From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/phy/Kconfig | 316 +++++++ drivers/phy/Makefile | 42 + drivers/phy/phy-armada375-usb2.c | 159 ++++ drivers/phy/phy-bcm-kona-usb2.c | 155 ++++ drivers/phy/phy-berlin-sata.c | 291 ++++++ drivers/phy/phy-berlin-usb.c | 218 +++++ drivers/phy/phy-core.c | 906 ++++++++++++++++++ drivers/phy/phy-dm816x-usb.c | 290 ++++++ drivers/phy/phy-exynos-dp-video.c | 122 +++ drivers/phy/phy-exynos-mipi-video.c | 196 ++++ drivers/phy/phy-exynos4210-usb2.c | 260 ++++++ drivers/phy/phy-exynos4x12-usb2.c | 378 ++++++++ drivers/phy/phy-exynos5-usbdrd.c | 782 ++++++++++++++++ drivers/phy/phy-exynos5250-sata.c | 250 +++++ drivers/phy/phy-exynos5250-usb2.c | 401 ++++++++ drivers/phy/phy-hix5hd2-sata.c | 191 ++++ drivers/phy/phy-miphy28lp.c | 1285 ++++++++++++++++++++++++++ drivers/phy/phy-miphy365x.c | 624 +++++++++++++ drivers/phy/phy-mvebu-sata.c | 138 +++ drivers/phy/phy-omap-control.c | 360 ++++++++ drivers/phy/phy-omap-usb2.c | 389 ++++++++ drivers/phy/phy-qcom-apq8064-sata.c | 287 ++++++ drivers/phy/phy-qcom-ipq806x-sata.c | 209 +++++ drivers/phy/phy-qcom-ufs-i.h | 159 ++++ drivers/phy/phy-qcom-ufs-qmp-14nm.c | 201 ++++ drivers/phy/phy-qcom-ufs-qmp-14nm.h | 177 ++++ drivers/phy/phy-qcom-ufs-qmp-20nm.c | 257 ++++++ drivers/phy/phy-qcom-ufs-qmp-20nm.h | 235 +++++ drivers/phy/phy-qcom-ufs.c | 738 +++++++++++++++ drivers/phy/phy-rcar-gen2.c | 341 +++++++ drivers/phy/phy-rockchip-usb.c | 158 ++++ drivers/phy/phy-s5pv210-usb2.c | 187 ++++ drivers/phy/phy-samsung-usb2.c | 246 +++++ drivers/phy/phy-samsung-usb2.h | 71 ++ drivers/phy/phy-spear1310-miphy.c | 261 ++++++ drivers/phy/phy-spear1340-miphy.c | 294 ++++++ drivers/phy/phy-stih407-usb.c | 180 ++++ drivers/phy/phy-stih41x-usb.c | 188 ++++ drivers/phy/phy-sun4i-usb.c | 338 +++++++ drivers/phy/phy-sun9i-usb.c | 202 ++++ drivers/phy/phy-ti-pipe3.c | 605 ++++++++++++ drivers/phy/phy-twl4030-usb.c | 808 ++++++++++++++++ drivers/phy/phy-xgene.c | 1735 +++++++++++++++++++++++++++++++++++ 43 files changed, 15630 insertions(+) create mode 100644 drivers/phy/Kconfig create mode 100644 drivers/phy/Makefile create mode 100644 drivers/phy/phy-armada375-usb2.c create mode 100644 drivers/phy/phy-bcm-kona-usb2.c create mode 100644 drivers/phy/phy-berlin-sata.c create mode 100644 drivers/phy/phy-berlin-usb.c create mode 100644 drivers/phy/phy-core.c create mode 100644 drivers/phy/phy-dm816x-usb.c create mode 100644 drivers/phy/phy-exynos-dp-video.c create mode 100644 drivers/phy/phy-exynos-mipi-video.c create mode 100644 drivers/phy/phy-exynos4210-usb2.c create mode 100644 drivers/phy/phy-exynos4x12-usb2.c create mode 100644 drivers/phy/phy-exynos5-usbdrd.c create mode 100644 drivers/phy/phy-exynos5250-sata.c create mode 100644 drivers/phy/phy-exynos5250-usb2.c create mode 100644 drivers/phy/phy-hix5hd2-sata.c create mode 100644 drivers/phy/phy-miphy28lp.c create mode 100644 drivers/phy/phy-miphy365x.c create mode 100644 drivers/phy/phy-mvebu-sata.c create mode 100644 drivers/phy/phy-omap-control.c create mode 100644 drivers/phy/phy-omap-usb2.c create mode 100644 drivers/phy/phy-qcom-apq8064-sata.c create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c create mode 100644 drivers/phy/phy-qcom-ufs-i.h create mode 100644 drivers/phy/phy-qcom-ufs-qmp-14nm.c create mode 100644 drivers/phy/phy-qcom-ufs-qmp-14nm.h create mode 100644 drivers/phy/phy-qcom-ufs-qmp-20nm.c create mode 100644 drivers/phy/phy-qcom-ufs-qmp-20nm.h create mode 100644 drivers/phy/phy-qcom-ufs.c create mode 100644 drivers/phy/phy-rcar-gen2.c create mode 100644 drivers/phy/phy-rockchip-usb.c create mode 100644 drivers/phy/phy-s5pv210-usb2.c create mode 100644 drivers/phy/phy-samsung-usb2.c create mode 100644 drivers/phy/phy-samsung-usb2.h create mode 100644 drivers/phy/phy-spear1310-miphy.c create mode 100644 drivers/phy/phy-spear1340-miphy.c create mode 100644 drivers/phy/phy-stih407-usb.c create mode 100644 drivers/phy/phy-stih41x-usb.c create mode 100644 drivers/phy/phy-sun4i-usb.c create mode 100644 drivers/phy/phy-sun9i-usb.c create mode 100644 drivers/phy/phy-ti-pipe3.c create mode 100644 drivers/phy/phy-twl4030-usb.c create mode 100644 drivers/phy/phy-xgene.c (limited to 'drivers/phy') diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig new file mode 100644 index 000000000..fc9b9f0ea --- /dev/null +++ b/drivers/phy/Kconfig @@ -0,0 +1,316 @@ +# +# PHY +# + +menu "PHY Subsystem" + +config GENERIC_PHY + bool "PHY Core" + help + Generic PHY support. + + This framework is designed to provide a generic interface for PHY + devices present in the kernel. This layer will have the generic + API by which phy drivers can create PHY using the phy framework and + phy users can obtain reference to the PHY. All the users of this + framework should select this config. + +config PHY_BERLIN_USB + tristate "Marvell Berlin USB PHY Driver" + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the USB PHY on Marvell Berlin SoCs. + +config PHY_BERLIN_SATA + tristate "Marvell Berlin SATA PHY driver" + depends on ARCH_BERLIN && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the SATA PHY on Marvell Berlin SoCs. + +config ARMADA375_USBCLUSTER_PHY + def_bool y + depends on MACH_ARMADA_375 || COMPILE_TEST + depends on OF + select GENERIC_PHY + +config PHY_DM816X_USB + tristate "TI dm816x USB PHY driver" + depends on ARCH_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this for dm816x USB to work. + +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and EXYNOS SoCs. + +config PHY_MVEBU_SATA + def_bool y + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD + depends on OF + select GENERIC_PHY + +config PHY_MIPHY28LP + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" + depends on ARCH_STI + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) + that is part of STMicroelectronics STiH407 SoC. + +config PHY_MIPHY365X + tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series" + depends on ARCH_STI + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE) + that is part of STMicroelectronics STiH41x SoC series. + +config PHY_RCAR_GEN2 + tristate "Renesas R-Car generation 2 USB PHY driver" + depends on ARCH_SHMOBILE + depends on GENERIC_PHY + help + Support for USB PHY found on Renesas R-Car generation 2 SoCs. + +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + +config TI_PIPE3 + tristate "TI PIPE3 PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the PIPE3 PHY that is part of TI SOCs. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control PHY Driver" to power + on/off the PHY. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. + +config PHY_EXYNOS_DP_VIDEO + tristate "EXYNOS SoC series Display Port PHY driver" + depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS + select GENERIC_PHY + help + Support for Display Port PHY found on Samsung EXYNOS SoCs. + +config BCM_KONA_USB2_PHY + tristate "Broadcom Kona USB2 PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the Broadcom Kona USB 2.0 PHY. + +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. + +config PHY_HIX5HD2_SATA + tristate "HIX5HD2 SATA PHY Driver" + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM + select GENERIC_PHY + select MFD_SYSCON + help + Support for SATA PHY on Hisilicon hix5hd2 Soc. + +config PHY_SUN4I_USB + tristate "Allwinner sunxi SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sunxi SoCs. + + This driver controls the entire USB PHY block, both the USB OTG + parts, as well as the 2 regular USB 2 host PHYs. + +config PHY_SUN9I_USB + tristate "Allwinner sun9i SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sun9i SoCs. + + This driver controls each individual USB 2 host PHY. + +config PHY_SAMSUNG_USB2 + tristate "Samsung USB 2.0 PHY driver" + depends on HAS_IOMEM + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 + select GENERIC_PHY + select MFD_SYSCON + default ARCH_EXYNOS + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + SoCs. This driver provides the interface for USB 2.0 PHY. Support + for particular PHYs will be enabled based on the SoC type in addition + to this driver. + +config PHY_S5PV210_USB2 + bool "Support for S5PV210" + depends on PHY_SAMSUNG_USB2 + depends on ARCH_S5PV210 + help + Enable USB PHY support for S5PV210. This option requires that Samsung + USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of S5PV210 two phys + are available - device and host. + +config PHY_EXYNOS4210_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default CPU_EXYNOS4210 + +config PHY_EXYNOS4X12_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 + +config PHY_EXYNOS5250_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS5250 || SOC_EXYNOS5420 + +config PHY_EXYNOS5_USBDRD + tristate "Exynos5 SoC series USB DRD PHY driver" + depends on ARCH_EXYNOS && OF + depends on HAS_IOMEM + depends on USB_DWC3_EXYNOS + select GENERIC_PHY + select MFD_SYSCON + default y + help + Enable USB DRD PHY support for Exynos 5 SoC series. + This driver provides PHY interface for USB 3.0 DRD controller + present on Exynos5 SoC series. + +config PHY_QCOM_APQ8064_SATA + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_ROCKCHIP_USB + tristate "Rockchip USB2 PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip USB 2.0 PHY. + +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1310 || COMPILE_TEST + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1340 || COMPILE_TEST + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + +config PHY_XGENE + tristate "APM X-Gene 15Gbps PHY support" + depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for APM X-Gene SoC multi-purpose PHY. + +config PHY_STIH407_USB + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on RESET_CONTROLLER + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this support to enable the picoPHY device used by USB2 + and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STIH41X_USB + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" + depends on ARCH_STI + select GENERIC_PHY + help + Enable this to support the USB transceiver that is part of + STMicroelectronics STiH41x SoC series. + +config PHY_QCOM_UFS + tristate "Qualcomm UFS PHY driver" + depends on OF && ARCH_QCOM + select GENERIC_PHY + help + Support for UFS PHY on QCOM chipsets. + +endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile new file mode 100644 index 000000000..f12625178 --- /dev/null +++ b/drivers/phy/Makefile @@ -0,0 +1,42 @@ +# +# Makefile for the phy drivers. +# + +obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o +obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o +obj-$(CONFIG_PHY_XGENE) += phy-xgene.o +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/phy-armada375-usb2.c new file mode 100644 index 000000000..8ccc3952c --- /dev/null +++ b/drivers/phy/phy-armada375-usb2.c @@ -0,0 +1,159 @@ +/* + * USB cluster support for Armada 375 platform. + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2 or later. This program is licensed "as is" + * without any warranty of any kind, whether express or implied. + * + * Armada 375 comes with an USB2 host and device controller and an + * USB3 controller. The USB cluster control register allows to manage + * common features of both USB controllers. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB2_PHY_CONFIG_DISABLE BIT(0) + +struct armada375_cluster_phy { + struct phy *phy; + void __iomem *reg; + bool use_usb3; + int phy_provided; +}; + +static int armada375_usb_phy_init(struct phy *phy) +{ + struct armada375_cluster_phy *cluster_phy; + u32 reg; + + cluster_phy = phy_get_drvdata(phy); + if (!cluster_phy) + return -ENODEV; + + reg = readl(cluster_phy->reg); + if (cluster_phy->use_usb3) + reg |= USB2_PHY_CONFIG_DISABLE; + else + reg &= ~USB2_PHY_CONFIG_DISABLE; + writel(reg, cluster_phy->reg); + + return 0; +} + +static struct phy_ops armada375_usb_phy_ops = { + .init = armada375_usb_phy_init, + .owner = THIS_MODULE, +}; + +/* + * Only one controller can use this PHY. We shouldn't have the case + * when two controllers want to use this PHY. But if this case occurs + * then we provide a phy to the first one and return an error for the + * next one. This error has also to be an error returned by + * devm_phy_optional_get() so different from ENODEV for USB2. In the + * USB3 case it still optional and we use ENODEV. + */ +static struct phy *armada375_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct armada375_cluster_phy *cluster_phy = dev_get_drvdata(dev); + + if (!cluster_phy) + return ERR_PTR(-ENODEV); + + /* + * Either the phy had never been requested and then the first + * usb claiming it can get it, or it had already been + * requested in this case, we only allow to use it with the + * same configuration. + */ + if (WARN_ON((cluster_phy->phy_provided != PHY_NONE) && + (cluster_phy->phy_provided != args->args[0]))) { + dev_err(dev, "This PHY has already been provided!\n"); + dev_err(dev, "Check your device tree, only one controller can use it\n."); + if (args->args[0] == PHY_TYPE_USB2) + return ERR_PTR(-EBUSY); + else + return ERR_PTR(-ENODEV); + } + + if (args->args[0] == PHY_TYPE_USB2) + cluster_phy->use_usb3 = false; + else if (args->args[0] == PHY_TYPE_USB3) + cluster_phy->use_usb3 = true; + else { + dev_err(dev, "Invalid PHY mode\n"); + return ERR_PTR(-ENODEV); + } + + /* Store which phy mode is used for next test */ + cluster_phy->phy_provided = args->args[0]; + + return cluster_phy->phy; +} + +static int armada375_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *phy; + struct phy_provider *phy_provider; + void __iomem *usb_cluster_base; + struct resource *res; + struct armada375_cluster_phy *cluster_phy; + + cluster_phy = devm_kzalloc(dev, sizeof(*cluster_phy), GFP_KERNEL); + if (!cluster_phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + usb_cluster_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(usb_cluster_base)) + return PTR_ERR(usb_cluster_base); + + phy = devm_phy_create(dev, NULL, &armada375_usb_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + cluster_phy->phy = phy; + cluster_phy->reg = usb_cluster_base; + + dev_set_drvdata(dev, cluster_phy); + phy_set_drvdata(phy, cluster_phy); + + phy_provider = devm_of_phy_provider_register(&pdev->dev, + armada375_usb_phy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id of_usb_cluster_table[] = { + { .compatible = "marvell,armada-375-usb-cluster", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, of_usb_cluster_table); + +static struct platform_driver armada375_usb_phy_driver = { + .probe = armada375_usb_phy_probe, + .driver = { + .of_match_table = of_usb_cluster_table, + .name = "armada-375-usb-cluster", + .owner = THIS_MODULE, + } +}; +module_platform_driver(armada375_usb_phy_driver); + +MODULE_DESCRIPTION("Armada 375 USB cluster driver"); +MODULE_AUTHOR("Gregory CLEMENT "); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/phy-bcm-kona-usb2.c new file mode 100644 index 000000000..ef2dc1aab --- /dev/null +++ b/drivers/phy/phy-bcm-kona-usb2.c @@ -0,0 +1,155 @@ +/* + * phy-bcm-kona-usb2.c - Broadcom Kona USB2 Phy Driver + * + * Copyright (C) 2013 Linaro Limited + * Matt Porter + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define OTGCTL (0) +#define OTGCTL_OTGSTAT2 BIT(31) +#define OTGCTL_OTGSTAT1 BIT(30) +#define OTGCTL_PRST_N_SW BIT(11) +#define OTGCTL_HRESET_N BIT(10) +#define OTGCTL_UTMI_LINE_STATE1 BIT(9) +#define OTGCTL_UTMI_LINE_STATE0 BIT(8) + +#define P1CTL (8) +#define P1CTL_SOFT_RESET BIT(1) +#define P1CTL_NON_DRIVING BIT(0) + +struct bcm_kona_usb { + void __iomem *regs; +}; + +static void bcm_kona_usb_phy_power(struct bcm_kona_usb *phy, int on) +{ + u32 val; + + val = readl(phy->regs + OTGCTL); + if (on) { + /* Configure and power PHY */ + val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 | + OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0); + val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N; + } else { + val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N); + } + writel(val, phy->regs + OTGCTL); +} + +static int bcm_kona_usb_phy_init(struct phy *gphy) +{ + struct bcm_kona_usb *phy = phy_get_drvdata(gphy); + u32 val; + + /* Soft reset PHY */ + val = readl(phy->regs + P1CTL); + val &= ~P1CTL_NON_DRIVING; + val |= P1CTL_SOFT_RESET; + writel(val, phy->regs + P1CTL); + writel(val & ~P1CTL_SOFT_RESET, phy->regs + P1CTL); + /* Reset needs to be asserted for 2ms */ + mdelay(2); + writel(val | P1CTL_SOFT_RESET, phy->regs + P1CTL); + + return 0; +} + +static int bcm_kona_usb_phy_power_on(struct phy *gphy) +{ + struct bcm_kona_usb *phy = phy_get_drvdata(gphy); + + bcm_kona_usb_phy_power(phy, 1); + + return 0; +} + +static int bcm_kona_usb_phy_power_off(struct phy *gphy) +{ + struct bcm_kona_usb *phy = phy_get_drvdata(gphy); + + bcm_kona_usb_phy_power(phy, 0); + + return 0; +} + +static struct phy_ops ops = { + .init = bcm_kona_usb_phy_init, + .power_on = bcm_kona_usb_phy_power_on, + .power_off = bcm_kona_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int bcm_kona_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bcm_kona_usb *phy; + struct resource *res; + struct phy *gphy; + struct phy_provider *phy_provider; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(phy->regs)) + return PTR_ERR(phy->regs); + + platform_set_drvdata(pdev, phy); + + gphy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(gphy)) + return PTR_ERR(gphy); + + /* The Kona PHY supports an 8-bit wide UTMI interface */ + phy_set_bus_width(gphy, 8); + + phy_set_drvdata(gphy, phy); + + phy_provider = devm_of_phy_provider_register(dev, + of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id bcm_kona_usb2_dt_ids[] = { + { .compatible = "brcm,kona-usb2-phy" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, bcm_kona_usb2_dt_ids); + +static struct platform_driver bcm_kona_usb2_driver = { + .probe = bcm_kona_usb2_probe, + .driver = { + .name = "bcm-kona-usb2", + .of_match_table = bcm_kona_usb2_dt_ids, + }, +}; + +module_platform_driver(bcm_kona_usb2_driver); + +MODULE_ALIAS("platform:bcm-kona-usb2"); +MODULE_AUTHOR("Matt Porter "); +MODULE_DESCRIPTION("BCM Kona USB 2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c new file mode 100644 index 000000000..6f3e06d68 --- /dev/null +++ b/drivers/phy/phy-berlin-sata.c @@ -0,0 +1,291 @@ +/* + * Marvell Berlin SATA PHY driver + * + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Ténart + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include + +#define HOST_VSA_ADDR 0x0 +#define HOST_VSA_DATA 0x4 +#define PORT_SCR_CTL 0x2c +#define PORT_VSR_ADDR 0x78 +#define PORT_VSR_DATA 0x7c + +#define CONTROL_REGISTER 0x0 +#define MBUS_SIZE_CONTROL 0x4 + +#define POWER_DOWN_PHY0 BIT(6) +#define POWER_DOWN_PHY1 BIT(14) +#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16) +#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19) + +#define BG2_PHY_BASE 0x080 +#define BG2Q_PHY_BASE 0x200 + +/* register 0x01 */ +#define REF_FREF_SEL_25 BIT(0) +#define PHY_MODE_SATA (0x0 << 5) + +/* register 0x02 */ +#define USE_MAX_PLL_RATE BIT(12) + +/* register 0x23 */ +#define DATA_BIT_WIDTH_10 (0x0 << 10) +#define DATA_BIT_WIDTH_20 (0x1 << 10) +#define DATA_BIT_WIDTH_40 (0x2 << 10) + +/* register 0x25 */ +#define PHY_GEN_MAX_1_5 (0x0 << 10) +#define PHY_GEN_MAX_3_0 (0x1 << 10) +#define PHY_GEN_MAX_6_0 (0x2 << 10) + +struct phy_berlin_desc { + struct phy *phy; + u32 power_bit; + unsigned index; +}; + +struct phy_berlin_priv { + void __iomem *base; + spinlock_t lock; + struct clk *clk; + struct phy_berlin_desc **phys; + unsigned nphys; + u32 phy_base; +}; + +static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg, + u32 phy_base, u32 reg, u32 mask, u32 val) +{ + u32 regval; + + /* select register */ + writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR); + + /* set bits */ + regval = readl(ctrl_reg + PORT_VSR_DATA); + regval &= ~mask; + regval |= val; + writel(regval, ctrl_reg + PORT_VSR_DATA); +} + +static int phy_berlin_sata_power_on(struct phy *phy) +{ + struct phy_berlin_desc *desc = phy_get_drvdata(phy); + struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent); + void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80); + int ret = 0; + u32 regval; + + clk_prepare_enable(priv->clk); + + spin_lock(&priv->lock); + + /* Power on PHY */ + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval &= ~desc->power_bit; + writel(regval, priv->base + HOST_VSA_DATA); + + /* Configure MBus */ + writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128; + writel(regval, priv->base + HOST_VSA_DATA); + + /* set PHY mode and ref freq to 25 MHz */ + phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01, + 0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA); + + /* set PHY up to 6 Gbps */ + phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25, + 0x0c00, PHY_GEN_MAX_6_0); + + /* set 40 bits width */ + phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23, + 0x0c00, DATA_BIT_WIDTH_40); + + /* use max pll rate */ + phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02, + 0x0000, USE_MAX_PLL_RATE); + + /* set Gen3 controller speed */ + regval = readl(ctrl_reg + PORT_SCR_CTL); + regval &= ~GENMASK(7, 4); + regval |= 0x30; + writel(regval, ctrl_reg + PORT_SCR_CTL); + + spin_unlock(&priv->lock); + + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int phy_berlin_sata_power_off(struct phy *phy) +{ + struct phy_berlin_desc *desc = phy_get_drvdata(phy); + struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent); + u32 regval; + + clk_prepare_enable(priv->clk); + + spin_lock(&priv->lock); + + /* Power down PHY */ + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval |= desc->power_bit; + writel(regval, priv->base + HOST_VSA_DATA); + + spin_unlock(&priv->lock); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +static struct phy *phy_berlin_sata_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct phy_berlin_priv *priv = dev_get_drvdata(dev); + int i; + + if (WARN_ON(args->args[0] >= priv->nphys)) + return ERR_PTR(-ENODEV); + + for (i = 0; i < priv->nphys; i++) { + if (priv->phys[i]->index == args->args[0]) + break; + } + + if (i == priv->nphys) + return ERR_PTR(-ENODEV); + + return priv->phys[i]->phy; +} + +static struct phy_ops phy_berlin_sata_ops = { + .power_on = phy_berlin_sata_power_on, + .power_off = phy_berlin_sata_power_off, + .owner = THIS_MODULE, +}; + +static u32 phy_berlin_power_down_bits[] = { + POWER_DOWN_PHY0, + POWER_DOWN_PHY1, +}; + +static int phy_berlin_sata_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child; + struct phy *phy; + struct phy_provider *phy_provider; + struct phy_berlin_priv *priv; + struct resource *res; + int i = 0; + u32 phy_id; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + priv->base = devm_ioremap(dev, res->start, resource_size(res)); + if (!priv->base) + return -ENOMEM; + + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->nphys = of_get_child_count(dev->of_node); + if (priv->nphys == 0) + return -ENODEV; + + priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys), + GFP_KERNEL); + if (!priv->phys) + return -ENOMEM; + + if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy")) + priv->phy_base = BG2_PHY_BASE; + else + priv->phy_base = BG2Q_PHY_BASE; + + dev_set_drvdata(dev, priv); + spin_lock_init(&priv->lock); + + for_each_available_child_of_node(dev->of_node, child) { + struct phy_berlin_desc *phy_desc; + + if (of_property_read_u32(child, "reg", &phy_id)) { + dev_err(dev, "missing reg property in node %s\n", + child->name); + return -EINVAL; + } + + if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) { + dev_err(dev, "invalid reg in node %s\n", child->name); + return -EINVAL; + } + + phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL); + if (!phy_desc) + return -ENOMEM; + + phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", phy_id); + return PTR_ERR(phy); + } + + phy_desc->phy = phy; + phy_desc->power_bit = phy_berlin_power_down_bits[phy_id]; + phy_desc->index = phy_id; + phy_set_drvdata(phy, phy_desc); + + priv->phys[i++] = phy_desc; + + /* Make sure the PHY is off */ + phy_berlin_sata_power_off(phy); + } + + phy_provider = + devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_berlin_sata_of_match[] = { + { .compatible = "marvell,berlin2-sata-phy" }, + { .compatible = "marvell,berlin2q-sata-phy" }, + { }, +}; + +static struct platform_driver phy_berlin_sata_driver = { + .probe = phy_berlin_sata_probe, + .driver = { + .name = "phy-berlin-sata", + .of_match_table = phy_berlin_sata_of_match, + }, +}; +module_platform_driver(phy_berlin_sata_driver); + +MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver"); +MODULE_AUTHOR("Antoine Ténart "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c new file mode 100644 index 000000000..ab54f2864 --- /dev/null +++ b/drivers/phy/phy-berlin-usb.c @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Tenart + * Jisheng Zhang + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_PHY_PLL 0x04 +#define USB_PHY_PLL_CONTROL 0x08 +#define USB_PHY_TX_CTRL0 0x10 +#define USB_PHY_TX_CTRL1 0x14 +#define USB_PHY_TX_CTRL2 0x18 +#define USB_PHY_RX_CTRL 0x20 +#define USB_PHY_ANALOG 0x34 + +/* USB_PHY_PLL */ +#define CLK_REF_DIV(x) ((x) << 4) +#define FEEDBACK_CLK_DIV(x) ((x) << 8) + +/* USB_PHY_PLL_CONTROL */ +#define CLK_STABLE BIT(0) +#define PLL_CTRL_PIN BIT(1) +#define PLL_CTRL_REG BIT(2) +#define PLL_ON BIT(3) +#define PHASE_OFF_TOL_125 (0x0 << 5) +#define PHASE_OFF_TOL_250 BIT(5) +#define KVC0_CALIB (0x0 << 9) +#define KVC0_REG_CTRL BIT(9) +#define KVC0_HIGH (0x0 << 10) +#define KVC0_LOW (0x3 << 10) +#define CLK_BLK_EN BIT(13) + +/* USB_PHY_TX_CTRL0 */ +#define EXT_HS_RCAL_EN BIT(3) +#define EXT_FS_RCAL_EN BIT(4) +#define IMPCAL_VTH_DIV(x) ((x) << 5) +#define EXT_RS_RCAL_DIV(x) ((x) << 8) +#define EXT_FS_RCAL_DIV(x) ((x) << 12) + +/* USB_PHY_TX_CTRL1 */ +#define TX_VDD15_14 (0x0 << 4) +#define TX_VDD15_15 BIT(4) +#define TX_VDD15_16 (0x2 << 4) +#define TX_VDD15_17 (0x3 << 4) +#define TX_VDD12_VDD (0x0 << 6) +#define TX_VDD12_11 BIT(6) +#define TX_VDD12_12 (0x2 << 6) +#define TX_VDD12_13 (0x3 << 6) +#define LOW_VDD_EN BIT(8) +#define TX_OUT_AMP(x) ((x) << 9) + +/* USB_PHY_TX_CTRL2 */ +#define TX_CHAN_CTRL_REG(x) ((x) << 0) +#define DRV_SLEWRATE(x) ((x) << 4) +#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6) +#define IMP_CAL_FS_HS_DLY_1 BIT(6) +#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6) +#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6) +#define FS_DRV_EN_MASK(x) ((x) << 8) +#define HS_DRV_EN_MASK(x) ((x) << 12) + +/* USB_PHY_RX_CTRL */ +#define PHASE_FREEZE_DLY_2_CL (0x0 << 0) +#define PHASE_FREEZE_DLY_4_CL BIT(0) +#define ACK_LENGTH_8_CL (0x0 << 2) +#define ACK_LENGTH_12_CL BIT(2) +#define ACK_LENGTH_16_CL (0x2 << 2) +#define ACK_LENGTH_20_CL (0x3 << 2) +#define SQ_LENGTH_3 (0x0 << 4) +#define SQ_LENGTH_6 BIT(4) +#define SQ_LENGTH_9 (0x2 << 4) +#define SQ_LENGTH_12 (0x3 << 4) +#define DISCON_THRESHOLD_260 (0x0 << 6) +#define DISCON_THRESHOLD_270 BIT(6) +#define DISCON_THRESHOLD_280 (0x2 << 6) +#define DISCON_THRESHOLD_290 (0x3 << 6) +#define SQ_THRESHOLD(x) ((x) << 8) +#define LPF_COEF(x) ((x) << 12) +#define INTPL_CUR_10 (0x0 << 14) +#define INTPL_CUR_20 BIT(14) +#define INTPL_CUR_30 (0x2 << 14) +#define INTPL_CUR_40 (0x3 << 14) + +/* USB_PHY_ANALOG */ +#define ANA_PWR_UP BIT(1) +#define ANA_PWR_DOWN BIT(2) +#define V2I_VCO_RATIO(x) ((x) << 7) +#define R_ROTATE_90 (0x0 << 10) +#define R_ROTATE_0 BIT(10) +#define MODE_TEST_EN BIT(11) +#define ANA_TEST_DC_CTRL(x) ((x) << 12) + +static const u32 phy_berlin_pll_dividers[] = { + /* Berlin 2 */ + CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54), + /* Berlin 2CD/Q */ + CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54), +}; + +struct phy_berlin_usb_priv { + void __iomem *base; + struct reset_control *rst_ctrl; + u32 pll_divider; +}; + +static int phy_berlin_usb_power_on(struct phy *phy) +{ + struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy); + + reset_control_reset(priv->rst_ctrl); + + writel(priv->pll_divider, + priv->base + USB_PHY_PLL); + writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL | + CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL); + writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5), + priv->base + USB_PHY_ANALOG); + writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 | + DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) | + INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL); + + writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1); + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4), + priv->base + USB_PHY_TX_CTRL0); + + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) | + EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0); + + writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4), + priv->base + USB_PHY_TX_CTRL0); + writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 | + FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2); + + return 0; +} + +static struct phy_ops phy_berlin_usb_ops = { + .power_on = phy_berlin_usb_power_on, + .owner = THIS_MODULE, +}; + +static const struct of_device_id phy_berlin_sata_of_match[] = { + { + .compatible = "marvell,berlin2-usb-phy", + .data = &phy_berlin_pll_dividers[0], + }, + { + .compatible = "marvell,berlin2cd-usb-phy", + .data = &phy_berlin_pll_dividers[1], + }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match); + +static int phy_berlin_usb_probe(struct platform_device *pdev) +{ + const struct of_device_id *match = + of_match_device(phy_berlin_sata_of_match, &pdev->dev); + struct phy_berlin_usb_priv *priv; + struct resource *res; + struct phy *phy; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL); + if (IS_ERR(priv->rst_ctrl)) + return PTR_ERR(priv->rst_ctrl); + + priv->pll_divider = *((u32 *)match->data); + + phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops); + if (IS_ERR(phy)) { + dev_err(&pdev->dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + platform_set_drvdata(pdev, priv); + phy_set_drvdata(phy, priv); + + phy_provider = + devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver phy_berlin_usb_driver = { + .probe = phy_berlin_usb_probe, + .driver = { + .name = "phy-berlin-usb", + .owner = THIS_MODULE, + .of_match_table = phy_berlin_sata_of_match, + }, +}; +module_platform_driver(phy_berlin_usb_driver); + +MODULE_AUTHOR("Antoine Tenart "); +MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c new file mode 100644 index 000000000..63bc12d7a --- /dev/null +++ b/drivers/phy/phy-core.c @@ -0,0 +1,906 @@ +/* + * phy-core.c -- Generic Phy framework. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Kishon Vijay Abraham I + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct class *phy_class; +static DEFINE_MUTEX(phy_provider_mutex); +static LIST_HEAD(phy_provider_list); +static LIST_HEAD(phys); +static DEFINE_IDA(phy_ida); + +static void devm_phy_release(struct device *dev, void *res) +{ + struct phy *phy = *(struct phy **)res; + + phy_put(phy); +} + +static void devm_phy_provider_release(struct device *dev, void *res) +{ + struct phy_provider *phy_provider = *(struct phy_provider **)res; + + of_phy_provider_unregister(phy_provider); +} + +static void devm_phy_consume(struct device *dev, void *res) +{ + struct phy *phy = *(struct phy **)res; + + phy_destroy(phy); +} + +static int devm_phy_match(struct device *dev, void *res, void *match_data) +{ + struct phy **phy = res; + + return *phy == match_data; +} + +/** + * phy_create_lookup() - allocate and register PHY/device association + * @phy: the phy of the association + * @con_id: connection ID string on device + * @dev_id: the device of the association + * + * Creates and registers phy_lookup entry. + */ +int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id) +{ + struct phy_lookup *pl; + + if (!phy || !dev_id || !con_id) + return -EINVAL; + + pl = kzalloc(sizeof(*pl), GFP_KERNEL); + if (!pl) + return -ENOMEM; + + pl->dev_id = dev_id; + pl->con_id = con_id; + pl->phy = phy; + + mutex_lock(&phy_provider_mutex); + list_add_tail(&pl->node, &phys); + mutex_unlock(&phy_provider_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(phy_create_lookup); + +/** + * phy_remove_lookup() - find and remove PHY/device association + * @phy: the phy of the association + * @con_id: connection ID string on device + * @dev_id: the device of the association + * + * Finds and unregisters phy_lookup entry that was created with + * phy_create_lookup(). + */ +void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id) +{ + struct phy_lookup *pl; + + if (!phy || !dev_id || !con_id) + return; + + mutex_lock(&phy_provider_mutex); + list_for_each_entry(pl, &phys, node) + if (pl->phy == phy && !strcmp(pl->dev_id, dev_id) && + !strcmp(pl->con_id, con_id)) { + list_del(&pl->node); + kfree(pl); + break; + } + mutex_unlock(&phy_provider_mutex); +} +EXPORT_SYMBOL_GPL(phy_remove_lookup); + +static struct phy *phy_find(struct device *dev, const char *con_id) +{ + const char *dev_id = dev_name(dev); + struct phy_lookup *p, *pl = NULL; + + mutex_lock(&phy_provider_mutex); + list_for_each_entry(p, &phys, node) + if (!strcmp(p->dev_id, dev_id) && !strcmp(p->con_id, con_id)) { + pl = p; + break; + } + mutex_unlock(&phy_provider_mutex); + + return pl ? pl->phy : ERR_PTR(-ENODEV); +} + +static struct phy_provider *of_phy_provider_lookup(struct device_node *node) +{ + struct phy_provider *phy_provider; + struct device_node *child; + + list_for_each_entry(phy_provider, &phy_provider_list, list) { + if (phy_provider->dev->of_node == node) + return phy_provider; + + for_each_child_of_node(phy_provider->dev->of_node, child) + if (child == node) + return phy_provider; + } + + return ERR_PTR(-EPROBE_DEFER); +} + +int phy_pm_runtime_get(struct phy *phy) +{ + int ret; + + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + ret = pm_runtime_get(&phy->dev); + if (ret < 0 && ret != -EINPROGRESS) + pm_runtime_put_noidle(&phy->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_get); + +int phy_pm_runtime_get_sync(struct phy *phy) +{ + int ret; + + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + ret = pm_runtime_get_sync(&phy->dev); + if (ret < 0) + pm_runtime_put_sync(&phy->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_get_sync); + +int phy_pm_runtime_put(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + return pm_runtime_put(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_put); + +int phy_pm_runtime_put_sync(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return -ENOTSUPP; + + return pm_runtime_put_sync(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_put_sync); + +void phy_pm_runtime_allow(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return; + + pm_runtime_allow(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_allow); + +void phy_pm_runtime_forbid(struct phy *phy) +{ + if (!pm_runtime_enabled(&phy->dev)) + return; + + pm_runtime_forbid(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_pm_runtime_forbid); + +int phy_init(struct phy *phy) +{ + int ret; + + if (!phy) + return 0; + + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + ret = 0; /* Override possible ret == -ENOTSUPP */ + + mutex_lock(&phy->mutex); + if (phy->init_count == 0 && phy->ops->init) { + ret = phy->ops->init(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy init failed --> %d\n", ret); + goto out; + } + } + ++phy->init_count; + +out: + mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + return ret; +} +EXPORT_SYMBOL_GPL(phy_init); + +int phy_exit(struct phy *phy) +{ + int ret; + + if (!phy) + return 0; + + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + ret = 0; /* Override possible ret == -ENOTSUPP */ + + mutex_lock(&phy->mutex); + if (phy->init_count == 1 && phy->ops->exit) { + ret = phy->ops->exit(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy exit failed --> %d\n", ret); + goto out; + } + } + --phy->init_count; + +out: + mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + return ret; +} +EXPORT_SYMBOL_GPL(phy_exit); + +int phy_power_on(struct phy *phy) +{ + int ret; + + if (!phy) + return 0; + + if (phy->pwr) { + ret = regulator_enable(phy->pwr); + if (ret) + return ret; + } + + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + ret = 0; /* Override possible ret == -ENOTSUPP */ + + mutex_lock(&phy->mutex); + if (phy->power_count == 0 && phy->ops->power_on) { + ret = phy->ops->power_on(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy poweron failed --> %d\n", ret); + goto out; + } + } + ++phy->power_count; + mutex_unlock(&phy->mutex); + return 0; + +out: + mutex_unlock(&phy->mutex); + phy_pm_runtime_put_sync(phy); + if (phy->pwr) + regulator_disable(phy->pwr); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_power_on); + +int phy_power_off(struct phy *phy) +{ + int ret; + + if (!phy) + return 0; + + mutex_lock(&phy->mutex); + if (phy->power_count == 1 && phy->ops->power_off) { + ret = phy->ops->power_off(phy); + if (ret < 0) { + dev_err(&phy->dev, "phy poweroff failed --> %d\n", ret); + mutex_unlock(&phy->mutex); + return ret; + } + } + --phy->power_count; + mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + + if (phy->pwr) + regulator_disable(phy->pwr); + + return 0; +} +EXPORT_SYMBOL_GPL(phy_power_off); + +/** + * _of_phy_get() - lookup and obtain a reference to a phy by phandle + * @np: device_node for which to get the phy + * @index: