From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/net/wireless/iwlwifi/iwl-fw-file.h | 768 ----------------------------- 1 file changed, 768 deletions(-) delete mode 100644 drivers/net/wireless/iwlwifi/iwl-fw-file.h (limited to 'drivers/net/wireless/iwlwifi/iwl-fw-file.h') diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h deleted file mode 100644 index 08303db00..000000000 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ /dev/null @@ -1,768 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_fw_file_h__ -#define __iwl_fw_file_h__ - -#include -#include - -/* v1/v2 uCode file layout */ -struct iwl_ucode_header { - __le32 ver; /* major/minor/API/serial */ - union { - struct { - __le32 inst_size; /* bytes of runtime code */ - __le32 data_size; /* bytes of runtime data */ - __le32 init_size; /* bytes of init code */ - __le32 init_data_size; /* bytes of init data */ - __le32 boot_size; /* bytes of bootstrap code */ - u8 data[0]; /* in same order as sizes */ - } v1; - struct { - __le32 build; /* build number */ - __le32 inst_size; /* bytes of runtime code */ - __le32 data_size; /* bytes of runtime data */ - __le32 init_size; /* bytes of init code */ - __le32 init_data_size; /* bytes of init data */ - __le32 boot_size; /* bytes of bootstrap code */ - u8 data[0]; /* in same order as sizes */ - } v2; - } u; -}; - -/* - * new TLV uCode file layout - * - * The new TLV file format contains TLVs, that each specify - * some piece of data. - */ - -enum iwl_ucode_tlv_type { - IWL_UCODE_TLV_INVALID = 0, /* unused */ - IWL_UCODE_TLV_INST = 1, - IWL_UCODE_TLV_DATA = 2, - IWL_UCODE_TLV_INIT = 3, - IWL_UCODE_TLV_INIT_DATA = 4, - IWL_UCODE_TLV_BOOT = 5, - IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */ - IWL_UCODE_TLV_PAN = 7, - IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8, - IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, - IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10, - IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11, - IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, - IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, - IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, - IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, - IWL_UCODE_TLV_WOWLAN_INST = 16, - IWL_UCODE_TLV_WOWLAN_DATA = 17, - IWL_UCODE_TLV_FLAGS = 18, - IWL_UCODE_TLV_SEC_RT = 19, - IWL_UCODE_TLV_SEC_INIT = 20, - IWL_UCODE_TLV_SEC_WOWLAN = 21, - IWL_UCODE_TLV_DEF_CALIB = 22, - IWL_UCODE_TLV_PHY_SKU = 23, - IWL_UCODE_TLV_SECURE_SEC_RT = 24, - IWL_UCODE_TLV_SECURE_SEC_INIT = 25, - IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26, - IWL_UCODE_TLV_NUM_OF_CPU = 27, - IWL_UCODE_TLV_CSCHEME = 28, - IWL_UCODE_TLV_API_CHANGES_SET = 29, - IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30, - IWL_UCODE_TLV_N_SCAN_CHANNELS = 31, - IWL_UCODE_TLV_PAGING = 32, - IWL_UCODE_TLV_SEC_RT_USNIFFER = 34, - IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35, - IWL_UCODE_TLV_FW_VERSION = 36, - IWL_UCODE_TLV_FW_DBG_DEST = 38, - IWL_UCODE_TLV_FW_DBG_CONF = 39, - IWL_UCODE_TLV_FW_DBG_TRIGGER = 40, - IWL_UCODE_TLV_FW_GSCAN_CAPA = 50, -}; - -struct iwl_ucode_tlv { - __le32 type; /* see above */ - __le32 length; /* not including type/length fields */ - u8 data[0]; -}; - -#define IWL_TLV_UCODE_MAGIC 0x0a4c5749 -#define FW_VER_HUMAN_READABLE_SZ 64 - -struct iwl_tlv_ucode_header { - /* - * The TLV style ucode header is distinguished from - * the v1/v2 style header by first four bytes being - * zero, as such is an invalid combination of - * major/minor/API/serial versions. - */ - __le32 zero; - __le32 magic; - u8 human_readable[FW_VER_HUMAN_READABLE_SZ]; - /* major/minor/API/serial or major in new format */ - __le32 ver; - __le32 build; - __le64 ignore; - /* - * The data contained herein has a TLV layout, - * see above for the TLV header and types. - * Note that each TLV is padded to a length - * that is a multiple of 4 for alignment. - */ - u8 data[0]; -}; - -/* - * ucode TLVs - * - * ability to get extension for: flags & capabilities from ucode binaries files - */ -struct iwl_ucode_api { - __le32 api_index; - __le32 api_flags; -} __packed; - -struct iwl_ucode_capa { - __le32 api_index; - __le32 api_capa; -} __packed; - -/** - * enum iwl_ucode_tlv_flag - ucode API flags - * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously - * was a separate TLV but moved here to save space. - * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID, - * treats good CRC threshold as a boolean - * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). - * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. - * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS - * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD - * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan - * offload profile config command. - * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six - * (rather than two) IPv6 addresses - * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element - * from the probe request template. - * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) - * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) - * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC - * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and - * P2P client interfaces simultaneously if they are in different bindings. - * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and - * P2P client interfaces simultaneously if they are in same bindings. - * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD - * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save - * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. - * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients - * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. - */ -enum iwl_ucode_tlv_flag { - IWL_UCODE_TLV_FLAGS_PAN = BIT(0), - IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), - IWL_UCODE_TLV_FLAGS_MFP = BIT(2), - IWL_UCODE_TLV_FLAGS_P2P = BIT(3), - IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), - IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), - IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), - IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), - IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), - IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), - IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21), - IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22), - IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23), - IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), - IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), - IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), - IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), - IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30), -}; - -typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t; - -/** - * enum iwl_ucode_tlv_api - ucode api - * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex - * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time - * longer than the passive one, which is essential for fragmented scan. - * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. - * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header - * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params - * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format - * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority - * instead of 3. - * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size - * (command version 3) that supports per-chain limits - * - * @NUM_IWL_UCODE_TLV_API: number of bits used - */ -enum iwl_ucode_tlv_api { - IWL_UCODE_TLV_API_BT_COEX_SPLIT = (__force iwl_ucode_tlv_api_t)3, - IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8, - IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9, - IWL_UCODE_TLV_API_WIDE_CMD_HDR = (__force iwl_ucode_tlv_api_t)14, - IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18, - IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20, - IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY = (__force iwl_ucode_tlv_api_t)24, - IWL_UCODE_TLV_API_TX_POWER_CHAIN = (__force iwl_ucode_tlv_api_t)27, - - NUM_IWL_UCODE_TLV_API -#ifdef __CHECKER__ - /* sparse says it cannot increment the previous enum member */ - = 128 -#endif -}; - -typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; - -/** - * enum iwl_ucode_tlv_capa - ucode capabilities - * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 - * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory - * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. - * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer - * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM) - * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality - * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current - * tx power value into TPC Report action frame and Link Measurement Report - * action frame - * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current - * channel in DS parameter set element in probe requests. - * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in - * probe requests. - * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests - * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), - * which also implies support for the scheduler configuration command - * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching - * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command - * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command - * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload - * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics - * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running - * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different - * sources for the MCC. This TLV bit is a future replacement to - * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR - * is supported. - * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC - * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan - * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement - * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts - * - * @NUM_IWL_UCODE_TLV_CAPA: number of bits used - */ -enum iwl_ucode_tlv_capa { - IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0, - IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1, - IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2, - IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3, - IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5, - IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6, - IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8, - IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9, - IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10, - IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11, - IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12, - IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13, - IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18, - IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19, - IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21, - IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22, - IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28, - IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29, - IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30, - IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31, - IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64, - IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65, - - NUM_IWL_UCODE_TLV_CAPA -#ifdef __CHECKER__ - /* sparse says it cannot increment the previous enum member */ - = 128 -#endif -}; - -/* The default calibrate table size if not specified by firmware file */ -#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 -#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 -#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 - -/* The default max probe length if not specified by the firmware file */ -#define IWL_DEFAULT_MAX_PROBE_LENGTH 200 - -/* - * For 16.0 uCode and above, there is no differentiation between sections, - * just an offset to the HW address. - */ -#define IWL_UCODE_SECTION_MAX 16 -#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC -#define PAGING_SEPARATOR_SECTION 0xAAAABBBB - -/* uCode version contains 4 values: Major/Minor/API/Serial */ -#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) -#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) -#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) -#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) - -/* - * Calibration control struct. - * Sent as part of the phy configuration command. - * @flow_trigger: bitmap for which calibrations to perform according to - * flow triggers. - * @event_trigger: bitmap for which calibrations to perform according to - * event triggers. - */ -struct iwl_tlv_calib_ctrl { - __le32 flow_trigger; - __le32 event_trigger; -} __packed; - -enum iwl_fw_phy_cfg { - FW_PHY_CFG_RADIO_TYPE_POS = 0, - FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, - FW_PHY_CFG_RADIO_STEP_POS = 2, - FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, - FW_PHY_CFG_RADIO_DASH_POS = 4, - FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, - FW_PHY_CFG_TX_CHAIN_POS = 16, - FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, - FW_PHY_CFG_RX_CHAIN_POS = 20, - FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, -}; - -#define IWL_UCODE_MAX_CS 1 - -/** - * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW. - * @cipher: a cipher suite selector - * @flags: cipher scheme flags (currently reserved for a future use) - * @hdr_len: a size of MPDU security header - * @pn_len: a size of PN - * @pn_off: an offset of pn from the beginning of the security header - * @key_idx_off: an offset of key index byte in the security header - * @key_idx_mask: a bit mask of key_idx bits - * @key_idx_shift: bit shift needed to get key_idx - * @mic_len: mic length in bytes - * @hw_cipher: a HW cipher index used in host commands - */ -struct iwl_fw_cipher_scheme { - __le32 cipher; - u8 flags; - u8 hdr_len; - u8 pn_len; - u8 pn_off; - u8 key_idx_off; - u8 key_idx_mask; - u8 key_idx_shift; - u8 mic_len; - u8 hw_cipher; -} __packed; - -enum iwl_fw_dbg_reg_operator { - CSR_ASSIGN, - CSR_SETBIT, - CSR_CLEARBIT, - - PRPH_ASSIGN, - PRPH_SETBIT, - PRPH_CLEARBIT, - - INDIRECT_ASSIGN, - INDIRECT_SETBIT, - INDIRECT_CLEARBIT, - - PRPH_BLOCKBIT, -}; - -/** - * struct iwl_fw_dbg_reg_op - an operation on a register - * - * @op: %enum iwl_fw_dbg_reg_operator - * @addr: offset of the register - * @val: value - */ -struct iwl_fw_dbg_reg_op { - u8 op; - u8 reserved[3]; - __le32 addr; - __le32 val; -} __packed; - -/** - * enum iwl_fw_dbg_monitor_mode - available monitor recording modes - * - * @SMEM_MODE: monitor stores the data in SMEM - * @EXTERNAL_MODE: monitor stores the data in allocated DRAM - * @MARBH_MODE: monitor stores the data in MARBH buffer - * @MIPI_MODE: monitor outputs the data through the MIPI interface - */ -enum iwl_fw_dbg_monitor_mode { - SMEM_MODE = 0, - EXTERNAL_MODE = 1, - MARBH_MODE = 2, - MIPI_MODE = 3, -}; - -/** - * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data - * - * @version: version of the TLV - currently 0 - * @monitor_mode: %enum