From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/net/wireless/iwlegacy/4965-mac.c | 6868 ------------------------------ 1 file changed, 6868 deletions(-) delete mode 100644 drivers/net/wireless/iwlegacy/4965-mac.c (limited to 'drivers/net/wireless/iwlegacy/4965-mac.c') diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c deleted file mode 100644 index 987917f8b..000000000 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ /dev/null @@ -1,6868 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#define DRV_NAME "iwl4965" - -#include "common.h" -#include "4965.h" - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux" - -#ifdef CONFIG_IWLEGACY_DEBUG -#define VD "d" -#else -#define VD -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("iwl4965"); - -void -il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status) -{ - if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { - IL_ERR("Tx flush command to flush out all frames\n"); - if (!test_bit(S_EXIT_PENDING, &il->status)) - queue_work(il->workqueue, &il->tx_flush); - } -} - -/* - * EEPROM - */ -struct il_mod_params il4965_mod_params = { - .restart_fw = 1, - /* the rest are 0 by default */ -}; - -void -il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq) -{ - unsigned long flags; - int i; - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].page != NULL) { - pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __il_free_pages(il, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } - - for (i = 0; i < RX_QUEUE_SIZE; i++) - rxq->queue[i] = NULL; - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->write_actual = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); -} - -int -il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) -{ - u32 rb_size; - const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ - u32 rb_timeout = 0; - - if (il->cfg->mod_params->amsdu_size_8K) - rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; - else - rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; - - /* Stop Rx DMA */ - il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); - - /* Reset driver's Rx queue write idx */ - il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); - - /* Tell device where to find RBD circular buffer in DRAM */ - il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8)); - - /* Tell device where in DRAM to update its Rx status */ - il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); - - /* Enable Rx DMA - * Direct rx interrupts to hosts - * Rx buffer size 4 or 8k - * RB timeout 0x10 - * 256 RBDs - */ - il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, - FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | - rb_size | - (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) | - (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); - - /* Set interrupt coalescing timer to default (2048 usecs) */ - il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF); - - return 0; -} - -static void -il4965_set_pwr_vmain(struct il_priv *il) -{ -/* - * (for documentation purposes) - * to set power to V_AUX, do: - - if (pci_pme_capable(il->pci_dev, PCI_D3cold)) - il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - */ - - il_set_bits_mask_prph(il, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); -} - -int -il4965_hw_nic_init(struct il_priv *il) -{ - unsigned long flags; - struct il_rx_queue *rxq = &il->rxq; - int ret; - - spin_lock_irqsave(&il->lock, flags); - il_apm_init(il); - /* Set interrupt coalescing calibration timer to default (512 usecs) */ - il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF); - spin_unlock_irqrestore(&il->lock, flags); - - il4965_set_pwr_vmain(il); - il4965_nic_config(il); - - /* Allocate the RX queue, or reset if it is already allocated */ - if (!rxq->bd) { - ret = il_rx_queue_alloc(il); - if (ret) { - IL_ERR("Unable to initialize Rx queue\n"); - return -ENOMEM; - } - } else - il4965_rx_queue_reset(il, rxq); - - il4965_rx_replenish(il); - - il4965_rx_init(il, rxq); - - spin_lock_irqsave(&il->lock, flags); - - rxq->need_update = 1; - il_rx_queue_update_write_ptr(il, rxq); - - spin_unlock_irqrestore(&il->lock, flags); - - /* Allocate or reset and init all Tx and Command queues */ - if (!il->txq) { - ret = il4965_txq_ctx_alloc(il); - if (ret) - return ret; - } else - il4965_txq_ctx_reset(il); - - set_bit(S_INIT, &il->status); - - return 0; -} - -/** - * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 -il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr) -{ - return cpu_to_le32((u32) (dma_addr >> 8)); -} - -/** - * il4965_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' idx forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -void -il4965_rx_queue_restock(struct il_priv *il) -{ - struct il_rx_queue *rxq = &il->rxq; - struct list_head *element; - struct il_rx_buf *rxb; - unsigned long flags; - - spin_lock_irqsave(&rxq->lock, flags); - while (il_rx_queue_space(rxq) > 0 && rxq->free_count) { - /* The overwritten rxb must be a used one */ - rxb = rxq->queue[rxq->write]; - BUG_ON(rxb && rxb->page); - - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct il_rx_buf, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = - il4965_dma_addr2rbd_ptr(il, rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - queue_work(il->workqueue, &il->rx_replenish); - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if (rxq->write_actual != (rxq->write & ~0x7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - il_rx_queue_update_write_ptr(il, rxq); - } -} - -/** - * il4965_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via il_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void -il4965_rx_allocate(struct il_priv *il, gfp_t priority) -{ - struct il_rx_queue *rxq = &il->rxq; - struct list_head *element; - struct il_rx_buf *rxb; - struct page *page; - dma_addr_t page_dma; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (il->hw_params.rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, il->hw_params.rx_page_order); - if (!page) { - if (net_ratelimit()) - D_INFO("alloc_pages failed, " "order: %d\n", - il->hw_params.rx_page_order); - - if (rxq->free_count <= RX_LOW_WATERMARK && - net_ratelimit()) - IL_ERR("Failed to alloc_pages with %s. " - "Only %u free buffers remaining.\n", - priority == - GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - return; - } - - /* Get physical address of the RB */ - page_dma = - pci_map_page(il->pci_dev, page, 0, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) { - __free_pages(page, il->hw_params.rx_page_order); - break; - } - - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - pci_unmap_page(il->pci_dev, page_dma, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __free_pages(page, il->hw_params.rx_page_order); - return; - } - - element = rxq->rx_used.next; - rxb = list_entry(element, struct il_rx_buf, list); - list_del(element); - - BUG_ON(rxb->page); - - rxb->page = page; - rxb->page_dma = page_dma; - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - il->alloc_rxb_page++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void -il4965_rx_replenish(struct il_priv *il) -{ - unsigned long flags; - - il4965_rx_allocate(il, GFP_KERNEL); - - spin_lock_irqsave(&il->lock, flags); - il4965_rx_queue_restock(il); - spin_unlock_irqrestore(&il->lock, flags); -} - -void -il4965_rx_replenish_now(struct il_priv *il) -{ - il4965_rx_allocate(il, GFP_ATOMIC); - - il4965_rx_queue_restock(il); -} - -/* Assumes that the skb field of the buffers in 'pool' is kept accurate. - * If an SKB has been detached, the POOL needs to have its SKB set to NULL - * This free routine walks the list of POOL entries and if SKB is set to - * non NULL it is unmapped and freed - */ -void -il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq) -{ - int i; - for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { - if (rxq->pool[i].page != NULL) { - pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - __il_free_pages(il, rxq->pool[i].page); - rxq->pool[i].page = NULL; - } - } - - dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, - rxq->bd_dma); - dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status), - rxq->rb_stts, rxq->rb_stts_dma); - rxq->bd = NULL; - rxq->rb_stts = NULL; -} - -int -il4965_rxq_stop(struct il_priv *il) -{ - int ret; - - _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); - ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG, - FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, - FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, - 1000); - if (ret < 0) - IL_ERR("Can't stop Rx DMA.\n"); - - return 0; -} - -int -il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) -{ - int idx = 0; - int band_offset = 0; - - /* HT rate format: mac80211 wants an MCS number, which is just LSB */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - return idx; - /* Legacy rate format, search for match in table */ - } else { - if (band == IEEE80211_BAND_5GHZ) - band_offset = IL_FIRST_OFDM_RATE; - for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++) - if (il_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx - band_offset; - } - - return -1; -} - -static int -il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp) -{ - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host. */ - struct il4965_rx_non_cfg_phy *ncphy = - (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; - u32 agc = - (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >> - IL49_AGC_DB_POS; - - u32 valid_antennae = - (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK) - >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; - u8 max_rssi = 0; - u32 i; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. */ - for (i = 0; i < 3; i++) - if (valid_antennae & (1 << i)) - max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - - D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", - ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], - max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc - IL4965_RSSI_OFFSET; -} - -static u32 -il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in) -{ - u32 decrypt_out = 0; - - if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == - RX_RES_STATUS_STATION_FOUND) - decrypt_out |= - (RX_RES_STATUS_STATION_FOUND | - RX_RES_STATUS_NO_STATION_INFO_MISMATCH); - - decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); - - /* packet was not encrypted */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_NONE) - return decrypt_out; - - /* packet was encrypted with unknown alg */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_ERR) - return decrypt_out; - - /* decryption was not done in HW */ - if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != - RX_MPDU_RES_STATUS_DEC_DONE_MSK) - return decrypt_out; - - switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { - - case RX_RES_STATUS_SEC_TYPE_CCMP: - /* alg is CCM: check MIC only */ - if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) - /* Bad MIC */ - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - - break; - - case RX_RES_STATUS_SEC_TYPE_TKIP: - if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { - /* Bad TTAK */ - decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; - break; - } - /* fall through if TTAK OK */ - default: - if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - break; - } - - D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", decrypt_in, decrypt_out); - - return decrypt_out; -} - -#define SMALL_PACKET_SIZE 256 - -static void -il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr, - u32 len, u32 ampdu_status, struct il_rx_buf *rxb, - struct ieee80211_rx_status *stats) -{ - struct sk_buff *skb; - __le16 fc = hdr->frame_control; - - /* We only process data packets if the interface is open */ - if (unlikely(!il->is_open)) { - D_DROP("Dropping packet while interface is not open.\n"); - return; - } - - if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) { - il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE); - D_INFO("Woke queues - frame received on passive channel\n"); - } - - /* In case of HW accelerated crypto and bad decryption, drop */ - if (!il->cfg->mod_params->sw_crypto && - il_set_decrypted_flag(il, hdr, ampdu_status, stats)) - return; - - skb = dev_alloc_skb(SMALL_PACKET_SIZE); - if (!skb) { - IL_ERR("dev_alloc_skb failed\n"); - return; - } - - if (len <= SMALL_PACKET_SIZE) { - memcpy(skb_put(skb, len), hdr, len); - } else { - skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), - len, PAGE_SIZE << il->hw_params.rx_page_order); - il->alloc_rxb_page--; - rxb->page = NULL; - } - - il_update_stats(il, false, fc, len); - memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - - ieee80211_rx(il->hw, skb); -} - -/* Called for N_RX (legacy ABG frames), or - * N_RX_MPDU (HT high-throughput N frames). */ -static void -il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status = {}; - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct il_rx_phy_res *phy_res; - __le32 rx_pkt_status; - struct il_rx_mpdu_res_start *amsdu; - u32 len; - u32 ampdu_status; - u32 rate_n_flags; - - /** - * N_RX and N_RX_MPDU are handled differently. - * N_RX: physical layer info is in this buffer - * N_RX_MPDU: physical layer info was sent in separate - * command and cached in il->last_phy_res - * - * Here we set up local variables depending on which command is - * received. - */ - if (pkt->hdr.cmd == N_RX) { - phy_res = (struct il_rx_phy_res *)pkt->u.raw; - header = - (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) + - phy_res->cfg_phy_cnt); - - len = le16_to_cpu(phy_res->byte_count); - rx_pkt_status = - *(__le32 *) (pkt->u.raw + sizeof(*phy_res) + - phy_res->cfg_phy_cnt + len); - ampdu_status = le32_to_cpu(rx_pkt_status); - } else { - if (!il->_4965.last_phy_res_valid) { - IL_ERR("MPDU frame without cached PHY data\n"); - return; - } - phy_res = &il->_4965.last_phy_res; - amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw; - header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); - len = le16_to_cpu(amsdu->byte_count); - rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len); - ampdu_status = - il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status)); - } - - if ((unlikely(phy_res->cfg_phy_cnt > 20))) { - D_DROP("dsp size out of range [0,20]: %d\n", - phy_res->cfg_phy_cnt); - return; - } - - if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || - !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status)); - return; - } - - /* This will be used in several places later */ - rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); - - /* rx_status carries information about the packet to mac80211 */ - rx_status.mactime = le64_to_cpu(phy_res->timestamp); - rx_status.band = - (phy_res-> - phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ : - IEEE80211_BAND_5GHZ; - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), - rx_status.band); - rx_status.rate_idx = - il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); - rx_status.flag = 0; - - /* TSF isn't reliable. In order to allow smooth user experience, - * this W/A doesn't propagate it to the mac80211 */ - /*rx_status.flag |= RX_FLAG_MACTIME_START; */ - - il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); - - /* Find max signal strength (dBm) among 3 antenna/receiver chains */ - rx_status.signal = il4965_calc_rssi(il, phy_res); - - D_STATS("Rssi %d, TSF %llu\n", rx_status.signal, - (unsigned long long)rx_status.mactime); - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bit field. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favor of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - rx_status.antenna = - (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >> - RX_RES_PHY_FLAGS_ANTENNA_POS; - - /* set the preamble flag if appropriate */ - if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - /* Set up the HT phy flags */ - if (rate_n_flags & RATE_MCS_HT_MSK) - rx_status.flag |= RX_FLAG_HT; - if (rate_n_flags & RATE_MCS_HT40_MSK) - rx_status.flag |= RX_FLAG_40MHZ; - if (rate_n_flags & RATE_MCS_SGI_MSK) - rx_status.flag |= RX_FLAG_SHORT_GI; - - if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) { - /* We know which subframes of an A-MPDU belong - * together since we get a single PHY response - * from the firmware for all of them. - */ - - rx_status.flag |= RX_FLAG_AMPDU_DETAILS; - rx_status.ampdu_reference = il->_4965.ampdu_ref; - } - - il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb, - &rx_status); -} - -/* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY). - * This will be used later in il_hdl_rx() for N_RX_MPDU. */ -static void -il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - il->_4965.last_phy_res_valid = true; - il->_4965.ampdu_ref++; - memcpy(&il->_4965.last_phy_res, pkt->u.raw, - sizeof(struct il_rx_phy_res)); -} - -static int -il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif, - enum ieee80211_band band, u8 is_active, - u8 n_probes, struct il_scan_channel *scan_ch) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - const struct il_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - u16 channel; - - sband = il_get_hw_mode(il, band); - if (!sband) - return 0; - - active_dwell = il_get_active_dwell_time(il, band, n_probes); - passive_dwell = il_get_passive_dwell_time(il, band, vif); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < il->scan_request->n_channels; i++) { - chan = il->scan_request->channels[i]; - - if (chan->band != band) - continue; - - channel = chan->hw_value; - scan_ch->channel = cpu_to_le16(channel); - - ch_info = il_get_channel_info(il, band, channel); - if (!il_is_channel_valid(ch_info)) { - D_SCAN("Channel %d is INVALID for this band.\n", - channel); - continue; - } - - if (!is_active || il_is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_NO_IR)) - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - - if (n_probes) - scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - - D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel, - le32_to_cpu(scan_ch->type), - (scan_ch-> - type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE", - (scan_ch-> - type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell : - passive_dwell); - - scan_ch++; - added++; - } - - D_SCAN("total channels to scan %d\n", added); - return added; -} - -static void -il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid) -{ - int i; - u8 ind = *ant; - - for (i = 0; i < RATE_ANT_NUM - 1; i++) { - ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; - if (valid & BIT(ind)) { - *ant = ind; - return; - } - } -} - -int -il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif) -{ - struct il_host_cmd cmd = { - .id = C_SCAN, - .len = sizeof(struct il_scan_cmd), - .flags = CMD_SIZE_HUGE, - }; - struct il_scan_cmd *scan; - u32 rate_flags = 0; - u16 cmd_len; - u16 rx_chain = 0; - enum ieee80211_band band; - u8 n_probes = 0; - u8 rx_ant = il->hw_params.valid_rx_ant; - u8 rate; - bool is_active = false; - int chan_mod; - u8 active_chains; - u8 scan_tx_antennas = il->hw_params.valid_tx_ant; - int ret; - - lockdep_assert_held(&il->mutex); - - if (!il->scan_cmd) { - il->scan_cmd = - kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE, - GFP_KERNEL); - if (!il->scan_cmd) { - D_SCAN("fail to allocate memory for scan\n"); - return -ENOMEM; - } - } - scan = il->scan_cmd; - memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH; - scan->quiet_time = IL_ACTIVE_QUIET_TIME; - - if (il_is_any_associated(il)) { - u16 interval; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - - D_INFO("Scanning while associated...\n"); - interval = vif->bss_conf.beacon_int; - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = - (extra | ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - D_SCAN("suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } - - if (il->scan_request->n_ssids) { - int i, p = 0; - D_SCAN("Kicking off active scan\n"); - for (i = 0; i < il->scan_request->n_ssids; i++) { - /* always does wildcard anyway */ - if (!il->scan_request->ssids[i].ssid_len) - continue; - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - il->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - il->scan_request->ssids[i].ssid, - il->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - D_SCAN("Start passive scan.