From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/net/wireless/iwlegacy/common.h | 3084 ++++++++++++++++++++++++++++++++ 1 file changed, 3084 insertions(+) create mode 100644 drivers/net/wireless/iwlegacy/common.h (limited to 'drivers/net/wireless/iwlegacy/common.h') diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h new file mode 100644 index 000000000..5b972798b --- /dev/null +++ b/drivers/net/wireless/iwlegacy/common.h @@ -0,0 +1,3084 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#ifndef __il_core_h__ +#define __il_core_h__ + +#include +#include /* for struct pci_device_id */ +#include +#include +#include +#include +#include +#include + +#include "commands.h" +#include "csr.h" +#include "prph.h" + +struct il_host_cmd; +struct il_cmd; +struct il_tx_queue; + +#define IL_ERR(f, a...) dev_err(&il->pci_dev->dev, f, ## a) +#define IL_WARN(f, a...) dev_warn(&il->pci_dev->dev, f, ## a) +#define IL_INFO(f, a...) dev_info(&il->pci_dev->dev, f, ## a) + +#define RX_QUEUE_SIZE 256 +#define RX_QUEUE_MASK 255 +#define RX_QUEUE_SIZE_LOG 8 + +/* + * RX related structures and functions + */ +#define RX_FREE_BUFFERS 64 +#define RX_LOW_WATERMARK 8 + +#define U32_PAD(n) ((4-(n))&0x3) + +/* CT-KILL constants */ +#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ + +/* Default noise level to report when noise measurement is not available. + * This may be because we're: + * 1) Not associated (4965, no beacon stats being sent to driver) + * 2) Scanning (noise measurement does not apply to associated channel) + * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) + * Use default noise value of -127 ... this is below the range of measurable + * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. + * Also, -127 works better than 0 when averaging frames with/without + * noise info (e.g. averaging might be done in app); measured dBm values are + * always negative ... using a negative value as the default keeps all + * averages within an s8's (used in some apps) range of negative values. */ +#define IL_NOISE_MEAS_NOT_AVAILABLE (-127) + +/* + * RTS threshold here is total size [2347] minus 4 FCS bytes + * Per spec: + * a value of 0 means RTS on all data/management packets + * a value > max MSDU size means no RTS + * else RTS for data/management frames where MPDU is larger + * than RTS value. + */ +#define DEFAULT_RTS_THRESHOLD 2347U +#define MIN_RTS_THRESHOLD 0U +#define MAX_RTS_THRESHOLD 2347U +#define MAX_MSDU_SIZE 2304U +#define MAX_MPDU_SIZE 2346U +#define DEFAULT_BEACON_INTERVAL 100U +#define DEFAULT_SHORT_RETRY_LIMIT 7U +#define DEFAULT_LONG_RETRY_LIMIT 4U + +struct il_rx_buf { + dma_addr_t page_dma; + struct page *page; + struct list_head list; +}; + +#define rxb_addr(r) page_address(r->page) + +/* defined below */ +struct il_device_cmd; + +struct il_cmd_meta { + /* only for SYNC commands, iff the reply skb is wanted */ + struct il_host_cmd *source; + /* + * only for ASYNC commands + * (which is somewhat stupid -- look at common.c for instance + * which duplicates a bunch of code because the callback isn't + * invoked for SYNC commands, if it were and its result passed + * through it would be simpler...) + */ + void (*callback) (struct il_priv *il, struct il_device_cmd *cmd, + struct il_rx_pkt *pkt); + + /* The CMD_SIZE_HUGE flag bit indicates that the command + * structure is stored at the end of the shared queue memory. */ + u32 flags; + + DEFINE_DMA_UNMAP_ADDR(mapping); + DEFINE_DMA_UNMAP_LEN(len); +}; + +/* + * Generic queue structure + * + * Contains common data for Rx and Tx queues + */ +struct il_queue { + int n_bd; /* number of BDs in this queue */ + int write_ptr; /* 1-st empty entry (idx) host_w */ + int read_ptr; /* last used entry (idx) host_r */ + /* use for monitoring and recovering the stuck queue */ + dma_addr_t dma_addr; /* physical addr for BD's */ + int n_win; /* safe queue win */ + u32 id; + int low_mark; /* low watermark, resume queue if free + * space more than this */ + int high_mark; /* high watermark, stop queue if free + * space less than this */ +}; + +/** + * struct il_tx_queue - Tx Queue for DMA + * @q: generic Rx/Tx queue descriptor + * @bd: base of circular buffer of TFDs + * @cmd: array of command/TX buffer pointers + * @meta: array of meta data for each command/tx buffer + * @dma_addr_cmd: physical address of cmd/tx buffer array + * @skbs: array of per-TFD socket buffer pointers + * @time_stamp: time (in jiffies) of last read_ptr change + * @need_update: indicates need to update read/write idx + * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled + * + * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame + * descriptors) and required locking structures. + */ +#define TFD_TX_CMD_SLOTS 256 +#define TFD_CMD_SLOTS 32 + +struct il_tx_queue { + struct il_queue q; + void *tfds; + struct il_device_cmd **cmd; + struct il_cmd_meta *meta; + struct sk_buff **skbs; + unsigned long time_stamp; + u8 need_update; + u8 sched_retry; + u8 active; + u8 swq_id; +}; + +/* + * EEPROM access time values: + * + * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. + * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). + * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. + * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. + */ +#define IL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ + +#define IL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ +#define IL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ + +/* + * Regulatory channel usage flags in EEPROM struct il4965_eeprom_channel.flags. + * + * IBSS and/or AP operation is allowed *only* on those channels with + * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because + * RADAR detection is not supported by the 4965 driver, but is a + * requirement for establishing a new network for legal operation on channels + * requiring RADAR detection or restricting ACTIVE scanning. + * + * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. + * It only indicates that 20 MHz channel use is supported; HT40 channel + * usage is indicated by a separate set of regulatory flags for each + * HT40 channel pair. + * + * NOTE: Using a channel inappropriately will result in a uCode error! + */ +#define IL_NUM_TX_CALIB_GROUPS 5 +enum { + EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */ + EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */ + /* Bit 2 Reserved */ + EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ + EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ + EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ + /* Bit 6 Reserved (was Narrow Channel) */ + EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ +}; + +/* SKU Capabilities */ +/* 3945 only */ +#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0) +#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1) + +/* *regulatory* channel data format in eeprom, one for each channel. + * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ +struct il_eeprom_channel { + u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ + s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ +} __packed; + +/* 3945 Specific */ +#define EEPROM_3945_EEPROM_VERSION (0x2f) + +/* 4965 has two radio transmitters (and 3 radio receivers) */ +#define EEPROM_TX_POWER_TX_CHAINS (2) + +/* 4965 has room for up to 8 sets of txpower calibration data */ +#define EEPROM_TX_POWER_BANDS (8) + +/* 4965 factory calibration measures txpower gain settings for + * each of 3 target output levels */ +#define EEPROM_TX_POWER_MEASUREMENTS (3) + +/* 4965 Specific */ +/* 4965 driver does not work with txpower calibration version < 5 */ +#define EEPROM_4965_TX_POWER_VERSION (5) +#define EEPROM_4965_EEPROM_VERSION (0x2f) +#define EEPROM_4965_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */ +#define EEPROM_4965_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */ +#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */ +#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */ + +/* 2.4 GHz */ +extern const u8 il_eeprom_band_1[14]; + +/* + * factory calibration data for one txpower level, on one channel, + * measured on one of the 2 tx chains (radio transmitter and associated + * antenna). EEPROM contains: + * + * 1) Temperature (degrees Celsius) of device when measurement was made. + * + * 2) Gain table idx used to achieve the target measurement power. + * This refers to the "well-known" gain tables (see 4965.h). + * + * 3) Actual measured output power, in half-dBm ("34" = 17 dBm). + * + * 4) RF power amplifier detector level measurement (not used). + */ +struct il_eeprom_calib_measure { + u8 temperature; /* Device temperature (Celsius) */ + u8 gain_idx; /* Index into gain table */ + u8 actual_pow; /* Measured RF output power, half-dBm */ + s8 pa_det; /* Power amp detector level (not used) */ +} __packed; + +/* + * measurement set for one channel. EEPROM contains: + * + * 1) Channel number measured + * + * 2) Measurements for each of 3 power levels for each of 2 radio transmitters + * (a.k.a. "tx chains") (6 measurements altogether) + */ +struct il_eeprom_calib_ch_info { + u8 ch_num; + struct il_eeprom_calib_measure + measurements[EEPROM_TX_POWER_TX_CHAINS] + [EEPROM_TX_POWER_MEASUREMENTS]; +} __packed; + +/* + * txpower subband info. + * + * For each frequency subband, EEPROM contains the following: + * + * 1) First and last channels within range of the subband. "0" values + * indicate that this sample set is not being used. + * + * 2) Sample measurement sets for 2 channels close to the range endpoints. + */ +struct il_eeprom_calib_subband_info { + u8 ch_from; /* channel number of lowest channel in subband */ + u8 ch_to; /* channel number of highest channel in subband */ + struct il_eeprom_calib_ch_info ch1; + struct il_eeprom_calib_ch_info ch2; +} __packed; + +/* + * txpower calibration info. EEPROM contains: + * + * 1) Factory-measured saturation power levels (maximum levels at which + * tx power amplifier can output a signal without too much distortion). + * There is one level for 2.4 GHz band and one for 5 GHz band. These + * values apply to all channels within each of the bands. + * + * 2) Factory-measured power supply voltage level. This is assumed to be + * constant (i.e. same value applies to all channels/bands) while the + * factory measurements are being made. + * + * 3) Up to 8 sets of factory-measured txpower calibration values. + * These are for different frequency ranges, since txpower gain + * characteristics of the analog radio circuitry vary with frequency. + * + * Not all sets need to be filled with data; + * struct il_eeprom_calib_subband_info contains range of channels + * (0 if unused) for each set of data. + */ +struct il_eeprom_calib_info { + u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */ + u8 saturation_power52; /* half-dBm */ + __le16 voltage; /* signed */ + struct