From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/net/ethernet/ti/tlan.c | 3293 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3293 insertions(+) create mode 100644 drivers/net/ethernet/ti/tlan.c (limited to 'drivers/net/ethernet/ti/tlan.c') diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c new file mode 100644 index 000000000..691ec936e --- /dev/null +++ b/drivers/net/ethernet/ti/tlan.c @@ -0,0 +1,3293 @@ +/******************************************************************************* + * + * Linux ThunderLAN Driver + * + * tlan.c + * by James Banks + * + * (C) 1997-1998 Caldera, Inc. + * (C) 1998 James Banks + * (C) 1999-2001 Torben Mathiasen + * (C) 2002 Samuel Chessman + * + * This software may be used and distributed according to the terms + * of the GNU General Public License, incorporated herein by reference. + * + ** Useful (if not required) reading: + * + * Texas Instruments, ThunderLAN Programmer's Guide, + * TI Literature Number SPWU013A + * available in PDF format from www.ti.com + * Level One, LXT901 and LXT970 Data Sheets + * available in PDF format from www.level1.com + * National Semiconductor, DP83840A Data Sheet + * available in PDF format from www.national.com + * Microchip Technology, 24C01A/02A/04A Data Sheet + * available in PDF format from www.microchip.com + * + ******************************************************************************/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tlan.h" + + +/* For removing EISA devices */ +static struct net_device *tlan_eisa_devices; + +static int tlan_devices_installed; + +/* Set speed, duplex and aui settings */ +static int aui[MAX_TLAN_BOARDS]; +static int duplex[MAX_TLAN_BOARDS]; +static int speed[MAX_TLAN_BOARDS]; +static int boards_found; +module_param_array(aui, int, NULL, 0); +module_param_array(duplex, int, NULL, 0); +module_param_array(speed, int, NULL, 0); +MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)"); +MODULE_PARM_DESC(duplex, + "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); +MODULE_PARM_DESC(speed, "ThunderLAN port speed setting(s) (0,10,100)"); + +MODULE_AUTHOR("Maintainer: Samuel Chessman "); +MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); +MODULE_LICENSE("GPL"); + +/* Turn on debugging. See Documentation/networking/tlan.txt for details */ +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "ThunderLAN debug mask"); + +static const char tlan_signature[] = "TLAN"; +static const char tlan_banner[] = "ThunderLAN driver v1.17\n"; +static int tlan_have_pci; +static int tlan_have_eisa; + +static const char * const media[] = { + "10BaseT-HD", "10BaseT-FD", "100baseTx-HD", + "100BaseTx-FD", "100BaseT4", NULL +}; + +static struct board { + const char *device_label; + u32 flags; + u16 addr_ofs; +} board_info[] = { + { "Compaq Netelligent 10 T PCI UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, + { "Compaq Netelligent 10/100 TX PCI UTP", + TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, + { "Compaq Integrated NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq NetFlex-3/P", + TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, + { "Compaq NetFlex-3/P", TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq Netelligent Integrated 10/100 TX UTP", + TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, + { "Compaq Netelligent Dual 10/100 TX PCI UTP", + TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq Netelligent 10/100 TX Embedded UTP", + TLAN_ADAPTER_NONE, 0x83 }, + { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 }, + { "Olicom OC-2325", TLAN_ADAPTER_ACTIVITY_LED | + TLAN_ADAPTER_UNMANAGED_PHY, 0xf8 }, + { "Olicom OC-2326", TLAN_ADAPTER_ACTIVITY_LED | + TLAN_ADAPTER_USE_INTERN_10, 0xf8 }, + { "Compaq Netelligent 10/100 TX UTP", TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, + { "Compaq Netelligent 10 T/2 PCI UTP/coax", TLAN_ADAPTER_NONE, 0x83 }, + { "Compaq NetFlex-3/E", + TLAN_ADAPTER_ACTIVITY_LED | /* EISA card */ + TLAN_ADAPTER_UNMANAGED_PHY | TLAN_ADAPTER_BIT_RATE_PHY, 0x83 }, + { "Compaq NetFlex-3/E", + TLAN_ADAPTER_ACTIVITY_LED, 0x83 }, /* EISA card */ +}; + +static const struct pci_device_id tlan_pci_tbl[] = { + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL10, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_THUNDER, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETFLEX3B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100PI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_NETEL100I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, + { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2183, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, + { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2325, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, + { PCI_VENDOR_ID_OLICOM, PCI_DEVICE_ID_OLICOM_OC2326, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_100_WS_5100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, + { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_NETELLIGENT_10_T2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, + { 0,} +}; +MODULE_DEVICE_TABLE(pci, tlan_pci_tbl); + +static void tlan_eisa_probe(void); +static void tlan_eisa_cleanup(void); +static int tlan_init(struct net_device *); +static int tlan_open(struct net_device *dev); +static netdev_tx_t tlan_start_tx(struct sk_buff *, struct net_device *); +static irqreturn_t tlan_handle_interrupt(int, void *); +static int tlan_close(struct net_device *); +static struct net_device_stats *tlan_get_stats(struct net_device *); +static void tlan_set_multicast_list(struct net_device *); +static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int tlan_probe1(struct pci_dev *pdev, long ioaddr, + int irq, int rev, const struct pci_device_id *ent); +static void tlan_tx_timeout(struct net_device *dev); +static void tlan_tx_timeout_work(struct work_struct *work); +static int tlan_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent); + +static u32 tlan_handle_tx_eof(struct net_device *, u16); +static u32 tlan_handle_stat_overflow(struct net_device *, u16); +static u32 tlan_handle_rx_eof(struct net_device *, u16); +static u32 tlan_handle_dummy(struct net_device *, u16); +static u32 tlan_handle_tx_eoc(struct net_device *, u16); +static u32 tlan_handle_status_check(struct net_device *, u16); +static u32 tlan_handle_rx_eoc(struct net_device *, u16); + +static void tlan_timer(unsigned long); + +static void tlan_reset_lists(struct net_device *); +static void tlan_free_lists(struct net_device *); +static void tlan_print_dio(u16); +static void tlan_print_list(struct tlan_list *, char *, int); +static void tlan_read_and_clear_stats(struct net_device *, int); +static void tlan_reset_adapter(struct net_device *); +static void tlan_finish_reset(struct net_device *); +static void tlan_set_mac(struct net_device *, int areg, char *mac); + +static void tlan_phy_print(struct net_device *); +static void tlan_phy_detect(struct net_device *); +static void tlan_phy_power_down(struct net_device *); +static void tlan_phy_power_up(struct net_device *); +static void tlan_phy_reset(struct net_device *); +static void tlan_phy_start_link(struct net_device *); +static void tlan_phy_finish_auto_neg(struct net_device *); +static void tlan_phy_monitor(unsigned long); + +/* + static int tlan_phy_nop(struct net_device *); + static int tlan_phy_internal_check(struct net_device *); + static int tlan_phy_internal_service(struct net_device *); + static int tlan_phy_dp83840a_check(struct net_device *); +*/ + +static bool tlan_mii_read_reg(struct net_device *, u16, u16, u16 *); +static void tlan_mii_send_data(u16, u32, unsigned); +static void tlan_mii_sync(u16); +static void tlan_mii_write_reg(struct net_device *, u16, u16, u16); + +static void tlan_ee_send_start(u16); +static int tlan_ee_send_byte(u16, u8, int); +static void tlan_ee_receive_byte(u16, u8 *, int); +static int tlan_ee_read_byte(struct net_device *, u8, u8 *); + + +static inline void +tlan_store_skb(struct tlan_list *tag, struct sk_buff *skb) +{ + unsigned long addr = (unsigned long)skb; + tag->buffer[9].address = addr; + tag->buffer[8].address = upper_32_bits(addr); +} + +static inline struct sk_buff * +tlan_get_skb(const struct tlan_list *tag) +{ + unsigned long addr; + + addr = tag->buffer[9].address; + addr |= ((unsigned long) tag->buffer[8].address << 16) << 16; + return (struct sk_buff *) addr; +} + +static u32 +(*tlan_int_vector[TLAN_INT_NUMBER_OF_INTS])(struct net_device *, u16) = { + NULL, + tlan_handle_tx_eof, + tlan_handle_stat_overflow, + tlan_handle_rx_eof, + tlan_handle_dummy, + tlan_handle_tx_eoc, + tlan_handle_status_check, + tlan_handle_rx_eoc +}; + +static inline void +tlan_set_timer(struct net_device *dev, u32 ticks, u32 type) +{ + struct tlan_priv *priv = netdev_priv(dev); + unsigned long flags = 0; + + if (!in_irq()) + spin_lock_irqsave(&priv->lock, flags); + if (priv->timer.function != NULL && + priv->timer_type != TLAN_TIMER_ACTIVITY) { + if (!in_irq()) + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + priv->timer.function = tlan_timer; + if (!in_irq()) + spin_unlock_irqrestore(&priv->lock, flags); + + priv->timer.data = (unsigned long) dev; + priv->timer_set_at = jiffies; + priv->timer_type = type; + mod_timer(&priv->timer, jiffies + ticks); + +} + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver primary functions + +these functions are more or less common to all linux network drivers. + +****************************************************************************** +*****************************************************************************/ + + + + + +/*************************************************************** + * tlan_remove_one + * + * Returns: + * Nothing + * Parms: + * None + * + * Goes through the TLanDevices list and frees the device + * structs and memory associated with each device (lists + * and buffers). It also ureserves the IO port regions + * associated with this device. + * + **************************************************************/ + + +static void tlan_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct tlan_priv *priv = netdev_priv(dev); + + unregister_netdev(dev); + + if (priv->dma_storage) { + pci_free_consistent(priv->pci_dev, + priv->dma_size, priv->dma_storage, + priv->dma_storage_dma); + } + +#ifdef CONFIG_PCI + pci_release_regions(pdev); +#endif + + free_netdev(dev); + + cancel_work_sync(&priv->tlan_tqueue); +} + +static void tlan_start(struct net_device *dev) +{ + tlan_reset_lists(dev); + /* NOTE: It might not be necessary to read the stats before a + reset if you don't care what the values are. + */ + tlan_read_and_clear_stats(dev, TLAN_IGNORE); + tlan_reset_adapter(dev); + netif_wake_queue(dev); +} + +static void tlan_stop(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + + del_timer_sync(&priv->media_timer); + tlan_read_and_clear_stats(dev, TLAN_RECORD); + outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); + /* Reset and power down phy */ + tlan_reset_adapter(dev); + if (priv->timer.function != NULL) { + del_timer_sync(&priv->timer); + priv->timer.function = NULL; + } +} + +#ifdef CONFIG_PM + +static int tlan_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (netif_running(dev)) + tlan_stop(dev); + + netif_device_detach(dev); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int tlan_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + int rc = pci_enable_device(pdev); + + if (rc) + return rc; + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + netif_device_attach(dev); + + if (netif_running(dev)) + tlan_start(dev); + + return 0; +} + +#else /* CONFIG_PM */ + +#define tlan_suspend NULL +#define tlan_resume NULL + +#endif /* CONFIG_PM */ + + +static struct pci_driver tlan_driver = { + .name = "tlan", + .id_table = tlan_pci_tbl, + .probe = tlan_init_one, + .remove = tlan_remove_one, + .suspend = tlan_suspend, + .resume = tlan_resume, +}; + +static int __init tlan_probe(void) +{ + int rc = -ENODEV; + + pr_info("%s", tlan_banner); + + TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n"); + + /* Use new style PCI probing. Now the kernel will + do most of this for us */ + rc = pci_register_driver(&tlan_driver); + + if (rc != 0) { + pr_err("Could not register pci driver\n"); + goto err_out_pci_free; + } + + TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n"); + tlan_eisa_probe(); + + pr_info("%d device%s installed, PCI: %d EISA: %d\n", + tlan_devices_installed, tlan_devices_installed == 1 ? "" : "s", + tlan_have_pci, tlan_have_eisa); + + if (tlan_devices_installed == 0) { + rc = -ENODEV; + goto err_out_pci_unreg; + } + return 0; + +err_out_pci_unreg: + pci_unregister_driver(&tlan_driver); +err_out_pci_free: + return rc; +} + + +static int tlan_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + return tlan_probe1(pdev, -1, -1, 0, ent); +} + + +/* +*************************************************************** +* tlan_probe1 +* +* Returns: +* 0 on success, error code on error +* Parms: +* none +* +* The name is lower case to fit in with all the rest of +* the netcard_probe names. This function looks for +* another TLan based adapter, setting it up with the +* allocated device struct if one is found. +* tlan_probe has been ported to the new net API and +* now allocates its own device structure. This function +* is also used by modules. +* +**************************************************************/ + +static int tlan_probe1(struct pci_dev *pdev, long ioaddr, int irq, int rev, + const struct pci_device_id *ent) +{ + + struct net_device *dev; + struct tlan_priv *priv; + u16 device_id; + int reg, rc = -ENODEV; + +#ifdef CONFIG_PCI + if (pdev) { + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, tlan_signature); + if (rc) { + pr_err("Could not reserve IO regions\n"); + goto err_out; + } + } +#endif /* CONFIG_PCI */ + + dev = alloc_etherdev(sizeof(struct tlan_priv)); + if (dev == NULL) { + rc = -ENOMEM; + goto err_out_regions; + } + SET_NETDEV_DEV(dev, &pdev->dev); + + priv = netdev_priv(dev); + + priv->pci_dev = pdev; + priv->dev = dev; + + /* Is this a PCI device? */ + if (pdev) { + u32 pci_io_base = 0; + + priv->adapter = &board_info[ent->driver_data]; + + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) { + pr_err("No suitable PCI mapping available\n"); + goto err_out_free_dev; + } + + for (reg = 0; reg <= 5; reg++) { + if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) { + pci_io_base = pci_resource_start(pdev, reg); + TLAN_DBG(TLAN_DEBUG_GNRL, + "IO mapping is available at %x.\n", + pci_io_base); + break; + } + } + if (!pci_io_base) { + pr_err("No IO mappings available\n"); + rc = -EIO; + goto err_out_free_dev; + } + + dev->base_addr = pci_io_base; + dev->irq = pdev->irq; + priv->adapter_rev = pdev->revision; + pci_set_master(pdev); + pci_set_drvdata(pdev, dev); + + } else { /* EISA card */ + /* This is a hack. We need to know which board structure + * is suited for this adapter */ + device_id = inw(ioaddr + EISA_ID2); + if (device_id == 0x20F1) { + priv->adapter = &board_info[13]; /* NetFlex-3/E */ + priv->adapter_rev = 23; /* TLAN 2.3 */ + } else { + priv->adapter = &board_info[14]; + priv->adapter_rev = 10; /* TLAN 1.0 */ + } + dev->base_addr = ioaddr; + dev->irq = irq; + } + + /* Kernel parameters */ + if (dev->mem_start) { + priv->aui = dev->mem_start & 0x01; + priv->duplex = ((dev->mem_start & 0x06) == 0x06) ? 0 + : (dev->mem_start & 0x06) >> 1; + priv->speed = ((dev->mem_start & 0x18) == 0x18) ? 0 + : (dev->mem_start & 0x18) >> 3; + + if (priv->speed == 0x1) + priv->speed = TLAN_SPEED_10; + else if (priv->speed == 0x2) + priv->speed = TLAN_SPEED_100; + + debug = priv->debug = dev->mem_end; + } else { + priv->aui = aui[boards_found]; + priv->speed = speed[boards_found]; + priv->duplex = duplex[boards_found]; + priv->debug = debug; + } + + /* This will be used when we get an adapter error from + * within our irq handler */ + INIT_WORK(&priv->tlan_tqueue, tlan_tx_timeout_work); + + spin_lock_init(&priv->lock); + + rc = tlan_init(dev); + if (rc) { + pr_err("Could not set up device\n"); + goto err_out_free_dev; + } + + rc = register_netdev(dev); + if (rc) { + pr_err("Could not register device\n"); + goto err_out_uninit; + } + + + tlan_devices_installed++; + boards_found++; + + /* pdev is NULL if this is an EISA device */ + if (pdev) + tlan_have_pci++; + else { + priv->next_device = tlan_eisa_devices; + tlan_eisa_devices = dev; + tlan_have_eisa++; + } + + netdev_info(dev, "irq=%2d, io=%04x, %s, Rev. %d\n", + (int)dev->irq, + (int)dev->base_addr, + priv->adapter->device_label, + priv->adapter_rev); + return 0; + +err_out_uninit: + pci_free_consistent(priv->pci_dev, priv->dma_size, priv->dma_storage, + priv->dma_storage_dma); +err_out_free_dev: + free_netdev(dev); +err_out_regions: +#ifdef CONFIG_PCI + if (pdev) + pci_release_regions(pdev); +#endif +err_out: + if (pdev) + pci_disable_device(pdev); + return rc; +} + + +static void tlan_eisa_cleanup(void) +{ + struct net_device *dev; + struct tlan_priv *priv; + + while (tlan_have_eisa) { + dev = tlan_eisa_devices; + priv = netdev_priv(dev); + if (priv->dma_storage) { + pci_free_consistent(priv->pci_dev, priv->dma_size, + priv->dma_storage, + priv->dma_storage_dma); + } + release_region(dev->base_addr, 0x10); + unregister_netdev(dev); + tlan_eisa_devices = priv->next_device; + free_netdev(dev); + tlan_have_eisa--; + } +} + + +static void __exit tlan_exit(void) +{ + pci_unregister_driver(&tlan_driver); + + if (tlan_have_eisa) + tlan_eisa_cleanup(); + +} + + +/* Module loading/unloading */ +module_init(tlan_probe); +module_exit(tlan_exit); + + + +/************************************************************** + * tlan_eisa_probe + * + * Returns: 0 on success, 1 otherwise + * + * Parms: None + * + * + * This functions probes for EISA devices and calls + * TLan_probe1 when one is found. + * + *************************************************************/ + +static void __init tlan_eisa_probe(void) +{ + long ioaddr; + int rc = -ENODEV; + int irq; + u16 device_id; + + if (!EISA_bus) { + TLAN_DBG(TLAN_DEBUG_PROBE, "No EISA bus present\n"); + return; + } + + /* Loop through all slots of the EISA bus */ + for (ioaddr = 0x1000; ioaddr < 0x9000; ioaddr += 0x1000) { + + TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n", + (int) ioaddr + 0xc80, inw(ioaddr + EISA_ID)); + TLAN_DBG(TLAN_DEBUG_PROBE, "EISA_ID 0x%4x: 0x%4x\n", + (int) ioaddr + 0xc82, inw(ioaddr + EISA_ID2)); + + + TLAN_DBG(TLAN_DEBUG_PROBE, + "Probing for EISA adapter at IO: 0x%4x : ", + (int) ioaddr); + if (request_region(ioaddr, 0x10, tlan_signature) == NULL) + goto out; + + if (inw(ioaddr + EISA_ID) != 0x110E) { + release_region(ioaddr, 0x10); + goto out; + } + + device_id = inw(ioaddr + EISA_ID2); + if (device_id != 0x20F1 && device_id != 0x40F1) { + release_region(ioaddr, 0x10); + goto out; + } + + /* check if adapter is enabled */ + if (inb(ioaddr + EISA_CR) != 0x1) { + release_region(ioaddr, 0x10); + goto out2; + } + + if (debug == 0x10) + pr_info("Found one\n"); + + + /* Get irq from board */ + switch (inb(ioaddr + 0xcc0)) { + case(0x10): + irq = 5; + break; + case(0x20): + irq = 9; + break; + case(0x40): + irq = 10; + break; + case(0x80): + irq = 11; + break; + default: + goto out; + } + + + /* Setup the newly found eisa adapter */ + rc = tlan_probe1(NULL, ioaddr, irq, + 12, NULL); + continue; + +out: + if (debug == 0x10) + pr_info("None found\n"); + continue; + +out2: + if (debug == 0x10) + pr_info("Card found but it is not enabled, skipping\n"); + continue; + + } + +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tlan_poll(struct net_device *dev) +{ + disable_irq(dev->irq); + tlan_handle_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +static const struct net_device_ops tlan_netdev_ops = { + .ndo_open = tlan_open, + .ndo_stop = tlan_close, + .ndo_start_xmit = tlan_start_tx, + .ndo_tx_timeout = tlan_tx_timeout, + .ndo_get_stats = tlan_get_stats, + .ndo_set_rx_mode = tlan_set_multicast_list, + .ndo_do_ioctl = tlan_ioctl, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tlan_poll, +#endif +}; + +static void tlan_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct tlan_priv *priv = netdev_priv(dev); + + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + if (priv->pci_dev) + strlcpy(info->bus_info, pci_name(priv->pci_dev), + sizeof(info->bus_info)); + else + strlcpy(info->bus_info, "EISA", sizeof(info->bus_info)); + info->eedump_len = TLAN_EEPROM_SIZE; +} + +static int tlan_get_eeprom_len(struct net_device *dev) +{ + return TLAN_EEPROM_SIZE; +} + +static int tlan_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *eeprom, u8 *data) +{ + int i; + + for (i = 0; i < TLAN_EEPROM_SIZE; i++) + if (tlan_ee_read_byte(dev, i, &data[i])) + return -EIO; + + return 0; +} + +static const struct ethtool_ops tlan_ethtool_ops = { + .get_drvinfo = tlan_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_eeprom_len = tlan_get_eeprom_len, + .get_eeprom = tlan_get_eeprom, +}; + +/*************************************************************** + * tlan_init + * + * Returns: + * 0 on success, error code otherwise. + * Parms: + * dev The structure of the device to be + * init'ed. + * + * This function completes the initialization of the + * device structure and driver. It reserves the IO + * addresses, allocates memory for the lists and bounce + * buffers, retrieves the MAC address from the eeprom + * and assignes the device's methods. + * + **************************************************************/ + +static int tlan_init(struct net_device *dev) +{ + int dma_size; + int err; + int i; + struct tlan_priv *priv; + + priv = netdev_priv(dev); + + dma_size = (TLAN_NUM_RX_LISTS + TLAN_NUM_TX_LISTS) + * (sizeof(struct tlan_list)); + priv->dma_storage = pci_alloc_consistent(priv->pci_dev, + dma_size, + &priv->dma_storage_dma); + priv->dma_size = dma_size; + + if (priv->dma_storage == NULL) { + pr_err("Could not allocate lists and buffers for %s\n", + dev->name); + return -ENOMEM; + } + memset(priv->dma_storage, 0, dma_size); + priv->rx_list = (struct tlan_list *) + ALIGN((unsigned long)priv->dma_storage, 8); + priv->rx_list_dma = ALIGN(priv->dma_storage_dma, 8); + priv->tx_list = priv->rx_list + TLAN_NUM_RX_LISTS; + priv->tx_list_dma = + priv->rx_list_dma + sizeof(struct tlan_list)*TLAN_NUM_RX_LISTS; + + err = 0; + for (i = 0; i < ETH_ALEN; i++) + err |= tlan_ee_read_byte(dev, + (u8) priv->adapter->addr_ofs + i, + (u8 *) &dev->dev_addr[i]); + if (err) { + pr_err("%s: Error reading MAC from eeprom: %d\n", + dev->name, err); + } + /* Olicom OC-2325/OC-2326 have the address byte-swapped */ + if (priv->adapter->addr_ofs == 0xf8) { + for (i = 0; i < ETH_ALEN; i += 2) { + char tmp = dev->dev_addr[i]; + dev->dev_addr[i] = dev->dev_addr[i + 1]; + dev->dev_addr[i + 1] = tmp; + } + } + + netif_carrier_off(dev); + + /* Device methods */ + dev->netdev_ops = &tlan_netdev_ops; + dev->ethtool_ops = &tlan_ethtool_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + return 0; + +} + + + + +/*************************************************************** + * tlan_open + * + * Returns: + * 0 on success, error code otherwise. + * Parms: + * dev Structure of device to be opened. + * + * This routine puts the driver and TLAN adapter in a + * state where it is ready to send and receive packets. + * It allocates the IRQ, resets and brings the adapter + * out of reset, and allows interrupts. It also delays + * the startup for autonegotiation or sends a Rx GO + * command to the adapter, as appropriate. + * + **************************************************************/ + +static int tlan_open(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + int err; + + priv->tlan_rev = tlan_dio_read8(dev->base_addr, TLAN_DEF_REVISION); + err = request_irq(dev->irq, tlan_handle_interrupt, IRQF_SHARED, + dev->name, dev); + + if (err) { + netdev_err(dev, "Cannot open because IRQ %d is already in use\n", + dev->irq); + return err; + } + + init_timer(&priv->timer); + init_timer(&priv->media_timer); + + tlan_start(dev); + + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Opened. TLAN Chip Rev: %x\n", + dev->name, priv->tlan_rev); + + return 0; + +} + + + +/************************************************************** + * tlan_ioctl + * + * Returns: + * 0 on success, error code otherwise + * Params: + * dev structure of device to receive ioctl. + * + * rq ifreq structure to hold userspace data. + * + * cmd ioctl command. + * + * + *************************************************************/ + +static int tlan_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct tlan_priv *priv = netdev_priv(dev); + struct mii_ioctl_data *data = if_mii(rq); + u32 phy = priv->phy[priv->phy_num]; + + if (!priv->phy_online) + return -EAGAIN; + + switch (cmd) { + case SIOCGMIIPHY: /* get address of MII PHY in use. */ + data->phy_id = phy; + + + case SIOCGMIIREG: /* read MII PHY register. */ + tlan_mii_read_reg(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f, &data->val_out); + return 0; + + + case SIOCSMIIREG: /* write MII PHY register. */ + tlan_mii_write_reg(dev, data->phy_id & 0x1f, + data->reg_num & 0x1f, data->val_in); + return 0; + default: + return -EOPNOTSUPP; + } +} + + +/*************************************************************** + * tlan_tx_timeout + * + * Returns: nothing + * + * Params: + * dev structure of device which timed out + * during transmit. + * + **************************************************************/ + +static void tlan_tx_timeout(struct net_device *dev) +{ + + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Transmit timed out.\n", dev->name); + + /* Ok so we timed out, lets see what we can do about it...*/ + tlan_free_lists(dev); + tlan_reset_lists(dev); + tlan_read_and_clear_stats(dev, TLAN_IGNORE); + tlan_reset_adapter(dev); + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); + +} + + +/*************************************************************** + * tlan_tx_timeout_work + * + * Returns: nothing + * + * Params: + * work work item of device which timed out + * + **************************************************************/ + +static void tlan_tx_timeout_work(struct work_struct *work) +{ + struct tlan_priv *priv = + container_of(work, struct tlan_priv, tlan_tqueue); + + tlan_tx_timeout(priv->dev); +} + + + +/*************************************************************** + * tlan_start_tx + * + * Returns: + * 0 on success, non-zero on failure. + * Parms: + * skb A pointer to the sk_buff containing the + * frame to be sent. + * dev The device to send the data on. + * + * This function adds a frame to the Tx list to be sent + * ASAP. First it verifies that the adapter is ready and + * there is room in the queue. Then it sets up the next + * available list, copies the frame to the corresponding + * buffer. If the adapter Tx channel is idle, it gives + * the adapter a Tx Go command on the list, otherwise it + * sets the forward address of the previous list to point + * to this one. Then it frees the sk_buff. + * + **************************************************************/ + +static netdev_tx_t tlan_start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + dma_addr_t tail_list_phys; + struct tlan_list *tail_list; + unsigned long flags; + unsigned int txlen; + + if (!priv->phy_online) { + TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n", + dev->name); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb_padto(skb, TLAN_MIN_FRAME_SIZE)) + return NETDEV_TX_OK; + txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE); + + tail_list = priv->tx_list + priv->tx_tail; + tail_list_phys = + priv->tx_list_dma + sizeof(struct tlan_list)*priv->tx_tail; + + if (tail_list->c_stat != TLAN_CSTAT_UNUSED) { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: %s is busy (Head=%d Tail=%d)\n", + dev->name, priv->tx_head, priv->tx_tail); + netif_stop_queue(dev); + priv->tx_busy_count++; + return NETDEV_TX_BUSY; + } + + tail_list->forward = 0; + + tail_list->buffer[0].address = pci_map_single(priv->pci_dev, + skb->data, txlen, + PCI_DMA_TODEVICE); + tlan_store_skb(tail_list, skb); + + tail_list->frame_size = (u16) txlen; + tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen; + tail_list->buffer[1].count = 0; + tail_list->buffer[1].address = 0; + + spin_lock_irqsave(&priv->lock, flags); + tail_list->c_stat = TLAN_CSTAT_READY; + if (!priv->tx_in_progress) { + priv->tx_in_progress = 1; + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: Starting TX on buffer %d\n", + priv->tx_tail); + outl(tail_list_phys, dev->base_addr + TLAN_CH_PARM); + outl(TLAN_HC_GO, dev->base_addr + TLAN_HOST_CMD); + } else { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: Adding buffer %d to TX channel\n", + priv->tx_tail); + if (priv->tx_tail == 0) { + (priv->tx_list + (TLAN_NUM_TX_LISTS - 1))->forward + = tail_list_phys; + } else { + (priv->tx_list + (priv->tx_tail - 1))->forward + = tail_list_phys; + } + } + spin_unlock_irqrestore(&priv->lock, flags); + + CIRC_INC(priv->tx_tail, TLAN_NUM_TX_LISTS); + + return NETDEV_TX_OK; + +} + + + + +/*************************************************************** + * tlan_handle_interrupt + * + * Returns: + * Nothing + * Parms: + * irq The line on which the interrupt + * occurred. + * dev_id A pointer to the device assigned to + * this irq line. + * + * This function handles an interrupt generated by its + * assigned TLAN adapter. The function deactivates + * interrupts on its adapter, records the type of + * interrupt, executes the appropriate subhandler, and + * acknowdges the interrupt to the adapter (thus + * re-enabling adapter interrupts. + * + **************************************************************/ + +static irqreturn_t tlan_handle_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct tlan_priv *priv = netdev_priv(dev); + u16 host_int; + u16 type; + + spin_lock(&priv->lock); + + host_int = inw(dev->base_addr + TLAN_HOST_INT); + type = (host_int & TLAN_HI_IT_MASK) >> 2; + if (type) { + u32 ack; + u32 host_cmd; + + outw(host_int, dev->base_addr + TLAN_HOST_INT); + ack = tlan_int_vector[type](dev, host_int); + + if (ack) { + host_cmd = TLAN_HC_ACK | ack | (type << 18); + outl(host_cmd, dev->base_addr + TLAN_HOST_CMD); + } + } + + spin_unlock(&priv->lock); + + return IRQ_RETVAL(type); +} + + + + +/*************************************************************** + * tlan_close + * + * Returns: + * An error code. + * Parms: + * dev The device structure of the device to + * close. + * + * This function shuts down the adapter. It records any + * stats, puts the adapter into reset state, deactivates + * its time as needed, and frees the irq it is using. + * + **************************************************************/ + +static int tlan_close(struct net_device *dev) +{ + tlan_stop(dev); + + free_irq(dev->irq, dev); + tlan_free_lists(dev); + TLAN_DBG(TLAN_DEBUG_GNRL, "Device %s closed.