From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Fri, 25 Mar 2016 03:53:42 -0300 Subject: Linux-libre 4.5-gnu --- drivers/net/wireless/rt2x00/rt2500pci.c | 2148 ------------------------------- 1 file changed, 2148 deletions(-) delete mode 100644 drivers/net/wireless/rt2x00/rt2500pci.c (limited to 'drivers/net/wireless/rt2x00/rt2500pci.c') diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c deleted file mode 100644 index 1a6740b4d..000000000 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ /dev/null @@ -1,2148 +0,0 @@ -/* - Copyright (C) 2004 - 2009 Ivo van Doorn - - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, see . - */ - -/* - Module: rt2500pci - Abstract: rt2500pci device specific routines. - Supported chipsets: RT2560. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "rt2x00.h" -#include "rt2x00mmio.h" -#include "rt2x00pci.h" -#include "rt2500pci.h" - -/* - * Register access. - * All access to the CSR registers will go through the methods - * rt2x00mmio_register_read and rt2x00mmio_register_write. - * BBP and RF register require indirect register access, - * and use the CSR registers BBPCSR and RFCSR to achieve this. - * These indirect registers work with busy bits, - * and we will try maximal REGISTER_BUSY_COUNT times to access - * the register while taking a REGISTER_BUSY_DELAY us delay - * between each attampt. When the busy bit is still set at that time, - * the access attempt is considered to have failed, - * and we will print an error. - */ -#define WAIT_FOR_BBP(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg)) -#define WAIT_FOR_RF(__dev, __reg) \ - rt2x00mmio_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg)) - -static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u8 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBPCSR_VALUE, value); - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 1); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the BBP becomes available, afterwards we - * can safely write the read request into the register. - * After the data has been written, we wait until hardware - * returns the correct value, if at any time the register - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ - if (WAIT_FOR_BBP(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, BBPCSR_REGNUM, word); - rt2x00_set_field32(®, BBPCSR_BUSY, 1); - rt2x00_set_field32(®, BBPCSR_WRITE_CONTROL, 0); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg); - - WAIT_FOR_BBP(rt2x00dev, ®); - } - - *value = rt2x00_get_field32(reg, BBPCSR_VALUE); - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) -{ - u32 reg; - - mutex_lock(&rt2x00dev->csr_mutex); - - /* - * Wait until the RF becomes available, afterwards we - * can safely write the new data into the register. - */ - if (WAIT_FOR_RF(rt2x00dev, ®)) { - reg = 0; - rt2x00_set_field32(®, RFCSR_VALUE, value); - rt2x00_set_field32(®, RFCSR_NUMBER_OF_BITS, 20); - rt2x00_set_field32(®, RFCSR_IF_SELECT, 0); - rt2x00_set_field32(®, RFCSR_BUSY, 1); - - rt2x00mmio_register_write(rt2x00dev, RFCSR, reg); - rt2x00_rf_write(rt2x00dev, word, value); - } - - mutex_unlock(&rt2x00dev->csr_mutex); -} - -static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR21, ®); - - eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN); - eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT); - eeprom->reg_data_clock = - !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK); - eeprom->reg_chip_select = - !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT); -} - -static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom) -{ - struct rt2x00_dev *rt2x00dev = eeprom->data; - u32 reg = 0; - - rt2x00_set_field32(®, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out); - rt2x00_set_field32(®, CSR21_EEPROM_DATA_CLOCK, - !!eeprom->reg_data_clock); - rt2x00_set_field32(®, CSR21_EEPROM_CHIP_SELECT, - !!eeprom->reg_chip_select); - - rt2x00mmio_register_write(rt2x00dev, CSR21, reg); -} - -#ifdef CONFIG_RT2X00_LIB_DEBUGFS -static const struct rt2x00debug rt2500pci_rt2x00debug = { - .owner = THIS_MODULE, - .csr = { - .read = rt2x00mmio_register_read, - .write = rt2x00mmio_register_write, - .flags = RT2X00DEBUGFS_OFFSET, - .word_base = CSR_REG_BASE, - .word_size = sizeof(u32), - .word_count = CSR_REG_SIZE / sizeof(u32), - }, - .eeprom = { - .read = rt2x00_eeprom_read, - .write = rt2x00_eeprom_write, - .word_base = EEPROM_BASE, - .word_size = sizeof(u16), - .word_count = EEPROM_SIZE / sizeof(u16), - }, - .bbp = { - .read = rt2500pci_bbp_read, - .write = rt2500pci_bbp_write, - .word_base = BBP_BASE, - .word_size = sizeof(u8), - .word_count = BBP_SIZE / sizeof(u8), - }, - .rf = { - .read = rt2x00_rf_read, - .write = rt2500pci_rf_write, - .word_base = RF_BASE, - .word_size = sizeof(u32), - .word_count = RF_SIZE / sizeof(u32), - }, -}; -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ - -static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); - return rt2x00_get_field32(reg, GPIOCSR_VAL0); -} - -#ifdef CONFIG_RT2X00_LIB_LEDS -static void rt2500pci_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - unsigned int enabled = brightness != LED_OFF; - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); - - if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC) - rt2x00_set_field32(®, LEDCSR_LINK, enabled); - else if (led->type == LED_TYPE_ACTIVITY) - rt2x00_set_field32(®, LEDCSR_ACTIVITY, enabled); - - rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); -} - -static int rt2500pci_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct rt2x00_led *led = - container_of(led_cdev, struct rt2x00_led, led_dev); - u32 reg; - - rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, ®); - rt2x00_set_field32(®, LEDCSR_ON_PERIOD, *delay_on); - rt2x00_set_field32(®, LEDCSR_OFF_PERIOD, *delay_off); - rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg); - - return 0; -} - -static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev, - struct rt2x00_led *led, - enum led_type type) -{ - led->rt2x00dev = rt2x00dev; - led->type = type; - led->led_dev.brightness_set = rt2500pci_brightness_set; - led->led_dev.blink_set = rt2500pci_blink_set; - led->flags = LED_INITIALIZED; -} -#endif /* CONFIG_RT2X00_LIB_LEDS */ - -/* - * Configuration handlers. - */ -static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev, - const unsigned int filter_flags) -{ - u32 reg; - - /* - * Start configuration steps. - * Note that the version error will always be dropped - * and broadcast frames will always be accepted since - * there is no filter for it at this time. - */ - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DROP_CRC, - !(filter_flags & FIF_FCSFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_PHYSICAL, - !(filter_flags & FIF_PLCPFAIL)); - rt2x00_set_field32(®, RXCSR0_DROP_CONTROL, - !(filter_flags & FIF_CONTROL)); - rt2x00_set_field32(®, RXCSR0_DROP_NOT_TO_ME, 1); - rt2x00_set_field32(®, RXCSR0_DROP_TODS, - !rt2x00dev->intf_ap_count); - rt2x00_set_field32(®, RXCSR0_DROP_VERSION_ERROR, 1); - rt2x00_set_field32(®, RXCSR0_DROP_MCAST, - !