il_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS]; +} __packed; + +/* General */ +#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ +#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ +#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ +#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ +#define EEPROM_VERSION (2*0x44) /* 2 bytes */ +#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ +#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ +#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */ +#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ +#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ + +/* The following masks are to be applied on EEPROM_RADIO_CONFIG */ +#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ +#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ +#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ +#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ +#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ +#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ + +#define EEPROM_3945_RF_CFG_TYPE_MAX 0x0 +#define EEPROM_4965_RF_CFG_TYPE_MAX 0x1 + +/* + * Per-channel regulatory data. + * + * Each channel that *might* be supported by iwl has a fixed location + * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory + * txpower (MSB). + * + * Entries immediately below are for 20 MHz channel width. HT40 (40 MHz) + * channels (only for 4965, not supported by 3945) appear later in the EEPROM. + * + * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 + */ +#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */ +#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */ + +/* + * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, + * 5.0 GHz channels 7, 8, 11, 12, 16 + * (4915-5080MHz) (none of these is ever supported) + */ +#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */ + +/* + * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 + * (5170-5320MHz) + */ +#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */ + +/* + * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 + * (5500-5700MHz) + */ +#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */ + +/* + * 5.7 GHz channels 145, 149, 153, 157, 161, 165 + * (5725-5825MHz) + */ +#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */ +#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */ + +/* + * 2.4 GHz HT40 channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11) + * + * The channel listed is the center of the lower 20 MHz half of the channel. + * The overall center frequency is actually 2 channels (10 MHz) above that, + * and the upper half of each HT40 channel is centered 4 channels (20 MHz) away + * from the lower half; e.g. the upper half of HT40 channel 1 is channel 5, + * and the overall HT40 channel width centers on channel 3. + * + * NOTE: The RXON command uses 20 MHz channel numbers to specify the + * control channel to which to tune. RXON also specifies whether the + * control channel is the upper or lower half of a HT40 channel. + * + * NOTE: 4965 does not support HT40 channels on 2.4 GHz. + */ +#define EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS (2*0xA0) /* 14 bytes */ + +/* + * 5.2 GHz HT40 channels 36 (40), 44 (48), 52 (56), 60 (64), + * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161) + */ +#define EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS (2*0xA8) /* 22 bytes */ + +#define EEPROM_REGULATORY_BAND_NO_HT40 (0) + +int il_eeprom_init(struct il_priv *il); +void il_eeprom_free(struct il_priv *il); +const u8 *il_eeprom_query_addr(const struct il_priv *il, size_t offset); +u16 il_eeprom_query16(const struct il_priv *il, size_t offset); +int il_init_channel_map(struct il_priv *il); +void il_free_channel_map(struct il_priv *il); +const struct il_channel_info *il_get_channel_info(const struct il_priv *il, + enum ieee80211_band band, + u16 channel); + +#define IL_NUM_SCAN_RATES (2) + +struct il4965_channel_tgd_info { + u8 type; + s8 max_power; +}; + +struct il4965_channel_tgh_info { + s64 last_radar_time; +}; + +#define IL4965_MAX_RATE (33) + +struct il3945_clip_group { + /* maximum power level to prevent clipping for each rate, derived by + * us from this band's saturation power in EEPROM */ + const s8 clip_powers[IL_MAX_RATES]; +}; + +/* current Tx power values to use, one for each rate for each channel. + * requested power is limited by: + * -- regulatory EEPROM limits for this channel + * -- hardware capabilities (clip-powers) + * -- spectrum management + * -- user preference (e.g. iwconfig) + * when requested power is set, base power idx must also be set. */ +struct il3945_channel_power_info { + struct il3945_tx_power tpc; /* actual radio and DSP gain settings */ + s8 power_table_idx; /* actual (compenst'd) idx into gain table */ + s8 base_power_idx; /* gain idx for power at factory temp. */ + s8 requested_power; /* power (dBm) requested for this chnl/rate */ +}; + +/* current scan Tx power values to use, one for each scan rate for each + * channel. */ +struct il3945_scan_power_info { + struct il3945_tx_power tpc; /* actual radio and DSP gain settings */ + s8 power_table_idx; /* actual (compenst'd) idx into gain table */ + s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ +}; + +/* + * One for each channel, holds all channel setup data + * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant + * with one another! + */ +struct il_channel_info { + struct il4965_channel_tgd_info tgd; + struct il4965_channel_tgh_info tgh; + struct il_eeprom_channel eeprom; /* EEPROM regulatory limit */ + struct il_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for + * HT40 channel */ + + u8 channel; /* channel number */ + u8 flags; /* flags copied from EEPROM */ + s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ + s8 min_power; /* always 0 */ + s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ + + u8 group_idx; /* 0-4, maps channel to group1/2/3/4/5 */ + u8 band_idx; /* 0-4, maps channel to band1/2/3/4/5 */ + enum ieee80211_band band; + + /* HT40 channel info */ + s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ + u8 ht40_flags; /* flags copied from EEPROM */ + u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ + + /* Radio/DSP gain settings for each "normal" data Tx rate. + * These include, in addition to RF and DSP gain, a few fields for + * remembering/modifying gain settings (idxes). */ + struct il3945_channel_power_info power_info[IL4965_MAX_RATE]; + + /* Radio/DSP gain settings for each scan rate, for directed scans. */ + struct il3945_scan_power_info scan_pwr_info[IL_NUM_SCAN_RATES]; +}; + +#define IL_TX_FIFO_BK 0 /* shared */ +#define IL_TX_FIFO_BE 1 +#define IL_TX_FIFO_VI 2 /* shared */ +#define IL_TX_FIFO_VO 3 +#define IL_TX_FIFO_UNUSED -1 + +/* Minimum number of queues. MAX_NUM is defined in hw specific files. + * Set the minimum to accommodate the 4 standard TX queues, 1 command + * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */ +#define IL_MIN_NUM_QUEUES 10 + +#define IL_DEFAULT_CMD_QUEUE_NUM 4 + +#define IEEE80211_DATA_LEN 2304 +#define IEEE80211_4ADDR_LEN 30 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) + +struct il_frame { + union { + struct ieee80211_hdr frame; + struct il_tx_beacon_cmd beacon; + u8 raw[IEEE80211_FRAME_LEN]; + u8 cmd[360]; + } u; + struct list_head list; +}; + +enum { + CMD_SYNC = 0, + CMD_SIZE_NORMAL = 0, + CMD_NO_SKB = 0, + CMD_SIZE_HUGE = (1 << 0), + CMD_ASYNC = (1 << 1), + CMD_WANT_SKB = (1 << 2), + CMD_MAPPED = (1 << 3), +}; + +#define DEF_CMD_PAYLOAD_SIZE 320 + +/** + * struct il_device_cmd + * + * For allocation of the command and tx queues, this establishes the overall + * size of the largest command we send to uCode, except for a scan command + * (which is relatively huge; space is allocated separately). + */ +struct il_device_cmd { + struct il_cmd_header hdr; /* uCode API */ + union { + u32 flags; + u8 val8; + u16 val16; + u32 val32; + struct il_tx_cmd tx; + u8 payload[DEF_CMD_PAYLOAD_SIZE]; + } __packed cmd; +} __packed; + +#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct il_device_cmd)) + +struct il_host_cmd { + const void *data; + unsigned long reply_page; + void (*callback) (struct il_priv *il, struct il_device_cmd *cmd, + struct il_rx_pkt *pkt); + u32 flags; + u16 len; + u8 id; +}; + +#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 +#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 +#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 + +/** + * struct il_rx_queue - Rx queue + * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) + * @bd_dma: bus address of buffer of receive buffer descriptors (rbd) + * @read: Shared idx to newest available Rx buffer + * @write: Shared idx to oldest written Rx packet + * @free_count: Number of pre-allocated buffers in rx_free + * @rx_free: list of free SKBs for use + * @rx_used: List of Rx buffers with no SKB + * @need_update: flag to indicate we need to update read/write idx + * @rb_stts: driver's pointer to receive buffer status + * @rb_stts_dma: bus address of receive buffer status + * + * NOTE: rx_free and rx_used are used as a FIFO for il_rx_bufs + */ +struct il_rx_queue { + __le32 *bd; + dma_addr_t bd_dma; + struct il_rx_buf pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; + struct il_rx_buf *queue[RX_QUEUE_SIZE]; + u32 read; + u32 write; + u32 free_count; + u32 write_actual; + struct list_head rx_free; + struct list_head rx_used; + int need_update; + struct il_rb_status *rb_stts; + dma_addr_t rb_stts_dma; + spinlock_t lock; +}; + +#define IL_SUPPORTED_RATES_IE_LEN 8 + +#define MAX_TID_COUNT 9 + +#define IL_INVALID_RATE 0xFF +#define IL_INVALID_VALUE -1 + +/** + * struct il_ht_agg -- aggregation status while waiting for block-ack + * @txq_id: Tx queue used for Tx attempt + * @frame_count: # frames attempted by Tx command + * @wait_for_ba: Expect block-ack before next Tx reply + * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx win + * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx win + * @bitmap1: High order, one bit for each frame pending ACK in Tx win + * @rate_n_flags: Rate at which Tx was attempted + * + * If C_TX indicates that aggregation was attempted, driver must wait + * for block ack (N_COMPRESSED_BA). This struct stores tx reply info + * until block ack arrives. + */ +struct il_ht_agg { + u16 txq_id; + u16 frame_count; + u16 wait_for_ba; + u16 start_idx; + u64 bitmap; + u32 rate_n_flags; +#define IL_AGG_OFF 0 +#define IL_AGG_ON 1 +#define IL_EMPTYING_HW_QUEUE_ADDBA 2 +#define IL_EMPTYING_HW_QUEUE_DELBA 3 + u8 state; +}; + +struct il_tid_data { + u16 seq_number; /* 4965 only */ + u16 tfds_in_queue; + struct il_ht_agg agg; +}; + +struct il_hw_key { + u32 cipher; + int keylen; + u8 keyidx; + u8 key[32]; +}; + +union il_ht_rate_supp { + u16 rates; + struct { + u8 siso_rate; + u8 