the index of the phy + * + * Returns the phy associated with the given phandle value, + * after getting a refcount to it or -ENODEV if there is no such phy or + * -EPROBE_DEFER if there is a phandle to the phy, but the device is + * not yet loaded. This function uses of_xlate call back function provided + * while registering the phy_provider to find the phy instance. + */ +static struct phy *_of_phy_get(struct device_node *np, int index) +{ + int ret; + struct phy_provider *phy_provider; + struct phy *phy = NULL; + struct of_phandle_args args; + + ret = of_parse_phandle_with_args(np, "phys", "#phy-cells", + index, &args); + if (ret) + return ERR_PTR(-ENODEV); + + mutex_lock(&phy_provider_mutex); + phy_provider = of_phy_provider_lookup(args.np); + if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) { + phy = ERR_PTR(-EPROBE_DEFER); + goto err0; + } + + phy = phy_provider->of_xlate(phy_provider->dev, &args); + module_put(phy_provider->owner); + +err0: + mutex_unlock(&phy_provider_mutex); + of_node_put(args.np); + + return phy; +} + +/** + * of_phy_get() - lookup and obtain a reference to a phy using a device_node. + * @np: device_node for which to get the phy + * @con_id: name of the phy from device's point of view + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *of_phy_get(struct device_node *np, const char *con_id) +{ + struct phy *phy = NULL; + int index = 0; + + if (con_id) + index = of_property_match_string(np, "phy-names", con_id); + + phy = _of_phy_get(np, index); + if (IS_ERR(phy)) + return phy; + + if (!try_module_get(phy->ops->owner)) + return ERR_PTR(-EPROBE_DEFER); + + get_device(&phy->dev); + + return phy; +} +EXPORT_SYMBOL_GPL(of_phy_get); + +/** + * phy_put() - release the PHY + * @phy: the phy returned by phy_get() + * + * Releases a refcount the caller received from phy_get(). + */ +void phy_put(struct phy *phy) +{ + if (!phy || IS_ERR(phy)) + return; + + module_put(phy->ops->owner); + put_device(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_put); + +/** + * devm_phy_put() - release the PHY + * @dev: device that wants to release this phy + * @phy: the phy returned by devm_phy_get() + * + * destroys the devres associated with this phy and invokes phy_put + * to release the phy. + */ +void devm_phy_put(struct device *dev, struct phy *phy) +{ + int r; + + if (!phy) + return; + + r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy); + dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); +} +EXPORT_SYMBOL_GPL(devm_phy_put); + +/** + * of_phy_simple_xlate() - returns the phy instance from phy provider + * @dev: the PHY provider device + * @args: of_phandle_args (not used here) + * + * Intended to be used by phy provider for the common case where #phy-cells is + * 0. For other cases where #phy-cells is greater than '0', the phy provider + * should provide a custom of_xlate function that reads the *args* and returns + * the appropriate phy. + */ +struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args + *args) +{ + struct phy *phy; + struct class_dev_iter iter; + + class_dev_iter_init(&iter, phy_class, NULL, NULL); + while ((dev = class_dev_iter_next(&iter))) { + phy = to_phy(dev); + if (args->np != phy->dev.of_node) + continue; + + class_dev_iter_exit(&iter); + return phy; + } + + class_dev_iter_exit(&iter); + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(of_phy_simple_xlate); + +/** + * phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or the name of the controller + * port for non-dt case + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *phy_get(struct device *dev, const char *string) +{ + int index = 0; + struct phy *phy; + + if (string == NULL) { + dev_WARN(dev, "missing string\n"); + return ERR_PTR(-EINVAL); + } + + if (dev->of_node) { + index = of_property_match_string(dev->of_node, "phy-names", + string); + phy = _of_phy_get(dev->of_node, index); + } else { + phy = phy_find(dev, string); + } + if (IS_ERR(phy)) + return phy; + + if (!try_module_get(phy->ops->owner)) + return ERR_PTR(-EPROBE_DEFER); + + get_device(&phy->dev); + + return phy; +} +EXPORT_SYMBOL_GPL(phy_get); + +/** + * phy_optional_get() - lookup and obtain a reference to an optional phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or the name of the controller + * port for non-dt case + * + * Returns the phy driver, after getting a refcount to it; or + * NULL if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *phy_optional_get(struct device *dev, const char *string) +{ + struct phy *phy = phy_get(dev, string); + + if (IS_ERR(phy) && (PTR_ERR(phy) == -ENODEV)) + phy = NULL; + + return phy; +} +EXPORT_SYMBOL_GPL(phy_optional_get); + +/** + * devm_phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or phy device name + * for non-dt case + * + * Gets the phy using phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_phy_get(struct device *dev, const char *string) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = phy_get(dev, string); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_phy_get); + +/** + * devm_phy_optional_get() - lookup and obtain a reference to an optional phy. + * @dev: device that requests this phy + * @string: the phy name as given in the dt data or phy device name + * for non-dt case + * + * Gets the phy using phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres + * data, then, devres data is freed. This differs to devm_phy_get() in + * that if the phy does not exist, it is not considered an error and + * -ENODEV will not be returned. Instead the NULL phy is returned, + * which can be passed to all other phy consumer calls. + */ +struct phy *devm_phy_optional_get(struct device *dev, const char *string) +{ + struct phy *phy = devm_phy_get(dev, string); + + if (IS_ERR(phy) && (PTR_ERR(phy) == -ENODEV)) + phy = NULL; + + return phy; +} +EXPORT_SYMBOL_GPL(devm_phy_optional_get); + +/** + * devm_of_phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @np: node containing the phy + * @con_id: name of the phy from device's point of view + * + * Gets the phy using of_phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, + const char *con_id) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = of_phy_get(np, con_id); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_of_phy_get); + +/** + * phy_create() - create a new phy + * @dev: device that is creating the new phy + * @node: device node of the phy + * @ops: function pointers for performing phy operations + * + * Called to create a phy using phy framework. + */ +struct phy *phy_create(struct device *dev, struct device_node *node, + const struct phy_ops *ops) +{ + int ret; + int id; + struct phy *phy; + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) + return ERR_PTR(-ENOMEM); + + id = ida_simple_get(&phy_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + dev_err(dev, "unable to get id\n"); + ret = id; + goto free_phy; + } + + /* phy-supply */ + phy->pwr = regulator_get_optional(dev, "phy"); + if (IS_ERR(phy->pwr)) { + if (PTR_ERR(phy->pwr) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto free_ida; + } + phy->pwr = NULL; + } + + device_initialize(&phy->dev); + mutex_init(&phy->mutex); + + phy->dev.class = phy_class; + phy->dev.parent = dev; + phy->dev.of_node = node ?: dev->of_node; + phy->id = id; + phy->ops = ops; + + ret = dev_set_name(&phy->dev, "phy-%s.%d", dev_name(dev), id); + if (ret) + goto put_dev; + + ret = device_add(&phy->dev); + if (ret) + goto put_dev; + + if (pm_runtime_enabled(dev)) { + pm_runtime_enable(&phy->dev); + pm_runtime_no_callbacks(&phy->dev); + } + + return phy; + +put_dev: + put_device(&phy->dev); /* calls phy_release() which frees resources */ + return ERR_PTR(ret); + +free_ida: + ida_simple_remove(&phy_ida, phy->id); + +free_phy: + kfree(phy); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(phy_create); + +/** + * devm_phy_create() - create a new phy + * @dev: device that is creating the new phy + * @node: device node of the phy + * @ops: function pointers for performing phy operations + * + * Creates a new PHY device adding it to the PHY class. + * While at that, it also associates the device with the phy using devres. + * On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_phy_create(struct device *dev, struct device_node *node, + const struct phy_ops *ops) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_consume, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = phy_create(dev, node, ops); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_phy_create); + +/** + * phy_destroy() - destroy the phy + * @phy: the phy to be destroyed + * + * Called to destroy the phy. + */ +void phy_destroy(struct phy *phy) +{ + pm_runtime_disable(&phy->dev); + device_unregister(&phy->dev); +} +EXPORT_SYMBOL_GPL(phy_destroy); + +/** + * devm_phy_destroy() - destroy the PHY + * @dev: device that wants to release this phy + * @phy: the phy returned by devm_phy_get() + * + * destroys the devres associated with this phy and invokes phy_destroy + * to destroy the phy. + */ +void devm_phy_destroy(struct device *dev, struct phy *phy) +{ + int r; + + r = devres_destroy(dev, devm_phy_consume, devm_phy_match, phy); + dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n"); +} +EXPORT_SYMBOL_GPL(devm_phy_destroy); + +/** + * __of_phy_provider_register() - create/register phy provider with the framework + * @dev: struct device of the phy provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain phy instance from phy provider + * + * Creates struct phy_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the phy instance from + * phy provider. + */ +struct phy_provider *__of_phy_provider_register(struct device *dev, + struct module *owner, struct phy * (*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct phy_provider *phy_provider; + + phy_provider = kzalloc(sizeof(*phy_provider), GFP_KERNEL); + if (!phy_provider) + return ERR_PTR(-ENOMEM); + + phy_provider->dev = dev; + phy_provider->owner = owner; + phy_provider->of_xlate = of_xlate; + + mutex_lock(&phy_provider_mutex); + list_add_tail(&phy_provider->list, &phy_provider_list); + mutex_unlock(&phy_provider_mutex); + + return phy_provider; +} +EXPORT_SYMBOL_GPL(__of_phy_provider_register); + +/** + * __devm_of_phy_provider_register() - create/register phy provider with the + * framework + * @dev: struct device of the phy provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain phy instance from phy provider + * + * Creates struct phy_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the phy instance from + * phy provider. While at that, it also associates the device with the + * phy provider using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + */ +struct phy_provider *__devm_of_phy_provider_register(struct device *dev, + struct module *owner, struct phy * (*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct phy_provider **ptr, *phy_provider; + + ptr = devres_alloc(devm_phy_provider_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy_provider = __of_phy_provider_register(dev, owner, of_xlate); + if (!IS_ERR(phy_provider)) { + *ptr = phy_provider; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy_provider; +} +EXPORT_SYMBOL_GPL(__devm_of_phy_provider_register); + +/** + * of_phy_provider_unregister() - unregister phy provider from the framework + * @phy_provider: phy provider returned by of_phy_provider_register() + * + * Removes the phy_provider created using of_phy_provider_register(). + */ +void of_phy_provider_unregister(struct phy_provider *phy_provider) +{ + if (IS_ERR(phy_provider)) + return; + + mutex_lock(&phy_provider_mutex); + list_del(&phy_provider->list); + kfree(phy_provider); + mutex_unlock(&phy_provider_mutex); +} +EXPORT_SYMBOL_GPL(of_phy_provider_unregister); + +/** + * devm_of_phy_provider_unregister() - remove phy provider from the framework + * @dev: struct device of the phy provider + * + * destroys the devres associated with this phy provider and invokes + * of_phy_provider_unregister to unregister the phy provider. + */ +void devm_of_phy_provider_unregister(struct device *dev, + struct phy_provider *phy_provider) { + int r; + + r = devres_destroy(dev, devm_phy_provider_release, devm_phy_match, + phy_provider); + dev_WARN_ONCE(dev, r, "couldn't find PHY provider device resource\n"); +} +EXPORT_SYMBOL_GPL(devm_of_phy_provider_unregister); + +/** + * phy_release() - release the phy + * @dev: the dev member within phy + * + * When the last reference to the device is removed, it is called + * from the embedded kobject as release method. + */ +static void phy_release(struct device *dev) +{ + struct phy *phy; + + phy = to_phy(dev); + dev_vdbg(dev, "releasing '%s'\n", dev_name(dev)); + regulator_put(phy->pwr); + ida_simple_remove(&phy_ida, phy->id); + kfree(phy); +} + +static int __init phy_core_init(void) +{ + phy_class = class_create(THIS_MODULE, "phy"); + if (IS_ERR(phy_class)) { + pr_err("failed to create phy class --> %ld\n", + PTR_ERR(phy_class)); + return PTR_ERR(phy_class); + } + + phy_class->dev_release = phy_release; + + return 0; +} +module_init(phy_core_init); + +static void __exit phy_core_exit(void) +{ + class_destroy(phy_class); +} +module_exit(phy_core_exit); + +MODULE_DESCRIPTION("Generic PHY Framework"); +MODULE_AUTHOR("Kishon Vijay Abraham I "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/phy-dm816x-usb.c new file mode 100644 index 000000000..7b42555dd --- /dev/null +++ b/drivers/phy/phy-dm816x-usb.c @@ -0,0 +1,290 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * TRM has two sets of USB_CTRL registers.. The correct register bits + * are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the + * phy as being SR70LX Synopsys USB 2.0 OTG nanoPHY. It also seems at + * least dm816x rev c ignores writes to USB_CTRL register, but the TI + * kernel is writing to those so it's possible that later revisions + * have worknig USB_CTRL register. + * + * Also note that At least USB_CTRL register seems to be dm816x specific + * according to the TRM. It's possible that USBPHY_CTRL is more generic, + * but that would have to be checked against the SR70LX documentation + * which does not seem to be publicly available. + * + * Finally, the phy on dm814x and am335x is different from dm816x. + */ +#define DM816X_USB_CTRL_PHYCLKSRC BIT(8) /* 1 = PLL ref clock */ +#define DM816X_USB_CTRL_PHYSLEEP1 BIT(1) /* Enable the first phy */ +#define DM816X_USB_CTRL_PHYSLEEP0 BIT(0) /* Enable the second phy */ + +#define DM816X_USBPHY_CTRL_TXRISETUNE 1 +#define DM816X_USBPHY_CTRL_TXVREFTUNE 0xc +#define DM816X_USBPHY_CTRL_TXPREEMTUNE 0x2 + +struct dm816x_usb_phy { + struct regmap *syscon; + struct device *dev; + unsigned int instance; + struct clk *refclk; + struct usb_phy phy; + unsigned int usb_ctrl; /* Shared between phy0 and phy1 */ + unsigned int usbphy_ctrl; +}; + +static int dm816x_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + otg->host = host; + if (!host) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int dm816x_usb_phy_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + otg->gadget = gadget; + if (!gadget) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int dm816x_usb_phy_init(struct phy *x) +{ + struct dm816x_usb_phy *phy = phy_get_drvdata(x); + unsigned int val; + int error; + + if (clk_get_rate(phy->refclk) != 24000000) + dev_warn(phy->dev, "nonstandard phy refclk\n"); + + /* Set PLL ref clock and put phys to sleep */ + error = regmap_update_bits(phy->syscon, phy->usb_ctrl, + DM816X_USB_CTRL_PHYCLKSRC | + DM816X_USB_CTRL_PHYSLEEP1 | + DM816X_USB_CTRL_PHYSLEEP0, + 0); + regmap_read(phy->syscon, phy->usb_ctrl, &val); + if ((val & 3) != 0) + dev_info(phy->dev, + "Working dm816x USB_CTRL! (0x%08x)\n", + val); + + /* + * TI kernel sets these values for "symmetrical eye diagram and + * better signal quality" so let's assume somebody checked the + * values with a scope and set them here too. + */ + regmap_read(phy->syscon, phy->usbphy_ctrl, &val); + val |= DM816X_USBPHY_CTRL_TXRISETUNE | + DM816X_USBPHY_CTRL_TXVREFTUNE | + DM816X_USBPHY_CTRL_TXPREEMTUNE; + regmap_write(phy->syscon, phy->usbphy_ctrl, val); + + return 0; +} + +static struct phy_ops ops = { + .init = dm816x_usb_phy_init, + .owner = THIS_MODULE, +}; + +static int dm816x_usb_phy_runtime_suspend(struct device *dev) +{ + struct dm816x_usb_phy *phy = dev_get_drvdata(dev); + unsigned int mask, val; + int error = 0; + + mask = BIT(phy->instance); + val = ~BIT(phy->instance); + error = regmap_update_bits(phy->syscon, phy->usb_ctrl, + mask, val); + if (error) + dev_err(phy->dev, "phy%i failed to power off\n", + phy->instance); + clk_disable(phy->refclk); + + return 0; +} + +static int dm816x_usb_phy_runtime_resume(struct device *dev) +{ + struct dm816x_usb_phy *phy = dev_get_drvdata(dev); + unsigned int mask, val; + int error; + + error = clk_enable(phy->refclk); + if (error) + return error; + + /* + * Note that at least dm816x rev c does not seem to do + * anything with the USB_CTRL register. But let's follow + * what the TI tree is doing in case later revisions use + * USB_CTRL. + */ + mask = BIT(phy->instance); + val = BIT(phy->instance); + error = regmap_update_bits(phy->syscon, phy->usb_ctrl, + mask, val); + if (error) { + dev_err(phy->dev, "phy%i failed to power on\n", + phy->instance); + clk_disable(phy->refclk); + return error; + } + + return 0; +} + +static UNIVERSAL_DEV_PM_OPS(dm816x_usb_phy_pm_ops, + dm816x_usb_phy_runtime_suspend, + dm816x_usb_phy_runtime_resume, + NULL); + +#ifdef CONFIG_OF +static const struct of_device_id dm816x_usb_phy_id_table[] = { + { + .compatible = "ti,dm8168-usb-phy", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, dm816x_usb_phy_id_table); +#endif + +static int dm816x_usb_phy_probe(struct platform_device *pdev) +{ + struct dm816x_usb_phy *phy; + struct resource *res; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct usb_otg *otg; + const struct of_device_id *of_id; + const struct usb_phy_data *phy_data; + int error; + + of_id = of_match_device(of_match_ptr(dm816x_usb_phy_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + phy->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "syscon"); + if (IS_ERR(phy->syscon)) + return PTR_ERR(phy->syscon); + + /* + * According to sprs614e.pdf, the first usb_ctrl is shared and + * the second instance for usb_ctrl is reserved.. Also the + * register bits are different from earlier TRMs. + */ + phy->usb_ctrl = 0x20; + phy->usbphy_ctrl = (res->start & 0xff) + 4; + if (phy->usbphy_ctrl == 0x2c) + phy->instance = 1; + + phy_data = of_id->data; + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + phy->dev = &pdev->dev; + phy->phy.dev = phy->dev; + phy->phy.label = "dm8168_usb_phy"; + phy->phy.otg = otg; + phy->phy.type = USB_PHY_TYPE_USB2; + otg->set_host = dm816x_usb_phy_set_host; + otg->set_peripheral = dm816x_usb_phy_set_peripheral; + otg->usb_phy = &phy->phy; + + platform_set_drvdata(pdev, phy); + + phy->refclk = devm_clk_get(phy->dev, "refclk"); + if (IS_ERR(phy->refclk)) + return PTR_ERR(phy->refclk); + error = clk_prepare(phy->refclk); + if (error) + return error; + + pm_runtime_enable(phy->dev); + generic_phy = devm_phy_create(phy->dev, NULL, &ops); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + usb_add_phy_dev(&phy->phy); + + return 0; +} + +static int dm816x_usb_phy_remove(struct platform_device *pdev) +{ + struct dm816x_usb_phy *phy = platform_get_drvdata(pdev); + + usb_remove_phy(&phy->phy); + pm_runtime_disable(phy->dev); + clk_unprepare(phy->refclk); + + return 0; +} + +static struct platform_driver dm816x_usb_phy_driver = { + .probe = dm816x_usb_phy_probe, + .remove = dm816x_usb_phy_remove, + .driver = { + .name = "dm816x-usb-phy", + .pm = &dm816x_usb_phy_pm_ops, + .of_match_table = of_match_ptr(dm816x_usb_phy_id_table), + }, +}; + +module_platform_driver(dm816x_usb_phy_driver); + +MODULE_ALIAS("platform:dm816x_usb"); +MODULE_AUTHOR("Tony Lindgren "); +MODULE_DESCRIPTION("dm816x usb phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c new file mode 100644 index 000000000..179cbf945 --- /dev/null +++ b/drivers/phy/phy-exynos-dp-video.c @@ -0,0 +1,122 @@ +/* + * Samsung EXYNOS SoC series Display Port PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jingoo Han + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct exynos_dp_video_phy_drvdata { + u32 phy_ctrl_offset; +}; + +struct exynos_dp_video_phy { + struct regmap *regs; + const struct exynos_dp_video_phy_drvdata *drvdata; +}; + +static int exynos_dp_video_phy_power_on(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + /* Disable power isolation on DP-PHY */ + return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS5_PHY_ENABLE, EXYNOS5_PHY_ENABLE); +} + +static int exynos_dp_video_phy_power_off(struct phy *phy) +{ + struct exynos_dp_video_phy *state = phy_get_drvdata(phy); + + /* Enable power isolation on DP-PHY */ + return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS5_PHY_ENABLE, 0); +} + +static struct phy_ops exynos_dp_video_phy_ops = { + .power_on = exynos_dp_video_phy_power_on, + .power_off = exynos_dp_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, +}; + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-dp-video-phy", + .data = &exynos5250_dp_video_phy, + }, { + .compatible = "samsung,exynos5420-dp-video-phy", + .data = &exynos5420_dp_video_phy, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + +static int exynos_dp_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_dp_video_phy *state; + struct device *dev = &pdev->dev; + const struct of_device_id *match; + struct phy_provider *phy_provider; + struct phy *phy; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(state->regs)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(state->regs); + } + + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node); + state->drvdata = match->data; + + phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Display Port PHY\n"); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, state); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver exynos_dp_video_phy_driver = { + .probe = exynos_dp_video_phy_probe, + .driver = { + .name = "exynos-dp-video-phy", + .of_match_table = exynos_dp_video_phy_of_match, + } +}; +module_platform_driver(exynos_dp_video_phy_driver); + +MODULE_AUTHOR("Jingoo Han "); +MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c new file mode 100644 index 000000000..df7519a39 --- /dev/null +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -0,0 +1,196 @@ +/* + * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* MIPI_PHYn_CONTROL reg. offset (for base address from ioremap): n = 0..1 */ +#define EXYNOS_MIPI_PHY_CONTROL(n) ((n) * 4) + +enum exynos_mipi_phy_id { + EXYNOS_MIPI_PHY_ID_CSIS0, + EXYNOS_MIPI_PHY_ID_DSIM0, + EXYNOS_MIPI_PHY_ID_CSIS1, + EXYNOS_MIPI_PHY_ID_DSIM1, + EXYNOS_MIPI_PHYS_NUM +}; + +#define is_mipi_dsim_phy_id(id) \ + ((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM1) + +struct exynos_mipi_video_phy { + struct video_phy_desc { + struct phy *phy; + unsigned int index; + } phys[EXYNOS_MIPI_PHYS_NUM]; + spinlock_t slock; + void __iomem *regs; + struct regmap *regmap; +}; + +static int __set_phy_state(struct exynos_mipi_video_phy *state, + enum exynos_mipi_phy_id id, unsigned int on) +{ + const unsigned int offset = EXYNOS4_MIPI_PHY_CONTROL(id / 2); + void __iomem *addr; + u32 val, reset; + + if (is_mipi_dsim_phy_id(id)) + reset = EXYNOS4_MIPI_PHY_MRESETN; + else + reset = EXYNOS4_MIPI_PHY_SRESETN; + + spin_lock(&state->slock); + + if (!IS_ERR(state->regmap)) { + regmap_read(state->regmap, offset, &val); + if (on) + val |= reset; + else + val &= ~reset; + regmap_write(state->regmap, offset, val); + if (on) + val |= EXYNOS4_MIPI_PHY_ENABLE; + else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK)) + val &= ~EXYNOS4_MIPI_PHY_ENABLE; + regmap_write(state->regmap, offset, val); + } else { + addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2); + + val = readl(addr); + if (on) + val |= reset; + else + val &= ~reset; + writel(val, addr); + /* Clear ENABLE bit only if MRESETN, SRESETN bits are not set */ + if (on) + val |= EXYNOS4_MIPI_PHY_ENABLE; + else if (!(val & EXYNOS4_MIPI_PHY_RESET_MASK)) + val &= ~EXYNOS4_MIPI_PHY_ENABLE; + + writel(val, addr); + } + + spin_unlock(&state->slock); + return 0; +} + +#define to_mipi_video_phy(desc) \ + container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index]); + +static int exynos_mipi_video_phy_power_on(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(state, phy_desc->index, 1); +} + +static int exynos_mipi_video_phy_power_off(struct phy *phy) +{ + struct video_phy_desc *phy_desc = phy_get_drvdata(phy); + struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc); + + return __set_phy_state(state, phy_desc->index, 0); +} + +static struct phy *exynos_mipi_video_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos_mipi_video_phy *state = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= EXYNOS_MIPI_PHYS_NUM)) + return ERR_PTR(-ENODEV); + + return state->phys[args->args[0]].phy; +} + +static struct phy_ops exynos_mipi_video_phy_ops = { + .power_on = exynos_mipi_video_phy_power_on, + .power_off = exynos_mipi_video_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_mipi_video_phy_probe(struct platform_device *pdev) +{ + struct exynos_mipi_video_phy *state; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + unsigned int i; + + state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon"); + if (IS_ERR(state->regmap)) { + struct resource *res; + + dev_info(dev, "regmap lookup failed: %ld\n", + PTR_ERR(state->regmap)); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + state->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(state->regs)) + return PTR_ERR(state->regs); + } + + dev_set_drvdata(dev, state); + spin_lock_init(&state->slock); + + for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, NULL, + &exynos_mipi_video_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + state->phys[i].phy = phy; + state->phys[i].index = i; + phy_set_drvdata(phy, &state->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos_mipi_video_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id exynos_mipi_video_phy_of_match[] = { + { .compatible = "samsung,s5pv210-mipi-video-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match); + +static struct platform_driver exynos_mipi_video_phy_driver = { + .probe = exynos_mipi_video_phy_probe, + .driver = { + .of_match_table = exynos_mipi_video_phy_of_match, + .name = "exynos-mipi-video-phy", + } +}; +module_platform_driver(exynos_mipi_video_phy_driver); + +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/phy-exynos4210-usb2.c new file mode 100644 index 000000000..f30bbb0fb --- /dev/null +++ b/drivers/phy/phy-exynos4210-usb2.c @@ -0,0 +1,260 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4210_UPHYPWR 0x0 + +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4210_UPHYCLK 0x4 + +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define EXYNOS_4210_UPHYRST 0x8 + +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) + +/* USBYPHY1 Floating prevention */ +#define EXYNOS_4210_UPHY1CON 0x34 +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4210_MODE_SWITCH_MASK 1 +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4210_MODE_SWITCH_HOST 1 + +enum exynos4210_phy_id { + EXYNOS4210_DEVICE, + EXYNOS4210_HOST, + EXYNOS4210_HSIC0, + EXYNOS4210_HSIC1, + EXYNOS4210_NUM_PHYS, +}; + +/* + * exynos4210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; + mask = EXYNOS_4210_USB_ISOL_DEVICE; + break; + case EXYNOS4210_HOST: + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_4210_USB_ISOL_HOST; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 clk; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + phypwr = EXYNOS_4210_UPHYPWR_PHY0; + rstbits = EXYNOS_4210_URSTCON_PHY0; + break; + case EXYNOS4210_HOST: + phypwr = EXYNOS_4210_UPHYPWR_PHY1; + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | + EXYNOS_4210_URSTCON_PHY1_P0 | + EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_ALL | + EXYNOS_4210_URSTCON_HOST_LINK_P0; + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); + break; + case EXYNOS4210_HSIC0: + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4210_HSIC1: + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P2; + break; + }; + + if (on) { + clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK); + clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK); + + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + } +} + +static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst) +{ + /* Order of initialisation is important - first power then isolation */ + exynos4210_phy_pwr(inst, 1); + exynos4210_isol(inst, 0); + + return 0; +} + +static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst) +{ + exynos4210_isol(inst, 1); + exynos4210_phy_pwr(inst, 0); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4210_phys[] = { + { + .label = "device", + .id = EXYNOS4210_DEVICE, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "host", + .id = EXYNOS4210_HOST, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4210_HSIC0, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4210_HSIC1, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { + .has_mode_switch = 0, + .num_phys = EXYNOS4210_NUM_PHYS, + .phys = exynos4210_phys, + .rate_to_clk = exynos4210_rate_to_clk, +}; diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/phy-exynos4x12-usb2.c new file mode 100644 index 000000000..765da90a5 --- /dev/null +++ b/drivers/phy/phy-exynos4x12-usb2.c @@ -0,0 +1,378 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4x12_UPHYPWR 0x0 + +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4x12_UPHYCLK 0x4 + +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) + +#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8) + +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) + +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10 +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) + +/* PHY reset control */ +#define EXYNOS_4x12_UPHYRST 0x8 + +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) +/* The following bit defines are presented in the + * order taken from the Exynos4412 reference manual. + * + * During experiments with the hardware and debugging + * it was determined that the hardware behaves contrary + * to the manual. + * + * The following bit values were chaned accordingly to the + * results of real hardware experiments. + */ +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(6) +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(5) +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(10) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(8) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS4x12_DEVICE, + EXYNOS4x12_HOST, + EXYNOS4x12_HSIC0, + EXYNOS4x12_HSIC1, + EXYNOS4x12_NUM_PHYS, +}; + +/* + * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + case EXYNOS4x12_HOST: + offset = EXYNOS_4x12_USB_ISOL_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_OTG; + break; + case EXYNOS4x12_HSIC0: + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC0; + break; + case EXYNOS4x12_HSIC1: + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC1; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 clk; + + clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); + clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; + + if (drv->cfg->has_refclk_sel) + clk = EXYNOS_3250_UPHYCLK_REFCLKSEL; + + clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; + clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON; + writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); +} + +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; + rstbits = EXYNOS_4x12_URSTCON_PHY0; + break; + case EXYNOS4x12_HOST: + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY | + EXYNOS_4x12_URSTCON_PHY1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P0; + break; + case EXYNOS4x12_HSIC0: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; + rstbits = EXYNOS_4x12_URSTCON_HSIC0 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4x12_HSIC1: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + }; + + if (on) { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + } +} + +static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst) +{ + if (inst->int_cnt++ > 0) + return; + + exynos4x12_setup_clk(inst); + exynos4x12_isol(inst, 0); + exynos4x12_phy_pwr(inst, 1); +} + +static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + if (inst->ext_cnt++ > 0) + return 0; + + if (inst->cfg->id == EXYNOS4x12_HOST) { + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_HOST); + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); + } + + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_DEVICE); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 || + inst->cfg->id == EXYNOS4x12_HSIC1) { + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); + exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]); + } + + exynos4x12_power_on_int(inst); + + return 0; +} + +static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst) +{ + if (inst->int_cnt-- > 1) + return; + + exynos4x12_isol(inst, 1); + exynos4x12_phy_pwr(inst, 0); +} + +static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + if (inst->ext_cnt-- > 1) + return 0; + + if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) + regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, + EXYNOS_4x12_MODE_SWITCH_HOST); + + if (inst->cfg->id == EXYNOS4x12_HOST) + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 || + inst->cfg->id == EXYNOS4x12_HSIC1) { + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); + exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]); + } + + exynos4x12_power_off_int(inst); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { + { + .label = "device", + .id = EXYNOS4x12_DEVICE, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "host", + .id = EXYNOS4x12_HOST, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4x12_HSIC0, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4x12_HSIC1, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = { + .has_refclk_sel = 1, + .num_phys = 1, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; + +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS4x12_NUM_PHYS, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c new file mode 100644 index 000000000..d72ef15b0 --- /dev/null +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -0,0 +1,782 @@ +/* + * Samsung EXYNOS5 SoC series USB DRD PHY driver + * + * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series + * + * Copyright (C) 2014 Samsung Electronics Co., Ltd. + * Author: Vivek Gautam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Exynos USB PHY registers */ +#define EXYNOS5_FSEL_9MHZ6 0x0 +#define EXYNOS5_FSEL_10MHZ 0x1 +#define EXYNOS5_FSEL_12MHZ 0x2 +#define EXYNOS5_FSEL_19MHZ2 0x3 +#define EXYNOS5_FSEL_20MHZ 0x4 +#define EXYNOS5_FSEL_24MHZ 0x5 +#define EXYNOS5_FSEL_50MHZ 0x7 + +/* EXYNOS5: USB 3.0 DRD PHY registers */ +#define EXYNOS5_DRD_LINKSYSTEM 0x04 + +#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) +#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) +#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) + +#define EXYNOS5_DRD_PHYUTMI 0x08 + +#define PHYUTMI_OTGDISABLE BIT(6) +#define PHYUTMI_FORCESUSPEND BIT(1) +#define PHYUTMI_FORCESLEEP BIT(0) + +#define EXYNOS5_DRD_PHYPIPE 0x0c + +#define EXYNOS5_DRD_PHYCLKRST 0x10 + +#define PHYCLKRST_EN_UTMISUSPEND BIT(31) + +#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) +#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) + +#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) +#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) + +#define PHYCLKRST_SSC_EN BIT(20) +#define PHYCLKRST_REF_SSP_EN BIT(19) +#define PHYCLKRST_REF_CLKDIV2 BIT(18) + +#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) +#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) + +#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5) +#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8) +#define PHYCLKRST_FSEL(_x) ((_x) << 5) +#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) +#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) +#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) +#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) + +#define PHYCLKRST_RETENABLEN BIT(4) + +#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) +#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) +#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) + +#define PHYCLKRST_PORTRESET BIT(1) +#define PHYCLKRST_COMMONONN BIT(0) + +#define EXYNOS5_DRD_PHYREG0 0x14 +#define EXYNOS5_DRD_PHYREG1 0x18 + +#define EXYNOS5_DRD_PHYPARAM0 0x1c + +#define PHYPARAM0_REF_USE_PAD BIT(31) +#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) +#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) + +#define EXYNOS5_DRD_PHYPARAM1 0x20 + +#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) +#define PHYPARAM1_PCS_TXDEEMPH (0x1c) + +#define EXYNOS5_DRD_PHYTERM 0x24 + +#define EXYNOS5_DRD_PHYTEST 0x28 + +#define PHYTEST_POWERDOWN_SSP BIT(3) +#define PHYTEST_POWERDOWN_HSP BIT(2) + +#define EXYNOS5_DRD_PHYADP 0x2c + +#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30 + +#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2) + +#define EXYNOS5_DRD_PHYRESUME 0x34 +#define EXYNOS5_DRD_LINKPORT 0x44 + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +enum exynos5_usbdrd_phy_id { + EXYNOS5_DRDPHY_UTMI, + EXYNOS5_DRDPHY_PIPE3, + EXYNOS5_DRDPHYS_NUM, +}; + +struct phy_usb_instance; +struct exynos5_usbdrd_phy; + +struct exynos5_usbdrd_phy_config { + u32 id; + void (*phy_isol)(struct phy_usb_instance *inst, u32 on); + void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd); + unsigned int (*set_refclk)(struct phy_usb_instance *inst); +}; + +struct exynos5_usbdrd_phy_drvdata { + const struct exynos5_usbdrd_phy_config *phy_cfg; + u32 pmu_offset_usbdrd0_phy; + u32 pmu_offset_usbdrd1_phy; + bool has_common_clk_gate; +}; + +/** + * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY + * @dev: pointer to device instance of this platform device + * @reg_phy: usb phy controller register memory base + * @clk: phy clock for register access + * @pipeclk: clock for pipe3 phy + * @utmiclk: clock for utmi+ phy + * @itpclk: clock for ITP generation + * @drv_data: pointer to SoC level driver data structure + * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY + * instances each with its 'phy' and 'phy_cfg'. + * @extrefclk: frequency select settings when using 'separate + * reference clocks' for SS and HS operations + * @ref_clk: reference clock to PHY block from which PHY's + * operational clocks are derived + * vbus: VBUS regulator for phy + * vbus_boost: Boost regulator for VBUS present on few Exynos boards + */ +struct exynos5_usbdrd_phy { + struct device *dev; + void __iomem *reg_phy; + struct clk *clk; + struct clk *pipeclk; + struct clk *utmiclk; + struct clk *itpclk; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy_usb_instance { + struct phy *phy; + u32 index; + struct regmap *reg_pmu; + u32 pmu_offset; + const struct exynos5_usbdrd_phy_config *phy_cfg; + } phys[EXYNOS5_DRDPHYS_NUM]; + u32 extrefclk; + struct clk *ref_clk; + struct regulator *vbus; + struct regulator *vbus_boost; +}; + +static inline +struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst) +{ + return container_of((inst), struct exynos5_usbdrd_phy, + phys[(inst)->index]); +} + +/* + * exynos5_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS5_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS5_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS5_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS5_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS5_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS5_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS5_FSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS5_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst, + unsigned int on) +{ + unsigned int val; + + if (!inst->reg_pmu) + return; + + val = on ? 