From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/net/wireless/iwlegacy/3945.c | 2741 ---------------------------------- 1 file changed, 2741 deletions(-) delete mode 100644 drivers/net/wireless/iwlegacy/3945.c (limited to 'drivers/net/wireless/iwlegacy/3945.c') diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c deleted file mode 100644 index 93bdf684b..000000000 --- a/drivers/net/wireless/iwlegacy/3945.c +++ /dev/null @@ -1,2741 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "common.h" -#include "3945.h" - -/* Send led command */ -static int -il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd) -{ - struct il_host_cmd cmd = { - .id = C_LEDS, - .len = sizeof(struct il_led_cmd), - .data = led_cmd, - .flags = CMD_ASYNC, - .callback = NULL, - }; - - return il_send_cmd(il, &cmd); -} - -#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ - [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \ - RATE_##r##M_IEEE, \ - RATE_##ip##M_IDX, \ - RATE_##in##M_IDX, \ - RATE_##rp##M_IDX, \ - RATE_##rn##M_IDX, \ - RATE_##pp##M_IDX, \ - RATE_##np##M_IDX, \ - RATE_##r##M_IDX_TBL, \ - RATE_##ip##M_IDX_TBL } - -/* - * Parameter order: - * rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to RATE_INVALID - * - */ -const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = { - IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ - IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ - IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */ -}; - -static inline u8 -il3945_get_prev_ieee_rate(u8 rate_idx) -{ - u8 rate = il3945_rates[rate_idx].prev_ieee; - - if (rate == RATE_INVALID) - rate = rate_idx; - return rate; -} - -/* 1 = enable the il3945_disable_events() function */ -#define IL_EVT_DISABLE (0) -#define IL_EVT_DISABLE_SIZE (1532/32) - -/** - * il3945_disable_events - Disable selected events in uCode event log - * - * Disable an event by writing "1"s into "disable" - * bitmap in SRAM. Bit position corresponds to Event # (id/type). - * Default values of 0 enable uCode events to be logged. - * Use for only special debugging. This function is just a placeholder as-is, - * you'll need to provide the special bits! ... - * ... and set IL_EVT_DISABLE to 1. */ -void -il3945_disable_events(struct il_priv *il) -{ - int i; - u32 base; /* SRAM address of event log header */ - u32 disable_ptr; /* SRAM address of event-disable bitmap array */ - u32 array_size; /* # of u32 entries in array */ - static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = { - 0x00000000, /* 31 - 0 Event id numbers */ - 0x00000000, /* 63 - 32 */ - 0x00000000, /* 95 - 64 */ - 0x00000000, /* 127 - 96 */ - 0x00000000, /* 159 - 128 */ - 0x00000000, /* 191 - 160 */ - 0x00000000, /* 223 - 192 */ - 0x00000000, /* 255 - 224 */ - 0x00000000, /* 287 - 256 */ - 0x00000000, /* 319 - 288 */ - 0x00000000, /* 351 - 320 */ - 0x00000000, /* 383 - 352 */ - 0x00000000, /* 415 - 384 */ - 0x00000000, /* 447 - 416 */ - 0x00000000, /* 479 - 448 */ - 0x00000000, /* 511 - 480 */ - 0x00000000, /* 543 - 512 */ - 0x00000000, /* 575 - 544 */ - 0x00000000, /* 607 - 576 */ - 0x00000000, /* 639 - 608 */ - 0x00000000, /* 671 - 640 */ - 0x00000000, /* 703 - 672 */ - 0x00000000, /* 735 - 704 */ - 0x00000000, /* 767 - 736 */ - 0x00000000, /* 799 - 768 */ - 0x00000000, /* 831 - 800 */ - 0x00000000, /* 863 - 832 */ - 0x00000000, /* 895 - 864 */ - 0x00000000, /* 927 - 896 */ - 0x00000000, /* 959 - 928 */ - 0x00000000, /* 991 - 960 */ - 0x00000000, /* 1023 - 992 */ - 0x00000000, /* 1055 - 1024 */ - 0x00000000, /* 1087 - 1056 */ - 0x00000000, /* 1119 - 1088 */ - 0x00000000, /* 1151 - 1120 */ - 0x00000000, /* 1183 - 1152 */ - 0x00000000, /* 1215 - 1184 */ - 0x00000000, /* 1247 - 1216 */ - 0x00000000, /* 1279 - 1248 */ - 0x00000000, /* 1311 - 1280 */ - 0x00000000, /* 1343 - 1312 */ - 0x00000000, /* 1375 - 1344 */ - 0x00000000, /* 1407 - 1376 */ - 0x00000000, /* 1439 - 1408 */ - 0x00000000, /* 1471 - 1440 */ - 0x00000000, /* 1503 - 1472 */ - }; - - base = le32_to_cpu(il->card_alive.log_event_table_ptr); - if (!il3945_hw_valid_rtc_data_addr(base)) { - IL_ERR("Invalid event log pointer 0x%08X\n", base); - return; - } - - disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32))); - array_size = il_read_targ_mem(il, base + (5 * sizeof(u32))); - - if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) { - D_INFO("Disabling selected uCode log events at 0x%x\n", - disable_ptr); - for (i = 0; i < IL_EVT_DISABLE_SIZE; i++) - il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)), - evt_disable[i]); - - } else { - D_INFO("Selected uCode log events may be disabled\n"); - D_INFO(" by writing \"1\"s into disable bitmap\n"); - D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr, - array_size); - } - -} - -static int -il3945_hwrate_to_plcp_idx(u8 plcp) -{ - int idx; - - for (idx = 0; idx < RATE_COUNT_3945; idx++) - if (il3945_rates[idx].plcp == plcp) - return idx; - return -1; -} - -#ifdef CONFIG_IWLEGACY_DEBUG -#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x - -static const char * -il3945_get_tx_fail_reason(u32 status) -{ - switch (status & TX_STATUS_MSK) { - case TX_3945_STATUS_SUCCESS: - return "SUCCESS"; - TX_STATUS_ENTRY(SHORT_LIMIT); - TX_STATUS_ENTRY(LONG_LIMIT); - TX_STATUS_ENTRY(FIFO_UNDERRUN); - TX_STATUS_ENTRY(MGMNT_ABORT); - TX_STATUS_ENTRY(NEXT_FRAG); - TX_STATUS_ENTRY(LIFE_EXPIRE); - TX_STATUS_ENTRY(DEST_PS); - TX_STATUS_ENTRY(ABORTED); - TX_STATUS_ENTRY(BT_RETRY); - TX_STATUS_ENTRY(STA_INVALID); - TX_STATUS_ENTRY(FRAG_DROPPED); - TX_STATUS_ENTRY(TID_DISABLE); - TX_STATUS_ENTRY(FRAME_FLUSHED); - TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL); - TX_STATUS_ENTRY(TX_LOCKED); - TX_STATUS_ENTRY(NO_BEACON_ON_RADAR); - } - - return "UNKNOWN"; -} -#else -static inline const char * -il3945_get_tx_fail_reason(u32 status) -{ - return ""; -} -#endif - -/* - * get ieee prev rate from rate scale table. - * for A and B mode we need to overright prev - * value - */ -int -il3945_rs_next_rate(struct il_priv *il, int rate) -{ - int next_rate = il3945_get_prev_ieee_rate(rate); - - switch (il->band) { - case IEEE80211_BAND_5GHZ: - if (rate == RATE_12M_IDX) - next_rate = RATE_9M_IDX; - else if (rate == RATE_6M_IDX) - next_rate = RATE_6M_IDX; - break; - case IEEE80211_BAND_2GHZ: - if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && - il_is_associated(il)) { - if (rate == RATE_11M_IDX) - next_rate = RATE_5M_IDX; - } - break; - - default: - break; - } - - return next_rate; -} - -/** - * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd - * - * When FW advances 'R' idx, all entries between old and new 'R' idx - * need to be reclaimed. As result, some free space forms. If there is - * enough free space (> low mark), wake the stack that feeds us. - */ -static void -il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) -{ - struct il_tx_queue *txq = &il->txq[txq_id]; - struct il_queue *q = &txq->q; - struct sk_buff *skb; - - BUG_ON(txq_id == IL39_CMD_QUEUE_NUM); - - for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; - q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { - - skb = txq->skbs[txq->q.read_ptr]; - ieee80211_tx_status_irqsafe(il->hw, skb); - txq->skbs[txq->q.read_ptr] = NULL; - il->ops->txq_free_tfd(il, txq); - } - - if (il_queue_space(q) > q->low_mark && txq_id >= 0 && - txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered) - il_wake_queue(il, txq); -} - -/** - * il3945_hdl_tx - Handle Tx response - */ -static void -il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int idx = SEQ_TO_IDX(sequence); - struct il_tx_queue *txq = &il->txq[txq_id]; - struct ieee80211_tx_info *info; - struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le32_to_cpu(tx_resp->status); - int rate_idx; - int fail; - - if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { - IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " - "is out of range [0-%d] %d %d\n", txq_id, idx, - txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); - return; - } - - /* - * Firmware will not transmit frame on passive channel, if it not yet - * received some valid frame on that channel. When this error happen - * we have to wait until firmware will unblock itself i.e. when we - * note received beacon or other frame. We unblock queues in - * il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed. - */ - if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && - il->iw_mode == NL80211_IFTYPE_STATION) { - il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); - D_INFO("Stopped queues - RX waiting on passive channel\n"); - } - - txq->time_stamp = jiffies; - info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]); - ieee80211_tx_info_clear_status(info); - - /* Fill the MRR chain with some info about on-chip retransmissions */ - rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate); - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx -= IL_FIRST_OFDM_RATE; - - fail = tx_resp->failure_frame; - - info->status.rates[0].idx = rate_idx; - info->status.rates[0].count = fail + 1; /* add final attempt */ - - /* tx_status->rts_retry_count = tx_resp->failure_rts; */ - info->flags |= - ((status & TX_STATUS_MSK) == - TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0; - - D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id, - il3945_get_tx_fail_reason(status), status, tx_resp->rate, - tx_resp->failure_frame); - - D_TX_REPLY("Tx