mimo_rate; + }; +}; + +#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0) +#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1) +#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2) +#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3) +#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K +#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K +#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K + +/* + * Maximal MPDU density for TX aggregation + * 4 - 2us density + * 5 - 4us density + * 6 - 8us density + * 7 - 16us density + */ +#define CFG_HT_MPDU_DENSITY_2USEC (0x4) +#define CFG_HT_MPDU_DENSITY_4USEC (0x5) +#define CFG_HT_MPDU_DENSITY_8USEC (0x6) +#define CFG_HT_MPDU_DENSITY_16USEC (0x7) +#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC +#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC +#define CFG_HT_MPDU_DENSITY_MIN (0x1) + +struct il_ht_config { + bool single_chain_sufficient; + enum ieee80211_smps_mode smps; /* current smps mode */ +}; + +/* QoS structures */ +struct il_qos_info { + int qos_active; + struct il_qosparam_cmd def_qos_parm; +}; + +/* + * Structure should be accessed with sta_lock held. When station addition + * is in progress (IL_STA_UCODE_INPROGRESS) it is possible to access only + * the commands (il_addsta_cmd and il_link_quality_cmd) without + * sta_lock held. + */ +struct il_station_entry { + struct il_addsta_cmd sta; + struct il_tid_data tid[MAX_TID_COUNT]; + u8 used; + struct il_hw_key keyinfo; + struct il_link_quality_cmd *lq; +}; + +struct il_station_priv_common { + u8 sta_id; +}; + +/** + * struct il_vif_priv - driver's ilate per-interface information + * + * When mac80211 allocates a virtual interface, it can allocate + * space for us to put data into. + */ +struct il_vif_priv { + u8 ibss_bssid_sta_id; +}; + +/* one for each uCode image (inst/data, boot/init/runtime) */ +struct fw_desc { + void *v_addr; /* access by driver */ + dma_addr_t p_addr; /* access by card's busmaster DMA */ + u32 len; /* bytes */ +}; + +/* uCode file layout */ +struct il_ucode_header { + __le32 ver; /* major/minor/API/serial */ + struct { + __le32 inst_size; /* bytes of runtime code */ + __le32 data_size; /* bytes of runtime data */ + __le32 init_size; /* bytes of init code */ + __le32 init_data_size; /* bytes of init data */ + __le32 boot_size; /* bytes of bootstrap code */ + u8 data[0]; /* in same order as sizes */ + } v1; +}; + +struct il4965_ibss_seq { + u8 mac[ETH_ALEN]; + u16 seq_num; + u16 frag_num; + unsigned long packet_time; + struct list_head list; +}; + +struct il_sensitivity_ranges { + u16 min_nrg_cck; + u16 max_nrg_cck; + + u16 nrg_th_cck; + u16 nrg_th_ofdm; + + u16 auto_corr_min_ofdm; + u16 auto_corr_min_ofdm_mrc; + u16 auto_corr_min_ofdm_x1; + u16 auto_corr_min_ofdm_mrc_x1; + + u16 auto_corr_max_ofdm; + u16 auto_corr_max_ofdm_mrc; + u16 auto_corr_max_ofdm_x1; + u16 auto_corr_max_ofdm_mrc_x1; + + u16 auto_corr_max_cck; + u16 auto_corr_max_cck_mrc; + u16 auto_corr_min_cck; + u16 auto_corr_min_cck_mrc; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + +#define KELVIN_TO_CELSIUS(x) ((x)-273) +#define CELSIUS_TO_KELVIN(x) ((x)+273) + +/** + * struct il_hw_params + * @bcast_id: f/w broadcast station ID + * @max_txq_num: Max # Tx queues supported + * @dma_chnl_num: Number of Tx DMA/FIFO channels + * @scd_bc_tbls_size: size of scheduler byte count tables + * @tfd_size: TFD size + * @tx/rx_chains_num: Number of TX/RX chains + * @valid_tx/rx_ant: usable antennas + * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) + * @max_rxq_log: Log-base-2 of max_rxq_size + * @rx_page_order: Rx buffer page order + * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR + * @max_stations: + * @ht40_channel: is 40MHz width possible in band 2.4 + * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) + * @sw_crypto: 0 for hw, 1 for sw + * @max_xxx_size: for ucode uses + * @ct_kill_threshold: temperature threshold + * @beacon_time_tsf_bits: number of valid tsf bits for beacon time + * @struct il_sensitivity_ranges: range of sensitivity values + */ +struct il_hw_params { + u8 bcast_id; + u8 max_txq_num; + u8 dma_chnl_num; + u16 scd_bc_tbls_size; + u32 tfd_size; + u8 tx_chains_num; + u8 rx_chains_num; + u8 valid_tx_ant; + u8 valid_rx_ant; + u16 max_rxq_size; + u16 max_rxq_log; + u32 rx_page_order; + u32 rx_wrt_ptr_reg; + u8 max_stations; + u8 ht40_channel; + u8 max_beacon_itrvl; /* in 1024 ms */ + u32 max_inst_size; + u32 max_data_size; + u32 max_bsm_size; + u32 ct_kill_threshold; /* value in hw-dependent units */ + u16 beacon_time_tsf_bits; + const struct il_sensitivity_ranges *sens; +}; + +/****************************************************************************** + * + * Functions implemented in core module which are forward declared here + * for use by iwl-[4-5].c + * + * NOTE: The implementation of these functions are not hardware specific + * which is why they are in the core module files. + * + * Naming convention -- + * il_ <-- Is part of iwlwifi + * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) + * il4965_bg_ <-- Called from work queue context + * il4965_mac_ <-- mac80211 callback + * + ****************************************************************************/ +void il4965_update_chain_flags(struct il_priv *il); +extern const u8 il_bcast_addr[ETH_ALEN]; +int il_queue_space(const struct il_queue *q); +static inline int +il_queue_used(const struct il_queue *q, int i) +{ + return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && + i < q->write_ptr) : !(i < + q->read_ptr + && i >= + q-> + write_ptr); +} + +static inline u8 +il_get_cmd_idx(struct il_queue *q, u32 idx, int is_huge) +{ + /* + * This is for init calibration result and scan command which + * required buffer > TFD_MAX_PAYLOAD_SIZE, + * the big buffer at end of command array + */ + if (is_huge) + return q->n_win; /* must be power of 2 */ + + /* Otherwise, use normal size buffers */ + return idx & (q->n_win - 1); +} + +struct il_dma_ptr { + dma_addr_t dma; + void *addr; + size_t size; +}; + +#define IL_OPERATION_MODE_AUTO 0 +#define IL_OPERATION_MODE_HT_ONLY 1 +#define IL_OPERATION_MODE_MIXED 2 +#define IL_OPERATION_MODE_20MHZ 3 + +#define IL_TX_CRC_SIZE 4 +#define IL_TX_DELIMITER_SIZE 4 + +#define TX_POWER_IL_ILLEGAL_VOLTAGE -10000 + +/* Sensitivity and chain noise calibration */ +#define INITIALIZATION_VALUE 0xFFFF +#define IL4965_CAL_NUM_BEACONS 20 +#define IL_CAL_NUM_BEACONS 16 +#define MAXIMUM_ALLOWED_PATHLOSS 15 + +#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 + +#define MAX_FA_OFDM 50 +#define MIN_FA_OFDM 5 +#define MAX_FA_CCK 50 +#define MIN_FA_CCK 5 + +#define AUTO_CORR_STEP_OFDM 1 + +#define AUTO_CORR_STEP_CCK 3 +#define AUTO_CORR_MAX_TH_CCK 160 + +#define NRG_DIFF 2 +#define NRG_STEP_CCK 2 +#define NRG_MARGIN 8 +#define MAX_NUMBER_CCK_NO_FA 100 + +#define AUTO_CORR_CCK_MIN_VAL_DEF (125) + +#define CHAIN_A 0 +#define CHAIN_B 1 +#define CHAIN_C 2 +#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 +#define ALL_BAND_FILTER 0xFF00 +#define IN_BAND_FILTER 0xFF +#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF + +#define NRG_NUM_PREV_STAT_L 20 +#define NUM_RX_CHAINS 3 + +enum il4965_false_alarm_state { + IL_FA_TOO_MANY = 0, + IL_FA_TOO_FEW = 1, + IL_FA_GOOD_RANGE = 2, +}; + +enum il4965_chain_noise_state { + IL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ + IL_CHAIN_NOISE_ACCUMULATE, + IL_CHAIN_NOISE_CALIBRATED, + IL_CHAIN_NOISE_DONE, +}; + +enum ucode_type { + UCODE_NONE = 0, + UCODE_INIT, + UCODE_RT +}; + +/* Sensitivity calib data */ +struct il_sensitivity_data { + u32 auto_corr_ofdm; + u32 auto_corr_ofdm_mrc; + u32 auto_corr_ofdm_x1; + u32 auto_corr_ofdm_mrc_x1; + u32 auto_corr_cck; + u32 auto_corr_cck_mrc; + + u32 last_bad_plcp_cnt_ofdm; + u32 last_fa_cnt_ofdm; + u32 last_bad_plcp_cnt_cck; + u32 last_fa_cnt_cck; + + u32 nrg_curr_state; + u32 nrg_prev_state; + u32 nrg_value[10]; + u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; + u32 nrg_silence_ref; + u32 nrg_energy_idx; + u32 nrg_silence_idx; + u32 nrg_th_cck; + s32 nrg_auto_corr_silence_diff; + u32 num_in_cck_no_fa; + u32 nrg_th_ofdm; + + u16 barker_corr_th_min; + u16 barker_corr_th_min_mrc; + u16 nrg_th_cca; +}; + +/* Chain noise (differential Rx gain) calib data */ +struct il_chain_noise_data { + u32 active_chains; + u32 chain_noise_a; + u32 chain_noise_b; + u32 chain_noise_c; + u32 chain_signal_a; + u32 chain_signal_b; + u32 chain_signal_c; + u16 beacon_count; + u8 disconn_array[NUM_RX_CHAINS]; + u8 delta_gain_code[NUM_RX_CHAINS]; + u8 radio_write; + u8 state; +}; + +#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ +#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ + +#define IL_TRAFFIC_ENTRIES (256) +#define IL_TRAFFIC_ENTRY_SIZE (64) + +enum { + MEASUREMENT_READY = (1 << 0), + MEASUREMENT_ACTIVE = (1 << 1), +}; + +/* interrupt stats */ +struct isr_stats { + u32 hw; + u32 sw; + u32 err_code; + u32 sch; + u32 alive; + u32 rfkill; + u32 ctkill; + u32 wakeup; + u32 rx; + u32 handlers[IL_CN_MAX]; + u32 tx; + u32 unhandled; +}; + +/* management stats */ +enum il_mgmt_stats { + MANAGEMENT_ASSOC_REQ = 0, + MANAGEMENT_ASSOC_RESP, + MANAGEMENT_REASSOC_REQ, + MANAGEMENT_REASSOC_RESP, + MANAGEMENT_PROBE_REQ, + MANAGEMENT_PROBE_RESP, + MANAGEMENT_BEACON, + MANAGEMENT_ATIM, + MANAGEMENT_DISASSOC, + MANAGEMENT_AUTH, + MANAGEMENT_DEAUTH, + MANAGEMENT_ACTION, + MANAGEMENT_MAX, +}; +/* control stats */ +enum il_ctrl_stats { + CONTROL_BACK_REQ = 0, + CONTROL_BACK, + CONTROL_PSPOLL, + CONTROL_RTS, + CONTROL_CTS, + CONTROL_ACK, + CONTROL_CFEND, + CONTROL_CFENDACK, + CONTROL_MAX, +}; + +struct traffic_stats { +#ifdef CONFIG_IWLEGACY_DEBUGFS + u32 mgmt[MANAGEMENT_MAX]; + u32 ctrl[CONTROL_MAX]; + u32 data_cnt; + u64 data_bytes; +#endif +}; + +/* + * host interrupt timeout value + * used with setting interrupt coalescing timer + * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit + * + * default interrupt coalescing timer is 64 x 32 = 2048 usecs + * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs + */ +#define IL_HOST_INT_TIMEOUT_MAX (0xFF) +#define IL_HOST_INT_TIMEOUT_DEF (0x40) +#define IL_HOST_INT_TIMEOUT_MIN (0x0) +#define IL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) +#define IL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) +#define IL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) + +#define IL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) + +/* TX queue watchdog timeouts in mSecs */ +#define IL_DEF_WD_TIMEOUT (2000) +#define IL_LONG_WD_TIMEOUT (10000) +#define IL_MAX_WD_TIMEOUT (120000) + +struct il_force_reset { + int reset_request_count; + int reset_success_count; + int reset_reject_count; + unsigned long reset_duration; + unsigned long last_force_reset_jiffies; +}; + +/* extend beacon time format bit shifting */ +/* + * for _3945 devices + * bits 31:24 - extended + * bits 23:0 - interval + */ +#define IL3945_EXT_BEACON_TIME_POS 24 +/* + * for _4965 devices + * bits 31:22 - extended + * bits 21:0 - interval + */ +#define IL4965_EXT_BEACON_TIME_POS 22 + +struct il_rxon_context { + struct ieee80211_vif *vif; +}; + +struct il_power_mgr { + struct il_powertable_cmd sleep_cmd; + struct il_powertable_cmd sleep_cmd_next; + int debug_sleep_level_override; + bool pci_pm; + bool ps_disabled; +}; + +struct il_priv { + struct ieee80211_hw *hw; + struct ieee80211_channel *ieee_channels; + struct ieee80211_rate *ieee_rates; + + struct il_cfg *cfg; + const struct il_ops *ops; +#ifdef CONFIG_IWLEGACY_DEBUGFS + const struct il_debugfs_ops *debugfs_ops; +#endif + + /* temporary frame storage list */ + struct list_head free_frames; + int frames_count; + + enum ieee80211_band band; + int alloc_rxb_page; + + void (*handlers[IL_CN_MAX]) (struct il_priv *il, + struct il_rx_buf *rxb); + + struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; + + /* spectrum measurement report caching */ + struct il_spectrum_notification measure_report; + u8 measurement_status; + + /* ucode beacon time */ + u32 ucode_beacon_time; + int missed_beacon_threshold; + + /* track IBSS manager (last beacon) status */ + u32 ibss_manager; + + /* force reset */ + struct il_force_reset force_reset; + + /* we allocate array of il_channel_info for NIC's valid channels. + * Access via channel # using indirect idx array */ + struct il_channel_info *channel_info; /* channel info array */ + u8 channel_count; /* # of channels */ + + /* thermal calibration */ + s32 temperature; /* degrees Kelvin */ + s32 last_temperature; + + /* Scan related variables */ + unsigned long scan_start; + unsigned long scan_start_tsf; + void *scan_cmd; + enum ieee80211_band scan_band; + struct cfg80211_scan_request *scan_request; + struct ieee80211_vif *scan_vif; + u8 scan_tx_ant[IEEE80211_NUM_BANDS]; + u8 mgmt_tx_ant; + + /* spinlock */ + spinlock_t lock; /* protect general shared data */ + spinlock_t hcmd_lock; /* protect hcmd */ + spinlock_t reg_lock; /* protect hw register access */ + struct mutex mutex; + + /* basic pci-network driver stuff */ + struct pci_dev *pci_dev; + + /* pci hardware address support */ + void __iomem *hw_base; + u32 hw_rev; + u32 hw_wa_rev; + u8 rev_id; + + /* command queue number */ + u8 cmd_queue; + + /* max number of station keys */ + u8 sta_key_max_num; + + /* EEPROM MAC addresses */ + struct mac_address addresses[1]; + + /* uCode images, save to reload in case of failure */ + int fw_idx; /* firmware we're trying to load */ + u32 ucode_ver; /* version of ucode, copy of + il_ucode.ver */ + struct fw_desc ucode_code; /* runtime inst */ + struct fw_desc ucode_data; /* runtime data original */ + struct fw_desc ucode_data_backup; /* runtime data save/restore */ + struct fw_desc ucode_init; /* initialization inst */ + struct fw_desc ucode_init_data; /* initialization data */ + struct fw_desc ucode_boot; /* bootstrap inst */ + enum ucode_type ucode_type; + u8 ucode_write_complete; /* the image write is complete */ + char firmware_name[25]; + + struct ieee80211_vif *vif; + + struct il_qos_info qos_data; + + struct { + bool enabled; + bool is_40mhz; + bool non_gf_sta_present; + u8 protection; + u8 extension_chan_offset; + } ht; + + /* + * We declare this const so it can only be + * changed via explicit cast within the + * routines that actually update the physical + * hardware. + */ + const struct il_rxon_cmd active; + struct il_rxon_cmd staging; + + struct il_rxon_time_cmd timing; + + __le16 switch_channel; + + /* 1st responses from initialize and runtime uCode images. + * _4965's initialize alive response contains some calibration data. */ + struct il_init_alive_resp card_alive_init; + struct il_alive_resp card_alive; + + u16 active_rate; + + u8 start_calib; + struct il_sensitivity_data sensitivity_data; + struct il_chain_noise_data chain_noise_data; + __le16 sensitivity_tbl[HD_TBL_SIZE]; + + struct il_ht_config current_ht_config; + + /* Rate scaling data */ + u8 retry_rate; + + wait_queue_head_t wait_command_queue; + + int activity_timer_active; + + /* Rx and Tx DMA processing queues */ + struct il_rx_queue rxq; + struct il_tx_queue *txq; + unsigned long txq_ctx_active_msk; + struct il_dma_ptr kw; /* keep warm address */ + struct il_dma_ptr scd_bc_tbls; + + u32 scd_base_addr; /* scheduler sram base address */ + + unsigned long status; + + /* counts mgmt, ctl, and data packets */ + struct traffic_stats tx_stats; + struct traffic_stats rx_stats; + + /* counts interrupts */ + struct isr_stats isr_stats; + + struct il_power_mgr power_data; + + /* context information */ + u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */ + + /* station table variables */ + + /* Note: if lock and sta_lock are needed, lock must be acquired first */ + spinlock_t sta_lock; + int num_stations; + struct il_station_entry stations[IL_STATION_COUNT]; + unsigned long ucode_key_table; + + /* queue refcounts */ +#define IL_MAX_HW_QUEUES 32 + unsigned long queue_stopped[BITS_TO_LONGS(IL_MAX_HW_QUEUES)]; +#define IL_STOP_REASON_PASSIVE 0 + unsigned long stop_reason; + /* for each AC */ + atomic_t queue_stop_count[4]; + + /* Indication if ieee80211_ops->open has been called */ + u8 is_open; + + u8 mac80211_registered; + + /* eeprom -- this is in the card's little endian byte order */ + u8 *eeprom; + struct il_eeprom_calib_info *calib_info; + + enum nl80211_iftype iw_mode; + + /* Last Rx'd beacon timestamp */ + u64 timestamp; + + union { +#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE) + struct { + void *shared_virt; + dma_addr_t shared_phys; + + struct delayed_work thermal_periodic; + struct delayed_work rfkill_poll; + + struct il3945_notif_stats stats; +#ifdef CONFIG_IWLEGACY_DEBUGFS + struct il3945_notif_stats accum_stats; + struct il3945_notif_stats delta_stats; + struct il3945_notif_stats max_delta; +#endif + + u32 sta_supp_rates; + int last_rx_rssi; /* From Rx packet stats */ + + /* Rx'd packet timing information */ + u32 last_beacon_time; + u64 last_tsf; + + /* + * each calibration channel group in the + * EEPROM has a derived clip setting for + * each rate. + */ + const struct il3945_clip_group clip_groups[5]; + + } _3945; +#endif +#if defined(CONFIG_IWL4965) || defined(CONFIG_IWL4965_MODULE) + struct { + struct il_rx_phy_res last_phy_res; + bool last_phy_res_valid; + u32 ampdu_ref; + + struct completion firmware_loading_complete; + + /* + * chain noise reset and gain commands are the + * two extra calibration commands follows the standard + * phy calibration commands + */ + u8 phy_calib_chain_noise_reset_cmd; + u8 phy_calib_chain_noise_gain_cmd; + + u8 key_mapping_keys; + struct il_wep_key wep_keys[WEP_KEYS_MAX]; + + struct il_notif_stats stats; +#ifdef CONFIG_IWLEGACY_DEBUGFS + struct il_notif_stats accum_stats; + struct il_notif_stats delta_stats; + struct il_notif_stats max_delta; +#endif + + } _4965; +#endif + }; + + struct il_hw_params hw_params; + + u32 inta_mask; + + struct workqueue_struct *workqueue; + + struct work_struct restart; + struct work_struct scan_completed; + struct work_struct rx_replenish; + struct work_struct abort_scan; + + bool beacon_enabled; + struct sk_buff *beacon_skb; + + struct work_struct tx_flush; + + struct tasklet_struct irq_tasklet; + + struct delayed_work init_alive_start; + struct delayed_work alive_start; + struct delayed_work scan_check; + + /* TX Power */ + s8 tx_power_user_lmt; + s8 tx_power_device_lmt; + s8 tx_power_next; + +#ifdef CONFIG_IWLEGACY_DEBUG + /* debugging info */ + u32 debug_level; /* per device debugging will override global + il_debug_level if set */ +#endif /* CONFIG_IWLEGACY_DEBUG */ +#ifdef CONFIG_IWLEGACY_DEBUGFS + /* debugfs */ + u16 tx_traffic_idx; + u16 rx_traffic_idx; + u8 *tx_traffic; + u8 *rx_traffic; + struct dentry *debugfs_dir; + u32 dbgfs_sram_offset, dbgfs_sram_len; + bool disable_ht40; +#endif /* CONFIG_IWLEGACY_DEBUGFS */ + + struct work_struct txpower_work; + u32 disable_sens_cal; + u32 disable_chain_noise_cal; + u32 disable_tx_power_cal; + struct work_struct run_time_calib_work; + struct timer_list stats_periodic; + struct timer_list watchdog; + bool hw_ready; + + struct led_classdev led; + unsigned long blink_on, blink_off; + bool led_registered; +}; /*il_priv */ + +static inline void +il_txq_ctx_activate(struct il_priv *il, int txq_id) +{ + set_bit(txq_id, &il->txq_ctx_active_msk); +} + +static inline void +il_txq_ctx_deactivate(struct il_priv *il, int txq_id) +{ + clear_bit(txq_id, &il->txq_ctx_active_msk); +} + +static inline int +il_is_associated(struct il_priv *il) +{ + return (il->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; +} + +static inline int +il_is_any_associated(struct il_priv *il) +{ + return il_is_associated(il); +} + +static inline int +il_is_channel_valid(const struct il_channel_info *ch_info) +{ + if (ch_info == NULL) + return 0; + return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; +} + +static inline int +il_is_channel_radar(const struct il_channel_info *ch_info) +{ + return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; +} + +static inline u8 +il_is_channel_a_band(const struct il_channel_info *ch_info) +{ + return ch_info->band == IEEE80211_BAND_5GHZ; +} + +static inline int +il_is_channel_passive(const struct il_channel_info *ch) +{ + return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; +} + +static inline int +il_is_channel_ibss(const struct il_channel_info *ch) +{ + return (ch->flags & EEPROM_CHANNEL_IBSS) ? 1 : 0; +} + +static inline void +__il_free_pages(struct il_priv *il, struct page *page) +{ + __free_pages(page, il->hw_params.rx_page_order); + il->alloc_rxb_page--; +} + +static inline void +il_free_pages(struct il_priv *il, unsigned long page) +{ + free_pages(page, il->hw_params.rx_page_order); + il->alloc_rxb_page--; +} + +#define IWLWIFI_VERSION "in-tree:" +#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation" +#define DRV_AUTHOR "" + +#define IL_PCI_DEVICE(dev, subdev, cfg) \ + .