(filter_flags & FIF_ALLMULTI)); - rt2x00_set_field32(®, RXCSR0_DROP_BCAST, 0); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); -} - -static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, - struct rt2x00_intf *intf, - struct rt2x00intf_conf *conf, - const unsigned int flags) -{ - struct data_queue *queue = rt2x00dev->bcn; - unsigned int bcn_preload; - u32 reg; - - if (flags & CONFIG_UPDATE_TYPE) { - /* - * Enable beacon config - */ - bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20); - rt2x00mmio_register_read(rt2x00dev, BCNCSR1, ®); - rt2x00_set_field32(®, BCNCSR1_PRELOAD, bcn_preload); - rt2x00_set_field32(®, BCNCSR1_BEACON_CWMIN, queue->cw_min); - rt2x00mmio_register_write(rt2x00dev, BCNCSR1, reg); - - /* - * Enable synchronisation. - */ - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_SYNC, conf->sync); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - } - - if (flags & CONFIG_UPDATE_MAC) - rt2x00mmio_register_multiwrite(rt2x00dev, CSR3, - conf->mac, sizeof(conf->mac)); - - if (flags & CONFIG_UPDATE_BSSID) - rt2x00mmio_register_multiwrite(rt2x00dev, CSR5, - conf->bssid, sizeof(conf->bssid)); -} - -static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_erp *erp, - u32 changed) -{ - int preamble_mask; - u32 reg; - - /* - * When short preamble is enabled, we should set bit 0x08 - */ - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - preamble_mask = erp->short_preamble << 3; - - rt2x00mmio_register_read(rt2x00dev, TXCSR1, ®); - rt2x00_set_field32(®, TXCSR1_ACK_TIMEOUT, 0x162); - rt2x00_set_field32(®, TXCSR1_ACK_CONSUME_TIME, 0xa2); - rt2x00_set_field32(®, TXCSR1_TSF_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(®, TXCSR1_AUTORESPONDER, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); - rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 10)); - rt2x00mmio_register_write(rt2x00dev, ARCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR3, ®); - rt2x00_set_field32(®, ARCSR3_SIGNAL, 0x01 | preamble_mask); - rt2x00_set_field32(®, ARCSR3_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 20)); - rt2x00mmio_register_write(rt2x00dev, ARCSR3, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR4, ®); - rt2x00_set_field32(®, ARCSR4_SIGNAL, 0x02 | preamble_mask); - rt2x00_set_field32(®, ARCSR4_SERVICE, 0x04); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 55)); - rt2x00mmio_register_write(rt2x00dev, ARCSR4, reg); - - rt2x00mmio_register_read(rt2x00dev, ARCSR5, ®); - rt2x00_set_field32(®, ARCSR5_SIGNAL, 0x03 | preamble_mask); - rt2x00_set_field32(®, ARCSR5_SERVICE, 0x84); - rt2x00_set_field32(®, ARCSR2_LENGTH, - GET_DURATION(ACK_SIZE, 110)); - rt2x00mmio_register_write(rt2x00dev, ARCSR5, reg); - } - - if (changed & BSS_CHANGED_BASIC_RATES) - rt2x00mmio_register_write(rt2x00dev, ARCSR1, erp->basic_rates); - - if (changed & BSS_CHANGED_ERP_SLOT) { - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_SLOT_TIME, erp->slot_time); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR18, ®); - rt2x00_set_field32(®, CSR18_SIFS, erp->sifs); - rt2x00_set_field32(®, CSR18_PIFS, erp->pifs); - rt2x00mmio_register_write(rt2x00dev, CSR18, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR19, ®); - rt2x00_set_field32(®, CSR19_DIFS, erp->difs); - rt2x00_set_field32(®, CSR19_EIFS, erp->eifs); - rt2x00mmio_register_write(rt2x00dev, CSR19, reg); - } - - if (changed & BSS_CHANGED_BEACON_INT) { - rt2x00mmio_register_read(rt2x00dev, CSR12, ®); - rt2x00_set_field32(®, CSR12_BEACON_INTERVAL, - erp->beacon_int * 16); - rt2x00_set_field32(®, CSR12_CFP_MAX_DURATION, - erp->beacon_int * 16); - rt2x00mmio_register_write(rt2x00dev, CSR12, reg); - } - -} - -static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev, - struct antenna_setup *ant) -{ - u32 reg; - u8 r14; - u8 r2; - - /* - * We should never come here because rt2x00lib is supposed - * to catch this and send us the correct antenna explicitely. - */ - BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY || - ant->tx == ANTENNA_SW_DIVERSITY); - - rt2x00mmio_register_read(rt2x00dev, BBPCSR1, ®); - rt2500pci_bbp_read(rt2x00dev, 14, &r14); - rt2500pci_bbp_read(rt2x00dev, 2, &r2); - - /* - * Configure the TX antenna. - */ - switch (ant->tx) { - case ANTENNA_A: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); - rt2x00_set_field32(®, BBPCSR1_CCK, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); - rt2x00_set_field32(®, BBPCSR1_CCK, 2); - rt2x00_set_field32(®, BBPCSR1_OFDM, 2); - break; - } - - /* - * Configure the RX antenna. - */ - switch (ant->rx) { - case ANTENNA_A: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); - break; - case ANTENNA_B: - default: - rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); - break; - } - - /* - * RT2525E and RT5222 need to flip TX I/Q - */ - if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) { - rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 1); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 1); - - /* - * RT2525E does not need RX I/Q Flip. - */ - if (rt2x00_rf(rt2x00dev, RF2525E)) - rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); - } else { - rt2x00_set_field32(®, BBPCSR1_CCK_FLIP, 0); - rt2x00_set_field32(®, BBPCSR1_OFDM_FLIP, 0); - } - - rt2x00mmio_register_write(rt2x00dev, BBPCSR1, reg); - rt2500pci_bbp_write(rt2x00dev, 14, r14); - rt2500pci_bbp_write(rt2x00dev, 2, r2); -} - -static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev, - struct rf_channel *rf, const int txpower) -{ - u8 r70; - - /* - * Set TXpower. - */ - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - - /* - * Switch on tuning bits. - * For RT2523 devices we do not need to update the R1 register. - */ - if (!rt2x00_rf(rt2x00dev, RF2523)) - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1); - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1); - - /* - * For RT2525 we should first set the channel to half band higher. - */ - if (rt2x00_rf(rt2x00dev, RF2525)) { - static const u32 vals[] = { - 0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a, - 0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a, - 0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a, - 0x00080d2e, 0x00080d3a - }; - - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500pci_rf_write(rt2x00dev, 4, rf->rf4); - } - - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - rt2500pci_rf_write(rt2x00dev, 2, rf->rf2); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - if (rf->rf4) - rt2500pci_rf_write(rt2x00dev, 4, rf->rf4); - - /* - * Channel 14 requires the Japan filter bit to be set. - */ - r70 = 0x46; - rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14); - rt2500pci_bbp_write(rt2x00dev, 70, r70); - - msleep(1); - - /* - * Switch off tuning bits. - * For RT2523 devices we do not need to update the R1 register. - */ - if (!rt2x00_rf(rt2x00dev, RF2523)) { - rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0); - rt2500pci_rf_write(rt2x00dev, 1, rf->rf1); - } - - rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0); - rt2500pci_rf_write(rt2x00dev, 3, rf->rf3); - - /* - * Clear false CRC during channel switch. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, &rf->rf1); -} - -static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev, - const int txpower) -{ - u32 rf3; - - rt2x00_rf_read(rt2x00dev, 3, &rf3); - rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); - rt2500pci_rf_write(rt2x00dev, 3, rf3); -} - -static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_LONG_RETRY, - libconf->conf->long_frame_max_tx_count); - rt2x00_set_field32(®, CSR11_SHORT_RETRY, - libconf->conf->short_frame_max_tx_count); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); -} - -static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf) -{ - enum dev_state state = - (libconf->conf->flags & IEEE80211_CONF_PS) ? - STATE_SLEEP : STATE_AWAKE; - u32 reg; - - if (state == STATE_SLEEP) { - rt2x00mmio_register_read(rt2x00dev, CSR20, ®); - rt2x00_set_field32(®, CSR20_DELAY_AFTER_TBCN, - (rt2x00dev->beacon_int - 20) * 16); - rt2x00_set_field32(®, CSR20_TBCN_BEFORE_WAKEUP, - libconf->conf->listen_interval - 1); - - /* We must first disable autowake before it can be enabled */ - rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - - rt2x00_set_field32(®, CSR20_AUTOWAKE, 1); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - } else { - rt2x00mmio_register_read(rt2x00dev, CSR20, ®); - rt2x00_set_field32(®, CSR20_AUTOWAKE, 0); - rt2x00mmio_register_write(rt2x00dev, CSR20, reg); - } - - rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); -} - -static void rt2500pci_config(struct rt2x00_dev *rt2x00dev, - struct rt2x00lib_conf *libconf, - const unsigned int flags) -{ - if (flags & IEEE80211_CONF_CHANGE_CHANNEL) - rt2500pci_config_channel(rt2x00dev, &libconf->rf, - libconf->conf->power_level); - if ((flags & IEEE80211_CONF_CHANGE_POWER) && - !(flags & IEEE80211_CONF_CHANGE_CHANNEL)) - rt2500pci_config_txpower(rt2x00dev, - libconf->conf->power_level); - if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) - rt2500pci_config_retry_limit(rt2x00dev, libconf); - if (flags & IEEE80211_CONF_CHANGE_PS) - rt2500pci_config_ps(rt2x00dev, libconf); -} - -/* - * Link tuning - */ -static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - u32 reg; - - /* - * Update FCS error count from register. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, ®); - qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR); - - /* - * Update False CCA count from register. - */ - rt2x00mmio_register_read(rt2x00dev, CNT3, ®); - qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA); -} - -static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, u8 vgc_level) -{ - if (qual->vgc_level_reg != vgc_level) { - rt2500pci_bbp_write(rt2x00dev, 17, vgc_level); - qual->vgc_level = vgc_level; - qual->vgc_level_reg = vgc_level; - } -} - -static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual) -{ - rt2500pci_set_vgc(rt2x00dev, qual, 0x48); -} - -static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev, - struct link_qual *qual, const u32 count) -{ - /* - * To prevent collisions with MAC ASIC on chipsets - * up to version C the link tuning should halt after 20 - * seconds while being associated. - */ - if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D && - rt2x00dev->intf_associated && count > 20) - return; - - /* - * Chipset versions C and lower should directly continue - * to the dynamic CCA tuning. Chipset version D and higher - * should go straight to dynamic CCA tuning when they - * are not associated. - */ - if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D || - !rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (qual->rssi < -80 && count > 20) { - if (qual->vgc_level_reg >= 0x41) - rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level); - return; - } - - /* - * Special big-R17 for short distance - */ - if (qual->rssi >= -58) { - rt2500pci_set_vgc(rt2x00dev, qual, 0x50); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (qual->rssi >= -74) { - rt2500pci_set_vgc(rt2x00dev, qual, 0x41); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - if (qual->vgc_level_reg >= 0x41) { - rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level); - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40) - rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg); - else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32) - rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg); -} - -/* - * Queue handlers. - */ -static void rt2500pci_start_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 0); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); - rt2x00_set_field32(®, CSR14_TBCN, 1); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - break; - default: - break; - } -} - -static void rt2500pci_kick_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_AC_VI: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_TX, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_ATIM: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - default: - break; - } -} - -static void rt2500pci_stop_queue(struct data_queue *queue) -{ - struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; - u32 reg; - - switch (queue->qid) { - case QID_AC_VO: - case QID_AC_VI: - case QID_ATIM: - rt2x00mmio_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_ABORT, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg); - break; - case QID_RX: - rt2x00mmio_register_read(rt2x00dev, RXCSR0, ®); - rt2x00_set_field32(®, RXCSR0_DISABLE_RX, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg); - break; - case QID_BEACON: - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - /* - * Wait for possibly running tbtt tasklets. - */ - tasklet_kill(&rt2x00dev->tbtt_tasklet); - break; - default: - break; - } -} - -/* - * Initialization functions. - */ -static bool rt2500pci_get_entry_state(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return rt2x00_get_field32(word, RXD_W0_OWNER_NIC); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - - return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - rt2x00_get_field32(word, TXD_W0_VALID)); - } -} - -static void rt2500pci_clear_entry(struct queue_entry *entry) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - u32 word; - - if (entry->queue->qid == QID_RX) { - rt2x00_desc_read(entry_priv->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(entry_priv->desc, 1, word); - - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(entry_priv->desc, 0, word); - } else { - rt2x00_desc_read(entry_priv->desc, 0, &word); - rt2x00_set_field32(&word, TXD_W0_VALID, 0); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(entry_priv->desc, 0, word); - } -} - -static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) -{ - struct queue_entry_priv_mmio *entry_priv; - u32 reg; - - /* - * Initialize registers. - */ - rt2x00mmio_register_read(rt2x00dev, TXCSR2, ®); - rt2x00_set_field32(®, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size); - rt2x00_set_field32(®, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit); - rt2x00_set_field32(®, TXCSR2_NUM_ATIM, rt2x00dev->atim->limit); - rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); - rt2x00mmio_register_write(rt2x00dev, TXCSR2, reg); - - entry_priv = rt2x00dev->tx[1].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR3, ®); - rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR3, reg); - - entry_priv = rt2x00dev->tx[0].entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR5, ®); - rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR5, reg); - - entry_priv = rt2x00dev->atim->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR4, ®); - rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR4, reg); - - entry_priv = rt2x00dev->bcn->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, TXCSR6, ®); - rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, TXCSR6, reg); - - rt2x00mmio_register_read(rt2x00dev, RXCSR1, ®); - rt2x00_set_field32(®, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size); - rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); - rt2x00mmio_register_write(rt2x00dev, RXCSR1, reg); - - entry_priv = rt2x00dev->rx->entries[0].priv_data; - rt2x00mmio_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, - entry_priv->desc_dma); - rt2x00mmio_register_write(rt2x00dev, RXCSR2, reg); - - return 0; -} - -static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - - rt2x00mmio_register_write(rt2x00dev, PSCSR0, 