queue reclaim %d\n", idx); - il3945_tx_queue_reclaim(il, txq_id, idx); - - if (status & TX_ABORT_REQUIRED_MSK) - IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n"); -} - -/***************************************************************************** - * - * Intel PRO/Wireless 3945ABG/BG Network Connection - * - * RX handler implementations - * - *****************************************************************************/ -#ifdef CONFIG_IWLEGACY_DEBUGFS -static void -il3945_accumulative_stats(struct il_priv *il, __le32 * stats) -{ - int i; - __le32 *prev_stats; - u32 *accum_stats; - u32 *delta, *max_delta; - - prev_stats = (__le32 *) &il->_3945.stats; - accum_stats = (u32 *) &il->_3945.accum_stats; - delta = (u32 *) &il->_3945.delta_stats; - max_delta = (u32 *) &il->_3945.max_delta; - - for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats); - i += - sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, - accum_stats++) { - if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { - *delta = - (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); - *accum_stats += *delta; - if (*delta > *max_delta) - *max_delta = *delta; - } - } - - /* reset accumulative stats for "no-counter" type stats */ - il->_3945.accum_stats.general.temperature = - il->_3945.stats.general.temperature; - il->_3945.accum_stats.general.ttl_timestamp = - il->_3945.stats.general.ttl_timestamp; -} -#endif - -void -il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - - D_RX("Statistics notification received (%d vs %d).\n", - (int)sizeof(struct il3945_notif_stats), - le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); -#ifdef CONFIG_IWLEGACY_DEBUGFS - il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw); -#endif - - memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats)); -} - -void -il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - __le32 *flag = (__le32 *) &pkt->u.raw; - - if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) { -#ifdef CONFIG_IWLEGACY_DEBUGFS - memset(&il->_3945.accum_stats, 0, - sizeof(struct il3945_notif_stats)); - memset(&il->_3945.delta_stats, 0, - sizeof(struct il3945_notif_stats)); - memset(&il->_3945.max_delta, 0, - sizeof(struct il3945_notif_stats)); -#endif - D_RX("Statistics have been cleared\n"); - } - il3945_hdl_stats(il, rxb); -} - -/****************************************************************************** - * - * Misc. internal state and helper functions - * - ******************************************************************************/ - -/* This is necessary only for a number of stats, see the caller. */ -static int -il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header) -{ - /* Filter incoming packets to determine if they are targeted toward - * this network, discarding packets coming from ourselves */ - switch (il->iw_mode) { - case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */ - /* packets to our IBSS update information */ - return ether_addr_equal_64bits(header->addr3, il->bssid); - case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */ - /* packets to our IBSS update information */ - return ether_addr_equal_64bits(header->addr2, il->bssid); - default: - return 1; - } -} - -#define SMALL_PACKET_SIZE 256 - -static void -il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb, - struct ieee80211_rx_status *stats) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt); - struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); - struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); - u32 len = le16_to_cpu(rx_hdr->len); - struct sk_buff *skb; - __le16 fc = hdr->frame_control; - u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order; - - /* We received data from the HW, so stop the watchdog */ - if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) { - D_DROP("Corruption detected!\n"); - return; - } - - /* We only process data packets if the interface is open */ - if (unlikely(!il->is_open)) { - D_DROP("Dropping packet while interface is not open.\n"); - return; - } - - if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { - il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); - D_INFO("Woke queues - frame received on passive channel\n"); - } - - skb = dev_alloc_skb(SMALL_PACKET_SIZE); - if (!skb) { - IL_ERR("dev_alloc_skb failed\n"); - return; - } - - if (!il3945_mod_params.sw_crypto) - il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt, - le32_to_cpu(rx_end->status), stats); - - /* If frame is small enough to fit into skb->head, copy it - * and do not consume a full page - */ - if (len <= SMALL_PACKET_SIZE) { - memcpy(skb_put(skb, len), rx_hdr->payload, len); - } else { - skb_add_rx_frag(skb, 0, rxb->page, - (void *)rx_hdr->payload - (void *)pkt, len, - fraglen); - il->alloc_rxb_page--; - rxb->page = NULL; - } - il_update_stats(il, false, fc, len); - memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - - ieee80211_rx(il->hw, skb); -} - -#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) - -static void -il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status = {}; - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt); - struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt); - struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt); - u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg); - u16 rx_stats_noise_diff __maybe_unused = - le16_to_cpu(rx_stats->noise_diff); - u8 network_packet; - - rx_status.flag = 0; - rx_status.mactime = le64_to_cpu(rx_end->timestamp); - rx_status.band = - (rx_hdr-> - phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ : - IEEE80211_BAND_5GHZ; - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel), - rx_status.band); - - rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate); - if (rx_status.band == IEEE80211_BAND_5GHZ) - rx_status.rate_idx -= IL_FIRST_OFDM_RATE; - - rx_status.antenna = - (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> - 4; - - /* set the preamble flag if appropriate */ - if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - if ((unlikely(rx_stats->phy_count > 20))) { - D_DROP("dsp size out of range [0,20]: %d\n", - rx_stats->phy_count); - return; - } - - if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) || - !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); - return; - } - - /* Convert 3945's rssi indicator to dBm */ - rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET; - - D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal, - rx_stats_sig_avg, rx_stats_noise_diff); - - header = (struct ieee80211_hdr *)IL_RX_DATA(pkt); - - network_packet = il3945_is_network_packet(il, header); - - D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n", - network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel), - rx_status.signal, rx_status.signal, rx_status.rate_idx); - - if (network_packet) { - il->_3945.last_beacon_time = - le32_to_cpu(rx_end->beacon_timestamp); - il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp); - il->_3945.last_rx_rssi = rx_status.signal; - } - - il3945_pass_packet_to_mac80211(il, rxb, &rx_status); -} - -int -il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, - dma_addr_t addr, u16 len, u8 reset, u8 pad) -{ - int count; - struct il_queue *q; - struct il3945_tfd *tfd, *tfd_tmp; - - q = &txq->q; - tfd_tmp = (struct il3945_tfd *)txq->tfds; - tfd = &tfd_tmp[q->write_ptr]; - - if (reset) - memset(tfd, 0, sizeof(*tfd)); - - count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); - - if (count >= NUM_TFD_CHUNKS || count < 0) { - IL_ERR("Error can not send more than %d chunks\n", - NUM_TFD_CHUNKS); - return -EINVAL; - } - - tfd->tbs[count].addr = cpu_to_le32(addr); - tfd->tbs[count].len = cpu_to_le32(len); - - count++; - - tfd->control_flags = - cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad)); - - return 0; -} - -/** - * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr] - * - * Does NOT advance any idxes - */ -void -il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) -{ - struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds; - int idx = txq->q.read_ptr; - struct il3945_tfd *tfd = &tfd_tmp[idx]; - struct pci_dev *dev = il->pci_dev; - int i; - int counter; - - /* sanity check */ - counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); - if (counter > NUM_TFD_CHUNKS) { - IL_ERR("Too many chunks: %i\n", counter); - /* @todo issue fatal error, it is quite serious situation */ - return; - } - - /* Unmap tx_cmd */ - if (counter) - pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), - dma_unmap_len(&txq->meta[idx], len), - PCI_DMA_TODEVICE); - - /* unmap chunks if any */ - - for (i = 1; i < counter; i++) - pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr), - le32_to_cpu(tfd->tbs[i].len), - PCI_DMA_TODEVICE); - - /* free SKB */ - if (txq->skbs) { - struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; - - /* can be called from irqs-disabled context */ - if (skb) { - dev_kfree_skb_any(skb); - txq->skbs[txq->q.read_ptr] = NULL; - } - } -} - -/** - * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: - * -*/ -void -il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, int sta_id) -{ - u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value; - u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1); - u16 