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = (subdev), \ + .driver_data = (kernel_ulong_t)&(cfg) + +#define TIME_UNIT 1024 + +#define IL_SKU_G 0x1 +#define IL_SKU_A 0x2 +#define IL_SKU_N 0x8 + +#define IL_CMD(x) case x: return #x + +/* Size of one Rx buffer in host DRAM */ +#define IL_RX_BUF_SIZE_3K (3 * 1000) /* 3945 only */ +#define IL_RX_BUF_SIZE_4K (4 * 1024) +#define IL_RX_BUF_SIZE_8K (8 * 1024) + +#ifdef CONFIG_IWLEGACY_DEBUGFS +struct il_debugfs_ops { + ssize_t(*rx_stats_read) (struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); + ssize_t(*tx_stats_read) (struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); + ssize_t(*general_stats_read) (struct file *file, + char __user *user_buf, size_t count, + loff_t *ppos); +}; +#endif + +struct il_ops { + /* Handling TX */ + void (*txq_update_byte_cnt_tbl) (struct il_priv *il, + struct il_tx_queue *txq, + u16 byte_cnt); + int (*txq_attach_buf_to_tfd) (struct il_priv *il, + struct il_tx_queue *txq, dma_addr_t addr, + u16 len, u8 reset, u8 pad); + void (*txq_free_tfd) (struct il_priv *il, struct il_tx_queue *txq); + int (*txq_init) (struct il_priv *il, struct il_tx_queue *txq); + /* alive notification after init uCode load */ + void (*init_alive_start) (struct il_priv *il); + /* check validity of rtc data address */ + int (*is_valid_rtc_data_addr) (u32 addr); + /* 1st ucode load */ + int (*load_ucode) (struct il_priv *il); + + void (*dump_nic_error_log) (struct il_priv *il); + int (*dump_fh) (struct il_priv *il, char **buf, bool display); + int (*set_channel_switch) (struct il_priv *il, + struct ieee80211_channel_switch *ch_switch); + /* power management */ + int (*apm_init) (struct il_priv *il); + + /* tx power */ + int (*send_tx_power) (struct il_priv *il); + void (*update_chain_flags) (struct il_priv *il); + + /* eeprom operations */ + int (*eeprom_acquire_semaphore) (struct il_priv *il); + void (*eeprom_release_semaphore) (struct il_priv *il); + + int (*rxon_assoc) (struct il_priv *il); + int (*commit_rxon) (struct il_priv *il); + void (*set_rxon_chain) (struct il_priv *il); + + u16(*get_hcmd_size) (u8 cmd_id, u16 len); + u16(*build_addsta_hcmd) (const struct il_addsta_cmd *cmd, u8 *data); + + int (*request_scan) (struct il_priv *il, struct ieee80211_vif *vif); + void (*post_scan) (struct il_priv *il); + void (*post_associate) (struct il_priv *il); + void (*config_ap) (struct il_priv *il); + /* station management */ + int (*update_bcast_stations) (struct il_priv *il); + int (*manage_ibss_station) (struct il_priv *il, + struct ieee80211_vif *vif, bool add); + + int (*send_led_cmd) (struct il_priv *il, struct il_led_cmd *led_cmd); +}; + +struct il_mod_params { + int sw_crypto; /* def: 0 = using hardware encryption */ + int disable_hw_scan; /* def: 0 = use h/w scan */ + int num_of_queues; /* def: HW dependent */ + int disable_11n; /* def: 0 = 11n capabilities enabled */ + int amsdu_size_8K; /* def: 0 = disable 8K amsdu size */ + int antenna; /* def: 0 = both antennas (use diversity) */ + int restart_fw; /* def: 1 = restart firmware */ +}; + +#define IL_LED_SOLID 11 +#define IL_DEF_LED_INTRVL cpu_to_le32(1000) + +#define IL_LED_ACTIVITY (0<<1) +#define IL_LED_LINK (1<<1) + +/* + * LED mode + * IL_LED_DEFAULT: use device default + * IL_LED_RF_STATE: turn LED on/off based on RF state + * LED ON = RF ON + * LED OFF = RF OFF + * IL_LED_BLINK: adjust led blink rate based on blink table + */ +enum il_led_mode { + IL_LED_DEFAULT, + IL_LED_RF_STATE, + IL_LED_BLINK, +}; + +void il_leds_init(struct il_priv *il); +void il_leds_exit(struct il_priv *il); + +/** + * struct il_cfg + * @fw_name_pre: Firmware filename prefix. The api version and extension + * (.ucode) will be added to filename before loading from disk. The + * filename is constructed as fw_name_pre.ucode. + * @ucode_api_max: Highest version of uCode API supported by driver. + * @ucode_api_min: Lowest version of uCode API supported by driver. + * @scan_antennas: available antenna for scan operation + * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) + * + * We enable the driver to be backward compatible wrt API version. The + * driver specifies which APIs it supports (with @ucode_api_max being the + * highest and @ucode_api_min the lowest). Firmware will only be loaded if + * it has a supported API version. The firmware's API version will be + * stored in @il_priv, enabling the driver to make runtime changes based + * on firmware version used. + * + * For example, + * if (IL_UCODE_API(il->ucode_ver) >= 2) { + * Driver interacts with Firmware API version >= 2. + * } else { + * Driver interacts with Firmware API version 1. + * } + * + * The ideal usage of this infrastructure is to treat a new ucode API + * release as a new hardware revision. That is, through utilizing the + * il_hcmd_utils_ops etc. we accommodate different command structures + * and flows between hardware versions as well as their API + * versions. + * + */ +struct il_cfg { + /* params specific to an individual device within a device family */ + const char *name; + const char *fw_name_pre; + const unsigned int ucode_api_max; + const unsigned int ucode_api_min; + u8 valid_tx_ant; + u8 valid_rx_ant; + unsigned int sku; + u16 eeprom_ver; + u16 eeprom_calib_ver; + /* module based parameters which can be set from modprobe cmd */ + const struct il_mod_params *mod_params; + /* params not likely to change within a device family */ + struct il_base_params *base_params; + /* params likely to change within a device family */ + u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; + enum il_led_mode led_mode; + + int eeprom_size; + int num_of_queues; /* def: HW dependent */ + int num_of_ampdu_queues; /* def: HW dependent */ + /* for il_apm_init() */ + u32 pll_cfg_val; + bool set_l0s; + bool use_bsm; + + u16 led_compensation; + int chain_noise_num_beacons; + unsigned int wd_timeout; + bool temperature_kelvin; + const bool ucode_tracing; + const bool sensitivity_calib_by_driver; + const bool chain_noise_calib_by_driver; + + const u32 regulatory_bands[7]; +}; + +/*************************** + * L i b * + ***************************/ + +int il_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u16 queue, const struct ieee80211_tx_queue_params *params); +int il_mac_tx_last_beacon(struct ieee80211_hw *hw); + +void il_set_rxon_hwcrypto(struct il_priv *il, int hw_decrypt); +int il_check_rxon_cmd(struct il_priv *il); +int il_full_rxon_required(struct il_priv *il); +int il_set_rxon_channel(struct il_priv *il, struct ieee80211_channel *ch); +void il_set_flags_for_band(struct il_priv *il, enum ieee80211_band band, + struct ieee80211_vif *vif); +u8 il_get_single_channel_number(struct il_priv *il, enum ieee80211_band band); +void il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf); +bool il_is_ht40_tx_allowed(struct il_priv *il, + struct ieee80211_sta_ht_cap *ht_cap); +void il_connection_init_rx_config(struct il_priv *il); +void il_set_rate(struct il_priv *il); +int il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr, + u32 decrypt_res, struct ieee80211_rx_status *stats); +void il_irq_handle_error(struct il_priv *il); +int il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); +void il_mac_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); +int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + enum nl80211_iftype newtype, bool newp2p); +void il_mac_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + u32 queues, bool drop); +int il_alloc_txq_mem(struct il_priv *il); +void il_free_txq_mem(struct il_priv *il); + +#ifdef CONFIG_IWLEGACY_DEBUGFS +void il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len); +#else +static inline void +il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len) +{ +} +#endif + +/***************************************************** + * Handlers + ***************************************************/ +void il_hdl_pm_sleep(struct il_priv *il, struct il_rx_buf *rxb); +void il_hdl_pm_debug_stats(struct il_priv *il, struct il_rx_buf *rxb); +void il_hdl_error(struct il_priv *il, struct il_rx_buf *rxb); +void il_hdl_csa(struct il_priv *il, struct il_rx_buf *rxb); + +/***************************************************** +* RX +******************************************************/ +void il_cmd_queue_unmap(struct il_priv *il); +void il_cmd_queue_free(struct il_priv *il); +int il_rx_queue_alloc(struct il_priv *il); +void il_rx_queue_update_write_ptr(struct il_priv *il, struct il_rx_queue *q); +int il_rx_queue_space(const struct il_rx_queue *q); +void il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb); + +void il_hdl_spectrum_measurement(struct il_priv *il, struct il_rx_buf *rxb); +void il_recover_from_stats(struct il_priv *il, struct il_rx_pkt *pkt); +void il_chswitch_done(struct il_priv *il, bool is_success); + +/***************************************************** +* TX +******************************************************/ +void il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq); +int il_tx_queue_init(struct il_priv *il, u32 txq_id); +void il_tx_queue_reset(struct il_priv *il, u32 txq_id); +void il_tx_queue_unmap(struct il_priv *il, int txq_id); +void il_tx_queue_free(struct il_priv *il, int txq_id); +void il_setup_watchdog(struct il_priv *il); +/***************************************************** + * TX power + ****************************************************/ +int il_set_tx_power(struct il_priv *il, s8 tx_power, bool force); + +/******************************************************************************* + * Rate + ******************************************************************************/ + +u8 il_get_lowest_plcp(struct il_priv *il); + +/******************************************************************************* + * Scanning + ******************************************************************************/ +void il_init_scan_params(struct il_priv *il); +int il_scan_cancel(struct il_priv *il); +int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms); +void il_force_scan_end(struct il_priv *il); +int il_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_scan_request *hw_req); +void il_internal_short_hw_scan(struct il_priv *il); +int il_force_reset(struct il_priv *il, bool external); +u16 il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame, + const u8 *ta, const u8 *ie, int ie_len, int left); +void il_setup_rx_scan_handlers(struct il_priv *il); +u16 il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band, + u8 n_probes); +u16 il_get_passive_dwell_time(struct il_priv *il, enum ieee80211_band band, + struct ieee80211_vif *vif); +void il_setup_scan_deferred_work(struct il_priv *il); +void il_cancel_scan_deferred_work(struct il_priv *il); + +/* For faster active scanning, scan will move to the next channel if fewer than + * PLCP_QUIET_THRESH packets are heard on this channel within + * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell + * time if it's a quiet channel (nothing responded to our probe, and there's + * no other traffic). + * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ +#define IL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */ +#define IL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */ + +#define IL_SCAN_CHECK_WATCHDOG (HZ * 7) + +/***************************************************** + * S e n d i n g H o s t C o m m a n d s * + *****************************************************/ + +const char *il_get_cmd_string(u8 cmd); +int __must_check il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd); +int il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd); +int __must_check il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len, + const void *data); +int il_send_cmd_pdu_async(struct