From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/net/wireless/Kconfig | 287 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 287 insertions(+) create mode 100644 drivers/net/wireless/Kconfig (limited to 'drivers/net/wireless/Kconfig') diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig new file mode 100644 index 000000000..16604bdf5 --- /dev/null +++ b/drivers/net/wireless/Kconfig @@ -0,0 +1,287 @@ +# +# Wireless LAN device configuration +# + +menuconfig WLAN + bool "Wireless LAN" + depends on !S390 + depends on NET + select WIRELESS + default y + ---help--- + This section contains all the pre 802.11 and 802.11 wireless + device drivers. For a complete list of drivers and documentation + on them refer to the wireless wiki: + + http://wireless.kernel.org/en/users/Drivers + +if WLAN + +config PCMCIA_RAYCS + tristate "Aviator/Raytheon 2.4GHz wireless support" + depends on PCMCIA + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + ---help--- + Say Y here if you intend to attach an Aviator/Raytheon PCMCIA + (PC-card) wireless Ethernet networking card to your computer. + Please read the file for + details. + + To compile this driver as a module, choose M here: the module will be + called ray_cs. If unsure, say N. + +config LIBERTAS_THINFIRM + tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" + depends on MAC80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices using thinfirm. + +config LIBERTAS_THINFIRM_DEBUG + bool "Enable full debugging output in the Libertas thin firmware module." + depends on LIBERTAS_THINFIRM + ---help--- + Debugging support. + +config LIBERTAS_THINFIRM_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" + depends on LIBERTAS_THINFIRM && USB + ---help--- + A driver for Marvell Libertas 8388 USB devices using thinfirm. + +config AIRO + tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" + depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN) + select WIRELESS_EXT + select CRYPTO + select WEXT_SPY + select WEXT_PRIV + ---help--- + This is the standard Linux driver to support Cisco/Aironet ISA and + PCI 802.11 wireless cards. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + + The driver can be compiled as a module and will be named "airo". + +config ATMEL + tristate "Atmel at76c50x chipset 802.11b support" + depends on CFG80211 && (PCI || PCMCIA) + select WIRELESS_EXT + select WEXT_PRIV + select FW_LOADER + select CRC32 + ---help--- + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. + + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + + +config PCI_ATMEL + tristate "Atmel at76c506 PCI cards" + depends on ATMEL && PCI + ---help--- + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. + +config PCMCIA_ATMEL + tristate "Atmel at76c502/at76c504 PCMCIA cards" + depends on ATMEL && PCMCIA + select WIRELESS_EXT + select FW_LOADER + select CRC32 + ---help--- + Enable support for PCMCIA cards containing the + Atmel at76c502 and at76c504 chips. + +config AT76C50X_USB + tristate "Atmel at76c503/at76c505/at76c505a USB cards" + depends on MAC80211 && USB + select FW_LOADER + ---help--- + Enable support for USB Wireless devices using Atmel at76c503, + at76c505 or at76c505a chips. + +config AIRO_CS + tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" + depends on CFG80211 && PCMCIA && (BROKEN || !M32R) + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select CRYPTO + select CRYPTO_AES + ---help--- + This is the standard Linux driver to support Cisco/Aironet PCMCIA + 802.11 wireless cards. This driver is the same as the Aironet + driver part of the Linux Pcmcia package. + It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X + - with or without encryption) as well as card before the Cisco + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also + supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom + 802.11b cards. + + This driver support both the standard Linux Wireless Extensions + and Cisco proprietary API, so both the Linux Wireless Tools and the + Cisco Linux utilities can be used to configure the card. + +config PCMCIA_WL3501 + tristate "Planet WL3501 PCMCIA cards" + depends on CFG80211 && PCMCIA + select WIRELESS_EXT + select WEXT_SPY + help + A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. + It has basic support for Linux wireless extensions and initial + micro support