From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- .../net/wireless/intel/iwlwifi/mvm/fw-api-tof.h | 386 +++++++++++++++++++++ 1 file changed, 386 insertions(+) create mode 100644 drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h new file mode 100644 index 000000000..86aa51b22 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tof.h @@ -0,0 +1,386 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2015 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef __fw_api_tof_h__ +#define __fw_api_tof_h__ + +#include "fw-api.h" + +/* ToF sub-group command IDs */ +enum iwl_mvm_tof_sub_grp_ids { + TOF_RANGE_REQ_CMD = 0x1, + TOF_CONFIG_CMD = 0x2, + TOF_RANGE_ABORT_CMD = 0x3, + TOF_RANGE_REQ_EXT_CMD = 0x4, + TOF_RESPONDER_CONFIG_CMD = 0x5, + TOF_NW_INITIATED_RES_SEND_CMD = 0x6, + TOF_NEIGHBOR_REPORT_REQ_CMD = 0x7, + TOF_NEIGHBOR_REPORT_RSP_NOTIF = 0xFC, + TOF_NW_INITIATED_REQ_RCVD_NOTIF = 0xFD, + TOF_RANGE_RESPONSE_NOTIF = 0xFE, + TOF_MCSI_DEBUG_NOTIF = 0xFB, +}; + +/** + * struct iwl_tof_config_cmd - ToF configuration + * @tof_disabled: 0 enabled, 1 - disabled + * @one_sided_disabled: 0 enabled, 1 - disabled + * @is_debug_mode: 1 debug mode, 0 - otherwise + * @is_buf_required: 1 channel estimation buffer required, 0 - otherwise + */ +struct iwl_tof_config_cmd { + __le32 sub_grp_cmd_id; + u8 tof_disabled; + u8 one_sided_disabled; + u8 is_debug_mode; + u8 is_buf_required; +} __packed; + +/** + * struct iwl_tof_responder_config_cmd - ToF AP mode (for debug) + * @burst_period: future use: (currently hard coded in the LMAC) + * The interval between two sequential bursts. + * @min_delta_ftm: future use: (currently hard coded in the LMAC) + * The minimum delay between two sequential FTM Responses + * in the same burst. + * @burst_duration: future use: (currently hard coded in the LMAC) + * The total time for all FTMs handshake in the same burst. + * Affect the time events duration in the LMAC. + * @num_of_burst_exp: future use: (currently hard coded in the LMAC) + * The number of bursts for the current ToF request. Affect + * the number of events allocations in the current iteration. + * @get_ch_est: for xVT only, NA for driver + * @abort_responder: when set to '1' - Responder will terminate its activity + * (all other fields in the command are ignored) + * @recv_sta_req_params: 1 - Responder will ignore the other Responder's + * params and use the recomended Initiator params. + * 0 - otherwise + * @channel_num: current AP Channel + * @bandwidth: current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @rate: current AP rate + * @ctrl_ch_position: coding of the control channel position relative to + * the center frequency. + * 40MHz 0 below center, 1 above center + * 80MHz bits [0..1]: 0 the near 20MHz to the center, + * 1 the far 20MHz to the center + * bit[2] as above 40MHz + * @ftm_per_burst: FTMs per Burst + * @ftm_resp_ts_avail: '0' - we don't measure over the Initial FTM Response, + * '1' - we measure over the Initial FTM Response + * @asap_mode: ASAP / Non ASAP mode for the current WLS station + * @sta_id: index of the AP STA when in AP mode + * @tsf_timer_offset_msecs: The dictated time offset (mSec) from the AP's TSF + * @toa_offset: Artificial addition [0.1nsec] for the ToA - to be used for debug + * purposes, simulating station movement by adding various values + * to this field + * @bssid: Current AP BSSID + */ +struct iwl_tof_responder_config_cmd { + __le32 sub_grp_cmd_id; + __le16 burst_period; + u8 min_delta_ftm; + u8 burst_duration; + u8 num_of_burst_exp; + u8 get_ch_est; + u8 abort_responder; + u8 recv_sta_req_params; + u8 channel_num; + u8 bandwidth; + u8 rate; + u8 ctrl_ch_position; + u8 ftm_per_burst; + u8 ftm_resp_ts_avail; + u8 asap_mode; + u8 sta_id; + __le16 tsf_timer_offset_msecs; + __le16 toa_offset; + u8 bssid[ETH_ALEN]; +} __packed; + +/** + * struct iwl_tof_range_request_ext_cmd - extended range req for WLS + * @tsf_timer_offset_msec: the recommended time offset (mSec) from the AP's TSF + * @min_delta_ftm: Minimal time between two consecutive measurements, + * in units of 100us. 0 means no preference by station + * @ftm_format_and_bw20M: FTM Channel Spacing/Format for 20MHz: recommended + * value be sent to the AP + * @ftm_format_and_bw40M: FTM Channel Spacing/Format for 40MHz: recommended + * value to be sent to the AP + * @ftm_format_and_bw80M: FTM Channel Spacing/Format for 80MHz: recommended + * value to be sent to the AP + */ +struct iwl_tof_range_req_ext_cmd { + __le32 sub_grp_cmd_id; + __le16 tsf_timer_offset_msec; + __le16 reserved; + u8 min_delta_ftm; + u8 ftm_format_and_bw20M; + u8 ftm_format_and_bw40M; + u8 ftm_format_and_bw80M; +} __packed; + +#define IWL_MVM_TOF_MAX_APS 21 + +/** + * struct iwl_tof_range_req_ap_entry - AP configuration parameters + * @channel_num: Current AP Channel + * @bandwidth: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @tsf_delta_direction: TSF relatively to the subject AP + * @ctrl_ch_position: Coding of the control channel position relative to the + * center frequency. + * 40MHz 0 below center, 1 above center + * 80MHz bits [0..1]: 0 the near 20MHz to the center, + * 1 the far 20MHz to the center + * bit[2] as above 40MHz + * @bssid: AP's bss id + * @measure_type: Measurement type: 0 - two sided, 1 - One sided + * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of the + * number of measurement iterations (min 2^0 = 1, max 2^14) + * @burst_period: Recommended value to be sent to the AP. Measurement + * periodicity In units of 100ms. ignored if num_of_bursts = 0 + * @samples_per_burst: 2-sided: the number of FTMs pairs in single Burst (1-31) + * 1-sided: how many rts/cts pairs should be used per burst. + * @retries_per_sample: Max number of retries that the LMAC should send + * in case of no replies by the AP. + * @tsf_delta: TSF Delta in units of microseconds. + * The difference between the AP TSF and the device local clock. + * @location_req: Location Request Bit[0] LCI should be sent in the FTMR + * Bit[1] Civic should be sent in the FTMR + * @asap_mode: 0 - non asap mode, 1 - asap mode (not relevant for one sided) + * @enable_dyn_ack: Enable Dynamic ACK BW. + * 0 Initiator interact with regular AP + * 1 Initiator interact with Responder machine: need to send the + * Initiator Acks with HT 40MHz / 80MHz, since the Responder should + * use it for its ch est measurement (this flag will be set when we + * configure the opposite machine to be Responder). + * @rssi: Last received value + * leagal values: -128-0 (0x7f). above 0x0 indicating an invalid value. + */ +struct iwl_tof_range_req_ap_entry { + u8 channel_num; + u8 bandwidth; + u8 tsf_delta_direction; + u8 ctrl_ch_position; + u8 bssid[ETH_ALEN]; + u8 measure_type; + u8 num_of_bursts; + __le16 burst_period; + u8 samples_per_burst; + u8 retries_per_sample; + __le32 tsf_delta; + u8 location_req; + u8 asap_mode; + u8 enable_dyn_ack; + s8 rssi; +} __packed; + +/** + * enum iwl_tof_response_mode + * @IWL_MVM_TOF_RESPOSE_ASAP: report each AP measurement separately as soon as + * possible (not supported for this release) + * @IWL_MVM_TOF_RESPOSE_TIMEOUT: report all AP measurements as a batch upon + * timeout expiration + * @IWL_MVM_TOF_RESPOSE_COMPLETE: report all AP measurements as a batch at the + * earlier of: measurements completion / timeout + * expiration. + */ +enum iwl_tof_response_mode { + IWL_MVM_TOF_RESPOSE_ASAP = 1, + IWL_MVM_TOF_RESPOSE_TIMEOUT, + IWL_MVM_TOF_RESPOSE_COMPLETE, +}; + +/** + * struct iwl_tof_range_req_cmd - start measurement cmd + * @request_id: A Token incremented per request. The same Token will be + * sent back in the range response + * @initiator: 0- NW initiated, 1 - Client Initiated + * @one_sided_los_disable: '0'- run ML-Algo for both ToF/OneSided, + * '1' - run ML-Algo for ToF only + * @req_timeout: Requested timeout of the response in units of 