il_priv *il, u8 id, u16 len, const void *data, + void (*callback) (struct il_priv *il, + struct il_device_cmd *cmd, + struct il_rx_pkt *pkt)); + +int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd); + +/***************************************************** + * PCI * + *****************************************************/ + +void il_bg_watchdog(unsigned long data); +u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval); +__le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon, + u32 beacon_interval); + +#ifdef CONFIG_PM_SLEEP +extern const struct dev_pm_ops il_pm_ops; + +#define IL_LEGACY_PM_OPS (&il_pm_ops) + +#else /* !CONFIG_PM_SLEEP */ + +#define IL_LEGACY_PM_OPS NULL + +#endif /* !CONFIG_PM_SLEEP */ + +/***************************************************** +* Error Handling Debugging +******************************************************/ +void il4965_dump_nic_error_log(struct il_priv *il); +#ifdef CONFIG_IWLEGACY_DEBUG +void il_print_rx_config_cmd(struct il_priv *il); +#else +static inline void +il_print_rx_config_cmd(struct il_priv *il) +{ +} +#endif + +void il_clear_isr_stats(struct il_priv *il); + +/***************************************************** +* GEOS +******************************************************/ +int il_init_geos(struct il_priv *il); +void il_free_geos(struct il_priv *il); + +/*************** DRIVER STATUS FUNCTIONS *****/ + +#define S_HCMD_ACTIVE 0 /* host command in progress */ +/* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */ +#define S_INT_ENABLED 2 +#define S_RFKILL 3 +#define S_CT_KILL 4 +#define S_INIT 5 +#define S_ALIVE 6 +#define S_READY 7 +#define S_TEMPERATURE 8 +#define S_GEO_CONFIGURED 9 +#define S_EXIT_PENDING 10 +#define S_STATS 12 +#define S_SCANNING 13 +#define S_SCAN_ABORTING 14 +#define S_SCAN_HW 15 +#define S_POWER_PMI 16 +#define S_FW_ERROR 17 +#define S_CHANNEL_SWITCH_PENDING 18 + +static inline int +il_is_ready(struct il_priv *il) +{ + /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are + * set but EXIT_PENDING is not */ + return test_bit(S_READY, &il->status) && + test_bit(S_GEO_CONFIGURED, &il->status) && + !test_bit(S_EXIT_PENDING, &il->status); +} + +static inline int +il_is_alive(struct il_priv *il) +{ + return test_bit(S_ALIVE, &il->status); +} + +static inline int +il_is_init(struct il_priv *il) +{ + return test_bit(S_INIT, &il->status); +} + +static inline int +il_is_rfkill(struct il_priv *il) +{ + return test_bit(S_RFKILL, &il->status); +} + +static inline int +il_is_ctkill(struct il_priv *il) +{ + return test_bit(S_CT_KILL, &il->status); +} + +static inline int +il_is_ready_rf(struct il_priv *il) +{ + + if (il_is_rfkill(il)) + return 0; + + return il_is_ready(il); +} + +void il_send_bt_config(struct il_priv *il); +int il_send_stats_request(struct il_priv *il, u8 flags, bool clear); +void il_apm_stop(struct il_priv *il); +void _il_apm_stop(struct il_priv *il); + +int il_apm_init(struct il_priv *il); + +int il_send_rxon_timing(struct il_priv *il); + +static inline int +il_send_rxon_assoc(struct il_priv *il) +{ + return il->ops->rxon_assoc(il); +} + +static inline int +il_commit_rxon(struct il_priv *il) +{ + return il->ops->commit_rxon(il); +} + +static inline const struct ieee80211_supported_band * +il_get_hw_mode(struct il_priv *il, enum ieee80211_band band) +{ + return il->hw->wiphy->bands[band]; +} + +/* mac80211 handlers */ +int il_mac_config(struct ieee80211_hw *hw, u32 changed); +void il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif); +void il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, u32 changes); +void il_tx_cmd_protection(struct il_priv *il, struct ieee80211_tx_info *info, + __le16 fc, __le32 *tx_flags); + +irqreturn_t il_isr(int irq, void *data); + +void il_set_bit(struct il_priv *p, u32 r, u32 m); +void il_clear_bit(struct il_priv *p, u32 r, u32 m); +bool _il_grab_nic_access(struct il_priv *il); +int _il_poll_bit(struct il_priv *il, u32 addr, u32 bits, u32 mask, int timeout); +int il_poll_bit(struct il_priv *il, u32 addr, u32 mask, int timeout); +u32 il_rd_prph(struct il_priv *il, u32 reg); +void il_wr_prph(struct il_priv *il, u32 addr, u32 val); +u32 il_read_targ_mem(struct il_priv *il, u32 addr); +void il_write_targ_mem(struct il_priv *il, u32 addr, u32 val); + +static inline bool il_need_reclaim(struct il_priv *il, struct il_rx_pkt *pkt) +{ + /* Reclaim a command buffer only if this packet is a response + * to a (driver-originated) command. If the packet (e.g. Rx frame) + * originated from uCode, there is no command buffer to reclaim. + * Ucode should set SEQ_RX_FRAME bit if ucode-originated, but + * apparently a few don't get set; catch them here. + */ + return !(pkt->hdr.sequence & SEQ_RX_FRAME) && + pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX && + pkt->hdr.cmd != N_RX_PHY && pkt->hdr.cmd != N_RX && + pkt->hdr.cmd != N_RX_MPDU && pkt->hdr.cmd != N_COMPRESSED_BA; +} + +static inline void +_il_write8(struct il_priv *il, u32 ofs, u8 val) +{ + writeb(val, il->hw_base + ofs); +} +#define il_write8(il, ofs, val) _il_write8(il, ofs, val) + +static inline void +_il_wr(struct il_priv *il, u32 ofs, u32 val) +{ + writel(val, il->hw_base + ofs); +} + +static inline u32 +_il_rd(struct il_priv *il, u32 ofs) +{ + return readl(il->hw_base + ofs); +} + +static inline void +_il_clear_bit(struct il_priv *il, u32 reg, u32 mask) +{ + _il_wr(il, reg, _il_rd(il, reg) & ~mask); +} + +static inline void +_il_set_bit(struct il_priv *il, u32 reg, u32 mask) +{ + _il_wr(il, reg, _il_rd(il, reg) | mask); +} + +static inline void +_il_release_nic_access(struct il_priv *il) +{ + _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + /* + * In above we are reading CSR_GP_CNTRL register, what will flush any + * previous writes, but still want write, which clear MAC_ACCESS_REQ + * bit, be performed on PCI bus before any other writes scheduled on + * different CPUs (after we drop reg_lock). + */ + mmiowb(); +} + +static inline u32 +il_rd(struct il_priv *il, u32 reg) +{ + u32 value; + unsigned long reg_flags; + + spin_lock_irqsave(&il->reg_lock, reg_flags); + _il_grab_nic_access(il); + value = _il_rd(il, reg); + _il_release_nic_access(il); + spin_unlock_irqrestore(&il->reg_lock, reg_flags); + return value; +} + +static inline void +il_wr(struct il_priv *il, u32 reg, u32 value) +{ + unsigned long reg_flags; + + spin_lock_irqsave(&il->reg_lock, reg_flags); + if (likely(_il_grab_nic_access(il))) { + _il_wr(il, reg, value); + _il_release_nic_access(il); + } + spin_unlock_irqrestore(&il->reg_lock, reg_flags); +} + +static inline u32 +_il_rd_prph(struct il_priv *il, u32 reg) +{ + _il_wr(il, HBUS_TARG_PRPH_RADDR, reg | (3 << 24)); + return _il_rd(il, HBUS_TARG_PRPH_RDAT); +} + +static inline void +_il_wr_prph(struct il_priv *il, u32 addr, u32 val) +{ + _il_wr(il, HBUS_TARG_PRPH_WADDR, ((addr & 0x0000FFFF) | (3 << 24))); + _il_wr(il, HBUS_TARG_PRPH_WDAT, val); +} + +static inline void +il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask) +{ + unsigned long reg_flags; + + spin_lock_irqsave(&il->reg_lock, reg_flags); + if (likely(_il_grab_nic_access(il))) { + _il_wr_prph(il, reg, (_il_rd_prph(il, reg) | mask)); + _il_release_nic_access(il); + } + spin_unlock_irqrestore(&il->reg_lock, reg_flags); +} + +static inline void +il_set_bits_mask_prph(struct il_priv *il, u32 reg, u32 bits, u32 mask) +{ + unsigned long reg_flags; + + spin_lock_irqsave(&il->reg_lock, reg_flags); + if (likely(_il_grab_nic_access(il))) { + _il_wr_prph(il, reg, ((_il_rd_prph(il, reg) & mask) | bits)); + _il_release_nic_access(il); + } + spin_unlock_irqrestore(&il->reg_lock, reg_flags); +} + +static inline void +il_clear_bits_prph(struct il_priv *il, u32 reg, u32 mask) +{ + unsigned long reg_flags; + u32 val; + + spin_lock_irqsave(&il->reg_lock, reg_flags); + if (likely(_il_grab_nic_access(il))) { + val = _il_rd_prph(il, reg); + _il_wr_prph(il, reg, (val & ~mask)); + _il_release_nic_access(il); + } + spin_unlock_irqrestore(&il->reg_lock, reg_flags); +} + +#define HW_KEY_DYNAMIC 0 +#define HW_KEY_DEFAULT 1 + +#define IL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */ +#define IL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */ +#define IL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of + being activated */ +#define IL_STA_LOCAL BIT(3) /* station state not directed by mac80211; + (this is for the IBSS BSSID stations) */ +#define IL_STA_BCAST BIT(4) /* this station is the special bcast station */ + +void il_restore_stations(struct il_priv *il); +void il_clear_ucode_stations(struct il_priv *il); +void il_dealloc_bcast_stations(struct il_priv *il); +int il_get_free_ucode_key_idx(struct il_priv *il); +int il_send_add_sta(struct il_priv *il, struct il_addsta_cmd *sta, u8 flags); +int il_add_station_common(struct il_priv *il, const u8 *addr, bool is_ap, + struct ieee80211_sta *sta, u8 *sta_id_r); +int il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr); +int il_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_sta *sta); + +u8 il_prep_station(struct il_priv *il, const u8 *addr, bool is_ap, + struct ieee80211_sta *sta); + +int il_send_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq, + u8 flags, bool init); + +/** + * il_clear_driver_stations - clear knowledge of all stations from driver + * @il: iwl il struct + * + * This is called during il_down() to make sure that in the case + * we're coming there from a hardware restart mac80211 will be + * able to reconfigure stations -- if we're getting there in the + * normal down flow then the stations will already be cleared. + */ +static inline void +il_clear_driver_stations(struct il_priv *il) +{ + unsigned long flags; + + spin_lock_irqsave(&il->sta_lock, flags); + memset(il->stations, 0, sizeof(il->stations)); + il->num_stations = 0; + il->ucode_key_table = 0; + spin_unlock_irqrestore(&il->sta_lock, flags); +} + +static inline int +il_sta_id(struct ieee80211_sta *sta) +{ + if (WARN_ON(!sta)) + return IL_INVALID_STATION; + + return ((struct il_station_priv_common *)sta->drv_priv)->sta_id; +} + +/** + * il_sta_id_or_broadcast - return sta_id or broadcast sta + * @il: iwl il + * @context: the current context + * @sta: mac80211 station + * + * In certain circumstances mac80211 passes a station pointer + * that may be %NULL, for example during TX or key setup. In + * that case, we need to use the broadcast station, so this + * inline wraps that pattern. + */ +static inline int +il_sta_id_or_broadcast(struct il_priv *il, struct ieee80211_sta *sta) +{ + int sta_id; + + if (!sta) + return il->hw_params.bcast_id; + + sta_id = il_sta_id(sta); + + /* + * mac80211 should not be passing a partially + * initialised station! + */ + WARN_ON(sta_id == IL_INVALID_STATION); + + return sta_id; +} + +/** + * il_queue_inc_wrap - increment queue idx, wrap back to beginning + * @idx -- current idx + * @n_bd -- total number of entries in queue (must be power of 2) + */ +static inline int +il_queue_inc_wrap(int idx, int n_bd) +{ + return ++idx & (n_bd - 1); +} + +/** + * il_queue_dec_wrap - decrement queue idx, wrap back to end + * @idx -- current idx + * @n_bd -- total number of entries in queue (must be power of 2) + */ +static inline int +il_queue_dec_wrap(int idx, int n_bd) +{ + return --idx & (n_bd - 1); +} + +/* TODO: Move fw_desc functions to iwl-pci.ko */ +static inline void +il_free_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc) +{ + if (desc->v_addr) + dma_free_coherent(&pci_dev->dev, desc->len, desc->v_addr, + desc->p_addr); + desc->v_addr = NULL; + desc->len = 0; +} + +static inline int +il_alloc_fw_desc(struct pci_dev *pci_dev, struct fw_desc *desc) +{ + if (!desc->len) { + desc->v_addr = NULL; + return -EINVAL; + } + + desc->v_addr = dma_alloc_coherent(&pci_dev->dev, desc->len, + &desc->p_addr, GFP_KERNEL); + return (desc->v_addr != NULL) ? 