0 : EXYNOS5_PHY_ENABLE; + + regmap_update_bits(inst->reg_pmu, inst->pmu_offset, + EXYNOS5_PHY_ENABLE, val); +} + +/* + * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets multiplier values and spread spectrum + * clock settings for SuperSpeed operations. + */ +static unsigned int +exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst) +{ + static u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Use EXTREFCLK as ref clock */ + reg &= ~PHYCLKRST_REFCLKSEL_MASK; + reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + + /* FSEL settings corresponding to reference clock */ + reg &= ~PHYCLKRST_FSEL_PIPE_MASK | + PHYCLKRST_MPLL_MULTIPLIER_MASK | + PHYCLKRST_SSC_REFCLKSEL_MASK; + switch (phy_drd->extrefclk) { + case EXYNOS5_FSEL_50MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case EXYNOS5_FSEL_24MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + case EXYNOS5_FSEL_20MHZ: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x00)); + break; + case EXYNOS5_FSEL_19MHZ2: + reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF | + PHYCLKRST_SSC_REFCLKSEL(0x88)); + break; + default: + dev_dbg(phy_drd->dev, "unsupported ref clk\n"); + break; + } + + return reg; +} + +/* + * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock + * from clock core. Further sets the FSEL values for HighSpeed operations. + */ +static unsigned int +exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst) +{ + static u32 reg; + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + /* restore any previous reference clock settings */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + reg &= ~PHYCLKRST_REFCLKSEL_MASK; + reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK; + + reg &= ~PHYCLKRST_FSEL_UTMI_MASK | + PHYCLKRST_MPLL_MULTIPLIER_MASK | + PHYCLKRST_SSC_REFCLKSEL_MASK; + reg |= PHYCLKRST_FSEL(phy_drd->extrefclk); + + return reg; +} + +static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + reg |= PHYPARAM1_PCS_TXDEEMPH; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_SSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + u32 reg; + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Set Loss-of-Signal Detector sensitivity */ + reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK; + reg |= PHYPARAM0_REF_LOSLEVEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Set Tx De-Emphasis level */ + reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; + reg |= PHYPARAM1_PCS_TXDEEMPH; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + + /* UTMI Power Control */ + writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg &= ~PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); +} + +static int exynos5_usbdrd_phy_init(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + /* Reset USB 3.0 PHY */ + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0); + writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME); + + /* + * Setting the Frame length Adj value[6:1] to default 0x20 + * See xHCI 1.0 spec, 5.2.4 + */ + reg = LINKSYSTEM_XHCI_VERSION_CONTROL | + LINKSYSTEM_FLADJ(0x20); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM); + + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + /* Select PHY CLK source */ + reg &= ~PHYPARAM0_REF_USE_PAD; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0); + + /* This bit must be set for both HS and SS operations */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + reg |= PHYUTMICLKSEL_UTMI_CLKSEL; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + /* reference clock settings */ + reg = inst->phy_cfg->set_refclk(inst); + + /* Digital power supply in normal operating mode */ + reg |= PHYCLKRST_RETENABLEN | + /* Enable ref clock for SS function */ + PHYCLKRST_REF_SSP_EN | + /* Enable spread spectrum */ + PHYCLKRST_SSC_EN | + /* Power down HS Bias and PLL blocks in suspend mode */ + PHYCLKRST_COMMONONN | + /* Reset the port */ + PHYCLKRST_PORTRESET; + + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + udelay(10); + + reg &= ~PHYCLKRST_PORTRESET; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos5_usbdrd_phy_exit(struct phy *phy) +{ + int ret; + u32 reg; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + ret = clk_prepare_enable(phy_drd->clk); + if (ret) + return ret; + + reg = PHYUTMI_OTGDISABLE | + PHYUTMI_FORCESUSPEND | + PHYUTMI_FORCESLEEP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI); + + /* Resetting the PHYCLKRST enable bits to reduce leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + reg &= ~(PHYCLKRST_REF_SSP_EN | + PHYCLKRST_SSC_EN | + PHYCLKRST_COMMONONN); + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST); + + /* Control PHYTEST to remove leakage current */ + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + reg |= PHYTEST_POWERDOWN_SSP | + PHYTEST_POWERDOWN_HSP; + writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); + + clk_disable_unprepare(phy_drd->clk); + + return 0; +} + +static int exynos5_usbdrd_phy_power_on(struct phy *phy) +{ + int ret; + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n"); + + clk_prepare_enable(phy_drd->ref_clk); + if (!phy_drd->drv_data->has_common_clk_gate) { + clk_prepare_enable(phy_drd->pipeclk); + clk_prepare_enable(phy_drd->utmiclk); + clk_prepare_enable(phy_drd->itpclk); + } + + /* Enable VBUS supply */ + if (phy_drd->vbus_boost) { + ret = regulator_enable(phy_drd->vbus_boost); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable VBUS boost supply\n"); + goto fail_vbus; + } + } + + if (phy_drd->vbus) { + ret = regulator_enable(phy_drd->vbus); + if (ret) { + dev_err(phy_drd->dev, "Failed to enable VBUS supply\n"); + goto fail_vbus_boost; + } + } + + /* Power-on PHY*/ + inst->phy_cfg->phy_isol(inst, 0); + + return 0; + +fail_vbus_boost: + if (phy_drd->vbus_boost) + regulator_disable(phy_drd->vbus_boost); + +fail_vbus: + clk_disable_unprepare(phy_drd->ref_clk); + if (!phy_drd->drv_data->has_common_clk_gate) { + clk_disable_unprepare(phy_drd->itpclk); + clk_disable_unprepare(phy_drd->utmiclk); + clk_disable_unprepare(phy_drd->pipeclk); + } + + return ret; +} + +static int exynos5_usbdrd_phy_power_off(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + + dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n"); + + /* Power-off the PHY */ + inst->phy_cfg->phy_isol(inst, 1); + + /* Disable VBUS supply */ + if (phy_drd->vbus) + regulator_disable(phy_drd->vbus); + if (phy_drd->vbus_boost) + regulator_disable(phy_drd->vbus_boost); + + clk_disable_unprepare(phy_drd->ref_clk); + if (!phy_drd->drv_data->has_common_clk_gate) { + clk_disable_unprepare(phy_drd->itpclk); + clk_disable_unprepare(phy_drd->pipeclk); + clk_disable_unprepare(phy_drd->utmiclk); + } + + return 0; +} + +static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= EXYNOS5_DRDPHYS_NUM)) + return ERR_PTR(-ENODEV); + + return phy_drd->phys[args->args[0]].phy; +} + +static struct phy_ops exynos5_usbdrd_phy_ops = { + .init = exynos5_usbdrd_phy_init, + .exit = exynos5_usbdrd_phy_exit, + .power_on = exynos5_usbdrd_phy_power_on, + .power_off = exynos5_usbdrd_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) +{ + unsigned long ref_rate; + int ret; + + phy_drd->clk = devm_clk_get(phy_drd->dev, "phy"); + if (IS_ERR(phy_drd->clk)) { + dev_err(phy_drd->dev, "Failed to get phy clock\n"); + return PTR_ERR(phy_drd->clk); + } + + phy_drd->ref_clk = devm_clk_get(phy_drd->dev, "ref"); + if (IS_ERR(phy_drd->ref_clk)) { + dev_err(phy_drd->dev, "Failed to get phy reference clock\n"); + return PTR_ERR(phy_drd->ref_clk); + } + ref_rate = clk_get_rate(phy_drd->ref_clk); + + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) { + dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n", + ref_rate); + return ret; + } + + if (!phy_drd->drv_data->has_common_clk_gate) { + phy_drd->pipeclk = devm_clk_get(phy_drd->dev, "phy_pipe"); + if (IS_ERR(phy_drd->pipeclk)) { + dev_info(phy_drd->dev, + "PIPE3 phy operational clock not specified\n"); + phy_drd->pipeclk = NULL; + } + + phy_drd->utmiclk = devm_clk_get(phy_drd->dev, "phy_utmi"); + if (IS_ERR(phy_drd->utmiclk)) { + dev_info(phy_drd->dev, + "UTMI phy operational clock not specified\n"); + phy_drd->utmiclk = NULL; + } + + phy_drd->itpclk = devm_clk_get(phy_drd->dev, "itp"); + if (IS_ERR(phy_drd->itpclk)) { + dev_info(phy_drd->dev, + "ITP clock from main OSC not specified\n"); + phy_drd->itpclk = NULL; + } + } + + return 0; +} + +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_utmi_init, + .set_refclk = exynos5_usbdrd_utmi_set_refclk, + }, + { + .id = EXYNOS5_DRDPHY_PIPE3, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos5_usbdrd_pipe3_init, + .set_refclk = exynos5_usbdrd_pipe3_set_refclk, + }, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL, + .has_common_clk_gate = true, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .has_common_clk_gate = true, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL, + .has_common_clk_gate = false, +}; + +static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = { + .phy_cfg = phy_cfg_exynos5, + .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL, + .has_common_clk_gate = false, +}; + +static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-usbdrd-phy", + .data = &exynos5250_usbdrd_phy + }, { + .compatible = "samsung,exynos5420-usbdrd-phy", + .data = &exynos5420_usbdrd_phy + }, { + .compatible = "samsung,exynos5433-usbdrd-phy", + .data = &exynos5433_usbdrd_phy + }, { + .compatible = "samsung,exynos7-usbdrd-phy", + .data = &exynos7_usbdrd_phy + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match); + +static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct exynos5_usbdrd_phy *phy_drd; + struct phy_provider *phy_provider; + struct resource *res; + const struct of_device_id *match; + const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct regmap *reg_pmu; + u32 pmu_offset; + int i, ret; + int channel; + + phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL); + if (!phy_drd) + return -ENOMEM; + + dev_set_drvdata(dev, phy_drd); + phy_drd->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy_drd->reg_phy = devm_ioremap_resource(dev, res); + if (IS_ERR(phy_drd->reg_phy)) + return PTR_ERR(phy_drd->reg_phy); + + match = of_match_node(exynos5_usbdrd_phy_of_match, pdev->dev.of_node); + + drv_data = match->data; + phy_drd->drv_data = drv_data; + + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); + if (ret) { + dev_err(dev, "Failed to initialize clocks\n"); + return ret; + } + + reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(reg_pmu)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); + return PTR_ERR(reg_pmu); + } + + /* + * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with + * each having separate power control registers. + * 'channel' facilitates to set such registers. + */ + channel = of_alias_get_id(node, "usbdrdphy"); + if (channel < 0) + dev_dbg(dev, "Not a multi-controller usbdrd phy\n"); + + switch (channel) { + case 1: + pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy; + break; + case 0: + default: + pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy; + break; + } + + /* Get Vbus regulators */ + phy_drd->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(phy_drd->vbus)) { + ret = PTR_ERR(phy_drd->vbus); + if (ret == -EPROBE_DEFER) + return ret; + + dev_warn(dev, "Failed to get VBUS supply regulator\n"); + phy_drd->vbus = NULL; + } + + phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost"); + if (IS_ERR(phy_drd->vbus_boost)) { + ret = PTR_ERR(phy_drd->vbus_boost); + if (ret == -EPROBE_DEFER) + return ret; + + dev_warn(dev, "Failed to get VBUS boost supply regulator\n"); + phy_drd->vbus_boost = NULL; + } + + dev_vdbg(dev, "Creating usbdrd_phy phy\n"); + + for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) { + struct phy *phy = devm_phy_create(dev, NULL, + &exynos5_usbdrd_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "Failed to create usbdrd_phy phy\n"); + return PTR_ERR(phy); + } + + phy_drd->phys[i].phy = phy; + phy_drd->phys[i].index = i; + phy_drd->phys[i].reg_pmu = reg_pmu; + phy_drd->phys[i].pmu_offset = pmu_offset; + phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i]; + phy_set_drvdata(phy, &phy_drd->phys[i]); + } + + phy_provider = devm_of_phy_provider_register(dev, + exynos5_usbdrd_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(phy_drd->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver exynos5_usb3drd_phy = { + .probe = exynos5_usbdrd_phy_probe, + .driver = { + .of_match_table = exynos5_usbdrd_phy_of_match, + .name = "exynos5_usb3drd_phy", + } +}; + +module_platform_driver(exynos5_usb3drd_phy); +MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver"); +MODULE_AUTHOR("Vivek Gautam "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:exynos5_usb3drd_phy"); diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c new file mode 100644 index 000000000..bc858cc80 --- /dev/null +++ b/drivers/phy/phy-exynos5250-sata.c @@ -0,0 +1,250 @@ +/* + * Samsung SATA SerDes(PHY) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Girish K S + * Yuvaraj Kumar C D + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SATAPHY_CONTROL_OFFSET 0x0724 +#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0) +#define EXYNOS5_SATA_RESET 0x4 +#define RESET_GLOBAL_RST_N BIT(0) +#define RESET_CMN_RST_N BIT(1) +#define RESET_CMN_BLOCK_RST_N BIT(2) +#define RESET_CMN_I2C_RST_N BIT(3) +#define RESET_TX_RX_PIPE_RST_N BIT(4) +#define RESET_TX_RX_BLOCK_RST_N BIT(5) +#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7)) +#define LINK_RESET 0xf0000 +#define EXYNOS5_SATA_MODE0 0x10 +#define SATA_SPD_GEN3 BIT(1) +#define EXYNOS5_SATA_CTRL0 0x14 +#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9) +#define CTRL0_P0_PHY_CALIBRATED BIT(8) +#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0 +#define PHCTRLM_REF_RATE BIT(1) +#define PHCTRLM_HIGH_SPEED BIT(0) +#define EXYNOS5_SATA_PHSATA_STATM 0xf0 +#define PHSTATM_PLL_LOCKED BIT(0) + +#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000)) + +struct exynos_sata_phy { + struct phy *phy; + struct clk *phyclk; + void __iomem *regs; + struct regmap *pmureg; + struct i2c_client *client; +}; + +static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, + u32 status) +{ + unsigned long timeout = jiffies + PHY_PLL_TIMEOUT; + + while (time_before(jiffies, timeout)) { + if ((readl(base + reg) & checkbit) == status) + return 0; + } + + return -EFAULT; +} + +static int exynos_sata_phy_power_on(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + +} + +static int exynos_sata_phy_power_off(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, false); + +} + +static int exynos_sata_phy_init(struct phy *phy) +{ + u32 val = 0; + int ret = 0; + u8 buf[] = { 0x3a, 0x0b }; + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + if (ret != 0) + dev_err(&sata_phy->phy->dev, "phy init failed\n"); + + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N + | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N + | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= LINK_RESET; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val &= ~PHCTRLM_REF_RATE; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + /* High speed enable for Gen3 */ + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val |= PHCTRLM_HIGH_SPEED; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0); + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED; + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0); + + val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0); + val |= SATA_SPD_GEN3; + writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0); + + ret = i2c_master_send(sata_phy->client, buf, sizeof(buf)); + if (ret < 0) + return ret; + + /* release cmu reset */ + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val &= ~RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + ret = wait_for_reg_status(sata_phy->regs, + EXYNOS5_SATA_PHSATA_STATM, + PHSTATM_PLL_LOCKED, 1); + if (ret < 0) + dev_err(&sata_phy->phy->dev, + "PHY PLL locking failed\n"); + return ret; +} + +static struct phy_ops exynos_sata_phy_ops = { + .init = exynos_sata_phy_init, + .power_on = exynos_sata_phy_power_on, + .power_off = exynos_sata_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_sata_phy_probe(struct platform_device *pdev) +{ + struct exynos_sata_phy *sata_phy; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct device_node *node; + int ret = 0; + + sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL); + if (!sata_phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + sata_phy->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(sata_phy->regs)) + return PTR_ERR(sata_phy->regs); + + sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,syscon-phandle"); + if (IS_ERR(sata_phy->pmureg)) { + dev_err(dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(sata_phy->pmureg); + } + + node = of_parse_phandle(dev->of_node, + "samsung,exynos-sataphy-i2c-phandle", 0); + if (!node) + return -EINVAL; + + sata_phy->client = of_find_i2c_device_by_node(node); + if (!sata_phy->client) + return -EPROBE_DEFER; + + dev_set_drvdata(dev, sata_phy); + + sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); + if (IS_ERR(sata_phy->phyclk)) { + dev_err(dev, "failed to get clk for PHY\n"); + return PTR_ERR(sata_phy->phyclk); + } + + ret = clk_prepare_enable(sata_phy->phyclk); + if (ret < 0) { + dev_err(dev, "failed to enable source clk\n"); + return ret; + } + + sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); + if (IS_ERR(sata_phy->phy)) { + clk_disable_unprepare(sata_phy->phyclk); + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(sata_phy->phy); + } + + phy_set_drvdata(sata_phy->phy, sata_phy); + + phy_provider = devm_of_phy_provider_register(dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + clk_disable_unprepare(sata_phy->phyclk); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static const struct of_device_id exynos_sata_phy_of_match[] = { + { .compatible = "samsung,exynos5250-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match); + +static struct platform_driver exynos_sata_phy_driver = { + .probe = exynos_sata_phy_probe, + .driver = { + .of_match_table = exynos_sata_phy_of_match, + .name = "samsung,sata-phy", + } +}; +module_platform_driver(exynos_sata_phy_driver); + +MODULE_DESCRIPTION("Samsung SerDes PHY driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Girish K S "); +MODULE_AUTHOR("Yuvaraj C D "); diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/phy-exynos5250-usb2.c new file mode 100644 index 000000000..2ed1735a0 --- /dev/null +++ b/drivers/phy/phy-exynos5250-usb2.c @@ -0,0 +1,401 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0 +#define EXYNOS_5250_REFCLKSEL_XO 0x1 +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2 + +#define EXYNOS_5250_FSEL_9MHZ6 0x0 +#define EXYNOS_5250_FSEL_10MHZ 0x1 +#define EXYNOS_5250_FSEL_12MHZ 0x2 +#define EXYNOS_5250_FSEL_19MHZ2 0x3 +#define EXYNOS_5250_FSEL_20MHZ 0x4 +#define EXYNOS_5250_FSEL_24MHZ 0x5 +#define EXYNOS_5250_FSEL_50MHZ 0x7 + +/* Normal host */ +#define EXYNOS_5250_HOSTPHYCTRL0 0x0 + +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL BIT(31) +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19 +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16 +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \ + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN BIT(11) +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE BIT(10) +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N BIT(9) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ BIT(6) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP BIT(5) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST BIT(2) +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST BIT(1) +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST BIT(0) + +/* HSIC0 & HSIC1 */ +#define EXYNOS_5250_HSICPHYCTRL1 0x10 +#define EXYNOS_5250_HSICPHYCTRL2 0x20 + +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK (0x3 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT (0x2 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK (0x7f << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 (0x24 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15 (0x1c << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16 (0x1a << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2 (0x15 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20 (0x14 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_SIDDQ BIT(6) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP BIT(5) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST BIT(2) +#define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST BIT(0) + +/* EHCI control */ +#define EXYNOS_5250_HOSTEHCICTRL 0x30 +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN BIT(29) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 BIT(28) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 BIT(27) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 BIT(26) +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN BIT(25) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \ + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE BIT(0) + +/* OHCI control */ +#define EXYNOS_5250_HOSTOHCICTRL 0x34 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \ + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT) +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN BIT(0) + +/* USBOTG */ +#define EXYNOS_5250_USBOTGSYS 0x38 +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET BIT(14) +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG BIT(13) +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST BIT(12) +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9 +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP BIT(8) +#define EXYNOS_5250_USBOTGSYS_COMMON_ON BIT(7) +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4 +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP BIT(3) +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE BIT(2) +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG BIT(1) +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND BIT(0) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704 +#define EXYNOS_5250_USB_ISOL_OTG BIT(0) +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_5250_USB_ISOL_HOST BIT(0) + +/* Mode swtich register */ +#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230 +#define EXYNOS_5250_MODE_SWITCH_MASK 1 +#define EXYNOS_5250_MODE_SWITCH_DEVICE 0 +#define EXYNOS_5250_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS5250_DEVICE, + EXYNOS5250_HOST, + EXYNOS5250_HSIC0, + EXYNOS5250_HSIC1, + EXYNOS5250_NUM_PHYS, +}; + +/* + * exynos5250_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_5250_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_5250_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_5250_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_5250_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_5250_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_5250_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_5250_FSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_5250_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; + mask = EXYNOS_5250_USB_ISOL_OTG; + break; + case EXYNOS5250_HOST: + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_5250_USB_ISOL_HOST; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 ehci; + u32 ohci; + u32 hsic; + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + regmap_update_bits(drv->reg_sys, + EXYNOS_5250_MODE_SWITCH_OFFSET, + EXYNOS_5250_MODE_SWITCH_MASK, + EXYNOS_5250_MODE_SWITCH_DEVICE); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(100); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_OTGDISABLE); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + + + break; + case EXYNOS5250_HOST: + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + /* Host registers configuration */ + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + /* The clock */ + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK; + ctrl0 |= drv->ref_reg_val << + EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT; + + /* Reset */ + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL | + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP); + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST | + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N; + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + udelay(10); + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(10); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET); + + /* HSIC phy configuration */ + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_PHYSWRST); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + udelay(10); + hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST; + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + + /* Enable EHCI DMA burst */ + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16; + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + + /* OHCI settings */ + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + /* Following code is based on the old driver */ + ohci |= 0x1 << 3; + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + + break; + } + exynos5250_isol(inst, 0); + + return 0; +} + +static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 hsic; + + exynos5250_isol(inst, 1); + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + break; + case EXYNOS5250_HOST: + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + break; + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_SIDDQ | + EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP | + EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND + ); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + break; + } + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos5250_phys[] = { + { + .label = "device", + .id = EXYNOS5250_DEVICE, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS5250_HSIC1, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + +const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS5250_NUM_PHYS, + .phys = exynos5250_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c new file mode 100644 index 000000000..d6b22659c --- /dev/null +++ b/drivers/phy/phy-hix5hd2-sata.c @@ -0,0 +1,191 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SATA_PHY0_CTLL 0xa0 +#define MPLL_MULTIPLIER_SHIFT 1 +#define MPLL_MULTIPLIER_MASK 0xfe +#define MPLL_MULTIPLIER_50M 0x3c +#define MPLL_MULTIPLIER_100M 0x1e +#define PHY_RESET BIT(0) +#define REF_SSP_EN BIT(9) +#define SSC_EN BIT(10) +#define REF_USE_PAD BIT(23) + +#define SATA_PORT_PHYCTL 0x174 +#define SPEED_MODE_MASK 0x6f0000 +#define HALF_RATE_SHIFT 16 +#define PHY_CONFIG_SHIFT 18 +#define GEN2_EN_SHIFT 21 +#define SPEED_CTRL BIT(20) + +#define SATA_PORT_PHYCTL1 0x148 +#define AMPLITUDE_MASK 0x3ffffe +#define AMPLITUDE_GEN3 0x68 +#define AMPLITUDE_GEN3_SHIFT 15 +#define AMPLITUDE_GEN2 0x56 +#define AMPLITUDE_GEN2_SHIFT 8 +#define AMPLITUDE_GEN1 0x56 +#define AMPLITUDE_GEN1_SHIFT 1 + +#define SATA_PORT_PHYCTL2 0x14c +#define PREEMPH_MASK 0x3ffff +#define PREEMPH_GEN3 0x20 +#define PREEMPH_GEN3_SHIFT 12 +#define PREEMPH_GEN2 0x15 +#define PREEMPH_GEN2_SHIFT 6 +#define PREEMPH_GEN1 0x5 +#define PREEMPH_GEN1_SHIFT 0 + +struct hix5hd2_priv { + void __iomem *base; + struct regmap *peri_ctrl; +}; + +enum phy_speed_mode { + SPEED_MODE_GEN1 = 0, + SPEED_MODE_GEN2 = 1, + SPEED_MODE_GEN3 = 2, +}; + +static int hix5hd2_sata_phy_init(struct phy *phy) +{ + struct hix5hd2_priv *priv = phy_get_drvdata(phy); + u32 val, data[2]; + int ret; + + if (priv->peri_ctrl) { + ret = of_property_read_u32_array(phy->dev.of_node, + "hisilicon,power-reg", + &data[0], 2); + if (ret) { + dev_err(&phy->dev, "Fail read hisilicon,power-reg\n"); + return ret; + } + + regmap_update_bits(priv->peri_ctrl, data[0], + BIT(data[1]), BIT(data[1])); + } + + /* reset phy */ + val = readl_relaxed(priv->base + SATA_PHY0_CTLL); + val &= ~(MPLL_MULTIPLIER_MASK | REF_USE_PAD); + val |= MPLL_MULTIPLIER_50M << MPLL_MULTIPLIER_SHIFT | + REF_SSP_EN | PHY_RESET; + writel_relaxed(val, priv->base + SATA_PHY0_CTLL); + msleep(20); + val &= ~PHY_RESET; + writel_relaxed(val, priv->base + SATA_PHY0_CTLL); + + val = readl_relaxed(priv->base + SATA_PORT_PHYCTL1); + val &= ~AMPLITUDE_MASK; + val |= AMPLITUDE_GEN3 << AMPLITUDE_GEN3_SHIFT | + AMPLITUDE_GEN2 << AMPLITUDE_GEN2_SHIFT | + AMPLITUDE_GEN1 << AMPLITUDE_GEN1_SHIFT; + writel_relaxed(val, priv->base + SATA_PORT_PHYCTL1); + + val = readl_relaxed(priv->base + SATA_PORT_PHYCTL2); + val &= ~PREEMPH_MASK; + val |= PREEMPH_GEN3 << PREEMPH_GEN3_SHIFT | + PREEMPH_GEN2 << PREEMPH_GEN2_SHIFT | + PREEMPH_GEN1 << PREEMPH_GEN1_SHIFT; + writel_relaxed(val, priv->base + SATA_PORT_PHYCTL2); + + /* ensure PHYCTRL setting takes effect */ + val = readl_relaxed(priv->base + SATA_PORT_PHYCTL); + val &= ~SPEED_MODE_MASK; + val |= SPEED_MODE_GEN1 << HALF_RATE_SHIFT | + SPEED_MODE_GEN1 << PHY_CONFIG_SHIFT | + SPEED_MODE_GEN1 << GEN2_EN_SHIFT | SPEED_CTRL; + writel_relaxed(val, priv->base + SATA_PORT_PHYCTL); + + msleep(20); + val &= ~SPEED_MODE_MASK; + val |= SPEED_MODE_GEN3 << HALF_RATE_SHIFT | + SPEED_MODE_GEN3 << PHY_CONFIG_SHIFT | + SPEED_MODE_GEN3 << GEN2_EN_SHIFT | SPEED_CTRL; + writel_relaxed(val, priv->base + SATA_PORT_PHYCTL); + + val &= ~(SPEED_MODE_MASK | SPEED_CTRL); + val |= SPEED_MODE_GEN2 << HALF_RATE_SHIFT | + SPEED_MODE_GEN2 << PHY_CONFIG_SHIFT | + SPEED_MODE_GEN2 << GEN2_EN_SHIFT; + writel_relaxed(val, priv->base + SATA_PORT_PHYCTL); + + return 0; +} + +static struct phy_ops hix5hd2_sata_phy_ops = { + .init = hix5hd2_sata_phy_init, + .owner = THIS_MODULE, +}; + +static int hix5hd2_sata_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy *phy; + struct hix5hd2_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + priv->base = devm_ioremap(dev, res->start, resource_size(res)); + if (!priv->base) + return -ENOMEM; + + priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,peripheral-syscon"); + if (IS_ERR(priv->peri_ctrl)) + priv->peri_ctrl = NULL; + + phy = devm_phy_create(dev, NULL, &hix5hd2_sata_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id hix5hd2_sata_phy_of_match[] = { + {.compatible = "hisilicon,hix5hd2-sata-phy",}, + { }, +}; +MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match); + +static struct platform_driver hix5hd2_sata_phy_driver = { + .probe = hix5hd2_sata_phy_probe, + .driver = { + .name = "hix5hd2-sata-phy", + .of_match_table = hix5hd2_sata_phy_of_match, + } +}; +module_platform_driver(hix5hd2_sata_phy_driver); + +MODULE_AUTHOR("Jiancheng Xue "); +MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver"); +MODULE_ALIAS("platform:hix5hd2-sata-phy"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c new file mode 100644 index 000000000..c4cc11dcb --- /dev/null +++ b/drivers/phy/phy-miphy28lp.c @@ -0,0 +1,1285 @@ +/* + * Copyright (C) 2014 STMicroelectronics + * + * STMicroelectronics PHY driver MiPHY28lp (for SoC STiH407). + * + * Author: Alexandre Torgue + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* MiPHY registers */ +#define MIPHY_CONF_RESET 0x00 +#define RST_APPLI_SW BIT(0) +#define RST_CONF_SW BIT(1) +#define RST_MACRO_SW BIT(2) + +#define MIPHY_RESET 0x01 +#define RST_PLL_SW BIT(0) +#define RST_COMP_SW BIT(2) + +#define MIPHY_STATUS_1 0x02 +#define PHY_RDY BIT(0) +#define HFC_RDY BIT(1) +#define HFC_PLL BIT(2) + +#define MIPHY_CONTROL 0x04 +#define TERM_EN_SW BIT(2) +#define DIS_LINK_RST BIT(3) +#define AUTO_RST_RX BIT(4) +#define PX_RX_POL BIT(5) + +#define MIPHY_BOUNDARY_SEL 0x0a +#define TX_SEL BIT(6) +#define SSC_SEL BIT(4) +#define GENSEL_SEL BIT(0) + +#define MIPHY_BOUNDARY_1 0x0b +#define MIPHY_BOUNDARY_2 0x0c +#define SSC_EN_SW BIT(2) + +#define MIPHY_PLL_CLKREF_FREQ 0x0d +#define MIPHY_SPEED 0x0e +#define TX_SPDSEL_80DEC 0 +#define TX_SPDSEL_40DEC 1 +#define TX_SPDSEL_20DEC 2 +#define RX_SPDSEL_80DEC 0 +#define RX_SPDSEL_40DEC (1 << 2) +#define RX_SPDSEL_20DEC (2 << 2) + +#define MIPHY_CONF 0x0f +#define MIPHY_CTRL_TEST_SEL 0x20 +#define MIPHY_CTRL_TEST_1 0x21 +#define MIPHY_CTRL_TEST_2 0x22 +#define MIPHY_CTRL_TEST_3 0x23 +#define MIPHY_CTRL_TEST_4 0x24 +#define MIPHY_FEEDBACK_TEST 0x25 +#define MIPHY_DEBUG_BUS 0x26 +#define MIPHY_DEBUG_STATUS_MSB 0x27 +#define MIPHY_DEBUG_STATUS_LSB 0x28 +#define MIPHY_PWR_RAIL_1 0x29 +#define MIPHY_PWR_RAIL_2 0x2a +#define MIPHY_SYNCHAR_CONTROL 0x30 + +#define MIPHY_COMP_FSM_1 0x3a +#define COMP_START BIT(6) + +#define MIPHY_COMP_FSM_6 0x3f +#define COMP_DONE BIT(7) + +#define MIPHY_COMP_POSTP 0x42 +#define MIPHY_TX_CTRL_1 0x49 +#define TX_REG_STEP_0V 0 +#define TX_REG_STEP_P_25MV 1 +#define TX_REG_STEP_P_50MV 2 +#define TX_REG_STEP_N_25MV 7 +#define TX_REG_STEP_N_50MV 6 +#define TX_REG_STEP_N_75MV 5 + +#define MIPHY_TX_CTRL_2 0x4a +#define TX_SLEW_SW_40_PS 0 +#define TX_SLEW_SW_80_PS 1 +#define TX_SLEW_SW_120_PS 2 + +#define MIPHY_TX_CTRL_3 0x4b +#define MIPHY_TX_CAL_MAN 0x4e +#define TX_SLEW_CAL_MAN_EN BIT(0) + +#define MIPHY_TST_BIAS_BOOST_2 0x62 +#define MIPHY_BIAS_BOOST_1 0x63 +#define MIPHY_BIAS_BOOST_2 0x64 +#define MIPHY_RX_DESBUFF_FDB_2 0x67 +#define MIPHY_RX_DESBUFF_FDB_3 0x68 +#define MIPHY_SIGDET_COMPENS1 0x69 +#define MIPHY_SIGDET_COMPENS2 0x6a +#define MIPHY_JITTER_PERIOD 0x6b +#define MIPHY_JITTER_AMPLITUDE_1 0x6c +#define MIPHY_JITTER_AMPLITUDE_2 0x6d +#define MIPHY_JITTER_AMPLITUDE_3 0x6e +#define MIPHY_RX_K_GAIN 0x78 +#define MIPHY_RX_BUFFER_CTRL 0x7a +#define VGA_GAIN BIT(0) +#define EQ_DC_GAIN BIT(2) +#define EQ_BOOST_GAIN BIT(3) + +#define MIPHY_RX_VGA_GAIN 0x7b +#define MIPHY_RX_EQU_GAIN_1 0x7f +#define MIPHY_RX_EQU_GAIN_2 0x80 +#define MIPHY_RX_EQU_GAIN_3 0x81 +#define MIPHY_RX_CAL_CTRL_1 0x97 +#define MIPHY_RX_CAL_CTRL_2 0x98 + +#define MIPHY_RX_CAL_OFFSET_CTRL 0x99 +#define CAL_OFFSET_VGA_64 (0x03 << 0) +#define CAL_OFFSET_THRESHOLD_64 (0x03 << 2) +#define VGA_OFFSET_POLARITY BIT(4) +#define OFFSET_COMPENSATION_EN BIT(6) + +#define MIPHY_RX_CAL_VGA_STEP 0x9a +#define MIPHY_RX_CAL_EYE_MIN 0x9d +#define MIPHY_RX_CAL_OPT_LENGTH 0x9f +#define MIPHY_RX_LOCK_CTRL_1 0xc1 +#define MIPHY_RX_LOCK_SETTINGS_OPT 0xc2 +#define MIPHY_RX_LOCK_STEP 0xc4 + +#define MIPHY_RX_SIGDET_SLEEP_OA 0xc9 +#define MIPHY_RX_SIGDET_SLEEP_SEL 0xca +#define MIPHY_RX_SIGDET_WAIT_SEL 0xcb +#define MIPHY_RX_SIGDET_DATA_SEL 0xcc +#define EN_ULTRA_LOW_POWER BIT(0) +#define EN_FIRST_HALF BIT(1) +#define EN_SECOND_HALF BIT(2) +#define EN_DIGIT_SIGNAL_CHECK BIT(3) + +#define MIPHY_RX_POWER_CTRL_1 0xcd +#define MIPHY_RX_POWER_CTRL_2 0xce +#define MIPHY_PLL_CALSET_CTRL 0xd3 +#define MIPHY_PLL_CALSET_1 0xd4 +#define MIPHY_PLL_CALSET_2 0xd5 +#define MIPHY_PLL_CALSET_3 0xd6 +#define