\n", dev->name); + + return 0; + +} + + + + +/*************************************************************** + * tlan_get_stats + * + * Returns: + * A pointer to the device's statistics structure. + * Parms: + * dev The device structure to return the + * stats for. + * + * This function updates the devices statistics by reading + * the TLAN chip's onboard registers. Then it returns the + * address of the statistics structure. + * + **************************************************************/ + +static struct net_device_stats *tlan_get_stats(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + int i; + + /* Should only read stats if open ? */ + tlan_read_and_clear_stats(dev, TLAN_RECORD); + + TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: %s EOC count = %d\n", dev->name, + priv->rx_eoc_count); + TLAN_DBG(TLAN_DEBUG_TX, "TRANSMIT: %s Busy count = %d\n", dev->name, + priv->tx_busy_count); + if (debug & TLAN_DEBUG_GNRL) { + tlan_print_dio(dev->base_addr); + tlan_phy_print(dev); + } + if (debug & TLAN_DEBUG_LIST) { + for (i = 0; i < TLAN_NUM_RX_LISTS; i++) + tlan_print_list(priv->rx_list + i, "RX", i); + for (i = 0; i < TLAN_NUM_TX_LISTS; i++) + tlan_print_list(priv->tx_list + i, "TX", i); + } + + return &dev->stats; + +} + + + + +/*************************************************************** + * tlan_set_multicast_list + * + * Returns: + * Nothing + * Parms: + * dev The device structure to set the + * multicast list for. + * + * This function sets the TLAN adaptor to various receive + * modes. If the IFF_PROMISC flag is set, promiscuous + * mode is acitviated. Otherwise, promiscuous mode is + * turned off. If the IFF_ALLMULTI flag is set, then + * the hash table is set to receive all group addresses. + * Otherwise, the first three multicast addresses are + * stored in AREG_1-3, and the rest are selected via the + * hash table, as necessary. + * + **************************************************************/ + +static void tlan_set_multicast_list(struct net_device *dev) +{ + struct netdev_hw_addr *ha; + u32 hash1 = 0; + u32 hash2 = 0; + int i; + u32 offset; + u8 tmp; + + if (dev->flags & IFF_PROMISC) { + tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD); + tlan_dio_write8(dev->base_addr, + TLAN_NET_CMD, tmp | TLAN_NET_CMD_CAF); + } else { + tmp = tlan_dio_read8(dev->base_addr, TLAN_NET_CMD); + tlan_dio_write8(dev->base_addr, + TLAN_NET_CMD, tmp & ~TLAN_NET_CMD_CAF); + if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < 3; i++) + tlan_set_mac(dev, i + 1, NULL); + tlan_dio_write32(dev->base_addr, TLAN_HASH_1, + 0xffffffff); + tlan_dio_write32(dev->base_addr, TLAN_HASH_2, + 0xffffffff); + } else { + i = 0; + netdev_for_each_mc_addr(ha, dev) { + if (i < 3) { + tlan_set_mac(dev, i + 1, + (char *) &ha->addr); + } else { + offset = + tlan_hash_func((u8 *)&ha->addr); + if (offset < 32) + hash1 |= (1 << offset); + else + hash2 |= (1 << (offset - 32)); + } + i++; + } + for ( ; i < 3; i++) + tlan_set_mac(dev, i + 1, NULL); + tlan_dio_write32(dev->base_addr, TLAN_HASH_1, hash1); + tlan_dio_write32(dev->base_addr, TLAN_HASH_2, hash2); + } + } + +} + + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver interrupt vectors and table + +please see chap. 4, "Interrupt Handling" of the "ThunderLAN +Programmer's Guide" for more informations on handling interrupts +generated by TLAN based adapters. + +****************************************************************************** +*****************************************************************************/ + + + + +/*************************************************************** + * tlan_handle_tx_eof + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles Tx EOF interrupts which are raised + * by the adapter when it has completed sending the + * contents of a buffer. If detemines which list/buffer + * was completed and resets it. If the buffer was the last + * in the channel (EOC), then the function checks to see if + * another buffer is ready to send, and if so, sends a Tx + * Go command. Finally, the driver activates/continues the + * activity LED. + * + **************************************************************/ + +static u32 tlan_handle_tx_eof(struct net_device *dev, u16 host_int) +{ + struct tlan_priv *priv = netdev_priv(dev); + int eoc = 0; + struct tlan_list *head_list; + dma_addr_t head_list_phys; + u32 ack = 0; + u16 tmp_c_stat; + + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: Handling TX EOF (Head=%d Tail=%d)\n", + priv->tx_head, priv->tx_tail); + head_list = priv->tx_list + priv->tx_head; + + while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP) + && (ack < 255)) { + struct sk_buff *skb = tlan_get_skb(head_list); + + ack++; + pci_unmap_single(priv->pci_dev, head_list->buffer[0].address, + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + head_list->buffer[8].address = 0; + head_list->buffer[9].address = 0; + + if (tmp_c_stat & TLAN_CSTAT_EOC) + eoc = 1; + + dev->stats.tx_bytes += head_list->frame_size; + + head_list->c_stat = TLAN_CSTAT_UNUSED; + netif_start_queue(dev); + CIRC_INC(priv->tx_head, TLAN_NUM_TX_LISTS); + head_list = priv->tx_list + priv->tx_head; + } + + if (!ack) + netdev_info(dev, + "Received interrupt for uncompleted TX frame\n"); + + if (eoc) { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: handling TX EOC (Head=%d Tail=%d)\n", + priv->tx_head, priv->tx_tail); + head_list = priv->tx_list + priv->tx_head; + head_list_phys = priv->tx_list_dma + + sizeof(struct tlan_list)*priv->tx_head; + if ((head_list->c_stat & TLAN_CSTAT_READY) + == TLAN_CSTAT_READY) { + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); + ack |= TLAN_HC_GO; + } else { + priv->tx_in_progress = 0; + } + } + + if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) { + tlan_dio_write8(dev->base_addr, + TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT); + if (priv->timer.function == NULL) { + priv->timer.function = tlan_timer; + priv->timer.data = (unsigned long) dev; + priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; + priv->timer_set_at = jiffies; + priv->timer_type = TLAN_TIMER_ACTIVITY; + add_timer(&priv->timer); + } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) { + priv->timer_set_at = jiffies; + } + } + + return ack; + +} + + + + +/*************************************************************** + * TLan_HandleStatOverflow + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles the Statistics Overflow interrupt + * which means that one or more of the TLAN statistics + * registers has reached 1/2 capacity and needs to be read. + * + **************************************************************/ + +static u32 tlan_handle_stat_overflow(struct net_device *dev, u16 host_int) +{ + tlan_read_and_clear_stats(dev, TLAN_RECORD); + + return 1; + +} + + + + +/*************************************************************** + * TLan_HandleRxEOF + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles the Rx EOF interrupt which + * indicates a frame has been received by the adapter from + * the net and the frame has been transferred to memory. + * The function determines the bounce buffer the frame has + * been loaded into, creates a new sk_buff big enough to + * hold the frame, and sends it to protocol stack. It + * then resets the used buffer and appends it to the end + * of the list. If the frame was the last in the Rx + * channel (EOC), the function restarts the receive channel + * by sending an Rx Go command to the adapter. Then it + * activates/continues the activity LED. + * + **************************************************************/ + +static u32 tlan_handle_rx_eof(struct net_device *dev, u16 host_int) +{ + struct tlan_priv *priv = netdev_priv(dev); + u32 ack = 0; + int eoc = 0; + struct tlan_list *head_list; + struct sk_buff *skb; + struct tlan_list *tail_list; + u16 tmp_c_stat; + dma_addr_t head_list_phys; + + TLAN_DBG(TLAN_DEBUG_RX, "RECEIVE: handling RX EOF (Head=%d Tail=%d)\n", + priv->rx_head, priv->rx_tail); + head_list = priv->rx_list + priv->rx_head; + head_list_phys = + priv->rx_list_dma + sizeof(struct tlan_list)*priv->rx_head; + + while (((tmp_c_stat = head_list->c_stat) & TLAN_CSTAT_FRM_CMP) + && (ack < 255)) { + dma_addr_t frame_dma = head_list->buffer[0].address; + u32 frame_size = head_list->frame_size; + struct sk_buff *new_skb; + + ack++; + if (tmp_c_stat & TLAN_CSTAT_EOC) + eoc = 1; + + new_skb = netdev_alloc_skb_ip_align(dev, + TLAN_MAX_FRAME_SIZE + 5); + if (!new_skb) + goto drop_and_reuse; + + skb = tlan_get_skb(head_list); + pci_unmap_single(priv->pci_dev, frame_dma, + TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); + skb_put(skb, frame_size); + + dev->stats.rx_bytes += frame_size; + + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + + head_list->buffer[0].address = + pci_map_single(priv->pci_dev, new_skb->data, + TLAN_MAX_FRAME_SIZE, PCI_DMA_FROMDEVICE); + + tlan_store_skb(head_list, new_skb); +drop_and_reuse: + head_list->forward = 0; + head_list->c_stat = 0; + tail_list = priv->rx_list + priv->rx_tail; + tail_list->forward = head_list_phys; + + CIRC_INC(priv->rx_head, TLAN_NUM_RX_LISTS); + CIRC_INC(priv->rx_tail, TLAN_NUM_RX_LISTS); + head_list = priv->rx_list + priv->rx_head; + head_list_phys = priv->rx_list_dma + + sizeof(struct tlan_list)*priv->rx_head; + } + + if (!ack) + netdev_info(dev, + "Received interrupt for uncompleted RX frame\n"); + + + if (eoc) { + TLAN_DBG(TLAN_DEBUG_RX, + "RECEIVE: handling RX EOC (Head=%d Tail=%d)\n", + priv->rx_head, priv->rx_tail); + head_list = priv->rx_list + priv->rx_head; + head_list_phys = priv->rx_list_dma + + sizeof(struct tlan_list)*priv->rx_head; + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); + ack |= TLAN_HC_GO | TLAN_HC_RT; + priv->rx_eoc_count++; + } + + if (priv->adapter->flags & TLAN_ADAPTER_ACTIVITY_LED) { + tlan_dio_write8(dev->base_addr, + TLAN_LED_REG, TLAN_LED_LINK | TLAN_LED_ACT); + if (priv->timer.function == NULL) { + priv->timer.function = tlan_timer; + priv->timer.data = (unsigned long) dev; + priv->timer.expires = jiffies + TLAN_TIMER_ACT_DELAY; + priv->timer_set_at = jiffies; + priv->timer_type = TLAN_TIMER_ACTIVITY; + add_timer(&priv->timer); + } else if (priv->timer_type == TLAN_TIMER_ACTIVITY) { + priv->timer_set_at = jiffies; + } + } + + return ack; + +} + + + + +/*************************************************************** + * tlan_handle_dummy + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles the Dummy interrupt, which is + * raised whenever a test interrupt is generated by setting + * the Req_Int bit of HOST_CMD to 1. + * + **************************************************************/ + +static u32 tlan_handle_dummy(struct net_device *dev, u16 host_int) +{ + netdev_info(dev, "Test interrupt\n"); + return 1; + +} + + + + +/*************************************************************** + * tlan_handle_tx_eoc + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This driver is structured to determine EOC occurrences by + * reading the CSTAT member of the list structure. Tx EOC + * interrupts are disabled via the DIO INTDIS register. + * However, TLAN chips before revision 3.0 didn't have this + * functionality, so process EOC events if this is the + * case. + * + **************************************************************/ + +static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int) +{ + struct tlan_priv *priv = netdev_priv(dev); + struct tlan_list *head_list; + dma_addr_t head_list_phys; + u32 ack = 1; + + host_int = 0; + if (priv->tlan_rev < 0x30) { + TLAN_DBG(TLAN_DEBUG_TX, + "TRANSMIT: handling TX EOC (Head=%d Tail=%d) -- IRQ\n", + priv->tx_head, priv->tx_tail); + head_list = priv->tx_list + priv->tx_head; + head_list_phys = priv->tx_list_dma + + sizeof(struct tlan_list)*priv->tx_head; + if ((head_list->c_stat & TLAN_CSTAT_READY) + == TLAN_CSTAT_READY) { + netif_stop_queue(dev); + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); + ack |= TLAN_HC_GO; + } else { + priv->tx_in_progress = 0; + } + } + + return ack; + +} + + + + +/*************************************************************** + * tlan_handle_status_check + * + * Returns: + * 0 if Adapter check, 1 if Network Status check. + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This function handles Adapter Check/Network Status + * interrupts generated by the adapter. It checks the + * vector in the HOST_INT register to determine if it is + * an Adapter Check interrupt. If so, it resets the + * adapter. Otherwise it clears the status registers + * and services the PHY. + * + **************************************************************/ + +static u32 tlan_handle_status_check(struct net_device *dev, u16 host_int) +{ + struct tlan_priv *priv = netdev_priv(dev); + u32 ack; + u32 error; + u8 net_sts; + u32 phy; + u16 tlphy_ctl; + u16 tlphy_sts; + + ack = 1; + if (host_int & TLAN_HI_IV_MASK) { + netif_stop_queue(dev); + error = inl(dev->base_addr + TLAN_CH_PARM); + netdev_info(dev, "Adaptor Error = 0x%x\n", error); + tlan_read_and_clear_stats(dev, TLAN_RECORD); + outl(TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD); + + schedule_work(&priv->tlan_tqueue); + + netif_wake_queue(dev); + ack = 0; + } else { + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Status Check\n", dev->name); + phy = priv->phy[priv->phy_num]; + + net_sts = tlan_dio_read8(dev->base_addr, TLAN_NET_STS); + if (net_sts) { + tlan_dio_write8(dev->base_addr, TLAN_NET_STS, net_sts); + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Net_Sts = %x\n", + dev->name, (unsigned) net_sts); + } + if ((net_sts & TLAN_NET_STS_MIRQ) && (priv->phy_num == 0)) { + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_STS, &tlphy_sts); + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl); + if (!