iwl_fw_dbg_monitor_mode - * @size_power: buffer size will be 2^(size_power + 11) - * @base_reg: addr of the base addr register (PRPH) - * @end_reg: addr of the end addr register (PRPH) - * @write_ptr_reg: the addr of the reg of the write pointer - * @wrap_count: the addr of the reg of the wrap_count - * @base_shift: shift right of the base addr reg - * @end_shift: shift right of the end addr reg - * @reg_ops: array of registers operations - * - * This parses IWL_UCODE_TLV_FW_DBG_DEST - */ -struct iwl_fw_dbg_dest_tlv { - u8 version; - u8 monitor_mode; - u8 size_power; - u8 reserved; - __le32 base_reg; - __le32 end_reg; - __le32 write_ptr_reg; - __le32 wrap_count; - u8 base_shift; - u8 end_shift; - struct iwl_fw_dbg_reg_op reg_ops[0]; -} __packed; - -struct iwl_fw_dbg_conf_hcmd { - u8 id; - u8 reserved; - __le16 len; - u8 data[0]; -} __packed; - -/** - * enum iwl_fw_dbg_trigger_mode - triggers functionalities - * - * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism - * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data - * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to - * collect only monitor data - */ -enum iwl_fw_dbg_trigger_mode { - IWL_FW_DBG_TRIGGER_START = BIT(0), - IWL_FW_DBG_TRIGGER_STOP = BIT(1), - IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2), -}; - -/** - * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger - * @IWL_FW_DBG_CONF_VIF_ANY: any vif type - * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode - * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode - * @IWL_FW_DBG_CONF_VIF_AP: AP mode - * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode - * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode - * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device - */ -enum iwl_fw_dbg_trigger_vif_type { - IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED, - IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC, - IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION, - IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP, - IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT, - IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO, - IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE, -}; - -/** - * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger - * @id: %enum iwl_fw_dbg_trigger - * @vif_type: %enum iwl_fw_dbg_trigger_vif_type - * @stop_conf_ids: bitmap of configurations this trigger relates to. - * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding - * to the currently running configuration is set, the data should be - * collected. - * @stop_delay: how many milliseconds to wait before collecting the data - * after the STOP trigger fires. - * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both - * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what - * configuration should be applied when the triggers kicks in. - * @occurrences: number of occurrences. 0 means the trigger will never fire. - */ -struct iwl_fw_dbg_trigger_tlv { - __le32 id; - __le32 vif_type; - __le32 stop_conf_ids; - __le32 stop_delay; - u8 mode; - u8 start_conf_id; - __le16 occurrences; - __le32 reserved[2]; - - u8 data[0]; -} __packed; - -#define FW_DBG_START_FROM_ALIVE 0 -#define FW_DBG_CONF_MAX 32 -#define FW_DBG_INVALID 0xff - -/** - * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons - * @stop_consec_missed_bcon: stop recording if threshold is crossed. - * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed. - * @start_consec_missed_bcon: start recording if threshold is crossed. - * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed. - * @reserved1: reserved - * @reserved2: reserved - */ -struct iwl_fw_dbg_trigger_missed_bcon { - __le32 stop_consec_missed_bcon; - __le32 stop_consec_missed_bcon_since_rx; - __le32 reserved2[2]; - __le32 start_consec_missed_bcon; - __le32 start_consec_missed_bcon_since_rx; - __le32 reserved1[2]; -} __packed; - -/** - * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW. - * cmds: the list of commands to trigger the collection on - */ -struct iwl_fw_dbg_trigger_cmd { - struct cmd { - u8 cmd_id; - u8 group_id; - } __packed cmds[16]; -} __packed; - -/** - * iwl_fw_dbg_trigger_stats - configures trigger for statistics - * @stop_offset: the offset of the value to be monitored - * @stop_threshold: the threshold above which to collect - * @start_offset: the offset of the value to be monitored - * @start_threshold: the threshold above which to start recording - */ -struct iwl_fw_dbg_trigger_stats { - __le32 stop_offset; - __le32 stop_threshold; - __le32 start_offset; - __le32 start_threshold; -} __packed; - -/** - * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI - * @rssi: RSSI value to trigger at - */ -struct iwl_fw_dbg_trigger_low_rssi { - __le32 rssi; -} __packed; - -/** - * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events - * @stop_auth_denied: number of denied authentication to collect - * @stop_auth_timeout: number of authentication timeout to collect - * @stop_rx_deauth: number of Rx deauth before to collect - * @stop_tx_deauth: number of Tx deauth before