MIPHY_PLL_CALSET_4 0xd7 +#define MIPHY_PLL_SBR_1 0xe3 +#define SET_NEW_CHANGE BIT(1) + +#define MIPHY_PLL_SBR_2 0xe4 +#define MIPHY_PLL_SBR_3 0xe5 +#define MIPHY_PLL_SBR_4 0xe6 +#define MIPHY_PLL_COMMON_MISC_2 0xe9 +#define START_ACT_FILT BIT(6) + +#define MIPHY_PLL_SPAREIN 0xeb + +/* + * On STiH407 the glue logic can be different among MiPHY devices; for example: + * MiPHY0: OSC_FORCE_EXT means: + * 0: 30MHz crystal clk - 1: 100MHz ext clk routed through MiPHY1 + * MiPHY1: OSC_FORCE_EXT means: + * 1: 30MHz crystal clk - 0: 100MHz ext clk routed through MiPHY1 + * Some devices have not the possibility to check if the osc is ready. + */ +#define MIPHY_OSC_FORCE_EXT BIT(3) +#define MIPHY_OSC_RDY BIT(5) + +#define MIPHY_CTRL_MASK 0x0f +#define MIPHY_CTRL_DEFAULT 0 +#define MIPHY_CTRL_SYNC_D_EN BIT(2) + +/* SATA / PCIe defines */ +#define SATA_CTRL_MASK 0x07 +#define PCIE_CTRL_MASK 0xff +#define SATA_CTRL_SELECT_SATA 1 +#define SATA_CTRL_SELECT_PCIE 0 +#define SYSCFG_PCIE_PCIE_VAL 0x80 +#define SATA_SPDMODE 1 + +#define MIPHY_SATA_BANK_NB 3 +#define MIPHY_PCIE_BANK_NB 2 + +enum { + SYSCFG_CTRL, + SYSCFG_STATUS, + SYSCFG_PCI, + SYSCFG_SATA, + SYSCFG_REG_MAX, +}; + +struct miphy28lp_phy { + struct phy *phy; + struct miphy28lp_dev *phydev; + void __iomem *base; + void __iomem *pipebase; + + bool osc_force_ext; + bool osc_rdy; + bool px_rx_pol_inv; + bool ssc; + bool tx_impedance; + + struct reset_control *miphy_rst; + + u32 sata_gen; + + /* Sysconfig registers offsets needed to configure the device */ + u32 syscfg_reg[SYSCFG_REG_MAX]; + u8 type; +}; + +struct miphy28lp_dev { + struct device *dev; + struct regmap *regmap; + struct mutex miphy_mutex; + struct miphy28lp_phy **phys; + int nphys; +}; + +struct miphy_initval { + u16 reg; + u16 val; +}; + +enum miphy_sata_gen { SATA_GEN1, SATA_GEN2, SATA_GEN3 }; + +static char *PHY_TYPE_name[] = { "sata-up", "pcie-up", "", "usb3-up" }; + +struct pll_ratio { + int clk_ref; + int calset_1; + int calset_2; + int calset_3; + int calset_4; + int cal_ctrl; +}; + +static struct pll_ratio sata_pll_ratio = { + .clk_ref = 0x1e, + .calset_1 = 0xc8, + .calset_2 = 0x00, + .calset_3 = 0x00, + .calset_4 = 0x00, + .cal_ctrl = 0x00, +}; + +static struct pll_ratio pcie_pll_ratio = { + .clk_ref = 0x1e, + .calset_1 = 0xa6, + .calset_2 = 0xaa, + .calset_3 = 0xaa, + .calset_4 = 0x00, + .cal_ctrl = 0x00, +}; + +static struct pll_ratio usb3_pll_ratio = { + .clk_ref = 0x1e, + .calset_1 = 0xa6, + .calset_2 = 0xaa, + .calset_3 = 0xaa, + .calset_4 = 0x04, + .cal_ctrl = 0x00, +}; + +struct miphy28lp_pll_gen { + int bank; + int speed; + int bias_boost_1; + int bias_boost_2; + int tx_ctrl_1; + int tx_ctrl_2; + int tx_ctrl_3; + int rx_k_gain; + int rx_vga_gain; + int rx_equ_gain_1; + int rx_equ_gain_2; + int rx_equ_gain_3; + int rx_buff_ctrl; +}; + +static struct miphy28lp_pll_gen sata_pll_gen[] = { + { + .bank = 0x00, + .speed = TX_SPDSEL_80DEC | RX_SPDSEL_80DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xae, + .tx_ctrl_2 = 0x53, + .tx_ctrl_3 = 0x00, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x7d, + .rx_equ_gain_2 = 0x56, + .rx_equ_gain_3 = 0x00, + }, + { + .bank = 0x01, + .speed = TX_SPDSEL_40DEC | RX_SPDSEL_40DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xae, + .tx_ctrl_2 = 0x72, + .tx_ctrl_3 = 0x20, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x7d, + .rx_equ_gain_2 = 0x56, + .rx_equ_gain_3 = 0x00, + }, + { + .bank = 0x02, + .speed = TX_SPDSEL_20DEC | RX_SPDSEL_20DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xae, + .tx_ctrl_2 = 0xc0, + .tx_ctrl_3 = 0x20, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x7d, + .rx_equ_gain_2 = 0x56, + .rx_equ_gain_3 = 0x00, + }, +}; + +static struct miphy28lp_pll_gen pcie_pll_gen[] = { + { + .bank = 0x00, + .speed = TX_SPDSEL_40DEC | RX_SPDSEL_40DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xa5, + .tx_ctrl_1 = TX_REG_STEP_N_25MV, + .tx_ctrl_2 = 0x71, + .tx_ctrl_3 = 0x60, + .rx_k_gain = 0x98, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x79, + .rx_equ_gain_2 = 0x56, + }, + { + .bank = 0x01, + .speed = TX_SPDSEL_20DEC | RX_SPDSEL_20DEC, + .bias_boost_1 = 0x00, + .bias_boost_2 = 0xa5, + .tx_ctrl_1 = TX_REG_STEP_N_25MV, + .tx_ctrl_2 = 0x70, + .tx_ctrl_3 = 0x60, + .rx_k_gain = 0xcc, + .rx_buff_ctrl = EQ_BOOST_GAIN | EQ_DC_GAIN | VGA_GAIN, + .rx_vga_gain = 0x00, + .rx_equ_gain_1 = 0x78, + .rx_equ_gain_2 = 0x07, + }, +}; + +static inline void miphy28lp_set_reset(struct miphy28lp_phy *miphy_phy) +{ + void *base = miphy_phy->base; + u8 val; + + /* Putting Macro in reset */ + writeb_relaxed(RST_APPLI_SW, base + MIPHY_CONF_RESET); + + val = RST_APPLI_SW | RST_CONF_SW; + writeb_relaxed(val, base + MIPHY_CONF_RESET); + + writeb_relaxed(RST_APPLI_SW, base + MIPHY_CONF_RESET); + + /* Bringing the MIPHY-CPU registers out of reset */ + if (miphy_phy->type == PHY_TYPE_PCIE) { + val = AUTO_RST_RX | TERM_EN_SW; + writeb_relaxed(val, base + MIPHY_CONTROL); + } else { + val = AUTO_RST_RX | TERM_EN_SW | DIS_LINK_RST; + writeb_relaxed(val, base + MIPHY_CONTROL); + } +} + +static inline void miphy28lp_pll_calibration(struct miphy28lp_phy *miphy_phy, + struct pll_ratio *pll_ratio) +{ + void *base = miphy_phy->base; + u8 val; + + /* Applying PLL Settings */ + writeb_relaxed(0x1d, base + MIPHY_PLL_SPAREIN); + writeb_relaxed(pll_ratio->clk_ref, base + MIPHY_PLL_CLKREF_FREQ); + + /* PLL Ratio */ + writeb_relaxed(pll_ratio->calset_1, base + MIPHY_PLL_CALSET_1); + writeb_relaxed(pll_ratio->calset_2, base + MIPHY_PLL_CALSET_2); + writeb_relaxed(pll_ratio->calset_3, base + MIPHY_PLL_CALSET_3); + writeb_relaxed(pll_ratio->calset_4, base + MIPHY_PLL_CALSET_4); + writeb_relaxed(pll_ratio->cal_ctrl, base + MIPHY_PLL_CALSET_CTRL); + + writeb_relaxed(TX_SEL, base + MIPHY_BOUNDARY_SEL); + + val = (0x68 << 1) | TX_SLEW_CAL_MAN_EN; + writeb_relaxed(val, base + MIPHY_TX_CAL_MAN); + + val = VGA_OFFSET_POLARITY | CAL_OFFSET_THRESHOLD_64 | CAL_OFFSET_VGA_64; + + if (miphy_phy->type != PHY_TYPE_SATA) + val |= OFFSET_COMPENSATION_EN; + + writeb_relaxed(val, base + MIPHY_RX_CAL_OFFSET_CTRL); + + if (miphy_phy->type == PHY_TYPE_USB3) { + writeb_relaxed(0x00, base + MIPHY_CONF); + writeb_relaxed(0x70, base + MIPHY_RX_LOCK_STEP); + writeb_relaxed(EN_FIRST_HALF, base + MIPHY_RX_SIGDET_SLEEP_OA); + writeb_relaxed(EN_FIRST_HALF, base + MIPHY_RX_SIGDET_SLEEP_SEL); + writeb_relaxed(EN_FIRST_HALF, base + MIPHY_RX_SIGDET_WAIT_SEL); + + val = EN_DIGIT_SIGNAL_CHECK | EN_FIRST_HALF; + writeb_relaxed(val, base + MIPHY_RX_SIGDET_DATA_SEL); + } + +} + +static inline void miphy28lp_sata_config_gen(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int i; + + for (i = 0; i < ARRAY_SIZE(sata_pll_gen); i++) { + struct miphy28lp_pll_gen *gen = &sata_pll_gen[i]; + + /* Banked settings */ + writeb_relaxed(gen->bank, base + MIPHY_CONF); + writeb_relaxed(gen->speed, base + MIPHY_SPEED); + writeb_relaxed(gen->bias_boost_1, base + MIPHY_BIAS_BOOST_1); + writeb_relaxed(gen->bias_boost_2, base + MIPHY_BIAS_BOOST_2); + + /* TX buffer Settings */ + writeb_relaxed(gen->tx_ctrl_2, base + MIPHY_TX_CTRL_2); + writeb_relaxed(gen->tx_ctrl_3, base + MIPHY_TX_CTRL_3); + + /* RX Buffer Settings */ + writeb_relaxed(gen->rx_buff_ctrl, base + MIPHY_RX_BUFFER_CTRL); + writeb_relaxed(gen->rx_vga_gain, base + MIPHY_RX_VGA_GAIN); + writeb_relaxed(gen->rx_equ_gain_1, base + MIPHY_RX_EQU_GAIN_1); + writeb_relaxed(gen->rx_equ_gain_2, base + MIPHY_RX_EQU_GAIN_2); + writeb_relaxed(gen->rx_equ_gain_3, base + MIPHY_RX_EQU_GAIN_3); + } +} + +static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int i; + + for (i = 0; i < ARRAY_SIZE(pcie_pll_gen); i++) { + struct miphy28lp_pll_gen *gen = &pcie_pll_gen[i]; + + /* Banked settings */ + writeb_relaxed(gen->bank, base + MIPHY_CONF); + writeb_relaxed(gen->speed, base + MIPHY_SPEED); + writeb_relaxed(gen->bias_boost_1, base + MIPHY_BIAS_BOOST_1); + writeb_relaxed(gen->bias_boost_2, base + MIPHY_BIAS_BOOST_2); + + /* TX buffer Settings */ + writeb_relaxed(gen->tx_ctrl_1, base + MIPHY_TX_CTRL_1); + writeb_relaxed(gen->tx_ctrl_2, base + MIPHY_TX_CTRL_2); + writeb_relaxed(gen->tx_ctrl_3, base + MIPHY_TX_CTRL_3); + + writeb_relaxed(gen->rx_k_gain, base + MIPHY_RX_K_GAIN); + + /* RX Buffer Settings */ + writeb_relaxed(gen->rx_buff_ctrl, base + MIPHY_RX_BUFFER_CTRL); + writeb_relaxed(gen->rx_vga_gain, base + MIPHY_RX_VGA_GAIN); + writeb_relaxed(gen->rx_equ_gain_1, base + MIPHY_RX_EQU_GAIN_1); + writeb_relaxed(gen->rx_equ_gain_2, base + MIPHY_RX_EQU_GAIN_2); + } +} + +static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy) +{ + unsigned long finish = jiffies + 5 * HZ; + u8 val; + + /* Waiting for Compensation to complete */ + do { + val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6); + + if (time_after_eq(jiffies, finish)) + return -EBUSY; + cpu_relax(); + } while (!(val & COMP_DONE)); + + return 0; +} + + +static inline int miphy28lp_compensation(struct miphy28lp_phy *miphy_phy, + struct pll_ratio *pll_ratio) +{ + void __iomem *base = miphy_phy->base; + + /* Poll for HFC ready after reset release */ + /* Compensation measurement */ + writeb_relaxed(RST_PLL_SW | RST_COMP_SW, base + MIPHY_RESET); + + writeb_relaxed(0x00, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(pll_ratio->clk_ref, base + MIPHY_PLL_CLKREF_FREQ); + writeb_relaxed(COMP_START, base + MIPHY_COMP_FSM_1); + + if (miphy_phy->type == PHY_TYPE_PCIE) + writeb_relaxed(RST_PLL_SW, base + MIPHY_RESET); + + writeb_relaxed(0x00, base + MIPHY_RESET); + writeb_relaxed(START_ACT_FILT, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + + /* TX compensation offset to re-center TX impedance */ + writeb_relaxed(0x00, base + MIPHY_COMP_POSTP); + + if (miphy_phy->type == PHY_TYPE_PCIE) + return miphy28lp_wait_compensation(miphy_phy); + + return 0; +} + +static inline void miphy28_usb3_miphy_reset(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* MIPHY Reset */ + writeb_relaxed(RST_APPLI_SW, base + MIPHY_CONF_RESET); + writeb_relaxed(0x00, base + MIPHY_CONF_RESET); + writeb_relaxed(RST_COMP_SW, base + MIPHY_RESET); + + val = RST_COMP_SW | RST_PLL_SW; + writeb_relaxed(val, base + MIPHY_RESET); + + writeb_relaxed(0x00, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(0x1e, base + MIPHY_PLL_CLKREF_FREQ); + writeb_relaxed(COMP_START, base + MIPHY_COMP_FSM_1); + writeb_relaxed(RST_PLL_SW, base + MIPHY_RESET); + writeb_relaxed(0x00, base + MIPHY_RESET); + writeb_relaxed(START_ACT_FILT, base + MIPHY_PLL_COMMON_MISC_2); + writeb_relaxed(0x00, base + MIPHY_CONF); + writeb_relaxed(0x00, base + MIPHY_BOUNDARY_1); + writeb_relaxed(0x00, base + MIPHY_TST_BIAS_BOOST_2); + writeb_relaxed(0x00, base + MIPHY_CONF); + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + writeb_relaxed(0xa5, base + MIPHY_DEBUG_BUS); + writeb_relaxed(0x00, base + MIPHY_CONF); +} + +static void miphy_sata_tune_ssc(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Compensate Tx impedance to avoid out of range values */ + /* + * Enable the SSC on PLL for all banks + * SSC Modulation @ 31 KHz and 4000 ppm modulation amp + */ + val = readb_relaxed(base + MIPHY_BOUNDARY_2); + val |= SSC_EN_SW; + writeb_relaxed(val, base + MIPHY_BOUNDARY_2); + + val = readb_relaxed(base + MIPHY_BOUNDARY_SEL); + val |= SSC_SEL; + writeb_relaxed(val, base + MIPHY_BOUNDARY_SEL); + + for (val = 0; val < MIPHY_SATA_BANK_NB; val++) { + writeb_relaxed(val, base + MIPHY_CONF); + + /* Add value to each reference clock cycle */ + /* and define the period length of the SSC */ + writeb_relaxed(0x3c, base + MIPHY_PLL_SBR_2); + writeb_relaxed(0x6c, base + MIPHY_PLL_SBR_3); + writeb_relaxed(0x81, base + MIPHY_PLL_SBR_4); + + /* Clear any previous request */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* requests the PLL to take in account new parameters */ + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + + /* To be sure there is no other pending requests */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + } +} + +static void miphy_pcie_tune_ssc(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Compensate Tx impedance to avoid out of range values */ + /* + * Enable the SSC on PLL for all banks + * SSC Modulation @ 31 KHz and 4000 ppm modulation amp + */ + val = readb_relaxed(base + MIPHY_BOUNDARY_2); + val |= SSC_EN_SW; + writeb_relaxed(val, base + MIPHY_BOUNDARY_2); + + val = readb_relaxed(base + MIPHY_BOUNDARY_SEL); + val |= SSC_SEL; + writeb_relaxed(val, base + MIPHY_BOUNDARY_SEL); + + for (val = 0; val < MIPHY_PCIE_BANK_NB; val++) { + writeb_relaxed(val, base + MIPHY_CONF); + + /* Validate Step component */ + writeb_relaxed(0x69, base + MIPHY_PLL_SBR_3); + writeb_relaxed(0x21, base + MIPHY_PLL_SBR_4); + + /* Validate Period component */ + writeb_relaxed(0x3c, base + MIPHY_PLL_SBR_2); + writeb_relaxed(0x21, base + MIPHY_PLL_SBR_4); + + /* Clear any previous request */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* requests the PLL to take in account new parameters */ + writeb_relaxed(SET_NEW_CHANGE, base + MIPHY_PLL_SBR_1); + + /* To be sure there is no other pending requests */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + } +} + +static inline void miphy_tune_tx_impedance(struct miphy28lp_phy *miphy_phy) +{ + /* Compensate Tx impedance to avoid out of range values */ + writeb_relaxed(0x02, miphy_phy->base + MIPHY_COMP_POSTP); +} + +static inline int miphy28lp_configure_sata(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int err; + u8 val; + + /* Putting Macro in reset */ + miphy28lp_set_reset(miphy_phy); + + /* PLL calibration */ + miphy28lp_pll_calibration(miphy_phy, &sata_pll_ratio); + + /* Banked settings Gen1/Gen2/Gen3 */ + miphy28lp_sata_config_gen(miphy_phy); + + /* Power control */ + /* Input bridge enable, manual input bridge control */ + writeb_relaxed(0x21, base + MIPHY_RX_POWER_CTRL_1); + + /* Macro out of reset */ + writeb_relaxed(0x00, base + MIPHY_CONF_RESET); + + /* Poll for HFC ready after reset release */ + /* Compensation measurement */ + err = miphy28lp_compensation(miphy_phy, &sata_pll_ratio); + if (err) + return err; + + if (miphy_phy->px_rx_pol_inv) { + /* Invert Rx polarity */ + val = readb_relaxed(miphy_phy->base + MIPHY_CONTROL); + val |= PX_RX_POL; + writeb_relaxed(val, miphy_phy->base + MIPHY_CONTROL); + } + + if (miphy_phy->ssc) + miphy_sata_tune_ssc(miphy_phy); + + if (miphy_phy->tx_impedance) + miphy_tune_tx_impedance(miphy_phy); + + return 0; +} + +static inline int miphy28lp_configure_pcie(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + int err; + + /* Putting Macro in reset */ + miphy28lp_set_reset(miphy_phy); + + /* PLL calibration */ + miphy28lp_pll_calibration(miphy_phy, &pcie_pll_ratio); + + /* Banked settings Gen1/Gen2 */ + miphy28lp_pcie_config_gen(miphy_phy); + + /* Power control */ + /* Input bridge enable, manual input bridge control */ + writeb_relaxed(0x21, base + MIPHY_RX_POWER_CTRL_1); + + /* Macro out of reset */ + writeb_relaxed(0x00, base + MIPHY_CONF_RESET); + + /* Poll for HFC ready after reset release */ + /* Compensation measurement */ + err = miphy28lp_compensation(miphy_phy, &pcie_pll_ratio); + if (err) + return err; + + if (miphy_phy->ssc) + miphy_pcie_tune_ssc(miphy_phy); + + if (miphy_phy->tx_impedance) + miphy_tune_tx_impedance(miphy_phy); + + return 0; +} + + +static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy) +{ + void __iomem *base = miphy_phy->base; + u8 val; + + /* Putting Macro in reset */ + miphy28lp_set_reset(miphy_phy); + + /* PLL calibration */ + miphy28lp_pll_calibration(miphy_phy, &usb3_pll_ratio); + + /* Writing The Speed Rate */ + writeb_relaxed(0x00, base + MIPHY_CONF); + + val = RX_SPDSEL_20DEC | TX_SPDSEL_20DEC; + writeb_relaxed(val, base + MIPHY_SPEED); + + /* RX Channel compensation and calibration */ + writeb_relaxed(0x1c, base + MIPHY_RX_LOCK_SETTINGS_OPT); + writeb_relaxed(0x51, base + MIPHY_RX_CAL_CTRL_1); + writeb_relaxed(0x70, base + MIPHY_RX_CAL_CTRL_2); + + val = OFFSET_COMPENSATION_EN | VGA_OFFSET_POLARITY | + CAL_OFFSET_THRESHOLD_64 | CAL_OFFSET_VGA_64; + writeb_relaxed(val, base + MIPHY_RX_CAL_OFFSET_CTRL); + writeb_relaxed(0x22, base + MIPHY_RX_CAL_VGA_STEP); + writeb_relaxed(0x0e, base + MIPHY_RX_CAL_OPT_LENGTH); + + val = EQ_DC_GAIN | VGA_GAIN; + writeb_relaxed(val, base + MIPHY_RX_BUFFER_CTRL); + writeb_relaxed(0x78, base + MIPHY_RX_EQU_GAIN_1); + writeb_relaxed(0x1b, base + MIPHY_SYNCHAR_CONTROL); + + /* TX compensation offset to re-center TX impedance */ + writeb_relaxed(0x02, base + MIPHY_COMP_POSTP); + + /* Enable GENSEL_SEL and SSC */ + /* TX_SEL=0 swing preemp forced by pipe registres */ + val = SSC_SEL | GENSEL_SEL; + writeb_relaxed(val, base + MIPHY_BOUNDARY_SEL); + + /* MIPHY Bias boost */ + writeb_relaxed(0x00, base + MIPHY_BIAS_BOOST_1); + writeb_relaxed(0xa7, base + MIPHY_BIAS_BOOST_2); + + /* SSC modulation */ + writeb_relaxed(SSC_EN_SW, base + MIPHY_BOUNDARY_2); + + /* MIPHY TX control */ + writeb_relaxed(0x00, base + MIPHY_CONF); + + /* Validate Step component */ + writeb_relaxed(0x5a, base + MIPHY_PLL_SBR_3); + writeb_relaxed(0xa0, base + MIPHY_PLL_SBR_4); + + /* Validate Period component */ + writeb_relaxed(0x3c, base + MIPHY_PLL_SBR_2); + writeb_relaxed(0xa1, base + MIPHY_PLL_SBR_4); + + /* Clear any previous request */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* requests the PLL to take in account new parameters */ + writeb_relaxed(0x02, base + MIPHY_PLL_SBR_1); + + /* To be sure there is no other pending requests */ + writeb_relaxed(0x00, base + MIPHY_PLL_SBR_1); + + /* Rx PI controller settings */ + writeb_relaxed(0xca, base + MIPHY_RX_K_GAIN); + + /* MIPHY RX input bridge control */ + /* INPUT_BRIDGE_EN_SW=1, manual input bridge control[0]=1 */ + writeb_relaxed(0x21, base + MIPHY_RX_POWER_CTRL_1); + writeb_relaxed(0x29, base + MIPHY_RX_POWER_CTRL_1); + writeb_relaxed(0x1a, base + MIPHY_RX_POWER_CTRL_2); + + /* MIPHY Reset for usb3 */ + miphy28_usb3_miphy_reset(miphy_phy); +} + +static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy) +{ + unsigned long finish = jiffies + 5 * HZ; + u8 mask = HFC_PLL | HFC_RDY; + u8 val; + + /* + * For PCIe and USB3 check only that PLL and HFC are ready + * For SATA check also that phy is ready! + */ + if (miphy_phy->type == PHY_TYPE_SATA) + mask |= PHY_RDY; + + do { + val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1); + if ((val & mask) != mask) + cpu_relax(); + else + return 0; + } while (!time_after_eq(jiffies, finish)); + + return -EBUSY; +} + +static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + unsigned long finish = jiffies + 5 * HZ; + u32 val; + + if (!miphy_phy->osc_rdy) + return 0; + + if (!miphy_phy->syscfg_reg[SYSCFG_STATUS]) + return -EINVAL; + + do { + regmap_read(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_STATUS], &val); + + if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY) + cpu_relax(); + else + return 0; + } while (!time_after_eq(jiffies, finish)); + + return -EBUSY; +} + +static int miphy28lp_get_resource_byname(struct device_node *child, + char *rname, struct resource *res) +{ + int index; + + index = of_property_match_string(child, "reg-names", rname); + if (index < 0) + return -ENODEV; + + return of_address_to_resource(child, index, res); +} + +static int miphy28lp_get_one_addr(struct device *dev, + struct device_node *child, char *rname, + void __iomem **base) +{ + struct resource res; + int ret; + + ret = miphy28lp_get_resource_byname(child, rname, &res); + if (!ret) { + *base = devm_ioremap(dev, res.start, resource_size(&res)); + if (!*base) { + dev_err(dev, "failed to ioremap %s address region\n" + , rname); + return -ENOENT; + } + } + + return 0; +} + +/* MiPHY reset and sysconf setup */ +static int miphy28lp_setup(struct miphy28lp_phy *miphy_phy, u32 miphy_val) +{ + int err; + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + + if (!miphy_phy->syscfg_reg[SYSCFG_CTRL]) + return -EINVAL; + + err = reset_control_assert(miphy_phy->miphy_rst); + if (err) { + dev_err(miphy_dev->dev, "unable to bring out of miphy reset\n"); + return err; + } + + if (miphy_phy->osc_force_ext) + miphy_val |= MIPHY_OSC_FORCE_EXT; + + regmap_update_bits(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_CTRL], + MIPHY_CTRL_MASK, miphy_val); + + err = reset_control_deassert(miphy_phy->miphy_rst); + if (err) { + dev_err(miphy_dev->dev, "unable to bring out of miphy reset\n"); + return err; + } + + return miphy_osc_is_ready(miphy_phy); +} + +static int miphy28lp_init_sata(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err, sata_conf = SATA_CTRL_SELECT_SATA; + + if ((!miphy_phy->syscfg_reg[SYSCFG_SATA]) || + (!miphy_phy->syscfg_reg[SYSCFG_PCI]) || + (!miphy_phy->base)) + return -EINVAL; + + dev_info(miphy_dev->dev, "sata-up mode, addr 0x%p\n", miphy_phy->base); + + /* Configure the glue-logic */ + sata_conf |= ((miphy_phy->sata_gen - SATA_GEN1) << SATA_SPDMODE); + + regmap_update_bits(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_SATA], + SATA_CTRL_MASK, sata_conf); + + regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_reg[SYSCFG_PCI], + PCIE_CTRL_MASK, SATA_CTRL_SELECT_PCIE); + + /* MiPHY path and clocking init */ + err = miphy28lp_setup(miphy_phy, MIPHY_CTRL_DEFAULT); + + if (err) { + dev_err(miphy_dev->dev, "SATA phy setup failed\n"); + return err; + } + + /* initialize miphy */ + miphy28lp_configure_sata(miphy_phy); + + return miphy_is_ready(miphy_phy); +} + +static int miphy28lp_init_pcie(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err; + + if ((!miphy_phy->syscfg_reg[SYSCFG_SATA]) || + (!miphy_phy->syscfg_reg[SYSCFG_PCI]) + || (!miphy_phy->base) || (!miphy_phy->pipebase)) + return -EINVAL; + + dev_info(miphy_dev->dev, "pcie-up mode, addr 0x%p\n", miphy_phy->base); + + /* Configure the glue-logic */ + regmap_update_bits(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_SATA], + SATA_CTRL_MASK, SATA_CTRL_SELECT_PCIE); + + regmap_update_bits(miphy_dev->regmap, miphy_phy->syscfg_reg[SYSCFG_PCI], + PCIE_CTRL_MASK, SYSCFG_PCIE_PCIE_VAL); + + /* MiPHY path and clocking init */ + err = miphy28lp_setup(miphy_phy, MIPHY_CTRL_DEFAULT); + + if (err) { + dev_err(miphy_dev->dev, "PCIe phy setup failed\n"); + return err; + } + + /* initialize miphy */ + err = miphy28lp_configure_pcie(miphy_phy); + if (err) + return err; + + /* PIPE Wrapper Configuration */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x104); /* Rise_0 */ + writeb_relaxed(0x61, miphy_phy->pipebase + 0x105); /* Rise_1 */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x108); /* Fall_0 */ + writeb_relaxed(0x61, miphy_phy->pipebase + 0x109); /* Fall-1 */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x10c); /* Threshold_0 */ + writeb_relaxed(0x60, miphy_phy->pipebase + 0x10d); /* Threshold_1 */ + + /* Wait for phy_ready */ + return miphy_is_ready(miphy_phy); +} + +static int miphy28lp_init_usb3(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err; + + if ((!miphy_phy->base) || (!miphy_phy->pipebase)) + return -EINVAL; + + dev_info(miphy_dev->dev, "usb3-up mode, addr 0x%p\n", miphy_phy->base); + + /* MiPHY path and clocking init */ + err = miphy28lp_setup(miphy_phy, MIPHY_CTRL_SYNC_D_EN); + if (err) { + dev_err(miphy_dev->dev, "USB3 phy setup failed\n"); + return err; + } + + /* initialize miphy */ + miphy28lp_configure_usb3(miphy_phy); + + /* PIPE Wrapper Configuration */ + writeb_relaxed(0x68, miphy_phy->pipebase + 0x23); + writeb_relaxed(0x61, miphy_phy->pipebase + 0x24); + writeb_relaxed(0x68, miphy_phy->pipebase + 0x26); + writeb_relaxed(0x61, miphy_phy->pipebase + 0x27); + writeb_relaxed(0x18, miphy_phy->pipebase + 0x29); + writeb_relaxed(0x61, miphy_phy->pipebase + 0x2a); + + /* pipe Wrapper usb3 TX swing de-emph margin PREEMPH[7:4], SWING[3:0] */ + writeb_relaxed(0X67, miphy_phy->pipebase + 0x68); + writeb_relaxed(0x0d, miphy_phy->pipebase + 0x69); + writeb_relaxed(0X67, miphy_phy->pipebase + 0x6a); + writeb_relaxed(0X0d, miphy_phy->pipebase + 0x6b); + writeb_relaxed(0X67, miphy_phy->pipebase + 0x6c); + writeb_relaxed(0X0d, miphy_phy->pipebase + 0x6d); + writeb_relaxed(0X67, miphy_phy->pipebase + 0x6e); + writeb_relaxed(0X0d, miphy_phy->pipebase + 0x6f); + + return miphy_is_ready(miphy_phy); +} + +static int miphy28lp_init(struct phy *phy) +{ + struct miphy28lp_phy *miphy_phy = phy_get_drvdata(phy); + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int ret; + + mutex_lock(&miphy_dev->miphy_mutex); + + switch (miphy_phy->type) { + + case PHY_TYPE_SATA: + ret = miphy28lp_init_sata(miphy_phy); + break; + case PHY_TYPE_PCIE: + ret = miphy28lp_init_pcie(miphy_phy); + break; + case PHY_TYPE_USB3: + ret = miphy28lp_init_usb3(miphy_phy); + break; + default: + ret = -EINVAL; + break; + } + + mutex_unlock(&miphy_dev->miphy_mutex); + + return ret; +} + +static int miphy28lp_get_addr(struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + struct device_node *phynode = miphy_phy->phy->dev.of_node; + int err; + + if ((miphy_phy->type != PHY_TYPE_SATA) && + (miphy_phy->type != PHY_TYPE_PCIE) && + (miphy_phy->type != PHY_TYPE_USB3)) { + return -EINVAL; + } + + err = miphy28lp_get_one_addr(miphy_dev->dev, phynode, + PHY_TYPE_name[miphy_phy->type - PHY_TYPE_SATA], + &miphy_phy->base); + if (err) + return err; + + if ((miphy_phy->type == PHY_TYPE_PCIE) || + (miphy_phy->type == PHY_TYPE_USB3)) { + err = miphy28lp_get_one_addr(miphy_dev->dev, phynode, "pipew", + &miphy_phy->pipebase); + if (err) + return err; + } + + return 0; +} + +static struct phy *miphy28lp_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct miphy28lp_dev *miphy_dev = dev_get_drvdata(dev); + struct miphy28lp_phy *miphy_phy = NULL; + struct device_node *phynode = args->np; + int ret, index = 0; + + if (!of_device_is_available(phynode)) { + dev_warn(dev, "Requested PHY is disabled\n"); + return ERR_PTR(-ENODEV); + } + + if (args->args_count != 1) { + dev_err(dev, "Invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < miphy_dev->nphys; index++) + if (phynode == miphy_dev->phys[index]->phy->dev.of_node) { + miphy_phy = miphy_dev->phys[index]; + break; + } + + if (!miphy_phy) { + dev_err(dev, "Failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + miphy_phy->type = args->args[0]; + + ret = miphy28lp_get_addr(miphy_phy); + if (ret < 0) + return ERR_PTR(ret); + + return miphy_phy->phy; +} + +static struct phy_ops miphy28lp_ops = { + .init = miphy28lp_init, + .owner = THIS_MODULE, +}; + +static int miphy28lp_probe_resets(struct device_node *node, + struct miphy28lp_phy *miphy_phy) +{ + struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; + int err; + + miphy_phy->miphy_rst = of_reset_control_get(node, "miphy-sw-rst"); + + if (IS_ERR(miphy_phy->miphy_rst)) { + dev_err(miphy_dev->dev, + "miphy soft reset control not defined\n"); + return PTR_ERR(miphy_phy->miphy_rst); + } + + err = reset_control_deassert(miphy_phy->miphy_rst); + if (err) { + dev_err(miphy_dev->dev, "unable to bring out of miphy reset\n"); + return err; + } + + return 0; +} + +static int miphy28lp_of_probe(struct device_node *np, + struct miphy28lp_phy *miphy_phy) +{ + int i; + u32 ctrlreg; + + miphy_phy->osc_force_ext = + of_property_read_bool(np, "st,osc-force-ext"); + + miphy_phy->osc_rdy = of_property_read_bool(np, "st,osc-rdy"); + + miphy_phy->px_rx_pol_inv = + of_property_read_bool(np, "st,px_rx_pol_inv"); + + miphy_phy->ssc = of_property_read_bool(np, "st,ssc-on"); + + miphy_phy->tx_impedance = + of_property_read_bool(np, "st,tx-impedance-comp"); + + of_property_read_u32(np, "st,sata-gen", &miphy_phy->sata_gen); + if (!miphy_phy->sata_gen) + miphy_phy->sata_gen = SATA_GEN1; + + for (i = 0; i < SYSCFG_REG_MAX; i++) { + if (!of_property_read_u32_index(np, "st,syscfg", i, &ctrlreg)) + miphy_phy->syscfg_reg[i] = ctrlreg; + } + + return 0; +} + +static int miphy28lp_probe(struct platform_device *pdev) +{ + struct device_node *child, *np = pdev->dev.of_node; + struct miphy28lp_dev *miphy_dev; + struct phy_provider *provider; + struct phy *phy; + int ret, port = 0; + + miphy_dev = devm_kzalloc(&pdev->dev, sizeof(*miphy_dev), GFP_KERNEL); + if (!miphy_dev) + return -ENOMEM; + + miphy_dev->nphys = of_get_child_count(np); + miphy_dev->phys = devm_kcalloc(&pdev->dev, miphy_dev->nphys, + sizeof(*miphy_dev->phys), GFP_KERNEL); + if (!miphy_dev->phys) + return -ENOMEM; + + miphy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(miphy_dev->regmap)) { + dev_err(miphy_dev->dev, "No syscfg phandle specified\n"); + return PTR_ERR(miphy_dev->regmap); + } + + miphy_dev->dev = &pdev->dev; + + dev_set_drvdata(&pdev->dev, miphy_dev); + + mutex_init(&miphy_dev->miphy_mutex); + + for_each_child_of_node(np, child) { + struct miphy28lp_phy *miphy_phy; + + miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy), + GFP_KERNEL); + if (!miphy_phy) + return -ENOMEM; + + miphy_dev->phys[port] = miphy_phy; + + phy = devm_phy_create(&pdev->dev, child, &miphy28lp_ops); + if (IS_ERR(phy)) { + dev_err(&pdev->dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + miphy_dev->phys[port]->phy = phy; + miphy_dev->phys[port]->phydev = miphy_dev; + + ret = miphy28lp_of_probe(child, miphy_phy); + if (ret) + return ret; + + ret = miphy28lp_probe_resets(child, miphy_dev->phys[port]); + if (ret) + return ret; + + phy_set_drvdata(phy, miphy_dev->phys[port]); + port++; + + } + + provider = devm_of_phy_provider_register(&pdev->dev, miphy28lp_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id miphy28lp_of_match[] = { + {.compatible = "st,miphy28lp-phy", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, miphy28lp_of_match); + +static struct platform_driver miphy28lp_driver = { + .probe = miphy28lp_probe, + .driver = { + .name = "miphy28lp-phy", + .owner = THIS_MODULE, + .of_match_table = miphy28lp_of_match, + } +}; + +module_platform_driver(miphy28lp_driver); + +MODULE_AUTHOR("Alexandre Torgue "); +MODULE_DESCRIPTION("STMicroelectronics miphy28lp driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c new file mode 100644 index 000000000..019c2d753 --- /dev/null +++ b/drivers/phy/phy-miphy365x.c @@ -0,0 +1,624 @@ +/* + * Copyright (C) 2014 STMicroelectronics – All Rights Reserved + * + * STMicroelectronics PHY driver MiPHY365 (for SoC STiH416). + * + * Authors: Alexandre Torgue + * Lee Jones + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define HFC_TIMEOUT 100 + +#define SYSCFG_SELECT_SATA_MASK BIT(1) +#define SYSCFG_SELECT_SATA_POS 1 + +/* MiPHY365x register definitions */ +#define RESET_REG 0x00 +#define RST_PLL BIT(1) +#define RST_PLL_CAL BIT(2) +#define RST_RX BIT(4) +#define RST_MACRO BIT(7) + +#define STATUS_REG 0x01 +#define IDLL_RDY BIT(0) +#define PLL_RDY BIT(1) +#define DES_BIT_LOCK BIT(2) +#define DES_SYMBOL_LOCK BIT(3) + +#define CTRL_REG 0x02 +#define TERM_EN BIT(0) +#define PCI_EN BIT(2) +#define DES_BIT_LOCK_EN BIT(3) +#define TX_POL BIT(5) + +#define INT_CTRL_REG 0x03 + +#define BOUNDARY1_REG 0x10 +#define SPDSEL_SEL BIT(0) + +#define BOUNDARY3_REG 0x12 +#define TX_SPDSEL_GEN1_VAL 0 +#define TX_SPDSEL_GEN2_VAL 0x01 +#define TX_SPDSEL_GEN3_VAL 0x02 +#define RX_SPDSEL_GEN1_VAL 0 +#define RX_SPDSEL_GEN2_VAL (0x01 << 3) +#define RX_SPDSEL_GEN3_VAL (0x02 << 3) + +#define PCIE_REG 0x16 + +#define BUF_SEL_REG 0x20 +#define CONF_GEN_SEL_GEN3 0x02 +#define CONF_GEN_SEL_GEN2 0x01 +#define PD_VDDTFILTER BIT(4) + +#define TXBUF1_REG 0x21 +#define SWING_VAL 0x04 +#define SWING_VAL_GEN1 0x03 +#define PREEMPH_VAL (0x3 << 5) + +#define TXBUF2_REG 0x22 +#define TXSLEW_VAL 0x2 +#define TXSLEW_VAL_GEN1 0x4 + +#define RXBUF_OFFSET_CTRL_REG 0x23 + +#define RXBUF_REG 0x25 +#define SDTHRES_VAL 0x01 +#define EQ_ON3 (0x03 << 4) +#define EQ_ON1 (0x01 << 4) + +#define COMP_CTRL1_REG 0x40 +#define START_COMSR BIT(0) +#define START_COMZC BIT(1) +#define COMSR_DONE BIT(2) +#define COMZC_DONE BIT(3) +#define COMP_AUTO_LOAD BIT(4) + +#define COMP_CTRL2_REG 0x41 +#define COMP_2MHZ_RAT_GEN1 0x1e +#define COMP_2MHZ_RAT 0xf + +#define COMP_CTRL3_REG 0x42 +#define COMSR_COMP_REF 0x33 + +#define COMP_IDLL_REG 0x47 +#define COMZC_IDLL 0x2a + +#define PLL_CTRL1_REG 0x50 +#define PLL_START_CAL BIT(0) +#define BUF_EN BIT(2) +#define SYNCHRO_TX BIT(3) +#define SSC_EN BIT(6) +#define CONFIG_PLL BIT(7) + +#define PLL_CTRL2_REG 0x51 +#define BYPASS_PLL_CAL BIT(1) + +#define PLL_RAT_REG 0x52 + +#define PLL_SSC_STEP_MSB_REG 0x56 +#define PLL_SSC_STEP_MSB_VAL 0x03 + +#define PLL_SSC_STEP_LSB_REG 0x57 +#define PLL_SSC_STEP_LSB_VAL 0x63 + +#define PLL_SSC_PER_MSB_REG 0x58 +#define PLL_SSC_PER_MSB_VAL 0 + +#define PLL_SSC_PER_LSB_REG 0x59 +#define PLL_SSC_PER_LSB_VAL 0xf1 + +#define IDLL_TEST_REG 0x72 +#define START_CLK_HF BIT(6) + +#define DES_BITLOCK_REG 0x86 +#define BIT_LOCK_LEVEL 0x01 +#define BIT_LOCK_CNT_512 (0x03 << 5) + +struct miphy365x_phy { + struct phy *phy; + void __iomem *base; + bool pcie_tx_pol_inv; + bool sata_tx_pol_inv; + u32 sata_gen; + u32 ctrlreg; + u8 type; +}; + +struct miphy365x_dev { + struct device *dev; + struct regmap *regmap; + struct mutex miphy_mutex; + struct miphy365x_phy **phys; + int nphys; +}; + +/* + * These values are represented in Device tree. They are considered to be ABI + * and although they can be extended any existing values must not change. + */ +enum miphy_sata_gen { + SATA_GEN1 = 1, + SATA_GEN2, + SATA_GEN3 +}; + +static u8 rx_tx_spd[] = { + 0, /* GEN0 doesn't exist. */ + TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL, + TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL, + TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL +}; + +/* + * This function selects the system configuration, + * either two SATA, one SATA and one PCIe, or two PCIe lanes. + */ +static int miphy365x_set_path(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + bool sata = (miphy_phy->type == PHY_TYPE_SATA); + + return regmap_update_bits(miphy_dev->regmap, + miphy_phy->ctrlreg, + SYSCFG_SELECT_SATA_MASK, + sata << SYSCFG_SELECT_SATA_POS); +} + +static int miphy365x_init_pcie_port(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + u8 val; + + if (miphy_phy->pcie_tx_pol_inv) { + /* Invert Tx polarity and clear pci_txdetect_pol bit */ + val = TERM_EN | PCI_EN | DES_BIT_LOCK_EN | TX_POL; + writeb_relaxed(val, miphy_phy->base + CTRL_REG); + writeb_relaxed(0x00, miphy_phy->base + PCIE_REG); + } + + return 0; +} + +static inline int miphy365x_hfc_not_rdy(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT); + u8 mask = IDLL_RDY | PLL_RDY; + u8 regval; + + do { + regval = readb_relaxed(miphy_phy->base + STATUS_REG); + if (!(regval & mask)) + return 0; + + usleep_range(2000, 2500); + } while (time_before(jiffies, timeout)); + + dev_err(miphy_dev->dev, "HFC ready timeout!\n"); + return -EBUSY; +} + +static inline int miphy365x_rdy(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(HFC_TIMEOUT); + u8 mask = IDLL_RDY | PLL_RDY; + u8 regval; + + do { + regval = readb_relaxed(miphy_phy->base + STATUS_REG); + if ((regval & mask) == mask) + return 0; + + usleep_range(2000, 2500); + } while (time_before(jiffies, timeout)); + + dev_err(miphy_dev->dev, "PHY not ready timeout!