rate_mask; - int rate; - const u8 rts_retry_limit = 7; - u8 data_retry_limit; - __le32 tx_flags; - __le16 fc = hdr->frame_control; - struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload; - - rate = il3945_rates[rate_idx].plcp; - tx_flags = tx_cmd->tx_flags; - - /* We need to figure out how to get the sta->supp_rates while - * in this running context */ - rate_mask = RATES_MASK_3945; - - /* Set retry limit on DATA packets and Probe Responses */ - if (ieee80211_is_probe_resp(fc)) - data_retry_limit = 3; - else - data_retry_limit = IL_DEFAULT_TX_RETRY; - tx_cmd->data_retry_limit = data_retry_limit; - /* Set retry limit on RTS packets */ - tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); - - tx_cmd->rate = rate; - tx_cmd->tx_flags = tx_flags; - - /* OFDM */ - tx_cmd->supp_rates[0] = - ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF; - - /* CCK */ - tx_cmd->supp_rates[1] = (rate_mask & 0xF); - - D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " - "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate, - le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1], - tx_cmd->supp_rates[0]); -} - -static u8 -il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate) -{ - unsigned long flags_spin; - struct il_station_entry *station; - - if (sta_id == IL_INVALID_STATION) - return IL_INVALID_STATION; - - spin_lock_irqsave(&il->sta_lock, flags_spin); - station = &il->stations[sta_id]; - - station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; - station->sta.rate_n_flags = cpu_to_le16(tx_rate); - station->sta.mode = STA_CONTROL_MODIFY_MSK; - il_send_add_sta(il, &station->sta, CMD_ASYNC); - spin_unlock_irqrestore(&il->sta_lock, flags_spin); - - D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate); - return sta_id; -} - -static void -il3945_set_pwr_vmain(struct il_priv *il) -{ -/* - * (for documentation purposes) - * to set power to V_AUX, do - - if (pci_pme_capable(il->pci_dev, PCI_D3cold)) { - il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - - _il_poll_bit(il, CSR_GPIO_IN, - CSR_GPIO_IN_VAL_VAUX_PWR_SRC, - CSR_GPIO_IN_BIT_AUX_POWER, 5000); - } - */ - - il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); - - _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, - CSR_GPIO_IN_BIT_AUX_POWER, 5000); -} - -static int -il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq) -{ - il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma); - il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma); - il_wr(il, FH39_RCSR_WPTR(0), 0); - il_wr(il, FH39_RCSR_CONFIG(0), - FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | - FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | - FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | - FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG - << - FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) - | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 << - FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) - | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); - - /* fake read to flush all prev I/O */ - il_rd(il, FH39_RSSR_CTRL); - - return 0; -} - -static int -il3945_tx_reset(struct il_priv *il) -{ - /* bypass mode */ - il_wr_prph(il, ALM_SCD_MODE_REG, 0x2); - - /* RA 0 is active */ - il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01); - - /* all 6 fifo are active */ - il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f); - - il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000); - il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002); - il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004); - il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005); - - il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys); - - il_wr(il, FH39_TSSR_MSG_CONFIG, - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | - FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); - - return 0; -} - -/** - * il3945_txq_ctx_reset - Reset TX queue context - * - * Destroys all DMA structures and initialize them again - */ -static int -il3945_txq_ctx_reset(struct il_priv *il) -{ - int rc, txq_id; - - il3945_hw_txq_ctx_free(il); - - /* allocate tx queue structure */ - rc = il_alloc_txq_mem(il); - if (rc) - return rc; - - /* Tx CMD queue */ - rc = il3945_tx_reset(il); - if (rc) - goto error; - - /* Tx queue(s) */ - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { - rc = il_tx_queue_init(il, txq_id); - if (rc) { - IL_ERR("Tx %d queue init failed\n", txq_id); - goto error; - } - } - - return rc; - -error: - il3945_hw_txq_ctx_free(il); - return rc; -} - -/* - * Start up 3945's basic functionality after it has been reset - * (e.g. after platform boot, or shutdown via il_apm_stop()) - * NOTE: This does not load uCode nor start the embedded processor - */ -static int -il3945_apm_init(struct il_priv *il) -{ - int ret = il_apm_init(il); - - /* Clear APMG (NIC's internal power management) interrupts */ - il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0); - il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); - - /* Reset radio chip */ - il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); - - return ret; -} - -static void -il3945_nic_config(struct il_priv *il) -{ - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - unsigned long flags; - u8 rev_id = il->pci_dev->revision; - - spin_lock_irqsave(&il->lock, flags); - - /* Determine HW type */ - D_INFO("HW Revision ID = 0x%X\n", rev_id); - - if (rev_id & PCI_CFG_REV_ID_BIT_RTP) - D_INFO("RTP type\n"); - else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { - D_INFO("3945 RADIO-MB type\n"); - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_3945_MB); - } else { - D_INFO("3945 RADIO-MM type\n"); - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_3945_MM); - } - - if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) { - D_INFO("SKU OP mode is mrc\n"); - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC); - } else - D_INFO("SKU OP mode is basic\n"); - - if ((eeprom->board_revision & 0xF0) == 0xD0) { - D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); - } else { - D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision); - il_clear_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); - } - - if (eeprom->almgor_m_version <= 1) { - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); - D_INFO("Card M type A version is 0x%X\n", - eeprom->almgor_m_version); - } else { - D_INFO("Card M type B version is 0x%X\n", - eeprom->almgor_m_version); - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); - } - spin_unlock_irqrestore(&il->lock, flags); - - if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) - D_RF_KILL("SW RF KILL supported in EEPROM.\n"); - - if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) - D_RF_KILL("HW RF KILL supported in EEPROM.\n"); -} - -int -il3945_hw_nic_init(struct il_priv *il) -{ - int rc; - unsigned long flags; - struct il_rx_queue *rxq = &il->rxq; - - spin_lock_irqsave(&il->lock, flags); - il3945_apm_init(il); - spin_unlock_irqrestore(&il->lock, flags); - - il3945_set_pwr_vmain(il); - il3945_nic_config(il); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - rc = il_rx_queue_alloc(il); - if (rc) { - IL_ERR("Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - il3945_rx_queue_reset(il, rxq); - - il3945_rx_replenish(il); - - il3945_rx_init(il, rxq); - - /* Look at using this instead: - rxq->need_update = 1; - il_rx_queue_update_write_ptr(il, rxq); - */ - - il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7); - - rc = il3945_txq_ctx_reset(il); - if (rc) - return rc; - - set_bit(S_INIT, &il->status); - - return 0; -} - -/** - * il3945_hw_txq_ctx_free - Free TXQ Context - * - * Destroy all TX DMA queues and structures - */ -void -il3945_hw_txq_ctx_free(struct il_priv *il) -{ - int txq_id; - - /* Tx queues */ - if (il->txq) - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) - if (txq_id == IL39_CMD_QUEUE_NUM) - il_cmd_queue_free(il); - else - il_tx_queue_free(il, txq_id); - - /* free tx queue structure */ - il_free_txq_mem(il); -} - -void -il3945_hw_txq_ctx_stop(struct il_priv *il) -{ - int txq_id; - - /* stop SCD */ - _il_wr_prph(il, ALM_SCD_MODE_REG, 0); - _il_wr_prph(il, ALM_SCD_TXFACT_REG, 0); - - /* reset TFD queues */ - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { - _il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0); - _il_poll_bit(il, FH39_TSSR_TX_STATUS, - FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), - FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), - 1000); - } -} - -/** - * il3945_hw_reg_adjust_power_by_temp - * return idx delta into power gain settings table -*/ -static int -il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) -{ - return (new_reading - old_reading) * (-11) / 100; -} - -/** - * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range - */ -static inline int -il3945_hw_reg_temp_out_of_range(int temperature) -{ - return (temperature < -260 || temperature > 25) ? 