\n"); - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = il->hw_params.bcast_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - switch (il->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - chan_mod = - le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >> - RXON_FLG_CHANNEL_MODE_POS; - if (chan_mod == CHANNEL_MODE_PURE_40) { - rate = RATE_6M_PLCP; - } else { - rate = RATE_1M_PLCP; - rate_flags = RATE_MCS_CCK_MSK; - } - break; - case IEEE80211_BAND_5GHZ: - rate = RATE_6M_PLCP; - break; - default: - IL_WARN("Invalid scan band\n"); - return -EIO; - } - - /* - * If active scanning is requested but a certain channel is - * marked passive, we can do active scanning if we detect - * transmissions. - * - * There is an issue with some firmware versions that triggers - * a sysassert on a "good CRC threshold" of zero (== disabled), - * on a radar channel even though this means that we should NOT - * send probes. - * - * The "good CRC threshold" is the number of frames that we - * need to receive during our dwell time on a channel before - * sending out probes -- setting this to a huge value will - * mean we never reach it, but at the same time work around - * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER - * here instead of IL_GOOD_CRC_TH_DISABLED. - */ - scan->good_CRC_th = - is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER; - - band = il->scan_band; - - if (il->cfg->scan_rx_antennas[band]) - rx_ant = il->cfg->scan_rx_antennas[band]; - - il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas); - rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS; - scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags); - - /* In power save mode use one chain, otherwise use all chains */ - if (test_bit(S_POWER_PMI, &il->status)) { - /* rx_ant has been set to all valid chains previously */ - active_chains = - rx_ant & ((u8) (il->chain_noise_data.active_chains)); - if (!active_chains) - active_chains = rx_ant; - - D_SCAN("chain_noise_data.active_chains: %u\n", - il->chain_noise_data.active_chains); - - rx_ant = il4965_first_antenna(active_chains); - } - - /* MIMO is not used here, but value is required */ - rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; - rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; - scan->rx_chain = cpu_to_le16(rx_chain); - - cmd_len = - il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data, - vif->addr, il->scan_request->ie, - il->scan_request->ie_len, - IL_MAX_SCAN_SIZE - sizeof(*scan)); - scan->tx_cmd.len = cpu_to_le16(cmd_len); - - scan->filter_flags |= - (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK); - - scan->channel_count = - il4965_get_channels_for_scan(il, vif, band, is_active, n_probes, - (void *)&scan->data[cmd_len]); - if (scan->channel_count == 0) { - D_SCAN("channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len += - le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct il_scan_channel); - cmd.data = scan; - scan->len = cpu_to_le16(cmd.len); - - set_bit(S_SCAN_HW, &il->status); - - ret = il_send_cmd_sync(il, &cmd); - if (ret) - clear_bit(S_SCAN_HW, &il->status); - - return ret; -} - -int -il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif, - bool add) -{ - struct il_vif_priv *vif_priv = (void *)vif->drv_priv; - - if (add) - return il4965_add_bssid_station(il, vif->bss_conf.bssid, - &vif_priv->ibss_bssid_sta_id); - return il_remove_station(il, vif_priv->ibss_bssid_sta_id, - vif->bss_conf.bssid); -} - -void -il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed) -{ - lockdep_assert_held(&il->sta_lock); - - if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed) - il->stations[sta_id].tid[tid].tfds_in_queue -= freed; - else { - D_TX("free more than tfds_in_queue (%u:%d)\n", - il->stations[sta_id].tid[tid].tfds_in_queue, freed); - il->stations[sta_id].tid[tid].tfds_in_queue = 0; - } -} - -#define IL_TX_QUEUE_MSK 0xfffff - -static bool -il4965_is_single_rx_stream(struct il_priv *il) -{ - return il->current_ht_config.smps == IEEE80211_SMPS_STATIC || - il->current_ht_config.single_chain_sufficient; -} - -#define IL_NUM_RX_CHAINS_MULTIPLE 3 -#define IL_NUM_RX_CHAINS_SINGLE 2 -#define IL_NUM_IDLE_CHAINS_DUAL 2 -#define IL_NUM_IDLE_CHAINS_SINGLE 1 - -/* - * Determine how many receiver/antenna chains to use. - * - * More provides better reception via diversity. Fewer saves power - * at the expense of throughput, but only when not in powersave to - * start with. - * - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. - */ -static int -il4965_get_active_rx_chain_count(struct il_priv *il) -{ - /* # of Rx chains to use when expecting MIMO. */ - if (il4965_is_single_rx_stream(il)) - return IL_NUM_RX_CHAINS_SINGLE; - else - return IL_NUM_RX_CHAINS_MULTIPLE; -} - -/* - * When we are in power saving mode, unless device support spatial - * multiplexing power save, use the active count for rx chain count. - */ -static int -il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt) -{ - /* # Rx chains when idling, depending on SMPS mode */ - switch (il->current_ht_config.smps) { - case IEEE80211_SMPS_STATIC: - case IEEE80211_SMPS_DYNAMIC: - return IL_NUM_IDLE_CHAINS_SINGLE; - case IEEE80211_SMPS_OFF: - return active_cnt; - default: - WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps); - return active_cnt; - } -} - -/* up to 4 chains */ -static u8 -il4965_count_chain_bitmap(u32 chain_bitmap) -{ - u8 res; - res = (chain_bitmap & BIT(0)) >> 0; - res += (chain_bitmap & BIT(1)) >> 1; - res += (chain_bitmap & BIT(2)) >> 2; - res += (chain_bitmap & BIT(3)) >> 3; - return res; -} - -/** - * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void -il4965_set_rxon_chain(struct il_priv *il) -{ - bool is_single = il4965_is_single_rx_stream(il); - bool is_cam = !test_bit(S_POWER_PMI, &il->status); - u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; - u32 active_chains; - u16 rx_chain; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, il4965_chain_noise_calibration() - * checks which antennas actually *are* connected. */ - if (il->chain_noise_data.active_chains) - active_chains = il->chain_noise_data.active_chains; - else - active_chains = il->hw_params.valid_rx_ant; - - rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; - - /* How many receivers should we use? */ - active_rx_cnt = il4965_get_active_rx_chain_count(il); - idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt); - - /* correct rx chain count according hw settings - * and chain noise calibration - */ - valid_rx_cnt = il4965_count_chain_bitmap(active_chains); - if (valid_rx_cnt < active_rx_cnt) - active_rx_cnt = valid_rx_cnt; - - if (valid_rx_cnt < idle_rx_cnt) - idle_rx_cnt = valid_rx_cnt; - - rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; - rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; - - il->staging.rx_chain = cpu_to_le16(rx_chain); - - if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam) - il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain, - active_rx_cnt, idle_rx_cnt); - - WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || - active_rx_cnt < idle_rx_cnt); -} - -static const char * -il4965_get_fh_string(int cmd) -{ - switch (cmd) { - IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG); - IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG); - IL_CMD(FH49_RSCSR_CHNL0_WPTR); - IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG); - IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG); - IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG); - IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); - IL_CMD(FH49_TSSR_TX_STATUS_REG); - IL_CMD(FH49_TSSR_TX_ERROR_REG); - default: - return "UNKNOWN"; - } -} - -int -il4965_dump_fh(struct il_priv *il, char **buf, bool display) -{ - int i; -#ifdef CONFIG_IWLEGACY_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif - static const u32 fh_tbl[] = { - FH49_RSCSR_CHNL0_STTS_WPTR_REG, - FH49_RSCSR_CHNL0_RBDCB_BASE_REG, - FH49_RSCSR_CHNL0_WPTR, - FH49_MEM_RCSR_CHNL0_CONFIG_REG, - FH49_MEM_RSSR_SHARED_CTRL_REG, - FH49_MEM_RSSR_RX_STATUS_REG, - FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, - FH49_TSSR_TX_STATUS_REG, - FH49_TSSR_TX_ERROR_REG - }; -#ifdef CONFIG_IWLEGACY_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - pos += - scnprintf(*buf + pos, bufsz - pos, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - pos += - scnprintf(*buf + pos, bufsz - pos, - " %34s: 0X%08x\n", - il4965_get_fh_string(fh_tbl[i]), - il_rd(il, fh_tbl[i])); - } - return pos; - } -#endif - IL_ERR("FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]), - il_rd(il, fh_tbl[i])); - } - return 0; -} - -static void -il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct il_missed_beacon_notif *missed_beacon; - - missed_beacon = &pkt->u.missed_beacon; - if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > - il->missed_beacon_threshold) { - D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n", - le32_to_cpu(missed_beacon->consecutive_missed_beacons), - le32_to_cpu(missed_beacon->total_missed_becons), - le32_to_cpu(missed_beacon->num_recvd_beacons), - le32_to_cpu(missed_beacon->num_expected_beacons)); - if (!test_bit(S_SCANNING, &il->status)) - il4965_init_sensitivity(il); - } -} - -/* Calculate noise level, based on measurements during network silence just - * before arriving beacon. This measurement can be done only if we know - * exactly when to expect beacons, therefore only when we're associated. */ -static void -il4965_rx_calc_noise(struct il_priv *il) -{ - struct stats_rx_non_phy *rx_info; - int num_active_rx = 0; - int total_silence = 0; - int bcn_silence_a, bcn_silence_b, bcn_silence_c; - int last_rx_noise; - - rx_info = &(il->_4965.stats.rx.general); - bcn_silence_a = - le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; - bcn_silence_b = - le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; - bcn_silence_c = - le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; - - if (bcn_silence_a) { - total_silence += bcn_silence_a; - num_active_rx++; - } - if (bcn_silence_b) { - total_silence += bcn_silence_b; - num_active_rx++; - } - if (bcn_silence_c) { - total_silence += bcn_silence_c; - num_active_rx++; - } - - /* Average among active antennas */ - if (num_active_rx) - last_rx_noise = (total_silence / num_active_rx) - 107; - else - last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE; - - D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a, - bcn_silence_b, bcn_silence_c, last_rx_noise); -} - -#ifdef CONFIG_IWLEGACY_DEBUGFS -/* - * based on the assumption of all stats counter are in DWORD - * FIXME: This function is for debugging, do not deal with - * the case of counters roll-over. - */ -static void -il4965_accumulative_stats(struct il_priv *il, __le32 * stats) -{ - int i, size; - __le32 *prev_stats; - u32 *accum_stats; - u32 *delta, *max_delta; - struct stats_general_common *general, *accum_general; - struct stats_tx *tx, *accum_tx; - - prev_stats = (__le32 *) &il->_4965.stats; - accum_stats = (u32 *) &il->_4965.accum_stats; - size = sizeof(struct il_notif_stats); - general = &il->_4965.stats.general.common; - accum_general = &il->_4965.accum_stats.general.common; - tx = &il->_4965.stats.tx; - accum_tx = &il->_4965.accum_stats.tx; - delta = (u32 *) &il->_4965.delta_stats; - max_delta = (u32 *) &il->_4965.max_delta; - - for (i = sizeof(__le32); i < size; - i += - sizeof(__le32), stats++, prev_stats++, delta++, max_delta++, - accum_stats++) { - if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { - *delta = - (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats)); - *accum_stats += *delta; - if (*delta > *max_delta) - *max_delta = *delta; - } - } - - /* reset accumulative stats for "no-counter" type stats */ - accum_general->temperature = general->temperature; - accum_general->ttl_timestamp = general->ttl_timestamp; -} -#endif - -static void -il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb) -{ - const int recalib_seconds = 60; - bool change; - struct il_rx_pkt *pkt = rxb_addr(rxb); - - D_RX("Statistics notification received (%d vs %d).\n", - (int)sizeof(struct il_notif_stats), - le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK); - - change = - ((il->_4965.stats.general.common.temperature != - pkt->u.stats.general.common.temperature) || - ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) != - (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK))); -#ifdef CONFIG_IWLEGACY_DEBUGFS - il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats); -#endif - - /* TODO: reading some of stats is unneeded */ - memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats)); - - set_bit(S_STATS, &il->status); - - /* - * Reschedule the stats timer to occur in recalib_seconds to ensure - * we get a thermal update even if the uCode doesn't give us one - */ - mod_timer(&il->stats_periodic, - jiffies + msecs_to_jiffies(recalib_seconds * 1000)); - - if (unlikely(!test_bit(S_SCANNING, &il->status)) && - (pkt->hdr.cmd == N_STATS)) { - il4965_rx_calc_noise(il); - queue_work(il->workqueue, &il->run_time_calib_work); - } - - if (change) - il4965_temperature_calib(il); -} - -static void -il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - - if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) { -#ifdef CONFIG_IWLEGACY_DEBUGFS - memset(&il->_4965.accum_stats, 0, - sizeof(struct il_notif_stats)); - memset(&il->_4965.delta_stats, 0, - sizeof(struct il_notif_stats)); - memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats)); -#endif - D_RX("Statistics have been cleared\n"); - } - il4965_hdl_stats(il, rxb); -} - - -/* - * mac80211 queues, ACs, hardware queues, FIFOs. - * - * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues - * - * Mac80211 uses the following numbers, which we get as from it - * by way of skb_get_queue_mapping(skb): - * - * VO 0 - * VI 1 - * BE 2 - * BK 3 - * - * - * Regular (not A-MPDU) frames are put into hardware queues corresponding - * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their - * own queue per aggregation session (RA/TID combination), such queues are - * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In - * order to map frames to the right queue, we also need an AC->hw queue - * mapping. This is implemented here. - * - * Due to the way hw queues are set up (by the hw specific modules like - * 4965.c), the AC->hw queue mapping is the identity - * mapping. - */ - -static const u8 tid_to_ac[] = { - IEEE80211_AC_BE, - IEEE80211_AC_BK, - IEEE80211_AC_BK, - IEEE80211_AC_BE, - IEEE80211_AC_VI, - IEEE80211_AC_VI, - IEEE80211_AC_VO, - IEEE80211_AC_VO -}; - -static inline int -il4965_get_ac_from_tid(u16 tid) -{ - if (likely(tid < ARRAY_SIZE(tid_to_ac))) - return tid_to_ac[tid]; - - /* no support for TIDs 8-15 yet */ - return -EINVAL; -} - -static inline int -il4965_get_fifo_from_tid(u16 tid) -{ - const u8 ac_to_fifo[] = { - IL_TX_FIFO_VO, - IL_TX_FIFO_VI, - IL_TX_FIFO_BE, - IL_TX_FIFO_BK, - }; - - if (likely(tid < ARRAY_SIZE(tid_to_ac))) - return ac_to_fifo[tid_to_ac[tid]]; - - /* no support for TIDs 8-15 yet */ - return -EINVAL; -} - -/* - * handle build C_TX command notification. - */ -static void -il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb, - struct il_tx_cmd *tx_cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, u8 std_id) -{ - __le16 fc = hdr->frame_control; - __le32 tx_flags = tx_cmd->tx_flags; - - tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) { - tx_flags |= TX_CMD_FLG_ACK_MSK; - if (ieee80211_is_mgmt(fc)) - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - if (ieee80211_is_probe_resp(fc) && - !(le16_to_cpu(hdr->seq_ctrl) & 0xf)) - tx_flags |= TX_CMD_FLG_TSF_MSK; - } else { - tx_flags &= (~TX_CMD_FLG_ACK_MSK); - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - if (ieee80211_is_back_req(fc)) - tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; - - tx_cmd->sta_id = std_id; - if (ieee80211_has_morefrags(fc)) - tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tx_cmd->tid_tspec = qc[0] & 0xf; - tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } else { - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - } - - il_tx_cmd_protection(il, info, fc, &tx_flags); - - tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); - if (ieee80211_is_mgmt(fc)) { - if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); - else - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); - } else { - tx_cmd->timeout.pm_frame_timeout = 0; - } - - tx_cmd->driver_txop = 0; - tx_cmd->tx_flags = tx_flags; - tx_cmd->next_frame_len = 0; -} - -static void -il4965_tx_cmd_build_rate(struct il_priv *il, - struct il_tx_cmd *tx_cmd, - struct ieee80211_tx_info *info, - struct ieee80211_sta *sta, - __le16 fc) -{ - const u8 rts_retry_limit = 60; - u32 rate_flags; - int rate_idx; - u8 data_retry_limit; - u8 rate_plcp; - - /* Set retry limit on DATA packets and Probe Responses */ - if (ieee80211_is_probe_resp(fc)) - data_retry_limit = 3; - else - data_retry_limit = IL4965_DEFAULT_TX_RETRY; - tx_cmd->data_retry_limit = data_retry_limit; - /* Set retry limit on RTS packets */ - tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit); - - /* DATA packets will use the uCode station table for rate/antenna - * selection */ - if (ieee80211_is_data(fc)) { - tx_cmd->initial_rate_idx = 0; - tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; - return; - } - - /** - * If the current TX rate stored in mac80211 has the MCS bit set, it's - * not really a TX rate. Thus, we use the lowest supported rate for - * this band. Also use the lowest supported rate if the stored rate - * idx is invalid. - */ - rate_idx = info->control.rates[0].idx; - if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0 - || rate_idx > RATE_COUNT_LEGACY) - rate_idx = rate_lowest_index(&il->bands[info->band], sta); - /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx += IL_FIRST_OFDM_RATE; - /* Get PLCP rate for tx_cmd->rate_n_flags */ - rate_plcp = il_rates[rate_idx].plcp; - /* Zero out flags for this packet */ - rate_flags = 0; - - /* Set CCK flag as needed */ - if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - /* Set up antennas */ - il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); - rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; - - /* Set the rate in the TX cmd */ - tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags); -} - -static void -il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, - struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag, - int sta_id) -{ - struct ieee80211_key_conf *keyconf = info->control.hw_key; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - tx_cmd->sec_ctl = TX_CMD_SEC_CCM; - memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); - if (info->flags & IEEE80211_TX_CTL_AMPDU) - tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; - D_TX("tx_cmd with AES hwcrypto\n"); - break; - - case WLAN_CIPHER_SUITE_TKIP: - tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; - ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); - D_TX("tx_cmd with tkip hwcrypto\n"); - break; - - case WLAN_CIPHER_SUITE_WEP104: - tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; - /* fall through */ - case WLAN_CIPHER_SUITE_WEP40: - tx_cmd->sec_ctl |= - (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) << - TX_CMD_SEC_SHIFT); - - memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); - - D_TX("Configuring packet for WEP encryption " "with key %d\n", - keyconf->keyidx); - break; - - default: - IL_ERR("Unknown encode cipher %x\n", keyconf->cipher); - break; - } -} - -/* - * start C_TX command process - */ -int -il4965_tx_skb(struct il_priv *il, - struct ieee80211_sta *sta, - struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct il_station_priv *sta_priv = NULL; - struct il_tx_queue *txq; - struct il_queue *q; - struct il_device_cmd *out_cmd; - struct il_cmd_meta *out_meta; - struct il_tx_cmd *tx_cmd; - int txq_id; - dma_addr_t phys_addr; - dma_addr_t txcmd_phys; - dma_addr_t scratch_phys; - u16 len, firstlen, secondlen; - u16 seq_number = 0; - __le16 fc; - u8 hdr_len; - u8 sta_id; - u8 wait_write_ptr = 0; - u8 tid = 0; - u8 *qc = NULL; - unsigned long flags; - bool is_agg = false; - - spin_lock_irqsave(&il->lock, flags); - if (il_is_rfkill(il)) { - D_DROP("Dropping - RF KILL\n"); - goto drop_unlock; - } - - fc = hdr->frame_control; - -#ifdef CONFIG_IWLEGACY_DEBUG - if (ieee80211_is_auth(fc)) - D_TX("Sending AUTH frame\n"); - else if (ieee80211_is_assoc_req(fc)) - D_TX("Sending ASSOC frame\n"); - else if (ieee80211_is_reassoc_req(fc)) - D_TX("Sending REASSOC frame\n"); -#endif - - hdr_len = ieee80211_hdrlen(fc); - - /* For management frames use broadcast id to do not break aggregation */ - if (!ieee80211_is_data(fc)) - sta_id = il->hw_params.bcast_id; - else { - /* Find idx into station table for destination station */ - sta_id = il_sta_id_or_broadcast(il, sta); - - if (sta_id == IL_INVALID_STATION) { - D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); - goto drop_unlock; - } - } - - D_TX("station Id %d\n", sta_id); - - if (sta) - sta_priv = (void *)sta->drv_priv; - - if (sta_priv && sta_priv->asleep && - (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { - /* - * This sends an asynchronous command to the device, - * but we can rely on it being processed before the - * next frame is processed -- and the next frame to - * this station is the one that will consume this - * counter. - * For now set the counter to just 1 since we do not - * support uAPSD yet. - */ - il4965_sta_modify_sleep_tx_count(il, sta_id, 1); - } - - /* FIXME: remove me ? */ - WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM); - - /* Access category (AC) is also the queue number */ - txq_id = skb_get_queue_mapping(skb); - - /* irqs already disabled/saved above when locking il->lock */ - spin_lock(&il->sta_lock); - - if (ieee80211_is_data_qos(fc)) { - qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; - if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) { - spin_unlock(&il->sta_lock); - goto drop_unlock; - } - seq_number = il->stations[sta_id].tid[tid].seq_number; - seq_number &= IEEE80211_SCTL_SEQ; - hdr->seq_ctrl = - hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(seq_number); - seq_number += 0x10; - /* aggregation is on for this */ - if (info->flags & IEEE80211_TX_CTL_AMPDU && - il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) { - txq_id = il->stations[sta_id].tid[tid].agg.txq_id; - is_agg = true; - } - } - - txq = &il->txq[txq_id]; - q = &txq->q; - - if (unlikely(il_queue_space(q) < q->high_mark)) { - spin_unlock(&il->sta_lock); - goto drop_unlock; - } - - if (ieee80211_is_data_qos(fc)) { - il->stations[sta_id].tid[tid].tfds_in_queue++; - if (!ieee80211_has_morefrags(fc)) - il->stations[sta_id].tid[tid].seq_number = seq_number; - } - - spin_unlock(&il->sta_lock); - - txq->skbs[q->write_ptr] = skb; - - /* Set up first empty entry in queue's array of Tx/cmd buffers */ - out_cmd = txq->cmd[q->write_ptr]; - out_meta = &txq->meta[q->write_ptr]; - tx_cmd = &out_cmd->cmd.tx; - memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); - memset(tx_cmd, 0, sizeof(struct il_tx_cmd)); - - /* - * Set