From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/net/wireless/iwlwifi/iwl-trans.h | 1125 ------------------------------ 1 file changed, 1125 deletions(-) delete mode 100644 drivers/net/wireless/iwlwifi/iwl-trans.h (limited to 'drivers/net/wireless/iwlwifi/iwl-trans.h') diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h deleted file mode 100644 index 6f7652508..000000000 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ /dev/null @@ -1,1125 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - * - * Contact Information: - * Intel Linux Wireless - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_trans_h__ -#define __iwl_trans_h__ - -#include -#include /* for page_address */ -#include - -#include "iwl-debug.h" -#include "iwl-config.h" -#include "iwl-fw.h" -#include "iwl-op-mode.h" - -/** - * DOC: Transport layer - what is it ? - * - * The transport layer is the layer that deals with the HW directly. It provides - * an abstraction of the underlying HW to the upper layer. The transport layer - * doesn't provide any policy, algorithm or anything of this kind, but only - * mechanisms to make the HW do something. It is not completely stateless but - * close to it. - * We will have an implementation for each different supported bus. - */ - -/** - * DOC: Life cycle of the transport layer - * - * The transport layer has a very precise life cycle. - * - * 1) A helper function is called during the module initialization and - * registers the bus driver's ops with the transport's alloc function. - * 2) Bus's probe calls to the transport layer's allocation functions. - * Of course this function is bus specific. - * 3) This allocation functions will spawn the upper layer which will - * register mac80211. - * - * 4) At some point (i.e. mac80211's start call), the op_mode will call - * the following sequence: - * start_hw - * start_fw - * - * 5) Then when finished (or reset): - * stop_device - * - * 6) Eventually, the free function will be called. - */ - -/** - * DOC: Host command section - * - * A host command is a command issued by the upper layer to the fw. There are - * several versions of fw that have several APIs. The transport layer is - * completely agnostic to these differences. - * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), - */ -#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) -#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) -#define SEQ_TO_INDEX(s) ((s) & 0xff) -#define INDEX_TO_SEQ(i) ((i) & 0xff) -#define SEQ_RX_FRAME cpu_to_le16(0x8000) - -/* - * those functions retrieve specific information from - * the id field in the iwl_host_cmd struct which contains - * the command id, the group id and the version of the command - * and vice versa -*/ -static inline u8 iwl_cmd_opcode(u32 cmdid) -{ - return cmdid & 0xFF; -} - -static inline u8 iwl_cmd_groupid(u32 cmdid) -{ - return ((cmdid & 0xFF00) >> 8); -} - -static inline u8 iwl_cmd_version(u32 cmdid) -{ - return ((cmdid & 0xFF0000) >> 16); -} - -static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version) -{ - return opcode + (groupid << 8) + (version << 16); -} - -/* make u16 wide id out of u8 group and opcode */ -#define WIDE_ID(grp, opcode) ((grp << 8) | opcode) - -/* due to the conversion, this group is special; new groups - * should be defined in the appropriate fw-api header files - */ -#define IWL_ALWAYS_LONG_GROUP 1 - -/** - * struct iwl_cmd_header - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - */ -struct iwl_cmd_header { - u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 group_id; - /* - * The driver sets up the sequence number to values of its choosing. - * uCode does not use this value, but passes it back to the driver - * when sending the response to each driver-originated command, so - * the driver can match the response to the command. Since the values - * don't get used by uCode, the driver may set up an arbitrary format. - * - * There is one exception: uCode sets bit 15 when it originates - * the response/notification, i.e. when the response/notification - * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_RX when it sends a received frame - * to the driver; it is not a direct response to any driver command. - * - * The Linux driver uses the following format: - * - * 0:7 tfd index - position within TX queue - * 8:12 TX queue id - * 13:14 reserved - * 15 unsolicited RX or uCode-originated notification - */ - __le16 sequence; -} __packed; - -/** - * struct iwl_cmd_header_wide - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - * this is the wide version that contains more information about the command - * like length, version and command type - */ -struct iwl_cmd_header_wide { - u8 cmd; - u8 group_id; - __le16 sequence; - __le16 length; - u8 reserved; - u8 version; -} __packed; - -#define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ -#define FH_RSCSR_FRAME_INVALID 0x55550000 -#define FH_RSCSR_FRAME_ALIGN 0x40 - -struct iwl_rx_packet { - /* - * The first 4 bytes of the RX frame header contain both the RX frame - * size and some flags. - * Bit fields: - * 31: flag flush RB request - * 30: flag ignore TC (terminal counter) request - * 29: flag fast IRQ request - * 28-14: Reserved - * 13-00: RX frame size - */ - __le32 len_n_flags; - struct iwl_cmd_header hdr; - u8 data[]; -} __packed; - -static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt) -{ - return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; -} - -static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt) -{ - return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr); -} - -/** - * enum CMD_MODE - how to send the host commands ? - * - * @CMD_ASYNC: Return right away and don't wait for the response - * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of - * the response. The caller needs to call iwl_free_resp when done. - * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the - * command queue, but after other high priority commands. Valid only - * with CMD_ASYNC. - * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle. - * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle. - * @CMD_WAKE_UP_TRANS: The command response should wake up the trans - * (i.e. mark it as non-idle). - * @CMD_TB_BITMAP_POS: Position of the first bit for the TB bitmap. We need to - * check that we leave enough room for the TBs bitmap which needs 20 bits. - */ -enum CMD_MODE { - CMD_ASYNC = BIT(0), - CMD_WANT_SKB = BIT(1), - CMD_SEND_IN_RFKILL = BIT(2), - CMD_HIGH_PRIO = BIT(3), - CMD_SEND_IN_IDLE = BIT(4), - CMD_MAKE_TRANS_IDLE = BIT(5), - CMD_WAKE_UP_TRANS = BIT(6), - - CMD_TB_BITMAP_POS = 11, -}; - -#define DEF_CMD_PAYLOAD_SIZE 320 - -/** - * struct iwl_device_cmd - * - * For allocation of the command and tx queues, this establishes the overall - * size of the largest command we send to uCode, except for commands that - * aren't fully copied and use other TFD space. - */ -struct iwl_device_cmd { - union { - struct { - struct iwl_cmd_header hdr; /* uCode API */ - u8 payload[DEF_CMD_PAYLOAD_SIZE]; - }; - struct { - struct iwl_cmd_header_wide hdr_wide; - u8 payload_wide[DEF_CMD_PAYLOAD_SIZE - - sizeof(struct iwl_cmd_header_wide) + - sizeof(struct iwl_cmd_header)]; - }; - }; -} __packed; - -#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) - -/* - * number of transfer buffers (fragments) per transmit frame descriptor; - * this is just the driver's idea, the hardware supports 20 - */ -#define IWL_MAX_CMD_TBS_PER_TFD 2 - -/** - * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command - * - * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's - * ring. The transport layer doesn't map the command's buffer to DMA, but - * rather copies it to a previously allocated DMA buffer. This flag tells - * the transport layer not to copy the command, but to map the existing - * buffer (that is passed in) instead. This saves the memcpy and allows - * commands that are bigger than the fixed buffer to be submitted. - * Note that a TFD entry after a NOCOPY one cannot be a normal copied one. - * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this - * chunk internally and free it again after the command completes. This - * can (currently) be used only once per command. - * Note that a TFD entry after a DUP one cannot be a normal copied one. - */ -enum iwl_hcmd_dataflag { - IWL_HCMD_DFL_NOCOPY = BIT(0), - IWL_HCMD_DFL_DUP = BIT(1), -}; - -/** - * struct iwl_host_cmd - Host command to the uCode - * - * @data: array of chunks that composes the data of the host command - * @resp_pkt: response packet, if %CMD_WANT_SKB was set - * @_rx_page_order: (internally used to free response packet) - * @_rx_page_addr: (internally used to free response packet) - * @flags: can be CMD_* - * @len: array of the lengths of the chunks in data - * @dataflags: IWL_HCMD_DFL_* - * @id: command id of the host command, for wide commands encoding the - * version and group as well - */ -struct iwl_host_cmd { - const void *data[IWL_MAX_CMD_TBS_PER_TFD]; - struct iwl_rx_packet *resp_pkt; - unsigned long _rx_page_addr; - u32 _rx_page_order; - - u32 flags; - u32 id; - u16 len[IWL_MAX_CMD_TBS_PER_TFD]; - u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD]; -}; - -static inline void iwl_free_resp(struct iwl_host_cmd *cmd) -{ - free_pages(cmd->_rx_page_addr, cmd->_rx_page_order); -} - -struct iwl_rx_cmd_buffer { - struct page *_page; - int _offset; - bool _page_stolen; - u32 _rx_page_order; - unsigned int truesize; -}; - -static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) -{ - return (void *)((unsigned long)page_address(r->_page) + r->_offset); -} - -static inline int rxb_offset(struct iwl_rx_cmd_buffer *r) -{ - return r->_offset; -} - -static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) -{ - r->_page_stolen = true; - get_page(r->_page); - return r->_page; -} - -static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r) -{ - __free_pages(r->_page, r->_rx_page_order); -} - -#define MAX_NO_RECLAIM_CMDS 6 - -#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -/* - * Maximum number of HW queues the transport layer - * currently supports - */ -#define IWL_MAX_HW_QUEUES 32 -#define IWL_MAX_TID_COUNT 8 -#define IWL_FRAME_LIMIT 64 -#define IWL_MAX_RX_HW_QUEUES 16 - -/** - * enum iwl_wowlan_status - WoWLAN image/device status - * @IWL_D3_STATUS_ALIVE: firmware is still running after resume - * @IWL_D3_STATUS_RESET: device was reset while suspended - */ -enum iwl_d3_status { - IWL_D3_STATUS_ALIVE, - IWL_D3_STATUS_RESET, -}; - -/** - * enum iwl_trans_status: transport status flags - * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed - * @STATUS_DEVICE_ENABLED: APM is enabled - * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up) - * @STATUS_INT_ENABLED: interrupts are enabled - * @STATUS_RFKILL: the HW RFkill switch is in KILL position - * @STATUS_FW_ERROR: the fw is in error state - * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands - * are sent - * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent - * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation - */ -enum iwl_trans_status { - STATUS_SYNC_HCMD_ACTIVE, - STATUS_DEVICE_ENABLED, - STATUS_TPOWER_PMI, - STATUS_INT_ENABLED, - STATUS_RFKILL, - STATUS_FW_ERROR, - STATUS_TRANS_GOING_IDLE, - STATUS_TRANS_IDLE, - STATUS_TRANS_DEAD, -}; - -/** - * struct iwl_trans_config - transport configuration - * - * @op_mode: pointer to the upper layer. - * @cmd_queue: the index of the command queue. - * Must be set before start_fw. - * @cmd_fifo: the fifo for host commands - * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue. - * @no_reclaim_cmds: Some devices erroneously don't set the - * SEQ_RX_FRAME bit on some notifications, this is the - * list of such notifications to filter. Max length is - * %MAX_NO_RECLAIM_CMDS. - * @n_no_reclaim_cmds: # of commands in list - * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs, - * if unset 4k will be the RX buffer size - * @bc_table_dword: set to true if the BC table expects the byte count to be - * in DWORD (as opposed to bytes) - * @scd_set_active: should the transport configure the SCD for HCMD queue - * @wide_cmd_header: firmware supports wide host command header - * @command_names: array of command names, must be 256 entries - * (one for each command); for debugging only - * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until - * we get the ALIVE from the uCode - */ -struct iwl_trans_config { - struct iwl_op_mode *op_mode; - - u8 cmd_queue; - u8 cmd_fifo; - unsigned int cmd_q_wdg_timeout; - const u8 *no_reclaim_cmds; - unsigned int n_no_reclaim_cmds; - - bool rx_buf_size_8k; - bool bc_table_dword; - bool scd_set_active; - bool wide_cmd_header; - const char *const *command_names; - - u32 sdio_adma_addr; -}; - -struct iwl_trans_dump_data { - u32 len; - u8 data[]; -}; - -struct iwl_trans; - -struct iwl_trans_txq_scd_cfg { - u8 fifo; - s8 sta_id; - u8 tid; - bool aggregate; - int frame_limit; -}; - -/** - * struct iwl_trans_ops - transport specific operations - * - * All the handlers MUST be implemented - * - * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken - * out of a low power state. From that point on, the HW can send - * interrupts. May sleep. - * @op_mode_leave: Turn off the HW RF kill indication if on - * May sleep - * @start_fw: allocates and inits all the resources for the transport - * layer. Also kick a fw image. - * May sleep - * @fw_alive: called when the fw sends alive notification. If the fw provides - * the SCD base address in SRAM, then provide it here, or 0 otherwise. - * May sleep - * @stop_device: stops the whole device (embedded CPU put to reset) and stops - * the HW. If low_power is true, the NIC will be put in low power state. - * From that point on, the HW will be stopped but will still issue an - * interrupt if the HW RF kill switch is triggered. - * This callback must do the right thing and not crash even if %start_hw() - * was called but not &start_fw(). May sleep. - * @d3_suspend: put the device into the correct mode for WoWLAN during - * suspend. This is optional, if