0x00020002); - rt2x00mmio_register_write(rt2x00dev, PSCSR1, 0x00000002); - rt2x00mmio_register_write(rt2x00dev, PSCSR2, 0x00020002); - rt2x00mmio_register_write(rt2x00dev, PSCSR3, 0x00000002); - - rt2x00mmio_register_read(rt2x00dev, TIMECSR, ®); - rt2x00_set_field32(®, TIMECSR_US_COUNT, 33); - rt2x00_set_field32(®, TIMECSR_US_64_COUNT, 63); - rt2x00_set_field32(®, TIMECSR_BEACON_EXPECT, 0); - rt2x00mmio_register_write(rt2x00dev, TIMECSR, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR9, ®); - rt2x00_set_field32(®, CSR9_MAX_FRAME_UNIT, - rt2x00dev->rx->data_size / 128); - rt2x00mmio_register_write(rt2x00dev, CSR9, reg); - - /* - * Always use CWmin and CWmax set in descriptor. - */ - rt2x00mmio_register_read(rt2x00dev, CSR11, ®); - rt2x00_set_field32(®, CSR11_CW_SELECT, 0); - rt2x00mmio_register_write(rt2x00dev, CSR11, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TSF_SYNC, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_TCFP, 0); - rt2x00_set_field32(®, CSR14_TATIMW, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00_set_field32(®, CSR14_CFP_COUNT_PRELOAD, 0); - rt2x00_set_field32(®, CSR14_TBCM_PRELOAD, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - rt2x00mmio_register_write(rt2x00dev, CNT3, 0); - - rt2x00mmio_register_read(rt2x00dev, TXCSR8, ®); - rt2x00_set_field32(®, TXCSR8_BBP_ID0, 10); - rt2x00_set_field32(®, TXCSR8_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID1, 11); - rt2x00_set_field32(®, TXCSR8_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID2, 13); - rt2x00_set_field32(®, TXCSR8_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, TXCSR8_BBP_ID3, 12); - rt2x00_set_field32(®, TXCSR8_BBP_ID3_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, TXCSR8, reg); - - rt2x00mmio_register_read(rt2x00dev, ARTCSR0, ®); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_1MBS, 112); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_2MBS, 56); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_5_5MBS, 20); - rt2x00_set_field32(®, ARTCSR0_ACK_CTS_11MBS, 10); - rt2x00mmio_register_write(rt2x00dev, ARTCSR0, reg); - - rt2x00mmio_register_read(rt2x00dev, ARTCSR1, ®); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_6MBS, 45); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_9MBS, 37); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_12MBS, 33); - rt2x00_set_field32(®, ARTCSR1_ACK_CTS_18MBS, 29); - rt2x00mmio_register_write(rt2x00dev, ARTCSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, ARTCSR2, ®); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_24MBS, 29); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_36MBS, 25); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_48MBS, 25); - rt2x00_set_field32(®, ARTCSR2_ACK_CTS_54MBS, 25); - rt2x00mmio_register_write(rt2x00dev, ARTCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, RXCSR3, ®); - rt2x00_set_field32(®, RXCSR3_BBP_ID0, 47); /* CCK Signal */ - rt2x00_set_field32(®, RXCSR3_BBP_ID0_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID1, 51); /* Rssi */ - rt2x00_set_field32(®, RXCSR3_BBP_ID1_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID2, 42); /* OFDM Rate */ - rt2x00_set_field32(®, RXCSR3_BBP_ID2_VALID, 1); - rt2x00_set_field32(®, RXCSR3_BBP_ID3, 51); /* RSSI */ - rt2x00_set_field32(®, RXCSR3_BBP_ID3_VALID, 1); - rt2x00mmio_register_write(rt2x00dev, RXCSR3, reg); - - rt2x00mmio_register_read(rt2x00dev, PCICSR, ®); - rt2x00_set_field32(®, PCICSR_BIG_ENDIAN, 0); - rt2x00_set_field32(®, PCICSR_RX_TRESHOLD, 0); - rt2x00_set_field32(®, PCICSR_TX_TRESHOLD, 3); - rt2x00_set_field32(®, PCICSR_BURST_LENTH, 1); - rt2x00_set_field32(®, PCICSR_ENABLE_CLK, 1); - rt2x00_set_field32(®, PCICSR_READ_MULTIPLE, 1); - rt2x00_set_field32(®, PCICSR_WRITE_INVALID, 1); - rt2x00mmio_register_write(rt2x00dev, PCICSR, reg); - - rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100); - - rt2x00mmio_register_write(rt2x00dev, GPIOCSR, 0x0000ff00); - rt2x00mmio_register_write(rt2x00dev, TESTCSR, 0x000000f0); - - if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) - return -EBUSY; - - rt2x00mmio_register_write(rt2x00dev, MACCSR0, 0x00213223); - rt2x00mmio_register_write(rt2x00dev, MACCSR1, 0x00235518); - - rt2x00mmio_register_read(rt2x00dev, MACCSR2, ®); - rt2x00_set_field32(®, MACCSR2_DELAY, 64); - rt2x00mmio_register_write(rt2x00dev, MACCSR2, reg); - - rt2x00mmio_register_read(rt2x00dev, RALINKCSR, ®); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA0, 17); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID0, 26); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID0, 1); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_DATA1, 0); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_ID1, 26); - rt2x00_set_field32(®, RALINKCSR_AR_BBP_VALID1, 1); - rt2x00mmio_register_write(rt2x00dev, RALINKCSR, reg); - - rt2x00mmio_register_write(rt2x00dev, BBPCSR1, 0x82188200); - - rt2x00mmio_register_write(rt2x00dev, TXACKCSR0, 0x00000020); - - rt2x00mmio_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 1); - rt2x00_set_field32(®, CSR1_BBP_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 0); - rt2x00mmio_register_write(rt2x00dev, CSR1, reg); - - rt2x00mmio_register_read(rt2x00dev, CSR1, ®); - rt2x00_set_field32(®, CSR1_SOFT_RESET, 0); - rt2x00_set_field32(®, CSR1_HOST_READY, 1); - rt2x00mmio_register_write(rt2x00dev, CSR1, reg); - - /* - * We must clear the FCS and FIFO error count. - * These registers are cleared on read, - * so we may pass a useless variable to store the value. - */ - rt2x00mmio_register_read(rt2x00dev, CNT0, ®); - rt2x00mmio_register_read(rt2x00dev, CNT4, ®); - - return 0; -} - -static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u8 value; - - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2500pci_bbp_read(rt2x00dev, 0, &value); - if ((value != 0xff) && (value != 0x00)) - return 0; - udelay(REGISTER_BUSY_DELAY); - } - - rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n"); - return -EACCES; -} - -static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) -{ - unsigned int i; - u16 eeprom; - u8 reg_id; - u8 value; - - if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev))) - return -EACCES; - - rt2500pci_bbp_write(rt2x00dev, 3, 0x02); - rt2500pci_bbp_write(rt2x00dev, 4, 0x19); - rt2500pci_bbp_write(rt2x00dev, 14, 0x1c); - rt2500pci_bbp_write(rt2x00dev, 15, 0x30); - rt2500pci_bbp_write(rt2x00dev, 16, 0xac); - rt2500pci_bbp_write(rt2x00dev, 18, 0x18); - rt2500pci_bbp_write(rt2x00dev, 19, 0xff); - rt2500pci_bbp_write(rt2x00dev, 20, 0x1e); - rt2500pci_bbp_write(rt2x00dev, 21, 0x08); - rt2500pci_bbp_write(rt2x00dev, 22, 0x08); - rt2500pci_bbp_write(rt2x00dev, 23, 0x08); - rt2500pci_bbp_write(rt2x00dev, 24, 0x70); - rt2500pci_bbp_write(rt2x00dev, 25, 0x40); - rt2500pci_bbp_write(rt2x00dev, 26, 0x08); - rt2500pci_bbp_write(rt2x00dev, 27, 0x23); - rt2500pci_bbp_write(rt2x00dev, 30, 0x10); - rt2500pci_bbp_write(rt2x00dev, 31, 0x2b); - rt2500pci_bbp_write(rt2x00dev, 32, 0xb9); - rt2500pci_bbp_write(rt2x00dev, 34, 0x12); - rt2500pci_bbp_write(rt2x00dev, 35, 0x50); - rt2500pci_bbp_write(rt2x00dev, 39, 0xc4); - rt2500pci_bbp_write(rt2x00dev, 40, 0x02); - rt2500pci_bbp_write(rt2x00dev, 41, 0x60); - rt2500pci_bbp_write(rt2x00dev, 53, 0x10); - rt2500pci_bbp_write(rt2x00dev, 54, 0x18); - rt2500pci_bbp_write(rt2x00dev, 56, 0x08); - rt2500pci_bbp_write(rt2x00dev, 57, 0x10); - rt2500pci_bbp_write(rt2x00dev, 58, 0x08); - rt2500pci_bbp_write(rt2x00dev, 61, 