From 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Tue, 15 Dec 2015 14:52:16 -0300
Subject: Linux-libre 4.3.2-gnu

---
 drivers/net/phy/marvell.c | 62 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 60 insertions(+), 2 deletions(-)

(limited to 'drivers/net/phy/marvell.c')

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f721444c2..5de8d5827 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -48,8 +48,11 @@
 #define MII_M1011_IMASK_CLEAR		0x0000
 
 #define MII_M1011_PHY_SCR		0x10
+#define MII_M1011_PHY_SCR_MDI		0x0000
+#define MII_M1011_PHY_SCR_MDI_X		0x0020
 #define MII_M1011_PHY_SCR_AUTO_CROSS	0x0060
 
+#define MII_M1145_PHY_EXT_ADDR_PAGE	0x16
 #define MII_M1145_PHY_EXT_SR		0x1b
 #define MII_M1145_PHY_EXT_CR		0x14
 #define MII_M1145_RGMII_RX_DELAY	0x0080
@@ -159,6 +162,43 @@ static int marvell_config_intr(struct phy_device *phydev)
 	return err;
 }
 
+static int marvell_set_polarity(struct phy_device *phydev, int polarity)
+{
+	int reg;
+	int err;
+	int val;
+
+	/* get the current settings */
+	reg = phy_read(phydev, MII_M1011_PHY_SCR);
+	if (reg < 0)
+		return reg;
+
+	val = reg;
+	val &= ~MII_M1011_PHY_SCR_AUTO_CROSS;
+	switch (polarity) {
+	case ETH_TP_MDI:
+		val |= MII_M1011_PHY_SCR_MDI;
+		break;
+	case ETH_TP_MDI_X:
+		val |= MII_M1011_PHY_SCR_MDI_X;
+		break;
+	case ETH_TP_MDI_AUTO:
+	case ETH_TP_MDI_INVALID:
+	default:
+		val |= MII_M1011_PHY_SCR_AUTO_CROSS;
+		break;
+	}
+
+	if (val != reg) {
+		/* Set the new polarity value in the register */
+		err = phy_write(phydev, MII_M1011_PHY_SCR, val);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 static int marvell_config_aneg(struct phy_device *phydev)
 {
 	int err;
@@ -191,8 +231,7 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_M1011_PHY_SCR,
-			MII_M1011_PHY_SCR_AUTO_CROSS);
+	err = marvell_set_polarity(phydev, phydev->mdix);
 	if (err < 0)
 		return err;
 
@@ -514,6 +553,16 @@ static int m88e1111_config_init(struct phy_device *phydev)
 		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
 		if (err < 0)
 			return err;
+
+		/* make sure copper is selected */
+		err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE,
+				err & (~0xff));
+		if (err < 0)
+			return err;
 	}
 
 	if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
@@ -736,6 +785,7 @@ static int marvell_read_status(struct phy_device *phydev)
 	int adv;
 	int err;
 	int lpa;
+	int lpagb;
 	int status = 0;
 
 	/* Update the link, but return if there
@@ -753,10 +803,17 @@ static int marvell_read_status(struct phy_device *phydev)
 		if (lpa < 0)
 			return lpa;
 
+		lpagb = phy_read(phydev, MII_STAT1000);
+		if (lpagb < 0)
+			return lpagb;
+
 		adv = phy_read(phydev, MII_ADVERTISE);
 		if (adv < 0)
 			return adv;
 
+		phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) |
+					 mii_lpa_to_ethtool_lpa_t(lpa);
+
 		lpa &= adv;
 
 		if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
@@ -804,6 +861,7 @@ static int marvell_read_status(struct phy_device *phydev)
 			phydev->speed = SPEED_10;
 
 		phydev->pause = phydev->asym_pause = 0;
+		phydev->lp_advertising = 0;
 	}
 
 	return 0;
-- 
cgit v1.2.3-54-g00ecf