From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/pci/hotplug/shpchp_ctrl.c | 730 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 730 insertions(+) create mode 100644 drivers/pci/hotplug/shpchp_ctrl.c (limited to 'drivers/pci/hotplug/shpchp_ctrl.c') diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c new file mode 100644 index 000000000..10c792759 --- /dev/null +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -0,0 +1,730 @@ +/* + * Standard Hot Plug Controller Driver + * + * Copyright (C) 1995,2001 Compaq Computer Corporation + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001 IBM Corp. + * Copyright (C) 2003-2004 Intel Corporation + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to , + * + */ + +#include +#include +#include +#include +#include +#include "../pci.h" +#include "shpchp.h" + +static void interrupt_event_handler(struct work_struct *work); +static int shpchp_enable_slot(struct slot *p_slot); +static int shpchp_disable_slot(struct slot *p_slot); + +static int queue_interrupt_event(struct slot *p_slot, u32 event_type) +{ + struct event_info *info; + + info = kmalloc(sizeof(*info), GFP_ATOMIC); + if (!info) + return -ENOMEM; + + info->event_type = event_type; + info->p_slot = p_slot; + INIT_WORK(&info->work, interrupt_event_handler); + + queue_work(p_slot->wq, &info->work); + + return 0; +} + +u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) +{ + struct slot *p_slot; + u32 event_type; + + /* Attention Button Change */ + ctrl_dbg(ctrl, "Attention button interrupt received\n"); + + p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + + /* + * Button pressed - See if need to TAKE ACTION!!! + */ + ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot)); + event_type = INT_BUTTON_PRESS; + + queue_interrupt_event(p_slot, event_type); + + return 0; + +} + +u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) +{ + struct slot *p_slot; + u8 getstatus; + u32 event_type; + + /* Switch Change */ + ctrl_dbg(ctrl, "Switch interrupt received\n"); + + p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + ctrl_dbg(ctrl, "Card present %x Power status %x\n", + p_slot->presence_save, p_slot->pwr_save); + + if (getstatus) { + /* + * Switch opened + */ + ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot)); + event_type = INT_SWITCH_OPEN; + if (p_slot->pwr_save && p_slot->presence_save) { + event_type = INT_POWER_FAULT; + ctrl_err(ctrl, "Surprise Removal of card\n"); + } + } else { + /* + * Switch closed + */ + ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot)); + event_type = INT_SWITCH_CLOSE; + } + + queue_interrupt_event(p_slot, event_type); + + return 1; +} + +u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) +{ + struct slot *p_slot; + u32 event_type; + + /* Presence Change */ + ctrl_dbg(ctrl, "Presence/Notify input change\n"); + + p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + /* + * Save the presence state + */ + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + if (p_slot->presence_save) { + /* + * Card Present + */ + ctrl_info(ctrl, "Card present on Slot(%s)\n", + slot_name(p_slot)); + event_type = INT_PRESENCE_ON; + } else { + /* + * Not Present + */ + ctrl_info(ctrl, "Card not present on Slot(%s)\n", + slot_name(p_slot)); + event_type = INT_PRESENCE_OFF; + } + + queue_interrupt_event(p_slot, event_type); + + return 1; +} + +u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) +{ + struct slot *p_slot; + u32 event_type; + + /* Power fault */ + ctrl_dbg(ctrl, "Power fault interrupt received\n"); + + p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + if (!(p_slot->hpc_ops->query_power_fault(p_slot))) { + /* + * Power fault Cleared + */ + ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n", + slot_name(p_slot)); + p_slot->status = 0x00; + event_type = INT_POWER_FAULT_CLEAR; + } else { + /* + * Power fault + */ + ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); + event_type = INT_POWER_FAULT; + /* set power fault status for this board */ + p_slot->status = 0xFF; + ctrl_info(ctrl, "Power fault bit %x set\n", hp_slot); + } + + queue_interrupt_event(p_slot, event_type); + + return 1; +} + +/* The following routines constitute the bulk of the + hotplug controller logic + */ +static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, + enum pci_bus_speed speed) +{ + int rc = 0; + + ctrl_dbg(ctrl, "Change speed to %d\n", speed); + rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed); + if (rc) { + ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n", + __func__); + return WRONG_BUS_FREQUENCY; + } + return rc; +} + +static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, + u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp, + enum pci_bus_speed msp) +{ + int rc = 0; + + /* + * If other slots on the same bus are occupied, we cannot + * change the bus speed. + */ + if (flag) { + if (asp < bsp) { + ctrl_err(ctrl, "Speed of bus %x and adapter %x mismatch\n", + bsp, asp); + rc = WRONG_BUS_FREQUENCY; + } + return rc; + } + + if (asp < msp) { + if (bsp != asp) + rc = change_bus_speed(ctrl, pslot, asp); + } else { + if (bsp != msp) + rc = change_bus_speed(ctrl, pslot, msp); + } + return rc; +} + +/** + * board_added - Called after a board has been added to the system. + * @p_slot: target &slot + * + * Turns power on for the board. + * Configures board. + */ +static int board_added(struct slot *p_slot) +{ + u8 hp_slot; + u8 slots_not_empty = 0; + int rc = 0; + enum pci_bus_speed asp, bsp, msp; + struct controller *ctrl = p_slot->ctrl; + struct pci_bus *parent = ctrl->pci_dev->subordinate; + + hp_slot = p_slot->device - ctrl->slot_device_offset; + + ctrl_dbg(ctrl, "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", + __func__, p_slot->device, ctrl->slot_device_offset, hp_slot); + + /* Power on slot without connecting to bus */ + rc = p_slot->hpc_ops->power_on_slot(p_slot); + if (rc) { + ctrl_err(ctrl, "Failed to power on slot\n"); + return -1; + } + + if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) { + rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz); + if (rc) { + ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n", + __func__); + return WRONG_BUS_FREQUENCY; + } + + /* turn on board, blink green LED, turn off Amber LED */ + rc = p_slot->hpc_ops->slot_enable(p_slot); + if (rc) { + ctrl_err(ctrl, "Issue of Slot Enable command failed\n"); + return rc; + } + } + + rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp); + if (rc) { + ctrl_err(ctrl, "Can't get adapter speed or bus mode mismatch\n"); + return WRONG_BUS_FREQUENCY; + } + + bsp = ctrl->pci_dev->subordinate->cur_bus_speed; + msp = ctrl->pci_dev->subordinate->max_bus_speed; + + /* Check if there are other slots or devices on the same bus */ + if (!list_empty(&ctrl->pci_dev->subordinate->devices)) + slots_not_empty = 1; + + ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, max_bus_speed %d\n", + __func__, slots_not_empty, asp, + bsp, msp); + + rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp); + if (rc) + return rc; + + /* turn on board, blink green LED, turn off Amber LED */ + rc = p_slot->hpc_ops->slot_enable(p_slot); + if (rc) { + ctrl_err(ctrl, "Issue of Slot Enable command failed\n"); + return rc; + } + + /* Wait for ~1 second */ + msleep(1000); + + ctrl_dbg(ctrl, "%s: slot status = %x\n", __func__, p_slot->status); + /* Check for a power fault */ + if (p_slot->status == 0xFF) { + /* power fault occurred, but it was benign */ + ctrl_dbg(ctrl, "%s: Power fault\n", __func__); + rc = POWER_FAILURE; + p_slot->status = 0; + goto err_exit; + } + + if (shpchp_configure_device(p_slot)) { + ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n", + pci_domain_nr(parent), p_slot->bus, p_slot->device); + goto err_exit; + } + + p_slot->status = 0; + p_slot->is_a_board = 0x01; + p_slot->pwr_save = 1; + + p_slot->hpc_ops->green_led_on(p_slot); + + return 0; + +err_exit: + /* turn off slot, turn on Amber LED, turn off Green LED */ + rc = p_slot->hpc_ops->slot_disable(p_slot); + if (rc) { + ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n", + __func__); + return rc; + } + + return(rc); +} + + +/** + * remove_board - Turns off slot and LEDs + * @p_slot: target &slot + */ +static int remove_board(struct slot *p_slot) +{ + struct controller *ctrl = p_slot->ctrl; + u8 hp_slot; + int rc; + + if (shpchp_unconfigure_device(p_slot)) + return(1); + + hp_slot = p_slot->device - ctrl->slot_device_offset; + p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); + + ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, hp_slot); + + /* Change status to shutdown */ + if (p_slot->is_a_board) + p_slot->status = 0x01; + + /* turn off slot, turn on Amber LED, turn off Green LED */ + rc = p_slot->hpc_ops->slot_disable(p_slot); + if (rc) { + ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n", + __func__); + return rc; + } + + rc = p_slot->hpc_ops->set_attention_status(p_slot, 0); + if (rc) { + ctrl_err(ctrl, "Issue of Set Attention command failed\n"); + return rc; + } + + p_slot->pwr_save = 0; + p_slot->is_a_board = 0; + + return 0; +} + + +struct pushbutton_work_info { + struct slot *p_slot; + struct work_struct work; +}; + +/** + * shpchp_pushbutton_thread - handle pushbutton events + * @work: &struct work_struct to be handled + * + * Scheduled procedure to handle blocking stuff for the pushbuttons. + * Handles all pending events and exits. + */ +static void shpchp_pushbutton_thread(struct work_struct *work) +{ + struct pushbutton_work_info *info = + container_of(work, struct pushbutton_work_info, work); + struct slot *p_slot = info->p_slot; + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case POWEROFF_STATE: + mutex_unlock(&p_slot->lock); + shpchp_disable_slot(p_slot); + mutex_lock(&p_slot->lock); + p_slot->state = STATIC_STATE; + break; + case POWERON_STATE: + mutex_unlock(&p_slot->lock); + if (shpchp_enable_slot(p_slot)) + p_slot->hpc_ops->green_led_off(p_slot); + mutex_lock(&p_slot->lock); + p_slot->state = STATIC_STATE; + break; + default: + break; + } + mutex_unlock(&p_slot->lock); + + kfree(info); +} + +void shpchp_queue_pushbutton_work(struct work_struct *work) +{ + struct slot *p_slot = container_of(work, struct slot, work.work); + struct pushbutton_work_info *info; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n", + __func__); + return; + } + info->p_slot = p_slot; + INIT_WORK(&info->work, shpchp_pushbutton_thread); + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case BLINKINGOFF_STATE: + p_slot->state = POWEROFF_STATE; + break; + case BLINKINGON_STATE: + p_slot->state = POWERON_STATE; + break; + default: + kfree(info); + goto out; + } + queue_work(p_slot->wq, &info->work); + out: + mutex_unlock(&p_slot->lock); +} + +static int update_slot_info (struct slot *slot) +{ + struct hotplug_slot_info *info; + int result; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + slot->hpc_ops->get_power_status(slot, &(info->power_status)); + slot->hpc_ops->get_attention_status(slot, &(info->attention_status)); + slot->hpc_ops->get_latch_status(slot, &(info->latch_status)); + slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status)); + + result = pci_hp_change_slot_info(slot->hotplug_slot, info); + kfree (info); + return result; +} + +/* + * Note: This function must be called with slot->lock held + */ +static void handle_button_press_event(struct slot *p_slot) +{ + u8 getstatus; + struct controller *ctrl = p_slot->ctrl; + + switch (p_slot->state) { + case STATIC_STATE: + p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (getstatus) { + p_slot->state = BLINKINGOFF_STATE; + ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n", + slot_name(p_slot)); + } else { + p_slot->state = BLINKINGON_STATE; + ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n", + slot_name(p_slot)); + } + /* blink green LED and turn off amber */ + p_slot->hpc_ops->green_led_blink(p_slot); + p_slot->hpc_ops->set_attention_status(p_slot, 0); + + queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ); + break; + case BLINKINGOFF_STATE: + case BLINKINGON_STATE: + /* + * Cancel if we are still blinking; this means that we + * press the attention again before the 5 sec. limit + * expires to cancel hot-add or hot-remove + */ + ctrl_info(ctrl, "Button cancel on Slot(%s)\n", + slot_name(p_slot)); + cancel_delayed_work(&p_slot->work); + if (p_slot->state == BLINKINGOFF_STATE) + p_slot->hpc_ops->green_led_on(p_slot); + else + p_slot->hpc_ops->green_led_off(p_slot); + p_slot->hpc_ops->set_attention_status(p_slot, 0); + ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n", + slot_name(p_slot)); + p_slot->state = STATIC_STATE; + break; + case POWEROFF_STATE: + case POWERON_STATE: + /* + * Ignore if the slot is on power-on or power-off state; + * this means that the previous attention button action + * to hot-add or hot-remove is undergoing + */ + ctrl_info(ctrl, "Button ignore on Slot(%s)\n", + slot_name(p_slot)); + update_slot_info(p_slot); + break; + default: + ctrl_warn(ctrl, "Not a valid state\n"); + break; + } +} + +static void interrupt_event_handler(struct work_struct *work) +{ + struct event_info *info = container_of(work, struct event_info, work); + struct slot *p_slot = info->p_slot; + + mutex_lock(&p_slot->lock); + switch (info->event_type) { + case INT_BUTTON_PRESS: + handle_button_press_event(p_slot); + break; + case INT_POWER_FAULT: + ctrl_dbg(p_slot->ctrl, "%s: Power fault\n", __func__); + p_slot->hpc_ops->set_attention_status(p_slot, 1); + p_slot->hpc_ops->green_led_off(p_slot); + break; + default: + update_slot_info(p_slot); + break; + } + mutex_unlock(&p_slot->lock); + + kfree(info); +} + + +static int shpchp_enable_slot (struct slot *p_slot) +{ + u8 getstatus = 0; + int rc, retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; + + /* Check to see if (latch closed, card present, power off) */ + mutex_lock(&p_slot->ctrl->crit_sect); + rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); + if (rc || !getstatus) { + ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); + goto out; + } + rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + if (rc || getstatus) { + ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot)); + goto out; + } + rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (rc || getstatus) { + ctrl_info(ctrl, "Already enabled on slot(%s)\n", + slot_name(p_slot)); + goto out; + } + + p_slot->is_a_board = 1; + + /* We have to save the presence info for these slots */ + p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); + p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); + ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + + if (((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) || + (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458)) + && p_slot->ctrl->num_slots == 1) { + /* handle amd pogo errata; this must be done before enable */ + amd_pogo_errata_save_misc_reg(p_slot); + retval = board_added(p_slot); + /* handle amd pogo errata; this must be done after enable */ + amd_pogo_errata_restore_misc_reg(p_slot); + } else + retval = board_added(p_slot); + + if (retval) { + p_slot->hpc_ops->get_adapter_status(p_slot, + &(p_slot->presence_save)); + p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + } + + update_slot_info(p_slot); + out: + mutex_unlock(&p_slot->ctrl->crit_sect); + return retval; +} + + +static int shpchp_disable_slot (struct slot *p_slot) +{ + u8 getstatus = 0; + int rc, retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; + + if (!p_slot->ctrl) + return -ENODEV; + + /* Check to see if (latch closed, card present, power on) */ + mutex_lock(&p_slot->ctrl->crit_sect); + + rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); + if (rc || !getstatus) { + ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot)); + goto out; + } + rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); + if (rc || getstatus) { + ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot)); + goto out; + } + rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); + if (rc || !getstatus) { + ctrl_info(ctrl, "Already disabled on slot(%s)\n", + slot_name(p_slot)); + goto out; + } + + retval = remove_board(p_slot); + update_slot_info(p_slot); + out: + mutex_unlock(&p_slot->ctrl->crit_sect); + return retval; +} + +int shpchp_sysfs_enable_slot(struct slot *p_slot) +{ + int retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case BLINKINGON_STATE: + cancel_delayed_work(&p_slot->work); + case STATIC_STATE: + p_slot->state = POWERON_STATE; + mutex_unlock(&p_slot->lock); + retval = shpchp_enable_slot(p_slot); + mutex_lock(&p_slot->lock); + p_slot->state = STATIC_STATE; + break; + case POWERON_STATE: + ctrl_info(ctrl, "Slot %s is already in powering on state\n", + slot_name(p_slot)); + break; + case BLINKINGOFF_STATE: + case POWEROFF_STATE: + ctrl_info(ctrl, "Already enabled on slot %s\n", + slot_name(p_slot)); + break; + default: + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); + break; + } + mutex_unlock(&p_slot->lock); + + return retval; +} + +int shpchp_sysfs_disable_slot(struct slot *p_slot) +{ + int retval = -ENODEV; + struct controller *ctrl = p_slot->ctrl; + + mutex_lock(&p_slot->lock); + switch (p_slot->state) { + case BLINKINGOFF_STATE: + cancel_delayed_work(&p_slot->work); + case STATIC_STATE: + p_slot->state = POWEROFF_STATE; + mutex_unlock(&p_slot->lock); + retval = shpchp_disable_slot(p_slot); + mutex_lock(&p_slot->lock); + p_slot->state = STATIC_STATE; + break; + case POWEROFF_STATE: + ctrl_info(ctrl, "Slot %s is already in powering off state\n", + slot_name(p_slot)); + break; + case BLINKINGON_STATE: + case POWERON_STATE: + ctrl_info(ctrl, "Already disabled on slot %s\n", + slot_name(p_slot)); + break; + default: + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); + break; + } + mutex_unlock(&p_slot->lock); + + return retval; +} -- cgit v1.2.3-54-g00ecf