1 : 0; -} - -int -il3945_hw_get_temperature(struct il_priv *il) -{ - return _il_rd(il, CSR_UCODE_DRV_GP2); -} - -/** - * il3945_hw_reg_txpower_get_temperature - * get the current temperature by reading from NIC -*/ -static int -il3945_hw_reg_txpower_get_temperature(struct il_priv *il) -{ - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - int temperature; - - temperature = il3945_hw_get_temperature(il); - - /* driver's okay range is -260 to +25. - * human readable okay range is 0 to +285 */ - D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT); - - /* handle insane temp reading */ - if (il3945_hw_reg_temp_out_of_range(temperature)) { - IL_ERR("Error bad temperature value %d\n", temperature); - - /* if really really hot(?), - * substitute the 3rd band/group's temp measured at factory */ - if (il->last_temperature > 100) - temperature = eeprom->groups[2].temperature; - else /* else use most recent "sane" value from driver */ - temperature = il->last_temperature; - } - - return temperature; /* raw, not "human readable" */ -} - -/* Adjust Txpower only if temperature variance is greater than threshold. - * - * Both are lower than older versions' 9 degrees */ -#define IL_TEMPERATURE_LIMIT_TIMER 6 - -/** - * il3945_is_temp_calib_needed - determines if new calibration is needed - * - * records new temperature in tx_mgr->temperature. - * replaces tx_mgr->last_temperature *only* if calib needed - * (assumes caller will actually do the calibration!). */ -static int -il3945_is_temp_calib_needed(struct il_priv *il) -{ - int temp_diff; - - il->temperature = il3945_hw_reg_txpower_get_temperature(il); - temp_diff = il->temperature - il->last_temperature; - - /* get absolute value */ - if (temp_diff < 0) { - D_POWER("Getting cooler, delta %d,\n", temp_diff); - temp_diff = -temp_diff; - } else if (temp_diff == 0) - D_POWER("Same temp,\n"); - else - D_POWER("Getting warmer, delta %d,\n", temp_diff); - - /* if we don't need calibration, *don't* update last_temperature */ - if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) { - D_POWER("Timed thermal calib not needed\n"); - return 0; - } - - D_POWER("Timed thermal calib needed\n"); - - /* assume that caller will actually do calib ... - * update the "last temperature" value */ - il->last_temperature = il->temperature; - return 1; -} - -#define IL_MAX_GAIN_ENTRIES 78 -#define IL_CCK_FROM_OFDM_POWER_DIFF -5 -#define IL_CCK_FROM_OFDM_IDX_DIFF (10) - -/* radio and DSP power table, each step is 1/2 dB. - * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ -static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = { - { - {251, 127}, /* 2.4 GHz, highest power */ - {251, 127}, - {251, 127}, - {251, 127}, - {251, 125}, - {251, 110}, - {251, 105}, - {251, 98}, - {187, 125}, - {187, 115}, - {187, 108}, - {187, 99}, - {243, 119}, - {243, 111}, - {243, 105}, - {243, 97}, - {243, 92}, - {211, 106}, - {211, 100}, - {179, 120}, - {179, 113}, - {179, 107}, - {147, 125}, - {147, 119}, - {147, 112}, - {147, 106}, - {147, 101}, - {147, 97}, - {147, 91}, - {115, 107}, - {235, 121}, - {235, 115}, - {235, 109}, - {203, 127}, - {203, 121}, - {203, 115}, - {203, 108}, - {203, 102}, - {203, 96}, - {203, 92}, - {171, 110}, - {171, 104}, - {171, 98}, - {139, 116}, - {227, 125}, - {227, 119}, - {227, 113}, - {227, 107}, - {227, 101}, - {227, 96}, - {195, 113}, - {195, 106}, - {195, 102}, - {195, 95}, - {163, 113}, - {163, 106}, - {163, 102}, - {163, 95}, - {131, 113}, - {131, 106}, - {131, 102}, - {131, 95}, - {99, 113}, - {99, 106}, - {99, 102}, - {99, 95}, - {67, 113}, - {67, 106}, - {67, 102}, - {67, 95}, - {35, 113}, - {35, 106}, - {35, 102}, - {35, 95}, - {3, 113}, - {3, 106}, - {3, 102}, - {3, 95} /* 2.4 GHz, lowest power */ - }, - { - {251, 127}, /* 5.x GHz, highest power */ - {251, 120}, - {251, 114}, - {219, 119}, - {219, 101}, - {187, 113}, - {187, 102}, - {155, 114}, - {155, 103}, - {123, 117}, - {123, 107}, - {123, 99}, - {123, 92}, - {91, 108}, - {59, 125}, - {59, 118}, - {59, 109}, - {59, 102}, - {59, 96}, - {59, 90}, - {27, 104}, - {27, 98}, - {27, 92}, - {115, 118}, - {115, 111}, - {115, 104}, - {83, 126}, - {83, 121}, - {83, 113}, - {83, 105}, - {83, 99}, - {51, 118}, - {51, 111}, - {51, 104}, - {51, 98}, - {19, 116}, - {19, 109}, - {19, 102}, - {19, 98}, - {19, 93}, - {171, 113}, - {171, 107}, - {171, 99}, - {139, 120}, - {139, 113}, - {139, 107}, - {139, 99}, - {107, 120}, - {107, 113}, - {107, 107}, - {107, 99}, - {75, 120}, - {75, 113}, - {75, 107}, - {75, 99}, - {43, 120}, - {43, 113}, - {43, 107}, - {43, 99}, - {11, 120}, - {11, 113}, - {11, 107}, - {11, 99}, - {131, 107}, - {131, 99}, - {99, 120}, - {99, 113}, - {99, 107}, - {99, 99}, - {67, 120}, - {67, 113}, - {67, 107}, - {67, 99}, - {35, 120}, - {35, 113}, - {35, 107}, - {35, 99}, - {3, 120} /* 5.x GHz, lowest power */ - } -}; - -static inline u8 -il3945_hw_reg_fix_power_idx(int idx) -{ - if (idx < 0) - return 0; - if (idx >= IL_MAX_GAIN_ENTRIES) - return IL_MAX_GAIN_ENTRIES - 1; - return (u8) idx; -} - -/* Kick off thermal recalibration check every 60 seconds */ -#define REG_RECALIB_PERIOD (60) - -/** - * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests - * - * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) - * or 6 Mbit (OFDM) rates. - */ -static void -il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx, - const s8 *clip_pwrs, - struct il_channel_info *ch_info, int band_idx) -{ - struct il3945_scan_power_info *scan_power_info; - s8 power; - u8 power_idx; - - scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx]; - - /* use this channel group's 6Mbit clipping/saturation pwr, - * but cap at regulatory scan power restriction (set during init - * based on eeprom channel data) for this channel. */ - power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]); - - power = min(power, il->tx_power_user_lmt); - scan_power_info->requested_power = power; - - /* find difference between new scan *power* and current "normal" - * Tx *power* for 6Mb. Use this difference (x2) to adjust the - * current "normal" temperature-compensated Tx power *idx* for - * this rate (1Mb or 6Mb) to yield new temp-compensated scan power - * *idx*. */ - power_idx = - ch_info->power_info[rate_idx].power_table_idx - (power - - ch_info-> - power_info - [RATE_6M_IDX_TBL]. - requested_power) * - 2; - - /* store reference idx that we use when adjusting *all* scan - * powers. So we can accommodate user (all channel) or spectrum - * management (single channel) power changes "between" temperature - * feedback compensation procedures. - * don't force fit this reference idx into gain table; it may be a - * negative number. This will help avoid errors when we're at - * the lower bounds (highest gains, for warmest temperatures) - * of the table. */ - - /* don't exceed table bounds for "real" setting */ - power_idx = il3945_hw_reg_fix_power_idx(power_idx); - - scan_power_info->power_table_idx = power_idx; - scan_power_info->tpc.tx_gain = - power_gain_table[band_idx][power_idx].tx_gain; - scan_power_info->tpc.dsp_atten = - power_gain_table[band_idx][power_idx].dsp_atten; -} - -/** - * il3945_send_tx_power - fill in Tx Power command with gain settings - * - * Configures power settings for all rates for the current channel, - * using values from channel info struct, and send to NIC - */ -static int -il3945_send_tx_power(struct il_priv *il) -{ - int rate_idx, i; - const struct il_channel_info *ch_info = NULL; - struct il3945_txpowertable_cmd txpower = { - .channel = il->active.channel, - }; - u16 chan; - - if (WARN_ONCE - (test_bit(S_SCAN_HW, &il->status), - "TX Power requested while scanning!\n")) - return -EAGAIN; - - chan = le16_to_cpu(il->active.channel); - - txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1; - ch_info = il_get_channel_info(il, il->band, chan); - if (!ch_info) { - IL_ERR("Failed to get channel info for channel %d [%d]\n", chan, - il->band); - return -EINVAL; - } - - if (!il_is_channel_valid(ch_info)) { - D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n"); - return 0; - } - - /* fill cmd with power settings for all rates for current channel */ - /* Fill OFDM rate */ - for (rate_idx = IL_FIRST_OFDM_RATE, i = 0; - rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) { - - txpower.power[i].tpc = ch_info->power_info[i].tpc; - txpower.power[i].rate = il3945_rates[rate_idx].plcp; - - D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", - le16_to_cpu(txpower.channel), txpower.band, - txpower.power[i].tpc.tx_gain, - txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); - } - /* Fill CCK rates */ - for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE; - rate_idx++, i++) { - txpower.power[i].tpc = ch_info->power_info[i].tpc; - txpower.power[i].rate = il3945_rates[rate_idx].plcp; - - D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", - le16_to_cpu(txpower.channel), txpower.band, - txpower.power[i].tpc.tx_gain, - txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); - } - - return il_send_cmd_pdu(il, C_TX_PWR_TBL, - sizeof(struct il3945_txpowertable_cmd), - &txpower); - -} - -/** - * il3945_hw_reg_set_new_power - Configures power tables at new levels - * @ch_info: Channel to update. Uses power_info.requested_power. - * - * Replace requested_power and base_power_idx ch_info fields for - * one channel. - * - * Called if user or spectrum management changes power preferences. - * Takes into account h/w and modulation limitations (clip power). - * - * This does *not* send anything to NIC, just sets up ch_info for one channel. - * - * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to - * properly fill out the scan powers, and actual h/w gain