100ms. + * This is equivalent to the session time configured to the + * LMAC in Initiator Request + * @report_policy: Supported partially for this release: For current release - + * the range report will be uploaded as a batch when ready or + * when the session is done (successfully / partially). + * one of iwl_tof_response_mode. + * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + * @macaddr_random: '0' Use default source MAC address (i.e. p2_p), + * '1' Use MAC Address randomization according to the below + * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. + * Bits set to 1 shall be randomized by the UMAC + */ +struct iwl_tof_range_req_cmd { + __le32 sub_grp_cmd_id; + u8 request_id; + u8 initiator; + u8 one_sided_los_disable; + u8 req_timeout; + u8 report_policy; + u8 los_det_disable; + u8 num_of_ap; + u8 macaddr_random; + u8 macaddr_template[ETH_ALEN]; + u8 macaddr_mask[ETH_ALEN]; + struct iwl_tof_range_req_ap_entry ap[IWL_MVM_TOF_MAX_APS]; +} __packed; + +/** + * struct iwl_tof_gen_resp_cmd - generic ToF response + */ +struct iwl_tof_gen_resp_cmd { + __le32 sub_grp_cmd_id; + u8 data[]; +} __packed; + +/** + * struct iwl_tof_range_rsp_ap_entry_ntfy - AP parameters (response) + * @measure_status: current APs measurement status + * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz + * @rtt: The Round Trip Time that took for the last measurement for + * current AP [nSec] + * @rtt_variance: The Variance of the RTT values measured for current AP + * @rtt_spread: The Difference between the maximum and the minimum RTT + * values measured for current AP in the current session [nsec] + * @rssi: RSSI as uploaded in the Channel Estimation notification + * @rssi_spread: The Difference between the maximum and the minimum RSSI values + * measured for current AP in the current session + * @range: Measured range [cm] + * @range_variance: Measured range variance [cm] + * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was + * uploaded by the LMAC + */ +struct iwl_tof_range_rsp_ap_entry_ntfy { + u8 bssid[ETH_ALEN]; + u8 measure_status; + u8 measure_bw; + __le32 rtt; + __le32 rtt_variance; + __le32 rtt_spread; + s8 rssi; + u8 rssi_spread; + __le16 reserved; + __le32 range; + __le32 range_variance; + __le32 timestamp; +} __packed; + +/** + * struct iwl_tof_range_rsp_ntfy - + * @request_id: A Token ID of the corresponding Range request + * @request_status: status of current measurement session + * @last_in_batch: reprot policy (when not all responses are uploaded at once) + * @num_of_aps: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) + */ +struct iwl_tof_range_rsp_ntfy { + u8 request_id; + u8 request_status; + u8 last_in_batch; + u8 num_of_aps; + struct iwl_tof_range_rsp_ap_entry_ntfy ap[IWL_MVM_TOF_MAX_APS]; +} __packed; + +#define IWL_MVM_TOF_MCSI_BUF_SIZE (245) +/** + * struct iwl_tof_mcsi_notif - used for debug + * @token: token ID for the current session + * @role: '0' - initiator, '1' - responder + * @initiator_bssid: initiator machine + * @responder_bssid: responder machine + * @mcsi_buffer: debug data + */ +struct iwl_tof_mcsi_notif { + u8 token; + u8 role; + __le16 reserved; + u8 initiator_bssid[ETH_ALEN]; + u8 responder_bssid[ETH_ALEN]; + u8 mcsi_buffer[IWL_MVM_TOF_MCSI_BUF_SIZE * 4]; +} __packed; + +/** + * struct iwl_tof_neighbor_report_notif + * @bssid: BSSID of the AP which sent the report + * @request_token: same token as the corresponding request + * @status: + * @report_ie_len: the length of the response frame starting from the Element ID + * @data: the IEs + */ +struct iwl_tof_neighbor_report { + u8 bssid[ETH_ALEN]; + u8 request_token; + u8 status; + __le16 report_ie_len; + u8 data[]; +} __packed; + +/** + * struct iwl_tof_range_abort_cmd + * @request_id: corresponds to a range request + */ +struct iwl_tof_range_abort_cmd { + __le32 sub_grp_cmd_id; + u8 request_id; + u8 reserved[3]; +} __packed; + +#endif -- cgit v1.2.3-54-g00ecf