 + 0x58, 0, 64); + +/* reg_ppcnt_tx_pause + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tx_pause, 0x08 + 0x60, 0, 64); + +/* reg_ppcnt_tx_pause_duration + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tx_pause_duration, 0x08 + 0x68, 0, 64); + +/* reg_ppcnt_rx_pause_transition + * Access: RO + */ +MLXSW_ITEM64(reg, ppcnt, tx_pause_transition, 0x08 + 0x70, 0, 64); + +static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port, + enum mlxsw_reg_ppcnt_grp grp, + u8 prio_tc) { MLXSW_REG_ZERO(ppcnt, payload); mlxsw_reg_ppcnt_swid_set(payload, 0); mlxsw_reg_ppcnt_local_port_set(payload, local_port); mlxsw_reg_ppcnt_pnat_set(payload, 0); - mlxsw_reg_ppcnt_grp_set(payload, 0); + mlxsw_reg_ppcnt_grp_set(payload, grp); mlxsw_reg_ppcnt_clr_set(payload, 0); - mlxsw_reg_ppcnt_prio_tc_set(payload, 0); + mlxsw_reg_ppcnt_prio_tc_set(payload, prio_tc); +} + +/* PPTB - Port Prio To Buffer Register + * ----------------------------------- + * Configures the switch priority to buffer table. + */ +#define MLXSW_REG_PPTB_ID 0x500B +#define MLXSW_REG_PPTB_LEN 0x10 + +static const struct mlxsw_reg_info mlxsw_reg_pptb = { + .id = MLXSW_REG_PPTB_ID, + .len = MLXSW_REG_PPTB_LEN, +}; + +enum { + MLXSW_REG_PPTB_MM_UM, + MLXSW_REG_PPTB_MM_UNICAST, + MLXSW_REG_PPTB_MM_MULTICAST, +}; + +/* reg_pptb_mm + * Mapping mode. + * 0 - Map both unicast and multicast packets to the same buffer. + * 1 - Map only unicast packets. + * 2 - Map only multicast packets. + * Access: Index + * + * Note: SwitchX-2 only supports the first option. + */ +MLXSW_ITEM32(reg, pptb, mm, 0x00, 28, 2); + +/* reg_pptb_local_port + * Local port number. + * Access: Index + */ +MLXSW_ITEM32(reg, pptb, local_port, 0x00, 16, 8); + +/* reg_pptb_um + * Enables the update of the untagged_buf field. + * Access: RW + */ +MLXSW_ITEM32(reg, pptb, um, 0x00, 8, 1); + +/* reg_pptb_pm + * Enables the update of the prio_to_buff field. + * Bit is a flag for updating the mapping for switch priority . + * Access: RW + */ +MLXSW_ITEM32(reg, pptb, pm, 0x00, 0, 8); + +/* reg_pptb_prio_to_buff + * Mapping of switch priority to one of the allocated receive port + * buffers. + * Access: RW + */ +MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff, 0x04, 0x04, 4); + +/* reg_pptb_pm_msb + * Enables the update of the prio_to_buff field. + * Bit is a flag for updating the mapping for switch priority . + * Access: RW + */ +MLXSW_ITEM32(reg, pptb, pm_msb, 0x08, 24, 8); + +/* reg_pptb_untagged_buff + * Mapping of untagged frames to one of the allocated receive port buffers. + * Access: RW + * + * Note: In SwitchX-2 this field must be mapped to buffer 8. Reserved for + * Spectrum, as it maps untagged packets based on the default switch priority. + */ +MLXSW_ITEM32(reg, pptb, untagged_buff, 0x08, 0, 4); + +/* reg_pptb_prio_to_buff_msb + * Mapping of switch priority to one of the allocated receive port + * buffers. + * Access: RW + */ +MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff_msb, 0x0C, 0x04, 4); + +#define MLXSW_REG_PPTB_ALL_PRIO 0xFF + +static inline void mlxsw_reg_pptb_pack(char *payload, u8 local_port) +{ + MLXSW_REG_ZERO(pptb, payload); + mlxsw_reg_pptb_mm_set(payload, MLXSW_REG_PPTB_MM_UM); + mlxsw_reg_pptb_local_port_set(payload, local_port); + mlxsw_reg_pptb_pm_set(payload, MLXSW_REG_PPTB_ALL_PRIO); + mlxsw_reg_pptb_pm_msb_set(payload, MLXSW_REG_PPTB_ALL_PRIO); +} + +static inline void mlxsw_reg_pptb_prio_to_buff_pack(char *payload, u8 prio, + u8 buff) +{ + mlxsw_reg_pptb_prio_to_buff_set(payload, prio, buff); + mlxsw_reg_pptb_prio_to_buff_msb_set(payload, prio, buff); } /* PBMC - Port Buffer Management Control Register @@ -2346,7 +2815,7 @@ static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port) * allocation