\n"); + return -EBUSY; +} + +static inline void miphy365x_set_comp(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + u8 val, mask; + + if (miphy_phy->sata_gen == SATA_GEN1) + writeb_relaxed(COMP_2MHZ_RAT_GEN1, + miphy_phy->base + COMP_CTRL2_REG); + else + writeb_relaxed(COMP_2MHZ_RAT, + miphy_phy->base + COMP_CTRL2_REG); + + if (miphy_phy->sata_gen != SATA_GEN3) { + writeb_relaxed(COMSR_COMP_REF, + miphy_phy->base + COMP_CTRL3_REG); + /* + * Force VCO current to value defined by address 0x5A + * and disable PCIe100Mref bit + * Enable auto load compensation for pll_i_bias + */ + writeb_relaxed(BYPASS_PLL_CAL, miphy_phy->base + PLL_CTRL2_REG); + writeb_relaxed(COMZC_IDLL, miphy_phy->base + COMP_IDLL_REG); + } + + /* + * Force restart compensation and enable auto load + * for Comzc_Tx, Comzc_Rx and Comsr on macro + */ + val = START_COMSR | START_COMZC | COMP_AUTO_LOAD; + writeb_relaxed(val, miphy_phy->base + COMP_CTRL1_REG); + + mask = COMSR_DONE | COMZC_DONE; + while ((readb_relaxed(miphy_phy->base + COMP_CTRL1_REG) & mask) != mask) + cpu_relax(); +} + +static inline void miphy365x_set_ssc(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + u8 val; + + /* + * SSC Settings. SSC will be enabled through Link + * SSC Ampl. = 0.4% + * SSC Freq = 31KHz + */ + writeb_relaxed(PLL_SSC_STEP_MSB_VAL, + miphy_phy->base + PLL_SSC_STEP_MSB_REG); + writeb_relaxed(PLL_SSC_STEP_LSB_VAL, + miphy_phy->base + PLL_SSC_STEP_LSB_REG); + writeb_relaxed(PLL_SSC_PER_MSB_VAL, + miphy_phy->base + PLL_SSC_PER_MSB_REG); + writeb_relaxed(PLL_SSC_PER_LSB_VAL, + miphy_phy->base + PLL_SSC_PER_LSB_REG); + + /* SSC Settings complete */ + if (miphy_phy->sata_gen == SATA_GEN1) { + val = PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL; + writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG); + } else { + val = SSC_EN | PLL_START_CAL | BUF_EN | SYNCHRO_TX | CONFIG_PLL; + writeb_relaxed(val, miphy_phy->base + PLL_CTRL1_REG); + } +} + +static int miphy365x_init_sata_port(struct miphy365x_phy *miphy_phy, + struct miphy365x_dev *miphy_dev) +{ + int ret; + u8 val; + + /* + * Force PHY macro reset, PLL calibration reset, PLL reset + * and assert Deserializer Reset + */ + val = RST_PLL | RST_PLL_CAL | RST_RX | RST_MACRO; + writeb_relaxed(val, miphy_phy->base + RESET_REG); + + if (miphy_phy->sata_tx_pol_inv) + writeb_relaxed(TX_POL, miphy_phy->base + CTRL_REG); + + /* + * Force macro1 to use rx_lspd, tx_lspd + * Force Rx_Clock on first I-DLL phase + * Force Des in HP mode on macro, rx_lspd, tx_lspd for Gen2/3 + */ + writeb_relaxed(SPDSEL_SEL, miphy_phy->base + BOUNDARY1_REG); + writeb_relaxed(START_CLK_HF, miphy_phy->base + IDLL_TEST_REG); + val = rx_tx_spd[miphy_phy->sata_gen]; + writeb_relaxed(val, miphy_phy->base + BOUNDARY3_REG); + + /* Wait for HFC_READY = 0 */ + ret = miphy365x_hfc_not_rdy(miphy_phy, miphy_dev); + if (ret) + return ret; + + /* Compensation Recalibration */ + miphy365x_set_comp(miphy_phy, miphy_dev); + + switch (miphy_phy->sata_gen) { + case SATA_GEN3: + /* + * TX Swing target 550-600mv peak to peak diff + * Tx Slew target 90-110ps rising/falling time + * Rx Eq ON3, Sigdet threshold SDTH1 + */ + val = PD_VDDTFILTER | CONF_GEN_SEL_GEN3; + writeb_relaxed(val, miphy_phy->base + BUF_SEL_REG); + val = SWING_VAL | PREEMPH_VAL; + writeb_relaxed(val, miphy_phy->base + TXBUF1_REG); + writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG); + writeb_relaxed(0x00, miphy_phy->base + RXBUF_OFFSET_CTRL_REG); + val = SDTHRES_VAL | EQ_ON3; + writeb_relaxed(val, miphy_phy->base + RXBUF_REG); + break; + case SATA_GEN2: + /* + * conf gen sel=0x1 to program Gen2 banked registers + * VDDT filter ON + * Tx Swing target 550-600mV peak-to-peak diff + * Tx Slew target 90-110 ps rising/falling time + * RX Equalization ON1, Sigdet threshold SDTH1 + */ + writeb_relaxed(CONF_GEN_SEL_GEN2, + miphy_phy->base + BUF_SEL_REG); + writeb_relaxed(SWING_VAL, miphy_phy->base + TXBUF1_REG); + writeb_relaxed(TXSLEW_VAL, miphy_phy->base + TXBUF2_REG); + val = SDTHRES_VAL | EQ_ON1; + writeb_relaxed(val, miphy_phy->base + RXBUF_REG); + break; + case SATA_GEN1: + /* + * conf gen sel = 00b to program Gen1 banked registers + * VDDT filter ON + * Tx Swing target 500-550mV peak-to-peak diff + * Tx Slew target120-140 ps rising/falling time + */ + writeb_relaxed(PD_VDDTFILTER, miphy_phy->base + BUF_SEL_REG); + writeb_relaxed(SWING_VAL_GEN1, miphy_phy->base + TXBUF1_REG); + writeb_relaxed(TXSLEW_VAL_GEN1, miphy_phy->base + TXBUF2_REG); + break; + default: + break; + } + + /* Force Macro1 in partial mode & release pll cal reset */ + writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG); + usleep_range(100, 150); + + miphy365x_set_ssc(miphy_phy, miphy_dev); + + /* Wait for phy_ready */ + ret = miphy365x_rdy(miphy_phy, miphy_dev); + if (ret) + return ret; + + /* + * Enable macro1 to use rx_lspd & tx_lspd + * Release Rx_Clock on first I-DLL phase on macro1 + * Assert deserializer reset + * des_bit_lock_en is set + * bit lock detection strength + * Deassert deserializer reset + */ + writeb_relaxed(0x00, miphy_phy->base + BOUNDARY1_REG); + writeb_relaxed(0x00, miphy_phy->base + IDLL_TEST_REG); + writeb_relaxed(RST_RX, miphy_phy->base + RESET_REG); + val = miphy_phy->sata_tx_pol_inv ? + (TX_POL | DES_BIT_LOCK_EN) : DES_BIT_LOCK_EN; + writeb_relaxed(val, miphy_phy->base + CTRL_REG); + + val = BIT_LOCK_CNT_512 | BIT_LOCK_LEVEL; + writeb_relaxed(val, miphy_phy->base + DES_BITLOCK_REG); + writeb_relaxed(0x00, miphy_phy->base + RESET_REG); + + return 0; +} + +static int miphy365x_init(struct phy *phy) +{ + struct miphy365x_phy *miphy_phy = phy_get_drvdata(phy); + struct miphy365x_dev *miphy_dev = dev_get_drvdata(phy->dev.parent); + int ret = 0; + + mutex_lock(&miphy_dev->miphy_mutex); + + ret = miphy365x_set_path(miphy_phy, miphy_dev); + if (ret) { + mutex_unlock(&miphy_dev->miphy_mutex); + return ret; + } + + /* Initialise Miphy for PCIe or SATA */ + if (miphy_phy->type == PHY_TYPE_PCIE) + ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev); + else + ret = miphy365x_init_sata_port(miphy_phy, miphy_dev); + + mutex_unlock(&miphy_dev->miphy_mutex); + + return ret; +} + +int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy, + int index) +{ + struct device_node *phynode = miphy_phy->phy->dev.of_node; + const char *name; + int type = miphy_phy->type; + int ret; + + ret = of_property_read_string_index(phynode, "reg-names", index, &name); + if (ret) { + dev_err(dev, "no reg-names property not found\n"); + return ret; + } + + if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) || + (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE))) + return 0; + + miphy_phy->base = of_iomap(phynode, index); + if (!miphy_phy->base) { + dev_err(dev, "Failed to map %s\n", phynode->full_name); + return -EINVAL; + } + + return 0; +} + +static struct phy *miphy365x_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct miphy365x_dev *miphy_dev = dev_get_drvdata(dev); + struct miphy365x_phy *miphy_phy = NULL; + struct device_node *phynode = args->np; + int ret, index; + + if (!of_device_is_available(phynode)) { + dev_warn(dev, "Requested PHY is disabled\n"); + return ERR_PTR(-ENODEV); + } + + if (args->args_count != 1) { + dev_err(dev, "Invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < miphy_dev->nphys; index++) + if (phynode == miphy_dev->phys[index]->phy->dev.of_node) { + miphy_phy = miphy_dev->phys[index]; + break; + } + + if (!miphy_phy) { + dev_err(dev, "Failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + miphy_phy->type = args->args[0]; + + if (!(miphy_phy->type == PHY_TYPE_SATA || + miphy_phy->type == PHY_TYPE_PCIE)) { + dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type); + return ERR_PTR(-EINVAL); + } + + /* Each port handles SATA and PCIE - third entry is always sysconf. */ + for (index = 0; index < 3; index++) { + ret = miphy365x_get_addr(dev, miphy_phy, index); + if (ret < 0) + return ERR_PTR(ret); + } + + return miphy_phy->phy; +} + +static struct phy_ops miphy365x_ops = { + .init = miphy365x_init, + .owner = THIS_MODULE, +}; + +static int miphy365x_of_probe(struct device_node *phynode, + struct miphy365x_phy *miphy_phy) +{ + of_property_read_u32(phynode, "st,sata-gen", &miphy_phy->sata_gen); + if (!miphy_phy->sata_gen) + miphy_phy->sata_gen = SATA_GEN1; + + miphy_phy->pcie_tx_pol_inv = + of_property_read_bool(phynode, "st,pcie-tx-pol-inv"); + + miphy_phy->sata_tx_pol_inv = + of_property_read_bool(phynode, "st,sata-tx-pol-inv"); + + return 0; +} + +static int miphy365x_probe(struct platform_device *pdev) +{ + struct device_node *child, *np = pdev->dev.of_node; + struct miphy365x_dev *miphy_dev; + struct phy_provider *provider; + struct phy *phy; + int ret, port = 0; + + miphy_dev = devm_kzalloc(&pdev->dev, sizeof(*miphy_dev), GFP_KERNEL); + if (!miphy_dev) + return -ENOMEM; + + miphy_dev->nphys = of_get_child_count(np); + miphy_dev->phys = devm_kcalloc(&pdev->dev, miphy_dev->nphys, + sizeof(*miphy_dev->phys), GFP_KERNEL); + if (!miphy_dev->phys) + return -ENOMEM; + + miphy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(miphy_dev->regmap)) { + dev_err(miphy_dev->dev, "No syscfg phandle specified\n"); + return PTR_ERR(miphy_dev->regmap); + } + + miphy_dev->dev = &pdev->dev; + + dev_set_drvdata(&pdev->dev, miphy_dev); + + mutex_init(&miphy_dev->miphy_mutex); + + for_each_child_of_node(np, child) { + struct miphy365x_phy *miphy_phy; + + miphy_phy = devm_kzalloc(&pdev->dev, sizeof(*miphy_phy), + GFP_KERNEL); + if (!miphy_phy) + return -ENOMEM; + + miphy_dev->phys[port] = miphy_phy; + + phy = devm_phy_create(&pdev->dev, child, &miphy365x_ops); + if (IS_ERR(phy)) { + dev_err(&pdev->dev, "failed to create PHY\n"); + return PTR_ERR(phy); + } + + miphy_dev->phys[port]->phy = phy; + + ret = miphy365x_of_probe(child, miphy_phy); + if (ret) + return ret; + + phy_set_drvdata(phy, miphy_dev->phys[port]); + + port++; + /* sysconfig offsets are indexed from 1 */ + ret = of_property_read_u32_index(np, "st,syscfg", port, + &miphy_phy->ctrlreg); + if (ret) { + dev_err(&pdev->dev, "No sysconfig offset found\n"); + return ret; + } + } + + provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate); + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id miphy365x_of_match[] = { + { .compatible = "st,miphy365x-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, miphy365x_of_match); + +static struct platform_driver miphy365x_driver = { + .probe = miphy365x_probe, + .driver = { + .name = "miphy365x-phy", + .of_match_table = miphy365x_of_match, + } +}; +module_platform_driver(miphy365x_driver); + +MODULE_AUTHOR("Alexandre Torgue "); +MODULE_DESCRIPTION("STMicroelectronics miphy365x driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/phy-mvebu-sata.c new file mode 100644 index 000000000..03b94f92e --- /dev/null +++ b/drivers/phy/phy-mvebu-sata.c @@ -0,0 +1,138 @@ +/* + * phy-mvebu-sata.c: SATA Phy driver for the Marvell mvebu SoCs. + * + * Copyright (C) 2013 Andrew Lunn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +struct priv { + struct clk *clk; + void __iomem *base; +}; + +#define SATA_PHY_MODE_2 0x0330 +#define MODE_2_FORCE_PU_TX BIT(0) +#define MODE_2_FORCE_PU_RX BIT(1) +#define MODE_2_PU_PLL BIT(2) +#define MODE_2_PU_IVREF BIT(3) +#define SATA_IF_CTRL 0x0050 +#define CTRL_PHY_SHUTDOWN BIT(9) + +static int phy_mvebu_sata_power_on(struct phy *phy) +{ + struct priv *priv = phy_get_drvdata(phy); + u32 reg; + + clk_prepare_enable(priv->clk); + + /* Enable PLL and IVREF */ + reg = readl(priv->base + SATA_PHY_MODE_2); + reg |= (MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX | + MODE_2_PU_PLL | MODE_2_PU_IVREF); + writel(reg , priv->base + SATA_PHY_MODE_2); + + /* Enable PHY */ + reg = readl(priv->base + SATA_IF_CTRL); + reg &= ~CTRL_PHY_SHUTDOWN; + writel(reg, priv->base + SATA_IF_CTRL); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int phy_mvebu_sata_power_off(struct phy *phy) +{ + struct priv *priv = phy_get_drvdata(phy); + u32 reg; + + clk_prepare_enable(priv->clk); + + /* Disable PLL and IVREF */ + reg = readl(priv->base + SATA_PHY_MODE_2); + reg &= ~(MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX | + MODE_2_PU_PLL | MODE_2_PU_IVREF); + writel(reg, priv->base + SATA_PHY_MODE_2); + + /* Disable PHY */ + reg = readl(priv->base + SATA_IF_CTRL); + reg |= CTRL_PHY_SHUTDOWN; + writel(reg, priv->base + SATA_IF_CTRL); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +static struct phy_ops phy_mvebu_sata_ops = { + .power_on = phy_mvebu_sata_power_on, + .power_off = phy_mvebu_sata_power_off, + .owner = THIS_MODULE, +}; + +static int phy_mvebu_sata_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct resource *res; + struct priv *priv; + struct phy *phy; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->clk = devm_clk_get(&pdev->dev, "sata"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + phy = devm_phy_create(&pdev->dev, NULL, &phy_mvebu_sata_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(&pdev->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + /* The boot loader may of left it on. Turn it off. */ + phy_mvebu_sata_power_off(phy); + + return 0; +} + +static const struct of_device_id phy_mvebu_sata_of_match[] = { + { .compatible = "marvell,mvebu-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_mvebu_sata_of_match); + +static struct platform_driver phy_mvebu_sata_driver = { + .probe = phy_mvebu_sata_probe, + .driver = { + .name = "phy-mvebu-sata", + .of_match_table = phy_mvebu_sata_of_match, + } +}; +module_platform_driver(phy_mvebu_sata_driver); + +MODULE_AUTHOR("Andrew Lunn "); +MODULE_DESCRIPTION("Marvell MVEBU SATA PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c new file mode 100644 index 000000000..e9c41b3fa --- /dev/null +++ b/drivers/phy/phy-omap-control.c @@ -0,0 +1,360 @@ +/* + * omap-control-phy.c - The PHY part of control module. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * omap_control_pcie_pcs - set the PCS delay count + * @dev: the control module device + * @delay: 8 bit delay value + */ +void omap_control_pcie_pcs(struct device *dev, u8 delay) +{ + u32 val; + struct omap_control_phy *control_phy; + + if (IS_ERR(dev) || !dev) { + pr_err("%s: invalid device\n", __func__); + return; + } + + control_phy = dev_get_drvdata(dev); + if (!control_phy) { + dev_err(dev, "%s: invalid control phy device\n", __func__); + return; + } + + if (control_phy->type != OMAP_CTRL_TYPE_PCIE) { + dev_err(dev, "%s: unsupported operation\n", __func__); + return; + } + + val = readl(control_phy->pcie_pcs); + val &= ~(OMAP_CTRL_PCIE_PCS_MASK << + OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT); + val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT); + writel(val, control_phy->pcie_pcs); +} +EXPORT_SYMBOL_GPL(omap_control_pcie_pcs); + +/** + * omap_control_phy_power - power on/off the phy using control module reg + * @dev: the control module device + * @on: 0 or 1, based on powering on or off the PHY + */ +void omap_control_phy_power(struct device *dev, int on) +{ + u32 val; + unsigned long rate; + struct omap_control_phy *control_phy; + + if (IS_ERR(dev) || !dev) { + pr_err("%s: invalid device\n", __func__); + return; + } + + control_phy = dev_get_drvdata(dev); + if (!control_phy) { + dev_err(dev, "%s: invalid control phy device\n", __func__); + return; + } + + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) + return; + + val = readl(control_phy->power); + + switch (control_phy->type) { + case OMAP_CTRL_TYPE_USB2: + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + break; + + case OMAP_CTRL_TYPE_PCIE: + case OMAP_CTRL_TYPE_PIPE3: + rate = clk_get_rate(control_phy->sys_clk); + rate = rate/1000000; + + if (on) { + val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + } + break; + + case OMAP_CTRL_TYPE_DRA7USB2: + if (on) + val &= ~OMAP_CTRL_USB2_PHY_PD; + else + val |= OMAP_CTRL_USB2_PHY_PD; + break; + + case OMAP_CTRL_TYPE_AM437USB2: + if (on) { + val &= ~(AM437X_CTRL_USB2_PHY_PD | + AM437X_CTRL_USB2_OTG_PD); + val |= (AM437X_CTRL_USB2_OTGVDET_EN | + AM437X_CTRL_USB2_OTGSESSEND_EN); + } else { + val &= ~(AM437X_CTRL_USB2_OTGVDET_EN | + AM437X_CTRL_USB2_OTGSESSEND_EN); + val |= (AM437X_CTRL_USB2_PHY_PD | + AM437X_CTRL_USB2_OTG_PD); + } + break; + default: + dev_err(dev, "%s: type %d not recognized\n", + __func__, control_phy->type); + break; + } + + writel(val, control_phy->power); +} +EXPORT_SYMBOL_GPL(omap_control_phy_power); + +/** + * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core that a usb + * device has been connected. + */ +static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); + val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high + * impedance + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core that it has been + * connected to a usb host. + */ +static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~OMAP_CTRL_DEV_SESSEND; + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | + OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high + * impedance + * @ctrl_phy: struct omap_control_phy * + * + * Writes to the mailbox register to notify the usb core it's now in + * disconnected state. + */ +static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy) +{ + u32 val; + + val = readl(ctrl_phy->otghs_control); + val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; + writel(val, ctrl_phy->otghs_control); +} + +/** + * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode + * or device mode or to denote disconnected state + * @dev: the control module device + * @mode: The mode to which usb should be configured + * + * This is an API to write to the mailbox register to notify the usb core that + * a usb device has been connected. + */ +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode) +{ + struct omap_control_phy *ctrl_phy; + + if (IS_ERR(dev) || !dev) + return; + + ctrl_phy = dev_get_drvdata(dev); + if (!ctrl_phy) { + dev_err(dev, "Invalid control phy device\n"); + return; + } + + if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS) + return; + + switch (mode) { + case USB_MODE_HOST: + omap_control_usb_host_mode(ctrl_phy); + break; + case USB_MODE_DEVICE: + omap_control_usb_device_mode(ctrl_phy); + break; + case USB_MODE_DISCONNECT: + omap_control_usb_set_sessionend(ctrl_phy); + break; + default: + dev_vdbg(dev, "invalid omap control usb mode\n"); + } +} +EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); + +static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_phy_type pcie_data = OMAP_CTRL_TYPE_PCIE; +static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; +static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; + +static const struct of_device_id omap_control_phy_id_table[] = { + { + .compatible = "ti,control-phy-otghs", + .data = &otghs_data, + }, + { + .compatible = "ti,control-phy-usb2", + .data = &usb2_data, + }, + { + .compatible = "ti,control-phy-pipe3", + .data = &pipe3_data, + }, + { + .compatible = "ti,control-phy-pcie", + .data = &pcie_data, + }, + { + .compatible = "ti,control-phy-usb2-dra7", + .data = &dra7usb2_data, + }, + { + .compatible = "ti,control-phy-usb2-am437", + .data = &am437usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_control_phy_id_table); + +static int omap_control_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct of_device_id *of_id; + struct omap_control_phy *control_phy; + + of_id = of_match_device(omap_control_phy_id_table, &pdev->dev); + if (!of_id) + return -EINVAL; + + control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy), + GFP_KERNEL); + if (!control_phy) + return -ENOMEM; + + control_phy->dev = &pdev->dev; + control_phy->type = *(enum omap_control_phy_type *)of_id->data; + + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "otghs_control"); + control_phy->otghs_control = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_phy->otghs_control)) + return PTR_ERR(control_phy->otghs_control); + } else { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "power"); + control_phy->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_phy->power)) { + dev_err(&pdev->dev, "Couldn't get power register\n"); + return PTR_ERR(control_phy->power); + } + } + + if (control_phy->type == OMAP_CTRL_TYPE_PIPE3 || + control_phy->type == OMAP_CTRL_TYPE_PCIE) { + control_phy->sys_clk = devm_clk_get(control_phy->dev, + "sys_clkin"); + if (IS_ERR(control_phy->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + } + + if (control_phy->type == OMAP_CTRL_TYPE_PCIE) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "pcie_pcs"); + control_phy->pcie_pcs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_phy->pcie_pcs)) + return PTR_ERR(control_phy->pcie_pcs); + } + + dev_set_drvdata(control_phy->dev, control_phy); + + return 0; +} + +static struct platform_driver omap_control_phy_driver = { + .probe = omap_control_phy_probe, + .driver = { + .name = "omap-control-phy", + .of_match_table = omap_control_phy_id_table, + }, +}; + +static int __init omap_control_phy_init(void) +{ + return platform_driver_register(&omap_control_phy_driver); +} +subsys_initcall(omap_control_phy_init); + +static void __exit omap_control_phy_exit(void) +{ + platform_driver_unregister(&omap_control_phy_driver); +} +module_exit(omap_control_phy_exit); + +MODULE_ALIAS("platform:omap_control_phy"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP Control Module PHY Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c new file mode 100644 index 000000000..c1a468686 --- /dev/null +++ b/drivers/phy/phy-omap-usb2.c @@ -0,0 +1,389 @@ +/* + * omap-usb2.c - USB PHY, talking to musb controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB2PHY_DISCON_BYP_LATCH (1 << 31) +#define USB2PHY_ANA_CONFIG1 0x4c + +/** + * omap_usb2_set_comparator - links the comparator present in the sytem with + * this phy + * @comparator - the companion phy(comparator) for this phy + * + * The phy companion driver should call this API passing the phy_companion + * filled with set_vbus and start_srp to be used by usb phy. + * + * For use by phy companion driver + */ +int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + struct omap_usb *phy; + struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(x)) + return -ENODEV; + + phy = phy_to_omapusb(x); + phy->comparator = comparator; + return 0; +} +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); + +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) +{ + struct omap_usb *phy = phy_to_omapusb(otg->usb_phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->set_vbus(phy->comparator, enabled); +} + +static int omap_usb_start_srp(struct usb_otg *otg) +{ + struct omap_usb *phy = phy_to_omapusb(otg->usb_phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->start_srp(phy->comparator); +} + +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + otg->host = host; + if (!host) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + otg->gadget = gadget; + if (!gadget) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_power_off(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + + omap_control_phy_power(phy->control_dev, 0); + + return 0; +} + +static int omap_usb_power_on(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + + omap_control_phy_power(phy->control_dev, 1); + + return 0; +} + +static int omap_usb_init(struct phy *x) +{ + struct omap_usb *phy = phy_get_drvdata(x); + u32 val; + + if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + /* + * + * Reduce the sensitivity of internal PHY by enabling the + * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This + * resolves issues with certain devices which can otherwise + * be prone to false disconnects. + * + */ + val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1); + val |= USB2PHY_DISCON_BYP_LATCH; + omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val); + } + + return 0; +} + +static struct phy_ops ops = { + .init = omap_usb_init, + .power_on = omap_usb_power_on, + .power_off = omap_usb_power_off, + .owner = THIS_MODULE, +}; + +static const struct usb_phy_data omap_usb2_data = { + .label = "omap_usb2", + .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, +}; + +static const struct usb_phy_data omap5_usb2_data = { + .label = "omap5_usb2", + .flags = 0, +}; + +static const struct usb_phy_data dra7x_usb2_data = { + .label = "dra7x_usb2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, +}; + +static const struct usb_phy_data am437x_usb2_data = { + .label = "am437x_usb2", + .flags = 0, +}; + +static const struct of_device_id omap_usb2_id_table[] = { + { + .compatible = "ti,omap-usb2", + .data = &omap_usb2_data, + }, + { + .compatible = "ti,omap5-usb2", + .data = &omap5_usb2_data, + }, + { + .compatible = "ti,dra7x-usb2", + .data = &dra7x_usb2_data, + }, + { + .compatible = "ti,am437x-usb2", + .data = &am437x_usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); + +static int omap_usb2_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct phy *generic_phy; + struct resource *res; + struct phy_provider *phy_provider; + struct usb_otg *otg; + struct device_node *node = pdev->dev.of_node; + struct device_node *control_node; + struct platform_device *control_pdev; + const struct of_device_id *of_id; + struct usb_phy_data *phy_data; + + of_id = of_match_device(omap_usb2_id_table, &pdev->dev); + + if (!of_id) + return -EINVAL; + + phy_data = (struct usb_phy_data *)of_id->data; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = phy_data->label; + phy->phy.otg = otg; + phy->phy.type = USB_PHY_TYPE_USB2; + + if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->phy_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(phy->phy_base)) + return PTR_ERR(phy->phy_base); + phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; + } + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, "Failed to get control device phandle\n"); + return -EINVAL; + } + + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + + phy->control_dev = &control_pdev->dev; + omap_control_phy_power(phy->control_dev, 0); + + otg->set_host = omap_usb_set_host; + otg->set_peripheral = omap_usb_set_peripheral; + if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS) + otg->set_vbus = omap_usb_set_vbus; + if (phy_data->flags & OMAP_USB2_HAS_START_SRP) + otg->start_srp = omap_usb_start_srp; + otg->usb_phy = &phy->phy; + + platform_set_drvdata(pdev, phy); + pm_runtime_enable(phy->dev); + + generic_phy = devm_phy_create(phy->dev, NULL, &ops); + if (IS_ERR(generic_phy)) { + pm_runtime_disable(phy->dev); + return PTR_ERR(generic_phy); + } + + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + pm_runtime_disable(phy->dev); + return PTR_ERR(phy_provider); + } + + phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); + if (IS_ERR(phy->wkupclk)) { + dev_warn(&pdev->dev, "unable to get wkupclk, trying old name\n"); + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + pm_runtime_disable(phy->dev); + return PTR_ERR(phy->wkupclk); + } else { + dev_warn(&pdev->dev, + "found usb_phy_cm_clk32k, please fix DTS\n"); + } + } + clk_prepare(phy->wkupclk); + + phy->optclk = devm_clk_get(phy->dev, "refclk"); + if (IS_ERR(phy->optclk)) { + dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n"); + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) { + dev_dbg(&pdev->dev, + "unable to get usb_otg_ss_refclk960m\n"); + } else { + dev_warn(&pdev->dev, + "found usb_otg_ss_refclk960m, please fix DTS\n"); + } + } + + if (!IS_ERR(phy->optclk)) + clk_prepare(phy->optclk); + + usb_add_phy_dev(&phy->phy); + + return 0; +} + +static int omap_usb2_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_unprepare(phy->optclk); + usb_remove_phy(&phy->phy); + pm_runtime_disable(phy->dev); + + return 0; +} + +#ifdef CONFIG_PM + +static int omap_usb2_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb2_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + int ret; + + ret = clk_enable(phy->wkupclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err0; + } + + if (!IS_ERR(phy->optclk)) { + ret = clk_enable(phy->optclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + } + + return 0; + +err1: + clk_disable(phy->wkupclk); + +err0: + return ret; +} + +static const struct dev_pm_ops omap_usb2_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb2_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +static struct platform_driver omap_usb2_driver = { + .probe = omap_usb2_probe, + .remove = omap_usb2_remove, + .driver = { + .name = "omap-usb2", + .pm = DEV_PM_OPS, + .of_match_table = omap_usb2_id_table, + }, +}; + +module_platform_driver(omap_usb2_driver); + +MODULE_ALIAS("platform:omap_usb2"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB2 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/phy-qcom-apq8064-sata.c new file mode 100644 index 000000000..4b243f7a1 --- /dev/null +++ b/drivers/phy/phy-qcom-apq8064-sata.c @@ -0,0 +1,287 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* PHY registers */ +#define UNIPHY_PLL_REFCLK_CFG 0x000 +#define UNIPHY_PLL_PWRGEN_CFG 0x014 +#define UNIPHY_PLL_GLB_CFG 0x020 +#define UNIPHY_PLL_SDM_CFG0 0x038 +#define UNIPHY_PLL_SDM_CFG1 0x03C +#define UNIPHY_PLL_SDM_CFG2 0x040 +#define UNIPHY_PLL_SDM_CFG3 0x044 +#define UNIPHY_PLL_SDM_CFG4 0x048 +#define UNIPHY_PLL_SSC_CFG0 0x04C +#define UNIPHY_PLL_SSC_CFG1 0x050 +#define UNIPHY_PLL_SSC_CFG2 0x054 +#define UNIPHY_PLL_SSC_CFG3 0x058 +#define UNIPHY_PLL_LKDET_CFG0 0x05C +#define UNIPHY_PLL_LKDET_CFG1 0x060 +#define UNIPHY_PLL_LKDET_CFG2 0x064 +#define UNIPHY_PLL_CAL_CFG0 0x06C +#define UNIPHY_PLL_CAL_CFG8 0x08C +#define UNIPHY_PLL_CAL_CFG9 0x090 +#define UNIPHY_PLL_CAL_CFG10 0x094 +#define UNIPHY_PLL_CAL_CFG11 0x098 +#define UNIPHY_PLL_STATUS 0x0C0 + +#define SATA_PHY_SER_CTRL 0x100 +#define SATA_PHY_TX_DRIV_CTRL0 0x104 +#define SATA_PHY_TX_DRIV_CTRL1 0x108 +#define SATA_PHY_TX_IMCAL0 0x11C +#define SATA_PHY_TX_IMCAL2 0x124 +#define SATA_PHY_RX_IMCAL0 0x128 +#define SATA_PHY_EQUAL 0x13C +#define SATA_PHY_OOB_TERM 0x144 +#define SATA_PHY_CDR_CTRL0 0x148 +#define SATA_PHY_CDR_CTRL1 0x14C +#define SATA_PHY_CDR_CTRL2 0x150 +#define SATA_PHY_CDR_CTRL3 0x154 +#define SATA_PHY_PI_CTRL0 0x168 +#define SATA_PHY_POW_DWN_CTRL0 0x180 +#define SATA_PHY_POW_DWN_CTRL1 0x184 +#define SATA_PHY_TX_DATA_CTRL 0x188 +#define SATA_PHY_ALIGNP 0x1A4 +#define SATA_PHY_TX_IMCAL_STAT 0x1E4 +#define SATA_PHY_RX_IMCAL_STAT 0x1E8 + +#define UNIPHY_PLL_LOCK BIT(0) +#define SATA_PHY_TX_CAL BIT(0) +#define SATA_PHY_RX_CAL BIT(0) + +/* default timeout set to 1 sec */ +#define TIMEOUT_MS 10000 +#define DELAY_INTERVAL_US 100 + +struct qcom_apq8064_sata_phy { + void __iomem *mmio; + struct clk *cfg_clk; + struct device *dev; +}; + +/* Helper function to do poll and timeout */ +static int read_poll_timeout(void __iomem *addr, u32 mask) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); + + do { + if (readl_relaxed(addr) & mask) + return 0; + + usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); + } while (!time_after(jiffies, timeout)); + + return (readl_relaxed(addr) & mask) ? 0 : -ETIMEDOUT; +} + +static int qcom_apq8064_sata_phy_init(struct phy *generic_phy) +{ + struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy); + void __iomem *base = phy->mmio; + int ret = 0; + + /* SATA phy initialization */ + writel_relaxed(0x01, base + SATA_PHY_SER_CTRL); + writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0); + /* Make sure the power down happens before power up */ + mb(); + usleep_range(10, 60); + + writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0); + writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1); + writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0); + writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0); + writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2); + + /* Write UNIPHYPLL registers to configure PLL */ + writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG); + writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG); + + writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0); + writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8); + writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9); + writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10); + writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11); + + writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0); + writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1); + writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2); + writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3); + writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4); + + writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0); + writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1); + writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2); + writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3); + + writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0); + writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1); + + writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG); + /* make sure global config LDO power down happens before power up */ + mb(); + + writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG); + writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2); + + /* PLL Lock wait */ + ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK); + if (ret) { + dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n"); + return ret; + } + + /* TX Calibration */ + ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL); + if (ret) { + dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n"); + return ret; + } + + /* RX Calibration */ + ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL); + if (ret) { + dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n"); + return ret; + } + + /* SATA phy calibrated succesfully, power up to functional mode */ + writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1); + writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0); + writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0); + + writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1); + writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0); + writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1); + writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2); + writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0); + writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3); + writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0); + + writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL); + writel_relaxed(0x43, base + SATA_PHY_ALIGNP); + writel_relaxed(0x04, base + SATA_PHY_OOB_TERM); + + writel_relaxed(0x01, base + SATA_PHY_EQUAL); + writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0); + writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1); + + return 0; +} + +static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy) +{ + struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy); + void __iomem *base = phy->mmio; + + /* Power down PHY */ + writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0); + writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1); + + /* Power down PLL block */ + writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG); + + return 0; +} + +static struct phy_ops qcom_apq8064_sata_phy_ops = { + .init = qcom_apq8064_sata_phy_init, + .exit = qcom_apq8064_sata_phy_exit, + .owner = THIS_MODULE, +}; + +static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev) +{ + struct qcom_apq8064_sata_phy *phy; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->mmio)) + return PTR_ERR(phy->mmio); + + generic_phy = devm_phy_create(dev, NULL, &qcom_apq8064_sata_phy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "%s: failed to create phy\n", __func__); + return PTR_ERR(generic_phy); + } + + phy->dev = dev; + phy_set_drvdata(generic_phy, phy); + platform_set_drvdata(pdev, phy); + + phy->cfg_clk = devm_clk_get(dev, "cfg"); + if (IS_ERR(phy->cfg_clk)) { + dev_err(dev, "Failed to get sata cfg clock\n"); + return PTR_ERR(phy->cfg_clk); + } + + ret = clk_prepare_enable(phy->cfg_clk); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + clk_disable_unprepare(phy->cfg_clk); + dev_err(dev, "%s: failed to register phy\n", __func__); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev) +{ + struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev); + + clk_disable_unprepare(phy->cfg_clk); + + return 0; +} + +static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = { + { .compatible = "qcom,apq8064-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match); + +static struct platform_driver qcom_apq8064_sata_phy_driver = { + .probe = qcom_apq8064_sata_phy_probe, + .remove = qcom_apq8064_sata_phy_remove, + .driver = { + .name = "qcom-apq8064-sata-phy", + .of_match_table = qcom_apq8064_sata_phy_of_match, + } +}; +module_platform_driver(qcom_apq8064_sata_phy_driver); + +MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c new file mode 100644 index 000000000..6f2fe2627 --- /dev/null +++ b/drivers/phy/phy-qcom-ipq806x-sata.c @@ -0,0 +1,209 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct qcom_ipq806x_sata_phy { + void __iomem *mmio; + struct clk *cfg_clk; + struct device *dev; +}; + +#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) + +#define SATA_PHY_P0_PARAM0 0x200 +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0) +#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0) + +#define SATA_PHY_P0_PARAM1 0x204 +#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0) +#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0) + +#define SATA_PHY_P0_PARAM2 0x208 +#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18) +#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18) + +#define SATA_PHY_P0_PARAM3 0x20C +#define SATA_PHY_SSC_EN 0x8 +#define SATA_PHY_P0_PARAM4 0x210 +#define SATA_PHY_REF_SSP_EN 0x2 +#define SATA_PHY_RESET 0x1 + +static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy) +{ + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); + u32 reg; + + /* Setting SSC_EN to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3); + reg = reg | SATA_PHY_SSC_EN; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) & + ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK | + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK | + SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK); + reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) & + ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK); + reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) | + SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1); + + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) & + ~SATA_PHY_P0_PARAM2_RX_EQ_MASK; + reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3); + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2); + + /* Setting PHY_RESET to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + /* Setting REF_SSP_EN to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + /* make sure all changes complete before we let the PHY out of reset */ + mb(); + + /* sleep for max. 50us more to combine processor wakeups */ + usleep_range(20, 20 + 50); + + /* Clearing PHY_RESET to 0 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg & ~SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + return 0; +} + +static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy) +{ + struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); + u32 reg; + + /* Setting PHY_RESET to 1 */ + reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); + reg = reg | SATA_PHY_RESET; + writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); + + return 0; +} + +static struct phy_ops qcom_ipq806x_sata_phy_ops = { + .init = qcom_ipq806x_sata_phy_init, + .exit = qcom_ipq806x_sata_phy_exit, + .owner = THIS_MODULE, +}; + +static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev) +{ + struct qcom_ipq806x_sata_phy *phy; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->mmio)) + return PTR_ERR(phy->mmio); + + generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "%s: failed to create phy\n", __func__); + return PTR_ERR(generic_phy); + } + + phy->dev = dev; + phy_set_drvdata(generic_phy, phy); + platform_set_drvdata(pdev, phy); + + phy->cfg_clk = devm_clk_get(dev, "cfg"); + if (IS_ERR(phy->cfg_clk)) { + dev_err(dev, "Failed to get sata cfg clock\n"); + return PTR_ERR(phy->cfg_clk); + } + + ret = clk_prepare_enable(phy->cfg_clk); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + clk_disable_unprepare(phy->cfg_clk); + dev_err(dev, "%s: failed to register phy\n", __func__); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev) +{ + struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev); + + clk_disable_unprepare(phy->cfg_clk); + + return 0; +} + +static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = { + { .compatible = "qcom,ipq806x-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match); + +static struct platform_driver qcom_ipq806x_sata_phy_driver = { + .probe = qcom_ipq806x_sata_phy_probe, + .remove = qcom_ipq806x_sata_phy_remove, + .driver = { + .name = "qcom-ipq806x-sata-phy", + .of_match_table = qcom_ipq806x_sata_phy_of_match, + } +}; +module_platform_driver(qcom_ipq806x_sata_phy_driver); + +MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h new file mode 100644 index 000000000..591a39175 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-i.h @@ -0,0 +1,159 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_I_H_ +#define UFS_QCOM_PHY_I_H_ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \ +({ \ + ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ + might_sleep_if(timeout_us); \ + for (;;) { \ + (val) = readl(addr); \ + if (cond) \ + break; \ + if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ + (val) = readl(addr); \ + break; \ + } \ + if (sleep_us) \ + usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \ + { \ + .reg_offset = reg, \ + .cfg_value = val, \ + } + +#define UFS_QCOM_PHY_NAME_LEN 30 + +enum { + MASK_SERDES_START = 0x1, + MASK_PCS_READY = 0x1, +}; + +enum { + OFFSET_SERDES_START = 0x0, +}; + +struct ufs_qcom_phy_stored_attributes { + u32 att; + u32 value; +}; + + +struct ufs_qcom_phy_calibration { + u32 reg_offset; + u32 cfg_value; +}; + +struct ufs_qcom_phy_vreg { + const char *name; + struct regulator *reg; + int max_uA; + int min_uV; + int max_uV; + bool enabled; + bool is_always_on; +}; + +struct ufs_qcom_phy { + struct list_head list; + struct device *dev; + void __iomem *mmio; + void __iomem *dev_ref_clk_ctrl_mmio; + struct clk *tx_iface_clk; + struct clk *rx_iface_clk; + bool is_iface_clk_enabled; + struct clk *ref_clk_src; + struct clk *ref_clk_parent; + struct clk *ref_clk; + bool is_ref_clk_enabled; + bool is_dev_ref_clk_enabled; + struct ufs_qcom_phy_vreg vdda_pll; + struct ufs_qcom_phy_vreg vdda_phy; + struct ufs_qcom_phy_vreg vddp_ref_clk; + unsigned int quirks; + + /* + * If UFS link is put into Hibern8 and if UFS PHY analog hardware is + * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8 + * exit might fail even after powering on UFS PHY analog hardware. + * Enabling this quirk will help to solve above issue by doing + * custom PHY settings just before PHY analog power collapse. + */ + #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0) + + u8 host_ctrl_rev_major; + u16 host_ctrl_rev_minor; + u16 host_ctrl_rev_step; + + char name[UFS_QCOM_PHY_NAME_LEN]; + struct ufs_qcom_phy_calibration *cached_regs; + int cached_regs_table_size; + bool is_powered_on; + struct ufs_qcom_phy_specific_ops *phy_spec_ops; +}; + +/** + * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a + * specific implementation per phy. Each UFS phy, should implement + * those functions according to its spec and requirements + * @calibrate_phy: pointer to a function that calibrate the phy + * @start_serdes: pointer to a function that starts the serdes + * @is_physical_coding_sublayer_ready: pointer to a function that + * checks pcs readiness. returns 0 for success and non-zero for error. + * @set_tx_lane_enable: pointer to a function that enable tx lanes + * @power_control: pointer to a function that controls analog rail of phy + * and writes to QSERDES_RX_SIGDET_CNTRL attribute + */ +struct ufs_qcom_phy_specific_ops { + int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B); + void (*start_serdes)(struct ufs_qcom_phy *phy); + int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy); + void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val); + void (*power_control)(struct ufs_qcom_phy *phy, bool val); +}; + +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); +int ufs_qcom_phy_power_on(struct phy *generic_phy); +int ufs_qcom_phy_power_off(struct phy *generic_phy); +int ufs_qcom_phy_exit(struct phy *generic_phy); +int ufs_qcom_phy_init_clks(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_init_vregulators(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common); +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy); +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops); +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B, + bool is_rate_B); +#endif diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c new file mode 100644 index 000000000..f5fc50a9f --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c @@ -0,0 +1,201 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-qmp-14nm.h" + +#define UFS_PHY_NAME "ufs_phy_qmp_14nm" +#define UFS_PHY_VDDA_PHY_UV (925000) + +static +int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + bool is_rate_B) +{ + int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A); + int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); + int err; + + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A, + tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B); + + if (err) + dev_err(ufs_qcom_phy->dev, + "%s: ufs_qcom_phy_calibrate() failed %d\n", + __func__, err); + return err; +} + +static +void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common) +{ + phy_common->quirks = + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; +} + +static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy) +{ + struct ufs_qcom_phy_qmp_14nm *phy = phy_get_drvdata(generic_phy); + struct ufs_qcom_phy *phy_common = &phy->common_cfg; + int err; + + err = ufs_qcom_phy_init_clks(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", + __func__, err); + goto out; + } + + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", + __func__, err); + goto out; + } + phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV; + phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV; + + ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val) +{ + writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * Before any transactions involving PHY, ensure PHY knows + * that it's analog rail is powered ON (or OFF). + */ + mb(); +} + +static inline +void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) +{ + /* + * 14nm PHY does not have TX_LANE_ENABLE register. + * Implement this function so as not to propagate error to caller. + */ +} + +static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy) +{ + u32 tmp; + + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); + tmp &= ~MASK_SERDES_START; + tmp |= (1 << OFFSET_SERDES_START); + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); + /* Ensure register value is committed */ + mb(); +} + +static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) +{ + int err = 0; + u32 val; + + err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, + val, (val & MASK_PCS_READY), 10, 1000000); + if (err) + dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", + __func__, err); + return err; +} + +static struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { + .init = ufs_qcom_phy_qmp_14nm_init, + .exit = ufs_qcom_phy_exit, + .power_on = ufs_qcom_phy_power_on, + .power_off = ufs_qcom_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct ufs_qcom_phy_specific_ops phy_14nm_ops = { + .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate, + .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes, + .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready, + .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable, + .power_control = ufs_qcom_phy_qmp_14nm_power_control, +}; + +static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct ufs_qcom_phy_qmp_14nm *phy; + int err = 0; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + err = -ENOMEM; + goto out; + } + + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, + &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops); + + if (!generic_phy) { + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", + __func__); + err = -EIO; + goto out; + } + + phy_set_drvdata(generic_phy, phy); + + strlcpy(phy->common_cfg.name, UFS_PHY_NAME, + sizeof(phy->common_cfg.name)); + +out: + return err; +} + +static int ufs_qcom_phy_qmp_14nm_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy = to_phy(dev); + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int err = 0; + + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); + if (err) + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", + __func__, err); + + return err; +} + +static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = { + {.compatible = "qcom,ufs-phy-qmp-14nm"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match); + +static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = { + .probe = ufs_qcom_phy_qmp_14nm_probe, + .remove = ufs_qcom_phy_qmp_14nm_remove, + .driver = { + .of_match_table = ufs_qcom_phy_qmp_14nm_of_match, + .name = "ufs_qcom_phy_qmp_14nm", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ufs_qcom_phy_qmp_14nm_driver); + +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/phy-qcom-ufs-qmp-14nm.h new file mode 100644 index 000000000..3aefdbacb --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.h @@ -0,0 +1,177 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_QMP_14NM_H_ +#define UFS_QCOM_PHY_QMP_14NM_H_ + +#include "phy-qcom-ufs-i.h" + +/* QCOM UFS PHY control registers */ +#define COM_OFF(x) (0x000 + x) +#define PHY_OFF(x) (0xC00 + x) +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) + +/* UFS PHY QSERDES COM registers */ +#define QSERDES_COM_BG_TIMER COM_OFF(0x0C) +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) +#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C) +#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50) +#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54) +#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58) +#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C) +#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60) +#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78) +#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C) +#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84) +#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88) +#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90) +#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94) +#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC) +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4) +#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8) +#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC) +#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0) +#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4) +#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC) +#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0) +#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4) +#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8) +#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC) +#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0) +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108) +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C) +#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110) +#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114) +#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124) +#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128) +#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C) +#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130) +#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134) +#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138) +#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144) +#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148) +#define QSERDES_COM_CLK_SELECT COM_OFF(0x174) +#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178) +#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184) +#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C) +#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194) +#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C) +#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC) + +/* UFS PHY registers */ +#define UFS_PHY_PHY_START PHY_OFF(0x00) +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168) + +/* UFS PHY TX registers */ +#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68) +#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94) + +/* UFS PHY RX registers */ +#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40) +#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90) +#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4) +#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8) +#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC) +#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0) +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8) +#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114) +#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118) +#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C) +#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C) + +/* + * This structure represents the 14nm specific phy. + * common_cfg MUST remain the first field in this structure + * in case extra fields are added. This way, when calling + * get_ufs_qcom_phy() of generic phy, we can extract the + * common phy structure (struct ufs_qcom_phy) out of it + * regardless of the relevant specific phy. + */ +struct ufs_qcom_phy_qmp_14nm { + struct ufs_qcom_phy common_cfg; +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), + + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02), + + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54), +}; + +#endif diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c new file mode 100644 index 000000000..8332f96b2 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c @@ -0,0 +1,257 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-qmp-20nm.h" + +#define UFS_PHY_NAME "ufs_phy_qmp_20nm" + +static +int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + bool is_rate_B) +{ + struct ufs_qcom_phy_calibration *tbl_A, *tbl_B; + int tbl_size_A, tbl_size_B; + u8 major = ufs_qcom_phy->host_ctrl_rev_major; + u16 minor = ufs_qcom_phy->host_ctrl_rev_minor; + u16 step = ufs_qcom_phy->host_ctrl_rev_step; + int err; + + if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) { + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0); + tbl_A = phy_cal_table_rate_A_1_2_0; + } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) { + tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0); + tbl_A = phy_cal_table_rate_A_1_3_0; + } else { + dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n", + __func__); + err = -ENODEV; + goto out; + } + + tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); + tbl_B = phy_cal_table_rate_B; + + err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A, + tbl_B, tbl_size_B, is_rate_B); + + if (err) + dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n", + __func__, err); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) +{ + phy_common->quirks = + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; +} + +static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy) +{ + struct ufs_qcom_phy_qmp_20nm *phy = phy_get_drvdata(generic_phy); + struct ufs_qcom_phy *phy_common = &phy->common_cfg; + int err = 0; + + err = ufs_qcom_phy_init_clks(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n", + __func__, err); + goto out; + } + + err = ufs_qcom_phy_init_vregulators(generic_phy, phy_common); + if (err) { + dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n", + __func__, err); + goto out; + } + + ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common); + +out: + return err; +} + +static +void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) +{ + bool hibern8_exit_after_pwr_collapse = phy->quirks & + UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; + + if (val) { + writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * Before any transactions involving PHY, ensure PHY knows + * that it's analog rail is powered ON. + */ + mb(); + + if (hibern8_exit_after_pwr_collapse) { + /* + * Give atleast 1us delay after restoring PHY analog + * power. + */ + usleep_range(1, 2); + writel_relaxed(0x0A, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + writel_relaxed(0x08, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + /* + * Make sure workaround is deactivated before proceeding + * with normal PHY operations. + */ + mb(); + } + } else { + if (hibern8_exit_after_pwr_collapse) { + writel_relaxed(0x0A, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + writel_relaxed(0x02, phy->mmio + + QSERDES_COM_SYSCLK_EN_SEL_TXBAND); + /* + * Make sure that above workaround is activated before + * PHY analog power collapse. + */ + mb(); + } + + writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); + /* + * ensure that PHY knows its PHY analog rail is going + * to be powered down + */ + mb(); + } +} + +static +void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) +{ + writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK, + phy->mmio + UFS_PHY_TX_LANE_ENABLE); + mb(); +} + +static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy) +{ + u32 tmp; + + tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); + tmp &= ~MASK_SERDES_START; + tmp |= (1 << OFFSET_SERDES_START); + writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); + mb(); +} + +static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) +{ + int err = 0; + u32 val; + + err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, + val, (val & MASK_PCS_READY), 10, 1000000); + if (err) + dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", + __func__, err); + return err; +} + +static struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { + .init = ufs_qcom_phy_qmp_20nm_init, + .exit = ufs_qcom_phy_exit, + .power_on = ufs_qcom_phy_power_on, + .power_off = ufs_qcom_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { + .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate, + .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes, + .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, + .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, + .power_control = ufs_qcom_phy_qmp_20nm_power_control, +}; + +static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct ufs_qcom_phy_qmp_20nm *phy; + int err = 0; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(dev, "%s: failed to allocate phy\n", __func__); + err = -ENOMEM; + goto out; + } + + generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg, + &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops); + + if (!generic_phy) { + dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n", + __func__); + err = -EIO; + goto out; + } + + phy_set_drvdata(generic_phy, phy); + + strlcpy(phy->common_cfg.name, UFS_PHY_NAME, + sizeof(phy->common_cfg.name)); + +out: + return err; +} + +static int ufs_qcom_phy_qmp_20nm_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy = to_phy(dev); + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int err = 0; + + err = ufs_qcom_phy_remove(generic_phy, ufs_qcom_phy); + if (err) + dev_err(dev, "%s: ufs_qcom_phy_remove failed = %d\n", + __func__, err); + + return err; +} + +static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = { + {.compatible = "qcom,ufs-phy-qmp-20nm"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match); + +static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = { + .probe = ufs_qcom_phy_qmp_20nm_probe, + .remove = ufs_qcom_phy_qmp_20nm_remove, + .driver = { + .of_match_table = ufs_qcom_phy_qmp_20nm_of_match, + .name = "ufs_qcom_phy_qmp_20nm", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(ufs_qcom_phy_qmp_20nm_driver); + +MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/phy-qcom-ufs-qmp-20nm.h new file mode 100644 index 000000000..4f3076bb3 --- /dev/null +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.h @@ -0,0 +1,235 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef UFS_QCOM_PHY_QMP_20NM_H_ +#define UFS_QCOM_PHY_QMP_20NM_H_ + +#include "phy-qcom-ufs-i.h" + +/* QCOM UFS PHY control registers */ + +#define COM_OFF(x) (0x000 + x) +#define PHY_OFF(x) (0xC00 + x) +#define TX_OFF(n, x) (0x400 + (0x400 * n) + x) +#define RX_OFF(n, x) (0x600 + (0x400 * n) + x) + +/* UFS PHY PLL block registers */ +#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0) +#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04) +#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14) +#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24) +#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28) +#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30) +#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34) +#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38) +#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C) +#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48) +#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C) +#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50) +#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90) +#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94) +#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98) +#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C) +#define QSERDES_COM_BGTC COM_OFF(0xA0) +#define QSERDES_COM_DEC_START1 COM_OFF(0xAC) +#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0) +#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8) +#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC) +#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100) +#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104) +#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108) +#define QSERDES_COM_DEC_START2 COM_OFF(0x10C) +#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110) +#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114) +#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118) + +/* TX LANE n (0, 1) registers */ +#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08) +#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C) +#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54) + +/* RX LANE n (0, 1) registers */ +#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0) +#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8) +#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8) +#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC) +#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0) +#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4) +#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC) +#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC) +#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100) + +/* UFS PHY registers */ +#define UFS_PHY_PHY_START PHY_OFF(0x00) +#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4) +#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44) +#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08) +#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C) +#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10) +#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14) +#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34) +#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38) +#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C) +#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40) +#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68) +#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28) +#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C) +#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48) +#define UFS_PHY_PLL_CNTL PHY_OFF(0x50) +#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54) +#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C) +#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58) +#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60) +#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64) +#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C) +#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4) +#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0) +#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8) +#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4) +#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC) +#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8) +#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC) +#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100) +#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c) +#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160) +#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7) +#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6) +#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5) +#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4) +#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3) +#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2) +#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1) +#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0) +#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164) +#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168) +#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C) +#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170) +#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174) + +#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3 + +/* + * This structure represents the 20nm specific phy. + * common_cfg MUST remain the first field in this structure + * in case extra fields are added. This way, when calling + * get_ufs_qcom_phy() of generic phy, we can extract the + * common phy structure (struct ufs_qcom_phy) out of it + * regardless of the relevant specific phy. + */ +struct ufs_qcom_phy_qmp_20nm { + struct ufs_qcom_phy common_cfg; +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = { + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3), +}; + +static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65), + UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e), +}; + +#endif diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c new file mode 100644 index 000000000..f9c618f0a --- /dev/null +++ b/drivers/phy/phy-qcom-ufs.c @@ -0,0 +1,738 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include "phy-qcom-ufs-i.h" + +#define MAX_PROP_NAME 32 +#define VDDA_PHY_MIN_UV 1000000 +#define VDDA_PHY_MAX_UV 1000000 +#define VDDA_PLL_MIN_UV 1800000 +#define VDDA_PLL_MAX_UV 1800000 +#define VDDP_REF_CLK_MIN_UV 1200000 +#define VDDP_REF_CLK_MAX_UV 1200000 + +static int __ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, + const char *, bool); +static int ufs_qcom_phy_init_vreg(struct phy *, struct ufs_qcom_phy_vreg *, + const char *); +static int ufs_qcom_phy_base_init(struct platform_device *pdev, + struct ufs_qcom_phy *phy_common); + +int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, + struct ufs_qcom_phy_calibration *tbl_A, + int tbl_size_A, + struct ufs_qcom_phy_calibration *tbl_B, + int tbl_size_B, bool is_rate_B) +{ + int i; + int ret = 0; + + if (!tbl_A) { + dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__); + ret = EINVAL; + goto out; + } + + for (i = 0; i < tbl_size_A; i++) + writel_relaxed(tbl_A[i].cfg_value, + ufs_qcom_phy->mmio + tbl_A[i].reg_offset); + + /* + * In case we would like to work in rate B, we need + * to override a registers that were configured in rate A table + * with registers of rate B table. + * table. + */ + if (is_rate_B) { + if (!tbl_B) { + dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL", + __func__); + ret = EINVAL; + goto out; + } + + for (i = 0; i < tbl_size_B; i++) + writel_relaxed(tbl_B[i].cfg_value, + ufs_qcom_phy->mmio + tbl_B[i].reg_offset); + } + + /* flush buffered writes */ + mb(); + +out: + return ret; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate); + +struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev, + struct ufs_qcom_phy *common_cfg, + struct phy_ops *ufs_qcom_phy_gen_ops, + struct ufs_qcom_phy_specific_ops *phy_spec_ops) +{ + int err; + struct device *dev = &pdev->dev; + struct phy *generic_phy = NULL; + struct phy_provider *phy_provider; + + err = ufs_qcom_phy_base_init(pdev, common_cfg); + if (err) { + dev_err(dev, "%s: phy base init failed %d\n", __func__, err); + goto out; + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + err = PTR_ERR(phy_provider); + dev_err(dev, "%s: failed to register phy %d\n", __func__, err); + goto out; + } + + generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops); + if (IS_ERR(generic_phy)) { + err = PTR_ERR(generic_phy); + dev_err(dev, "%s: failed to create phy %d\n", __func__, err); + generic_phy = NULL; + goto out; + } + + common_cfg->phy_spec_ops = phy_spec_ops; + common_cfg->dev = dev; + +out: + return generic_phy; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); + +/* + * This assumes the embedded phy structure inside generic_phy is of type + * struct ufs_qcom_phy. In order to function properly it's crucial + * to keep the embedded struct "struct ufs_qcom_phy common_cfg" + * as the first inside generic_phy. + */ +struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy) +{ + return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy); +} +EXPORT_SYMBOL_GPL(get_ufs_qcom_phy); + +static +int ufs_qcom_phy_base_init(struct platform_device *pdev, + struct ufs_qcom_phy *phy_common) +{ + struct device *dev = &pdev->dev; + struct resource *res; + int err = 0; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem"); + phy_common->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR((void const *)phy_common->mmio)) { + err = PTR_ERR((void const *)phy_common->mmio); + phy_common->mmio = NULL; + dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n", + __func__, err); + return err; + } + + /* "dev_ref_clk_ctrl_mem" is optional resource */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dev_ref_clk_ctrl_mem"); + phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res); + if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) + phy_common->dev_ref_clk_ctrl_mmio = NULL; + + return 0; +} + +static int __ufs_qcom_phy_clk_get(struct phy *phy, + const char *name, struct clk **clk_out, bool err_print) +{ + struct clk *clk; + int err = 0; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + if (err_print) + dev_err(dev, "failed to get %s err %d", name, err); + } else { + *clk_out = clk; + } + + return err; +} + +static +int ufs_qcom_phy_clk_get(struct phy *phy, + const char *name, struct clk **clk_out) +{ + return __ufs_qcom_phy_clk_get(phy, name, clk_out, true); +} + +int +ufs_qcom_phy_init_clks(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common) +{ + int err; + + err = ufs_qcom_phy_clk_get(generic_phy, "tx_iface_clk", + &phy_common->tx_iface_clk); + if (err) + goto out; + + err = ufs_qcom_phy_clk_get(generic_phy, "rx_iface_clk", + &phy_common->rx_iface_clk); + if (err) + goto out; + + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk_src", + &phy_common->ref_clk_src); + if (err) + goto out; + + /* + * "ref_clk_parent" is optional hence don't abort init if it's not + * found. + */ + __ufs_qcom_phy_clk_get(generic_phy, "ref_clk_parent", + &phy_common->ref_clk_parent, false); + + err = ufs_qcom_phy_clk_get(generic_phy, "ref_clk", + &phy_common->ref_clk); + +out: + return err; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks); + +int +ufs_qcom_phy_init_vregulators(struct phy *generic_phy, + struct ufs_qcom_phy *phy_common) +{ + int err; + + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_pll, + "vdda-pll"); + if (err) + goto out; + + err = ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vdda_phy, + "vdda-phy"); + + if (err) + goto out; + + /* vddp-ref-clk-* properties are optional */ + __ufs_qcom_phy_init_vreg(generic_phy, &phy_common->vddp_ref_clk, + "vddp-ref-clk", true); +out: + return err; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators); + +static int __ufs_qcom_phy_init_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional) +{ + int err = 0; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + char prop_name[MAX_PROP_NAME]; + + vreg->name = kstrdup(name, GFP_KERNEL); + if (!vreg->name) { + err = -ENOMEM; + goto out; + } + + vreg->reg = devm_regulator_get(dev, name); + if (IS_ERR(vreg->reg)) { + err = PTR_ERR(vreg->reg); + vreg->reg = NULL; + if (!optional) + dev_err(dev, "failed to get %s, %d\n", name, err); + goto out; + } + + if (dev->of_node) { + snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name); + err = of_property_read_u32(dev->of_node, + prop_name, &vreg->max_uA); + if (err && err != -EINVAL) { + dev_err(dev, "%s: failed to read %s\n", + __func__, prop_name); + goto out; + } else if (err == -EINVAL || !vreg->max_uA) { + if (regulator_count_voltages(vreg->reg) > 0) { + dev_err(dev, "%s: %s is mandatory\n", + __func__, prop_name); + goto out; + } + err = 0; + } + snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name); + if (of_get_property(dev->of_node, prop_name, NULL)) + vreg->is_always_on = true; + else + vreg->is_always_on = false; + } + + if (!strcmp(name, "vdda-pll")) { + vreg->max_uV = VDDA_PLL_MAX_UV; + vreg->min_uV = VDDA_PLL_MIN_UV; + } else if (!strcmp(name, "vdda-phy")) { + vreg->max_uV = VDDA_PHY_MAX_UV; + vreg->min_uV = VDDA_PHY_MIN_UV; + } else if (!strcmp(name, "vddp-ref-clk")) { + vreg->max_uV = VDDP_REF_CLK_MAX_UV; + vreg->min_uV = VDDP_REF_CLK_MIN_UV; + } + +out: + if (err) + kfree(vreg->name); + return err; +} + +static int ufs_qcom_phy_init_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, const char *name) +{ + return __ufs_qcom_phy_init_vreg(phy, vreg, name, false); +} + +static +int ufs_qcom_phy_cfg_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg, bool on) +{ + int ret = 0; + struct regulator *reg = vreg->reg; + const char *name = vreg->name; + int min_uV; + int uA_load; + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + + BUG_ON(!vreg); + + if (regulator_count_voltages(reg) > 0) { + min_uV = on ? vreg->min_uV : 0; + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); + if (ret) { + dev_err(dev, "%s: %s set voltage failed, err=%d\n", + __func__, name, ret); + goto out; + } + uA_load = on ? vreg->max_uA : 0; + ret = regulator_set_load(reg, uA_load); + if (ret >= 0) { + /* + * regulator_set_load() returns new regulator + * mode upon success. + */ + ret = 0; + } else { + dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", + __func__, name, uA_load, ret); + goto out; + } + } +out: + return ret; +} + +static +int ufs_qcom_phy_enable_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + int ret = 0; + + if (!vreg || vreg->enabled) + goto out; + + ret = ufs_qcom_phy_cfg_vreg(phy, vreg, true); + if (ret) { + dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n", + __func__, ret); + goto out; + } + + ret = regulator_enable(vreg->reg); + if (ret) { + dev_err(dev, "%s: enable failed, err=%d\n", + __func__, ret); + goto out; + } + + vreg->enabled = true; +out: + return ret; +} + +int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy) +{ + int ret = 0; + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_ref_clk_enabled) + goto out; + + /* + * reference clock is propagated in a daisy-chained manner from + * source to phy, so ungate them at each stage. + */ + ret = clk_prepare_enable(phy->ref_clk_src); + if (ret) { + dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n", + __func__, ret); + goto out; + } + + /* + * "ref_clk_parent" is optional clock hence make sure that clk reference + * is available before trying to enable the clock. + */ + if (phy->ref_clk_parent) { + ret = clk_prepare_enable(phy->ref_clk_parent); + if (ret) { + dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n", + __func__, ret); + goto out_disable_src; + } + } + + ret = clk_prepare_enable(phy->ref_clk); + if (ret) { + dev_err(phy->dev, "%s: ref_clk enable failed %d\n", + __func__, ret); + goto out_disable_parent; + } + + phy->is_ref_clk_enabled = true; + goto out; + +out_disable_parent: + if (phy->ref_clk_parent) + clk_disable_unprepare(phy->ref_clk_parent); +out_disable_src: + clk_disable_unprepare(phy->ref_clk_src); +out: + return ret; +} + +static +int ufs_qcom_phy_disable_vreg(struct phy *phy, + struct ufs_qcom_phy_vreg *vreg) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(phy); + struct device *dev = ufs_qcom_phy->dev; + int ret = 0; + + if (!vreg || !vreg->enabled || vreg->is_always_on) + goto out; + + ret = regulator_disable(vreg->reg); + + if (!ret) { + /* ignore errors on applying disable