From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/net/wireless/b43/phy_g.h | 208 --------------------------------------- 1 file changed, 208 deletions(-) delete mode 100644 drivers/net/wireless/b43/phy_g.h (limited to 'drivers/net/wireless/b43/phy_g.h') diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h deleted file mode 100644 index 5413c906a..000000000 --- a/drivers/net/wireless/b43/phy_g.h +++ /dev/null @@ -1,208 +0,0 @@ -#ifndef LINUX_B43_PHY_G_H_ -#define LINUX_B43_PHY_G_H_ - -/* OFDM PHY registers are defined in the A-PHY header. */ -#include "phy_a.h" - -/* CCK (B) PHY Registers */ -#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ -#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ -#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ -#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ -#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ -#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 -#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ -#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ -#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ -#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ -#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) -#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ -#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ -#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ - -/* Extended G-PHY Registers */ -#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ -#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ -#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ -#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ -#define B43_PHY_GTABNR_SHIFT 10 -#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ -#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ -#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ -#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ -#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ -#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 -#define B43_PHY_RFOVERVAL_LNA 0x7000 -#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 -#define B43_PHY_RFOVERVAL_PGA 0x0F00 -#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 -#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ -#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 -#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ -#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ -#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ -#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ -#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ - - -/*** G-PHY table numbers */ -#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) -#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) -#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) -#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) - -u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); -void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); - - -/* Returns the boolean whether "TX Magnification" is enabled. */ -#define has_tx_magnification(phy) \ - (((phy)->rev >= 2) && \ - ((phy)->radio_ver == 0x2050) && \ - ((phy)->radio_rev == 8)) -/* Card uses the loopback gain stuff */ -#define has_loopback_gain(phy) \ - (((phy)->rev > 1) || ((phy)->gmode)) - -/* Radio Attenuation (RF Attenuation) */ -struct b43_rfatt { - u8 att; /* Attenuation value */ - bool with_padmix; /* Flag, PAD Mixer enabled. */ -}; -struct b43_rfatt_list { - /* Attenuation values list */ - const struct b43_rfatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_rfatt(const struct b43_rfatt *a, - const struct b43_rfatt *b) -{ - return ((a->att == b->att) && - (a->with_padmix == b->with_padmix)); -} - -/* Baseband Attenuation */ -struct b43_bbatt { - u8 att; /* Attenuation value */ -}; -struct b43_bbatt_list { - /* Attenuation values list */ - const struct b43_bbatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_bbatt(const struct b43_bbatt *a, - const struct b43_bbatt *b) -{ - return (a->att == b->att); -} - -/* tx_control bits. */ -#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ -#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ -#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ - -struct b43_txpower_lo_control; - -struct b43_phy_g { - /* ACI (adjacent channel interference) flags. */ - bool aci_enable; - bool aci_wlan_automatic; - bool aci_hw_rssi; - - /* Radio switched on/off */ - bool radio_on; - struct { - /* Values saved when turning the radio off. - * They are needed when turning it on again. */ - bool valid; - u16 rfover; - u16 rfoverval; - } radio_off_context; - - u16 minlowsig[2]; - u16 minlowsigpos[2]; - - /* Pointer to the table used to convert a - * TSSI value to dBm-Q5.2 */ - const s8 *tssi2dbm; - /* tssi2dbm is kmalloc()ed. Only used for free()ing. */ - bool dyn_tssi_tbl; - /* Target idle TSSI */ - int tgt_idle_tssi; - /* Current idle TSSI */ - int cur_idle_tssi; - /* The current average TSSI. */ - u8 average_tssi; - /* Current TX power level attenuation control values */ - struct b43_bbatt bbatt; - struct b43_rfatt rfatt; - u8 tx_control; /* B43_TXCTL_XXX */ - /* The calculated attenuation deltas that are used later - * when adjusting the actual power output. */ - int bbatt_delta; - int rfatt_delta; - - /* LocalOscillator control values. */ - struct b43_txpower_lo_control *lo_control; - /* Values from b43_calc_loopback_gain() */ - s16 max_lb_gain; /* Maximum Loopback gain in hdB */ - s16 trsw_rx_gain; /* TRSW RX gain in hdB */ - s16 lna_lod_gain; /* LNA lod */ - s16 lna_gain; /* LNA */ - s16 pga_gain; /* PGA */ - - /* Current Interference Mitigation mode */ - int interfmode; - /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is laid out as follows: - * bit 0-11: offset - * bit 12-15: register ID - * bit 16-32: value - * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT - */ -#define B43_INTERFSTACK_SIZE 26 - u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure - - /* Saved values from the NRSSI Slope calculation */ - s16 nrssi[2]; - s32 nrssislope; - /* In memory nrssi lookup table. */ - s8 nrssi_lt[64]; - - u16 lofcal; - - u16 initval; //FIXME rename? - - /* The device does address auto increment for the OFDM tables. - * We cache the previously used address here and omit the address - * write on the next table access, if possible. */ - u16 ofdmtab_addr; /* The address currently set in hardware. */ - enum { /* The last data flow direction. */ - B43_OFDMTAB_DIRECTION_UNKNOWN = 0, - B43_OFDMTAB_DIRECTION_READ, - B43_OFDMTAB_DIRECTION_WRITE, - } ofdmtab_addr_direction; -}; - -void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation); -void b43_gphy_channel_switch(struct b43_wldev *dev, - unsigned int channel, - bool synthetic_pu_workaround); -u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, - s16 pab0, s16 pab1, s16 pab2); - -struct b43_phy_operations; -extern const struct b43_phy_operations b43_phyops_g; - -#endif /* LINUX_B43_PHY_G_H_ */ -- cgit v1.2.3-54-g00ecf