not implemented WoWLAN will not be - * supported. This callback may sleep. - * @d3_resume: resume the device after WoWLAN, enabling the opmode to - * talk to the WoWLAN image to get its status. This is optional, if not - * implemented WoWLAN will not be supported. This callback may sleep. - * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted. - * If RFkill is asserted in the middle of a SYNC host command, it must - * return -ERFKILL straight away. - * May sleep only if CMD_ASYNC is not set - * @tx: send an skb - * Must be atomic - * @reclaim: free packet until ssn. Returns a list of freed packets. - * Must be atomic - * @txq_enable: setup a queue. To setup an AC queue, use the - * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before - * this one. The op_mode must not configure the HCMD queue. The scheduler - * configuration may be %NULL, in which case the hardware will not be - * configured. May sleep. - * @txq_disable: de-configure a Tx queue to send AMPDUs - * Must be atomic - * @wait_tx_queue_empty: wait until tx queues are empty. May sleep. - * @freeze_txq_timer: prevents the timer of the queue from firing until the - * queue is set to awake. Must be atomic. - * @dbgfs_register: add the dbgfs files under this directory. Files will be - * automatically deleted. - * @write8: write a u8 to a register at offset ofs from the BAR - * @write32: write a u32 to a register at offset ofs from the BAR - * @read32: read a u32 register at offset ofs from the BAR - * @read_prph: read a DWORD from a periphery register - * @write_prph: write a DWORD to a periphery register - * @read_mem: read device's SRAM in DWORD - * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory - * will be zeroed. - * @configure: configure parameters required by the transport layer from - * the op_mode. May be called several times before start_fw, can't be - * called after that. - * @set_pmi: set the power pmi state - * @grab_nic_access: wake the NIC to be able to access non-HBUS regs. - * Sleeping is not allowed between grab_nic_access and - * release_nic_access. - * @release_nic_access: let the NIC go to sleep. The "flags" parameter - * must be the same one that was sent before to the grab_nic_access. - * @set_bits_mask - set SRAM register according to value and mask. - * @ref: grab a reference to the transport/FW layers, disallowing - * certain low power states - * @unref: release a reference previously taken with @ref. Note that - * initially the reference count is 1, making an initial @unref - * necessary to allow low power states. - * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last - * TX'ed commands and similar. The buffer will be vfree'd by the caller. - * Note that the transport must fill in the proper file headers. - */ -struct iwl_trans_ops { - - int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); - void (*op_mode_leave)(struct iwl_trans *iwl_trans); - int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, - bool run_in_rfkill); - int (*update_sf)(struct iwl_trans *trans, - struct iwl_sf_region *st_fwrd_space); - void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); - void (*stop_device)(struct iwl_trans *trans, bool low_power); - - void (*d3_suspend)(struct iwl_trans *trans, bool test); - int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, - bool test); - - int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); - - int (*tx)(struct iwl_trans *trans, struct sk_buff *skb, - struct iwl_device_cmd *dev_cmd, int queue); - void (*reclaim)(struct iwl_trans *trans, int queue, int ssn, - struct sk_buff_head *skbs); - - void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn, - const struct iwl_trans_txq_scd_cfg *cfg, - unsigned int queue_wdg_timeout); - void (*txq_disable)(struct iwl_trans *trans, int queue, - bool configure_scd); - - int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir); - int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm); - void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs, - bool freeze); - - void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); - void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); - u32 (*read32)(struct iwl_trans *trans, u32 ofs); - u32 (*read_prph)(struct iwl_trans *trans, u32 ofs); - void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val); - int (*read_mem)(struct iwl_trans *trans, u32 addr, - void *buf, int dwords); - int (*write_mem)(struct iwl_trans *trans, u32 addr, - const void *buf, int dwords); - void (*configure)(struct iwl_trans *trans, - const struct iwl_trans_config *trans_cfg); - void (*set_pmi)(struct iwl_trans *trans, bool state); - bool (*grab_nic_access)(struct iwl_trans *trans, bool