up the Tx-command (not MAC!) header. - * Store the chosen Tx queue and TFD idx within the sequence field; - * after Tx, uCode's Tx response will return this value so driver can - * locate the frame within the tx queue and do post-tx processing. - */ - out_cmd->hdr.cmd = C_TX; - out_cmd->hdr.sequence = - cpu_to_le16((u16) - (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr))); - - /* Copy MAC header from skb into command buffer */ - memcpy(tx_cmd->hdr, hdr, hdr_len); - - /* Total # bytes to be transmitted */ - tx_cmd->len = cpu_to_le16((u16) skb->len); - - if (info->control.hw_key) - il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); - - /* TODO need this for burst mode later on */ - il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id); - - il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); - - /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. - */ - len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len; - firstlen = (len + 3) & ~3; - - /* Tell NIC about any 2-byte padding after MAC header */ - if (firstlen != len) - tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = - pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, - PCI_DMA_BIDIRECTIONAL); - if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) - goto drop_unlock; - - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - secondlen = skb->len - hdr_len; - if (secondlen > 0) { - phys_addr = - pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, - PCI_DMA_TODEVICE); - if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) - goto drop_unlock; - } - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); - if (secondlen) - il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, - 0, 0); - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - scratch_phys = - txcmd_phys + sizeof(struct il_cmd_header) + - offsetof(struct il_tx_cmd, scratch); - - /* take back ownership of DMA buffer to enable update */ - pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen, - PCI_DMA_BIDIRECTIONAL); - tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); - tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); - - il_update_stats(il, true, fc, skb->len); - - D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); - D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); - il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len); - - /* Set up entry for this TFD in Tx byte-count array */ - if (info->flags & IEEE80211_TX_CTL_AMPDU) - il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len)); - - pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen, - PCI_DMA_BIDIRECTIONAL); - - /* Tell device the write idx *just past* this latest filled TFD */ - q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); - il_txq_update_write_ptr(il, txq); - spin_unlock_irqrestore(&il->lock, flags); - - /* - * At this point the frame is "transmitted" successfully - * and we will get a TX status notification eventually, - * regardless of the value of ret. "ret" only indicates - * whether or not we should update the write pointer. - */ - - /* - * Avoid atomic ops if it isn't an associated client. - * Also, if this is a packet for aggregation, don't - * increase the counter because the ucode will stop - * aggregation queues when their respective station - * goes to sleep. - */ - if (sta_priv && sta_priv->client && !is_agg) - atomic_inc(&sta_priv->pending_frames); - - if (il_queue_space(q) < q->high_mark && il->mac80211_registered) { - if (wait_write_ptr) { - spin_lock_irqsave(&il->lock, flags); - txq->need_update = 1; - il_txq_update_write_ptr(il, txq); - spin_unlock_irqrestore(&il->lock, flags); - } else { - il_stop_queue(il, txq); - } - } - - return 0; - -drop_unlock: - spin_unlock_irqrestore(&il->lock, flags); - return -1; -} - -static inline int -il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size) -{ - ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma, - GFP_KERNEL); - if (!ptr->addr) - return -ENOMEM; - ptr->size = size; - return 0; -} - -static inline void -il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr) -{ - if (unlikely(!ptr->addr)) - return; - - dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma); - memset(ptr, 0, sizeof(*ptr)); -} - -/** - * il4965_hw_txq_ctx_free - Free TXQ Context - * - * Destroy all TX DMA queues and structures - */ -void -il4965_hw_txq_ctx_free(struct il_priv *il) -{ - int txq_id; - - /* Tx queues */ - if (il->txq) { - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) - if (txq_id == il->cmd_queue) - il_cmd_queue_free(il); - else - il_tx_queue_free(il, txq_id); - } - il4965_free_dma_ptr(il, &il->kw); - - il4965_free_dma_ptr(il, &il->scd_bc_tbls); - - /* free tx queue structure */ - il_free_txq_mem(il); -} - -/** - * il4965_txq_ctx_alloc - allocate TX queue context - * Allocate all Tx DMA structures and initialize them - * - * @param il - * @return error code - */ -int -il4965_txq_ctx_alloc(struct il_priv *il) -{ - int ret, txq_id; - unsigned long flags; - - /* Free all tx/cmd queues and keep-warm buffer */ - il4965_hw_txq_ctx_free(il); - - ret = - il4965_alloc_dma_ptr(il, &il->scd_bc_tbls, - il->hw_params.scd_bc_tbls_size); - if (ret) { - IL_ERR("Scheduler BC Table allocation failed\n"); - goto error_bc_tbls; - } - /* Alloc keep-warm buffer */ - ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE); - if (ret) { - IL_ERR("Keep Warm allocation failed\n"); - goto error_kw; - } - - /* allocate tx queue structure */ - ret = il_alloc_txq_mem(il); - if (ret) - goto error; - - spin_lock_irqsave(&il->lock, flags); - - /* Turn off all Tx DMA fifos */ - il4965_txq_set_sched(il, 0); - - /* Tell NIC where to find the "keep warm" buffer */ - il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); - - spin_unlock_irqrestore(&il->lock, flags); - - /* Alloc and init all Tx queues, including the command queue (#4/#9) */ - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) { - ret = il_tx_queue_init(il, txq_id); - if (ret) { - IL_ERR("Tx %d queue init failed\n", txq_id); - goto error; - } - } - - return ret; - -error: - il4965_hw_txq_ctx_free(il); - il4965_free_dma_ptr(il, &il->kw); -error_kw: - il4965_free_dma_ptr(il, &il->scd_bc_tbls); -error_bc_tbls: - return ret; -} - -void -il4965_txq_ctx_reset(struct il_priv *il) -{ - int txq_id; - unsigned long flags; - - spin_lock_irqsave(&il->lock, flags); - - /* Turn off all Tx DMA fifos */ - il4965_txq_set_sched(il, 0); - /* Tell NIC where to find the "keep warm" buffer */ - il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); - - spin_unlock_irqrestore(&il->lock, flags); - - /* Alloc and init all Tx queues, including the command queue (#4) */ - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) - il_tx_queue_reset(il, txq_id); -} - -static void -il4965_txq_ctx_unmap(struct il_priv *il) -{ - int txq_id; - - if (!il->txq) - return; - - /* Unmap DMA from host system and free skb's */ - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) - if (txq_id == il->cmd_queue) - il_cmd_queue_unmap(il); - else - il_tx_queue_unmap(il, txq_id); -} - -/** - * il4965_txq_ctx_stop - Stop all Tx DMA channels - */ -void -il4965_txq_ctx_stop(struct il_priv *il) -{ - int ch, ret; - - _il_wr_prph(il, IL49_SCD_TXFACT, 0); - - /* Stop each Tx DMA channel, and wait for it to be idle */ - for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) { - _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); - ret = - _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG, - FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), - FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), - 1000); - if (ret < 0) - IL_ERR("Timeout stopping DMA channel %d [0x%08x]", - ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG)); - } -} - -/* - * Find first available (lowest unused) Tx Queue, mark it "active". - * Called only when finding queue for aggregation. - * Should never return anything < 7, because they should already - * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) - */ -static int -il4965_txq_ctx_activate_free(struct il_priv *il) -{ - int txq_id; - - for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) - if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk)) - return txq_id; - return -1; -} - -/** - * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration - */ -static void -il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id) -{ - /* Simply stop the queue, but don't change any configuration; - * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ - il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), - (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); -} - -/** - * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue - */ -static int -il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id) -{ - u32 tbl_dw_addr; - u32 tbl_dw; - u16 scd_q2ratid; - - scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK; - - tbl_dw_addr = - il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id); - - tbl_dw = il_read_targ_mem(il, tbl_dw_addr); - - if (txq_id & 0x1) - tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); - else - tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); - - il_write_targ_mem(il, tbl_dw_addr, tbl_dw); - - return 0; -} - -/** - * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue - * - * NOTE: txq_id must be greater than IL49_FIRST_AMPDU_QUEUE, - * i.e. it must be one of the higher queues used for aggregation - */ -static int -il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id, - int tid, u16 ssn_idx) -{ - unsigned long flags; - u16 ra_tid; - int ret; - - if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || - (IL49_FIRST_AMPDU_QUEUE + - il->cfg->num_of_ampdu_queues <= txq_id)) { - IL_WARN("queue number out of range: %d, must be %d to %d\n", - txq_id, IL49_FIRST_AMPDU_QUEUE, - IL49_FIRST_AMPDU_QUEUE + - il->cfg->num_of_ampdu_queues - 1); - return -EINVAL; - } - - ra_tid = BUILD_RAxTID(sta_id, tid); - - /* Modify device's station table to Tx this TID */ - ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid); - if (ret) - return ret; - - spin_lock_irqsave(&il->lock, flags); - - /* Stop this Tx queue before configuring it */ - il4965_tx_queue_stop_scheduler(il, txq_id); - - /* Map receiver-address / traffic-ID to this queue */ - il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id); - - /* Set this queue as a chain-building queue */ - il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); - - /* Place first TFD at idx corresponding to start sequence number. - * Assumes that ssn_idx is valid (!= 0xFFF) */ - il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); - il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); - il4965_set_wr_ptrs(il, txq_id, ssn_idx); - - /* Set up Tx win size and frame limit for this queue */ - il_write_targ_mem(il, - il->scd_base_addr + - IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id), - (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) - & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); - - il_write_targ_mem(il, - il->scd_base_addr + - IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), - (SCD_FRAME_LIMIT << - IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); - - il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); - - /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ - il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1); - - spin_unlock_irqrestore(&il->lock, flags); - - return 0; -} - -int -il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid, u16 * ssn) -{ - int sta_id; - int tx_fifo; - int txq_id; - int ret; - unsigned long flags; - struct il_tid_data *tid_data; - - /* FIXME: warning if tx fifo not found ? */ - tx_fifo = il4965_get_fifo_from_tid(tid); - if (unlikely(tx_fifo < 0)) - return tx_fifo; - - D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid); - - sta_id = il_sta_id(sta); - if (sta_id == IL_INVALID_STATION) { - IL_ERR("Start AGG on invalid station\n"); - return -ENXIO; - } - if (unlikely(tid >= MAX_TID_COUNT)) - return -EINVAL; - - if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) { - IL_ERR("Start AGG when state is not IL_AGG_OFF !\n"); - return -ENXIO; - } - - txq_id = il4965_txq_ctx_activate_free(il); - if (txq_id == -1) { - IL_ERR("No free aggregation queue available\n"); - return -ENXIO; - } - - spin_lock_irqsave(&il->sta_lock, flags); - tid_data = &il->stations[sta_id].tid[tid]; - *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); - tid_data->agg.txq_id = txq_id; - il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id); - spin_unlock_irqrestore(&il->sta_lock, flags); - - ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn); - if (ret) - return ret; - - spin_lock_irqsave(&il->sta_lock, flags); - tid_data = &il->stations[sta_id].tid[tid]; - if (tid_data->tfds_in_queue == 0) { - D_HT("HW queue is empty\n"); - tid_data->agg.state = IL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); - } else { - D_HT("HW queue is NOT empty: %d packets in HW queue\n", - tid_data->tfds_in_queue); - tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA; - } - spin_unlock_irqrestore(&il->sta_lock, flags); - return ret; -} - -/** - * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE - * il->lock must be held by the caller - */ -static int -il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo) -{ - if ((IL49_FIRST_AMPDU_QUEUE > txq_id) || - (IL49_FIRST_AMPDU_QUEUE + - il->cfg->num_of_ampdu_queues <= txq_id)) { - IL_WARN("queue number out of range: %d, must be %d to %d\n", - txq_id, IL49_FIRST_AMPDU_QUEUE, - IL49_FIRST_AMPDU_QUEUE + - il->cfg->num_of_ampdu_queues - 1); - return -EINVAL; - } - - il4965_tx_queue_stop_scheduler(il, txq_id); - - il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id)); - - il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff); - il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff); - /* supposes that ssn_idx is valid (!= 0xFFF) */ - il4965_set_wr_ptrs(il, txq_id, ssn_idx); - - il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id)); - il_txq_ctx_deactivate(il, txq_id); - il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0); - - return 0; -} - -int -il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid) -{ - int tx_fifo_id, txq_id, sta_id, ssn; - struct il_tid_data *tid_data; - int write_ptr, read_ptr; - unsigned long flags; - - /* FIXME: warning if tx_fifo_id not found ? */ - tx_fifo_id = il4965_get_fifo_from_tid(tid); - if (unlikely(tx_fifo_id < 0)) - return tx_fifo_id; - - sta_id = il_sta_id(sta); - - if (sta_id == IL_INVALID_STATION) { - IL_ERR("Invalid station for AGG tid %d\n", tid); - return -ENXIO; - } - - spin_lock_irqsave(&il->sta_lock, flags); - - tid_data = &il->stations[sta_id].tid[tid]; - ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; - txq_id = tid_data->agg.txq_id; - - switch (il->stations[sta_id].tid[tid].agg.state) { - case IL_EMPTYING_HW_QUEUE_ADDBA: - /* - * This can happen if the peer stops aggregation - * again before we've had a chance to drain the - * queue we selected previously, i.e. before the - * session was really started completely. - */ - D_HT("AGG stop before setup done\n"); - goto turn_off; - case IL_AGG_ON: - break; - default: - IL_WARN("Stopping AGG while state not ON or starting\n"); - } - - write_ptr = il->txq[txq_id].q.write_ptr; - read_ptr = il->txq[txq_id].q.read_ptr; - - /* The queue is not empty */ - if (write_ptr != read_ptr) { - D_HT("Stopping a non empty AGG HW QUEUE\n"); - il->stations[sta_id].tid[tid].agg.state = - IL_EMPTYING_HW_QUEUE_DELBA; - spin_unlock_irqrestore(&il->sta_lock, flags); - return 0; - } - - D_HT("HW queue is empty\n"); -turn_off: - il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF; - - /* do not restore/save irqs */ - spin_unlock(&il->sta_lock); - spin_lock(&il->lock); - - /* - * the only reason this call can fail is queue number out of range, - * which can happen if uCode is reloaded and all the station - * information are lost. if it is outside the range, there is no need - * to deactivate the uCode queue, just return "success" to allow - * mac80211 to clean up it own data. - */ - il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id); - spin_unlock_irqrestore(&il->lock, flags); - - ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); - - return 0; -} - -int -il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id) -{ - struct il_queue *q = &il->txq[txq_id].q; - u8 *addr = il->stations[sta_id].sta.sta.addr; - struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid]; - - lockdep_assert_held(&il->sta_lock); - - switch (il->stations[sta_id].tid[tid].agg.state) { - case IL_EMPTYING_HW_QUEUE_DELBA: - /* We are reclaiming the last packet of the */ - /* aggregated HW queue */ - if (txq_id == tid_data->agg.txq_id && - q->read_ptr == q->write_ptr) { - u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number); - int tx_fifo = il4965_get_fifo_from_tid(tid); - D_HT("HW queue empty: continue DELBA flow\n"); - il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo); - tid_data->agg.state = IL_AGG_OFF; - ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid); - } - break; - case IL_EMPTYING_HW_QUEUE_ADDBA: - /* We are reclaiming the last packet of the queue */ - if (tid_data->tfds_in_queue == 0) { - D_HT("HW queue empty: continue ADDBA flow\n"); - tid_data->agg.state = IL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid); - } - break; - } - - return 0; -} - -static void -il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1) -{ - struct ieee80211_sta *sta; - struct il_station_priv *sta_priv; - - rcu_read_lock(); - sta = ieee80211_find_sta(il->vif, addr1); - if (sta) { - sta_priv = (void *)sta->drv_priv; - /* avoid atomic ops if this isn't a client */ - if (sta_priv->client && - atomic_dec_return(&sta_priv->pending_frames) == 0) - ieee80211_sta_block_awake(il->hw, sta, false); - } - rcu_read_unlock(); -} - -static void -il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - - if (!is_agg) - il4965_non_agg_tx_status(il, hdr->addr1); - - ieee80211_tx_status_irqsafe(il->hw, skb); -} - -int -il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx) -{ - struct il_tx_queue *txq = &il->txq[txq_id]; - struct il_queue *q = &txq->q; - int nfreed = 0; - struct ieee80211_hdr *hdr; - struct sk_buff *skb; - - if (idx >= q->n_bd || il_queue_used(q, idx) == 0) { - IL_ERR("Read idx for DMA queue txq id (%d), idx %d, " - "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd, - q->write_ptr, q->read_ptr); - return 0; - } - - for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; - q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) { - - skb = txq->skbs[txq->q.read_ptr]; - - if (WARN_ON_ONCE(skb == NULL)) - continue; - - hdr = (struct ieee80211_hdr *) skb->data; - if (ieee80211_is_data_qos(hdr->frame_control)) - nfreed++; - - il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE); - - txq->skbs[txq->q.read_ptr] = NULL; - il->ops->txq_free_tfd(il, txq); - } - return nfreed; -} - -/** - * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack - * - * Go through block-ack's bitmap of ACK'd frames, update driver's record of - * ACK vs. not. This gets sent to mac80211, then to rate scaling algo. - */ -static int -il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg, - struct il_compressed_ba_resp *ba_resp) -{ - int i, sh, ack; - u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl); - u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); - int successes = 0; - struct ieee80211_tx_info *info; - u64 bitmap, sent_bitmap; - - if (unlikely(!agg->wait_for_ba)) { - if (unlikely(ba_resp->bitmap)) - IL_ERR("Received BA when not expected\n"); - return -EINVAL; - } - - /* Mark that the expected block-ack response arrived */ - agg->wait_for_ba = 0; - D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl); - - /* Calculate shift to align block-ack bits with our Tx win bits */ - sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4); - if (sh < 0) /* tbw something is wrong with indices */ - sh += 0x100; - - if (agg->frame_count > (64 - sh)) { - D_TX_REPLY("more frames than bitmap size"); - return -1; - } - - /* don't use 64-bit values for now */ - bitmap = le64_to_cpu(ba_resp->bitmap) >> sh; - - /* check for success or failure according to the - * transmitted bitmap and block-ack bitmap */ - sent_bitmap = bitmap & agg->bitmap; - - /* For each frame attempted in aggregation, - * update driver's record of tx frame's status. */ - i = 0; - while (sent_bitmap) { - ack = sent_bitmap & 1ULL; - successes += ack; - D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK", - i, (agg->start_idx + i) & 0xff, agg->start_idx + i); - sent_bitmap >>= 1; - ++i; - } - - D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap); - - info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]); - memset(&info->status, 0, sizeof(info->status)); - info->flags |= IEEE80211_TX_STAT_ACK; - info->flags |= IEEE80211_TX_STAT_AMPDU; - info->status.ampdu_ack_len = successes; - info->status.ampdu_len = agg->frame_count; - il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info); - - return 0; -} - -static inline bool -il4965_is_tx_success(u32 status) -{ - status &= TX_STATUS_MSK; - return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE); -} - -static u8 -il4965_find_station(struct il_priv *il, const u8 *addr) -{ - int i; - int start = 0; - int ret = IL_INVALID_STATION; - unsigned long flags; - - if (il->iw_mode == NL80211_IFTYPE_ADHOC) - start = IL_STA_ID; - - if (is_broadcast_ether_addr(addr)) - return il->hw_params.bcast_id; - - spin_lock_irqsave(&il->sta_lock, flags); - for (i = start; i < il->hw_params.max_stations; i++) - if (il->stations[i].used && - ether_addr_equal(il->stations[i].sta.sta.addr, addr)) { - ret = i; - goto out; - } - - D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations); - -out: - /* - * It may be possible that more commands interacting with stations - * arrive before we completed processing the adding of - * station - */ - if (ret != IL_INVALID_STATION && - (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) || - ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) && - (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) { - IL_ERR("Requested station info for sta %d before ready.