From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/net/fddi/skfp/drvfbi.c | 584 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 584 insertions(+) create mode 100644 drivers/net/fddi/skfp/drvfbi.c (limited to 'drivers/net/fddi/skfp/drvfbi.c') diff --git a/drivers/net/fddi/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c new file mode 100644 index 000000000..07da97c30 --- /dev/null +++ b/drivers/net/fddi/skfp/drvfbi.c @@ -0,0 +1,584 @@ +/****************************************************************************** + * + * (C)Copyright 1998,1999 SysKonnect, + * a business unit of Schneider & Koch & Co. Datensysteme GmbH. + * + * See the file "skfddi.c" for further information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * FBI board dependent Driver for SMT and LLC + */ + +#include "h/types.h" +#include "h/fddi.h" +#include "h/smc.h" +#include "h/supern_2.h" +#include "h/skfbiinc.h" +#include + +#ifndef lint +static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ; +#endif + +/* + * PCM active state + */ +#define PC8_ACTIVE 8 + +#define LED_Y_ON 0x11 /* Used for ring up/down indication */ +#define LED_Y_OFF 0x10 + + +#define MS2BCLK(x) ((x)*12500L) + +/* + * valid configuration values are: + */ + +/* + * xPOS_ID:xxxx + * | \ / + * | \/ + * | --------------------- the patched POS_ID of the Adapter + * | xxxx = (Vendor ID low byte, + * | Vendor ID high byte, + * | Device ID low byte, + * | Device ID high byte) + * +------------------------------ the patched oem_id must be + * 'S' for SK or 'I' for IBM + * this is a short id for the driver. + */ +#ifndef MULT_OEM +#ifndef OEM_CONCEPT +const u_char oem_id[] = "xPOS_ID:xxxx" ; +#else /* OEM_CONCEPT */ +const u_char oem_id[] = OEM_ID ; +#endif /* OEM_CONCEPT */ +#define ID_BYTE0 8 +#define OEMID(smc,i) oem_id[ID_BYTE0 + i] +#else /* MULT_OEM */ +const struct s_oem_ids oem_ids[] = { +#include "oemids.h" +{0} +}; +#define OEMID(smc,i) smc->hw.oem_id->oi_id[i] +#endif /* MULT_OEM */ + +/* Prototypes of external functions */ +#ifdef AIX +extern int AIX_vpdReadByte() ; +#endif + + +/* Prototype of a local function. */ +static void smt_stop_watchdog(struct s_smc *smc); + +/* + * FDDI card reset + */ +static void card_start(struct s_smc *smc) +{ + int i ; +#ifdef PCI + u_char rev_id ; + u_short word; +#endif + + smt_stop_watchdog(smc) ; + +#ifdef PCI + /* + * make sure no transfer activity is pending + */ + outpw(FM_A(FM_MDREG1),FM_MINIT) ; + outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; + hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; + /* + * now reset everything + */ + outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ + i = (int) inp(ADDR(B0_CTRL)) ; /* do dummy read */ + SK_UNUSED(i) ; /* Make LINT happy. */ + outp(ADDR(B0_CTRL), CTRL_RST_CLR) ; + + /* + * Reset all bits in the PCI STATUS register + */ + outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ; /* enable for writes */ + word = inpw(PCI_C(PCI_STATUS)) ; + outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ; + outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ; /* disable writes */ + + /* + * Release the reset of all the State machines + * Release Master_Reset + * Release HPI_SM_Reset + */ + outp(ADDR(B0_CTRL), CTRL_MRST_CLR|CTRL_HPI_CLR) ; + + /* + * determine