0x6d); - rt2500pci_bbp_write(rt2x00dev, 62, 0x10); - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); - - if (eeprom != 0xffff && eeprom != 0x0000) { - reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); - value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); - rt2500pci_bbp_write(rt2x00dev, reg_id, value); - } - } - - return 0; -} - -/* - * Device state switch handlers. - */ -static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int mask = (state == STATE_RADIO_IRQ_OFF); - u32 reg; - unsigned long flags; - - /* - * When interrupts are being enabled, the interrupt registers - * should clear the register to assure a clean state. - */ - if (state == STATE_RADIO_IRQ_ON) { - rt2x00mmio_register_read(rt2x00dev, CSR7, ®); - rt2x00mmio_register_write(rt2x00dev, CSR7, reg); - } - - /* - * Only toggle the interrupts bits we are going to use. - * Non-checked interrupt bits are disabled by default. - */ - spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TBCN_EXPIRE, mask); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, mask); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, mask); - rt2x00_set_field32(®, CSR8_RXDONE, mask); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags); - - if (state == STATE_RADIO_IRQ_OFF) { - /* - * Ensure that all tasklets are finished. - */ - tasklet_kill(&rt2x00dev->txstatus_tasklet); - tasklet_kill(&rt2x00dev->rxdone_tasklet); - tasklet_kill(&rt2x00dev->tbtt_tasklet); - } -} - -static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Initialize all registers. - */ - if (unlikely(rt2500pci_init_queues(rt2x00dev) || - rt2500pci_init_registers(rt2x00dev) || - rt2500pci_init_bbp(rt2x00dev))) - return -EIO; - - return 0; -} - -static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) -{ - /* - * Disable power - */ - rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0); -} - -static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - u32 reg, reg2; - unsigned int i; - char put_to_sleep; - char bbp_state; - char rf_state; - - put_to_sleep = (state != STATE_AWAKE); - - rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®); - rt2x00_set_field32(®, PWRCSR1_SET_STATE, 1); - rt2x00_set_field32(®, PWRCSR1_BBP_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_RF_DESIRE_STATE, state); - rt2x00_set_field32(®, PWRCSR1_PUT_TO_SLEEP, put_to_sleep); - rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); - - /* - * Device is not guaranteed to be in the requested state yet. - * We must wait until the register indicates that the - * device has entered the correct state. - */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2x00mmio_register_read(rt2x00dev, PWRCSR1, ®2); - bbp_state = rt2x00_get_field32(reg2, PWRCSR1_BBP_CURR_STATE); - rf_state = rt2x00_get_field32(reg2, PWRCSR1_RF_CURR_STATE); - if (bbp_state == state && rf_state == state) - return 0; - rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg); - msleep(10); - } - - return -EBUSY; -} - -static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, - enum dev_state state) -{ - int retval = 0; - - switch (state) { - case STATE_RADIO_ON: - retval = rt2500pci_enable_radio(rt2x00dev); - break; - case STATE_RADIO_OFF: - rt2500pci_disable_radio(rt2x00dev); - break; - case STATE_RADIO_IRQ_ON: - case STATE_RADIO_IRQ_OFF: - rt2500pci_toggle_irq(rt2x00dev, state); - break; - case STATE_DEEP_SLEEP: - case STATE_SLEEP: - case STATE_STANDBY: - case STATE_AWAKE: - retval = rt2500pci_set_state(rt2x00dev, state); - break; - default: - retval = -ENOTSUPP; - break; - } - - if (unlikely(retval)) - rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", - state, retval); - - return retval; -} - -/* - * TX descriptor initialization - */ -static void rt2500pci_write_tx_desc(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - __le32 *txd = entry_priv->desc; - u32 word; - - /* - * Start writing the descriptor words. - */ - rt2x00_desc_read(txd, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); - rt2x00_desc_write(txd, 1, word); - - rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W2_AIFS, entry->queue->aifs); - rt2x00_set_field32(&word, TXD_W2_CWMIN, entry->queue->cw_min); - rt2x00_set_field32(&word, TXD_W2_CWMAX, entry->queue->cw_max); - rt2x00_desc_write(txd, 2, word); - - rt2x00_desc_read(txd, 3, &word); - rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->u.plcp.signal); - rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->u.plcp.service); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, - txdesc->u.plcp.length_low); - rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, - txdesc->u.plcp.length_high); - rt2x00_desc_write(txd, 3, word); - - rt2x00_desc_read(txd, 10, &word); - rt2x00_set_field32(&word, TXD_W10_RTS, - test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); - rt2x00_desc_write(txd, 10, word); - - /* - * Writing TXD word 0 must the last to prevent a race condition with - * the device, whereby the device may take hold of the TXD before we - * finished updating it. - */ - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1); - rt2x00_set_field32(&word, TXD_W0_VALID, 1); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - (txdesc->rate_mode == RATE_MODE_OFDM)); - rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs); - rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); - rt2x00_desc_write(txd, 0, word); - - /* - * Register descriptor details in skb frame descriptor. - */ - skbdesc->desc = txd; - skbdesc->desc_len = TXD_DESC_SIZE; -} - -/* - * TX data initialization - */ -static void rt2500pci_write_beacon(struct queue_entry *entry, - struct txentry_desc *txdesc) -{ - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - u32 reg; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00mmio_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); - - if (rt2x00queue_map_txskb(entry)) { - rt2x00_err(rt2x00dev, "Fail to map beacon, aborting\n"); - goto out; - } - - /* - * Write the TX descriptor for the beacon. - */ - rt2500pci_write_tx_desc(entry, txdesc); - - /* - * Dump beacon to userspace through debugfs. - */ - rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -out: - /* - * Enable beaconing again. - */ - rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); - rt2x00mmio_register_write(rt2x00dev, CSR14, reg); -} - -/* - * RX control handlers - */ -static void rt2500pci_fill_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) -{ - struct queue_entry_priv_mmio *entry_priv = entry->priv_data; - u32 word0; - u32 word2; - - rt2x00_desc_read(entry_priv->desc, 0, &word0); - rt2x00_desc_read(entry_priv->desc, 2, &word2); - - if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; - if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) - rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; - - /* - * Obtain the status about this packet. - * When frame was received with an OFDM bitrate, - * the signal is the PLCP value. If it was received with - * a CCK bitrate the signal is the rate in 100kbit/s. - */ - rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL); - rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) - - entry->queue->rt2x00dev->rssi_offset; - rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - - if (rt2x00_get_field32(word0, RXD_W0_OFDM)) - rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; - else - rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE; - if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) - rxdesc->dev_flags |= RXDONE_MY_BSS; -} - -/* - * Interrupt