0 : -ENOMEM; +} + +/* + * we have 8 bits used like this: + * + * 7 6 5 4 3 2 1 0 + * | | | | | | | | + * | | | | | | +-+-------- AC queue (0-3) + * | | | | | | + * | +-+-+-+-+------------ HW queue ID + * | + * +---------------------- unused + */ +static inline void +il_set_swq_id(struct il_tx_queue *txq, u8 ac, u8 hwq) +{ + BUG_ON(ac > 3); /* only have 2 bits */ + BUG_ON(hwq > 31); /* only use 5 bits */ + + txq->swq_id = (hwq << 2) | ac; +} + +static inline void +_il_wake_queue(struct il_priv *il, u8 ac) +{ + if (atomic_dec_return(&il->queue_stop_count[ac]) <= 0) + ieee80211_wake_queue(il->hw, ac); +} + +static inline void +_il_stop_queue(struct il_priv *il, u8 ac) +{ + if (atomic_inc_return(&il->queue_stop_count[ac]) > 0) + ieee80211_stop_queue(il->hw, ac); +} +static inline void +il_wake_queue(struct il_priv *il, struct il_tx_queue *txq) +{ + u8 queue = txq->swq_id; + u8 ac = queue & 3; + u8 hwq = (queue >> 2) & 0x1f; + + if (test_and_clear_bit(hwq, il->queue_stopped)) + _il_wake_queue(il, ac); +} + +static inline void +il_stop_queue(struct il_priv *il, struct il_tx_queue *txq) +{ + u8 queue = txq->swq_id; + u8 ac = queue & 3; + u8 hwq = (queue >> 2) & 0x1f; + + if (!test_and_set_bit(hwq, il->queue_stopped)) + _il_stop_queue(il, ac); +} + +static inline void +il_wake_queues_by_reason(struct il_priv *il, int reason) +{ + u8 ac; + + if (test_and_clear_bit(reason, &il->stop_reason)) + for (ac = 0; ac < 4; ac++) + _il_wake_queue(il, ac); +} + +static inline void +il_stop_queues_by_reason(struct il_priv *il, int reason) +{ + u8 ac; + + if (!test_and_set_bit(reason, &il->stop_reason)) + for (ac = 0; ac < 4; ac++) + _il_stop_queue(il, ac); +} + +#ifdef ieee80211_stop_queue +#undef ieee80211_stop_queue +#endif + +#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue + +#ifdef ieee80211_wake_queue +#undef ieee80211_wake_queue +#endif + +#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue + +static inline void +il_disable_interrupts(struct il_priv *il) +{ + clear_bit(S_INT_ENABLED, &il->status); + + /* disable interrupts from uCode/NIC to host */ + _il_wr(il, CSR_INT_MASK, 0x00000000); + + /* acknowledge/clear/reset any interrupts still pending + * from uCode or flow handler (Rx/Tx DMA) */ + _il_wr(il, CSR_INT, 0xffffffff); + _il_wr(il, CSR_FH_INT_STATUS, 0xffffffff); +} + +static inline void +il_enable_rfkill_int(struct il_priv *il) +{ + _il_wr(il, CSR_INT_MASK, CSR_INT_BIT_RF_KILL); +} + +static inline void +il_enable_interrupts(struct il_priv *il) +{ + set_bit(S_INT_ENABLED, &il->status); + _il_wr(il, CSR_INT_MASK, il->inta_mask); +} + +/** + * il_beacon_time_mask_low - mask of lower 32 bit of beacon time + * @il -- pointer to il_priv data structure + * @tsf_bits -- number of bits need to shift for masking) + */ +static inline u32 +il_beacon_time_mask_low(struct il_priv *il, u16 tsf_bits) +{ + return (1 << tsf_bits) - 1; +} + +/** + * il_beacon_time_mask_high - mask of higher 32 bit of beacon time + * @il -- pointer to il_priv data structure + * @tsf_bits -- number of bits need to shift for masking) + */ +static inline u32 +il_beacon_time_mask_high(struct il_priv *il, u16 tsf_bits) +{ + return ((1 << (32 - tsf_bits)) - 1) << tsf_bits; +} + +/** + * struct il_rb_status - reseve buffer status host memory mapped FH registers + * + * @closed_rb_num [0:11] - Indicates the idx of the RB which was closed + * @closed_fr_num [0:11] - Indicates the idx of the RX Frame which was closed + * @finished_rb_num [0:11] - Indicates the idx of the current RB + * in which the last frame was written to + * @finished_fr_num [0:11] - Indicates the idx of the RX Frame + * which was transferred + */ +struct il_rb_status { + __le16 closed_rb_num; + __le16 closed_fr_num; + __le16 finished_rb_num; + __le16 finished_fr_nam; + __le32 __unused; /* 3945 only */ +} __packed; + +#define TFD_QUEUE_SIZE_MAX 256 +#define TFD_QUEUE_SIZE_BC_DUP 64 +#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) +#define IL_TX_DMA_MASK DMA_BIT_MASK(36) +#define IL_NUM_OF_TBS 20 + +static inline u8 +il_get_dma_hi_addr(dma_addr_t addr) +{ + return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF; +} + +/** + * struct il_tfd_tb transmit buffer descriptor within transmit frame descriptor + * + * This structure contains dma address and length of transmission address + * + * @lo: low [31:0] portion of the dma address of TX buffer every even is + * unaligned on 16 bit boundary + * @hi_n_len: 0-3 [35:32] portion of dma + * 4-15 length of the tx buffer + */ +struct il_tfd_tb { + __le32 lo; + __le16 hi_n_len; +} __packed; + +/** + * struct il_tfd + * + * Transmit Frame Descriptor (TFD) + * + * @ __reserved1[3] reserved + * @ num_tbs 0-4 number of active tbs + * 5 reserved + * 6-7 padding (not used) + * @ tbs[20] transmit frame buffer descriptors + * @ __pad padding + * + * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. + * Both driver and device share these circular buffers, each of which must be + * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes + * + * Driver must indicate the physical address of the base of each + * circular buffer via the FH49_MEM_CBBC_QUEUE registers. + * + * Each TFD contains pointer/size information for up to 20 data buffers + * in host DRAM. These buffers collectively contain the (one) frame described + * by the TFD. Each buffer must be a single contiguous block of memory within + * itself, but buffers may be scattered in host DRAM. Each buffer has max size + * of (4K - 4). The concatenates all of a TFD's buffers into a single + * Tx frame, up to 8 KBytes in size. + * + * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. + */ +struct il_tfd { + u8 __reserved1[3]; + u8 num_tbs; + struct il_tfd_tb tbs[IL_NUM_OF_TBS]; + __le32 __pad; +} __packed; +/* PCI registers */ +#define PCI_CFG_RETRY_TIMEOUT 0x041 + +struct il_rate_info { + u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */ + u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +struct il3945_rate_info { + u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */ + u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ + u8 table_rs_idx; /* idx in rate scale table cmd */ + u8 prev_table_rs; /* prev in rate table cmd */ +}; + +/* + * These serve as idxes into + * struct il_rate_info il_rates[RATE_COUNT]; + */ +enum { + RATE_1M_IDX = 0, + RATE_2M_IDX, + RATE_5M_IDX, + RATE_11M_IDX, + RATE_6M_IDX, + RATE_9M_IDX, + RATE_12M_IDX, + RATE_18M_IDX, + RATE_24M_IDX, + RATE_36M_IDX, + RATE_48M_IDX, + RATE_54M_IDX, + RATE_60M_IDX, + RATE_COUNT, + RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */ + RATE_COUNT_3945 = RATE_COUNT - 1, + RATE_INVM_IDX = RATE_COUNT, + RATE_INVALID = RATE_COUNT, +}; + +enum { + RATE_6M_IDX_TBL = 0, + RATE_9M_IDX_TBL, + RATE_12M_IDX_TBL, + RATE_18M_IDX_TBL, + RATE_24M_IDX_TBL, + RATE_36M_IDX_TBL, + RATE_48M_IDX_TBL, + RATE_54M_IDX_TBL, + RATE_1M_IDX_TBL, + RATE_2M_IDX_TBL, + RATE_5M_IDX_TBL, + RATE_11M_IDX_TBL, + RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1, +}; + +enum { + IL_FIRST_OFDM_RATE = RATE_6M_IDX, + IL39_LAST_OFDM_RATE = RATE_54M_IDX, + IL_LAST_OFDM_RATE = RATE_60M_IDX, + IL_FIRST_CCK_RATE = RATE_1M_IDX, + IL_LAST_CCK_RATE = RATE_11M_IDX, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define RATE_6M_MASK (1 << RATE_6M_IDX) +#define RATE_9M_MASK (1 << RATE_9M_IDX) +#define RATE_12M_MASK (1 << RATE_12M_IDX) +#define RATE_18M_MASK (1 << RATE_18M_IDX) +#define RATE_24M_MASK (1 << RATE_24M_IDX) +#define RATE_36M_MASK (1 << RATE_36M_IDX) +#define RATE_48M_MASK (1 << RATE_48M_IDX) +#define RATE_54M_MASK (1 << RATE_54M_IDX) +#define RATE_60M_MASK (1 << RATE_60M_IDX) +#define RATE_1M_MASK (1 << RATE_1M_IDX) +#define RATE_2M_MASK (1 << RATE_2M_IDX) +#define RATE_5M_MASK (1 << RATE_5M_IDX) +#define RATE_11M_MASK (1 << RATE_11M_IDX) + +/* uCode API values for legacy bit rates, both OFDM and CCK */ +enum { + RATE_6M_PLCP = 13, + RATE_9M_PLCP = 15, + RATE_12M_PLCP = 5, + RATE_18M_PLCP = 7, + RATE_24M_PLCP = 9, + RATE_36M_PLCP = 11, + RATE_48M_PLCP = 1, + RATE_54M_PLCP = 3, + RATE_60M_PLCP = 3, /*FIXME:RS:should be removed */ + RATE_1M_PLCP = 10, + RATE_2M_PLCP = 20, + RATE_5M_PLCP = 55, + RATE_11M_PLCP = 110, + /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0, */ +}; + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + RATE_SISO_6M_PLCP = 0, + RATE_SISO_12M_PLCP = 1, + RATE_SISO_18M_PLCP = 2, + RATE_SISO_24M_PLCP = 3, + RATE_SISO_36M_PLCP = 4, + RATE_SISO_48M_PLCP = 5, + RATE_SISO_54M_PLCP = 6, + RATE_SISO_60M_PLCP = 7, + RATE_MIMO2_6M_PLCP = 0x8, + RATE_MIMO2_12M_PLCP = 0x9, + RATE_MIMO2_18M_PLCP = 0xa, + RATE_MIMO2_24M_PLCP = 0xb, + RATE_MIMO2_36M_PLCP = 0xc, + RATE_MIMO2_48M_PLCP = 0xd, + RATE_MIMO2_54M_PLCP = 0xe, + RATE_MIMO2_60M_PLCP = 0xf, + RATE_SISO_INVM_PLCP, + RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + RATE_6M_IEEE = 12, + RATE_9M_IEEE = 18, + RATE_12M_IEEE = 24, + RATE_18M_IEEE = 36, + RATE_24M_IEEE = 48, + RATE_36M_IEEE = 72, + RATE_48M_IEEE = 96, + RATE_54M_IEEE = 108, + RATE_60M_IEEE = 120, + RATE_1M_IEEE = 2, + RATE_2M_IEEE = 4, + RATE_5M_IEEE = 11, + RATE_11M_IEEE = 22, +}; + +#define IL_CCK_BASIC_RATES_MASK \ + (RATE_1M_MASK | \ + RATE_2M_MASK) + +#define IL_CCK_RATES_MASK \ + (IL_CCK_BASIC_RATES_MASK | \ + RATE_5M_MASK | \ + RATE_11M_MASK) + +#define IL_OFDM_BASIC_RATES_MASK \ + (RATE_6M_MASK | \ + RATE_12M_MASK | \ + RATE_24M_MASK) + +#define IL_OFDM_RATES_MASK \ + (IL_OFDM_BASIC_RATES_MASK | \ + RATE_9M_MASK | \ + RATE_18M_MASK | \ + RATE_36M_MASK | \ + RATE_48M_MASK | \ + RATE_54M_MASK) + +#define IL_BASIC_RATES_MASK \ + (IL_OFDM_BASIC_RATES_MASK | \ + IL_CCK_BASIC_RATES_MASK) + +#define RATES_MASK ((1 << RATE_COUNT) - 1) +#define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1) + +#define IL_INVALID_VALUE -1 + +#define IL_MIN_RSSI_VAL -100 +#define IL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IL_LEGACY_FAILURE_LIMIT 160 +#define IL_LEGACY_SUCCESS_LIMIT 480 +#define IL_LEGACY_TBL_COUNT 160 + +#define IL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IL_NONE_LEGACY_TBL_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IL_RS_GOOD_RATIO 12800 /* 100% */ +#define RATE_SCALE_SWITCH 10880 /* 85% */ +#define RATE_HIGH_TH 10880 /* 85% */ +#define RATE_INCREASE_TH 6400 /* 50% */ +#define RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IL_LEGACY_SWITCH_ANTENNA1 0 +#define IL_LEGACY_SWITCH_ANTENNA2 1 +#define IL_LEGACY_SWITCH_SISO 2 +#define IL_LEGACY_SWITCH_MIMO2_AB 3 +#define IL_LEGACY_SWITCH_MIMO2_AC 4 +#define IL_LEGACY_SWITCH_MIMO2_BC 5 + +/* possible actions when in siso mode */ +#define IL_SISO_SWITCH_ANTENNA1 0 +#define IL_SISO_SWITCH_ANTENNA2 1 +#define IL_SISO_SWITCH_MIMO2_AB 2 +#define IL_SISO_SWITCH_MIMO2_AC 3 +#define IL_SISO_SWITCH_MIMO2_BC 4 +#define IL_SISO_SWITCH_GI 5 + +/* possible actions when in mimo mode */ +#define IL_MIMO2_SWITCH_ANTENNA1 0 +#define IL_MIMO2_SWITCH_ANTENNA2 1 +#define IL_MIMO2_SWITCH_SISO_A 2 +#define IL_MIMO2_SWITCH_SISO_B 3 +#define IL_MIMO2_SWITCH_SISO_C 4 +#define IL_MIMO2_SWITCH_GI 5 + +#define IL_MAX_SEARCH IL_MIMO2_SWITCH_GI + +#define IL_ACTION_LIMIT 3 /* # possible actions */ + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IL_AGG_TPT_THREHOLD 0 +#define IL_AGG_LOAD_THRESHOLD 10 +#define IL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ +#define TID_MAX_LOAD_COUNT 8 + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +extern const struct il_rate_info il_rates[RATE_COUNT]; + +enum il_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MAX, +}; + +#define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo(tbl) (is_mimo2(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define ANT_NONE 0x0 +#define ANT_A BIT(0) +#define ANT_B BIT(1) +#define ANT_AB (ANT_A | ANT_B) +#define ANT_C BIT(2) +#define ANT_AC (ANT_A | ANT_C) +#define ANT_BC (ANT_B | ANT_C) +#define ANT_ABC (ANT_AB | ANT_C) + +#define IL_MAX_MCS_DISPLAY_SIZE 12 + +struct il_rate_mcs_info { + char mbps[IL_MAX_MCS_DISPLAY_SIZE]; + char mcs[IL_MAX_MCS_DISPLAY_SIZE]; +}; + +/** + * struct il_rate_scale_data -- tx success history for one rate + */ +struct il_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct il_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct il_lq_sta, + * one for "active", and one for "search". + */ +struct il_scale_tbl_info { + enum il_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_ht40; /* 1 = 40 MHz channel width */ + u8 is_dup; /* 1 = duplicated data streams */ + u8 action; /* change modulation; IL_[LEGACY/SISO/MIMO]_SWITCH_* */ + u8 max_search; /* maximun number of tables we can search */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */ +}; + +struct il_traffic_load { + unsigned long time_stamp; /* age of the oldest stats */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct il_lq_sta -- driver's rate scaling ilate structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct il_lq_sta { + u8 active_tbl; /* idx of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u64 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + u8 is_dup; + enum ieee80211_band band; + + /* The following are bitmaps of rates; RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + s8 max_rate_idx; /* Max rate set by user */ + u8 missed_rate_counter; + + struct il_link_quality_cmd lq; + struct il_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct il_traffic_load load[TID_MAX_LOAD_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_scale_table_file; + struct dentry *rs_sta_dbgfs_stats_table_file; + struct dentry *rs_sta_dbgfs_rate_scale_data_file; + struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; + u32 dbg_fixed_rate; +#endif + struct il_priv *drv; + + /* used to be in sta_info */ + int last_txrate_idx; + /* last tx rate_n_flags */ + u32 last_rate_n_flags; + /* packets destined for this STA are aggregated */ + u8 is_agg; +}; + +/* + * il_station_priv: Driver's ilate station information + * + * When mac80211 creates a station it reserves some space (hw->sta_data_size) + * in the structure for use by driver. This structure is places in that + * space. + * + * The common struct MUST be first because it is shared between + * 3945 and 4965! + */ +struct il_station_priv { + struct il_station_priv_common common; + struct il_lq_sta lq_sta; + atomic_t pending_frames; + bool client; + bool asleep; +}; + +static inline u8 +il4965_num_of_ant(u8 m) +{ + return !!(m & ANT_A) + !!(m & ANT_B) + !!(m & ANT_C); +} + +static inline u8 +il4965_first_antenna(u8 mask) +{ + if (mask & ANT_A) + return ANT_A; + if (mask & ANT_B) + return ANT_B; + return ANT_C; +} + +/** + * il3945_rate_scale_init - Initialize the rate scale table based on assoc info + * + * The specific throughput table used is based on the type of network + * the associated with, including A, B, G, and G w/ TGG protection + */ +void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id); + +/* Initialize station's rate scaling information after adding station */ +void il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, + u8 sta_id); +void il3945_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, + u8 sta_id); + +/** + * il_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * il_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +int il4965_rate_control_register(void); +int il3945_rate_control_register(void); + +/** + * il_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +void il4965_rate_control_unregister(void); +void il3945_rate_control_unregister(void); + +int il_power_update_mode(struct il_priv *il, bool force); +void il_power_initialize(struct il_priv *il); + +extern u32 il_debug_level; + +#ifdef CONFIG_IWLEGACY_DEBUG +/* + * il_get_debug_level: Return active debug level for device + * + * Using sysfs it is possible to set per device debug level. This debug + * level will be used if set, otherwise the global debug level which can be + * set via module parameter is used. + */ +static inline u32 +il_get_debug_level(struct il_priv *il) +{ + if (il->debug_level) + return il->debug_level; + else + return il_debug_level; +} +#else +static inline u32 +il_get_debug_level(struct il_priv *il) +{ + return il_debug_level; +} +#endif + +#define il_print_hex_error(il, p, len) \ +do { \ + print_hex_dump(KERN_ERR, "iwl data: ", \ + DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \ +} while (0) + +#ifdef CONFIG_IWLEGACY_DEBUG +#define IL_DBG(level, fmt, args...) \ +do { \ + if (il_get_debug_level(il) & level) \ + dev_err(&il->hw->wiphy->dev, "%c %s " fmt, \ + in_interrupt() ? 'I' : 'U', __func__ , ##args); \ +} while (0) + +#define il_print_hex_dump(il, level, p, len) \ +do { \ + if (il_get_debug_level(il) & level) \ + print_hex_dump(KERN_DEBUG, "iwl data: ", \ + DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \ +} while (0) + +#else +#define IL_DBG(level, fmt, args...) +static inline void +il_print_hex_dump(struct il_priv *il, int level, const void *p, u32 len) +{ +} +#endif /* CONFIG_IWLEGACY_DEBUG */ + +#ifdef CONFIG_IWLEGACY_DEBUGFS +int il_dbgfs_register(struct il_priv *il, const char *name); +void il_dbgfs_unregister(struct il_priv *il); +#else +static inline int +il_dbgfs_register(struct il_priv *il, const char *name) +{ + return 0; +} + +static inline void +il_dbgfs_unregister(struct il_priv *il) +{ +} +#endif /* CONFIG_IWLEGACY_DEBUGFS */ + +/* + * To use the debug system: + * + * If you are defining a new debug classification, simply add it to the #define + * list here in the form of + * + * #define IL_DL_xxxx VALUE + * + * where xxxx should be the name of the classification (for example, WEP). + * + * You then need to either add a IL_xxxx_DEBUG() macro definition for your + * classification, or use IL_DBG(IL_DL_xxxx, ...) whenever you want + * to send output to that classification. + * + * The active debug levels can be accessed via files + * + * /sys/module/iwl4965/parameters/debug + * /sys/module/iwl3945/parameters/debug + * /sys/class/net/wlan0/device/debug_level + * + * when CONFIG_IWLEGACY_DEBUG=y. + */ + +/* 0x0000000F - 0x00000001 */ +#define IL_DL_INFO (1 << 0) +#define IL_DL_MAC80211 (1 << 1) +#define IL_DL_HCMD (1 << 2) +#define IL_DL_STATE (1 << 3) +/* 0x000000F0 - 0x00000010 */ +#define IL_DL_MACDUMP (1 << 4) +#define IL_DL_HCMD_DUMP (1 << 5) +#define IL_DL_EEPROM (1 << 6) +#define IL_DL_RADIO (1 << 7) +/* 0x00000F00 - 0x00000100 */ +#define IL_DL_POWER (1 << 8) +#define IL_DL_TEMP (1 << 9) +#define IL_DL_NOTIF (1 << 10) +#define IL_DL_SCAN (1 << 11) +/* 0x0000F000 - 0x00001000 */ +#define IL_DL_ASSOC (1 << 12) +#define IL_DL_DROP (1 << 13) +#define IL_DL_TXPOWER (1 << 14) +#define IL_DL_AP (1 << 15) +/* 0x000F0000 - 0x00010000 */ +#define IL_DL_FW (1 << 16) +#define IL_DL_RF_KILL (1 << 17) +#define IL_DL_FW_ERRORS (1 << 18) +#define IL_DL_LED (1 << 19) +/* 0x00F00000 - 0x00100000 */ +#define IL_DL_RATE (1 << 20) +#define IL_DL_CALIB (1 << 21) +#define IL_DL_WEP (1 << 22) +#define IL_DL_TX (1 << 23) +/* 0x0F000000 - 0x01000000 */ +#define IL_DL_RX (1 << 24) +#define IL_DL_ISR (1 << 25) +#define IL_DL_HT (1 << 26) +/* 0xF0000000 - 0x10000000 */ +#define IL_DL_11H (1 << 28) +#define IL_DL_STATS (1 << 29) +#define IL_DL_TX_REPLY (1 << 30) +#define IL_DL_QOS (1 << 31) + +#define D_INFO(f, a...) IL_DBG(IL_DL_INFO, f, ## a) +#define D_MAC80211(f, a...) IL_DBG(IL_DL_MAC80211, f, ## a) +#define D_MACDUMP(f, a...) IL_DBG(IL_DL_MACDUMP, f, ## a) +#define D_TEMP(f, a...) IL_DBG(IL_DL_TEMP, f, ## a) +#define D_SCAN(f, a...) IL_DBG(IL_DL_SCAN, f, ## a) +#define D_RX(f, a...) IL_DBG(IL_DL_RX, f, ## a) +#define D_TX(f, a...) IL_DBG(IL_DL_TX, f, ## a) +#define D_ISR(f, a...) IL_DBG(IL_DL_ISR, f, ## a) +#define D_LED(f, a...) IL_DBG(IL_DL_LED, f, ## a) +#define D_WEP(f, a...) IL_DBG(IL_DL_WEP, f, ## a) +#define D_HC(f, a...) IL_DBG(IL_DL_HCMD, f, ## a) +#define D_HC_DUMP(f, a...) IL_DBG(IL_DL_HCMD_DUMP, f, ## a) +#define D_EEPROM(f, a...) IL_DBG(IL_DL_EEPROM, f, ## a) +#define D_CALIB(f, a...) IL_DBG(IL_DL_CALIB, f, ## a) +#define D_FW(f, a...) IL_DBG(IL_DL_FW, f, ## a) +#define D_RF_KILL(f, a...) IL_DBG(IL_DL_RF_KILL, f, ## a) +#define D_DROP(f, a...) IL_DBG(IL_DL_DROP, f, ## a) +#define D_AP(f, a...) IL_DBG(IL_DL_AP, f, ## a) +#define D_TXPOWER(f, a...) IL_DBG(IL_DL_TXPOWER, f, ## a) +#define D_RATE(f, a...) IL_DBG(IL_DL_RATE, f, ## a) +#define D_NOTIF(f, a...) IL_DBG(IL_DL_NOTIF, f, ## a) +#define D_ASSOC(f, a...) IL_DBG(IL_DL_ASSOC, f, ## a) +#define D_HT(f, a...) IL_DBG(IL_DL_HT, f, ## a) +#define D_STATS(f, a...) IL_DBG(IL_DL_STATS, f, ## a) +#define D_TX_REPLY(f, a...) IL_DBG(IL_DL_TX_REPLY, f, ## a) +#define D_QOS(f, a...) IL_DBG(IL_DL_QOS, f, ## a) +#define D_RADIO(f, a...) IL_DBG(IL_DL_RADIO, f, ## a) +#define D_POWER(f, a...) IL_DBG(IL_DL_POWER, f, ## a) +#define D_11H(f, a...) IL_DBG(IL_DL_11H, f, ## a) + +#endif /* __il_core_h__ */ -- cgit v1.2.3-54-g00ecf