the adapter type + * Note: Do it here, because some drivers may call card_start() once + * at very first before any other initialization functions is + * executed. + */ + rev_id = inp(PCI_C(PCI_REV_ID)) ; + if ((rev_id & 0xf0) == SK_ML_ID_1 || (rev_id & 0xf0) == SK_ML_ID_2) { + smc->hw.hw_is_64bit = TRUE ; + } else { + smc->hw.hw_is_64bit = FALSE ; + } + + /* + * Watermark initialization + */ + if (!smc->hw.hw_is_64bit) { + outpd(ADDR(B4_R1_F), RX_WATERMARK) ; + outpd(ADDR(B5_XA_F), TX_WATERMARK) ; + outpd(ADDR(B5_XS_F), TX_WATERMARK) ; + } + + outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* clear the reset chips */ + outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_ON|LED_GB_OFF) ; /* ye LED on */ + + /* init the timer value for the watch dog 2,5 minutes */ + outpd(ADDR(B2_WDOG_INI),0x6FC23AC0) ; + + /* initialize the ISR mask */ + smc->hw.is_imask = ISR_MASK ; + smc->hw.hw_state = STOPPED ; +#endif + GET_PAGE(0) ; /* necessary for BOOT */ +} + +void card_stop(struct s_smc *smc) +{ + smt_stop_watchdog(smc) ; + smc->hw.mac_ring_is_up = 0 ; /* ring down */ + +#ifdef PCI + /* + * make sure no transfer activity is pending + */ + outpw(FM_A(FM_MDREG1),FM_MINIT) ; + outp(ADDR(B0_CTRL), CTRL_HPI_SET) ; + hwt_wait_time(smc,hwt_quick_read(smc),MS2BCLK(10)) ; + /* + * now reset everything + */ + outp(ADDR(B0_CTRL),CTRL_RST_SET) ; /* reset for all chips */ + outp(ADDR(B0_CTRL),CTRL_RST_CLR) ; /* reset for all chips */ + outp(ADDR(B0_LED),LED_GA_OFF|LED_MY_OFF|LED_GB_OFF) ; /* all LEDs off */ + smc->hw.hw_state = STOPPED ; +#endif +} +/*--------------------------- ISR handling ----------------------------------*/ + +void mac1_irq(struct s_smc *smc, u_short stu, u_short stl) +{ + int restart_tx = 0 ; +again: + + /* + * parity error: note encoding error is not possible in tag mode + */ + if (stl & (FM_SPCEPDS | /* parity err. syn.q.*/ + FM_SPCEPDA0 | /* parity err. a.q.0 */ + FM_SPCEPDA1)) { /* parity err. a.q.1 */ + SMT_PANIC(smc,SMT_E0134, SMT_E0134_MSG) ; + } + /* + * buffer underrun: can only occur if a tx threshold is specified + */ + if (stl & (FM_STBURS | /* tx buffer underrun syn.q.*/ + FM_STBURA0 | /* tx buffer underrun a.q.0 */ + FM_STBURA1)) { /* tx buffer underrun a.q.2 */ + SMT_PANIC(smc,SMT_E0133, SMT_E0133_MSG) ; + } + + if ( (stu & (FM_SXMTABT | /* transmit abort */ + FM_STXABRS | /* syn. tx abort */ + FM_STXABRA0)) || /* asyn. tx abort */ + (stl & (FM_SQLCKS | /* lock for syn. q. */ + FM_SQLCKA0)) ) { /* lock for asyn. q. */ + formac_tx_restart(smc) ; /* init tx */ + restart_tx = 1 ; + stu = inpw(FM_A(FM_ST1U)) ; + stl = inpw(FM_A(FM_ST1L)) ; + stu &= ~ (FM_STECFRMA0 | FM_STEFRMA0 | FM_STEFRMS) ; + if (stu || stl) + goto again ; + } + + if (stu & (FM_STEFRMA0 | /* end of asyn tx */ + FM_STEFRMS)) { /* end of sync tx */ + restart_tx = 1 ; + } + + if (restart_tx) + llc_restart_tx(smc) ; +} + +/* + * interrupt source= plc1 + * this function is called in nwfbisr.asm + */ +void plc1_irq(struct s_smc *smc) +{ + u_short st = inpw(PLC(PB,PL_INTR_EVENT)) ; + + plc_irq(smc,PB,st) ; +} + +/* + * interrupt source= plc2 + * this function is called in nwfbisr.asm + */ +void plc2_irq(struct s_smc *smc) +{ + u_short st = inpw(PLC(PA,PL_INTR_EVENT)) ; + + plc_irq(smc,PA,st) ; +} + + +/* + * interrupt source= timer + */ +void timer_irq(struct s_smc *smc) +{ + hwt_restart(smc); + smc->hw.t_stop = smc->hw.t_start; + smt_timer_done(smc) ; +} + +/* + * return S-port (PA or PB) + */ +int pcm_get_s_port(struct s_smc *smc) +{ + SK_UNUSED(smc) ; + return PS; +} + +/* + * Station Label = "FDDI-XYZ" where + * + * X = connector type + * Y = PMD type + * Z = port type + */ +#define STATION_LABEL_CONNECTOR_OFFSET 5 +#define STATION_LABEL_PMD_OFFSET 6 +#define STATION_LABEL_PORT_OFFSET 7 + +void read_address(struct s_smc *smc, u_char *mac_addr) +{ + char ConnectorType ; + char PmdType ; + int i ; + +#ifdef PCI + for (i = 0; i < 6; i++) { /* read mac address from board */ + smc->hw.fddi_phys_addr.a[i] = + bitrev8(inp(ADDR(B2_MAC_0+i))); + } +#endif + + ConnectorType = inp(ADDR(B2_CONN_TYP)) ; + PmdType = inp(ADDR(B2_PMD_TYP)) ; + + smc->y[PA].pmd_type[PMD_SK_CONN] = + smc->y[PB].pmd_type[PMD_SK_CONN] = ConnectorType ; + smc->y[PA].pmd_type[PMD_SK_PMD ] = + smc->y[PB].pmd_type[PMD_SK_PMD ] = PmdType ; + + if (mac_addr) { + for (i = 0; i < 6 ;i++) { + smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ; + smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]); + } + return ; + } + smc->hw.fddi_home_addr = smc->hw.fddi_phys_addr ; + + for (i = 0; i < 6 ;i++) { + smc->hw.fddi_canon_addr.a[i] = + bitrev8(smc->hw.fddi_phys_addr.a[i]); + } +} + +/* + * FDDI card soft reset + */ +void init_board(struct s_smc *smc, u_char *mac_addr) +{ + card_start(smc) ; + read_address(smc,mac_addr) ; + + if (!(inp(ADDR(B0_DAS)) & DAS_AVAIL)) + smc->s.sas = SMT_SAS ; /* Single att. station */ + else + smc->s.sas = SMT_DAS ; /* Dual att. station */ + + if (!(inp(ADDR(B0_DAS)) & DAS_BYP_ST)) + smc->mib.fddiSMTBypassPresent = 0 ; + /* without opt. bypass */ + else + smc->mib.fddiSMTBypassPresent = 1 ; + /* with opt. bypass */ +} + +/* + * insert or deinsert optical bypass (called by ECM) + */ +void sm_pm_bypass_req(struct s_smc *smc, int mode) +{ + DB_ECMN(1,"ECM : sm_pm_bypass_req(%s)\n",(mode == BP_INSERT) ? + "BP_INSERT" : "BP_DEINSERT",0) ; + + if (smc->s.sas != SMT_DAS) + return ; + +#ifdef PCI + switch(mode) { + case BP_INSERT : + outp(ADDR(B0_DAS),DAS_BYP_INS) ; /* insert station */ + break ; + case BP_DEINSERT : + outp(ADDR(B0_DAS),DAS_BYP_RMV) ; /* bypass station */ + break ; + } +#endif +} + +/* + * check if bypass connected + */ +int sm_pm_bypass_present(struct s_smc *smc) +{ + return (inp(ADDR(B0_DAS)) & DAS_BYP_ST) ? TRUE : FALSE; +} + +void plc_clear_irq(struct s_smc *smc, int p) +{ + SK_UNUSED(p) ; + + SK_UNUSED(smc) ; +} + + +/* + * led_indication called by rmt_indication() and + * pcm_state_change() + * + * Input: + * smc: SMT context + * led_event: + * 0 Only switch green LEDs according to their respective PCM state + * LED_Y_OFF just switch yellow LED off + * LED_Y_ON just switch yello LED on + */ +static void led_indication(struct s_smc *smc, int led_event) +{ + /* use smc->hw.mac_ring_is_up == TRUE + * as indication for Ring Operational + */ + u_short led_state ; + struct s_phy *phy ; + struct fddi_mib_p *mib_a ; + struct fddi_mib_p *mib_b ; + + phy = &smc->y[PA] ; + mib_a = phy->mib ; + phy = &smc->y[PB] ; + mib_b = phy->mib ; + +#ifdef PCI + led_state = 0 ; + + /* Ring up = yellow led OFF*/ + if (led_event == LED_Y_ON) { + led_state |= LED_MY_ON ; + } + else if (led_event == LED_Y_OFF) { + led_state |= LED_MY_OFF ; + } + else { /* PCM state changed */ + /* Link at Port A/S = green led A ON */ + if (mib_a->fddiPORTPCMState == PC8_ACTIVE) { + led_state |= LED_GA_ON ; + } + else { + led_state |= LED_GA_OFF ; + } + + /* Link at Port B = green led B ON */ + if (mib_b->fddiPORTPCMState == PC8_ACTIVE) { + led_state |= LED_GB_ON ; + } + else { + led_state |= LED_GB_OFF ; + } + } + + outp(ADDR(B0_LED), led_state) ; +#endif /* PCI */ + +} + + +void pcm_state_change(struct s_smc *smc, int plc, int p_state) +{ + /* + * the current implementation of pcm_state_change() in the driver + * parts must be renamed to drv_pcm_state_change() which will be called + * now after led_indication. + */ + DRV_PCM_STATE_CHANGE(smc,plc,p_state) ; + + led_indication(smc,0) ; +} + + +void rmt_indication(struct s_smc *smc, int i) +{ + /* Call a driver special function if defined */ + DRV_RMT_INDICATION(smc,i) ; + + led_indication(smc, i ? LED_Y_OFF : LED_Y_ON) ; +} + + +/* + * llc_recover_tx called by init_tx (fplus.c) + */ +void llc_recover_tx(struct s_smc *smc) +{ +#ifdef LOAD_GEN + extern int load_gen_flag ; + + load_gen_flag = 0 ; +#endif +#ifndef SYNC + smc->hw.n_a_send= 0 ; +#else + SK_UNUSED(smc) ; +#endif +} + +#ifdef MULT_OEM +static int is_equal_num(char comp1[], char comp2[], int num) +{ + int i ; + + for (i = 0 ; i < num ; i++) { + if (comp1[i] != comp2[i]) + return 0; + } + return 1; +} /* is_equal_num */ + + +/* + * set the OEM ID defaults, and test the contents of the OEM data base + * The default OEM is the first ACTIVE entry in the OEM data base + * + * returns: 0 success + * 1 error in data base + * 2 data base empty + * 3 no active entry + */ +int set_oi_id_def(struct s_smc *smc) +{ + int sel_id ; + int i ; + int act_entries ; + + i = 0 ; + sel_id = -1 ; + act_entries = FALSE ; + smc->hw.oem_id = 0 ; + smc->hw.oem_min_status = OI_STAT_ACTIVE ; + + /* check OEM data base */ + while (oem_ids[i].oi_status) { + switch (oem_ids[i].oi_status) { + case OI_STAT_ACTIVE: + act_entries = TRUE ; /* we have active IDs */ + if (sel_id == -1) + sel_id = i ; /* save the first active ID */ + case OI_STAT_VALID: + case OI_STAT_PRESENT: + i++ ; + break ; /* entry ok */ + default: + return 1; /* invalid oi_status */ + } + } + + if (i == 0) + return 2; + if (!act_entries) + return 3; + + /* ok, we have a valid OEM data base with an active entry */ + smc->hw.oem_id = (struct s_oem_ids *) &oem_ids[sel_id] ; + return 0; +} +#endif /* MULT_OEM */ + +void driver_get_bia(struct s_smc *smc, struct fddi_addr *bia_addr) +{ + int i ; + + for (i = 0 ; i < 6 ; i++) + bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]); +} + +void smt_start_watchdog(struct s_smc *smc) +{ + SK_UNUSED(smc) ; /* Make LINT happy. */ + +#ifndef DEBUG + +#ifdef PCI + if (smc->hw.wdog_used) { + outpw(ADDR(B2_WDOG_CRTL),TIM_START) ; /* Start timer. */ + } +#endif + +#endif /* DEBUG */ +} + +static void smt_stop_watchdog(struct s_smc *smc) +{ + SK_UNUSED(smc) ; /* Make LINT happy. */ +#ifndef DEBUG + +#ifdef PCI + if (smc->hw.wdog_used) { + outpw(ADDR(B2_WDOG_CRTL),TIM_STOP) ; /* Stop timer. */ + } +#endif + +#endif /* DEBUG */ +} + +#ifdef PCI + +void mac_do_pci_fix(struct s_smc *smc) +{ + SK_UNUSED(smc) ; +} +#endif /* PCI */ + -- cgit v1.2.3-54-g00ecf