functions. - */ -static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue_idx) -{ - struct data_queue *queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx); - struct queue_entry_priv_mmio *entry_priv; - struct queue_entry *entry; - struct txdone_entry_desc txdesc; - u32 word; - - while (!rt2x00queue_empty(queue)) { - entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - entry_priv = entry->priv_data; - rt2x00_desc_read(entry_priv->desc, 0, &word); - - if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || - !rt2x00_get_field32(word, TXD_W0_VALID)) - break; - - /* - * Obtain the status about this packet. - */ - txdesc.flags = 0; - switch (rt2x00_get_field32(word, TXD_W0_RESULT)) { - case 0: /* Success */ - case 1: /* Success with retry */ - __set_bit(TXDONE_SUCCESS, &txdesc.flags); - break; - case 2: /* Failure, excessive retries */ - __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); - /* Don't break, this is a failed frame! */ - default: /* Failure */ - __set_bit(TXDONE_FAILURE, &txdesc.flags); - } - txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - - rt2x00lib_txdone(entry, &txdesc); - } -} - -static inline void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, - struct rt2x00_field32 irq_field) -{ - u32 reg; - - /* - * Enable a single interrupt. The interrupt mask register - * access needs locking. - */ - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, irq_field, 0); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); -} - -static void rt2500pci_txstatus_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - u32 reg; - - /* - * Handle all tx queues. - */ - rt2500pci_txdone(rt2x00dev, QID_ATIM); - rt2500pci_txdone(rt2x00dev, QID_AC_VO); - rt2500pci_txdone(rt2x00dev, QID_AC_VI); - - /* - * Enable all TXDONE interrupts again. - */ - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) { - spin_lock_irq(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - rt2x00_set_field32(®, CSR8_TXDONE_TXRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_ATIMRING, 0); - rt2x00_set_field32(®, CSR8_TXDONE_PRIORING, 0); - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock_irq(&rt2x00dev->irqmask_lock); - } -} - -static void rt2500pci_tbtt_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00lib_beacondone(rt2x00dev); - if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2500pci_enable_interrupt(rt2x00dev, CSR8_TBCN_EXPIRE); -} - -static void rt2500pci_rxdone_tasklet(unsigned long data) -{ - struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - if (rt2x00mmio_rxdone(rt2x00dev)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); -} - -static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) -{ - struct rt2x00_dev *rt2x00dev = dev_instance; - u32 reg, mask; - - /* - * Get the interrupt sources & saved to local variable. - * Write register value back to clear pending interrupts. - */ - rt2x00mmio_register_read(rt2x00dev, CSR7, ®); - rt2x00mmio_register_write(rt2x00dev, CSR7, reg); - - if (!reg) - return IRQ_NONE; - - if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) - return IRQ_HANDLED; - - mask = reg; - - /* - * Schedule tasklets for interrupt handling. - */ - if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE)) - tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet); - - if (rt2x00_get_field32(reg, CSR7_RXDONE)) - tasklet_schedule(&rt2x00dev->rxdone_tasklet); - - if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING) || - rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING) || - rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) { - tasklet_schedule(&rt2x00dev->txstatus_tasklet); - /* - * Mask out all txdone interrupts. - */ - rt2x00_set_field32(&mask, CSR8_TXDONE_TXRING, 1); - rt2x00_set_field32(&mask, CSR8_TXDONE_ATIMRING, 1); - rt2x00_set_field32(&mask, CSR8_TXDONE_PRIORING, 1); - } - - /* - * Disable all interrupts for which a tasklet was scheduled right now, - * the tasklet will reenable the appropriate interrupts. - */ - spin_lock(&rt2x00dev->irqmask_lock); - - rt2x00mmio_register_read(rt2x00dev, CSR8, ®); - reg |= mask; - rt2x00mmio_register_write(rt2x00dev, CSR8, reg); - - spin_unlock(&rt2x00dev->irqmask_lock); - - return IRQ_HANDLED; -} - -/* - * Device probe functions. - */ -static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) -{ - struct eeprom_93cx6 eeprom; - u32 reg; - u16 word; - u8 *mac; - - rt2x00mmio_register_read(rt2x00dev, CSR21, ®); - - eeprom.data = rt2x00dev; - eeprom.register_read = rt2500pci_eepromregister_read; - eeprom.register_write = rt2500pci_eepromregister_write; - eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ? - PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66; - eeprom.reg_data_in = 0; - eeprom.reg_data_out = 0; - eeprom.reg_data_clock = 0; - eeprom.reg_chip_select = 0; - - eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, - EEPROM_SIZE / sizeof(u16)); - - /* - * Start validation of the data that has been read. - */ - mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); - if (!is_valid_ether_addr(mac)) { - eth_random_addr(mac); - rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); - rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, - ANTENNA_SW_DIVERSITY); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, - ANTENNA_SW_DIVERSITY); - rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, - LED_MODE_DEFAULT); - rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); - rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); - rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); - rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); - rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); - rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); - rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); - rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word); - } - - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); - if (word == 0xffff) { - rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, - DEFAULT_RSSI_OFFSET); - rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); - rt2x00_eeprom_dbg(rt2x00dev, "Calibrate offset: 0x%04x\n", - word); - } - - return 0; -} - -static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) -{ - u32 reg; - u16 value; - u16 eeprom; - - /* - * Read EEPROM word for configuration. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); - - /* - * Identify RF chipset. - */ - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); - rt2x00mmio_register_read(rt2x00dev, CSR0, ®); - rt2x00_set_chip(rt2x00dev, RT2560, value, - rt2x00_get_field32(reg, CSR0_REVISION)); - - if (!rt2x00_rf(rt2x00dev, RF2522) && - !rt2x00_rf(rt2x00dev, RF2523) && - !rt2x00_rf(rt2x00dev, RF2524) && - !rt2x00_rf(rt2x00dev, RF2525) && - !rt2x00_rf(rt2x00dev, RF2525E) && - !rt2x00_rf(rt2x00dev, RF5222)) { - rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n"); - return -ENODEV; - } - - /* - * Identify default antenna configuration. - */ - rt2x00dev->default_ant.tx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); - rt2x00dev->default_ant.rx = - rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); - - /* - * Store led mode, for correct led behaviour. - */ -#ifdef CONFIG_RT2X00_LIB_LEDS - value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - - rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); - if (value == LED_MODE_TXRX_ACTIVITY || - value == LED_MODE_DEFAULT || - value == LED_MODE_ASUS) - rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual, - LED_TYPE_ACTIVITY); -#endif /* CONFIG_RT2X00_LIB_LEDS */ - - /* - * Detect if this device has an hardware controlled radio. - */ - if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) { - __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags); - /* - * On this device RFKILL initialized during probe does not work. - */ - __set_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags); - } - - /* - * Check if the BBP tuning should be enabled. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); - if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - - /* - * Read the RSSI <-> dBm offset information. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); - rt2x00dev->rssi_offset = - rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); - - return 0; -} - -/* - * RF value list for RF2522 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2522[] = { - { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, - { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, - { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, - { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, - { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, - { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, - { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, - { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, - { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, - { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, - { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, - { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, - { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, - { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, -}; - -/* - * RF value list for RF2523 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2523[] = { - { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, - { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, - { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, - { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, - { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, - { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, - { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, - { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, - { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, - { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, - { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, - { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, - { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, - { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, -}; - -/* - * RF value list for RF2524 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2524[] = { - { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, - { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, - { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, - { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, - { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, - { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, - { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, - { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, - { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, - { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, - { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, - { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, - { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, - { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, -}; - -/* - * RF value list for RF2525 - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525[] = { - { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, - { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, - { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, - { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, - { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, - { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, - { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, - { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, - { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, - { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, - { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, - { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, - { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, - { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, -}; - -/* - * RF value list for RF2525e - * Supports: 2.4 GHz - */ -static const struct rf_channel rf_vals_bg_2525e[] = { - { 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b }, - { 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b }, - { 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b }, - { 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b }, - { 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b }, - { 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b }, - { 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b }, - { 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b }, - { 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b }, - { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b }, - { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b }, - { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b }, - { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b }, - { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b }, -}; - -/* - * RF value list for RF5222 - * Supports: 2.4 GHz & 5.2 GHz - */ -static const struct rf_channel rf_vals_5222[] = { - { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, - { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, - { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, - { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, - { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, - { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, - { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, - { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, - { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, - { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, - { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, - { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, - { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, - { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, - - /* 802.11 UNI / HyperLan 2 */ - { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, - { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, - { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, - { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, - { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, - { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, - { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, - { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, - - /* 802.11 HyperLan 2 */ - { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, - { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, - { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, - { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, - { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, - { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, - { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, - { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, - { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, - { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, - - /* 802.11 UNII */ - { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, - { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, - { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, - { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, - { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, -}; - -static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) -{ - struct hw_mode_spec *spec = &rt2x00dev->spec; - struct channel_info *info; - char *tx_power; - unsigned int i; - - /* - * Initialize all hw fields. - */ - ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK); - ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS); - ieee80211_hw_set(rt2x00dev->hw, HOST_BROADCAST_PS_BUFFERING); - ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM); - - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); - SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, - rt2x00_eeprom_addr(rt2x00dev, - EEPROM_MAC_ADDR_0)); - - /* - * Disable powersaving as default. - */ - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - /* - * Initialize hw_mode information. - */ - spec->supported_bands = SUPPORT_BAND_2GHZ; - spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - - if (rt2x00_rf(rt2x00dev, RF2522)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); - spec->channels = rf_vals_bg_2522; - } else if (rt2x00_rf(rt2x00dev, RF2523)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); - spec->channels = rf_vals_bg_2523; - } else if (rt2x00_rf(rt2x00dev, RF2524)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); - spec->channels = rf_vals_bg_2524; - } else if (rt2x00_rf(rt2x00dev, RF2525)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); - spec->channels = rf_vals_bg_2525; - } else if (rt2x00_rf(rt2x00dev, RF2525E)) { - spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); - spec->channels = rf_vals_bg_2525e; - } else if (rt2x00_rf(rt2x00dev, RF5222)) { - spec->supported_bands |= SUPPORT_BAND_5GHZ; - spec->num_channels = ARRAY_SIZE(rf_vals_5222); - spec->channels = rf_vals_5222; - } - - /* - * Create channel information array - */ - info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - spec->channels_info = info; - - tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); - for (i = 0; i < 14; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]); - } - - if (spec->num_channels > 14) { - for (i = 14; i < spec->num_channels; i++) { - info[i].max_power = MAX_TXPOWER; - info[i].default_power1 = DEFAULT_TXPOWER; - } - } - - return 0; -} - -static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - /* - * Allocate eeprom data. - */ - retval = rt2500pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2500pci_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00mmio_register_read(rt2x00dev, GPIOCSR, ®); - rt2x00_set_field32(®, GPIOCSR_DIR0, 1); - rt2x00mmio_register_write(rt2x00dev, GPIOCSR, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2500pci_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device requires the atim queue and DMA-mapped skbs. - */ - __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; -} - -/* - * IEEE80211 stack callback functions. - */ -static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u64 tsf; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR17, ®); - tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32; - rt2x00mmio_register_read(rt2x00dev, CSR16, ®); - tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER); - - return tsf; -} - -static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - u32 reg; - - rt2x00mmio_register_read(rt2x00dev, CSR15, ®); - return rt2x00_get_field32(reg, CSR15_BEACON_SENT); -} - -static const struct ieee80211_ops rt2500pci_mac80211_ops = { - .tx = rt2x00mac_tx, - .start = rt2x00mac_start, - .stop = rt2x00mac_stop, - .add_interface = rt2x00mac_add_interface, - .remove_interface = rt2x00mac_remove_interface, - .config = rt2x00mac_config, - .configure_filter = rt2x00mac_configure_filter, - .sw_scan_start = rt2x00mac_sw_scan_start, - .sw_scan_complete = rt2x00mac_sw_scan_complete, - .get_stats = rt2x00mac_get_stats, - .bss_info_changed = rt2x00mac_bss_info_changed, - .conf_tx = rt2x00mac_conf_tx, - .get_tsf = rt2500pci_get_tsf, - .tx_last_beacon = rt2500pci_tx_last_beacon, - .rfkill_poll = rt2x00mac_rfkill_poll, - .flush = rt2x00mac_flush, - .set_antenna = rt2x00mac_set_antenna, - .get_antenna = rt2x00mac_get_antenna, - .get_ringparam = rt2x00mac_get_ringparam, - .tx_frames_pending = rt2x00mac_tx_frames_pending, -}; - -static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { - .irq_handler = rt2500pci_interrupt, - .txstatus_tasklet = rt2500pci_txstatus_tasklet, - .tbtt_tasklet = rt2500pci_tbtt_tasklet, - .rxdone_tasklet = rt2500pci_rxdone_tasklet, - .probe_hw = rt2500pci_probe_hw, - .initialize = rt2x00mmio_initialize, - .uninitialize = rt2x00mmio_uninitialize, - .get_entry_state = rt2500pci_get_entry_state, - .clear_entry = rt2500pci_clear_entry, - .set_device_state = rt2500pci_set_device_state, - .rfkill_poll = rt2500pci_rfkill_poll, - .link_stats = rt2500pci_link_stats, - .reset_tuner = rt2500pci_reset_tuner, - .link_tuner = rt2500pci_link_tuner, - .start_queue = rt2500pci_start_queue, - .kick_queue = rt2500pci_kick_queue, - .stop_queue = rt2500pci_stop_queue, - .flush_queue = rt2x00mmio_flush_queue, - .write_tx_desc = rt2500pci_write_tx_desc, - .write_beacon = rt2500pci_write_beacon, - .fill_rxdone = rt2500pci_fill_rxdone, - .config_filter = rt2500pci_config_filter, - .config_intf = rt2500pci_config_intf, - .config_erp = rt2500pci_config_erp, - .config_ant = rt2500pci_config_ant, - .config = rt2500pci_config, -}; - -static void rt2500pci_queue_init(struct data_queue *queue) -{ - switch (queue->qid) { - case QID_RX: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = RXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_AC_VO: - case QID_AC_VI: - case QID_AC_BE: - case QID_AC_BK: - queue->limit = 32; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_BEACON: - queue->limit = 1; - queue->data_size = MGMT_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - case QID_ATIM: - queue->limit = 8; - queue->data_size = DATA_FRAME_SIZE; - queue->desc_size = TXD_DESC_SIZE; - queue->priv_size = sizeof(struct queue_entry_priv_mmio); - break; - - default: - BUG(); - break; - } -} - -static const struct rt2x00_ops rt2500pci_ops = { - .name = KBUILD_MODNAME, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .queue_init = rt2500pci_queue_init, - .lib = &rt2500pci_rt2x00_ops, - .hw = &rt2500pci_mac80211_ops, -#ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500pci_rt2x00debug, -#endif /* CONFIG_RT2X00_LIB_DEBUGFS */ -}; - -/* - * RT2500pci module information. - */ -static const struct pci_device_id rt2500pci_device_table[] = { - { PCI_DEVICE(0x1814, 0x0201) }, - { 0, } -}; - -MODULE_AUTHOR(DRV_PROJECT); -MODULE_VERSION(DRV_VERSION); -MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver."); -MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards"); -MODULE_DEVICE_TABLE(pci, rt2500pci_device_table); -MODULE_LICENSE("GPL"); - -static int rt2500pci_probe(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - return rt2x00pci_probe(pci_dev, &rt2500pci_ops); -} - -static struct pci_driver rt2500pci_driver = { - .name = KBUILD_MODNAME, - .id_table = rt2500pci_device_table, - .probe = rt2500pci_probe, - .remove = rt2x00pci_remove, - .suspend = rt2x00pci_suspend, - .resume = rt2x00pci_resume, -}; - -module_pci_driver(rt2500pci_driver); -- cgit v1.2.3-54-g00ecf