silent, - unsigned long *flags); - void (*release_nic_access)(struct iwl_trans *trans, - unsigned long *flags); - void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask, - u32 value); - void (*ref)(struct iwl_trans *trans); - void (*unref)(struct iwl_trans *trans); - int (*suspend)(struct iwl_trans *trans); - void (*resume)(struct iwl_trans *trans); - - struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans, - struct iwl_fw_dbg_trigger_tlv - *trigger); -}; - -/** - * enum iwl_trans_state - state of the transport layer - * - * @IWL_TRANS_NO_FW: no fw has sent an alive response - * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response - */ -enum iwl_trans_state { - IWL_TRANS_NO_FW = 0, - IWL_TRANS_FW_ALIVE = 1, -}; - -/** - * enum iwl_d0i3_mode - d0i3 mode - * - * @IWL_D0I3_MODE_OFF - d0i3 is disabled - * @IWL_D0I3_MODE_ON_IDLE - enter d0i3 when device is idle - * (e.g. no active references) - * @IWL_D0I3_MODE_ON_SUSPEND - enter d0i3 only on suspend - * (in case of 'any' trigger) - */ -enum iwl_d0i3_mode { - IWL_D0I3_MODE_OFF = 0, - IWL_D0I3_MODE_ON_IDLE, - IWL_D0I3_MODE_ON_SUSPEND, -}; - -/** - * struct iwl_trans - transport common data - * - * @ops - pointer to iwl_trans_ops - * @op_mode - pointer to the op_mode - * @cfg - pointer to the configuration - * @status: a bit-mask of transport status flags - * @dev - pointer to struct device * that represents the device - * @max_skb_frags: maximum number of fragments an SKB can have when transmitted. - * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported. - * @hw_id: a u32 with the ID of the device / sub-device. - * Set during transport allocation. - * @hw_id_str: a string with info about HW ID. Set during transport allocation. - * @pm_support: set to true in start_hw if link pm is supported - * @ltr_enabled: set to true if the LTR is enabled - * @num_rx_queues: number of RX queues allocated by the transport; - * the transport must set this before calling iwl_drv_start() - * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only. - * The user should use iwl_trans_{alloc,free}_tx_cmd. - * @dev_cmd_headroom: room needed for the transport's private use before the - * device_cmd for Tx - for internal use only - * The user should use iwl_trans_{alloc,free}_tx_cmd. - * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before - * starting the firmware, used for tracing - * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the - * start of the 802.11 header in the @rx_mpdu_cmd - * @dflt_pwr_limit: default power limit fetched from the platform (ACPI) - * @dbg_dest_tlv: points to the destination TLV for debug - * @dbg_conf_tlv: array of pointers to configuration TLVs for debug - * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug - * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv - * @paging_req_addr: The location were the FW will upload / download the pages - * from. The address is set by the opmode - * @paging_db: Pointer to the opmode paging data base, the pointer is set by - * the opmode. - * @paging_download_buf: Buffer used for copying all of the pages before - * downloading them to the FW. The buffer is allocated in the opmode - */ -struct iwl_trans { - const struct iwl_trans_ops *ops; - struct iwl_op_mode *op_mode; - const struct iwl_cfg *cfg; - enum iwl_trans_state state; - unsigned long status; - - struct device *dev; - u32 max_skb_frags; - u32 hw_rev; - u32 hw_id; - char hw_id_str[52]; - - u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size; - - bool pm_support; - bool ltr_enabled; - - u8 num_rx_queues; - - /* The following fields are internal only */ - struct kmem_cache *dev_cmd_pool; - size_t dev_cmd_headroom; - char dev_cmd_pool_name[50]; - - struct dentry *dbgfs_dir; - -#ifdef CONFIG_LOCKDEP - struct lockdep_map sync_cmd_lockdep_map; -#endif - - u64 dflt_pwr_limit; - - const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv; - const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX]; - struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv; - u8 dbg_dest_reg_num; - - /* - * Paging parameters - All of the parameters should be set by the - * opmode when paging is enabled - */ - u32 paging_req_addr; - struct iwl_fw_paging *paging_db; - void *paging_download_buf; - - enum iwl_d0i3_mode d0i3_mode; - - bool wowlan_d0i3; - - /* pointer to trans specific struct */ - /*Ensure that this pointer will always be aligned to sizeof pointer */ - char trans_specific[0] __aligned(sizeof(void *)); -}; - -static inline void iwl_trans_configure(struct iwl_trans *trans, - const struct iwl_trans_config *trans_cfg) -{ - trans->op_mode = trans_cfg->op_mode; - - trans->ops->configure(trans, trans_cfg); -} - -static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) -{ - might_sleep(); - - return trans->ops->start_hw(trans, low_power); -} - -static inline int iwl_trans_start_hw(struct iwl_trans *trans) -{ - return trans->ops->start_hw(trans, true); -} - -static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) -{ - might_sleep(); - - if (trans->ops->op_mode_leave) - trans->ops->op_mode_leave(trans); - - trans->op_mode = NULL; - - trans->state = IWL_TRANS_NO_FW; -} - -static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr) -{ - might_sleep(); - - trans->state = IWL_TRANS_FW_ALIVE; - - trans->ops->fw_alive(trans, scd_addr); -} - -static inline int iwl_trans_start_fw(struct iwl_trans *trans, - const struct fw_img *fw, - bool run_in_rfkill) -{ - might_sleep(); - - WARN_ON_ONCE(!trans->rx_mpdu_cmd); - - clear_bit(STATUS_FW_ERROR, &trans->status); - return trans->ops->start_fw(trans, fw, run_in_rfkill); -} - -static inline int iwl_trans_update_sf(struct iwl_trans *trans, - struct iwl_sf_region *st_fwrd_space) -{ - might_sleep(); - - if (trans->ops->update_sf) - return trans->ops->update_sf(trans, st_fwrd_space); - - return 0; -} - -static inline void _iwl_trans_stop_device(struct iwl_trans *trans, - bool low_power) -{ - might_sleep(); - - trans->ops->stop_device(trans, low_power); - - trans->state = IWL_TRANS_NO_FW; -} - -static inline void iwl_trans_stop_device(struct iwl_trans *trans) -{ - _iwl_trans_stop_device(trans, true); -} - -static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test) -{ - might_sleep(); - if (trans->ops->d3_suspend) - trans->ops->d3_suspend(trans, test); -} - -static inline int iwl_trans_d3_resume(struct iwl_trans *trans, - enum iwl_d3_status *status, - bool test) -{ - might_sleep(); - if (!trans->ops->d3_resume) - return 0; - - return trans->ops->d3_resume(trans, status, test); -} - -static inline void iwl_trans_ref(struct iwl_trans *trans) -{ - if (trans->ops->ref) - trans->ops->ref(trans); -} - -static inline void iwl_trans_unref(struct iwl_trans *trans) -{ - if (trans->ops->unref) - trans->ops->unref(trans); -} - -static inline int iwl_trans_suspend(struct iwl_trans *trans) -{ - if (!trans->ops->suspend) - return 0; - - return trans->ops->suspend(trans); -} - -static inline void iwl_trans_resume(struct iwl_trans *trans) -{ - if (trans->ops->resume) - trans->ops->resume(trans); -} - -static inline struct iwl_trans_dump_data * -iwl_trans_dump_data(struct iwl_trans *trans, - struct iwl_fw_dbg_trigger_tlv *trigger) -{ - if (!trans->ops->dump_data) - return NULL; - return trans->ops->dump_data(trans, trigger); -} - -static inline int iwl_trans_send_cmd(struct iwl_trans *trans, - struct iwl_host_cmd *cmd) -{ - int ret; - - if (unlikely(!(cmd->flags & CMD_SEND_IN_RFKILL) && - test_bit(STATUS_RFKILL, &trans->status))) - return -ERFKILL; - - if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status))) - return -EIO; - - if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) { - IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - return -EIO; - } - - if (!(cmd->flags & CMD_ASYNC)) - lock_map_acquire_read(&trans->sync_cmd_lockdep_map); - - ret = trans->ops->send_cmd(trans, cmd); - - if (!(cmd->flags & CMD_ASYNC)) - lock_map_release(&trans->sync_cmd_lockdep_map); - - return ret; -} - -static inline struct iwl_device_cmd * -iwl_trans_alloc_tx_cmd(struct iwl_trans *trans) -{ - u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC); - - if (unlikely(dev_cmd_ptr == NULL)) - return NULL; - - return (struct iwl_device_cmd *) - (dev_cmd_ptr + trans->dev_cmd_headroom); -} - -static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans, - struct iwl_device_cmd *dev_cmd) -{ - u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom; - - kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr); -} - -static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, - struct iwl_device_cmd *dev_cmd, int queue) -{ - if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status))) - return -EIO; - - if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) - IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - - return trans->ops->tx(trans, skb, dev_cmd, queue); -} - -static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue, - int ssn, struct sk_buff_head *skbs) -{ - if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) - IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - - trans->ops->reclaim(trans, queue, ssn, skbs); -} - -static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue, - bool configure_scd) -{ - trans->ops->txq_disable(trans, queue, configure_scd); -} - -static inline void -iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn, - const struct iwl_trans_txq_scd_cfg *cfg, - unsigned int queue_wdg_timeout) -{ - might_sleep(); - - if (unlikely((trans->state != IWL_TRANS_FW_ALIVE))) - IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - - trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout); -} - -static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue, - int fifo, int sta_id, int tid, - int frame_limit, u16 ssn, - unsigned int queue_wdg_timeout) -{ - struct iwl_trans_txq_scd_cfg cfg = { - .fifo = fifo, - .sta_id = sta_id, - .tid = tid, - .frame_limit = frame_limit, - .aggregate = sta_id >= 0, - }; - - iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout); -} - -static inline -void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo, - unsigned int queue_wdg_timeout) -{ - struct iwl_trans_txq_scd_cfg cfg = { - .fifo = fifo, - .sta_id = -1, - .tid = IWL_MAX_TID_COUNT, - .frame_limit = IWL_FRAME_LIMIT, - .aggregate = false, - }; - - iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout); -} - -static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans, - unsigned long txqs, - bool freeze) -{ - if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) - IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - - if (trans->ops->freeze_txq_timer) - trans->ops->freeze_txq_timer(trans, txqs, freeze); -} - -static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans, - u32 txqs) -{ - if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) - IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - - return trans->ops->wait_tx_queue_empty(trans, txqs); -} - -static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans, - struct dentry *dir) -{ - return trans->ops->dbgfs_register(trans, dir); -} - -static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) -{ - trans->ops->write8(trans, ofs, val); -} - -static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val) -{ - trans->ops->write32(trans, ofs, val); -} - -static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs) -{ - return trans->ops->read32(trans, ofs); -} - -static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs) -{ - return trans->ops->read_prph(trans, ofs); -} - -static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs, - u32 val) -{ - return trans->ops->write_prph(trans, ofs, val); -} - -static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr, - void *buf, int dwords) -{ - return trans->ops->read_mem(trans, addr, buf, dwords); -} - -#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \ - do { \ - if (__builtin_constant_p(bufsize)) \ - BUILD_BUG_ON((bufsize) % sizeof(u32)); \ - iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\ - } while (0) - -static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr) -{ - u32 value; - - if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1))) - return 0xa5a5a5a5; - - return value; -} - -static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr, - const void *buf, int dwords) -{ - return trans->ops->write_mem(trans, addr, buf, dwords); -} - -static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr, - u32 val) -{ - return iwl_trans_write_mem(trans, addr, &val, 1); -} - -static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) -{ - if (trans->ops->set_pmi) - trans->ops->set_pmi(trans, state); -} - -static inline void -iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value) -{ - trans->ops->set_bits_mask(trans, reg, mask, value); -} - -#define iwl_trans_grab_nic_access(trans, silent, flags) \ - __cond_lock(nic_access, \ - likely((trans)->ops->grab_nic_access(trans, silent, flags))) - -static inline void __releases(nic_access) -iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags) -{ - trans->ops->release_nic_access(trans, flags); - __release(nic_access); -} - -static inline void iwl_trans_fw_error(struct iwl_trans *trans) -{ - if (WARN_ON_ONCE(!trans->op_mode)) - return; - - /* prevent double restarts due to the same erroneous FW */ - if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status)) - iwl_op_mode_nic_error(trans->op_mode); -} - -/***************************************************** - * transport helper functions - *****************************************************/ -struct iwl_trans *iwl_trans_alloc(unsigned int priv_size, - struct device *dev, - const struct iwl_cfg *cfg, - const struct iwl_trans_ops *ops, - size_t dev_cmd_headroom); -void iwl_trans_free(struct iwl_trans *trans); - -/***************************************************** -* driver (transport) register/unregister functions -******************************************************/ -int __must_check iwl_pci_register_driver(void); -void iwl_pci_unregister_driver(void); - -#endif /* __iwl_trans_h__ */ -- cgit v1.2.3-54-g00ecf