settings, - * and send changes to NIC - */ -static int -il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info) -{ - struct il3945_channel_power_info *power_info; - int power_changed = 0; - int i; - const s8 *clip_pwrs; - int power; - - /* Get this chnlgrp's rate-to-max/clip-powers table */ - clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers; - - /* Get this channel's rate-to-current-power settings table */ - power_info = ch_info->power_info; - - /* update OFDM Txpower settings */ - for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) { - int delta_idx; - - /* limit new power to be no more than h/w capability */ - power = min(ch_info->curr_txpow, clip_pwrs[i]); - if (power == power_info->requested_power) - continue; - - /* find difference between old and new requested powers, - * update base (non-temp-compensated) power idx */ - delta_idx = (power - power_info->requested_power) * 2; - power_info->base_power_idx -= delta_idx; - - /* save new requested power value */ - power_info->requested_power = power; - - power_changed = 1; - } - - /* update CCK Txpower settings, based on OFDM 12M setting ... - * ... all CCK power settings for a given channel are the *same*. */ - if (power_changed) { - power = - ch_info->power_info[RATE_12M_IDX_TBL].requested_power + - IL_CCK_FROM_OFDM_POWER_DIFF; - - /* do all CCK rates' il3945_channel_power_info structures */ - for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) { - power_info->requested_power = power; - power_info->base_power_idx = - ch_info->power_info[RATE_12M_IDX_TBL]. - base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; - ++power_info; - } - } - - return 0; -} - -/** - * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel - * - * NOTE: Returned power limit may be less (but not more) than requested, - * based strictly on regulatory (eeprom and spectrum mgt) limitations - * (no consideration for h/w clipping limitations). - */ -static int -il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info) -{ - s8 max_power; - -#if 0 - /* if we're using TGd limits, use lower of TGd or EEPROM */ - if (ch_info->tgd_data.max_power != 0) - max_power = - min(ch_info->tgd_data.max_power, - ch_info->eeprom.max_power_avg); - - /* else just use EEPROM limits */ - else -#endif - max_power = ch_info->eeprom.max_power_avg; - - return min(max_power, ch_info->max_power_avg); -} - -/** - * il3945_hw_reg_comp_txpower_temp - Compensate for temperature - * - * Compensate txpower settings of *all* channels for temperature. - * This only accounts for the difference between current temperature - * and the factory calibration temperatures, and bases the new settings - * on the channel's base_power_idx. - * - * If RxOn is "associated", this sends the new Txpower to NIC! - */ -static int -il3945_hw_reg_comp_txpower_temp(struct il_priv *il) -{ - struct il_channel_info *ch_info = NULL; - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - int delta_idx; - const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ - u8 a_band; - u8 rate_idx; - u8 scan_tbl_idx; - u8 i; - int ref_temp; - int temperature = il->temperature; - - if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) { - /* do not perform tx power calibration */ - return 0; - } - /* set up new Tx power info for each and every channel, 2.4 and 5.x */ - for (i = 0; i < il->channel_count; i++) { - ch_info = &il->channel_info[i]; - a_band = il_is_channel_a_band(ch_info); - - /* Get this chnlgrp's factory calibration temperature */ - ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature; - - /* get power idx adjustment based on current and factory - * temps */ - delta_idx = - il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp); - - /* set tx power value for all rates, OFDM and CCK */ - for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) { - int power_idx = - ch_info->power_info[rate_idx].base_power_idx; - - /* temperature compensate */ - power_idx += delta_idx; - - /* stay within table range */ - power_idx = il3945_hw_reg_fix_power_idx(power_idx); - ch_info->power_info[rate_idx].power_table_idx = - (u8) power_idx; - ch_info->power_info[rate_idx].tpc = - power_gain_table[a_band][power_idx]; - } - - /* Get this chnlgrp's rate-to-max/clip-powers table */ - clip_pwrs = - il->_3945.clip_groups[ch_info->group_idx].clip_powers; - - /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ - for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; - scan_tbl_idx++) { - s32 actual_idx = - (scan_tbl_idx == - 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; - il3945_hw_reg_set_scan_power(il, scan_tbl_idx, - actual_idx, clip_pwrs, - ch_info, a_band); - } - } - - /* send Txpower command for current channel to ucode */ - return il->ops->send_tx_power(il); -} - -int -il3945_hw_reg_set_txpower(struct il_priv *il, s8 power) -{ - struct il_channel_info *ch_info; - s8 max_power; - u8 a_band; - u8 i; - - if (il->tx_power_user_lmt == power) { - D_POWER("Requested Tx power same as current " "limit: %ddBm.\n", - power); - return 0; - } - - D_POWER("Setting upper limit clamp to %ddBm.\n", power); - il->tx_power_user_lmt = power; - - /* set up new Tx powers for each and every channel, 2.4 and 5.x */ - - for (i = 0; i < il->channel_count; i++) { - ch_info = &il->channel_info[i]; - a_band = il_is_channel_a_band(ch_info); - - /* find minimum power of all user and regulatory constraints - * (does not consider h/w clipping limitations) */ - max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info); - max_power = min(power, max_power); - if (max_power != ch_info->curr_txpow) { - ch_info->curr_txpow = max_power; - - /* this considers the h/w clipping limitations */ - il3945_hw_reg_set_new_power(il, ch_info); - } - } - - /* update txpower settings for all channels, - * send to NIC if associated. */ - il3945_is_temp_calib_needed(il); - il3945_hw_reg_comp_txpower_temp(il); - - return 0; -} - -static int -il3945_send_rxon_assoc(struct il_priv *il) -{ - int rc = 0; - struct il_rx_pkt *pkt; - struct il3945_rxon_assoc_cmd rxon_assoc; - struct il_host_cmd cmd = { - .id = C_RXON_ASSOC, - .len = sizeof(rxon_assoc), - .flags = CMD_WANT_SKB, - .data = &rxon_assoc, - }; - const struct il_rxon_cmd *rxon1 = &il->staging; - const struct il_rxon_cmd *rxon2 = &il->active; - - if (rxon1->flags == rxon2->flags && - rxon1->filter_flags == rxon2->filter_flags && - rxon1->cck_basic_rates == rxon2->cck_basic_rates && - rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) { - D_INFO("Using current RXON_ASSOC. Not resending.\n"); - return 0; - } - - rxon_assoc.flags = il->staging.flags; - rxon_assoc.filter_flags = il->staging.filter_flags; - rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates; - rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates; - rxon_assoc.reserved = 0; - - rc = il_send_cmd_sync(il, &cmd); - if (rc) - return rc; - - pkt = (struct il_rx_pkt *)cmd.reply_page; - if (pkt->hdr.flags & IL_CMD_FAILED_MSK) { - IL_ERR("Bad return from C_RXON_ASSOC command\n"); - rc = -EIO; - } - - il_free_pages(il, cmd.reply_page); - - return rc; -} - -/** - * il3945_commit_rxon - commit staging_rxon to hardware - * - * The RXON command in staging_rxon is committed to the hardware and - * the active_rxon structure is updated with the new data. This - * function correctly transitions out of the RXON_ASSOC_MSK state if - * a HW tune is required based on the RXON structure changes. - */ -int -il3945_commit_rxon(struct il_priv *il) -{ - /* cast away the const for active_rxon in this function */ - struct il3945_rxon_cmd *active_rxon = (void *)&il->active; - struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging; - int rc = 0; - bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK); - - if (test_bit(S_EXIT_PENDING, &il->status)) - return -EINVAL; - - if (!il_is_alive(il)) - return -1; - - /* always get timestamp with Rx frame */ - staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK; - - /* select antenna */ - staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK); - staging_rxon->flags |= il3945_get_antenna_flags(il); - - rc = il_check_rxon_cmd(il); - if (rc) { - IL_ERR("Invalid RXON configuration. Not committing.\n"); - return -EINVAL; - } - - /* If we don't need to send a full RXON, we can use - * il3945_rxon_assoc_cmd which is used to reconfigure filter - * and other flags for the current radio configuration. */ - if (!il_full_rxon_required(il)) { - rc = il_send_rxon_assoc(il); - if (rc) { - IL_ERR("Error setting RXON_ASSOC " - "configuration (%d).\n", rc); - return rc; - } - - memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); - /* - * We do not commit tx power settings while channel changing, - * do it now if tx power changed. - */ - il_set_tx_power(il, il->tx_power_next, false); - return 0; - } - - /* If we are currently associated and the new config requires - * an RXON_ASSOC and the new config wants the associated mask enabled, - * we must clear the associated from the active configuration - * before we apply the new config */ - if (il_is_associated(il) && new_assoc) { - D_INFO("Toggling associated bit on current RXON\n"); - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - /* - * reserved4 and 5 could have been filled by the iwlcore code. - * Let's clear them before pushing to the 3945. - */ - active_rxon->reserved4 = 0; - active_rxon->reserved5 = 0; - rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), - &il->active); - - /* If the mask clearing failed then we set - * active_rxon back to what it was previously */ - if (rc) { - active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK; - IL_ERR("Error clearing ASSOC_MSK on current " - "configuration (%d).