(tlphy_sts & TLAN_TS_POLOK) && + !(tlphy_ctl & TLAN_TC_SWAPOL)) { + tlphy_ctl |= TLAN_TC_SWAPOL; + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, + tlphy_ctl); + } else if ((tlphy_sts & TLAN_TS_POLOK) && + (tlphy_ctl & TLAN_TC_SWAPOL)) { + tlphy_ctl &= ~TLAN_TC_SWAPOL; + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, + tlphy_ctl); + } + + if (debug) + tlan_phy_print(dev); + } + } + + return ack; + +} + + + + +/*************************************************************** + * tlan_handle_rx_eoc + * + * Returns: + * 1 + * Parms: + * dev Device assigned the IRQ that was + * raised. + * host_int The contents of the HOST_INT + * port. + * + * This driver is structured to determine EOC occurrences by + * reading the CSTAT member of the list structure. Rx EOC + * interrupts are disabled via the DIO INTDIS register. + * However, TLAN chips before revision 3.0 didn't have this + * CSTAT member or a INTDIS register, so if this chip is + * pre-3.0, process EOC interrupts normally. + * + **************************************************************/ + +static u32 tlan_handle_rx_eoc(struct net_device *dev, u16 host_int) +{ + struct tlan_priv *priv = netdev_priv(dev); + dma_addr_t head_list_phys; + u32 ack = 1; + + if (priv->tlan_rev < 0x30) { + TLAN_DBG(TLAN_DEBUG_RX, + "RECEIVE: Handling RX EOC (head=%d tail=%d) -- IRQ\n", + priv->rx_head, priv->rx_tail); + head_list_phys = priv->rx_list_dma + + sizeof(struct tlan_list)*priv->rx_head; + outl(head_list_phys, dev->base_addr + TLAN_CH_PARM); + ack |= TLAN_HC_GO | TLAN_HC_RT; + priv->rx_eoc_count++; + } + + return ack; + +} + + + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver timer function + +****************************************************************************** +*****************************************************************************/ + + +/*************************************************************** + * tlan_timer + * + * Returns: + * Nothing + * Parms: + * data A value given to add timer when + * add_timer was called. + * + * This function handles timed functionality for the + * TLAN driver. The two current timer uses are for + * delaying for autonegotionation and driving the ACT LED. + * - Autonegotiation requires being allowed about + * 2 1/2 seconds before attempting to transmit a + * packet. It would be a very bad thing to hang + * the kernel this long, so the driver doesn't + * allow transmission 'til after this time, for + * certain PHYs. It would be much nicer if all + * PHYs were interrupt-capable like the internal + * PHY. + * - The ACT LED, which shows adapter activity, is + * driven by the driver, and so must be left on + * for a short period to power up the LED so it + * can be seen. This delay can be changed by + * changing the TLAN_TIMER_ACT_DELAY in tlan.h, + * if desired. 100 ms produces a slightly + * sluggish response. + * + **************************************************************/ + +static void tlan_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct tlan_priv *priv = netdev_priv(dev); + u32 elapsed; + unsigned long flags = 0; + + priv->timer.function = NULL; + + switch (priv->timer_type) { + case TLAN_TIMER_PHY_PDOWN: + tlan_phy_power_down(dev); + break; + case TLAN_TIMER_PHY_PUP: + tlan_phy_power_up(dev); + break; + case TLAN_TIMER_PHY_RESET: + tlan_phy_reset(dev); + break; + case TLAN_TIMER_PHY_START_LINK: + tlan_phy_start_link(dev); + break; + case TLAN_TIMER_PHY_FINISH_AN: + tlan_phy_finish_auto_neg(dev); + break; + case TLAN_TIMER_FINISH_RESET: + tlan_finish_reset(dev); + break; + case TLAN_TIMER_ACTIVITY: + spin_lock_irqsave(&priv->lock, flags); + if (priv->timer.function == NULL) { + elapsed = jiffies - priv->timer_set_at; + if (elapsed >= TLAN_TIMER_ACT_DELAY) { + tlan_dio_write8(dev->base_addr, + TLAN_LED_REG, TLAN_LED_LINK); + } else { + priv->timer.function = tlan_timer; + priv->timer.expires = priv->timer_set_at + + TLAN_TIMER_ACT_DELAY; + spin_unlock_irqrestore(&priv->lock, flags); + add_timer(&priv->timer); + break; + } + } + spin_unlock_irqrestore(&priv->lock, flags); + break; + default: + break; + } + +} + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver adapter related routines + +****************************************************************************** +*****************************************************************************/ + + +/*************************************************************** + * tlan_reset_lists + * + * Returns: + * Nothing + * Parms: + * dev The device structure with the list + * stuctures to be reset. + * + * This routine sets the variables associated with managing + * the TLAN lists to their initial values. + * + **************************************************************/ + +static void tlan_reset_lists(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + int i; + struct tlan_list *list; + dma_addr_t list_phys; + struct sk_buff *skb; + + priv->tx_head = 0; + priv->tx_tail = 0; + for (i = 0; i < TLAN_NUM_TX_LISTS; i++) { + list = priv->tx_list + i; + list->c_stat = TLAN_CSTAT_UNUSED; + list->buffer[0].address = 0; + list->buffer[2].count = 0; + list->buffer[2].address = 0; + list->buffer[8].address = 0; + list->buffer[9].address = 0; + } + + priv->rx_head = 0; + priv->rx_tail = TLAN_NUM_RX_LISTS - 1; + for (i = 0; i < TLAN_NUM_RX_LISTS; i++) { + list = priv->rx_list + i; + list_phys = priv->rx_list_dma + sizeof(struct tlan_list)*i; + list->c_stat = TLAN_CSTAT_READY; + list->frame_size = TLAN_MAX_FRAME_SIZE; + list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER; + skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5); + if (!skb) + break; + + list->buffer[0].address = pci_map_single(priv->pci_dev, + skb->data, + TLAN_MAX_FRAME_SIZE, + PCI_DMA_FROMDEVICE); + tlan_store_skb(list, skb); + list->buffer[1].count = 0; + list->buffer[1].address = 0; + list->forward = list_phys + sizeof(struct tlan_list); + } + + /* in case ran out of memory early, clear bits */ + while (i < TLAN_NUM_RX_LISTS) { + tlan_store_skb(priv->rx_list + i, NULL); + ++i; + } + list->forward = 0; + +} + + +static void tlan_free_lists(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + int i; + struct tlan_list *list; + struct sk_buff *skb; + + for (i = 0; i < TLAN_NUM_TX_LISTS; i++) { + list = priv->tx_list + i; + skb = tlan_get_skb(list); + if (skb) { + pci_unmap_single( + priv->pci_dev, + list->buffer[0].address, + max(skb->len, + (unsigned int)TLAN_MIN_FRAME_SIZE), + PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + list->buffer[8].address = 0; + list->buffer[9].address = 0; + } + } + + for (i = 0; i < TLAN_NUM_RX_LISTS; i++) { + list = priv->rx_list + i; + skb = tlan_get_skb(list); + if (skb) { + pci_unmap_single(priv->pci_dev, + list->buffer[0].address, + TLAN_MAX_FRAME_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + list->buffer[8].address = 0; + list->buffer[9].address = 0; + } + } +} + + + + +/*************************************************************** + * tlan_print_dio + * + * Returns: + * Nothing + * Parms: + * io_base Base IO port of the device of + * which to print DIO registers. + * + * This function prints out all the internal (DIO) + * registers of a TLAN chip. + * + **************************************************************/ + +static void tlan_print_dio(u16 io_base) +{ + u32 data0, data1; + int i; + + pr_info("Contents of internal registers for io base 0x%04hx\n", + io_base); + pr_info("Off. +0 +4\n"); + for (i = 0; i < 0x4C; i += 8) { + data0 = tlan_dio_read32(io_base, i); + data1 = tlan_dio_read32(io_base, i + 0x4); + pr_info("0x%02x 0x%08x 0x%08x\n", i, data0, data1); + } + +} + + + + +/*************************************************************** + * TLan_PrintList + * + * Returns: + * Nothing + * Parms: + * list A pointer to the struct tlan_list structure to + * be printed. + * type A string to designate type of list, + * "Rx" or "Tx". + * num The index of the list. + * + * This function prints out the contents of the list + * pointed to by the list parameter. + * + **************************************************************/ + +static void tlan_print_list(struct tlan_list *list, char *type, int num) +{ + int i; + + pr_info("%s List %d at %p\n", type, num, list); + pr_info(" Forward = 0x%08x\n", list->forward); + pr_info(" CSTAT = 0x%04hx\n", list->c_stat); + pr_info(" Frame Size = 0x%04hx\n", list->frame_size); + /* for (i = 0; i < 10; i++) { */ + for (i = 0; i < 2; i++) { + pr_info(" Buffer[%d].count, addr = 0x%08x, 0x%08x\n", + i, list->buffer[i].count, list->buffer[i].address); + } + +} + + + + +/*************************************************************** + * tlan_read_and_clear_stats + * + * Returns: + * Nothing + * Parms: + * dev Pointer to device structure of adapter + * to which to read stats. + * record Flag indicating whether to add + * + * This functions reads all the internal status registers + * of the TLAN chip, which clears them as a side effect. + * It then either adds the values to the device's status + * struct, or discards them, depending on whether record + * is TLAN_RECORD (!