for different Prios, and the Pause threshold management. */ #define MLXSW_REG_PBMC_ID 0x500C -#define MLXSW_REG_PBMC_LEN 0x68 +#define MLXSW_REG_PBMC_LEN 0x6C static const struct mlxsw_reg_info mlxsw_reg_pbmc = { .id = MLXSW_REG_PBMC_ID, @@ -2374,6 +2843,8 @@ MLXSW_ITEM32(reg, pbmc, xoff_timer_value, 0x04, 16, 16); */ MLXSW_ITEM32(reg, pbmc, xoff_refresh, 0x04, 0, 16); +#define MLXSW_REG_PBMC_PORT_SHARED_BUF_IDX 11 + /* reg_pbmc_buf_lossy * The field indicates if the buffer is lossy. * 0 - Lossless @@ -2398,6 +2869,30 @@ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_epsb, 0x0C, 24, 1, 0x08, 0x00, false); */ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_size, 0x0C, 0, 16, 0x08, 0x00, false); +/* reg_pbmc_buf_xoff_threshold + * Once the amount of data in the buffer goes above this value, device + * starts sending PFC frames for all priorities associated with the + * buffer. Units are represented in cells. Reserved in case of lossy + * buffer. + * Access: RW + * + * Note: In Spectrum, reserved for buffer[9]. + */ +MLXSW_ITEM32_INDEXED(reg, pbmc, buf_xoff_threshold, 0x0C, 16, 16, + 0x08, 0x04, false); + +/* reg_pbmc_buf_xon_threshold + * When the amount of data in the buffer goes below this value, device + * stops sending PFC frames for the priorities associated with the + * buffer. Units are represented in cells. Reserved in case of lossy + * buffer. + * Access: RW + * + * Note: In Spectrum, reserved for buffer[9]. + */ +MLXSW_ITEM32_INDEXED(reg, pbmc, buf_xon_threshold, 0x0C, 0, 16, + 0x08, 0x04, false); + static inline void mlxsw_reg_pbmc_pack(char *payload, u8 local_port, u16 xoff_timer_value, u16 xoff_refresh) { @@ -2416,6 +2911,17 @@ static inline void mlxsw_reg_pbmc_lossy_buffer_pack(char *payload, mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size); } +static inline void mlxsw_reg_pbmc_lossless_buffer_pack(char *payload, + int buf_index, u16 size, + u16 threshold) +{ + mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 0); + mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0); + mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size); + mlxsw_reg_pbmc_buf_xoff_threshold_set(payload, buf_index, threshold); + mlxsw_reg_pbmc_buf_xon_threshold_set(payload, buf_index, threshold); +} + /* PSPA - Port Switch Partition Allocation * --------------------------------------- * Controls the association of a port with a switch partition and enables @@ -2985,9 +3491,10 @@ static const struct mlxsw_reg_info mlxsw_reg_sbpr = { .len = MLXSW_REG_SBPR_LEN, }; -enum mlxsw_reg_sbpr_dir { - MLXSW_REG_SBPR_DIR_INGRESS, - MLXSW_REG_SBPR_DIR_EGRESS, +/* shared direstion enum for SBPR, SBCM, SBPM */ +enum mlxsw_reg_sbxx_dir { + MLXSW_REG_SBXX_DIR_INGRESS, + MLXSW_REG_SBXX_DIR_EGRESS, }; /* reg_sbpr_dir @@ -3020,7 +3527,7 @@ enum mlxsw_reg_sbpr_mode { MLXSW_ITEM32(reg, sbpr, mode, 0x08, 0, 4); static inline void mlxsw_reg_sbpr_pack(char *payload, u8 pool, - enum mlxsw_reg_sbpr_dir dir, + enum mlxsw_reg_sbxx_dir dir, enum mlxsw_reg_sbpr_mode mode, u32 size) { MLXSW_REG_ZERO(sbpr, payload); @@ -3062,11 +3569,6 @@ MLXSW_ITEM32(reg, sbcm, local_port, 0x00, 16, 8); */ MLXSW_ITEM32(reg, sbcm, pg_buff, 0x00, 8, 6); -enum mlxsw_reg_sbcm_dir { - MLXSW_REG_SBCM_DIR_INGRESS, - MLXSW_REG_SBCM_DIR_EGRESS, -}; - /* reg_sbcm_dir * Direction. * Access: Index @@ -3079,6 +3581,10 @@ MLXSW_ITEM32(reg, sbcm, dir, 0x00, 0, 2); */ MLXSW_ITEM32(reg, sbcm, min_buff, 0x18, 0, 24); +/* shared max_buff limits for dynamic threshold for SBCM, SBPM */ +#define MLXSW_REG_SBXX_DYN_MAX_BUFF_MIN 1 +#define MLXSW_REG_SBXX_DYN_MAX_BUFF_MAX 14 + /* reg_sbcm_max_buff * When the pool associated to the port-pg/tclass is configured to * static, Maximum buffer size for the limiter configured in