\n", rc); - return rc; - } - il_clear_ucode_stations(il); - il_restore_stations(il); - } - - D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n" - "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"), - le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr); - - /* - * reserved4 and 5 could have been filled by the iwlcore code. - * Let's clear them before pushing to the 3945. - */ - staging_rxon->reserved4 = 0; - staging_rxon->reserved5 = 0; - - il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto); - - /* Apply the new configuration */ - rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd), - staging_rxon); - if (rc) { - IL_ERR("Error setting new configuration (%d).\n", rc); - return rc; - } - - memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); - - if (!new_assoc) { - il_clear_ucode_stations(il); - il_restore_stations(il); - } - - /* If we issue a new RXON command which required a tune then we must - * send a new TXPOWER command or we won't be able to Tx any frames */ - rc = il_set_tx_power(il, il->tx_power_next, true); - if (rc) { - IL_ERR("Error setting Tx power (%d).\n", rc); - return rc; - } - - /* Init the hardware's rate fallback order based on the band */ - rc = il3945_init_hw_rate_table(il); - if (rc) { - IL_ERR("Error setting HW rate table: %02X\n", rc); - return -EIO; - } - - return 0; -} - -/** - * il3945_reg_txpower_periodic - called when time to check our temperature. - * - * -- reset periodic timer - * -- see if temp has changed enough to warrant re-calibration ... if so: - * -- correct coeffs for temp (can reset temp timer) - * -- save this temp as "last", - * -- send new set of gain settings to NIC - * NOTE: This should continue working, even when we're not associated, - * so we can keep our internal table of scan powers current. */ -void -il3945_reg_txpower_periodic(struct il_priv *il) -{ - /* This will kick in the "brute force" - * il3945_hw_reg_comp_txpower_temp() below */ - if (!il3945_is_temp_calib_needed(il)) - goto reschedule; - - /* Set up a new set of temp-adjusted TxPowers, send to NIC. - * This is based *only* on current temperature, - * ignoring any previous power measurements */ - il3945_hw_reg_comp_txpower_temp(il); - -reschedule: - queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic, - REG_RECALIB_PERIOD * HZ); -} - -static void -il3945_bg_reg_txpower_periodic(struct work_struct *work) -{ - struct il_priv *il = container_of(work, struct il_priv, - _3945.thermal_periodic.work); - - mutex_lock(&il->mutex); - if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL) - goto out; - - il3945_reg_txpower_periodic(il); -out: - mutex_unlock(&il->mutex); -} - -/** - * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel. - * - * This function is used when initializing channel-info structs. - * - * NOTE: These channel groups do *NOT* match the bands above! - * These channel groups are based on factory-tested channels; - * on A-band, EEPROM's "group frequency" entries represent the top - * channel in each group 1-4. Group 5 All B/G channels are in group 0. - */ -static u16 -il3945_hw_reg_get_ch_grp_idx(struct il_priv *il, - const struct il_channel_info *ch_info) -{ - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0]; - u8 group; - u16 group_idx = 0; /* based on factory calib frequencies */ - u8 grp_channel; - - /* Find the group idx for the channel ... don't use idx 1(?) */ - if (il_is_channel_a_band(ch_info)) { - for (group = 1; group < 5; group++) { - grp_channel = ch_grp[group].group_channel; - if (ch_info->channel <= grp_channel) { - group_idx = group; - break; - } - } - /* group 4 has a few channels *above* its factory cal freq */ - if (group == 5) - group_idx = 4; - } else - group_idx = 0; /* 2.4 GHz, group 0 */ - - D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx); - return group_idx; -} - -/** - * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx - * - * Interpolate to get nominal (i.e. at factory calibration temperature) idx - * into radio/DSP gain settings table for requested power. - */ -static int -il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power, - s32 setting_idx, s32 *new_idx) -{ - const struct il3945_eeprom_txpower_group *chnl_grp = NULL; - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - s32 idx0, idx1; - s32 power = 2 * requested_power; - s32 i; - const struct il3945_eeprom_txpower_sample *samples; - s32 gains0, gains1; - s32 res; - s32 denominator; - - chnl_grp = &eeprom->groups[setting_idx]; - samples = chnl_grp->samples; - for (i = 0; i < 5; i++) { - if (power == samples[i].power) { - *new_idx = samples[i].gain_idx; - return 0; - } - } - - if (power > samples[1].power) { - idx0 = 0; - idx1 = 1; - } else if (power > samples[2].power) { - idx0 = 1; - idx1 = 2; - } else if (power > samples[3].power) { - idx0 = 2; - idx1 = 3; - } else { - idx0 = 3; - idx1 = 4; - } - - denominator = (s32) samples[idx1].power - (s32) samples[idx0].power; - if (denominator == 0) - return -EINVAL; - gains0 = (s32) samples[idx0].gain_idx * (1 << 19); - gains1 = (s32) samples[idx1].gain_idx * (1 << 19); - res = - gains0 + (gains1 - gains0) * ((s32) power - - (s32) samples[idx0].power) / - denominator + (1 << 18); - *new_idx = res >> 19; - return 0; -} - -static void -il3945_hw_reg_init_channel_groups(struct il_priv *il) -{ - u32 i; - s32 rate_idx; - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - const struct il3945_eeprom_txpower_group *group; - - D_POWER("Initializing factory calib info from EEPROM\n"); - - for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) { - s8 *clip_pwrs; /* table of power levels for each rate */ - s8 satur_pwr; /* saturation power for each chnl group */ - group = &eeprom->groups[i]; - - /* sanity check on factory saturation power value */ - if (group->saturation_power < 40) { - IL_WARN("Error: saturation power is %d, " - "less than minimum expected 40\n", - group->saturation_power); - return; - } - - /* - * Derive requested power levels for each rate, based on - * hardware capabilities (saturation power for band). - * Basic value is 3dB down from saturation, with further - * power reductions for highest 3 data rates. These - * backoffs provide headroom for high rate modulation - * power peaks, without too much distortion (clipping). - */ - /* we'll fill in this array with h/w max power levels */ - clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers; - - /* divide factory saturation power by 2 to find -3dB level */ - satur_pwr = (s8) (group->saturation_power >> 1); - - /* fill in channel group's nominal powers for each rate */ - for (rate_idx = 0; rate_idx < RATE_COUNT_3945; - rate_idx++, clip_pwrs++) { - switch (rate_idx) { - case RATE_36M_IDX_TBL: - if (i == 0) /* B/G */ - *clip_pwrs = satur_pwr; - else /* A */ - *clip_pwrs = satur_pwr - 5; - break; - case RATE_48M_IDX_TBL: - if (i == 0) - *clip_pwrs = satur_pwr - 7; - else - *clip_pwrs = satur_pwr - 10; - break; - case RATE_54M_IDX_TBL: - if (i == 0) - *clip_pwrs = satur_pwr - 9; - else - *clip_pwrs = satur_pwr - 12; - break; - default: - *clip_pwrs = satur_pwr; - break; - } - } - } -} - -/** - * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM - * - * Second pass (during init) to set up il->channel_info - * - * Set up Tx-power settings in our channel info database for each VALID - * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values - * and current temperature. - * - * Since this is based on current temperature (at init time), these values may - * not be valid for very long, but it gives us a starting/default point, - * and allows us to active (i.e. using Tx) scan. - * - * This does *not* write values to NIC, just sets up our internal table. - */ -int -il3945_txpower_set_from_eeprom(struct il_priv *il) -{ - struct il_channel_info *ch_info = NULL; - struct il3945_channel_power_info *pwr_info; - struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom; - int delta_idx; - u8 rate_idx; - u8 scan_tbl_idx; - const s8 *clip_pwrs; /* array of power levels for each rate */ - u8 gain, dsp_atten; - s8 power; - u8 pwr_idx, base_pwr_idx, a_band; - u8 i; - int temperature; - - /* save temperature reference, - * so we can determine next time to calibrate */ - temperature = il3945_hw_reg_txpower_get_temperature(il); - il->last_temperature = temperature; - - il3945_hw_reg_init_channel_groups(il); - - /* initialize Tx power info for each and every channel, 2.4 and 5.x */ - for (i = 0, ch_info = il->channel_info; i < il->channel_count; - i++, ch_info++) { - a_band = il_is_channel_a_band(ch_info); - if (!il_is_channel_valid(ch_info)) - continue; - - /* find this channel's channel group (*not* "band") idx */ - ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info); - - /* Get this chnlgrp's rate->max/clip-powers table */ - clip_pwrs = - il->_3945.clip_groups[ch_info->group_idx].clip_powers; - - /* calculate power idx *adjustment* value according to - * diff between current temperature and factory temperature */ - delta_idx = - il3945_hw_reg_adjust_power_by_temp(temperature, - eeprom->groups[ch_info-> - group_idx]. - temperature); - - D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel, - delta_idx, temperature + IL_TEMP_CONVERT); - - /* set tx power value for all OFDM rates */ - for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) { - s32 uninitialized_var(power_idx); - int rc; - - /* use channel group's clip-power table, - * but don't exceed channel's max power */ - s8 pwr = min(ch_info->max_power_avg, - clip_pwrs[rate_idx]); - - pwr_info = &ch_info->power_info[rate_idx]; - - /* get base (i.e. at factory-measured temperature) - * power table idx for this rate's power */ - rc = il3945_hw_reg_get_matched_power_idx(il, pwr, - ch_info-> - group_idx, - &power_idx); - if (rc) { - IL_ERR("Invalid power idx\n"); - return rc; - } - pwr_info->base_power_idx = (u8) power_idx; - - /* temperature compensate */ - power_idx += delta_idx; - - /* stay within range of gain table */ - power_idx = il3945_hw_reg_fix_power_idx(power_idx); - - /* fill 1 OFDM rate's il3945_channel_power_info struct */ - pwr_info->requested_power = pwr; - pwr_info->power_table_idx = (u8) power_idx; - pwr_info->tpc.tx_gain = - power_gain_table[a_band][power_idx].tx_gain; - pwr_info->tpc.dsp_atten = - power_gain_table[a_band][power_idx].dsp_atten; - } - - /* set tx power for CCK rates, based on OFDM 12 Mbit settings */ - pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL]; - power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF; - pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF; - base_pwr_idx = - pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF; - - /* stay within table range */ - pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx); - gain = power_gain_table[a_band][pwr_idx].tx_gain; - dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten; - - /* fill each CCK rate's il3945_channel_power_info structure - * NOTE: All CCK-rate Txpwrs are the same for a given chnl! - * NOTE: CCK rates start at end of OFDM rates! */ - for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) { - pwr_info = - &ch_info->power_info[rate_idx + IL_OFDM_RATES]; - pwr_info->requested_power = power; - pwr_info->power_table_idx = pwr_idx; - pwr_info->base_power_idx = base_pwr_idx; - pwr_info->tpc.tx_gain = gain; - pwr_info->tpc.dsp_atten = dsp_atten; - } - - /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ - for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES; - scan_tbl_idx++) { - s32 actual_idx = - (scan_tbl_idx == - 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL; - il3945_hw_reg_set_scan_power(il, scan_tbl_idx, - actual_idx, clip_pwrs, - ch_info, a_band); - } - } - - return 0; -} - -int -il3945_hw_rxq_stop(struct il_priv *il) -{ - int ret; - - _il_wr(il, FH39_RCSR_CONFIG(0), 0); - ret = _il_poll_bit(il, FH39_RSSR_STATUS, - FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, - FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, - 1000); - if (ret < 0) - IL_ERR("Can't stop Rx DMA.\n"); - - return 0; -} - -int -il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) -{ - int txq_id = txq->q.id; - - struct il3945_shared *shared_data = il->_3945.shared_virt; - - shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr); - - il_wr(il, FH39_CBCC_CTRL(txq_id), 0); - il_wr(il, FH39_CBCC_BASE(txq_id), 0); - - il_wr(il, FH39_TCSR_CONFIG(txq_id), - FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | - FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | - FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | - FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | - FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); - - /* fake read to flush all prev. writes */ - _il_rd(il, FH39_TSSR_CBB_BASE); - - return 0; -} - -/* - * HCMD utils - */ -static u16 -il3945_get_hcmd_size(u8 cmd_id, u16 len) -{ - switch (cmd_id) { - case C_RXON: - return sizeof(struct il3945_rxon_cmd); - case C_POWER_TBL: - return sizeof(struct il3945_powertable_cmd); - default: - return len; - } -} - -static u16 -il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data) -{ - struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data; - addsta->mode = cmd->mode; - memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify)); - memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo)); - addsta->station_flags = cmd->station_flags; - addsta->station_flags_msk = cmd->station_flags_msk; - addsta->tid_disable_tx = cpu_to_le16(0); - addsta->rate_n_flags = cmd->rate_n_flags; - addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid; - addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid; - addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn; - - return (u16) sizeof(struct il3945_addsta_cmd); -} - -static int -il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r) -{ - int ret; - u8 sta_id; - unsigned long flags; - - if (sta_id_r) - *sta_id_r = IL_INVALID_STATION; - - ret = il_add_station_common(il, addr, 0, NULL, &sta_id); - if (ret) { - IL_ERR("Unable to add station %pM\n", addr); - return ret; - } - - if (sta_id_r) - *sta_id_r = sta_id; - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].used |= IL_STA_LOCAL; - spin_unlock_irqrestore(&il->sta_lock, flags); - - return 0; -} - -static int -il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, - bool add) -{ - struct il_vif_priv *vif_priv = (void *)vif->drv_priv; - int ret; - - if (add) { - ret = - il3945_add_bssid_station(il, vif->bss_conf.bssid, - &vif_priv->ibss_bssid_sta_id); - if (ret) - return ret; - - il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id, - (il->band == - IEEE80211_BAND_5GHZ) ? RATE_6M_PLCP : - RATE_1M_PLCP); - il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id); - - return 0; - } - - return il_remove_station(il, vif_priv->ibss_bssid_sta_id, - vif->bss_conf.bssid); -} - -/** - * il3945_init_hw_rate_table - Initialize the hardware rate fallback table - */ -int -il3945_init_hw_rate_table(struct il_priv *il) -{ - int rc, i, idx, prev_idx; - struct il3945_rate_scaling_cmd rate_cmd = { - .reserved = {0, 0, 0}, - }; - struct il3945_rate_scaling_info *table = rate_cmd.table; - - for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) { - idx = il3945_rates[i].table_rs_idx; - - table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp); - table[idx].try_cnt = il->retry_rate; - prev_idx = il3945_get_prev_ieee_rate(i); - table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx; - } - - switch (il->band) { - case IEEE80211_BAND_5GHZ: - D_RATE("Select A mode rate scale\n"); - /* If one of the following CCK rates is used, - * have it fall back to the 6M OFDM rate */ - for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) - table[i].next_rate_idx = - il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; - - /* Don't fall back to CCK rates */ - table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL; - - /* Don't drop out of OFDM rates */ - table[RATE_6M_IDX_TBL].next_rate_idx = - il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx; - break; - - case IEEE80211_BAND_2GHZ: - D_RATE("Select B/G mode rate scale\n"); - /* If an OFDM rate is used, have it fall back to the - * 1M CCK rates */ - - if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) && - il_is_associated(il)) { - - idx = IL_FIRST_CCK_RATE; - for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++) - table[i].next_rate_idx = - il3945_rates[idx].table_rs_idx; - - idx = RATE_11M_IDX_TBL; - /* CCK shouldn't fall back to OFDM... */ - table[idx].next_rate_idx = RATE_5M_IDX_TBL; - } - break; - - default: - WARN_ON(1); - break; - } - - /* Update the rate scaling for control frame Tx */ - rate_cmd.table_id = 0; - rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); - if (rc) - return rc; - - /* Update the rate scaling for data frame Tx */ - rate_cmd.table_id = 1; - return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); -} - -/* Called when initializing driver */ -int -il3945_hw_set_hw_params(struct il_priv *il) -{ - memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params)); - - il->_3945.shared_virt = - dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared), - &il->_3945.shared_phys, GFP_KERNEL); - if (!il->_3945.shared_virt) - return -ENOMEM; - - il->hw_params.bcast_id = IL3945_BROADCAST_ID; - - /* Assign number of Usable TX queues */ - il->hw_params.max_txq_num = il->cfg->num_of_queues; - - il->hw_params.tfd_size = sizeof(struct il3945_tfd); - il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K); - il->hw_params.max_rxq_size = RX_QUEUE_SIZE; - il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; - il->hw_params.max_stations = IL3945_STATION_COUNT; - - il->sta_key_max_num = STA_KEY_MAX_NUM; - - il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR; - il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL; - il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS; - - return 0; -} - -unsigned int -il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame, - u8 rate) -{ - struct il3945_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = - il3945_fill_beacon_frame(il, tx_beacon_cmd->frame, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); - - tx_beacon_cmd->tx.rate = rate; - tx_beacon_cmd->tx.tx_flags = - (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK); - - /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */ - tx_beacon_cmd->tx.supp_rates[0] = - (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF; - - tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF); - - return sizeof(struct il3945_tx_beacon_cmd) + frame_size; -} - -void -il3945_hw_handler_setup(struct il_priv *il) -{ - il->handlers[C_TX] = il3945_hdl_tx; - il->handlers[N_3945_RX] = il3945_hdl_rx; -} - -void -il3945_hw_setup_deferred_work(struct il_priv *il) -{ - INIT_DELAYED_WORK(&il->_3945.thermal_periodic, - il3945_bg_reg_txpower_periodic); -} - -void -il3945_hw_cancel_deferred_work(struct il_priv *il) -{ - cancel_delayed_work(&il->_3945.thermal_periodic); -} - -/* check contents of special bootstrap uCode SRAM */ -static int -il3945_verify_bsm(struct il_priv *il) -{ - __le32 *image = il->ucode_boot.v_addr; - u32 len = il->ucode_boot.len; - u32 reg; - u32 val; - - D_INFO("Begin verify bsm\n"); - - /* verify BSM SRAM contents */ - val = il_rd_prph(il, BSM_WR_DWCOUNT_REG); - for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image++) { - val = il_rd_prph(il, reg); - if (val != le32_to_cpu(*image)) { - IL_ERR("BSM uCode verification failed at " - "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n", - BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND, - len, val, le32_to_cpu(*image)); - return -EIO; - } - } - - D_INFO("BSM bootstrap uCode image OK\n"); - - return 0; -} - -/****************************************************************************** - * - * EEPROM related functions - * - ******************************************************************************/ - -/* - * Clear the OWNER_MSK, to establish driver (instead of uCode running on - * embedded controller) as EEPROM reader; each read is a series of pulses - * to/from the EEPROM chip, not a single event, so even reads could conflict - * if they weren't arbitrated by some ownership mechanism. Here, the driver - * simply claims ownership, which should be safe when this function is called - * (i.e. before loading uCode!). - */ -static int -il3945_eeprom_acquire_semaphore(struct il_priv *il) -{ - _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); - return 0; -} - -static void -il3945_eeprom_release_semaphore(struct il_priv *il) -{ - return; -} - - /** - * il3945_load_bsm - Load bootstrap instructions - * - * BSM operation: - * - * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program - * in special SRAM that does not power down during RFKILL. When powering back - * up after power-saving sleeps (or during initial uCode load), the BSM loads - * the bootstrap program into the on-board processor, and starts it. - * - * The bootstrap program loads (via DMA) instructions and data for a new - * program from host DRAM locations indicated by the host driver in the - * BSM_DRAM_* registers. Once the new program is loaded, it starts - * automatically. - * - * When initializing the NIC, the host driver points the BSM to the - * "initialize" uCode image. This uCode sets up some internal data, then - * notifies host via "initialize alive" that it is complete. - * - * The host then replaces the BSM_DRAM_* pointer values to point to the - * normal runtime uCode instructions and a backup uCode data cache buffer - * (filled initially with starting data values for the on-board processor), - * then triggers the "initialize" uCode to load and launch the runtime uCode, - * which begins normal operation. - * - * When doing a power-save shutdown, runtime uCode saves data SRAM into - * the backup data cache in DRAM before SRAM is powered down. - * - * When powering back up, the BSM loads the bootstrap program. This reloads - * the runtime uCode instructions and the backup data cache into SRAM, - * and re-launches the runtime uCode from where it left off. - */ -static int -il3945_load_bsm(struct il_priv *il) -{ - __le32 *image = il->ucode_boot.v_addr; - u32 len = il->ucode_boot.len; - dma_addr_t pinst; - dma_addr_t pdata; - u32 inst_len; - u32 data_len; - int rc; - int i; - u32 done; - u32 reg_offset; - - D_INFO("Begin load bsm\n"); - - /* make sure bootstrap program is no larger than BSM's SRAM size */ - if (len > IL39_MAX_BSM_SIZE) - return -EINVAL; - - /* Tell bootstrap uCode where to find the "Initialize" uCode - * in host DRAM ... host DRAM physical address bits 31:0 for 3945. - * NOTE: il3945_initialize_alive_start() will replace these values, - * after the "initialize" uCode has run, to point to - * runtime/protocol instructions and backup data cache. */ - pinst = il->ucode_init.p_addr; - pdata = il->ucode_init_data.p_addr; - inst_len = il->ucode_init.len; - data_len = il->ucode_init_data.len; - - il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst); - il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata); - il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len); - il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len); - - /* Fill BSM memory with bootstrap instructions */ - for (reg_offset = BSM_SRAM_LOWER_BOUND; - reg_offset < BSM_SRAM_LOWER_BOUND + len; - reg_offset += sizeof(u32), image++) - _il_wr_prph(il, reg_offset, le32_to_cpu(*image)); - - rc = il3945_verify_bsm(il); - if (rc) - return rc; - - /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */ - il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0); - il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND); - il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32)); - - /* Load bootstrap code into instruction SRAM now, - * to prepare to load "initialize" uCode */ - il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START); - - /* Wait for load of bootstrap uCode to finish */ - for (i = 0; i < 100; i++) { - done = il_rd_prph(il, BSM_WR_CTRL_REG); - if (!(done & BSM_WR_CTRL_REG_BIT_START)) - break; - udelay(10); - } - if (i < 100) - D_INFO("BSM write complete, poll %d iterations\n", i); - else { - IL_ERR("BSM write did not complete!\n"); - return -EIO; - } - - /* Enable future boot loads whenever power management unit triggers it - * (e.g. when powering back up after power-save shutdown) */ - il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN); - - return 0; -} - -const struct il_ops il3945_ops = { - .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd, - .txq_free_tfd = il3945_hw_txq_free_tfd, - .txq_init = il3945_hw_tx_queue_init, - .load_ucode = il3945_load_bsm, - .dump_nic_error_log = il3945_dump_nic_error_log, - .apm_init = il3945_apm_init, - .send_tx_power = il3945_send_tx_power, - .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr, - .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore, - .eeprom_release_semaphore = il3945_eeprom_release_semaphore, - - .rxon_assoc = il3945_send_rxon_assoc, - .commit_rxon = il3945_commit_rxon, - - .get_hcmd_size = il3945_get_hcmd_size, - .build_addsta_hcmd = il3945_build_addsta_hcmd, - .request_scan = il3945_request_scan, - .post_scan = il3945_post_scan, - - .post_associate = il3945_post_associate, - .config_ap = il3945_config_ap, - .manage_ibss_station = il3945_manage_ibss_station, - - .send_led_cmd = il3945_send_led_cmd, -}; - -static struct il_cfg il3945_bg_cfg = { - .name = "3945BG", - .fw_name_pre = IL3945_FW_PRE, - .ucode_api_max = IL3945_UCODE_API_MAX, - .ucode_api_min = IL3945_UCODE_API_MIN, - .sku = IL_SKU_G, - .eeprom_ver = EEPROM_3945_EEPROM_VERSION, - .mod_params = &il3945_mod_params, - .led_mode = IL_LED_BLINK, - - .eeprom_size = IL3945_EEPROM_IMG_SIZE, - .num_of_queues = IL39_NUM_QUEUES, - .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, - .set_l0s = false, - .use_bsm = true, - .led_compensation = 64, - .wd_timeout = IL_DEF_WD_TIMEOUT, - - .regulatory_bands = { - EEPROM_REGULATORY_BAND_1_CHANNELS, - EEPROM_REGULATORY_BAND_2_CHANNELS, - EEPROM_REGULATORY_BAND_3_CHANNELS, - EEPROM_REGULATORY_BAND_4_CHANNELS, - EEPROM_REGULATORY_BAND_5_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - EEPROM_REGULATORY_BAND_NO_HT40, - }, -}; - -static struct il_cfg il3945_abg_cfg = { - .name = "3945ABG", - .fw_name_pre = IL3945_FW_PRE, - .ucode_api_max = IL3945_UCODE_API_MAX, - .ucode_api_min = IL3945_UCODE_API_MIN, - .sku = IL_SKU_A | IL_SKU_G, - .eeprom_ver = EEPROM_3945_EEPROM_VERSION, - .mod_params = &il3945_mod_params, - .led_mode = IL_LED_BLINK, - - .eeprom_size = IL3945_EEPROM_IMG_SIZE, - .num_of_queues = IL39_NUM_QUEUES, - .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL, - .set_l0s = false, - .use_bsm = true, - .led_compensation = 64, - .wd_timeout = IL_DEF_WD_TIMEOUT, - - .regulatory_bands = { - EEPROM_REGULATORY_BAND_1_CHANNELS, - EEPROM_REGULATORY_BAND_2_CHANNELS, - EEPROM_REGULATORY_BAND_3_CHANNELS, - EEPROM_REGULATORY_BAND_4_CHANNELS, - EEPROM_REGULATORY_BAND_5_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - EEPROM_REGULATORY_BAND_NO_HT40, - }, -}; - -const struct pci_device_id il3945_hw_card_ids[] = { - {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)}, - {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)}, - {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)}, - {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)}, - {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)}, - {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)}, - {0} -}; - -MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids); -- cgit v1.2.3-54-g00ecf