\n", - ret); - ret = IL_INVALID_STATION; - } - spin_unlock_irqrestore(&il->sta_lock, flags); - return ret; -} - -static int -il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr) -{ - if (il->iw_mode == NL80211_IFTYPE_STATION) - return IL_AP_ID; - else { - u8 *da = ieee80211_get_DA(hdr); - - return il4965_find_station(il, da); - } -} - -static inline u32 -il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp) -{ - return le32_to_cpup(&tx_resp->u.status + - tx_resp->frame_count) & IEEE80211_MAX_SN; -} - -static inline u32 -il4965_tx_status_to_mac80211(u32 status) -{ - status &= TX_STATUS_MSK; - - switch (status) { - case TX_STATUS_SUCCESS: - case TX_STATUS_DIRECT_DONE: - return IEEE80211_TX_STAT_ACK; - case TX_STATUS_FAIL_DEST_PS: - return IEEE80211_TX_STAT_TX_FILTERED; - default: - return 0; - } -} - -/** - * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue - */ -static int -il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg, - struct il4965_tx_resp *tx_resp, int txq_id, - u16 start_idx) -{ - u16 status; - struct agg_tx_status *frame_status = tx_resp->u.agg_status; - struct ieee80211_tx_info *info = NULL; - struct ieee80211_hdr *hdr = NULL; - u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); - int i, sh, idx; - u16 seq; - if (agg->wait_for_ba) - D_TX_REPLY("got tx response w/o block-ack\n"); - - agg->frame_count = tx_resp->frame_count; - agg->start_idx = start_idx; - agg->rate_n_flags = rate_n_flags; - agg->bitmap = 0; - - /* num frames attempted by Tx command */ - if (agg->frame_count == 1) { - /* Only one frame was attempted; no block-ack will arrive */ - status = le16_to_cpu(frame_status[0].status); - idx = start_idx; - - D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n", - agg->frame_count, agg->start_idx, idx); - - info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]); - info->status.rates[0].count = tx_resp->failure_frame + 1; - info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= il4965_tx_status_to_mac80211(status); - il4965_hwrate_to_tx_control(il, rate_n_flags, info); - - D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff, - tx_resp->failure_frame); - D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags); - - agg->wait_for_ba = 0; - } else { - /* Two or more frames were attempted; expect block-ack */ - u64 bitmap = 0; - int start = agg->start_idx; - struct sk_buff *skb; - - /* Construct bit-map of pending frames within Tx win */ - for (i = 0; i < agg->frame_count; i++) { - u16 sc; - status = le16_to_cpu(frame_status[i].status); - seq = le16_to_cpu(frame_status[i].sequence); - idx = SEQ_TO_IDX(seq); - txq_id = SEQ_TO_QUEUE(seq); - - if (status & - (AGG_TX_STATE_FEW_BYTES_MSK | - AGG_TX_STATE_ABORT_MSK)) - continue; - - D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n", - agg->frame_count, txq_id, idx); - - skb = il->txq[txq_id].skbs[idx]; - if (WARN_ON_ONCE(skb == NULL)) - return -1; - hdr = (struct ieee80211_hdr *) skb->data; - - sc = le16_to_cpu(hdr->seq_ctrl); - if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) { - IL_ERR("BUG_ON idx doesn't match seq control" - " idx=%d, seq_idx=%d, seq=%d\n", idx, - IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl); - return -1; - } - - D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx, - IEEE80211_SEQ_TO_SN(sc)); - - sh = idx - start; - if (sh > 64) { - sh = (start - idx) + 0xff; - bitmap = bitmap << sh; - sh = 0; - start = idx; - } else if (sh < -64) - sh = 0xff - (start - idx); - else if (sh < 0) { - sh = start - idx; - start = idx; - bitmap = bitmap << sh; - sh = 0; - } - bitmap |= 1ULL << sh; - D_TX_REPLY("start=%d bitmap=0x%llx\n", start, - (unsigned long long)bitmap); - } - - agg->bitmap = bitmap; - agg->start_idx = start; - D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n", - agg->frame_count, agg->start_idx, - (unsigned long long)agg->bitmap); - - if (bitmap) - agg->wait_for_ba = 1; - } - return 0; -} - -/** - * il4965_hdl_tx - Handle standard (non-aggregation) Tx response - */ -static void -il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int idx = SEQ_TO_IDX(sequence); - struct il_tx_queue *txq = &il->txq[txq_id]; - struct sk_buff *skb; - struct ieee80211_hdr *hdr; - struct ieee80211_tx_info *info; - struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; - u32 status = le32_to_cpu(tx_resp->u.status); - int uninitialized_var(tid); - int sta_id; - int freed; - u8 *qc = NULL; - unsigned long flags; - - if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) { - IL_ERR("Read idx for DMA queue txq_id (%d) idx %d " - "is out of range [0-%d] %d %d\n", txq_id, idx, - txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr); - return; - } - - txq->time_stamp = jiffies; - - skb = txq->skbs[txq->q.read_ptr]; - info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); - - hdr = (struct ieee80211_hdr *) skb->data; - if (ieee80211_is_data_qos(hdr->frame_control)) { - qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - } - - sta_id = il4965_get_ra_sta_id(il, hdr); - if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) { - IL_ERR("Station not known\n"); - return; - } - - /* - * Firmware will not transmit frame on passive channel, if it not yet - * received some valid frame on that channel. When this error happen - * we have to wait until firmware will unblock itself i.e. when we - * note received beacon or other frame. We unblock queues in - * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed. - */ - if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) && - il->iw_mode == NL80211_IFTYPE_STATION) { - il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE); - D_INFO("Stopped queues - RX waiting on passive channel\n"); - } - - spin_lock_irqsave(&il->sta_lock, flags); - if (txq->sched_retry) { - const u32 scd_ssn = il4965_get_scd_ssn(tx_resp); - struct il_ht_agg *agg = NULL; - WARN_ON(!qc); - - agg = &il->stations[sta_id].tid[tid].agg; - - il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx); - - /* check if BAR is needed */ - if (tx_resp->frame_count == 1 && - !il4965_is_tx_success(status)) - info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - - if (txq->q.read_ptr != (scd_ssn & 0xff)) { - idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd); - D_TX_REPLY("Retry scheduler reclaim scd_ssn " - "%d idx %d\n", scd_ssn, idx); - freed = il4965_tx_queue_reclaim(il, txq_id, idx); - if (qc) - il4965_free_tfds_in_queue(il, sta_id, tid, - freed); - - if (il->mac80211_registered && - il_queue_space(&txq->q) > txq->q.low_mark && - agg->state != IL_EMPTYING_HW_QUEUE_DELBA) - il_wake_queue(il, txq); - } - } else { - info->status.rates[0].count = tx_resp->failure_frame + 1; - info->flags |= il4965_tx_status_to_mac80211(status); - il4965_hwrate_to_tx_control(il, - le32_to_cpu(tx_resp->rate_n_flags), - info); - - D_TX_REPLY("TXQ %d status %s (0x%08x) " - "rate_n_flags 0x%x retries %d\n", txq_id, - il4965_get_tx_fail_reason(status), status, - le32_to_cpu(tx_resp->rate_n_flags), - tx_resp->failure_frame); - - freed = il4965_tx_queue_reclaim(il, txq_id, idx); - if (qc && likely(sta_id != IL_INVALID_STATION)) - il4965_free_tfds_in_queue(il, sta_id, tid, freed); - else if (sta_id == IL_INVALID_STATION) - D_TX_REPLY("Station not known\n"); - - if (il->mac80211_registered && - il_queue_space(&txq->q) > txq->q.low_mark) - il_wake_queue(il, txq); - } - if (qc && likely(sta_id != IL_INVALID_STATION)) - il4965_txq_check_empty(il, sta_id, tid, txq_id); - - il4965_check_abort_status(il, tx_resp->frame_count, status); - - spin_unlock_irqrestore(&il->sta_lock, flags); -} - -/** - * translate ucode response to mac80211 tx status control values - */ -void -il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, - struct ieee80211_tx_info *info) -{ - struct ieee80211_tx_rate *r = &info->status.rates[0]; - - info->status.antenna = - ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); - if (rate_n_flags & RATE_MCS_HT_MSK) - r->flags |= IEEE80211_TX_RC_MCS; - if (rate_n_flags & RATE_MCS_GF_MSK) - r->flags |= IEEE80211_TX_RC_GREEN_FIELD; - if (rate_n_flags & RATE_MCS_HT40_MSK) - r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - if (rate_n_flags & RATE_MCS_DUP_MSK) - r->flags |= IEEE80211_TX_RC_DUP_DATA; - if (rate_n_flags & RATE_MCS_SGI_MSK) - r->flags |= IEEE80211_TX_RC_SHORT_GI; - r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band); -} - -/** - * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA - * - * Handles block-acknowledge notification from device, which reports success - * of frames sent via aggregation. - */ -static void -il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba; - struct il_tx_queue *txq = NULL; - struct il_ht_agg *agg; - int idx; - int sta_id; - int tid; - unsigned long flags; - - /* "flow" corresponds to Tx queue */ - u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); - - /* "ssn" is start of block-ack Tx win, corresponds to idx - * (in Tx queue's circular buffer) of first TFD/frame in win */ - u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); - - if (scd_flow >= il->hw_params.max_txq_num) { - IL_ERR("BUG_ON scd_flow is bigger than number of queues\n"); - return; - } - - txq = &il->txq[scd_flow]; - sta_id = ba_resp->sta_id; - tid = ba_resp->tid; - agg = &il->stations[sta_id].tid[tid].agg; - if (unlikely(agg->txq_id != scd_flow)) { - /* - * FIXME: this is a uCode bug which need to be addressed, - * log the information and return for now! - * since it is possible happen very often and in order - * not to fill the syslog, don't enable the logging by default - */ - D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n", - scd_flow, agg->txq_id); - return; - } - - /* Find idx just before block-ack win */ - idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd); - - spin_lock_irqsave(&il->sta_lock, flags); - - D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n", - agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32, - ba_resp->sta_id); - D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = " - "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl, - (unsigned long long)le64_to_cpu(ba_resp->bitmap), - ba_resp->scd_flow, ba_resp->scd_ssn); - D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx, - (unsigned long long)agg->bitmap); - - /* Update driver's record of ACK vs. not for each frame in win */ - il4965_tx_status_reply_compressed_ba(il, agg, ba_resp); - - /* Release all TFDs before the SSN, i.e. all TFDs in front of - * block-ack win (we assume that they've been successfully - * transmitted ... if not, it's too late anyway). */ - if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) { - /* calculate mac80211 ampdu sw queue to wake */ - int freed = il4965_tx_queue_reclaim(il, scd_flow, idx); - il4965_free_tfds_in_queue(il, sta_id, tid, freed); - - if (il_queue_space(&txq->q) > txq->q.low_mark && - il->mac80211_registered && - agg->state != IL_EMPTYING_HW_QUEUE_DELBA) - il_wake_queue(il, txq); - - il4965_txq_check_empty(il, sta_id, tid, scd_flow); - } - - spin_unlock_irqrestore(&il->sta_lock, flags); -} - -#ifdef CONFIG_IWLEGACY_DEBUG -const char * -il4965_get_tx_fail_reason(u32 status) -{ -#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x -#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x - - switch (status & TX_STATUS_MSK) { - case TX_STATUS_SUCCESS: - return "SUCCESS"; - TX_STATUS_POSTPONE(DELAY); - TX_STATUS_POSTPONE(FEW_BYTES); - TX_STATUS_POSTPONE(QUIET_PERIOD); - TX_STATUS_POSTPONE(CALC_TTAK); - TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); - TX_STATUS_FAIL(SHORT_LIMIT); - TX_STATUS_FAIL(LONG_LIMIT); - TX_STATUS_FAIL(FIFO_UNDERRUN); - TX_STATUS_FAIL(DRAIN_FLOW); - TX_STATUS_FAIL(RFKILL_FLUSH); - TX_STATUS_FAIL(LIFE_EXPIRE); - TX_STATUS_FAIL(DEST_PS); - TX_STATUS_FAIL(HOST_ABORTED); - TX_STATUS_FAIL(BT_RETRY); - TX_STATUS_FAIL(STA_INVALID); - TX_STATUS_FAIL(FRAG_DROPPED); - TX_STATUS_FAIL(TID_DISABLE); - TX_STATUS_FAIL(FIFO_FLUSHED); - TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); - TX_STATUS_FAIL(PASSIVE_NO_RX); - TX_STATUS_FAIL(NO_BEACON_ON_RADAR); - } - - return "UNKNOWN"; - -#undef TX_STATUS_FAIL -#undef TX_STATUS_POSTPONE -} -#endif /* CONFIG_IWLEGACY_DEBUG */ - -static struct il_link_quality_cmd * -il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id) -{ - int i, r; - struct il_link_quality_cmd *link_cmd; - u32 rate_flags = 0; - __le32 rate_n_flags; - - link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL); - if (!link_cmd) { - IL_ERR("Unable to allocate memory for LQ cmd.\n"); - return NULL; - } - /* Set up the rate scaling to start at selected rate, fall back - * all the way down to 1M in IEEE order, and then spin on 1M */ - if (il->band == IEEE80211_BAND_5GHZ) - r = RATE_6M_IDX; - else - r = RATE_1M_IDX; - - if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - rate_flags |= - il4965_first_antenna(il->hw_params. - valid_tx_ant) << RATE_MCS_ANT_POS; - rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags); - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) - link_cmd->rs_table[i].rate_n_flags = rate_n_flags; - - link_cmd->general_params.single_stream_ant_msk = - il4965_first_antenna(il->hw_params.valid_tx_ant); - - link_cmd->general_params.dual_stream_ant_msk = - il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params. - valid_tx_ant); - if (!link_cmd->general_params.dual_stream_ant_msk) { - link_cmd->general_params.dual_stream_ant_msk = ANT_AB; - } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) { - link_cmd->general_params.dual_stream_ant_msk = - il->hw_params.valid_tx_ant; - } - - link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; - link_cmd->agg_params.agg_time_limit = - cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); - - link_cmd->sta_id = sta_id; - - return link_cmd; -} - -/* - * il4965_add_bssid_station - Add the special IBSS BSSID station - * - * Function sleeps. - */ -int -il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r) -{ - int ret; - u8 sta_id; - struct il_link_quality_cmd *link_cmd; - unsigned long flags; - - if (sta_id_r) - *sta_id_r = IL_INVALID_STATION; - - ret = il_add_station_common(il, addr, 0, NULL, &sta_id); - if (ret) { - IL_ERR("Unable to add station %pM\n", addr); - return ret; - } - - if (sta_id_r) - *sta_id_r = sta_id; - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].used |= IL_STA_LOCAL; - spin_unlock_irqrestore(&il->sta_lock, flags); - - /* Set up default rate scaling table in device's station table */ - link_cmd = il4965_sta_alloc_lq(il, sta_id); - if (!link_cmd) { - IL_ERR("Unable to initialize rate scaling for station %pM.\n", - addr); - return -ENOMEM; - } - - ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true); - if (ret) - IL_ERR("Link quality command failed (%d)\n", ret); - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].lq = link_cmd; - spin_unlock_irqrestore(&il->sta_lock, flags); - - return 0; -} - -static int -il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty) -{ - int i; - u8 buff[sizeof(struct il_wep_cmd) + - sizeof(struct il_wep_key) * WEP_KEYS_MAX]; - struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff; - size_t cmd_size = sizeof(struct il_wep_cmd); - struct il_host_cmd cmd = { - .id = C_WEPKEY, - .data = wep_cmd, - .flags = CMD_SYNC, - }; - bool not_empty = false; - - might_sleep(); - - memset(wep_cmd, 0, - cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX)); - - for (i = 0; i < WEP_KEYS_MAX; i++) { - u8 key_size = il->_4965.wep_keys[i].key_size; - - wep_cmd->key[i].key_idx = i; - if (key_size) { - wep_cmd->key[i].key_offset = i; - not_empty = true; - } else - wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; - - wep_cmd->key[i].key_size = key_size; - memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size); - } - - wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; - wep_cmd->num_keys = WEP_KEYS_MAX; - - cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX; - cmd.len = cmd_size; - - if (not_empty || send_if_empty) - return il_send_cmd(il, &cmd); - else - return 0; -} - -int -il4965_restore_default_wep_keys(struct il_priv *il) -{ - lockdep_assert_held(&il->mutex); - - return il4965_static_wepkey_cmd(il, false); -} - -int -il4965_remove_default_wep_key(struct il_priv *il, - struct ieee80211_key_conf *keyconf) -{ - int ret; - int idx = keyconf->keyidx; - - lockdep_assert_held(&il->mutex); - - D_WEP("Removing default WEP key: idx=%d\n", idx); - - memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key)); - if (il_is_rfkill(il)) { - D_WEP("Not sending C_WEPKEY command due to RFKILL.\n"); - /* but keys in device are clear anyway so return success */ - return 0; - } - ret = il4965_static_wepkey_cmd(il, 1); - D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret); - - return ret; -} - -int -il4965_set_default_wep_key(struct il_priv *il, - struct ieee80211_key_conf *keyconf) -{ - int ret; - int len = keyconf->keylen; - int idx = keyconf->keyidx; - - lockdep_assert_held(&il->mutex); - - if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) { - D_WEP("Bad WEP key length %d\n", keyconf->keylen); - return -EINVAL; - } - - keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; - keyconf->hw_key_idx = HW_KEY_DEFAULT; - il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher; - - il->_4965.wep_keys[idx].key_size = len; - memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len); - - ret = il4965_static_wepkey_cmd(il, false); - - D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret); - return ret; -} - -static int -il4965_set_wep_dynamic_key_info(struct il_priv *il, - struct ieee80211_key_conf *keyconf, u8 sta_id) -{ - unsigned long flags; - __le16 key_flags = 0; - struct il_addsta_cmd sta_cmd; - - lockdep_assert_held(&il->mutex); - - keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV; - - key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (keyconf->keylen == WEP_KEY_LEN_128) - key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; - - if (sta_id == il->hw_params.bcast_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - spin_lock_irqsave(&il->sta_lock, flags); - - il->stations[sta_id].keyinfo.cipher = keyconf->cipher; - il->stations[sta_id].keyinfo.keylen = keyconf->keylen; - il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx; - - memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); - - memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key, - keyconf->keylen); - - if ((il->stations[sta_id].sta.key. - key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) - il->stations[sta_id].sta.key.key_offset = - il_get_free_ucode_key_idx(il); - /* else, we are overriding an existing key => no need to allocated room - * in uCode. */ - - WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, - "no space for a new key"); - - il->stations[sta_id].sta.key.key_flags = key_flags; - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - memcpy(&sta_cmd, &il->stations[sta_id].sta, - sizeof(struct il_addsta_cmd)); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return il_send_add_sta(il, &sta_cmd, CMD_SYNC); -} - -static int -il4965_set_ccmp_dynamic_key_info(struct il_priv *il, - struct ieee80211_key_conf *keyconf, u8 sta_id) -{ - unsigned long flags; - __le16 key_flags = 0; - struct il_addsta_cmd sta_cmd; - - lockdep_assert_held(&il->mutex); - - key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == il->hw_params.bcast_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].keyinfo.cipher = keyconf->cipher; - il->stations[sta_id].keyinfo.keylen = keyconf->keylen; - - memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen); - - memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen); - - if ((il->stations[sta_id].sta.key. - key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) - il->stations[sta_id].sta.key.key_offset = - il_get_free_ucode_key_idx(il); - /* else, we are overriding an existing key => no need to allocated room - * in uCode. */ - - WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, - "no space for a new key"); - - il->stations[sta_id].sta.key.key_flags = key_flags; - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - memcpy(&sta_cmd, &il->stations[sta_id].sta, - sizeof(struct il_addsta_cmd)); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return il_send_add_sta(il, &sta_cmd, CMD_SYNC); -} - -static int -il4965_set_tkip_dynamic_key_info(struct il_priv *il, - struct ieee80211_key_conf *keyconf, u8 sta_id) -{ - unsigned long flags; - int ret = 0; - __le16 key_flags = 0; - - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == il->hw_params.bcast_id) - key_flags |= STA_KEY_MULTICAST_MSK; - - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - - spin_lock_irqsave(&il->sta_lock, flags); - - il->stations[sta_id].keyinfo.cipher = keyconf->cipher; - il->stations[sta_id].keyinfo.keylen = 16; - - if ((il->stations[sta_id].sta.key. - key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) - il->stations[sta_id].sta.key.key_offset = - il_get_free_ucode_key_idx(il); - /* else, we are overriding an existing key => no need to allocated room - * in uCode. */ - - WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, - "no space for a new key"); - - il->stations[sta_id].sta.key.key_flags = key_flags; - - /* This copy is acutally not needed: we get the key with each TX */ - memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16); - - memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16); - - spin_unlock_irqrestore(&il->sta_lock, flags); - - return ret; -} - -void -il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) -{ - u8 sta_id; - unsigned long flags; - int i; - - if (il_scan_cancel(il)) { - /* cancel scan failed, just live w/ bad key and rely - briefly on SW decryption */ - return; - } - - sta_id = il_sta_id_or_broadcast(il, sta); - if (sta_id == IL_INVALID_STATION) - return; - - spin_lock_irqsave(&il->sta_lock, flags); - - il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; - - for (i = 0; i < 5; i++) - il->stations[sta_id].sta.key.tkip_rx_ttak[i] = - cpu_to_le16(phase1key[i]); - - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); - - spin_unlock_irqrestore(&il->sta_lock, flags); -} - -int -il4965_remove_dynamic_key(struct il_priv *il, - struct ieee80211_key_conf *keyconf, u8 sta_id) -{ - unsigned long flags; - u16 key_flags; - u8 keyidx; - struct il_addsta_cmd sta_cmd; - - lockdep_assert_held(&il->mutex); - - il->_4965.key_mapping_keys--; - - spin_lock_irqsave(&il->sta_lock, flags); - key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags); - keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3; - - D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); - - if (keyconf->keyidx != keyidx) { - /* We need to remove a key with idx different that the one - * in the uCode. This means that the key we need to remove has - * been replaced by another one with different idx. - * Don't do anything and return ok - */ - spin_unlock_irqrestore(&il->sta_lock, flags); - return 0; - } - - if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) { - IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx, - key_flags); - spin_unlock_irqrestore(&il->sta_lock, flags); - return 0; - } - - if (!test_and_clear_bit - (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table)) - IL_ERR("idx %d not used in uCode key table.