cells. @@ -3099,7 +3605,7 @@ MLXSW_ITEM32(reg, sbcm, max_buff, 0x1C, 0, 24); MLXSW_ITEM32(reg, sbcm, pool, 0x24, 0, 4); static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff, - enum mlxsw_reg_sbcm_dir dir, + enum mlxsw_reg_sbxx_dir dir, u32 min_buff, u32 max_buff, u8 pool) { MLXSW_REG_ZERO(sbcm, payload); @@ -3111,8 +3617,8 @@ static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff, mlxsw_reg_sbcm_pool_set(payload, pool); } -/* SBPM - Shared Buffer Class Management Register - * ---------------------------------------------- +/* SBPM - Shared Buffer Port Management Register + * --------------------------------------------- * The SBPM register configures and retrieves the shared buffer allocation * and configuration according to Port-Pool, including the definition * of the associated quota. @@ -3139,17 +3645,33 @@ MLXSW_ITEM32(reg, sbpm, local_port, 0x00, 16, 8); */ MLXSW_ITEM32(reg, sbpm, pool, 0x00, 8, 4); -enum mlxsw_reg_sbpm_dir { - MLXSW_REG_SBPM_DIR_INGRESS, - MLXSW_REG_SBPM_DIR_EGRESS, -}; - /* reg_sbpm_dir * Direction. * Access: Index */ MLXSW_ITEM32(reg, sbpm, dir, 0x00, 0, 2); +/* reg_sbpm_buff_occupancy + * Current buffer occupancy in cells. + * Access: RO + */ +MLXSW_ITEM32(reg, sbpm, buff_occupancy, 0x10, 0, 24); + +/* reg_sbpm_clr + * Clear Max Buffer Occupancy + * When this bit is set, max_buff_occupancy field is cleared (and a + * new max value is tracked from the time the clear was performed). + * Access: OP + */ +MLXSW_ITEM32(reg, sbpm, clr, 0x14, 31, 1); + +/* reg_sbpm_max_buff_occupancy + * Maximum value of buffer occupancy in cells monitored. Cleared by + * writing to the clr field. + * Access: RO + */ +MLXSW_ITEM32(reg, sbpm, max_buff_occupancy, 0x14, 0, 24); + /* reg_sbpm_min_buff * Minimum buffer size for the limiter, in cells. * Access: RW @@ -3170,17 +3692,25 @@ MLXSW_ITEM32(reg, sbpm, min_buff, 0x18, 0, 24); MLXSW_ITEM32(reg, sbpm, max_buff, 0x1C, 0, 24); static inline void mlxsw_reg_sbpm_pack(char *payload, u8 local_port, u8 pool, - enum mlxsw_reg_sbpm_dir dir, + enum mlxsw_reg_sbxx_dir dir, bool clr, u32 min_buff, u32 max_buff) { MLXSW_REG_ZERO(sbpm, payload); mlxsw_reg_sbpm_local_port_set(payload, local_port); mlxsw_reg_sbpm_pool_set(payload, pool); mlxsw_reg_sbpm_dir_set(payload, dir); + mlxsw_reg_sbpm_clr_set(payload, clr); mlxsw_reg_sbpm_min_buff_set(payload, min_buff); mlxsw_reg_sbpm_max_buff_set(payload, max_buff); } +static inline void mlxsw_reg_sbpm_unpack(char *payload, u32 *p_buff_occupancy, + u32 *p_max_buff_occupancy) +{ + *p_buff_occupancy = mlxsw_reg_sbpm_buff_occupancy_get(payload); + *p_max_buff_occupancy = mlxsw_reg_sbpm_max_buff_occupancy_get(payload); +} + /* SBMM - Shared Buffer Multicast Management Register * -------------------------------------------------- * The SBMM register configures and retrieves the shared buffer allocation @@ -3236,6 +3766,104 @@ static inline void mlxsw_reg_sbmm_pack(char *payload, u8 prio, u32 min_buff, mlxsw_reg_sbmm_pool_set(payload, pool); } +/* SBSR - Shared Buffer Status Register + * ------------------------------------ + * The SBSR register retrieves the shared buffer occupancy according to + * Port-Pool. Note that this register enables reading a large amount of data. + * It is the user's responsibility to limit the amount of data to ensure the + * response can match the maximum transfer unit. In case the response exceeds + * the maximum transport unit, it will be truncated with no special notice. + */ +#define MLXSW_REG_SBSR_ID 0xB005 +#define MLXSW_REG_SBSR_BASE_LEN 0x5C /* base length, without records */ +#define MLXSW_REG_SBSR_REC_LEN 0x8 /* record length */ +#define MLXSW_REG_SBSR_REC_MAX_COUNT 120 +#define MLXSW_REG_SBSR_LEN (MLXSW_REG_SBSR_BASE_LEN + \ + MLXSW_REG_SBSR_REC_LEN * \ + MLXSW_REG_SBSR_REC_MAX_COUNT) + +static const struct mlxsw_reg_info mlxsw_reg_sbsr = { + .id = MLXSW_REG_SBSR_ID, + .len = MLXSW_REG_SBSR_LEN, +}; + +/* reg_sbsr_clr + * Clear Max Buffer Occupancy. When this bit is set, the max_buff_occupancy + * field is cleared (and a new max value is tracked from the time the clear + * was performed). + * Access: OP + */ +MLXSW_ITEM32(reg, sbsr, clr, 0x00, 31, 1); + +/* reg_sbsr_ingress_port_mask + * Bit vector for all ingress network ports. + * Indicates which of the ports (for which the relevant bit is set) + * are affected by the set operation. Configuration of any other port + * does not change. + * Access: Index + */ +MLXSW_ITEM_BIT_ARRAY(reg, sbsr, ingress_port_mask, 0x10, 0x20, 1); + +/* reg_sbsr_pg_buff_mask + * Bit vector for all switch priority groups. + * Indicates which of the priorities (for which the relevant bit is set) + * are affected by the set operation. Configuration of any other priority + * does not change. + * Range is 0..cap_max_pg_buffers - 1 + * Access: Index + */ +MLXSW_ITEM_BIT_ARRAY(reg, sbsr, pg_buff_mask, 0x30, 0x4, 1); + +/* reg_sbsr_egress_port_mask + * Bit vector for all egress network ports. + * Indicates which of the ports (for which the relevant bit is set) + * are affected by the set operation. Configuration of any other port + * does not change. + * Access: Index + */ +MLXSW_ITEM_BIT_ARRAY(reg, sbsr, egress_port_mask, 0x34, 0x20, 1); + +/* reg_sbsr_tclass_mask + * Bit vector for all traffic classes. + * Indicates which of the traffic classes (for which the relevant bit is + * set) are affected by the set operation. Configuration of any other + * traffic class does not change. + * Range is 0..cap_max_tclass - 1 + * Access: Index + */ +MLXSW_ITEM_BIT_ARRAY(reg, sbsr, tclass_mask, 0x54, 0x8, 1); + +static inline void mlxsw_reg_sbsr_pack(char *payload, bool clr) +{ + MLXSW_REG_ZERO(sbsr, payload); + mlxsw_reg_sbsr_clr_set(payload, clr); +} + +/* reg_sbsr_rec_buff_occupancy + * Current buffer occupancy in cells. + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, sbsr, rec_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN, + 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x00, false); + +/* reg_sbsr_rec_max_buff_occupancy + * Maximum value of buffer occupancy in cells monitored. Cleared by + * writing to the clr field. + * Access: RO + */ +MLXSW_ITEM32_INDEXED(reg, sbsr, rec_max_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN, + 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x04, false); + +static inline void mlxsw_reg_sbsr_rec_unpack(char *payload, int rec_index, + u32 *p_buff_occupancy, + u32 *p_max_buff_occupancy) +{ + *p_buff_occupancy = + mlxsw_reg_sbsr_rec_buff_occupancy_get(payload, rec_index); + *p_max_buff_occupancy = + mlxsw_reg_sbsr_rec_max_buff_occupancy_get(payload, rec_index); +} + static inline const char *mlxsw_reg_id_str(u16 reg_id) { switch (reg_id) { @@ -3283,6 +3911,10 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "SFMR"; case MLXSW_REG_SPVMLR_ID: return "SPVMLR"; + case MLXSW_REG_QTCT_ID: + return "QTCT"; + case MLXSW_REG_QEEC_ID: + return "QEEC"; case MLXSW_REG_PMLP_ID: return "PMLP"; case MLXSW_REG_PMTU_ID: @@ -3293,8 +3925,12 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "PPAD"; case MLXSW_REG_PAOS_ID: return "PAOS"; + case MLXSW_REG_PFCC_ID: + return "PFCC"; case MLXSW_REG_PPCNT_ID: return "PPCNT"; + case MLXSW_REG_PPTB_ID: + return "PPTB"; case MLXSW_REG_PBMC_ID: return "PBMC"; case MLXSW_REG_PSPA_ID: @@ -3323,6 +3959,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "SBPM"; case MLXSW_REG_SBMM_ID: return "SBMM"; + case MLXSW_REG_SBSR_ID: + return "SBSR"; default: return "*UNKNOWN*"; } -- cgit v1.2.3-54-g00ecf