to collect - * @stop_assoc_denied: number of denied association to collect - * @stop_assoc_timeout: number of association timeout to collect - * @stop_connection_loss: number of connection loss to collect - * @start_auth_denied: number of denied authentication to start recording - * @start_auth_timeout: number of authentication timeout to start recording - * @start_rx_deauth: number of Rx deauth to start recording - * @start_tx_deauth: number of Tx deauth to start recording - * @start_assoc_denied: number of denied association to start recording - * @start_assoc_timeout: number of association timeout to start recording - * @start_connection_loss: number of connection loss to start recording - */ -struct iwl_fw_dbg_trigger_mlme { - u8 stop_auth_denied; - u8 stop_auth_timeout; - u8 stop_rx_deauth; - u8 stop_tx_deauth; - - u8 stop_assoc_denied; - u8 stop_assoc_timeout; - u8 stop_connection_loss; - u8 reserved; - - u8 start_auth_denied; - u8 start_auth_timeout; - u8 start_rx_deauth; - u8 start_tx_deauth; - - u8 start_assoc_denied; - u8 start_assoc_timeout; - u8 start_connection_loss; - u8 reserved2; -} __packed; - -/** - * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer - * @command_queue: timeout for the command queue in ms - * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms - * @softap: timeout for the queues of a softAP in ms - * @p2p_go: timeout for the queues of a P2P GO in ms - * @p2p_client: timeout for the queues of a P2P client in ms - * @p2p_device: timeout for the queues of a P2P device in ms - * @ibss: timeout for the queues of an IBSS in ms - * @tdls: timeout for the queues of a TDLS station in ms - */ -struct iwl_fw_dbg_trigger_txq_timer { - __le32 command_queue; - __le32 bss; - __le32 softap; - __le32 p2p_go; - __le32 p2p_client; - __le32 p2p_device; - __le32 ibss; - __le32 tdls; - __le32 reserved[4]; -} __packed; - -/** - * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger - * time_Events: a list of tuples . The driver will issue a - * trigger each time a time event notification that relates to time event - * id with one of the actions in the bitmap is received and - * BIT(notif->status) is set in status_bitmap. - * - */ -struct iwl_fw_dbg_trigger_time_event { - struct { - __le32 id; - __le32 action_bitmap; - __le32 status_bitmap; - } __packed time_events[16]; -} __packed; - -/** - * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger - * rx_ba_start: tid bitmap to configure on what tid the trigger should occur - * when an Rx BlockAck session is started. - * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur - * when an Rx BlockAck session is stopped. - * tx_ba_start: tid bitmap to configure on what tid the trigger should occur - * when a Tx BlockAck session is started. - * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur - * when a Tx BlockAck session is stopped. - * rx_bar: tid bitmap to configure on what tid the trigger should occur - * when a BAR is received (for a Tx BlockAck session). - * tx_bar: tid bitmap to configure on what tid the trigger should occur - * when a BAR is send (for an Rx BlocAck session). - * frame_timeout: tid bitmap to configure on what tid the trigger should occur - * when a frame times out in the reodering buffer. - */ -struct iwl_fw_dbg_trigger_ba { - __le16 rx_ba_start; - __le16 rx_ba_stop; - __le16 tx_ba_start; - __le16 tx_ba_stop; - __le16 rx_bar; - __le16 tx_bar; - __le16 frame_timeout; -} __packed; - -/** - * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration. - * @id: conf id - * @usniffer: should the uSniffer image be used - * @num_of_hcmds: how many HCMDs to send are present here - * @hcmd: a variable length host command to be sent to apply the configuration. - * If there is more than one HCMD to send, they will appear one after the - * other and be sent in the order that they appear in. - * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to - * %FW_DBG_CONF_MAX configuration per run. - */ -struct iwl_fw_dbg_conf_tlv { - u8 id; - u8 usniffer; - u8 reserved; - u8 num_of_hcmds; - struct iwl_fw_dbg_conf_hcmd hcmd; -} __packed; - -/** - * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW - * @max_scan_cache_size: total space allocated for scan results (in bytes). - * @max_scan_buckets: maximum number of channel buckets. - * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan. - * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI. - * @max_scan_reporting_threshold: max possible report threshold. in percentage. - * @max_hotlist_aps: maximum number of entries for hotlist APs. - * @max_significant_change_aps: maximum number of entries for significant - * change APs. - * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can - * hold. - */ -struct iwl_fw_gscan_capabilities { - __le32 max_scan_cache_size; - __le32 max_scan_buckets; - __le32 max_ap_cache_per_scan; - __le32 max_rssi_sample_size; - __le32 max_scan_reporting_threshold; - __le32 max_hotlist_aps; - __le32 max_significant_change_aps; - __le32 max_bssid_history_entries; -} __packed; - -#endif /* __iwl_fw_file_h__ */ -- cgit v1.2.3-54-g00ecf