\n", - il->stations[sta_id].sta.key.key_offset); - memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key)); - memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo)); - il->stations[sta_id].sta.key.key_flags = - STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID; - il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx; - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - - if (il_is_rfkill(il)) { - D_WEP - ("Not sending C_ADD_STA command because RFKILL enabled.\n"); - spin_unlock_irqrestore(&il->sta_lock, flags); - return 0; - } - memcpy(&sta_cmd, &il->stations[sta_id].sta, - sizeof(struct il_addsta_cmd)); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return il_send_add_sta(il, &sta_cmd, CMD_SYNC); -} - -int -il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf, - u8 sta_id) -{ - int ret; - - lockdep_assert_held(&il->mutex); - - il->_4965.key_mapping_keys++; - keyconf->hw_key_idx = HW_KEY_DYNAMIC; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - ret = - il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id); - break; - case WLAN_CIPHER_SUITE_TKIP: - ret = - il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id); - break; - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id); - break; - default: - IL_ERR("Unknown alg: %s cipher = %x\n", __func__, - keyconf->cipher); - ret = -EINVAL; - } - - D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n", - keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret); - - return ret; -} - -/** - * il4965_alloc_bcast_station - add broadcast station into driver's station table. - * - * This adds the broadcast station into the driver's station table - * and marks it driver active, so that it will be restored to the - * device at the next best time. - */ -int -il4965_alloc_bcast_station(struct il_priv *il) -{ - struct il_link_quality_cmd *link_cmd; - unsigned long flags; - u8 sta_id; - - spin_lock_irqsave(&il->sta_lock, flags); - sta_id = il_prep_station(il, il_bcast_addr, false, NULL); - if (sta_id == IL_INVALID_STATION) { - IL_ERR("Unable to prepare broadcast station\n"); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return -EINVAL; - } - - il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE; - il->stations[sta_id].used |= IL_STA_BCAST; - spin_unlock_irqrestore(&il->sta_lock, flags); - - link_cmd = il4965_sta_alloc_lq(il, sta_id); - if (!link_cmd) { - IL_ERR - ("Unable to initialize rate scaling for bcast station.\n"); - return -ENOMEM; - } - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].lq = link_cmd; - spin_unlock_irqrestore(&il->sta_lock, flags); - - return 0; -} - -/** - * il4965_update_bcast_station - update broadcast station's LQ command - * - * Only used by iwl4965. Placed here to have all bcast station management - * code together. - */ -static int -il4965_update_bcast_station(struct il_priv *il) -{ - unsigned long flags; - struct il_link_quality_cmd *link_cmd; - u8 sta_id = il->hw_params.bcast_id; - - link_cmd = il4965_sta_alloc_lq(il, sta_id); - if (!link_cmd) { - IL_ERR("Unable to initialize rate scaling for bcast sta.\n"); - return -ENOMEM; - } - - spin_lock_irqsave(&il->sta_lock, flags); - if (il->stations[sta_id].lq) - kfree(il->stations[sta_id].lq); - else - D_INFO("Bcast sta rate scaling has not been initialized.\n"); - il->stations[sta_id].lq = link_cmd; - spin_unlock_irqrestore(&il->sta_lock, flags); - - return 0; -} - -int -il4965_update_bcast_stations(struct il_priv *il) -{ - return il4965_update_bcast_station(il); -} - -/** - * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table - */ -int -il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid) -{ - unsigned long flags; - struct il_addsta_cmd sta_cmd; - - lockdep_assert_held(&il->mutex); - - /* Remove "disable" flag, to enable Tx for this TID */ - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; - il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &il->stations[sta_id].sta, - sizeof(struct il_addsta_cmd)); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return il_send_add_sta(il, &sta_cmd, CMD_SYNC); -} - -int -il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid, - u16 ssn) -{ - unsigned long flags; - int sta_id; - struct il_addsta_cmd sta_cmd; - - lockdep_assert_held(&il->mutex); - - sta_id = il_sta_id(sta); - if (sta_id == IL_INVALID_STATION) - return -ENXIO; - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].sta.station_flags_msk = 0; - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; - il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid; - il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &il->stations[sta_id].sta, - sizeof(struct il_addsta_cmd)); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return il_send_add_sta(il, &sta_cmd, CMD_SYNC); -} - -int -il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid) -{ - unsigned long flags; - int sta_id; - struct il_addsta_cmd sta_cmd; - - lockdep_assert_held(&il->mutex); - - sta_id = il_sta_id(sta); - if (sta_id == IL_INVALID_STATION) { - IL_ERR("Invalid station for AGG tid %d\n", tid); - return -ENXIO; - } - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].sta.station_flags_msk = 0; - il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; - il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid; - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &il->stations[sta_id].sta, - sizeof(struct il_addsta_cmd)); - spin_unlock_irqrestore(&il->sta_lock, flags); - - return il_send_add_sta(il, &sta_cmd, CMD_SYNC); -} - -void -il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt) -{ - unsigned long flags; - - spin_lock_irqsave(&il->sta_lock, flags); - il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK; - il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK; - il->stations[sta_id].sta.sta.modify_mask = - STA_MODIFY_SLEEP_TX_COUNT_MSK; - il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt); - il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC); - spin_unlock_irqrestore(&il->sta_lock, flags); - -} - -void -il4965_update_chain_flags(struct il_priv *il) -{ - if (il->ops->set_rxon_chain) { - il->ops->set_rxon_chain(il); - if (il->active.rx_chain != il->staging.rx_chain) - il_commit_rxon(il); - } -} - -static void -il4965_clear_free_frames(struct il_priv *il) -{ - struct list_head *element; - - D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count); - - while (!list_empty(&il->free_frames)) { - element = il->free_frames.next; - list_del(element); - kfree(list_entry(element, struct il_frame, list)); - il->frames_count--; - } - - if (il->frames_count) { - IL_WARN("%d frames still in use. Did we lose one?\n", - il->frames_count); - il->frames_count = 0; - } -} - -static struct il_frame * -il4965_get_free_frame(struct il_priv *il) -{ - struct il_frame *frame; - struct list_head *element; - if (list_empty(&il->free_frames)) { - frame = kzalloc(sizeof(*frame), GFP_KERNEL); - if (!frame) { - IL_ERR("Could not allocate frame!\n"); - return NULL; - } - - il->frames_count++; - return frame; - } - - element = il->free_frames.next; - list_del(element); - return list_entry(element, struct il_frame, list); -} - -static void -il4965_free_frame(struct il_priv *il, struct il_frame *frame) -{ - memset(frame, 0, sizeof(*frame)); - list_add(&frame->list, &il->free_frames); -} - -static u32 -il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr, - int left) -{ - lockdep_assert_held(&il->mutex); - - if (!il->beacon_skb) - return 0; - - if (il->beacon_skb->len > left) - return 0; - - memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len); - - return il->beacon_skb->len; -} - -/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ -static void -il4965_set_beacon_tim(struct il_priv *il, - struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon, - u32 frame_size) -{ - u16 tim_idx; - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; - - /* - * The idx is relative to frame start but we start looking at the - * variable-length part of the beacon. - */ - tim_idx = mgmt->u.beacon.variable - beacon; - - /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ - while ((tim_idx < (frame_size - 2)) && - (beacon[tim_idx] != WLAN_EID_TIM)) - tim_idx += beacon[tim_idx + 1] + 2; - - /* If TIM field was found, set variables */ - if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { - tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); - tx_beacon_cmd->tim_size = beacon[tim_idx + 1]; - } else - IL_WARN("Unable to find TIM Element in beacon\n"); -} - -static unsigned int -il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame) -{ - struct il_tx_beacon_cmd *tx_beacon_cmd; - u32 frame_size; - u32 rate_flags; - u32 rate; - /* - * We have to set up the TX command, the TX Beacon command, and the - * beacon contents. - */ - - lockdep_assert_held(&il->mutex); - - if (!il->beacon_enabled) { - IL_ERR("Trying to build beacon without beaconing enabled\n"); - return 0; - } - - /* Initialize memory */ - tx_beacon_cmd = &frame->u.beacon; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - /* Set up TX beacon contents */ - frame_size = - il4965_fill_beacon_frame(il, tx_beacon_cmd->frame, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE)) - return 0; - if (!frame_size) - return 0; - - /* Set up TX command fields */ - tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size); - tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - tx_beacon_cmd->tx.tx_flags = - TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK | - TX_CMD_FLG_STA_RATE_MSK; - - /* Set up TX beacon command fields */ - il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame, - frame_size); - - /* Set up packet rate and flags */ - rate = il_get_lowest_plcp(il); - il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant); - rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS; - if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE)) - rate_flags |= RATE_MCS_CCK_MSK; - tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags); - - return sizeof(*tx_beacon_cmd) + frame_size; -} - -int -il4965_send_beacon_cmd(struct il_priv *il) -{ - struct il_frame *frame; - unsigned int frame_size; - int rc; - - frame = il4965_get_free_frame(il); - if (!frame) { - IL_ERR("Could not obtain free frame buffer for beacon " - "command.\n"); - return -ENOMEM; - } - - frame_size = il4965_hw_get_beacon_cmd(il, frame); - if (!frame_size) { - IL_ERR("Error configuring the beacon command\n"); - il4965_free_frame(il, frame); - return -EINVAL; - } - - rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]); - - il4965_free_frame(il, frame); - - return rc; -} - -static inline dma_addr_t -il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx) -{ - struct il_tfd_tb *tb = &tfd->tbs[idx]; - - dma_addr_t addr = get_unaligned_le32(&tb->lo); - if (sizeof(dma_addr_t) > sizeof(u32)) - addr |= - ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << - 16; - - return addr; -} - -static inline u16 -il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx) -{ - struct il_tfd_tb *tb = &tfd->tbs[idx]; - - return le16_to_cpu(tb->hi_n_len) >> 4; -} - -static inline void -il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len) -{ - struct il_tfd_tb *tb = &tfd->tbs[idx]; - u16 hi_n_len = len << 4; - - put_unaligned_le32(addr, &tb->lo); - if (sizeof(dma_addr_t) > sizeof(u32)) - hi_n_len |= ((addr >> 16) >> 16) & 0xF; - - tb->hi_n_len = cpu_to_le16(hi_n_len); - - tfd->num_tbs = idx + 1; -} - -static inline u8 -il4965_tfd_get_num_tbs(struct il_tfd *tfd) -{ - return tfd->num_tbs & 0x1f; -} - -/** - * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] - * @il - driver ilate data - * @txq - tx queue - * - * Does NOT advance any TFD circular buffer read/write idxes - * Does NOT free the TFD itself (which is within circular buffer) - */ -void -il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq) -{ - struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds; - struct il_tfd *tfd; - struct pci_dev *dev = il->pci_dev; - int idx = txq->q.read_ptr; - int i; - int num_tbs; - - tfd = &tfd_tmp[idx]; - - /* Sanity check on number of chunks */ - num_tbs = il4965_tfd_get_num_tbs(tfd); - - if (num_tbs >= IL_NUM_OF_TBS) { - IL_ERR("Too many chunks: %i\n", num_tbs); - /* @todo issue fatal error, it is quite serious situation */ - return; - } - - /* Unmap tx_cmd */ - if (num_tbs) - pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping), - dma_unmap_len(&txq->meta[idx], len), - PCI_DMA_BIDIRECTIONAL); - - /* Unmap chunks, if any. */ - for (i = 1; i < num_tbs; i++) - pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i), - il4965_tfd_tb_get_len(tfd, i), - PCI_DMA_TODEVICE); - - /* free SKB */ - if (txq->skbs) { - struct sk_buff *skb = txq->skbs[txq->q.read_ptr]; - - /* can be called from irqs-disabled context */ - if (skb) { - dev_kfree_skb_any(skb); - txq->skbs[txq->q.read_ptr] = NULL; - } - } -} - -int -il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, - dma_addr_t addr, u16 len, u8 reset, u8 pad) -{ - struct il_queue *q; - struct il_tfd *tfd, *tfd_tmp; - u32 num_tbs; - - q = &txq->q; - tfd_tmp = (struct il_tfd *)txq->tfds; - tfd = &tfd_tmp[q->write_ptr]; - - if (reset) - memset(tfd, 0, sizeof(*tfd)); - - num_tbs = il4965_tfd_get_num_tbs(tfd); - - /* Each TFD can point to a maximum 20 Tx buffers */ - if (num_tbs >= IL_NUM_OF_TBS) { - IL_ERR("Error can not send more than %d chunks\n", - IL_NUM_OF_TBS); - return -EINVAL; - } - - BUG_ON(addr & ~DMA_BIT_MASK(36)); - if (unlikely(addr & ~IL_TX_DMA_MASK)) - IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr); - - il4965_tfd_set_tb(tfd, num_tbs, addr, len); - - return 0; -} - -/* - * Tell nic where to find circular buffer of Tx Frame Descriptors for - * given Tx queue, and enable the DMA channel used for that queue. - * - * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA - * channels supported in hardware. - */ -int -il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq) -{ - int txq_id = txq->q.id; - - /* Circular buffer (TFD queue in DRAM) physical base address */ - il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); - - return 0; -} - -/****************************************************************************** - * - * Generic RX handler implementations - * - ******************************************************************************/ -static void -il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct il_alive_resp *palive; - struct delayed_work *pwork; - - palive = &pkt->u.alive_frame; - - D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, palive->ver_subtype); - - if (palive->ver_subtype == INITIALIZE_SUBTYPE) { - D_INFO("Initialization Alive received.\n"); - memcpy(&il->card_alive_init, &pkt->u.alive_frame, - sizeof(struct il_init_alive_resp)); - pwork = &il->init_alive_start; - } else { - D_INFO("Runtime Alive received.\n"); - memcpy(&il->card_alive, &pkt->u.alive_frame, - sizeof(struct il_alive_resp)); - pwork = &il->alive_start; - } - - /* We delay the ALIVE response by 5ms to - * give the HW RF Kill time to activate... */ - if (palive->is_valid == UCODE_VALID_OK) - queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5)); - else - IL_WARN("uCode did not respond OK.\n"); -} - -/** - * il4965_bg_stats_periodic - Timer callback to queue stats - * - * This callback is provided in order to send a stats request. - * - * This timer function is continually reset to execute within - * 60 seconds since the last N_STATS was received. We need to - * ensure we receive the stats in order to update the temperature - * used for calibrating the TXPOWER. - */ -static void -il4965_bg_stats_periodic(unsigned long data) -{ - struct il_priv *il = (struct il_priv *)data; - - if (test_bit(S_EXIT_PENDING, &il->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!il_is_ready_rf(il)) - return; - - il_send_stats_request(il, CMD_ASYNC, false); -} - -static void -il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - struct il4965_beacon_notif *beacon = - (struct il4965_beacon_notif *)pkt->u.raw; -#ifdef CONFIG_IWLEGACY_DEBUG - u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); - - D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n", - le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate); -#endif - il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); -} - -static void -il4965_perform_ct_kill_task(struct il_priv *il) -{ - unsigned long flags; - - D_POWER("Stop all queues\n"); - - if (il->mac80211_registered) - ieee80211_stop_queues(il->hw); - - _il_wr(il, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - _il_rd(il, CSR_UCODE_DRV_GP1); - - spin_lock_irqsave(&il->reg_lock, flags); - if (likely(_il_grab_nic_access(il))) - _il_release_nic_access(il); - spin_unlock_irqrestore(&il->reg_lock, flags); -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static void -il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb) -{ - struct il_rx_pkt *pkt = rxb_addr(rxb); - u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags); - unsigned long status = il->status; - - D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On", - (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached"); - - if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) { - - _il_wr(il, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - if (!(flags & RXON_CARD_DISABLED)) { - _il_wr(il, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - il_wr(il, HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - } - } - - if (flags & CT_CARD_DISABLED) - il4965_perform_ct_kill_task(il); - - if (flags & HW_CARD_DISABLED) - set_bit(S_RFKILL, &il->status); - else - clear_bit(S_RFKILL, &il->status); - - if (!(flags & RXON_CARD_DISABLED)) - il_scan_cancel(il); - - if ((test_bit(S_RFKILL, &status) != - test_bit(S_RFKILL, &il->status))) - wiphy_rfkill_set_hw_state(il->hw->wiphy, - test_bit(S_RFKILL, &il->status)); - else - wake_up(&il->wait_command_queue); -} - -/** - * il4965_setup_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - * - * This function chains into the hardware specific files for them to setup - * any hardware specific handlers as well. - */ -static void -il4965_setup_handlers(struct il_priv *il) -{ - il->handlers[N_ALIVE] = il4965_hdl_alive; - il->handlers[N_ERROR] = il_hdl_error; - il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa; - il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement; - il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep; - il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats; - il->handlers[N_BEACON] = il4965_hdl_beacon; - - /* - * The same handler is used for both the REPLY to a discrete - * stats request from the host as well as for the periodic - * stats notifications (after received beacons) from the uCode. - */ - il->handlers[C_STATS] = il4965_hdl_c_stats; - il->handlers[N_STATS] = il4965_hdl_stats; - - il_setup_rx_scan_handlers(il); - - /* status change handler */ - il->handlers[N_CARD_STATE] = il4965_hdl_card_state; - - il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon; - /* Rx handlers */ - il->handlers[N_RX_PHY] = il4965_hdl_rx_phy; - il->handlers[N_RX_MPDU] = il4965_hdl_rx; - il->handlers[N_RX] = il4965_hdl_rx; - /* block ack */ - il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba; - /* Tx response */ - il->handlers[C_TX] = il4965_hdl_tx; -} - -/** - * il4965_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the il->handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -void -il4965_rx_handle(struct il_priv *il) -{ - struct il_rx_buf *rxb; - struct il_rx_pkt *pkt; - struct il_rx_queue *rxq = &il->rxq; - u32 r, i; - int reclaim; - unsigned long flags; - u8 fill_rx = 0; - u32 count = 8; - int total_empty; - - /* uCode's read idx (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - D_RX("r = %d, i = %d\n", r, i); - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - int len; - - rxb = rxq->queue[i]; - - /* If an RXB doesn't have a Rx queue slot associated with it, - * then a bug has been introduced in the queue refilling - * routines -- catch it here */ - BUG_ON(rxb == NULL); - - rxq->queue[i] = NULL; - - pci_unmap_page(il->pci_dev, rxb->page_dma, - PAGE_SIZE << il->hw_params.rx_page_order, - PCI_DMA_FROMDEVICE); - pkt = rxb_addr(rxb); - - len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - - reclaim = il_need_reclaim(il, pkt); - - /* Based on type of command response or notification, - * handle those that need handling via function in - * handlers table. See il4965_setup_handlers() */ - if (il->handlers[pkt->hdr.cmd]) { - D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i, - il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - il->isr_stats.handlers[pkt->hdr.cmd]++; - il->handlers[pkt->hdr.cmd] (il, rxb); - } else { - /* No handling needed */ - D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r, - i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - } - - /* - * XXX: After here, we should always check rxb->page - * against NULL before touching it or its virtual - * memory (pkt). Because some handler might have - * already taken or freed the pages. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking il_send_cmd() - * as we reclaim the driver command queue */ - if (rxb->page) - il_tx_cmd_complete(il, rxb); - else - IL_WARN("Claim null rxb?\n"); - } - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = - pci_map_page(il->pci_dev, rxb->page, 0, - PAGE_SIZE << il->hw_params. - rx_page_order, PCI_DMA_FROMDEVICE); - - if (unlikely(pci_dma_mapping_error(il->pci_dev, - rxb->page_dma))) { - __il_free_pages(il, rxb->page); - rxb->page = NULL; - list_add_tail(&rxb->list, &rxq->rx_used); - } else { - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } - } else - list_add_tail(&rxb->list, &rxq->rx_used); - - spin_unlock_irqrestore(&rxq->lock, flags); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - il4965_rx_replenish_now(il); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - il4965_rx_replenish_now(il); - else - il4965_rx_queue_restock(il); -} - -/* call this function to flush any scheduled tasklet */ -static inline void -il4965_synchronize_irq(struct il_priv *il) -{ - /* wait to make sure we flush pending tasklet */ - synchronize_irq(il->pci_dev->irq); - tasklet_kill(&il->irq_tasklet); -} - -static void -il4965_irq_tasklet(struct il_priv *il) -{ - u32 inta, handled = 0; - u32 inta_fh; - unsigned long flags; - u32 i; -#ifdef CONFIG_IWLEGACY_DEBUG - u32 inta_mask; -#endif - - spin_lock_irqsave(&il->lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - * and will clear only when CSR_FH_INT_STATUS gets cleared. */ - inta = _il_rd(il, CSR_INT); - _il_wr(il, CSR_INT, inta); - - /* Ack/clear/reset pending flow-handler (DMA) interrupts. - * Any new interrupts that happen after this, either while we're - * in this tasklet, or later, will show up in next ISR/tasklet. */ - inta_fh = _il_rd(il, CSR_FH_INT_STATUS); - _il_wr(il, CSR_FH_INT_STATUS, inta_fh); - -#ifdef CONFIG_IWLEGACY_DEBUG - if (il_get_debug_level(il) & IL_DL_ISR) { - /* just for debug */ - inta_mask = _il_rd(il, CSR_INT_MASK); - D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, - inta_mask, inta_fh); - } -#endif - - spin_unlock_irqrestore(&il->lock, flags); - - /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not - * atomic, make sure that inta covers all the interrupts that - * we've discovered, even if FH interrupt came in just after - * reading CSR_INT. */ - if (inta_fh & CSR49_FH_INT_RX_MASK) - inta |= CSR_INT_BIT_FH_RX; - if (inta_fh & CSR49_FH_INT_TX_MASK) - inta |= CSR_INT_BIT_FH_TX; - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IL_ERR("Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - il_disable_interrupts(il); - - il->isr_stats.hw++; - il_irq_handle_error(il); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } -#ifdef CONFIG_IWLEGACY_DEBUG - if (il_get_debug_level(il) & (IL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - D_ISR("Scheduler finished to transmit " - "the frame/frames.\n"); - il->isr_stats.sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - D_ISR("Alive interrupt\n"); - il->isr_stats.alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - int hw_rf_kill = 0; - - if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)) - hw_rf_kill = 1; - - IL_WARN("RF_KILL bit toggled to %s.\n", - hw_rf_kill ? "disable radio" : "enable radio"); - - il->isr_stats.rfkill++; - - /* driver only loads ucode once setting the interface up. - * the driver allows loading the ucode even if the radio - * is killed. Hence update the killswitch state here. The - * rfkill handler will care about restarting if needed. - */ - if (hw_rf_kill) { - set_bit(S_RFKILL, &il->status); - } else { - clear_bit(S_RFKILL, &il->status); - il_force_reset(il, true); - } - wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IL_ERR("Microcode CT kill error detected.\n"); - il->isr_stats.ctkill++; - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n", - inta); - il->isr_stats.sw++; - il_irq_handle_error(il); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* - * uCode wakes up after power-down sleep. - * Tell device about any new tx or host commands enqueued, - * and about any Rx buffers made available while asleep. - */ - if (inta & CSR_INT_BIT_WAKEUP) { - D_ISR("Wakeup interrupt\n"); - il_rx_queue_update_write_ptr(il, &il->rxq); - for (i = 0; i < il->hw_params.max_txq_num; i++) - il_txq_update_write_ptr(il, &il->txq[i]); - il->isr_stats.wakeup++; - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - il4965_rx_handle(il); - il->isr_stats.rx++; - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - } - - /* This "Tx" DMA channel is used only for loading uCode */ - if (inta & CSR_INT_BIT_FH_TX) { - D_ISR("uCode load interrupt\n"); - il->isr_stats.tx++; - handled |= CSR_INT_BIT_FH_TX; - /* Wake up uCode load routine, now that load is complete */ - il->ucode_write_complete = 1; - wake_up(&il->wait_command_queue); - } - - if (inta & ~handled) { - IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled); - il->isr_stats.unhandled++; - } - - if (inta & ~(il->inta_mask)) { - IL_WARN("Disabled INTA bits 0x%08x were pending\n", - inta & ~il->inta_mask); - IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(S_INT_ENABLED, &il->status)) - il_enable_interrupts(il); - /* Re-enable RF_KILL if it occurred */ - else if (handled & CSR_INT_BIT_RF_KILL) - il_enable_rfkill_int(il); - -#ifdef CONFIG_IWLEGACY_DEBUG - if (il_get_debug_level(il) & (IL_DL_ISR)) { - inta = _il_rd(il, CSR_INT); - inta_mask = _il_rd(il, CSR_INT_MASK); - inta_fh = _il_rd(il, CSR_FH_INT_STATUS); - D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, " - "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags); - } -#endif -} - -/***************************************************************************** - * - * sysfs attributes - * - *****************************************************************************/ - -#ifdef CONFIG_IWLEGACY_DEBUG - -/* - * The following adds a new attribute to the sysfs representation - * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/) - * used for controlling the debug level. - * - * See the level definitions in iwl for details. - * - * The debug_level being managed using sysfs below is a per device debug - * level that is used instead of the global debug level if it (the per - * device debug level) is set. - */ -static ssize_t -il4965_show_debug_level(struct device *d, struct device_attribute *attr, - char *buf) -{ - struct il_priv *il = dev_get_drvdata(d); - return sprintf(buf, "0x%08X\n", il_get_debug_level(il)); -} - -static ssize_t -il4965_store_debug_level(struct device *d, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct il_priv *il = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = kstrtoul(buf, 0, &val); - if (ret) - IL_ERR("%s is not in hex or decimal form.\n", buf); - else - il->debug_level = val; - - return strnlen(buf, count); -} - -static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il4965_show_debug_level, - il4965_store_debug_level); - -#endif /* CONFIG_IWLEGACY_DEBUG */ - -static ssize_t -il4965_show_temperature(struct device *d, struct device_attribute *attr, - char *buf) -{ - struct il_priv *il = dev_get_drvdata(d); - - if (!il_is_alive(il)) - return -EAGAIN; - - return sprintf(buf, "%d\n", il->temperature); -} - -static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL); - -static ssize_t -il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf) -{ - struct il_priv *il = dev_get_drvdata(d); - - if (!il_is_ready_rf(il)) - return sprintf(buf, "off\n"); - else - return sprintf(buf, "%d\n", il->tx_power_user_lmt); -} - -static ssize_t -il4965_store_tx_power(struct device *d, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct il_priv *il = dev_get_drvdata(d); - unsigned long val; - int ret; - - ret = kstrtoul(buf, 10, &val); - if (ret) - IL_INFO("%s is not in decimal form.\n", buf); - else { - ret = il_set_tx_power(il, val, false); - if (ret) - IL_ERR("failed setting tx power (0x%08x).\n", ret); - else - ret = count; - } - return ret; -} - -static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il4965_show_tx_power, - il4965_store_tx_power); - -static struct attribute *il_sysfs_entries[] = { - &dev_attr_temperature.attr, - &dev_attr_tx_power.attr, -#ifdef CONFIG_IWLEGACY_DEBUG - &dev_attr_debug_level.attr, -#endif - NULL -}; - -static struct attribute_group il_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = il_sysfs_entries, -}; - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static void -il4965_dealloc_ucode_pci(struct il_priv *il) -{ - il_free_fw_desc(il->pci_dev, &il->ucode_code); - il_free_fw_desc(il->pci_dev, &il->ucode_data); - il_free_fw_desc(il->pci_dev, &il->ucode_data_backup); - il_free_fw_desc(il->pci_dev, &il->ucode_init); - il_free_fw_desc(il->pci_dev, &il->ucode_init_data); - il_free_fw_desc(il->pci_dev, &il->ucode_boot); -} - -static void -il4965_nic_start(struct il_priv *il) -{ - /* Remove all resets to allow NIC to operate */ - _il_wr(il, CSR_RESET, 0); -} - -static void il4965_ucode_callback(const struct firmware *ucode_raw, - void *context); -static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length); - -static int __must_check -il4965_request_firmware(struct il_priv *il, bool first) -{ - const char *name_pre = il->cfg->fw_name_pre; - char tag[8]; - - if (first) { - il->fw_idx = il->cfg->ucode_api_max; - sprintf(tag, "%d", il->fw_idx); - } else { - il->fw_idx--; - sprintf(tag, "%d", il->fw_idx); - } - - if (il->fw_idx < il->cfg->ucode_api_min) { - IL_ERR("no suitable firmware found!\n"); - return -ENOENT; - } - - sprintf(il->firmware_name, "/*(DEBLOBBED)*/"); - - D_INFO("attempting to load firmware '%s'\n", il->firmware_name); - - return reject_firmware_nowait(THIS_MODULE, 1, il->firmware_name, - &il->pci_dev->dev, GFP_KERNEL, il, - il4965_ucode_callback); -} - -struct il4965_firmware_pieces { - const void *inst, *data, *init, *init_data, *boot; - size_t inst_size, data_size, init_size, init_data_size, boot_size; -}; - -static int -il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw, - struct il4965_firmware_pieces *pieces) -{ - struct il_ucode_header *ucode = (void *)ucode_raw->data; - u32 api_ver, hdr_size; - const u8 *src; - - il->ucode_ver = le32_to_cpu(ucode->ver); - api_ver = IL_UCODE_API(il->ucode_ver); - - switch (api_ver) { - default: - case 0: - case 1: - case 2: - hdr_size = 24; - if (ucode_raw->size < hdr_size) { - IL_ERR("File size too small!\n"); - return -EINVAL; - } - pieces->inst_size = le32_to_cpu(ucode->v1.inst_size); - pieces->data_size = le32_to_cpu(ucode->v1.data_size); - pieces->init_size = le32_to_cpu(ucode->v1.init_size); - pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size); - pieces->boot_size = le32_to_cpu(ucode->v1.boot_size); - src = ucode->v1.data; - break; - } - - /* Verify size of file vs. image size info in file's header */ - if (ucode_raw->size != - hdr_size + pieces->inst_size + pieces->data_size + - pieces->init_size + pieces->init_data_size + pieces->boot_size) { - - IL_ERR("uCode file size %d does not match expected size\n", - (int)ucode_raw->size); - return -EINVAL; - } - - pieces->inst = src; - src += pieces->inst_size; - pieces->data = src; - src += pieces->data_size; - pieces->init = src; - src += pieces->init_size; - pieces->init_data = src; - src += pieces->init_data_size; - pieces->boot = src; - src += pieces->boot_size; - - return 0; -} - -/** - * il4965_ucode_callback - callback when firmware was loaded - * - * If loaded successfully, copies the firmware into buffers - * for the card to fetch (via DMA). - */ -static void -il4965_ucode_callback(const struct firmware *ucode_raw, void *context) -{ - struct il_priv *il = context; - struct il_ucode_header *ucode; - int err; - struct il4965_firmware_pieces pieces; - const unsigned int api_max = il->cfg->ucode_api_max; - const unsigned int api_min = il->cfg->ucode_api_min; - u32 api_ver; - - u32 max_probe_length = 200; - u32 standard_phy_calibration_size = - IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; - - memset(&pieces, 0, sizeof(pieces)); - - if (!ucode_raw) { - if (il->fw_idx <= il->cfg->ucode_api_max) - IL_ERR("request for firmware file '%s' failed.\n", - il->firmware_name); - goto try_again; - } - - D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name, - ucode_raw->size); - - /* Make sure that we got at least the API version number */ - if (ucode_raw->size < 4) { - IL_ERR("File size way too small!\n"); - goto try_again; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (struct il_ucode_header *)ucode_raw->data; - - err = il4965_load_firmware(il, ucode_raw, &pieces); - - if (err) - goto try_again; - - api_ver = IL_UCODE_API(il->ucode_ver); - - /* - * api_ver should match the api version forming part of the - * firmware filename ... but we don't check for that and only rely - * on the API version read from firmware header from here on forward - */ - if (api_ver < api_min || api_ver > api_max) { - IL_ERR("Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", api_max, - api_ver); - goto try_again; - } - - if (api_ver != api_max) - IL_ERR("Firmware has old API version. Expected v%u, " - "got v%u. New firmware can be obtained " - "from http://www.intellinuxwireless.org.\n", api_max, - api_ver); - - IL_INFO("loaded firmware version %u.%u.%u.%u\n", - IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver), - IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver)); - - snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version), - "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver), - IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver), - IL_UCODE_SERIAL(il->ucode_ver)); - - /* - * For any of the failures below (before allocating pci memory) - * we will try to load a version with a smaller API -- maybe the - * user just got a corrupted version of the latest API. - */ - - D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); - D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size); - D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size); - D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size); - D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size); - D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size); - - /* Verify that uCode images will fit in card's SRAM */ - if (pieces.inst_size > il->hw_params.max_inst_size) { - IL_ERR("uCode instr len %Zd too large to fit in\n", - pieces.inst_size); - goto try_again; - } - - if (pieces.data_size > il->hw_params.max_data_size) { - IL_ERR("uCode data len %Zd too large to fit in\n", - pieces.data_size); - goto try_again; - } - - if (pieces.init_size > il->hw_params.max_inst_size) { - IL_ERR("uCode init instr len %Zd too large to fit in\n", - pieces.init_size); - goto try_again; - } - - if (pieces.init_data_size > il->hw_params.max_data_size) { - IL_ERR("uCode init data len %Zd too large to fit in\n", - pieces.init_data_size); - goto try_again; - } - - if (pieces.boot_size > il->hw_params.max_bsm_size) { - IL_ERR("uCode boot instr len %Zd too large to fit in\n", - pieces.boot_size); - goto try_again; - } - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - il->ucode_code.len = pieces.inst_size; - il_alloc_fw_desc(il->pci_dev, &il->ucode_code); - - il->ucode_data.len = pieces.data_size; - il_alloc_fw_desc(il->pci_dev, &il->ucode_data); - - il->ucode_data_backup.len = pieces.data_size; - il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup); - - if (!il->ucode_code.v_addr || !il->ucode_data.v_addr || - !il->ucode_data_backup.v_addr) - goto err_pci_alloc; - - /* Initialization instructions and data */ - if (pieces.init_size && pieces.init_data_size) { - il->ucode_init.len = pieces.init_size; - il_alloc_fw_desc(il->pci_dev, &il->ucode_init); - - il->ucode_init_data.len = pieces.init_data_size; - il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data); - - if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr) - goto err_pci_alloc; - } - - /* Bootstrap (instructions only, no data) */ - if (pieces.boot_size) { - il->ucode_boot.len = pieces.boot_size; - il_alloc_fw_desc(il->pci_dev, &il->ucode_boot); - - if (!il->ucode_boot.v_addr) - goto err_pci_alloc; - } - - /* Now that we can no longer fail, copy information */ - - il->sta_key_max_num = STA_KEY_MAX_NUM; - - /* Copy images into buffers for card's bus-master reads ... */ - - /* Runtime instructions (first block of data in file) */ - D_INFO("Copying (but not loading) uCode instr len %Zd\n", - pieces.inst_size); - memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); - - D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n", - il->ucode_code.v_addr, (u32) il->ucode_code.p_addr); - - /* - * Runtime data - * NOTE: Copy into backup buffer will be done in il_up() - */ - D_INFO("Copying (but not loading) uCode data len %Zd\n", - pieces.data_size); - memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); - memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); - - /* Initialization instructions */ - if (pieces.init_size) { - D_INFO("Copying (but not loading) init instr len %Zd\n", - pieces.init_size); - memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); - } - - /* Initialization data */ - if (pieces.init_data_size) { - D_INFO("Copying (but not loading) init data len %Zd\n", - pieces.init_data_size); - memcpy(il->ucode_init_data.v_addr, pieces.init_data, - pieces.init_data_size); - } - - /* Bootstrap instructions */ - D_INFO("Copying (but not loading) boot instr len %Zd\n", - pieces.boot_size); - memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); - - /* - * figure out the offset of chain noise reset and gain commands - * base on the size of standard phy calibration commands table size - */ - il->_4965.phy_calib_chain_noise_reset_cmd = - standard_phy_calibration_size; - il->_4965.phy_calib_chain_noise_gain_cmd = - standard_phy_calibration_size + 1; - - /************************************************** - * This is still part of probe() in a sense... - * - * 9. Setup and register with mac80211 and debugfs - **************************************************/ - err = il4965_mac_setup_register(il, max_probe_length); - if (err) - goto out_unbind; - - err = il_dbgfs_register(il, DRV_NAME); - if (err) - IL_ERR("failed to create debugfs files. Ignoring error: %d\n", - err); - - err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group); - if (err) { - IL_ERR("failed to create sysfs device attributes\n"); - goto out_unbind; - } - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - complete(&il->_4965.firmware_loading_complete); - return; - -try_again: - /* try next, if any */ - if (il4965_request_firmware(il, false)) - goto out_unbind; - release_firmware(ucode_raw); - return; - -err_pci_alloc: - IL_ERR("failed to allocate pci memory\n"); - il4965_dealloc_ucode_pci(il); -out_unbind: - complete(&il->_4965.firmware_loading_complete); - device_release_driver(&il->pci_dev->dev); - release_firmware(ucode_raw); -} - -static const char *const desc_lookup_text[] = { - "OK", - "FAIL", - "BAD_PARAM", - "BAD_CHECKSUM", - "NMI_INTERRUPT_WDG", - "SYSASSERT", - "FATAL_ERROR", - "BAD_COMMAND", - "HW_ERROR_TUNE_LOCK", - "HW_ERROR_TEMPERATURE", - "ILLEGAL_CHAN_FREQ", - "VCC_NOT_STBL", - "FH49_ERROR", - "NMI_INTERRUPT_HOST", - "NMI_INTERRUPT_ACTION_PT", - "NMI_INTERRUPT_UNKNOWN", - "UCODE_VERSION_MISMATCH", - "HW_ERROR_ABS_LOCK", - "HW_ERROR_CAL_LOCK_FAIL", - "NMI_INTERRUPT_INST_ACTION_PT", - "NMI_INTERRUPT_DATA_ACTION_PT", - "NMI_TRM_HW_ER", - "NMI_INTERRUPT_TRM", - "NMI_INTERRUPT_BREAK_POINT", - "DEBUG_0", - "DEBUG_1", - "DEBUG_2", - "DEBUG_3", -}; - -static struct { - char *name; - u8 num; -} advanced_lookup[] = { - { - "NMI_INTERRUPT_WDG", 0x34}, { - "SYSASSERT", 0x35}, { - "UCODE_VERSION_MISMATCH", 0x37}, { - "BAD_COMMAND", 0x38}, { - "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, { - "FATAL_ERROR", 0x3D}, { - "NMI_TRM_HW_ERR", 0x46}, { - "NMI_INTERRUPT_TRM", 0x4C}, { - "NMI_INTERRUPT_BREAK_POINT", 0x54}, { - "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, { - "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, { - "NMI_INTERRUPT_HOST", 0x66}, { - "NMI_INTERRUPT_ACTION_PT", 0x7C}, { - "NMI_INTERRUPT_UNKNOWN", 0x84}, { - "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, { -"ADVANCED_SYSASSERT", 0},}; - -static const char * -il4965_desc_lookup(u32 num) -{ - int i; - int max = ARRAY_SIZE(desc_lookup_text); - - if (num < max) - return desc_lookup_text[num]; - - max = ARRAY_SIZE(advanced_lookup) - 1; - for (i = 0; i < max; i++) { - if (advanced_lookup[i].num == num) - break; - } - return advanced_lookup[i].name; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -void -il4965_dump_nic_error_log(struct il_priv *il) -{ - u32 data2, line; - u32 desc, time, count, base, data1; - u32 blink1, blink2, ilink1, ilink2; - u32 pc, hcmd; - - if (il->ucode_type == UCODE_INIT) - base = le32_to_cpu(il->card_alive_init.error_event_table_ptr); - else - base = le32_to_cpu(il->card_alive.error_event_table_ptr); - - if (!il->ops->is_valid_rtc_data_addr(base)) { - IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n", - base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT"); - return; - } - - count = il_read_targ_mem(il, base); - - if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { - IL_ERR("Start IWL Error Log Dump:\n"); - IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count); - } - - desc = il_read_targ_mem(il, base + 1 * sizeof(u32)); - il->isr_stats.err_code = desc; - pc = il_read_targ_mem(il, base + 2 * sizeof(u32)); - blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32)); - blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32)); - ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32)); - ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32)); - data1 = il_read_targ_mem(il, base + 7 * sizeof(u32)); - data2 = il_read_targ_mem(il, base + 8 * sizeof(u32)); - line = il_read_targ_mem(il, base + 9 * sizeof(u32)); - time = il_read_targ_mem(il, base + 11 * sizeof(u32)); - hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32)); - - IL_ERR("Desc Time " - "data1 data2 line\n"); - IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n", - il4965_desc_lookup(desc), desc, time, data1, data2, line); - IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n"); - IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1, - blink2, ilink1, ilink2, hcmd); -} - -static void -il4965_rf_kill_ct_config(struct il_priv *il) -{ - struct il_ct_kill_config cmd; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&il->lock, flags); - _il_wr(il, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - spin_unlock_irqrestore(&il->lock, flags); - - cmd.critical_temperature_R = - cpu_to_le32(il->hw_params.ct_kill_threshold); - - ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd); - if (ret) - IL_ERR("C_CT_KILL_CONFIG failed\n"); - else - D_INFO("C_CT_KILL_CONFIG " "succeeded, " - "critical temperature is %d\n", - il->hw_params.ct_kill_threshold); -} - -static const s8 default_queue_to_tx_fifo[] = { - IL_TX_FIFO_VO, - IL_TX_FIFO_VI, - IL_TX_FIFO_BE, - IL_TX_FIFO_BK, - IL49_CMD_FIFO_NUM, - IL_TX_FIFO_UNUSED, - IL_TX_FIFO_UNUSED, -}; - -#define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -static int -il4965_alive_notify(struct il_priv *il) -{ - u32 a; - unsigned long flags; - int i, chan; - u32 reg_val; - - spin_lock_irqsave(&il->lock, flags); - - /* Clear 4965's internal Tx Scheduler data base */ - il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR); - a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET; - for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4) - il_write_targ_mem(il, a, 0); - for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4) - il_write_targ_mem(il, a, 0); - for (; - a < - il->scd_base_addr + - IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); - a += 4) - il_write_targ_mem(il, a, 0); - - /* Tel 4965 where to find Tx byte count tables */ - il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10); - - /* Enable DMA channel */ - for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++) - il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan), - FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); - - /* Update FH chicken bits */ - reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG); - il_wr(il, FH49_TX_CHICKEN_BITS_REG, - reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); - - /* Disable chain mode for all queues */ - il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0); - - /* Initialize each Tx queue (including the command queue) */ - for (i = 0; i < il->hw_params.max_txq_num; i++) { - - /* TFD circular buffer read/write idxes */ - il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0); - il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8)); - - /* Max Tx Window size for Scheduler-ACK mode */ - il_write_targ_mem(il, - il->scd_base_addr + - IL49_SCD_CONTEXT_QUEUE_OFFSET(i), - (SCD_WIN_SIZE << - IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) & - IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK); - - /* Frame limit */ - il_write_targ_mem(il, - il->scd_base_addr + - IL49_SCD_CONTEXT_QUEUE_OFFSET(i) + - sizeof(u32), - (SCD_FRAME_LIMIT << - IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK); - - } - il_wr_prph(il, IL49_SCD_INTERRUPT_MASK, - (1 << il->hw_params.max_txq_num) - 1); - - /* Activate all Tx DMA/FIFO channels */ - il4965_txq_set_sched(il, IL_MASK(0, 6)); - - il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0); - - /* make sure all queue are not stopped */ - memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped)); - for (i = 0; i < 4; i++) - atomic_set(&il->queue_stop_count[i], 0); - - /* reset to 0 to enable all the queue first */ - il->txq_ctx_active_msk = 0; - /* Map each Tx/cmd queue to its corresponding fifo */ - BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7); - - for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) { - int ac = default_queue_to_tx_fifo[i]; - - il_txq_ctx_activate(il, i); - - if (ac == IL_TX_FIFO_UNUSED) - continue; - - il4965_tx_queue_set_status(il, &il->txq[i], ac, 0); - } - - spin_unlock_irqrestore(&il->lock, flags); - - return 0; -} - -/** - * il4965_alive_start - called after N_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by il_init_alive_start()). - */ -static void -il4965_alive_start(struct il_priv *il) -{ - int ret = 0; - - D_INFO("Runtime Alive received.\n"); - - if (il->card_alive.is_valid != UCODE_VALID_OK) { - /* We had an error bringing up the hardware, so take it - * all the way back down so we can try again */ - D_INFO("Alive failed.\n"); - goto restart; - } - - /* Initialize uCode has loaded Runtime uCode ... verify inst image. - * This is a paranoid check, because we would not have gotten the - * "runtime" alive if code weren't properly loaded. */ - if (il4965_verify_ucode(il)) { - /* Runtime instruction load was bad; - * take it all the way back down so we can try again */ - D_INFO("Bad runtime uCode load.\n"); - goto restart; - } - - ret = il4965_alive_notify(il); - if (ret) { - IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret); - goto restart; - } - - /* After the ALIVE response, we can send host commands to the uCode */ - set_bit(S_ALIVE, &il->status); - - /* Enable watchdog to monitor the driver tx queues */ - il_setup_watchdog(il); - - if (il_is_rfkill(il)) - return; - - ieee80211_wake_queues(il->hw); - - il->active_rate = RATES_MASK; - - il_power_update_mode(il, true); - D_INFO("Updated power mode\n"); - - if (il_is_associated(il)) { - struct il_rxon_cmd *active_rxon = - (struct il_rxon_cmd *)&il->active; - /* apply any changes in staging */ - il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - /* Initialize our rx_config data */ - il_connection_init_rx_config(il); - - if (il->ops->set_rxon_chain) - il->ops->set_rxon_chain(il); - } - - /* Configure bluetooth coexistence if enabled */ - il_send_bt_config(il); - - il4965_reset_run_time_calib(il); - - set_bit(S_READY, &il->status); - - /* Configure the adapter for unassociated operation */ - il_commit_rxon(il); - - /* At this point, the NIC is initialized and operational */ - il4965_rf_kill_ct_config(il); - - D_INFO("ALIVE processing complete.\n"); - wake_up(&il->wait_command_queue); - - return; - -restart: - queue_work(il->workqueue, &il->restart); -} - -static void il4965_cancel_deferred_work(struct il_priv *il); - -static void -__il4965_down(struct il_priv *il) -{ - unsigned long flags; - int exit_pending; - - D_INFO(DRV_NAME " is going down\n"); - - il_scan_cancel_timeout(il, 200); - - exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status); - - /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&il->watchdog); - - il_clear_ucode_stations(il); - - /* FIXME: race conditions ? */ - spin_lock_irq(&il->sta_lock); - /* - * Remove all key information that is not stored as part - * of station information since mac80211 may not have had - * a chance to remove all the keys. When device is - * reconfigured by mac80211 after an error all keys will - * be reconfigured. - */ - memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys)); - il->_4965.key_mapping_keys = 0; - spin_unlock_irq(&il->sta_lock); - - il_dealloc_bcast_stations(il); - il_clear_driver_stations(il); - - /* Unblock any waiting calls */ - wake_up_all(&il->wait_command_queue); - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(S_EXIT_PENDING, &il->status); - - /* stop and reset the on-board processor */ - _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&il->lock, flags); - il_disable_interrupts(il); - spin_unlock_irqrestore(&il->lock, flags); - il4965_synchronize_irq(il); - - if (il->mac80211_registered) - ieee80211_stop_queues(il->hw); - - /* If we have not previously called il_init() then - * clear all bits but the RF Kill bit and return */ - if (!il_is_init(il)) { - il->status = - test_bit(S_RFKILL, &il->status) << S_RFKILL | - test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | - test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; - goto exit; - } - - /* ...otherwise clear out all the status bits but the RF Kill - * bit and continue taking the NIC down. */ - il->status &= - test_bit(S_RFKILL, &il->status) << S_RFKILL | - test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED | - test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR | - test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING; - - /* - * We disabled and synchronized interrupt, and priv->mutex is taken, so - * here is the only thread which will program device registers, but - * still have lockdep assertions, so we are taking reg_lock. - */ - spin_lock_irq(&il->reg_lock); - /* FIXME: il_grab_nic_access if rfkill is off ? */ - - il4965_txq_ctx_stop(il); - il4965_rxq_stop(il); - /* Power-down device's busmaster DMA clocks */ - _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT); - udelay(5); - /* Make sure (redundant) we've released our request to stay awake */ - _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - /* Stop the device, and put it in low power state */ - _il_apm_stop(il); - - spin_unlock_irq(&il->reg_lock); - - il4965_txq_ctx_unmap(il); -exit: - memset(&il->card_alive, 0, sizeof(struct il_alive_resp)); - - dev_kfree_skb(il->beacon_skb); - il->beacon_skb = NULL; - - /* clear out any free frames */ - il4965_clear_free_frames(il); -} - -static void -il4965_down(struct il_priv *il) -{ - mutex_lock(&il->mutex); - __il4965_down(il); - mutex_unlock(&il->mutex); - - il4965_cancel_deferred_work(il); -} - - -static void -il4965_set_hw_ready(struct il_priv *il) -{ - int ret; - - il_set_bit(il, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); - - /* See if we got it */ - ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, - 100); - if (ret >= 0) - il->hw_ready = true; - - D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not"); -} - -static void -il4965_prepare_card_hw(struct il_priv *il) -{ - int ret; - - il->hw_ready = false; - - il4965_set_hw_ready(il); - if (il->hw_ready) - return; - - /* If HW is not ready, prepare the conditions to check again */ - il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE); - - ret = - _il_poll_bit(il, CSR_HW_IF_CONFIG_REG, - ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, - CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); - - /* HW should be ready by now, check again. */ - if (ret != -ETIMEDOUT) - il4965_set_hw_ready(il); -} - -#define MAX_HW_RESTARTS 5 - -static int -__il4965_up(struct il_priv *il) -{ - int i; - int ret; - - if (test_bit(S_EXIT_PENDING, &il->status)) { - IL_WARN("Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) { - IL_ERR("ucode not available for device bringup\n"); - return -EIO; - } - - ret = il4965_alloc_bcast_station(il); - if (ret) { - il_dealloc_bcast_stations(il); - return ret; - } - - il4965_prepare_card_hw(il); - if (!il->hw_ready) { - IL_ERR("HW not ready\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(S_RFKILL, &il->status); - else { - set_bit(S_RFKILL, &il->status); - wiphy_rfkill_set_hw_state(il->hw->wiphy, true); - - il_enable_rfkill_int(il); - IL_WARN("Radio disabled by HW RF Kill switch\n"); - return 0; - } - - _il_wr(il, CSR_INT, 0xFFFFFFFF); - - /* must be initialised before il_hw_nic_init */ - il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM; - - ret = il4965_hw_nic_init(il); - if (ret) { - IL_ERR("Unable to init nic\n"); - return ret; - } - - /* make sure rfkill handshake bits are cleared */ - _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - _il_wr(il, CSR_INT, 0xFFFFFFFF); - il_enable_interrupts(il); - - /* really make sure rfkill handshake bits are cleared */ - _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Copy original ucode data image from disk into backup cache. - * This will be used to initialize the on-board processor's - * data SRAM for a clean start when the runtime program first loads. */ - memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr, - il->ucode_data.len); - - for (i = 0; i < MAX_HW_RESTARTS; i++) { - - /* load bootstrap state machine, - * load bootstrap program into processor's memory, - * prepare to load the "initialize" uCode */ - ret = il->ops->load_ucode(il); - - if (ret) { - IL_ERR("Unable to set up bootstrap uCode: %d\n", ret); - continue; - } - - /* start card; "initialize" will load runtime ucode */ - il4965_nic_start(il); - - D_INFO(DRV_NAME " is coming up\n"); - - return 0; - } - - set_bit(S_EXIT_PENDING, &il->status); - __il4965_down(il); - clear_bit(S_EXIT_PENDING, &il->status); - - /* tried to restart and config the device for as long as our - * patience could withstand */ - IL_ERR("Unable to initialize device after %d attempts.\n", i); - return -EIO; -} - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void -il4965_bg_init_alive_start(struct work_struct *data) -{ - struct il_priv *il = - container_of(data, struct il_priv, init_alive_start.work); - - mutex_lock(&il->mutex); - if (test_bit(S_EXIT_PENDING, &il->status)) - goto out; - - il->ops->init_alive_start(il); -out: - mutex_unlock(&il->mutex); -} - -static void -il4965_bg_alive_start(struct work_struct *data) -{ - struct il_priv *il = - container_of(data, struct il_priv, alive_start.work); - - mutex_lock(&il->mutex); - if (test_bit(S_EXIT_PENDING, &il->status)) - goto out; - - il4965_alive_start(il); -out: - mutex_unlock(&il->mutex); -} - -static void -il4965_bg_run_time_calib_work(struct work_struct *work) -{ - struct il_priv *il = container_of(work, struct il_priv, - run_time_calib_work); - - mutex_lock(&il->mutex); - - if (test_bit(S_EXIT_PENDING, &il->status) || - test_bit(S_SCANNING, &il->status)) { - mutex_unlock(&il->mutex); - return; - } - - if (il->start_calib) { - il4965_chain_noise_calibration(il, (void *)&il->_4965.stats); - il4965_sensitivity_calibration(il, (void *)&il->_4965.stats); - } - - mutex_unlock(&il->mutex); -} - -static void -il4965_bg_restart(struct work_struct *data) -{ - struct il_priv *il = container_of(data, struct il_priv, restart); - - if (test_bit(S_EXIT_PENDING, &il->status)) - return; - - if (test_and_clear_bit(S_FW_ERROR, &il->status)) { - mutex_lock(&il->mutex); - il->is_open = 0; - - __il4965_down(il); - - mutex_unlock(&il->mutex); - il4965_cancel_deferred_work(il); - ieee80211_restart_hw(il->hw); - } else { - il4965_down(il); - - mutex_lock(&il->mutex); - if (test_bit(S_EXIT_PENDING, &il->status)) { - mutex_unlock(&il->mutex); - return; - } - - __il4965_up(il); - mutex_unlock(&il->mutex); - } -} - -static void -il4965_bg_rx_replenish(struct work_struct *data) -{ - struct il_priv *il = container_of(data, struct il_priv, rx_replenish); - - if (test_bit(S_EXIT_PENDING, &il->status)) - return; - - mutex_lock(&il->mutex); - il4965_rx_replenish(il); - mutex_unlock(&il->mutex); -} - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -#define UCODE_READY_TIMEOUT (4 * HZ) - -/* - * Not a mac80211 entry point function, but it fits in with all the - * other mac80211 functions grouped here. - */ -static int -il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) -{ - int ret; - struct ieee80211_hw *hw = il->hw; - - hw->rate_control_algorithm = "iwl-4965-rs"; - - /* Tell mac80211 our characteristics */ - ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS); - ieee80211_hw_set(hw, SUPPORTS_PS); - ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS); - ieee80211_hw_set(hw, SPECTRUM_MGMT); - ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC); - ieee80211_hw_set(hw, SIGNAL_DBM); - ieee80211_hw_set(hw, AMPDU_AGGREGATION); - if (il->cfg->sku & IL_SKU_N) - hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS | - NL80211_FEATURE_STATIC_SMPS; - - hw->sta_data_size = sizeof(struct il_station_priv); - hw->vif_data_size = sizeof(struct il_vif_priv); - - hw->wiphy->interface_modes = - BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); - - hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; - hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG | - REGULATORY_DISABLE_BEACON_HINTS; - - /* - * For now, disable PS by default because it affects - * RX performance significantly. - */ - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; - /* we create the 802.11 header and a zero-length SSID element */ - hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2; - - /* Default value; 4 EDCA QOS priorities */ - hw->queues = 4; - - hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL; - - if (il->bands[IEEE80211_BAND_2GHZ].n_channels) - il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &il->bands[IEEE80211_BAND_2GHZ]; - if (il->bands[IEEE80211_BAND_5GHZ].n_channels) - il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &il->bands[IEEE80211_BAND_5GHZ]; - - il_leds_init(il); - - ret = ieee80211_register_hw(il->hw); - if (ret) { - IL_ERR("Failed to register hw (error %d)\n", ret); - return ret; - } - il->mac80211_registered = 1; - - return 0; -} - -int -il4965_mac_start(struct ieee80211_hw *hw) -{ - struct il_priv *il = hw->priv; - int ret; - - D_MAC80211("enter\n"); - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&il->mutex); - ret = __il4965_up(il); - mutex_unlock(&il->mutex); - - if (ret) - return ret; - - if (il_is_rfkill(il)) - goto out; - - D_INFO("Start UP work done.\n"); - - /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from - * mac80211 will not be run successfully. */ - ret = wait_event_timeout(il->wait_command_queue, - test_bit(S_READY, &il->status), - UCODE_READY_TIMEOUT); - if (!ret) { - if (!test_bit(S_READY, &il->status)) { - IL_ERR("START_ALIVE timeout after %dms.\n", - jiffies_to_msecs(UCODE_READY_TIMEOUT)); - return -ETIMEDOUT; - } - } - - il4965_led_enable(il); - -out: - il->is_open = 1; - D_MAC80211("leave\n"); - return 0; -} - -void -il4965_mac_stop(struct ieee80211_hw *hw) -{ - struct il_priv *il = hw->priv; - - D_MAC80211("enter\n"); - - if (!il->is_open) - return; - - il->is_open = 0; - - il4965_down(il); - - flush_workqueue(il->workqueue); - - /* User space software may expect getting rfkill changes - * even if interface is down */ - _il_wr(il, CSR_INT, 0xFFFFFFFF); - il_enable_rfkill_int(il); - - D_MAC80211("leave\n"); -} - -void -il4965_mac_tx(struct ieee80211_hw *hw, - struct ieee80211_tx_control *control, - struct sk_buff *skb) -{ - struct il_priv *il = hw->priv; - - D_MACDUMP("enter\n"); - - D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (il4965_tx_skb(il, control->sta, skb)) - dev_kfree_skb_any(skb); - - D_MACDUMP("leave\n"); -} - -void -il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, u32 iv32, u16 * phase1key) -{ - struct il_priv *il = hw->priv; - - D_MAC80211("enter\n"); - - il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key); - - D_MAC80211("leave\n"); -} - -int -il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct il_priv *il = hw->priv; - int ret; - u8 sta_id; - bool is_default_wep_key = false; - - D_MAC80211("enter\n"); - - if (il->cfg->mod_params->sw_crypto) { - D_MAC80211("leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - /* - * To support IBSS RSN, don't program group keys in IBSS, the - * hardware will then not attempt to decrypt the frames. - */ - if (vif->type == NL80211_IFTYPE_ADHOC && - !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { - D_MAC80211("leave - ad-hoc group key\n"); - return -EOPNOTSUPP; - } - - sta_id = il_sta_id_or_broadcast(il, sta); - if (sta_id == IL_INVALID_STATION) - return -EINVAL; - - mutex_lock(&il->mutex); - il_scan_cancel_timeout(il, 100); - - /* - * If we are getting WEP group key and we didn't receive any key mapping - * so far, we are in legacy wep mode (group key only), otherwise we are - * in 1X mode. - * In legacy wep mode, we use another host command to the uCode. - */ - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { - if (cmd == SET_KEY) - is_default_wep_key = !il->_4965.key_mapping_keys; - else - is_default_wep_key = - (key->hw_key_idx == HW_KEY_DEFAULT); - } - - switch (cmd) { - case SET_KEY: - if (is_default_wep_key) - ret = il4965_set_default_wep_key(il, key); - else - ret = il4965_set_dynamic_key(il, key, sta_id); - - D_MAC80211("enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (is_default_wep_key) - ret = il4965_remove_default_wep_key(il, key); - else - ret = il4965_remove_dynamic_key(il, key, sta_id); - - D_MAC80211("disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&il->mutex); - D_MAC80211("leave\n"); - - return ret; -} - -int -il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 * ssn, - u8 buf_size, bool amsdu) -{ - struct il_priv *il = hw->priv; - int ret = -EINVAL; - - D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid); - - if (!