for ethtool. + +config PRISM54 + tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)' + depends on PCI + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select FW_LOADER + ---help--- + This enables support for FullMAC PCI/Cardbus prism54 devices. This + driver is now deprecated in favor for the SoftMAC driver, p54pci. + p54pci supports FullMAC PCI/Cardbus devices as well. + + For more information refer to the p54 wiki: + + http://wireless.kernel.org/en/users/Drivers/p54 + + Note: You need a motherboard with DMA support to use any of these cards + + When built as module you get the module prism54 + +config USB_ZD1201 + tristate "USB ZD1201 based Wireless device support" + depends on CFG80211 && USB + select WIRELESS_EXT + select WEXT_PRIV + select FW_LOADER + ---help--- + Say Y if you want to use wireless LAN adapters based on the ZyDAS + ZD1201 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on wlan0. + + The zd1201 device requires external firmware to be loaded. + This can be found at http://linux-lc100020.sourceforge.net/ + + To compile this driver as a module, choose M here: the + module will be called zd1201. + +config USB_NET_RNDIS_WLAN + tristate "Wireless RNDIS USB support" + depends on USB + depends on CFG80211 + select USB_NET_DRIVERS + select USB_USBNET + select USB_NET_CDCETHER + select USB_NET_RNDIS_HOST + ---help--- + This is a driver for wireless RNDIS devices. + These are USB based adapters found in devices such as: + + Buffalo WLI-U2-KG125S + U.S. Robotics USR5421 + Belkin F5D7051 + Linksys WUSB54GSv2 + Linksys WUSB54GSC + Asus WL169gE + Eminent EM4045 + BT Voyager 1055 + Linksys WUSB54GSv1 + U.S. Robotics USR5420 + BUFFALO WLI-USB-G54 + + All of these devices are based on Broadcom 4320 chip which is the + only wireless RNDIS chip known to date. + + If you choose to build a module, it'll be called rndis_wlan. + +source "drivers/net/wireless/rtl818x/Kconfig" + +config ADM8211 + tristate "ADMtek ADM8211 support" + depends on MAC80211 && PCI + select CRC32 + select EEPROM_93CX6 + ---help--- + This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. + These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: + + Xterasys Cardbus XN-2411b + Blitz NetWave Point PC + TrendNet 221pc + Belkin F5D6001 + SMC 2635W + Linksys WPC11 v1 + Fiberline FL-WL-200X + 3com Office Connect (3CRSHPW796) + Corega WLPCIB-11 + SMC 2602W V2 EU + D-Link DWL-520 Revision C + + However, some of these cards have been replaced with other chips + like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or + the Ralink RT2400 (SMC2635W) without a model number change. + + Thanks to Infineon-ADMtek for their support of this driver. + +config MAC80211_HWSIM + tristate "Simulated radio testing tool for mac80211" + depends on MAC80211 + ---help--- + This driver is a developer testing tool that can be used to test + IEEE 802.11 networking stack (mac80211) functionality. This is not + needed for normal wireless LAN usage and is only for testing. See + Documentation/networking/mac80211_hwsim for more information on how + to use this tool. + + To compile this driver as a module, choose M here: the module will be + called mac80211_hwsim. If unsure, say N. + +config MWL8K + tristate "Marvell 88W8xxx PCI/PCIe Wireless support" + depends on MAC80211 && PCI + ---help--- + This driver supports Marvell TOPDOG 802.11 wireless cards. + + To compile this driver as a module, choose M here: the module + will be called mwl8k. If unsure, say N. + +source "drivers/net/wireless/ath/Kconfig" +source "drivers/net/wireless/b43/Kconfig" +source "drivers/net/wireless/b43legacy/Kconfig" +source "drivers/net/wireless/brcm80211/Kconfig" +source "drivers/net/wireless/hostap/Kconfig" +source "drivers/net/wireless/ipw2x00/Kconfig" +source "drivers/net/wireless/iwlwifi/Kconfig" +source "drivers/net/wireless/iwlegacy/Kconfig" +source "drivers/net/wireless/libertas/Kconfig" +source "drivers/net/wireless/orinoco/Kconfig" +source "drivers/net/wireless/p54/Kconfig" +source "drivers/net/wireless/rt2x00/Kconfig" +source "drivers/net/wireless/rtlwifi/Kconfig" +source "drivers/net/wireless/ti/Kconfig" +source "drivers/net/wireless/zd1211rw/Kconfig" +source "drivers/net/wireless/mwifiex/Kconfig" +source "drivers/net/wireless/cw1200/Kconfig" +source "drivers/net/wireless/rsi/Kconfig" + +endif # WLAN -- cgit v1.2.3