=0) or TLAN_IGNORE (==0). + * + **************************************************************/ + +static void tlan_read_and_clear_stats(struct net_device *dev, int record) +{ + u32 tx_good, tx_under; + u32 rx_good, rx_over; + u32 def_tx, crc, code; + u32 multi_col, single_col; + u32 excess_col, late_col, loss; + + outw(TLAN_GOOD_TX_FRMS, dev->base_addr + TLAN_DIO_ADR); + tx_good = inb(dev->base_addr + TLAN_DIO_DATA); + tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + tx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16; + tx_under = inb(dev->base_addr + TLAN_DIO_DATA + 3); + + outw(TLAN_GOOD_RX_FRMS, dev->base_addr + TLAN_DIO_ADR); + rx_good = inb(dev->base_addr + TLAN_DIO_DATA); + rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + rx_good += inb(dev->base_addr + TLAN_DIO_DATA + 2) << 16; + rx_over = inb(dev->base_addr + TLAN_DIO_DATA + 3); + + outw(TLAN_DEFERRED_TX, dev->base_addr + TLAN_DIO_ADR); + def_tx = inb(dev->base_addr + TLAN_DIO_DATA); + def_tx += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + crc = inb(dev->base_addr + TLAN_DIO_DATA + 2); + code = inb(dev->base_addr + TLAN_DIO_DATA + 3); + + outw(TLAN_MULTICOL_FRMS, dev->base_addr + TLAN_DIO_ADR); + multi_col = inb(dev->base_addr + TLAN_DIO_DATA); + multi_col += inb(dev->base_addr + TLAN_DIO_DATA + 1) << 8; + single_col = inb(dev->base_addr + TLAN_DIO_DATA + 2); + single_col += inb(dev->base_addr + TLAN_DIO_DATA + 3) << 8; + + outw(TLAN_EXCESSCOL_FRMS, dev->base_addr + TLAN_DIO_ADR); + excess_col = inb(dev->base_addr + TLAN_DIO_DATA); + late_col = inb(dev->base_addr + TLAN_DIO_DATA + 1); + loss = inb(dev->base_addr + TLAN_DIO_DATA + 2); + + if (record) { + dev->stats.rx_packets += rx_good; + dev->stats.rx_errors += rx_over + crc + code; + dev->stats.tx_packets += tx_good; + dev->stats.tx_errors += tx_under + loss; + dev->stats.collisions += multi_col + + single_col + excess_col + late_col; + + dev->stats.rx_over_errors += rx_over; + dev->stats.rx_crc_errors += crc; + dev->stats.rx_frame_errors += code; + + dev->stats.tx_aborted_errors += tx_under; + dev->stats.tx_carrier_errors += loss; + } + +} + + + + +/*************************************************************** + * TLan_Reset + * + * Returns: + * 0 + * Parms: + * dev Pointer to device structure of adapter + * to be reset. + * + * This function resets the adapter and it's physical + * device. See Chap. 3, pp. 9-10 of the "ThunderLAN + * Programmer's Guide" for details. The routine tries to + * implement what is detailed there, though adjustments + * have been made. + * + **************************************************************/ + +static void +tlan_reset_adapter(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + int i; + u32 addr; + u32 data; + u8 data8; + + priv->tlan_full_duplex = false; + priv->phy_online = 0; + netif_carrier_off(dev); + +/* 1. Assert reset bit. */ + + data = inl(dev->base_addr + TLAN_HOST_CMD); + data |= TLAN_HC_AD_RST; + outl(data, dev->base_addr + TLAN_HOST_CMD); + + udelay(1000); + +/* 2. Turn off interrupts. (Probably isn't necessary) */ + + data = inl(dev->base_addr + TLAN_HOST_CMD); + data |= TLAN_HC_INT_OFF; + outl(data, dev->base_addr + TLAN_HOST_CMD); + +/* 3. Clear AREGs and HASHs. */ + + for (i = TLAN_AREG_0; i <= TLAN_HASH_2; i += 4) + tlan_dio_write32(dev->base_addr, (u16) i, 0); + +/* 4. Setup NetConfig register. */ + + data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN | TLAN_NET_CFG_PHY_EN; + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); + +/* 5. Load Ld_Tmr and Ld_Thr in HOST_CMD. */ + + outl(TLAN_HC_LD_TMR | 0x3f, dev->base_addr + TLAN_HOST_CMD); + outl(TLAN_HC_LD_THR | 0x9, dev->base_addr + TLAN_HOST_CMD); + +/* 6. Unreset the MII by setting NMRST (in NetSio) to 1. */ + + outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); + addr = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; + tlan_set_bit(TLAN_NET_SIO_NMRST, addr); + +/* 7. Setup the remaining registers. */ + + if (priv->tlan_rev >= 0x30) { + data8 = TLAN_ID_TX_EOC | TLAN_ID_RX_EOC; + tlan_dio_write8(dev->base_addr, TLAN_INT_DIS, data8); + } + tlan_phy_detect(dev); + data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN; + + if (priv->adapter->flags & TLAN_ADAPTER_BIT_RATE_PHY) { + data |= TLAN_NET_CFG_BIT; + if (priv->aui == 1) { + tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x0a); + } else if (priv->duplex == TLAN_DUPLEX_FULL) { + tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x00); + priv->tlan_full_duplex = true; + } else { + tlan_dio_write8(dev->base_addr, TLAN_ACOMMIT, 0x08); + } + } + + /* don't power down internal PHY if we're going to use it */ + if (priv->phy_num == 0 || + (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10)) + data |= TLAN_NET_CFG_PHY_EN; + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, (u16) data); + + if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) + tlan_finish_reset(dev); + else + tlan_phy_power_down(dev); + +} + + + + +static void +tlan_finish_reset(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u8 data; + u32 phy; + u8 sio; + u16 status; + u16 partner; + u16 tlphy_ctl; + u16 tlphy_par; + u16 tlphy_id1, tlphy_id2; + int i; + + phy = priv->phy[priv->phy_num]; + + data = TLAN_NET_CMD_NRESET | TLAN_NET_CMD_NWRAP; + if (priv->tlan_full_duplex) + data |= TLAN_NET_CMD_DUPLEX; + tlan_dio_write8(dev->base_addr, TLAN_NET_CMD, data); + data = TLAN_NET_MASK_MASK4 | TLAN_NET_MASK_MASK5; + if (priv->phy_num == 0) + data |= TLAN_NET_MASK_MASK7; + tlan_dio_write8(dev->base_addr, TLAN_NET_MASK, data); + tlan_dio_write16(dev->base_addr, TLAN_MAX_RX, ((1536)+7)&~7); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &tlphy_id1); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &tlphy_id2); + + if ((priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) || + (priv->aui)) { + status = MII_GS_LINK; + netdev_info(dev, "Link forced\n"); + } else { + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + udelay(1000); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + if (status & MII_GS_LINK) { + /* We only support link info on Nat.Sem. PHY's */ + if ((tlphy_id1 == NAT_SEM_ID1) && + (tlphy_id2 == NAT_SEM_ID2)) { + tlan_mii_read_reg(dev, phy, MII_AN_LPA, + &partner); + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_PAR, + &tlphy_par); + + netdev_info(dev, + "Link active, %s %uMbps %s-Duplex\n", + !(tlphy_par & TLAN_PHY_AN_EN_STAT) + ? "forced" : "Autonegotiation enabled,", + tlphy_par & TLAN_PHY_SPEED_100 + ? 100 : 10, + tlphy_par & TLAN_PHY_DUPLEX_FULL + ? "Full" : "Half"); + + if (tlphy_par & TLAN_PHY_AN_EN_STAT) { + netdev_info(dev, "Partner capability:"); + for (i = 5; i < 10; i++) + if (partner & (1 << i)) + pr_cont(" %s", + media[i-5]); + pr_cont("\n"); + } + } else + netdev_info(dev, "Link active\n"); + /* Enabling link beat monitoring */ + priv->media_timer.function = tlan_phy_monitor; + priv->media_timer.data = (unsigned long) dev; + priv->media_timer.expires = jiffies + HZ; + add_timer(&priv->media_timer); + } + } + + if (priv->phy_num == 0) { + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tlphy_ctl); + tlphy_ctl |= TLAN_TC_INTEN; + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tlphy_ctl); + sio = tlan_dio_read8(dev->base_addr, TLAN_NET_SIO); + sio |= TLAN_NET_SIO_MINTEN; + tlan_dio_write8(dev->base_addr, TLAN_NET_SIO, sio); + } + + if (status & MII_GS_LINK) { + tlan_set_mac(dev, 0, dev->dev_addr); + priv->phy_online = 1; + outb((TLAN_HC_INT_ON >> 8), dev->base_addr + TLAN_HOST_CMD + 1); + if (debug >= 1 && debug != TLAN_DEBUG_PROBE) + outb((TLAN_HC_REQ_INT >> 8), + dev->base_addr + TLAN_HOST_CMD + 1); + outl(priv->rx_list_dma, dev->base_addr + TLAN_CH_PARM); + outl(TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD); + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK); + netif_carrier_on(dev); + } else { + netdev_info(dev, "Link inactive, will retry in 10 secs...\n"); + tlan_set_timer(dev, (10*HZ), TLAN_TIMER_FINISH_RESET); + return; + } + tlan_set_multicast_list(dev); + +} + + + + +/*************************************************************** + * tlan_set_mac + * + * Returns: + * Nothing + * Parms: + * dev Pointer to device structure of adapter + * on which to change the AREG. + * areg The AREG to set the address in (0 - 3). + * mac A pointer to an array of chars. Each + * element stores one byte of the address. + * IE, it isn't in ascii. + * + * This function transfers a MAC address to one of the + * TLAN AREGs (address registers). The TLAN chip locks + * the register on writing to offset 0 and unlocks the + * register after writing to offset 5. If NULL is passed + * in mac, then the AREG is filled with 0's. + * + **************************************************************/ + +static void tlan_set_mac(struct net_device *dev, int areg, char *mac) +{ + int i; + + areg *= 6; + + if (mac != NULL) { + for (i = 0; i < 6; i++) + tlan_dio_write8(dev->base_addr, + TLAN_AREG_0 + areg + i, mac[i]); + } else { + for (i = 0; i < 6; i++) + tlan_dio_write8(dev->base_addr, + TLAN_AREG_0 + areg + i, 0); + } + +} + + + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver PHY layer routines + +****************************************************************************** +*****************************************************************************/ + + + +/********************************************************************* + * tlan_phy_print + * + * Returns: + * Nothing + * Parms: + * dev A pointer to the device structure of the + * TLAN device having the PHYs to be detailed. + * + * This function prints the registers a PHY (aka transceiver). + * + ********************************************************************/ + +static void tlan_phy_print(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 i, data0, data1, data2, data3, phy; + + phy = priv->phy[priv->phy_num]; + + if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) { + netdev_info(dev, "Unmanaged PHY\n"); + } else if (phy <= TLAN_PHY_MAX_ADDR) { + netdev_info(dev, "PHY 0x%02x\n", phy); + pr_info(" Off. +0 +1 +2 +3\n"); + for (i = 0; i < 0x20; i += 4) { + tlan_mii_read_reg(dev, phy, i, &data0); + tlan_mii_read_reg(dev, phy, i + 1, &data1); + tlan_mii_read_reg(dev, phy, i + 2, &data2); + tlan_mii_read_reg(dev, phy, i + 3, &data3); + pr_info(" 0x%02x 0x%04hx 0x%04hx 0x%04hx 0x%04hx\n", + i, data0, data1, data2, data3); + } + } else { + netdev_info(dev, "Invalid PHY\n"); + } + +} + + + + +/********************************************************************* + * tlan_phy_detect + * + * Returns: + * Nothing + * Parms: + * dev A pointer to the device structure of the adapter + * for which the PHY needs determined. + * + * So far I've found that adapters which have external PHYs + * may also use the internal PHY for part of the functionality. + * (eg, AUI/Thinnet). This function finds out if this TLAN + * chip has an internal PHY, and then finds the first external + * PHY (starting from address 0) if it exists). + * + ********************************************************************/ + +static void tlan_phy_detect(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 control; + u16 hi; + u16 lo; + u32 phy; + + if (priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY) { + priv->phy_num = 0xffff; + return; + } + + tlan_mii_read_reg(dev, TLAN_PHY_MAX_ADDR, MII_GEN_ID_HI, &hi); + + if (hi != 0xffff) + priv->phy[0] = TLAN_PHY_MAX_ADDR; + else + priv->phy[0] = TLAN_PHY_NONE; + + priv->phy[1] = TLAN_PHY_NONE; + for (phy = 0; phy <= TLAN_PHY_MAX_ADDR; phy++) { + tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &control); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_HI, &hi); + tlan_mii_read_reg(dev, phy, MII_GEN_ID_LO, &lo); + if ((control != 0xffff) || + (hi != 0xffff) || (lo != 0xffff)) { + TLAN_DBG(TLAN_DEBUG_GNRL, + "PHY found at %02x %04x %04x %04x\n", + phy, control, hi, lo); + if ((priv->phy[1] == TLAN_PHY_NONE) && + (phy != TLAN_PHY_MAX_ADDR)) { + priv->phy[1] = phy; + } + } + } + + if (priv->phy[1] != TLAN_PHY_NONE) + priv->phy_num = 1; + else if (priv->phy[0] != TLAN_PHY_NONE) + priv->phy_num = 0; + else + netdev_info(dev, "Cannot initialize device, no PHY was found!