(il->cfg->sku & IL_SKU_N)) - return -EACCES; - - mutex_lock(&il->mutex); - - switch (action) { - case IEEE80211_AMPDU_RX_START: - D_HT("start Rx\n"); - ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn); - break; - case IEEE80211_AMPDU_RX_STOP: - D_HT("stop Rx\n"); - ret = il4965_sta_rx_agg_stop(il, sta, tid); - if (test_bit(S_EXIT_PENDING, &il->status)) - ret = 0; - break; - case IEEE80211_AMPDU_TX_START: - D_HT("start Tx\n"); - ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); - break; - case IEEE80211_AMPDU_TX_STOP_CONT: - case IEEE80211_AMPDU_TX_STOP_FLUSH: - case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: - D_HT("stop Tx\n"); - ret = il4965_tx_agg_stop(il, vif, sta, tid); - if (test_bit(S_EXIT_PENDING, &il->status)) - ret = 0; - break; - case IEEE80211_AMPDU_TX_OPERATIONAL: - ret = 0; - break; - } - mutex_unlock(&il->mutex); - - return ret; -} - -int -il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct il_priv *il = hw->priv; - struct il_station_priv *sta_priv = (void *)sta->drv_priv; - bool is_ap = vif->type == NL80211_IFTYPE_STATION; - int ret; - u8 sta_id; - - D_INFO("received request to add station %pM\n", sta->addr); - mutex_lock(&il->mutex); - D_INFO("proceeding to add station %pM\n", sta->addr); - sta_priv->common.sta_id = IL_INVALID_STATION; - - atomic_set(&sta_priv->pending_frames, 0); - - ret = - il_add_station_common(il, sta->addr, is_ap, sta, &sta_id); - if (ret) { - IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret); - /* Should we return success if return code is EEXIST ? */ - mutex_unlock(&il->mutex); - return ret; - } - - sta_priv->common.sta_id = sta_id; - - /* Initialize rate scaling */ - D_INFO("Initializing rate scaling for station %pM\n", sta->addr); - il4965_rs_rate_init(il, sta, sta_id); - mutex_unlock(&il->mutex); - - return 0; -} - -void -il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_channel_switch *ch_switch) -{ - struct il_priv *il = hw->priv; - const struct il_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = ch_switch->chandef.chan; - struct il_ht_config *ht_conf = &il->current_ht_config; - u16 ch; - - D_MAC80211("enter\n"); - - mutex_lock(&il->mutex); - - if (il_is_rfkill(il)) - goto out; - - if (test_bit(S_EXIT_PENDING, &il->status) || - test_bit(S_SCANNING, &il->status) || - test_bit(S_CHANNEL_SWITCH_PENDING, &il->status)) - goto out; - - if (!il_is_associated(il)) - goto out; - - if (!il->ops->set_channel_switch) - goto out; - - ch = channel->hw_value; - if (le16_to_cpu(il->active.channel) == ch) - goto out; - - ch_info = il_get_channel_info(il, channel->band, ch); - if (!il_is_channel_valid(ch_info)) { - D_MAC80211("invalid channel\n"); - goto out; - } - - spin_lock_irq(&il->lock); - - il->current_ht_config.smps = conf->smps_mode; - - /* Configure HT40 channels */ - switch (cfg80211_get_chandef_type(&ch_switch->chandef)) { - case NL80211_CHAN_NO_HT: - case NL80211_CHAN_HT20: - il->ht.is_40mhz = false; - il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; - break; - case NL80211_CHAN_HT40MINUS: - il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; - il->ht.is_40mhz = true; - break; - case NL80211_CHAN_HT40PLUS: - il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - il->ht.is_40mhz = true; - break; - } - - if ((le16_to_cpu(il->staging.channel) != ch)) - il->staging.flags = 0; - - il_set_rxon_channel(il, channel); - il_set_rxon_ht(il, ht_conf); - il_set_flags_for_band(il, channel->band, il->vif); - - spin_unlock_irq(&il->lock); - - il_set_rate(il); - /* - * at this point, staging_rxon has the - * configuration for channel switch - */ - set_bit(S_CHANNEL_SWITCH_PENDING, &il->status); - il->switch_channel = cpu_to_le16(ch); - if (il->ops->set_channel_switch(il, ch_switch)) { - clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status); - il->switch_channel = 0; - ieee80211_chswitch_done(il->vif, false); - } - -out: - mutex_unlock(&il->mutex); - D_MAC80211("leave\n"); -} - -void -il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, - unsigned int *total_flags, u64 multicast) -{ - struct il_priv *il = hw->priv; - __le32 filter_or = 0, filter_nand = 0; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags, - *total_flags); - - CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK); - /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&il->mutex); - - il->staging.filter_flags &= ~filter_nand; - il->staging.filter_flags |= filter_or; - - /* - * Not committing directly because hardware can perform a scan, - * but we'll eventually commit the filter flags change anyway. - */ - - mutex_unlock(&il->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in il_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= - FIF_OTHER_BSS | FIF_ALLMULTI | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void -il4965_bg_txpower_work(struct work_struct *work) -{ - struct il_priv *il = container_of(work, struct il_priv, - txpower_work); - - mutex_lock(&il->mutex); - - /* If a scan happened to start before we got here - * then just return; the stats notification will - * kick off another scheduled work to compensate for - * any temperature delta we missed here. */ - if (test_bit(S_EXIT_PENDING, &il->status) || - test_bit(S_SCANNING, &il->status)) - goto out; - - /* Regardless of if we are associated, we must reconfigure the - * TX power since frames can be sent on non-radar channels while - * not associated */ - il->ops->send_tx_power(il); - - /* Update last_temperature to keep is_calib_needed from running - * when it isn't needed... */ - il->last_temperature = il->temperature; -out: - mutex_unlock(&il->mutex); -} - -static void -il4965_setup_deferred_work(struct il_priv *il) -{ - il->workqueue = create_singlethread_workqueue(DRV_NAME); - - init_waitqueue_head(&il->wait_command_queue); - - INIT_WORK(&il->restart, il4965_bg_restart); - INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish); - INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work); - INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start); - INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start); - - il_setup_scan_deferred_work(il); - - INIT_WORK(&il->txpower_work, il4965_bg_txpower_work); - - setup_timer(&il->stats_periodic, il4965_bg_stats_periodic, - (unsigned long)il); - - setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il); - - tasklet_init(&il->irq_tasklet, - (void (*)(unsigned long))il4965_irq_tasklet, - (unsigned long)il); -} - -static void -il4965_cancel_deferred_work(struct il_priv *il) -{ - cancel_work_sync(&il->txpower_work); - cancel_delayed_work_sync(&il->init_alive_start); - cancel_delayed_work(&il->alive_start); - cancel_work_sync(&il->run_time_calib_work); - - il_cancel_scan_deferred_work(il); - - del_timer_sync(&il->stats_periodic); -} - -static void -il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = il_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on idxes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (il_rates[i].plcp == - RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -/* - * Acquire il->lock before calling this function ! - */ -void -il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx) -{ - il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8)); - il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx); -} - -void -il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq, - int tx_fifo_id, int scd_retry) -{ - int txq_id = txq->q.id; - - /* Find out whether to activate Tx queue */ - int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0; - - /* Set up and activate */ - il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id), - (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) | - (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) | - (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) | - IL49_SCD_QUEUE_STTS_REG_MSK); - - txq->sched_retry = scd_retry; - - D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate", - scd_retry ? "BA" : "AC", txq_id, tx_fifo_id); -} - -static const struct ieee80211_ops il4965_mac_ops = { - .tx = il4965_mac_tx, - .start = il4965_mac_start, - .stop = il4965_mac_stop, - .add_interface = il_mac_add_interface, - .remove_interface = il_mac_remove_interface, - .change_interface = il_mac_change_interface, - .config = il_mac_config, - .configure_filter = il4965_configure_filter, - .set_key = il4965_mac_set_key, - .update_tkip_key = il4965_mac_update_tkip_key, - .conf_tx = il_mac_conf_tx, - .reset_tsf = il_mac_reset_tsf, - .bss_info_changed = il_mac_bss_info_changed, - .ampdu_action = il4965_mac_ampdu_action, - .hw_scan = il_mac_hw_scan, - .sta_add = il4965_mac_sta_add, - .sta_remove = il_mac_sta_remove, - .channel_switch = il4965_mac_channel_switch, - .tx_last_beacon = il_mac_tx_last_beacon, - .flush = il_mac_flush, -}; - -static int -il4965_init_drv(struct il_priv *il) -{ - int ret; - - spin_lock_init(&il->sta_lock); - spin_lock_init(&il->hcmd_lock); - - INIT_LIST_HEAD(&il->free_frames); - - mutex_init(&il->mutex); - - il->ieee_channels = NULL; - il->ieee_rates = NULL; - il->band = IEEE80211_BAND_2GHZ; - - il->iw_mode = NL80211_IFTYPE_STATION; - il->current_ht_config.smps = IEEE80211_SMPS_STATIC; - il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF; - - /* initialize force reset */ - il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD; - - /* Choose which receivers/antennas to use */ - if (il->ops->set_rxon_chain) - il->ops->set_rxon_chain(il); - - il_init_scan_params(il); - - ret = il_init_channel_map(il); - if (ret) { - IL_ERR("initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = il_init_geos(il); - if (ret) { - IL_ERR("initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - il4965_init_hw_rates(il, il->ieee_rates); - - return 0; - -err_free_channel_map: - il_free_channel_map(il); -err: - return ret; -} - -static void -il4965_uninit_drv(struct il_priv *il) -{ - il_free_geos(il); - il_free_channel_map(il); - kfree(il->scan_cmd); -} - -static void -il4965_hw_detect(struct il_priv *il) -{ - il->hw_rev = _il_rd(il, CSR_HW_REV); - il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG); - il->rev_id = il->pci_dev->revision; - D_INFO("HW Revision ID = 0x%X\n", il->rev_id); -} - -static struct il_sensitivity_ranges il4965_sensitivity = { - .min_nrg_cck = 97, - .max_nrg_cck = 0, /* not used, set to 0 */ - - .auto_corr_min_ofdm = 85, - .auto_corr_min_ofdm_mrc = 170, - .auto_corr_min_ofdm_x1 = 105, - .auto_corr_min_ofdm_mrc_x1 = 220, - - .auto_corr_max_ofdm = 120, - .auto_corr_max_ofdm_mrc = 210, - .auto_corr_max_ofdm_x1 = 140, - .auto_corr_max_ofdm_mrc_x1 = 270, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 200, - .auto_corr_min_cck_mrc = 200, - .auto_corr_max_cck_mrc = 400, - - .nrg_th_cck = 100, - .nrg_th_ofdm = 100, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -static void -il4965_set_hw_params(struct il_priv *il) -{ - il->hw_params.bcast_id = IL4965_BROADCAST_ID; - il->hw_params.max_rxq_size = RX_QUEUE_SIZE; - il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; - if (il->cfg->mod_params->amsdu_size_8K) - il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K); - else - il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K); - - il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL; - - if (il->cfg->mod_params->disable_11n) - il->cfg->sku &= ~IL_SKU_N; - - if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES && - il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES) - il->cfg->num_of_queues = - il->cfg->mod_params->num_of_queues; - - il->hw_params.max_txq_num = il->cfg->num_of_queues; - il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM; - il->hw_params.scd_bc_tbls_size = - il->cfg->num_of_queues * - sizeof(struct il4965_scd_bc_tbl); - - il->hw_params.tfd_size = sizeof(struct il_tfd); - il->hw_params.max_stations = IL4965_STATION_COUNT; - il->hw_params.max_data_size = IL49_RTC_DATA_SIZE; - il->hw_params.max_inst_size = IL49_RTC_INST_SIZE; - il->hw_params.max_bsm_size = BSM_SRAM_SIZE; - il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ); - - il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR; - - il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant); - il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant); - il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant; - il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant; - - il->hw_params.ct_kill_threshold = - CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY); - - il->hw_params.sens = &il4965_sensitivity; - il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS; -} - -static int -il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int err = 0; - struct il_priv *il; - struct ieee80211_hw *hw; - struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data); - unsigned long flags; - u16 pci_cmd; - - /************************ - * 1. Allocating HW data - ************************/ - - hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops); - if (!hw) { - err = -ENOMEM; - goto out; - } - il = hw->priv; - il->hw = hw; - SET_IEEE80211_DEV(hw, &pdev->dev); - - D_INFO("*** LOAD DRIVER ***\n"); - il->cfg = cfg; - il->ops = &il4965_ops; -#ifdef CONFIG_IWLEGACY_DEBUGFS - il->debugfs_ops = &il4965_debugfs_ops; -#endif - il->pci_dev = pdev; - il->inta_mask = CSR_INI_SET_MASK; - - /************************** - * 2. Initializing PCI bus - **************************/ - pci_disable_link_state(pdev, - PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_ieee80211_free_hw; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); - if (err) { - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (!err) - err = - pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); - /* both attempts failed: */ - if (err) { - IL_WARN("No suitable DMA available.\n"); - goto out_pci_disable_device; - } - } - - err = pci_request_regions(pdev, DRV_NAME); - if (err) - goto out_pci_disable_device; - - pci_set_drvdata(pdev, il); - - /*********************** - * 3. Read REV register - ***********************/ - il->hw_base = pci_ioremap_bar(pdev, 0); - if (!il->hw_base) { - err = -ENODEV; - goto out_pci_release_regions; - } - - D_INFO("pci_resource_len = 0x%08llx\n", - (unsigned long long)pci_resource_len(pdev, 0)); - D_INFO("pci_resource_base = %p\n", il->hw_base); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&il->reg_lock); - spin_lock_init(&il->lock); - - /* - * stop and reset the on-board processor just in case it is in a - * strange state ... like being left stranded by a primary kernel - * and this is now the kdump kernel trying to start up - */ - _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); - - il4965_hw_detect(il); - IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - - il4965_prepare_card_hw(il); - if (!il->hw_ready) { - IL_WARN("Failed, HW not ready\n"); - err = -EIO; - goto out_iounmap; - } - - /***************** - * 4. Read EEPROM - *****************/ - /* Read the EEPROM */ - err = il_eeprom_init(il); - if (err) { - IL_ERR("Unable to init EEPROM\n"); - goto out_iounmap; - } - err = il4965_eeprom_check_version(il); - if (err) - goto out_free_eeprom; - - /* extract MAC Address */ - il4965_eeprom_get_mac(il, il->addresses[0].addr); - D_INFO("MAC address: %pM\n", il->addresses[0].addr); - il->hw->wiphy->addresses = il->addresses; - il->hw->wiphy->n_addresses = 1; - - /************************ - * 5. Setup HW constants - ************************/ - il4965_set_hw_params(il); - - /******************* - * 6. Setup il - *******************/ - - err = il4965_init_drv(il); - if (err) - goto out_free_eeprom; - /* At this point both hw and il are initialized. */ - - /******************** - * 7. Setup services - ********************/ - spin_lock_irqsave(&il->lock, flags); - il_disable_interrupts(il); - spin_unlock_irqrestore(&il->lock, flags); - - pci_enable_msi(il->pci_dev); - - err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il); - if (err) { - IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq); - goto out_disable_msi; - } - - il4965_setup_deferred_work(il); - il4965_setup_handlers(il); - - /********************************************* - * 8. Enable interrupts and read RFKILL state - *********************************************/ - - /* enable rfkill interrupt: hw bug w/a */ - pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd); - if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { - pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; - pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd); - } - - il_enable_rfkill_int(il); - - /* If platform's RF_KILL switch is NOT set to KILL */ - if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) - clear_bit(S_RFKILL, &il->status); - else - set_bit(S_RFKILL, &il->status); - - wiphy_rfkill_set_hw_state(il->hw->wiphy, - test_bit(S_RFKILL, &il->status)); - - il_power_initialize(il); - - init_completion(&il->_4965.firmware_loading_complete); - - err = il4965_request_firmware(il, true); - if (err) - goto out_destroy_workqueue; - - return 0; - -out_destroy_workqueue: - destroy_workqueue(il->workqueue); - il->workqueue = NULL; - free_irq(il->pci_dev->irq, il); -out_disable_msi: - pci_disable_msi(il->pci_dev); - il4965_uninit_drv(il); -out_free_eeprom: - il_eeprom_free(il); -out_iounmap: - iounmap(il->hw_base); -out_pci_release_regions: - pci_release_regions(pdev); -out_pci_disable_device: - pci_disable_device(pdev); -out_ieee80211_free_hw: - ieee80211_free_hw(il->hw); -out: - return err; -} - -static void -il4965_pci_remove(struct pci_dev *pdev) -{ - struct il_priv *il = pci_get_drvdata(pdev); - unsigned long flags; - - if (!il) - return; - - wait_for_completion(&il->_4965.firmware_loading_complete); - - D_INFO("*** UNLOAD DRIVER ***\n"); - - il_dbgfs_unregister(il); - sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group); - - /* ieee80211_unregister_hw call wil cause il_mac_stop to - * to be called and il4965_down since we are removing the device - * we need to set S_EXIT_PENDING bit. - */ - set_bit(S_EXIT_PENDING, &il->status); - - il_leds_exit(il); - - if (il->mac80211_registered) { - ieee80211_unregister_hw(il->hw); - il->mac80211_registered = 0; - } else { - il4965_down(il); - } - - /* - * Make sure device is reset to low power before unloading driver. - * This may be redundant with il4965_down(), but there are paths to - * run il4965_down() without calling apm_ops.stop(), and there are - * paths to avoid running il4965_down() at all before leaving driver. - * This (inexpensive) call *makes sure* device is reset. - */ - il_apm_stop(il); - - /* make sure we flush any pending irq or - * tasklet for the driver - */ - spin_lock_irqsave(&il->lock, flags); - il_disable_interrupts(il); - spin_unlock_irqrestore(&il->lock, flags); - - il4965_synchronize_irq(il); - - il4965_dealloc_ucode_pci(il); - - if (il->rxq.bd) - il4965_rx_queue_free(il, &il->rxq); - il4965_hw_txq_ctx_free(il); - - il_eeprom_free(il); - - /*netif_stop_queue(dev); */ - flush_workqueue(il->workqueue); - - /* ieee80211_unregister_hw calls il_mac_stop, which flushes - * il->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(il->workqueue); - il->workqueue = NULL; - - free_irq(il->pci_dev->irq, il); - pci_disable_msi(il->pci_dev); - iounmap(il->hw_base); - pci_release_regions(pdev); - pci_disable_device(pdev); - - il4965_uninit_drv(il); - - dev_kfree_skb(il->beacon_skb); - - ieee80211_free_hw(il->hw); -} - -/* - * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask - * must be called under il->lock and mac access - */ -void -il4965_txq_set_sched(struct il_priv *il, u32 mask) -{ - il_wr_prph(il, IL49_SCD_TXFACT, mask); -} - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -/* Hardware specific file defines the PCI IDs table for that hardware module */ -static const struct pci_device_id il4965_hw_card_ids[] = { - {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)}, - {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)}, - {0} -}; -MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids); - -static struct pci_driver il4965_driver = { - .name = DRV_NAME, - .id_table = il4965_hw_card_ids, - .probe = il4965_pci_probe, - .remove = il4965_pci_remove, - .driver.pm = IL_LEGACY_PM_OPS, -}; - -static int __init -il4965_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - ret = il4965_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - return ret; - } - - ret = pci_register_driver(&il4965_driver); - if (ret) { - pr_err("Unable to initialize PCI module\n"); - goto error_register; - } - - return ret; - -error_register: - il4965_rate_control_unregister(); - return ret; -} - -static void __exit -il4965_exit(void) -{ - pci_unregister_driver(&il4965_driver); - il4965_rate_control_unregister(); -} - -module_exit(il4965_exit); -module_init(il4965_init); - -#ifdef CONFIG_IWLEGACY_DEBUG -module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif - -module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); -module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO); -MODULE_PARM_DESC(queues_num, "number of hw queues."); -module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO); -MODULE_PARM_DESC(11n_disable, "disable 11n functionality"); -module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, - S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])"); -module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); -- cgit v1.2.3-54-g00ecf