\n"); + +} + + + + +static void tlan_phy_power_down(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 value; + + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering down PHY(s).\n", dev->name); + value = MII_GC_PDOWN | MII_GC_LOOPBK | MII_GC_ISOLATE; + tlan_mii_sync(dev->base_addr); + tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value); + if ((priv->phy_num == 0) && (priv->phy[1] != TLAN_PHY_NONE)) { + /* if using internal PHY, the external PHY must be powered on */ + if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) + value = MII_GC_ISOLATE; /* just isolate it from MII */ + tlan_mii_sync(dev->base_addr); + tlan_mii_write_reg(dev, priv->phy[1], MII_GEN_CTL, value); + } + + /* Wait for 50 ms and powerup + * This is abitrary. It is intended to make sure the + * transceiver settles. + */ + tlan_set_timer(dev, msecs_to_jiffies(50), TLAN_TIMER_PHY_PUP); + +} + + + + +static void tlan_phy_power_up(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 value; + + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Powering up PHY.\n", dev->name); + tlan_mii_sync(dev->base_addr); + value = MII_GC_LOOPBK; + tlan_mii_write_reg(dev, priv->phy[priv->phy_num], MII_GEN_CTL, value); + tlan_mii_sync(dev->base_addr); + /* Wait for 500 ms and reset the + * transceiver. The TLAN docs say both 50 ms and + * 500 ms, so do the longer, just in case. + */ + tlan_set_timer(dev, msecs_to_jiffies(500), TLAN_TIMER_PHY_RESET); + +} + + + + +static void tlan_phy_reset(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 phy; + u16 value; + unsigned long timeout = jiffies + HZ; + + phy = priv->phy[priv->phy_num]; + + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Resetting PHY.\n", dev->name); + tlan_mii_sync(dev->base_addr); + value = MII_GC_LOOPBK | MII_GC_RESET; + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, value); + do { + tlan_mii_read_reg(dev, phy, MII_GEN_CTL, &value); + if (time_after(jiffies, timeout)) { + netdev_err(dev, "PHY reset timeout\n"); + return; + } + } while (value & MII_GC_RESET); + + /* Wait for 500 ms and initialize. + * I don't remember why I wait this long. + * I've changed this to 50ms, as it seems long enough. + */ + tlan_set_timer(dev, msecs_to_jiffies(50), TLAN_TIMER_PHY_START_LINK); + +} + + + + +static void tlan_phy_start_link(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 ability; + u16 control; + u16 data; + u16 phy; + u16 status; + u16 tctl; + + phy = priv->phy[priv->phy_num]; + TLAN_DBG(TLAN_DEBUG_GNRL, "%s: Trying to activate link.\n", dev->name); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &ability); + + if ((status & MII_GS_AUTONEG) && + (!priv->aui)) { + ability = status >> 11; + if (priv->speed == TLAN_SPEED_10 && + priv->duplex == TLAN_DUPLEX_HALF) { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0000); + } else if (priv->speed == TLAN_SPEED_10 && + priv->duplex == TLAN_DUPLEX_FULL) { + priv->tlan_full_duplex = true; + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x0100); + } else if (priv->speed == TLAN_SPEED_100 && + priv->duplex == TLAN_DUPLEX_HALF) { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2000); + } else if (priv->speed == TLAN_SPEED_100 && + priv->duplex == TLAN_DUPLEX_FULL) { + priv->tlan_full_duplex = true; + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x2100); + } else { + + /* Set Auto-Neg advertisement */ + tlan_mii_write_reg(dev, phy, MII_AN_ADV, + (ability << 5) | 1); + /* Enablee Auto-Neg */ + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1000); + /* Restart Auto-Neg */ + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, 0x1200); + /* Wait for 4 sec for autonegotiation + * to complete. The max spec time is less than this + * but the card need additional time to start AN. + * .5 sec should be plenty extra. + */ + netdev_info(dev, "Starting autonegotiation\n"); + tlan_set_timer(dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN); + return; + } + + } + + if ((priv->aui) && (priv->phy_num != 0)) { + priv->phy_num = 0; + data = TLAN_NET_CFG_1FRAG | TLAN_NET_CFG_1CHAN + | TLAN_NET_CFG_PHY_EN; + tlan_dio_write16(dev->base_addr, TLAN_NET_CONFIG, data); + tlan_set_timer(dev, msecs_to_jiffies(40), TLAN_TIMER_PHY_PDOWN); + return; + } else if (priv->phy_num == 0) { + control = 0; + tlan_mii_read_reg(dev, phy, TLAN_TLPHY_CTL, &tctl); + if (priv->aui) { + tctl |= TLAN_TC_AUISEL; + } else { + tctl &= ~TLAN_TC_AUISEL; + if (priv->duplex == TLAN_DUPLEX_FULL) { + control |= MII_GC_DUPLEX; + priv->tlan_full_duplex = true; + } + if (priv->speed == TLAN_SPEED_100) + control |= MII_GC_SPEEDSEL; + } + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, control); + tlan_mii_write_reg(dev, phy, TLAN_TLPHY_CTL, tctl); + } + + /* Wait for 2 sec to give the transceiver time + * to establish link. + */ + tlan_set_timer(dev, (4*HZ), TLAN_TIMER_FINISH_RESET); + +} + + + + +static void tlan_phy_finish_auto_neg(struct net_device *dev) +{ + struct tlan_priv *priv = netdev_priv(dev); + u16 an_adv; + u16 an_lpa; + u16 mode; + u16 phy; + u16 status; + + phy = priv->phy[priv->phy_num]; + + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + udelay(1000); + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &status); + + if (!(status & MII_GS_AUTOCMPLT)) { + /* Wait for 8 sec to give the process + * more time. Perhaps we should fail after a while. + */ + tlan_set_timer(dev, 2 * HZ, TLAN_TIMER_PHY_FINISH_AN); + return; + } + + netdev_info(dev, "Autonegotiation complete\n"); + tlan_mii_read_reg(dev, phy, MII_AN_ADV, &an_adv); + tlan_mii_read_reg(dev, phy, MII_AN_LPA, &an_lpa); + mode = an_adv & an_lpa & 0x03E0; + if (mode & 0x0100) + priv->tlan_full_duplex = true; + else if (!(mode & 0x0080) && (mode & 0x0040)) + priv->tlan_full_duplex = true; + + /* switch to internal PHY for 10 Mbps */ + if ((!(mode & 0x0180)) && + (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) && + (priv->phy_num != 0)) { + priv->phy_num = 0; + tlan_set_timer(dev, msecs_to_jiffies(400), TLAN_TIMER_PHY_PDOWN); + return; + } + + if (priv->phy_num == 0) { + if ((priv->duplex == TLAN_DUPLEX_FULL) || + (an_adv & an_lpa & 0x0040)) { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, + MII_GC_AUTOENB | MII_GC_DUPLEX); + netdev_info(dev, "Starting internal PHY with FULL-DUPLEX\n"); + } else { + tlan_mii_write_reg(dev, phy, MII_GEN_CTL, + MII_GC_AUTOENB); + netdev_info(dev, "Starting internal PHY with HALF-DUPLEX\n"); + } + } + + /* Wait for 100 ms. No reason in partiticular. + */ + tlan_set_timer(dev, msecs_to_jiffies(100), TLAN_TIMER_FINISH_RESET); + +} + + +/********************************************************************* + * + * tlan_phy_monitor + * + * Returns: + * None + * + * Params: + * data The device structure of this device. + * + * + * This function monitors PHY condition by reading the status + * register via the MII bus, controls LINK LED and notifies the + * kernel about link state. + * + *******************************************************************/ + +static void tlan_phy_monitor(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + struct tlan_priv *priv = netdev_priv(dev); + u16 phy; + u16 phy_status; + + phy = priv->phy[priv->phy_num]; + + /* Get PHY status register */ + tlan_mii_read_reg(dev, phy, MII_GEN_STS, &phy_status); + + /* Check if link has been lost */ + if (!(phy_status & MII_GS_LINK)) { + if (netif_carrier_ok(dev)) { + printk(KERN_DEBUG "TLAN: %s has lost link\n", + dev->name); + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, 0); + netif_carrier_off(dev); + if (priv->adapter->flags & TLAN_ADAPTER_USE_INTERN_10) { + /* power down internal PHY */ + u16 data = MII_GC_PDOWN | MII_GC_LOOPBK | + MII_GC_ISOLATE; + + tlan_mii_sync(dev->base_addr); + tlan_mii_write_reg(dev, priv->phy[0], + MII_GEN_CTL, data); + /* set to external PHY */ + priv->phy_num = 1; + /* restart autonegotiation */ + tlan_set_timer(dev, msecs_to_jiffies(400), + TLAN_TIMER_PHY_PDOWN); + return; + } + } + } + + /* Link restablished? */ + if ((phy_status & MII_GS_LINK) && !netif_carrier_ok(dev)) { + tlan_dio_write8(dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK); + printk(KERN_DEBUG "TLAN: %s has reestablished link\n", + dev->name); + netif_carrier_on(dev); + } + priv->media_timer.expires = jiffies + HZ; + add_timer(&priv->media_timer); +} + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver MII routines + +these routines are based on the information in chap. 2 of the +"ThunderLAN Programmer's Guide", pp. 15-24. + +****************************************************************************** +*****************************************************************************/ + + +/*************************************************************** + * tlan_mii_read_reg + * + * Returns: + * false if ack received ok + * true if no ack received or other error + * + * Parms: + * dev The device structure containing + * The io address and interrupt count + * for this device. + * phy The address of the PHY to be queried. + * reg The register whose contents are to be + * retrieved. + * val A pointer to a variable to store the + * retrieved value. + * + * This function uses the TLAN's MII bus to retrieve the contents + * of a given register on a PHY. It sends the appropriate info + * and then reads the 16-bit register value from the MII bus via + * the TLAN SIO register. + * + **************************************************************/ + +static bool +tlan_mii_read_reg(struct net_device *dev, u16 phy, u16 reg, u16 *val) +{ + u8 nack; + u16 sio, tmp; + u32 i; + bool err; + int minten; + struct tlan_priv *priv = netdev_priv(dev); + unsigned long flags = 0; + + err = false; + outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); + sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; + + if (!in_irq()) + spin_lock_irqsave(&priv->lock, flags); + + tlan_mii_sync(dev->base_addr); + + minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio); + if (minten) + tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio); + + tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */ + tlan_mii_send_data(dev->base_addr, 0x2, 2); /* read (10b) */ + tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */ + tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */ + + + tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); /* change direction */ + + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* clock idle bit */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* wait 300ns */ + + nack = tlan_get_bit(TLAN_NET_SIO_MDATA, sio); /* check for ACK */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); /* finish ACK */ + if (nack) { /* no ACK, so fake it */ + for (i = 0; i < 16; i++) { + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + } + tmp = 0xffff; + err = true; + } else { /* ACK, so read data */ + for (tmp = 0, i = 0x8000; i; i >>= 1) { + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + if (tlan_get_bit(TLAN_NET_SIO_MDATA, sio)) + tmp |= i; + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + } + } + + + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + + if (minten) + tlan_set_bit(TLAN_NET_SIO_MINTEN, sio); + + *val = tmp; + + if (!in_irq()) + spin_unlock_irqrestore(&priv->lock, flags); + + return err; + +} + + + + +/*************************************************************** + * tlan_mii_send_data + * + * Returns: + * Nothing + * Parms: + * base_port The base IO port of the adapter in + * question. + * dev The address of the PHY to be queried. + * data The value to be placed on the MII bus. + * num_bits The number of bits in data that are to + * be placed on the MII bus. + * + * This function sends on sequence of bits on the MII + * configuration bus. + * + **************************************************************/ + +static void tlan_mii_send_data(u16 base_port, u32 data, unsigned num_bits) +{ + u16 sio; + u32 i; + + if (num_bits == 0) + return; + + outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR); + sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO; + tlan_set_bit(TLAN_NET_SIO_MTXEN, sio); + + for (i = (0x1 << (num_bits - 1)); i; i >>= 1) { + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio); + if (data & i) + tlan_set_bit(TLAN_NET_SIO_MDATA, sio); + else + tlan_clear_bit(TLAN_NET_SIO_MDATA, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + (void) tlan_get_bit(TLAN_NET_SIO_MCLK, sio); + } + +} + + + + +/*************************************************************** + * TLan_MiiSync + * + * Returns: + * Nothing + * Parms: + * base_port The base IO port of the adapter in + * question. + * + * This functions syncs all PHYs in terms of the MII configuration + * bus. + * + **************************************************************/ + +static void tlan_mii_sync(u16 base_port) +{ + int i; + u16 sio; + + outw(TLAN_NET_SIO, base_port + TLAN_DIO_ADR); + sio = base_port + TLAN_DIO_DATA + TLAN_NET_SIO; + + tlan_clear_bit(TLAN_NET_SIO_MTXEN, sio); + for (i = 0; i < 32; i++) { + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + } + +} + + + + +/*************************************************************** + * tlan_mii_write_reg + * + * Returns: + * Nothing + * Parms: + * dev The device structure for the device + * to write to. + * phy The address of the PHY to be written to. + * reg The register whose contents are to be + * written. + * val The value to be written to the register. + * + * This function uses the TLAN's MII bus to write the contents of a + * given register on a PHY. It sends the appropriate info and then + * writes the 16-bit register value from the MII configuration bus + * via the TLAN SIO register. + * + **************************************************************/ + +static void +tlan_mii_write_reg(struct net_device *dev, u16 phy, u16 reg, u16 val) +{ + u16 sio; + int minten; + unsigned long flags = 0; + struct tlan_priv *priv = netdev_priv(dev); + + outw(TLAN_NET_SIO, dev->base_addr + TLAN_DIO_ADR); + sio = dev->base_addr + TLAN_DIO_DATA + TLAN_NET_SIO; + + if (!in_irq()) + spin_lock_irqsave(&priv->lock, flags); + + tlan_mii_sync(dev->base_addr); + + minten = tlan_get_bit(TLAN_NET_SIO_MINTEN, sio); + if (minten) + tlan_clear_bit(TLAN_NET_SIO_MINTEN, sio); + + tlan_mii_send_data(dev->base_addr, 0x1, 2); /* start (01b) */ + tlan_mii_send_data(dev->base_addr, 0x1, 2); /* write (01b) */ + tlan_mii_send_data(dev->base_addr, phy, 5); /* device # */ + tlan_mii_send_data(dev->base_addr, reg, 5); /* register # */ + + tlan_mii_send_data(dev->base_addr, 0x2, 2); /* send ACK */ + tlan_mii_send_data(dev->base_addr, val, 16); /* send data */ + + tlan_clear_bit(TLAN_NET_SIO_MCLK, sio); /* idle cycle */ + tlan_set_bit(TLAN_NET_SIO_MCLK, sio); + + if (minten) + tlan_set_bit(TLAN_NET_SIO_MINTEN, sio); + + if (!in_irq()) + spin_unlock_irqrestore(&priv->lock, flags); + +} + + + + +/***************************************************************************** +****************************************************************************** + +ThunderLAN driver eeprom routines + +the Compaq netelligent 10 and 10/100 cards use a microchip 24C02A +EEPROM. these functions are based on information in microchip's +data sheet. I don't know how well this functions will work with +other Eeproms. + +****************************************************************************** +*****************************************************************************/ + + +/*************************************************************** + * tlan_ee_send_start + * + * Returns: + * Nothing + * Parms: + * io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * + * This function sends a start cycle to an EEPROM attached + * to a TLAN chip. + * + **************************************************************/ + +static void tlan_ee_send_start(u16 io_base) +{ + u16 sio; + + outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); + sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; + + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + +} + + + + +/*************************************************************** + * tlan_ee_send_byte + * + * Returns: + * If the correct ack was received, 0, otherwise 1 + * Parms: io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * data The 8 bits of information to + * send to the EEPROM. + * stop If TLAN_EEPROM_STOP is passed, a + * stop cycle is sent after the + * byte is sent after the ack is + * read. + * + * This function sends a byte on the serial EEPROM line, + * driving the clock to send each bit. The function then + * reverses transmission direction and reads an acknowledge + * bit. + * + **************************************************************/ + +static int tlan_ee_send_byte(u16 io_base, u8 data, int stop) +{ + int err; + u8 place; + u16 sio; + + outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); + sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; + + /* Assume clock is low, tx is enabled; */ + for (place = 0x80; place != 0; place >>= 1) { + if (place & data) + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); + else + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + } + tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + err = tlan_get_bit(TLAN_NET_SIO_EDATA, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); + + if ((!err) && stop) { + /* STOP, raise data while clock is high */ + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); + } + + return err; + +} + + + + +/*************************************************************** + * tlan_ee_receive_byte + * + * Returns: + * Nothing + * Parms: + * io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * data An address to a char to hold the + * data sent from the EEPROM. + * stop If TLAN_EEPROM_STOP is passed, a + * stop cycle is sent after the + * byte is received, and no ack is + * sent. + * + * This function receives 8 bits of data from the EEPROM + * over the serial link. It then sends and ack bit, or no + * ack and a stop bit. This function is used to retrieve + * data after the address of a byte in the EEPROM has been + * sent. + * + **************************************************************/ + +static void tlan_ee_receive_byte(u16 io_base, u8 *data, int stop) +{ + u8 place; + u16 sio; + + outw(TLAN_NET_SIO, io_base + TLAN_DIO_ADR); + sio = io_base + TLAN_DIO_DATA + TLAN_NET_SIO; + *data = 0; + + /* Assume clock is low, tx is enabled; */ + tlan_clear_bit(TLAN_NET_SIO_ETXEN, sio); + for (place = 0x80; place; place >>= 1) { + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + if (tlan_get_bit(TLAN_NET_SIO_EDATA, sio)) + *data |= place; + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + } + + tlan_set_bit(TLAN_NET_SIO_ETXEN, sio); + if (!stop) { + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); /* ack = 0 */ + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + } else { + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); /* no ack = 1 (?) */ + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_clear_bit(TLAN_NET_SIO_ECLOK, sio); + /* STOP, raise data while clock is high */ + tlan_clear_bit(TLAN_NET_SIO_EDATA, sio); + tlan_set_bit(TLAN_NET_SIO_ECLOK, sio); + tlan_set_bit(TLAN_NET_SIO_EDATA, sio); + } + +} + + + + +/*************************************************************** + * tlan_ee_read_byte + * + * Returns: + * No error = 0, else, the stage at which the error + * occurred. + * Parms: + * io_base The IO port base address for the + * TLAN device with the EEPROM to + * use. + * ee_addr The address of the byte in the + * EEPROM whose contents are to be + * retrieved. + * data An address to a char to hold the + * data obtained from the EEPROM. + * + * This function reads a byte of information from an byte + * cell in the EEPROM. + * + **************************************************************/ + +static int tlan_ee_read_byte(struct net_device *dev, u8 ee_addr, u8 *data) +{ + int err; + struct tlan_priv *priv = netdev_priv(dev); + unsigned long flags = 0; + int ret = 0; + + spin_lock_irqsave(&priv->lock, flags); + + tlan_ee_send_start(dev->base_addr); + err = tlan_ee_send_byte(dev->base_addr, 0xa0, TLAN_EEPROM_ACK); + if (err) { + ret = 1; + goto fail; + } + err = tlan_ee_send_byte(dev->base_addr, ee_addr, TLAN_EEPROM_ACK); + if (err) { + ret = 2; + goto fail; + } + tlan_ee_send_start(dev->base_addr); + err = tlan_ee_send_byte(dev->base_addr, 0xa1, TLAN_EEPROM_ACK); + if (err) { + ret = 3; + goto fail; + } + tlan_ee_receive_byte(dev->base_addr, data, TLAN_EEPROM_STOP); +fail: + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; + +} + + + -- cgit v1.2.3-54-g00ecf