config */ + ufs_qcom_phy_cfg_vreg(phy, vreg, false); + vreg->enabled = false; + } else { + dev_err(dev, "%s: %s disable failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_ref_clk_enabled) { + clk_disable_unprepare(phy->ref_clk); + /* + * "ref_clk_parent" is optional clock hence make sure that clk + * reference is available before trying to disable the clock. + */ + if (phy->ref_clk_parent) + clk_disable_unprepare(phy->ref_clk_parent); + clk_disable_unprepare(phy->ref_clk_src); + phy->is_ref_clk_enabled = false; + } +} + +#define UFS_REF_CLK_EN (1 << 5) + +static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->dev_ref_clk_ctrl_mmio && + (enable ^ phy->is_dev_ref_clk_enabled)) { + u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); + + if (enable) + temp |= UFS_REF_CLK_EN; + else + temp &= ~UFS_REF_CLK_EN; + + /* + * If we are here to disable this clock immediately after + * entering into hibern8, we need to make sure that device + * ref_clk is active atleast 1us after the hibern8 enter. + */ + if (!enable) + udelay(1); + + writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); + /* ensure that ref_clk is enabled/disabled before we return */ + wmb(); + /* + * If we call hibern8 exit after this, we need to make sure that + * device ref_clk is stable for atleast 1us before the hibern8 + * exit command. + */ + if (enable) + udelay(1); + + phy->is_dev_ref_clk_enabled = enable; + } +} + +void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) +{ + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); +} + +void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) +{ + ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); +} + +/* Turn ON M-PHY RMMI interface clocks */ +int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (phy->is_iface_clk_enabled) + goto out; + + ret = clk_prepare_enable(phy->tx_iface_clk); + if (ret) { + dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n", + __func__, ret); + goto out; + } + ret = clk_prepare_enable(phy->rx_iface_clk); + if (ret) { + clk_disable_unprepare(phy->tx_iface_clk); + dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n", + __func__, ret); + goto out; + } + phy->is_iface_clk_enabled = true; + +out: + return ret; +} + +/* Turn OFF M-PHY RMMI interface clocks */ +void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); + + if (phy->is_iface_clk_enabled) { + clk_disable_unprepare(phy->tx_iface_clk); + clk_disable_unprepare(phy->rx_iface_clk); + phy->is_iface_clk_enabled = false; + } +} + +int ufs_qcom_phy_start_serdes(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->start_serdes) { + dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy); + } + + return ret; +} + +int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) { + dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy, + tx_lanes); + } + + return ret; +} + +void ufs_qcom_phy_save_controller_version(struct phy *generic_phy, + u8 major, u16 minor, u16 step) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + ufs_qcom_phy->host_ctrl_rev_major = major; + ufs_qcom_phy->host_ctrl_rev_minor = minor; + ufs_qcom_phy->host_ctrl_rev_step = step; +} + +int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + int ret = 0; + + if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) { + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not supported\n", + __func__); + ret = -ENOTSUPP; + } else { + ret = ufs_qcom_phy->phy_spec_ops-> + calibrate_phy(ufs_qcom_phy, is_rate_B); + if (ret) + dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n", + __func__, ret); + } + + return ret; +} + +int ufs_qcom_phy_remove(struct phy *generic_phy, + struct ufs_qcom_phy *ufs_qcom_phy) +{ + phy_power_off(generic_phy); + + kfree(ufs_qcom_phy->vdda_pll.name); + kfree(ufs_qcom_phy->vdda_phy.name); + + return 0; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_remove); + +int ufs_qcom_phy_exit(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + if (ufs_qcom_phy->is_powered_on) + phy_power_off(generic_phy); + + return 0; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit); + +int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) +{ + struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); + + if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) { + dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n", + __func__); + return -ENOTSUPP; + } + + return ufs_qcom_phy->phy_spec_ops-> + is_physical_coding_sublayer_ready(ufs_qcom_phy); +} + +int ufs_qcom_phy_power_on(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + struct device *dev = phy_common->dev; + int err; + + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_phy); + if (err) { + dev_err(dev, "%s enable vdda_phy failed, err=%d\n", + __func__, err); + goto out; + } + + phy_common->phy_spec_ops->power_control(phy_common, true); + + /* vdda_pll also enables ref clock LDOs so enable it first */ + err = ufs_qcom_phy_enable_vreg(generic_phy, &phy_common->vdda_pll); + if (err) { + dev_err(dev, "%s enable vdda_pll failed, err=%d\n", + __func__, err); + goto out_disable_phy; + } + + err = ufs_qcom_phy_enable_ref_clk(generic_phy); + if (err) { + dev_err(dev, "%s enable phy ref clock failed, err=%d\n", + __func__, err); + goto out_disable_pll; + } + + /* enable device PHY ref_clk pad rail */ + if (phy_common->vddp_ref_clk.reg) { + err = ufs_qcom_phy_enable_vreg(generic_phy, + &phy_common->vddp_ref_clk); + if (err) { + dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n", + __func__, err); + goto out_disable_ref_clk; + } + } + + phy_common->is_powered_on = true; + goto out; + +out_disable_ref_clk: + ufs_qcom_phy_disable_ref_clk(generic_phy); +out_disable_pll: + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); +out_disable_phy: + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); +out: + return err; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on); + +int ufs_qcom_phy_power_off(struct phy *generic_phy) +{ + struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + + phy_common->phy_spec_ops->power_control(phy_common, false); + + if (phy_common->vddp_ref_clk.reg) + ufs_qcom_phy_disable_vreg(generic_phy, + &phy_common->vddp_ref_clk); + ufs_qcom_phy_disable_ref_clk(generic_phy); + + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_pll); + ufs_qcom_phy_disable_vreg(generic_phy, &phy_common->vdda_phy); + phy_common->is_powered_on = false; + + return 0; +} +EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c new file mode 100644 index 000000000..97d45f47d --- /dev/null +++ b/drivers/phy/phy-rcar-gen2.c @@ -0,0 +1,341 @@ +/* + * Renesas R-Car Gen2 PHY driver + * + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define USBHS_LPSTS 0x02 +#define USBHS_UGCTRL 0x80 +#define USBHS_UGCTRL2 0x84 +#define USBHS_UGSTS 0x88 /* From technical update */ + +/* Low Power Status register (LPSTS) */ +#define USBHS_LPSTS_SUSPM 0x4000 + +/* USB General control register (UGCTRL) */ +#define USBHS_UGCTRL_CONNECT 0x00000004 +#define USBHS_UGCTRL_PLLRESET 0x00000001 + +/* USB General control register 2 (UGCTRL2) */ +#define USBHS_UGCTRL2_USB2SEL 0x80000000 +#define USBHS_UGCTRL2_USB2SEL_PCI 0x00000000 +#define USBHS_UGCTRL2_USB2SEL_USB30 0x80000000 +#define USBHS_UGCTRL2_USB0SEL 0x00000030 +#define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010 +#define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030 + +/* USB General status register (UGSTS) */ +#define USBHS_UGSTS_LOCK 0x00000100 /* From technical update */ + +#define PHYS_PER_CHANNEL 2 + +struct rcar_gen2_phy { + struct phy *phy; + struct rcar_gen2_channel *channel; + int number; + u32 select_value; +}; + +struct rcar_gen2_channel { + struct device_node *of_node; + struct rcar_gen2_phy_driver *drv; + struct rcar_gen2_phy phys[PHYS_PER_CHANNEL]; + int selected_phy; + u32 select_mask; +}; + +struct rcar_gen2_phy_driver { + void __iomem *base; + struct clk *clk; + spinlock_t lock; + int num_channels; + struct rcar_gen2_channel *channels; +}; + +static int rcar_gen2_phy_init(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_channel *channel = phy->channel; + struct rcar_gen2_phy_driver *drv = channel->drv; + unsigned long flags; + u32 ugctrl2; + + /* + * Try to acquire exclusive access to PHY. The first driver calling + * phy_init() on a given channel wins, and all attempts to use another + * PHY on this channel will fail until phy_exit() is called by the first + * driver. Achieving this with cmpxcgh() should be SMP-safe. + */ + if (cmpxchg(&channel->selected_phy, -1, phy->number) != -1) + return -EBUSY; + + clk_prepare_enable(drv->clk); + + spin_lock_irqsave(&drv->lock, flags); + ugctrl2 = readl(drv->base + USBHS_UGCTRL2); + ugctrl2 &= ~channel->select_mask; + ugctrl2 |= phy->select_value; + writel(ugctrl2, drv->base + USBHS_UGCTRL2); + spin_unlock_irqrestore(&drv->lock, flags); + return 0; +} + +static int rcar_gen2_phy_exit(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_channel *channel = phy->channel; + + clk_disable_unprepare(channel->drv->clk); + + channel->selected_phy = -1; + + return 0; +} + +static int rcar_gen2_phy_power_on(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_phy_driver *drv = phy->channel->drv; + void __iomem *base = drv->base; + unsigned long flags; + u32 value; + int err = 0, i; + + /* Skip if it's not USBHS */ + if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB) + return 0; + + spin_lock_irqsave(&drv->lock, flags); + + /* Power on USBHS PHY */ + value = readl(base + USBHS_UGCTRL); + value &= ~USBHS_UGCTRL_PLLRESET; + writel(value, base + USBHS_UGCTRL); + + value = readw(base + USBHS_LPSTS); + value |= USBHS_LPSTS_SUSPM; + writew(value, base + USBHS_LPSTS); + + for (i = 0; i < 20; i++) { + value = readl(base + USBHS_UGSTS); + if ((value & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { + value = readl(base + USBHS_UGCTRL); + value |= USBHS_UGCTRL_CONNECT; + writel(value, base + USBHS_UGCTRL); + goto out; + } + udelay(1); + } + + /* Timed out waiting for the PLL lock */ + err = -ETIMEDOUT; + +out: + spin_unlock_irqrestore(&drv->lock, flags); + + return err; +} + +static int rcar_gen2_phy_power_off(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_phy_driver *drv = phy->channel->drv; + void __iomem *base = drv->base; + unsigned long flags; + u32 value; + + /* Skip if it's not USBHS */ + if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB) + return 0; + + spin_lock_irqsave(&drv->lock, flags); + + /* Power off USBHS PHY */ + value = readl(base + USBHS_UGCTRL); + value &= ~USBHS_UGCTRL_CONNECT; + writel(value, base + USBHS_UGCTRL); + + value = readw(base + USBHS_LPSTS); + value &= ~USBHS_LPSTS_SUSPM; + writew(value, base + USBHS_LPSTS); + + value = readl(base + USBHS_UGCTRL); + value |= USBHS_UGCTRL_PLLRESET; + writel(value, base + USBHS_UGCTRL); + + spin_unlock_irqrestore(&drv->lock, flags); + + return 0; +} + +static struct phy_ops rcar_gen2_phy_ops = { + .init = rcar_gen2_phy_init, + .exit = rcar_gen2_phy_exit, + .power_on = rcar_gen2_phy_power_on, + .power_off = rcar_gen2_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id rcar_gen2_phy_match_table[] = { + { .compatible = "renesas,usb-phy-r8a7790" }, + { .compatible = "renesas,usb-phy-r8a7791" }, + { } +}; +MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); + +static struct phy *rcar_gen2_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct rcar_gen2_phy_driver *drv; + struct device_node *np = args->np; + int i; + + if (!of_device_is_available(np)) { + dev_warn(dev, "Requested PHY is disabled\n"); + return ERR_PTR(-ENODEV); + } + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + for (i = 0; i < drv->num_channels; i++) { + if (np == drv->channels[i].of_node) + break; + } + + if (i >= drv->num_channels || args->args[0] >= 2) + return ERR_PTR(-ENODEV); + + return drv->channels[i].phys[args->args[0]].phy; +} + +static const u32 select_mask[] = { + [0] = USBHS_UGCTRL2_USB0SEL, + [2] = USBHS_UGCTRL2_USB2SEL, +}; + +static const u32 select_value[][PHYS_PER_CHANNEL] = { + [0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB }, + [2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 }, +}; + +static int rcar_gen2_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcar_gen2_phy_driver *drv; + struct phy_provider *provider; + struct device_node *np; + struct resource *res; + void __iomem *base; + struct clk *clk; + int i = 0; + + if (!dev->of_node) { + dev_err(dev, + "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + clk = devm_clk_get(dev, "usbhs"); + if (IS_ERR(clk)) { + dev_err(dev, "Can't get USBHS clock\n"); + return PTR_ERR(clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + spin_lock_init(&drv->lock); + + drv->clk = clk; + drv->base = base; + + drv->num_channels = of_get_child_count(dev->of_node); + drv->channels = devm_kcalloc(dev, drv->num_channels, + sizeof(struct rcar_gen2_channel), + GFP_KERNEL); + if (!drv->channels) + return -ENOMEM; + + for_each_child_of_node(dev->of_node, np) { + struct rcar_gen2_channel *channel = drv->channels + i; + u32 channel_num; + int error, n; + + channel->of_node = np; + channel->drv = drv; + channel->selected_phy = -1; + + error = of_property_read_u32(np, "reg", &channel_num); + if (error || channel_num > 2) { + dev_err(dev, "Invalid \"reg\" property\n"); + return error; + } + channel->select_mask = select_mask[channel_num]; + + for (n = 0; n < PHYS_PER_CHANNEL; n++) { + struct rcar_gen2_phy *phy = &channel->phys[n]; + + phy->channel = channel; + phy->number = n; + phy->select_value = select_value[channel_num][n]; + + phy->phy = devm_phy_create(dev, NULL, + &rcar_gen2_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + phy_set_drvdata(phy->phy, phy); + } + + i++; + } + + provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "Failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_set_drvdata(dev, drv); + + return 0; +} + +static struct platform_driver rcar_gen2_phy_driver = { + .driver = { + .name = "phy_rcar_gen2", + .of_match_table = rcar_gen2_phy_match_table, + }, + .probe = rcar_gen2_phy_probe, +}; + +module_platform_driver(rcar_gen2_phy_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car Gen2 PHY"); +MODULE_AUTHOR("Sergei Shtylyov "); diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c new file mode 100644 index 000000000..7d4c33643 --- /dev/null +++ b/drivers/phy/phy-rockchip-usb.c @@ -0,0 +1,158 @@ +/* + * Rockchip usb PHY driver + * + * Copyright (C) 2014 Yunzhi Li + * Copyright (C) 2014 ROCKCHIP, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The higher 16-bit of this register is used for write protection + * only if BIT(13 + 16) set to 1 the BIT(13) can be written. + */ +#define SIDDQ_WRITE_ENA BIT(29) +#define SIDDQ_ON BIT(13) +#define SIDDQ_OFF (0 << 13) + +struct rockchip_usb_phy { + unsigned int reg_offset; + struct regmap *reg_base; + struct clk *clk; + struct phy *phy; +}; + +static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, + bool siddq) +{ + return regmap_write(phy->reg_base, phy->reg_offset, + SIDDQ_WRITE_ENA | (siddq ? SIDDQ_ON : SIDDQ_OFF)); +} + +static int rockchip_usb_phy_power_off(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + /* Power down usb phy analog blocks by set siddq 1 */ + ret = rockchip_usb_phy_power(phy, 1); + if (ret) + return ret; + + clk_disable_unprepare(phy->clk); + + return 0; +} + +static int rockchip_usb_phy_power_on(struct phy *_phy) +{ + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + ret = clk_prepare_enable(phy->clk); + if (ret) + return ret; + + /* Power up usb phy analog blocks by set siddq 0 */ + ret = rockchip_usb_phy_power(phy, 0); + if (ret) { + clk_disable_unprepare(phy->clk); + return ret; + } + + return 0; +} + +static struct phy_ops ops = { + .power_on = rockchip_usb_phy_power_on, + .power_off = rockchip_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rockchip_usb_phy *rk_phy; + struct phy_provider *phy_provider; + struct device_node *child; + struct regmap *grf; + unsigned int reg_offset; + + grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf"); + if (IS_ERR(grf)) { + dev_err(&pdev->dev, "Missing rockchip,grf property\n"); + return PTR_ERR(grf); + } + + for_each_available_child_of_node(dev->of_node, child) { + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL); + if (!rk_phy) + return -ENOMEM; + + if (of_property_read_u32(child, "reg", ®_offset)) { + dev_err(dev, "missing reg property in node %s\n", + child->name); + return -EINVAL; + } + + rk_phy->reg_offset = reg_offset; + rk_phy->reg_base = grf; + + rk_phy->clk = of_clk_get_by_name(child, "phyclk"); + if (IS_ERR(rk_phy->clk)) + rk_phy->clk = NULL; + + rk_phy->phy = devm_phy_create(dev, child, &ops); + if (IS_ERR(rk_phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(rk_phy->phy); + } + phy_set_drvdata(rk_phy->phy, rk_phy); + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id rockchip_usb_phy_dt_ids[] = { + { .compatible = "rockchip,rk3288-usb-phy" }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids); + +static struct platform_driver rockchip_usb_driver = { + .probe = rockchip_usb_phy_probe, + .driver = { + .name = "rockchip-usb-phy", + .owner = THIS_MODULE, + .of_match_table = rockchip_usb_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_usb_driver); + +MODULE_AUTHOR("Yunzhi Li "); +MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/phy-s5pv210-usb2.c new file mode 100644 index 000000000..004d32076 --- /dev/null +++ b/drivers/phy/phy-s5pv210-usb2.c @@ -0,0 +1,187 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define S5PV210_UPHYPWR 0x0 + +#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define S5PV210_UPHYPWR_PHY0_PWR BIT(3) +#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define S5PV210_UPHYPWR_PHY0 ( \ + S5PV210_UPHYPWR_PHY0_SUSPEND | \ + S5PV210_UPHYPWR_PHY0_PWR | \ + S5PV210_UPHYPWR_PHY0_OTG_PWR) + +#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define S5PV210_UPHYPWR_PHY1_PWR BIT(7) +#define S5PV210_UPHYPWR_PHY1 ( \ + S5PV210_UPHYPWR_PHY1_SUSPEND | \ + S5PV210_UPHYPWR_PHY1_PWR) + +/* PHY clock control */ +#define S5PV210_UPHYCLK 0x4 + +#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define S5PV210_UPHYRST 0x8 + +#define S5PV210_URSTCON_PHY0 BIT(0) +#define S5PV210_URSTCON_OTG_HLINK BIT(1) +#define S5PV210_URSTCON_OTG_PHYLINK BIT(2) +#define S5PV210_URSTCON_PHY1_ALL BIT(3) +#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4) + +/* Isolation, configured in the power management unit */ +#define S5PV210_USB_ISOL_OFFSET 0x680c +#define S5PV210_USB_ISOL_DEVICE BIT(0) +#define S5PV210_USB_ISOL_HOST BIT(1) + + +enum s5pv210_phy_id { + S5PV210_DEVICE, + S5PV210_HOST, + S5PV210_NUM_PHYS, +}; + +/* + * s5pv210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 mask; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + mask = S5PV210_USB_ISOL_DEVICE; + break; + case S5PV210_HOST: + mask = S5PV210_USB_ISOL_HOST; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET, + mask, on ? 0 : mask); +} + +static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + + switch (inst->cfg->id) { + case S5PV210_DEVICE: + phypwr = S5PV210_UPHYPWR_PHY0; + rstbits = S5PV210_URSTCON_PHY0; + break; + case S5PV210_HOST: + phypwr = S5PV210_UPHYPWR_PHY1; + rstbits = S5PV210_URSTCON_PHY1_ALL | + S5PV210_URSTCON_HOST_LINK_ALL; + break; + }; + + if (on) { + writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK); + + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + + rst = readl(drv->reg_phy + S5PV210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + S5PV210_UPHYRST); + } else { + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR); + } +} + +static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_isol(inst, 0); + s5pv210_phy_pwr(inst, 1); + + return 0; +} + +static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst) +{ + s5pv210_phy_pwr(inst, 0); + s5pv210_isol(inst, 1); + + return 0; +} + +static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = { + [S5PV210_DEVICE] = { + .label = "device", + .id = S5PV210_DEVICE, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, + [S5PV210_HOST] = { + .label = "host", + .id = S5PV210_HOST, + .power_on = s5pv210_power_on, + .power_off = s5pv210_power_off, + }, +}; + +const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = { + .num_phys = ARRAY_SIZE(s5pv210_phys), + .phys = s5pv210_phys, + .rate_to_clk = s5pv210_rate_to_clk, +}; diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c new file mode 100644 index 000000000..55b699493 --- /dev/null +++ b/drivers/phy/phy-samsung-usb2.c @@ -0,0 +1,246 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "phy-samsung-usb2.h" + +static int samsung_usb2_phy_power_on(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret; + + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", + inst->cfg->label); + ret = clk_prepare_enable(drv->clk); + if (ret) + goto err_main_clk; + ret = clk_prepare_enable(drv->ref_clk); + if (ret) + goto err_instance_clk; + if (inst->cfg->power_on) { + spin_lock(&drv->lock); + ret = inst->cfg->power_on(inst); + spin_unlock(&drv->lock); + if (ret) + goto err_power_on; + } + + return 0; + +err_power_on: + clk_disable_unprepare(drv->ref_clk); +err_instance_clk: + clk_disable_unprepare(drv->clk); +err_main_clk: + return ret; +} + +static int samsung_usb2_phy_power_off(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret; + + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", + inst->cfg->label); + if (inst->cfg->power_off) { + spin_lock(&drv->lock); + ret = inst->cfg->power_off(inst); + spin_unlock(&drv->lock); + if (ret) + return ret; + } + clk_disable_unprepare(drv->ref_clk); + clk_disable_unprepare(drv->clk); + return 0; +} + +static struct phy_ops samsung_usb2_phy_ops = { + .power_on = samsung_usb2_phy_power_on, + .power_off = samsung_usb2_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *samsung_usb2_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct samsung_usb2_phy_driver *drv; + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) + return ERR_PTR(-ENODEV); + + return drv->instances[args->args[0]].phy; +} + +static const struct of_device_id samsung_usb2_phy_of_match[] = { +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos3250-usb2-phy", + .data = &exynos3250_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4210_USB2 + { + .compatible = "samsung,exynos4210-usb2-phy", + .data = &exynos4210_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos4x12-usb2-phy", + .data = &exynos4x12_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS5250_USB2 + { + .compatible = "samsung,exynos5250-usb2-phy", + .data = &exynos5250_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_S5PV210_USB2 + { + .compatible = "samsung,s5pv210-usb2-phy", + .data = &s5pv210_usb2_phy_config, + }, +#endif + { }, +}; +MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match); + +static int samsung_usb2_phy_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct samsung_usb2_phy_config *cfg; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *mem; + struct samsung_usb2_phy_driver *drv; + int i, ret; + + if (!pdev->dev.of_node) { + dev_err(dev, "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + match = of_match_node(samsung_usb2_phy_of_match, pdev->dev.of_node); + if (!match) { + dev_err(dev, "of_match_node() failed\n"); + return -EINVAL; + } + cfg = match->data; + + drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + + cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), + GFP_KERNEL); + if (!drv) + return -ENOMEM; + + dev_set_drvdata(dev, drv); + spin_lock_init(&drv->lock); + + drv->cfg = cfg; + drv->dev = dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drv->reg_phy = devm_ioremap_resource(dev, mem); + if (IS_ERR(drv->reg_phy)) { + dev_err(dev, "Failed to map register memory (phy)\n"); + return PTR_ERR(drv->reg_phy); + } + + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "samsung,pmureg-phandle"); + if (IS_ERR(drv->reg_pmu)) { + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); + return PTR_ERR(drv->reg_pmu); + } + + if (drv->cfg->has_mode_switch) { + drv->reg_sys = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, "samsung,sysreg-phandle"); + if (IS_ERR(drv->reg_sys)) { + dev_err(dev, "Failed to map system registers (via syscon)\n"); + return PTR_ERR(drv->reg_sys); + } + } + + drv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(drv->clk)) { + dev_err(dev, "Failed to get clock of phy controller\n"); + return PTR_ERR(drv->clk); + } + + drv->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(drv->ref_clk)) { + dev_err(dev, "Failed to get reference clock for the phy controller\n"); + return PTR_ERR(drv->ref_clk); + } + + drv->ref_rate = clk_get_rate(drv->ref_clk); + if (drv->cfg->rate_to_clk) { + ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val); + if (ret) + return ret; + } + + for (i = 0; i < drv->cfg->num_phys; i++) { + char *label = drv->cfg->phys[i].label; + struct samsung_usb2_phy_instance *p = &drv->instances[i]; + + dev_dbg(dev, "Creating phy \"%s\"\n", label); + p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops); + if (IS_ERR(p->phy)) { + dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n", + label); + return PTR_ERR(p->phy); + } + + p->cfg = &drv->cfg->phys[i]; + p->drv = drv; + phy_set_bus_width(p->phy, 8); + phy_set_drvdata(p->phy, p); + } + + phy_provider = devm_of_phy_provider_register(dev, + samsung_usb2_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(drv->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver samsung_usb2_phy_driver = { + .probe = samsung_usb2_phy_probe, + .driver = { + .of_match_table = samsung_usb2_phy_of_match, + .name = "samsung-usb2-phy", + } +}; + +module_platform_driver(samsung_usb2_phy_driver); +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); +MODULE_AUTHOR("Kamil Debski "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:samsung-usb2-phy"); diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h new file mode 100644 index 000000000..44bead9b8 --- /dev/null +++ b/drivers/phy/phy-samsung-usb2.h @@ -0,0 +1,71 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PHY_EXYNOS_USB2_H +#define _PHY_EXYNOS_USB2_H + +#include +#include +#include +#include +#include + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct samsung_usb2_phy_driver; +struct samsung_usb2_phy_instance; +struct samsung_usb2_phy_config; + +struct samsung_usb2_phy_instance { + const struct samsung_usb2_common_phy *cfg; + struct phy *phy; + struct samsung_usb2_phy_driver *drv; + int int_cnt; + int ext_cnt; +}; + +struct samsung_usb2_phy_driver { + const struct samsung_usb2_phy_config *cfg; + struct clk *clk; + struct clk *ref_clk; + unsigned long ref_rate; + u32 ref_reg_val; + struct device *dev; + void __iomem *reg_phy; + struct regmap *reg_pmu; + struct regmap *reg_sys; + spinlock_t lock; + struct samsung_usb2_phy_instance instances[0]; +}; + +struct samsung_usb2_common_phy { + int (*power_on)(struct samsung_usb2_phy_instance *); + int (*power_off)(struct samsung_usb2_phy_instance *); + unsigned int id; + char *label; +}; + + +struct samsung_usb2_phy_config { + const struct samsung_usb2_common_phy *phys; + int (*rate_to_clk)(unsigned long, u32 *); + unsigned int num_phys; + bool has_mode_switch; + bool has_refclk_sel; +}; + +extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config; +extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config; +#endif diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c new file mode 100644 index 000000000..65ae640cf --- /dev/null +++ b/drivers/phy/phy-spear1310-miphy.c @@ -0,0 +1,261 @@ +/* + * ST SPEAr1310-miphy driver + * + * Copyright (C) 2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr1310 Registers */ +#define SPEAR1310_PCIE_SATA_CFG 0x3A4 + #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31) + #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30) + #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29) + #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31) + #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30) + #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29) + #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27) + #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26) + #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25) + #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24) + #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23) + #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22) + #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21) + #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20) + #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19) + #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18) + #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17) + #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16) + #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11) + #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10) + #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9) + #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8) + #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7) + #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6) + #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5) + #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4) + #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3) + #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2) + #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1) + #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0) + + #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29))) + #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \ + BIT((x + 29))) + #define SPEAR1310_PCIE_CFG_VAL(x) \ + (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \ + SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \ + SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \ + SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \ + SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT) + #define SPEAR1310_SATA_CFG_VAL(x) \ + (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \ + SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \ + SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \ + SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \ + SPEAR1310_SATA##x##_CFG_TX_CLK_EN) + +#define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8 + #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31) + #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28) + #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16) + #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15) + #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12) + #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \ + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \ + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \ + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60)) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120)) + #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \ + SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ + SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25)) + +#define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC + +enum spear1310_miphy_mode { + SATA, + PCIE, +}; + +struct spear1310_miphy_priv { + /* instance id of this phy */ + u32 id; + /* phy mode: 0 for SATA 1 for PCIe */ + enum spear1310_miphy_mode mode; + /* regmap for any soc specific misc registers */ + struct regmap *misc; + /* phy struct pointer */ + struct phy *phy; +}; + +static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv) +{ + u32 val; + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE); + + switch (priv->id) { + case 0: + val = SPEAR1310_PCIE_CFG_VAL(0); + break; + case 1: + val = SPEAR1310_PCIE_CFG_VAL(1); + break; + case 2: + val = SPEAR1310_PCIE_CFG_VAL(2); + break; + default: + return -EINVAL; + } + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, + SPEAR1310_PCIE_CFG_MASK(priv->id), val); + + return 0; +} + +static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, + SPEAR1310_PCIE_CFG_MASK(priv->id), 0); + + regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, + SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0); + + return 0; +} + +static int spear1310_miphy_init(struct phy *phy) +{ + struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == PCIE) + ret = spear1310_miphy_pcie_init(priv); + + return ret; +} + +static int spear1310_miphy_exit(struct phy *phy) +{ + struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == PCIE) + ret = spear1310_miphy_pcie_exit(priv); + + return ret; +} + +static const struct of_device_id spear1310_miphy_of_match[] = { + { .compatible = "st,spear1310-miphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match); + +static struct phy_ops spear1310_miphy_ops = { + .init = spear1310_miphy_init, + .exit = spear1310_miphy_exit, + .owner = THIS_MODULE, +}; + +static struct phy *spear1310_miphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct spear1310_miphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "DT did not pass correct no of args\n"); + return ERR_PTR(-ENODEV); + } + + priv->mode = args->args[0]; + + if (priv->mode != SATA && priv->mode != PCIE) { + dev_err(dev, "DT did not pass correct phy mode\n"); + return ERR_PTR(-ENODEV); + } + + return priv->phy; +} + +static int spear1310_miphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spear1310_miphy_priv *priv; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->misc = + syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); + if (IS_ERR(priv->misc)) { + dev_err(dev, "failed to find misc regmap\n"); + return PTR_ERR(priv->misc); + } + + if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) { + dev_err(dev, "failed to find phy id\n"); + return -EINVAL; + } + + priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create SATA PCIe PHY\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, spear1310_miphy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver spear1310_miphy_driver = { + .probe = spear1310_miphy_probe, + .driver = { + .name = "spear1310-miphy", + .of_match_table = of_match_ptr(spear1310_miphy_of_match), + }, +}; + +module_platform_driver(spear1310_miphy_driver); + +MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver"); +MODULE_AUTHOR("Pratyush Anand "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c new file mode 100644 index 000000000..1a00c2817 --- /dev/null +++ b/drivers/phy/phy-spear1340-miphy.c @@ -0,0 +1,294 @@ +/* + * ST spear1340-miphy driver + * + * Copyright (C) 2014 ST Microelectronics + * Pratyush Anand + * Mohit Kumar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SPEAr1340 Registers */ +/* Power Management Registers */ +#define SPEAR1340_PCM_CFG 0x100 + #define SPEAR1340_PCM_CFG_SATA_POWER_EN BIT(11) +#define SPEAR1340_PCM_WKUP_CFG 0x104 +#define SPEAR1340_SWITCH_CTR 0x108 + +#define SPEAR1340_PERIP1_SW_RST 0x318 + #define SPEAR1340_PERIP1_SW_RSATA BIT(12) +#define SPEAR1340_PERIP2_SW_RST 0x31C +#define SPEAR1340_PERIP3_SW_RST 0x320 + +/* PCIE - SATA configuration registers */ +#define SPEAR1340_PCIE_SATA_CFG 0x424 + /* PCIE CFG MASks */ + #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11) + #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10) + #define SPEAR1340_PCIE_CFG_CORE_CLK_EN BIT(9) + #define SPEAR1340_PCIE_CFG_AUX_CLK_EN BIT(8) + #define SPEAR1340_SATA_CFG_TX_CLK_EN BIT(4) + #define SPEAR1340_SATA_CFG_RX_CLK_EN BIT(3) + #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2) + #define SPEAR1340_SATA_CFG_PM_CLK_EN BIT(1) + #define SPEAR1340_PCIE_SATA_SEL_PCIE (0) + #define SPEAR1340_PCIE_SATA_SEL_SATA (1) + #define SPEAR1340_PCIE_SATA_CFG_MASK 0xF1F + #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \ + SPEAR1340_PCIE_CFG_AUX_CLK_EN | \ + SPEAR1340_PCIE_CFG_CORE_CLK_EN | \ + SPEAR1340_PCIE_CFG_POWERUP_RESET | \ + SPEAR1340_PCIE_CFG_DEVICE_PRESENT) + #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \ + SPEAR1340_SATA_CFG_PM_CLK_EN | \ + SPEAR1340_SATA_CFG_POWERUP_RESET | \ + SPEAR1340_SATA_CFG_RX_CLK_EN | \ + SPEAR1340_SATA_CFG_TX_CLK_EN) + +#define SPEAR1340_PCIE_MIPHY_CFG 0x428 + #define SPEAR1340_MIPHY_OSC_BYPASS_EXT BIT(31) + #define SPEAR1340_MIPHY_CLK_REF_DIV2 BIT(27) + #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27) + #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27) + #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0) + #define SPEAR1340_PCIE_MIPHY_CFG_MASK 0xF80000FF + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_CLK_REF_DIV2 | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(60)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ + (SPEAR1340_MIPHY_PLL_RATIO_TOP(120)) + #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \ + (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \ + SPEAR1340_MIPHY_PLL_RATIO_TOP(25)) + +enum spear1340_miphy_mode { + SATA, + PCIE, +}; + +struct spear1340_miphy_priv { + /* phy mode: 0 for SATA 1 for PCIe */ + enum spear1340_miphy_mode mode; + /* regmap for any soc specific misc registers */ + struct regmap *misc; + /* phy struct pointer */ + struct phy *phy; +}; + +static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, + SPEAR1340_SATA_CFG_VAL); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, + SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK); + /* Switch on sata power domain */ + regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, + SPEAR1340_PCM_CFG_SATA_POWER_EN, + SPEAR1340_PCM_CFG_SATA_POWER_EN); + /* Wait for SATA power domain on */ + msleep(20); + + /* Disable PCIE SATA Controller reset */ + regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, + SPEAR1340_PERIP1_SW_RSATA, 0); + /* Wait for SATA reset de-assert completion */ + msleep(20); + + return 0; +} + +static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, 0); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); + + /* Enable PCIE SATA Controller reset */ + regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST, + SPEAR1340_PERIP1_SW_RSATA, + SPEAR1340_PERIP1_SW_RSATA); + /* Wait for SATA power domain off */ + msleep(20); + /* Switch off sata power domain */ + regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG, + SPEAR1340_PCM_CFG_SATA_POWER_EN, 0); + /* Wait for SATA reset assert completion */ + msleep(20); + + return 0; +} + +static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, + SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, + SPEAR1340_PCIE_CFG_VAL); + + return 0; +} + +static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv) +{ + regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG, + SPEAR1340_PCIE_MIPHY_CFG_MASK, 0); + regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG, + SPEAR1340_PCIE_SATA_CFG_MASK, 0); + + return 0; +} + +static int spear1340_miphy_init(struct phy *phy) +{ + struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_init(priv); + else if (priv->mode == PCIE) + ret = spear1340_miphy_pcie_init(priv); + + return ret; +} + +static int spear1340_miphy_exit(struct phy *phy) +{ + struct spear1340_miphy_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_exit(priv); + else if (priv->mode == PCIE) + ret = spear1340_miphy_pcie_exit(priv); + + return ret; +} + +static const struct of_device_id spear1340_miphy_of_match[] = { + { .compatible = "st,spear1340-miphy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match); + +static struct phy_ops spear1340_miphy_ops = { + .init = spear1340_miphy_init, + .exit = spear1340_miphy_exit, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_PM_SLEEP +static int spear1340_miphy_suspend(struct device *dev) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_exit(priv); + + return ret; +} + +static int spear1340_miphy_resume(struct device *dev) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + int ret = 0; + + if (priv->mode == SATA) + ret = spear1340_miphy_sata_init(priv); + + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend, + spear1340_miphy_resume); + +static struct phy *spear1340_miphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct spear1340_miphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "DT did not pass correct no of args\n"); + return ERR_PTR(-ENODEV); + } + + priv->mode = args->args[0]; + + if (priv->mode != SATA && priv->mode != PCIE) { + dev_err(dev, "DT did not pass correct phy mode\n"); + return ERR_PTR(-ENODEV); + } + + return priv->phy; +} + +static int spear1340_miphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct spear1340_miphy_priv *priv; + struct phy_provider *phy_provider; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->misc = + syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); + if (IS_ERR(priv->misc)) { + dev_err(dev, "failed to find misc regmap\n"); + return PTR_ERR(priv->misc); + } + + priv->phy = devm_phy_create(dev, NULL, &spear1340_miphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create SATA PCIe PHY\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, spear1340_miphy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver spear1340_miphy_driver = { + .probe = spear1340_miphy_probe, + .driver = { + .name = "spear1340-miphy", + .pm = &spear1340_miphy_pm_ops, + .of_match_table = of_match_ptr(spear1340_miphy_of_match), + }, +}; + +module_platform_driver(spear1340_miphy_driver); + +MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver"); +MODULE_AUTHOR("Pratyush Anand "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c new file mode 100644 index 000000000..1d5ae5f8e --- /dev/null +++ b/drivers/phy/phy-stih407-usb.c @@ -0,0 +1,180 @@ +/* + * Copyright (C) 2014 STMicroelectronics + * + * STMicroelectronics Generic PHY driver for STiH407 USB2. + * + * Author: Giuseppe Cavallaro + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHYPARAM_REG 1 +#define PHYCTRL_REG 2 + +/* Default PHY_SEL and REFCLKSEL configuration */ +#define STIH407_USB_PICOPHY_CTRL_PORT_CONF 0x6 +#define STIH407_USB_PICOPHY_CTRL_PORT_MASK 0x1f + +/* ports parameters overriding */ +#define STIH407_USB_PICOPHY_PARAM_DEF 0x39a4dc +#define STIH407_USB_PICOPHY_PARAM_MASK 0xffffffff + +struct stih407_usb2_picophy { + struct phy *phy; + struct regmap *regmap; + struct device *dev; + struct reset_control *rstc; + struct reset_control *rstport; + int ctrl; + int param; +}; + +static int stih407_usb2_pico_ctrl(struct stih407_usb2_picophy *phy_dev) +{ + reset_control_deassert(phy_dev->rstc); + + return regmap_update_bits(phy_dev->regmap, phy_dev->ctrl, + STIH407_USB_PICOPHY_CTRL_PORT_MASK, + STIH407_USB_PICOPHY_CTRL_PORT_CONF); +} + +static int stih407_usb2_init_port(struct phy *phy) +{ + int ret; + struct stih407_usb2_picophy *phy_dev = phy_get_drvdata(phy); + + stih407_usb2_pico_ctrl(phy_dev); + + ret = regmap_update_bits(phy_dev->regmap, + phy_dev->param, + STIH407_USB_PICOPHY_PARAM_MASK, + STIH407_USB_PICOPHY_PARAM_DEF); + if (ret) + return ret; + + return reset_control_deassert(phy_dev->rstport); +} + +static int stih407_usb2_exit_port(struct phy *phy) +{ + struct stih407_usb2_picophy *phy_dev = phy_get_drvdata(phy); + + /* + * Only port reset is asserted, phy global reset is kept untouched + * as other ports may still be active. When all ports are in reset + * state, assumption is made that power will be cut off on the phy, in + * case of suspend for instance. Theoretically, asserting individual + * reset (like here) or global reset should be equivalent. + */ + return reset_control_assert(phy_dev->rstport); +} + +static const struct phy_ops stih407_usb2_picophy_data = { + .init = stih407_usb2_init_port, + .exit = stih407_usb2_exit_port, + .owner = THIS_MODULE, +}; + +static int stih407_usb2_picophy_probe(struct platform_device *pdev) +{ + struct stih407_usb2_picophy *phy_dev; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct phy *phy; + int ret; + + phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL); + if (!phy_dev) + return -ENOMEM; + + phy_dev->dev = dev; + dev_set_drvdata(dev, phy_dev); + + phy_dev->rstc = devm_reset_control_get(dev, "global"); + if (IS_ERR(phy_dev->rstc)) { + dev_err(dev, "failed to ctrl picoPHY reset\n"); + return PTR_ERR(phy_dev->rstc); + } + + phy_dev->rstport = devm_reset_control_get(dev, "port"); + if (IS_ERR(phy_dev->rstport)) { + dev_err(dev, "failed to ctrl picoPHY reset\n"); + return PTR_ERR(phy_dev->rstport); + } + + /* Reset port by default: only deassert it in phy init */ + reset_control_assert(phy_dev->rstport); + + phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(phy_dev->regmap)) { + dev_err(dev, "No syscfg phandle specified\n"); + return PTR_ERR(phy_dev->regmap); + } + + ret = of_property_read_u32_index(np, "st,syscfg", PHYPARAM_REG, + &phy_dev->param); + if (ret) { + dev_err(dev, "can't get phyparam offset (%d)\n", ret); + return ret; + } + + ret = of_property_read_u32_index(np, "st,syscfg", PHYCTRL_REG, + &phy_dev->ctrl); + if (ret) { + dev_err(dev, "can't get phyctrl offset (%d)\n", ret); + return ret; + } + + phy = devm_phy_create(dev, NULL, &stih407_usb2_picophy_data); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Display Port PHY\n"); + return PTR_ERR(phy); + } + + phy_dev->phy = phy; + phy_set_drvdata(phy, phy_dev); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "STiH407 USB Generic picoPHY driver probed!"); + + return 0; +} + +static const struct of_device_id stih407_usb2_picophy_of_match[] = { + { .compatible = "st,stih407-usb2-phy" }, + { /*sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, stih407_usb2_picophy_of_match); + +static struct platform_driver stih407_usb2_picophy_driver = { + .probe = stih407_usb2_picophy_probe, + .driver = { + .name = "stih407-usb-genphy", + .of_match_table = stih407_usb2_picophy_of_match, + } +}; + +module_platform_driver(stih407_usb2_picophy_driver); + +MODULE_AUTHOR("Giuseppe Cavallaro "); +MODULE_DESCRIPTION("STMicroelectronics Generic picoPHY driver for STiH407"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c new file mode 100644 index 000000000..c093b472b --- /dev/null +++ b/drivers/phy/phy-stih41x-usb.c @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2014 STMicroelectronics + * + * STMicroelectronics PHY driver for STiH41x USB. + * + * Author: Maxime Coquelin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SYSCFG332 0x80 +#define SYSCFG2520 0x820 + +/** + * struct stih41x_usb_cfg - SoC specific PHY register mapping + * @syscfg: Offset in syscfg registers bank + * @cfg_mask: Bits mask for PHY configuration + * @cfg: Static configuration value for PHY + * @oscok: Notify the PHY oscillator clock is ready + * Setting this bit enable the PHY + */ +struct stih41x_usb_cfg { + u32 syscfg; + u32 cfg_mask; + u32 cfg; + u32 oscok; +}; + +/** + * struct stih41x_usb_phy - Private data for the PHY + * @dev: device for this controller + * @regmap: Syscfg registers bank in which PHY is configured + * @cfg: SoC specific PHY register mapping + * @clk: Oscillator used by the PHY + */ +struct stih41x_usb_phy { + struct device *dev; + struct regmap *regmap; + const struct stih41x_usb_cfg *cfg; + struct clk *clk; +}; + +static struct stih41x_usb_cfg stih415_usb_phy_cfg = { + .syscfg = SYSCFG332, + .cfg_mask = 0x3f, + .cfg = 0x38, + .oscok = BIT(6), +}; + +static struct stih41x_usb_cfg stih416_usb_phy_cfg = { + .syscfg = SYSCFG2520, + .cfg_mask = 0x33f, + .cfg = 0x238, + .oscok = BIT(6), +}; + +static int stih41x_usb_phy_init(struct phy *phy) +{ + struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); + + return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg); +} + +static int stih41x_usb_phy_power_on(struct phy *phy) +{ + struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); + int ret; + + ret = clk_prepare_enable(phy_dev->clk); + if (ret) { + dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n"); + return ret; + } + + ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->oscok, phy_dev->cfg->oscok); + if (ret) + clk_disable_unprepare(phy_dev->clk); + + return ret; +} + +static int stih41x_usb_phy_power_off(struct phy *phy) +{ + struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); + int ret; + + ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->oscok, 0); + if (ret) { + dev_err(phy_dev->dev, "Failed to clear oscok bit\n"); + return ret; + } + + clk_disable_unprepare(phy_dev->clk); + + return 0; +} + +static struct phy_ops stih41x_usb_phy_ops = { + .init = stih41x_usb_phy_init, + .power_on = stih41x_usb_phy_power_on, + .power_off = stih41x_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id stih41x_usb_phy_of_match[]; + +static int stih41x_usb_phy_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + struct stih41x_usb_phy *phy_dev; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct phy *phy; + + phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL); + if (!phy_dev) + return -ENOMEM; + + match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev); + if (!match) + return -ENODEV; + + phy_dev->cfg = match->data; + + phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(phy_dev->regmap)) { + dev_err(dev, "No syscfg phandle specified\n"); + return PTR_ERR(phy_dev->regmap); + } + + phy_dev->clk = devm_clk_get(dev, "osc_phy"); + if (IS_ERR(phy_dev->clk)) { + dev_err(dev, "osc_phy clk not found\n"); + return PTR_ERR(phy_dev->clk); + } + + phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops); + + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + phy_dev->dev = dev; + + phy_set_drvdata(phy, phy_dev); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id stih41x_usb_phy_of_match[] = { + { .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg }, + { .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match); + +static struct platform_driver stih41x_usb_phy_driver = { + .probe = stih41x_usb_phy_probe, + .driver = { + .name = "stih41x-usb-phy", + .of_match_table = stih41x_usb_phy_of_match, + } +}; +module_platform_driver(stih41x_usb_phy_driver); + +MODULE_AUTHOR("Maxime Coquelin "); +MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c new file mode 100644 index 000000000..a2b08f3cc --- /dev/null +++ b/drivers/phy/phy-sun4i-usb.c @@ -0,0 +1,338 @@ +/* + * Allwinner sun4i USB phy driver + * + * Copyright (C) 2014 Hans de Goede + * + * Based on code from + * Allwinner Technology Co., Ltd. + * + * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_ISCR 0x00 +#define REG_PHYCTL 0x04 +#define REG_PHYBIST 0x08 +#define REG_PHYTUNE 0x0c + +#define PHYCTL_DATA BIT(7) + +#define SUNXI_AHB_ICHR8_EN BIT(10) +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) +#define SUNXI_ULPI_BYPASS_EN BIT(0) + +/* Common Control Bits for Both PHYs */ +#define PHY_PLL_BW 0x03 +#define PHY_RES45_CAL_EN 0x0c + +/* Private Control Bits for Each PHY */ +#define PHY_TX_AMPLITUDE_TUNE 0x20 +#define PHY_TX_SLEWRATE_TUNE 0x22 +#define PHY_VBUSVALID_TH_SEL 0x25 +#define PHY_PULLUP_RES_SEL 0x27 +#define PHY_OTG_FUNC_EN 0x28 +#define PHY_VBUS_DET_EN 0x29 +#define PHY_DISCON_TH_SEL 0x2a + +#define MAX_PHYS 3 + +struct sun4i_usb_phy_data { + void __iomem *base; + struct mutex mutex; + int num_phys; + u32 disc_thresh; + struct sun4i_usb_phy { + struct phy *phy; + void __iomem *pmu; + struct regulator *vbus; + struct reset_control *reset; + struct clk *clk; + int index; + } phys[MAX_PHYS]; +}; + +#define to_sun4i_usb_phy_data(phy) \ + container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index]) + +static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, + int len) +{ + struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); + u32 temp, usbc_bit = BIT(phy->index * 2); + int i; + + mutex_lock(&phy_data->mutex); + + for (i = 0; i < len; i++) { + temp = readl(phy_data->base + REG_PHYCTL); + + /* clear the address portion */ + temp &= ~(0xff << 8); + + /* set the address */ + temp |= ((addr + i) << 8); + writel(temp, phy_data->base + REG_PHYCTL); + + /* set the data bit and clear usbc bit*/ + temp = readb(phy_data->base + REG_PHYCTL); + if (data & 0x1) + temp |= PHYCTL_DATA; + else + temp &= ~PHYCTL_DATA; + temp &= ~usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + /* pulse usbc_bit */ + temp = readb(phy_data->base + REG_PHYCTL); + temp |= usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + temp = readb(phy_data->base + REG_PHYCTL); + temp &= ~usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + data >>= 1; + } + mutex_unlock(&phy_data->mutex); +} + +static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) +{ + u32 bits, reg_value; + + if (!phy->pmu) + return; + + bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | + SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; + + reg_value = readl(phy->pmu); + + if (enable) + reg_value |= bits; + else + reg_value &= ~bits; + + writel(reg_value, phy->pmu); +} + +static int sun4i_usb_phy_init(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + int ret; + + ret = clk_prepare_enable(phy->clk); + if (ret) + return ret; + + ret = reset_control_deassert(phy->reset); + if (ret) { + clk_disable_unprepare(phy->clk); + return ret; + } + + /* Enable USB 45 Ohm resistor calibration */ + if (phy->index == 0) + sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1); + + /* Adjust PHY's magnitude and rate */ + sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); + + /* Disconnect threshold adjustment */ + sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2); + + sun4i_usb_phy_passby(phy, 1); + + return 0; +} + +static int sun4i_usb_phy_exit(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + + sun4i_usb_phy_passby(phy, 0); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk); + + return 0; +} + +static int sun4i_usb_phy_power_on(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + if (phy->vbus) + ret = regulator_enable(phy->vbus); + + return ret; +} + +static int sun4i_usb_phy_power_off(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->vbus) + regulator_disable(phy->vbus); + + return 0; +} + +static struct phy_ops sun4i_usb_phy_ops = { + .init = sun4i_usb_phy_init, + .exit = sun4i_usb_phy_exit, + .power_on = sun4i_usb_phy_power_on, + .power_off = sun4i_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *sun4i_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); + + if (args->args[0] >= data->num_phys) + return ERR_PTR(-ENODEV); + + return data->phys[args->args[0]].phy; +} + +static int sun4i_usb_phy_probe(struct platform_device *pdev) +{ + struct sun4i_usb_phy_data *data; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + bool dedicated_clocks; + struct resource *res; + int i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + mutex_init(&data->mutex); + + if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy")) + data->num_phys = 2; + else + data->num_phys = 3; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy") || + of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) + data->disc_thresh = 3; + else + data->disc_thresh = 2; + + if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) + dedicated_clocks = true; + else + dedicated_clocks = false; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); + data->base = devm_ioremap_resource(dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + for (i = 0; i < data->num_phys; i++) { + struct sun4i_usb_phy *phy = data->phys + i; + char name[16]; + + snprintf(name, sizeof(name), "usb%d_vbus", i); + phy->vbus = devm_regulator_get_optional(dev, name); + if (IS_ERR(phy->vbus)) { + if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) + return -EPROBE_DEFER; + phy->vbus = NULL; + } + + if (dedicated_clocks) + snprintf(name, sizeof(name), "usb%d_phy", i); + else + strlcpy(name, "usb_phy", sizeof(name)); + + phy->clk = devm_clk_get(dev, name); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk); + } + + snprintf(name, sizeof(name), "usb%d_reset", i); + phy->reset = devm_reset_control_get(dev, name); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset %s\n", name); + return PTR_ERR(phy->reset); + } + + if (i) { /* No pmu for usbc0 */ + snprintf(name, sizeof(name), "pmu%d", i); + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, name); + phy->pmu = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->pmu)) + return PTR_ERR(phy->pmu); + } + + phy->phy = devm_phy_create(dev, NULL, &sun4i_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy->phy); + } + + phy->index = i; + phy_set_drvdata(phy->phy, &data->phys[i]); + } + + dev_set_drvdata(dev, data); + phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id sun4i_usb_phy_of_match[] = { + { .compatible = "allwinner,sun4i-a10-usb-phy" }, + { .compatible = "allwinner,sun5i-a13-usb-phy" }, + { .compatible = "allwinner,sun6i-a31-usb-phy" }, + { .compatible = "allwinner,sun7i-a20-usb-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); + +static struct platform_driver sun4i_usb_phy_driver = { + .probe = sun4i_usb_phy_probe, + .driver = { + .of_match_table = sun4i_usb_phy_of_match, + .name = "sun4i-usb-phy", + } +}; +module_platform_driver(sun4i_usb_phy_driver); + +MODULE_DESCRIPTION("Allwinner sun4i USB phy driver"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/phy-sun9i-usb.c new file mode 100644 index 000000000..0095914a6 --- /dev/null +++ b/drivers/phy/phy-sun9i-usb.c @@ -0,0 +1,202 @@ +/* + * Allwinner sun9i USB phy driver + * + * Copyright (C) 2014-2015 Chen-Yu Tsai + * + * Based on phy-sun4i-usb.c from + * Hans de Goede + * + * and code from + * Allwinner Technology Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SUNXI_AHB_INCR16_BURST_EN BIT(11) +#define SUNXI_AHB_INCR8_BURST_EN BIT(10) +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) +#define SUNXI_ULPI_BYPASS_EN BIT(0) + +/* usb1 HSIC specific bits */ +#define SUNXI_EHCI_HS_FORCE BIT(20) +#define SUNXI_HSIC_CONNECT_DET BIT(17) +#define SUNXI_HSIC_CONNECT_INT BIT(16) +#define SUNXI_HSIC BIT(1) + +struct sun9i_usb_phy { + struct phy *phy; + void __iomem *pmu; + struct reset_control *reset; + struct clk *clk; + struct clk *hsic_clk; + enum usb_phy_interface type; +}; + +static void sun9i_usb_phy_passby(struct sun9i_usb_phy *phy, int enable) +{ + u32 bits, reg_value; + + bits = SUNXI_AHB_INCR16_BURST_EN | SUNXI_AHB_INCR8_BURST_EN | + SUNXI_AHB_INCR4_BURST_EN | SUNXI_AHB_INCRX_ALIGN_EN | + SUNXI_ULPI_BYPASS_EN; + + if (phy->type == USBPHY_INTERFACE_MODE_HSIC) + bits |= SUNXI_HSIC | SUNXI_EHCI_HS_FORCE | + SUNXI_HSIC_CONNECT_DET | SUNXI_HSIC_CONNECT_INT; + + reg_value = readl(phy->pmu); + + if (enable) + reg_value |= bits; + else + reg_value &= ~bits; + + writel(reg_value, phy->pmu); +} + +static int sun9i_usb_phy_init(struct phy *_phy) +{ + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); + int ret; + + ret = clk_prepare_enable(phy->clk); + if (ret) + goto err_clk; + + ret = clk_prepare_enable(phy->hsic_clk); + if (ret) + goto err_hsic_clk; + + ret = reset_control_deassert(phy->reset); + if (ret) + goto err_reset; + + sun9i_usb_phy_passby(phy, 1); + return 0; + +err_reset: + clk_disable_unprepare(phy->hsic_clk); + +err_hsic_clk: + clk_disable_unprepare(phy->clk); + +err_clk: + return ret; +} + +static int sun9i_usb_phy_exit(struct phy *_phy) +{ + struct sun9i_usb_phy *phy = phy_get_drvdata(_phy); + + sun9i_usb_phy_passby(phy, 0); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->hsic_clk); + clk_disable_unprepare(phy->clk); + + return 0; +} + +static struct phy_ops sun9i_usb_phy_ops = { + .init = sun9i_usb_phy_init, + .exit = sun9i_usb_phy_exit, + .owner = THIS_MODULE, +}; + +static int sun9i_usb_phy_probe(struct platform_device *pdev) +{ + struct sun9i_usb_phy *phy; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct resource *res; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->type = of_usb_get_phy_mode(np); + if (phy->type == USBPHY_INTERFACE_MODE_HSIC) { + phy->clk = devm_clk_get(dev, "hsic_480M"); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get hsic_480M clock\n"); + return PTR_ERR(phy->clk); + } + + phy->hsic_clk = devm_clk_get(dev, "hsic_12M"); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get hsic_12M clock\n"); + return PTR_ERR(phy->clk); + } + + phy->reset = devm_reset_control_get(dev, "hsic"); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset control\n"); + return PTR_ERR(phy->reset); + } + } else { + phy->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(phy->clk)) { + dev_err(dev, "failed to get phy clock\n"); + return PTR_ERR(phy->clk); + } + + phy->reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(phy->reset)) { + dev_err(dev, "failed to get reset control\n"); + return PTR_ERR(phy->reset); + } + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->pmu = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->pmu)) + return PTR_ERR(phy->pmu); + + phy->phy = devm_phy_create(dev, NULL, &sun9i_usb_phy_ops); + if (IS_ERR(phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + + phy_set_drvdata(phy->phy, phy); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id sun9i_usb_phy_of_match[] = { + { .compatible = "allwinner,sun9i-a80-usb-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun9i_usb_phy_of_match); + +static struct platform_driver sun9i_usb_phy_driver = { + .probe = sun9i_usb_phy_probe, + .driver = { + .of_match_table = sun9i_usb_phy_of_match, + .name = "sun9i-usb-phy", + } +}; +module_platform_driver(sun9i_usb_phy_driver); + +MODULE_DESCRIPTION("Allwinner sun9i USB phy driver"); +MODULE_AUTHOR("Chen-Yu Tsai "); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c new file mode 100644 index 000000000..53f295c1b --- /dev/null +++ b/drivers/phy/phy-ti-pipe3.c @@ -0,0 +1,605 @@ +/* + * phy-ti-pipe3 - PIPE3 PHY driver. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PLL_STATUS 0x00000004 +#define PLL_GO 0x00000008 +#define PLL_CONFIGURATION1 0x0000000C +#define PLL_CONFIGURATION2 0x00000010 +#define PLL_CONFIGURATION3 0x00000014 +#define PLL_CONFIGURATION4 0x00000020 + +#define PLL_REGM_MASK 0x001FFE00 +#define PLL_REGM_SHIFT 0x9 +#define PLL_REGM_F_MASK 0x0003FFFF +#define PLL_REGM_F_SHIFT 0x0 +#define PLL_REGN_MASK 0x000001FE +#define PLL_REGN_SHIFT 0x1 +#define PLL_SELFREQDCO_MASK 0x0000000E +#define PLL_SELFREQDCO_SHIFT 0x1 +#define PLL_SD_MASK 0x0003FC00 +#define PLL_SD_SHIFT 10 +#define SET_PLL_GO 0x1 +#define PLL_LDOPWDN BIT(15) +#define PLL_TICOPWDN BIT(16) +#define PLL_LOCK 0x2 +#define PLL_IDLE 0x1 + +/* + * This is an Empirical value that works, need to confirm the actual + * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status + * to be correctly reflected in the PIPE3PHY_PLL_STATUS register. + */ +#define PLL_IDLE_TIME 100 /* in milliseconds */ +#define PLL_LOCK_TIME 100 /* in milliseconds */ + +struct pipe3_dpll_params { + u16 m; + u8 n; + u8 freq:3; + u8 sd; + u32 mf; +}; + +struct pipe3_dpll_map { + unsigned long rate; + struct pipe3_dpll_params params; +}; + +struct ti_pipe3 { + void __iomem *pll_ctrl_base; + struct device *dev; + struct device *control_dev; + struct clk *wkupclk; + struct clk *sys_clk; + struct clk *refclk; + struct clk *div_clk; + struct pipe3_dpll_map *dpll_map; + bool enabled; + spinlock_t lock; /* serialize clock enable/disable */ + /* the below flag is needed specifically for SATA */ + bool refclk_enabled; +}; + +static struct pipe3_dpll_map dpll_map_usb[] = { + {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ + {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ + {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ + {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ + {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ + {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static struct pipe3_dpll_map dpll_map_sata[] = { + {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ + {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ + {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ + {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) +{ + return __raw_readl(addr + offset); +} + +static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset, + u32 data) +{ + __raw_writel(data, addr + offset); +} + +static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy) +{ + unsigned long rate; + struct pipe3_dpll_map *dpll_map = phy->dpll_map; + + rate = clk_get_rate(phy->sys_clk); + + for (; dpll_map->rate; dpll_map++) { + if (rate == dpll_map->rate) + return &dpll_map->params; + } + + dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate); + + return NULL; +} + +static int ti_pipe3_power_off(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + + omap_control_phy_power(phy->control_dev, 0); + + return 0; +} + +static int ti_pipe3_power_on(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + + omap_control_phy_power(phy->control_dev, 1); + + return 0; +} + +static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) +{ + u32 val; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME); + do { + cpu_relax(); + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_LOCK) + return 0; + } while (!time_after(jiffies, timeout)); + + dev_err(phy->dev, "DPLL failed to lock\n"); + return -EBUSY; +} + +static int ti_pipe3_dpll_program(struct ti_pipe3 *phy) +{ + u32 val; + struct pipe3_dpll_params *dpll_params; + + dpll_params = ti_pipe3_get_dpll_params(phy); + if (!dpll_params) + return -EINVAL; + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGN_MASK; + val |= dpll_params->n << PLL_REGN_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_SELFREQDCO_MASK; + val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGM_MASK; + val |= dpll_params->m << PLL_REGM_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); + val &= ~PLL_REGM_F_MASK; + val |= dpll_params->mf << PLL_REGM_F_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); + val &= ~PLL_SD_MASK; + val |= dpll_params->sd << PLL_SD_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); + + ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); + + return ti_pipe3_dpll_wait_lock(phy); +} + +static int ti_pipe3_init(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + u32 val; + int ret = 0; + + /* + * Set pcie_pcs register to 0x96 for proper functioning of phy + * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table + * 18-1804. + */ + if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { + omap_control_pcie_pcs(phy->control_dev, 0x96); + return 0; + } + + /* Bring it out of IDLE if it is IDLE */ + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + if (val & PLL_IDLE) { + val &= ~PLL_IDLE; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + ret = ti_pipe3_dpll_wait_lock(phy); + } + + /* Program the DPLL only if not locked */ + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); + if (!(val & PLL_LOCK)) + if (ti_pipe3_dpll_program(phy)) + return -EINVAL; + + return ret; +} + +static int ti_pipe3_exit(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + u32 val; + unsigned long timeout; + + /* SATA DPLL can't be powered down due to Errata i783 and PCIe + * does not have internal DPLL + */ + if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") || + of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) + return 0; + + /* Put DPLL in IDLE mode */ + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val |= PLL_IDLE; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + /* wait for LDO and Oscillator to power down */ + timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME); + do { + cpu_relax(); + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); + if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) + break; + } while (!time_after(jiffies, timeout)); + + if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { + dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n", + val); + return -EBUSY; + } + + return 0; +} +static struct phy_ops ops = { + .init = ti_pipe3_init, + .exit = ti_pipe3_exit, + .power_on = ti_pipe3_power_on, + .power_off = ti_pipe3_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id ti_pipe3_id_table[]; + +static int ti_pipe3_probe(struct platform_device *pdev) +{ + struct ti_pipe3 *phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct resource *res; + struct device_node *node = pdev->dev.of_node; + struct device_node *control_node; + struct platform_device *control_pdev; + const struct of_device_id *match; + struct clk *clk; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->dev = &pdev->dev; + spin_lock_init(&phy->lock); + + if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + match = of_match_device(ti_pipe3_id_table, &pdev->dev); + if (!match) + return -EINVAL; + + phy->dpll_map = (struct pipe3_dpll_map *)match->data; + if (!phy->dpll_map) { + dev_err(&pdev->dev, "no DPLL data\n"); + return -EINVAL; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "pll_ctrl"); + phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(phy->pll_ctrl_base)) + return PTR_ERR(phy->pll_ctrl_base); + + phy->sys_clk = devm_clk_get(phy->dev, "sysclk"); + if (IS_ERR(phy->sys_clk)) { + dev_err(&pdev->dev, "unable to get sysclk\n"); + return -EINVAL; + } + } + + phy->refclk = devm_clk_get(phy->dev, "refclk"); + if (IS_ERR(phy->refclk)) { + dev_err(&pdev->dev, "unable to get refclk\n"); + /* older DTBs have missing refclk in SATA PHY + * so don't bail out in case of SATA PHY. + */ + if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) + return PTR_ERR(phy->refclk); + } + + if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get wkupclk\n"); + return PTR_ERR(phy->wkupclk); + } + } else { + phy->wkupclk = ERR_PTR(-ENODEV); + } + + if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + + clk = devm_clk_get(phy->dev, "dpll_ref"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get dpll ref clk\n"); + return PTR_ERR(clk); + } + clk_set_rate(clk, 1500000000); + + clk = devm_clk_get(phy->dev, "dpll_ref_m2"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n"); + return PTR_ERR(clk); + } + clk_set_rate(clk, 100000000); + + clk = devm_clk_get(phy->dev, "phy-div"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "unable to get phy-div clk\n"); + return PTR_ERR(clk); + } + clk_set_rate(clk, 100000000); + + phy->div_clk = devm_clk_get(phy->dev, "div-clk"); + if (IS_ERR(phy->div_clk)) { + dev_err(&pdev->dev, "unable to get div-clk\n"); + return PTR_ERR(phy->div_clk); + } + } else { + phy->div_clk = ERR_PTR(-ENODEV); + } + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, "Failed to get control device phandle\n"); + return -EINVAL; + } + + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + + phy->control_dev = &control_pdev->dev; + + omap_control_phy_power(phy->control_dev, 0); + + platform_set_drvdata(pdev, phy); + pm_runtime_enable(phy->dev); + + generic_phy = devm_phy_create(phy->dev, NULL, &ops); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy); + phy_provider = devm_of_phy_provider_register(phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + pm_runtime_get(&pdev->dev); + + return 0; +} + +static int ti_pipe3_remove(struct platform_device *pdev) +{ + if (!pm_runtime_suspended(&pdev->dev)) + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy) +{ + if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) { + int ret; + + ret = clk_prepare_enable(phy->refclk); + if (ret) { + dev_err(phy->dev, "Failed to enable refclk %d\n", ret); + return ret; + } + phy->refclk_enabled = true; + } + + return 0; +} + +static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy) +{ + if (!IS_ERR(phy->refclk)) + clk_disable_unprepare(phy->refclk); + + phy->refclk_enabled = false; +} + +static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&phy->lock, flags); + if (phy->enabled) + goto err1; + + ret = ti_pipe3_enable_refclk(phy); + if (ret) + goto err1; + + if (!IS_ERR(phy->wkupclk)) { + ret = clk_prepare_enable(phy->wkupclk); + if (ret) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err2; + } + } + + if (!IS_ERR(phy->div_clk)) { + ret = clk_prepare_enable(phy->div_clk); + if (ret) { + dev_err(phy->dev, "Failed to enable div_clk %d\n", ret); + goto err3; + } + } + + phy->enabled = true; + spin_unlock_irqrestore(&phy->lock, flags); + return 0; + +err3: + if (!IS_ERR(phy->wkupclk)) + clk_disable_unprepare(phy->wkupclk); + +err2: + if (!IS_ERR(phy->refclk)) + clk_disable_unprepare(phy->refclk); + + ti_pipe3_disable_refclk(phy); +err1: + spin_unlock_irqrestore(&phy->lock, flags); + return ret; +} + +static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy) +{ + unsigned long flags; + + spin_lock_irqsave(&phy->lock, flags); + if (!phy->enabled) { + spin_unlock_irqrestore(&phy->lock, flags); + return; + } + + if (!IS_ERR(phy->wkupclk)) + clk_disable_unprepare(phy->wkupclk); + /* Don't disable refclk for SATA PHY due to Errata i783 */ + if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) + ti_pipe3_disable_refclk(phy); + if (!IS_ERR(phy->div_clk)) + clk_disable_unprepare(phy->div_clk); + phy->enabled = false; + spin_unlock_irqrestore(&phy->lock, flags); +} + +static int ti_pipe3_runtime_suspend(struct device *dev) +{ + struct ti_pipe3 *phy = dev_get_drvdata(dev); + + ti_pipe3_disable_clocks(phy); + return 0; +} + +static int ti_pipe3_runtime_resume(struct device *dev) +{ + struct ti_pipe3 *phy = dev_get_drvdata(dev); + int ret = 0; + + ret = ti_pipe3_enable_clocks(phy); + return ret; +} + +static int ti_pipe3_suspend(struct device *dev) +{ + struct ti_pipe3 *phy = dev_get_drvdata(dev); + + ti_pipe3_disable_clocks(phy); + return 0; +} + +static int ti_pipe3_resume(struct device *dev) +{ + struct ti_pipe3 *phy = dev_get_drvdata(dev); + int ret; + + ret = ti_pipe3_enable_clocks(phy); + if (ret) + return ret; + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; +} +#endif + +static const struct dev_pm_ops ti_pipe3_pm_ops = { + SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend, + ti_pipe3_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume) +}; + +static const struct of_device_id ti_pipe3_id_table[] = { + { + .compatible = "ti,phy-usb3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,omap-usb3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,phy-pipe3-sata", + .data = dpll_map_sata, + }, + { + .compatible = "ti,phy-pipe3-pcie", + }, + {} +}; +MODULE_DEVICE_TABLE(of, ti_pipe3_id_table); + +static struct platform_driver ti_pipe3_driver = { + .probe = ti_pipe3_probe, + .remove = ti_pipe3_remove, + .driver = { + .name = "ti-pipe3", + .pm = &ti_pipe3_pm_ops, + .of_match_table = ti_pipe3_id_table, + }, +}; + +module_platform_driver(ti_pipe3_driver); + +MODULE_ALIAS("platform:ti_pipe3"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("TI PIPE3 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c new file mode 100644 index 000000000..8882afbef --- /dev/null +++ b/drivers/phy/phy-twl4030-usb.c @@ -0,0 +1,808 @@ +/* + * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004-2007 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * - HS USB ULPI mode works. + * - 3-pin mode support may be added in future. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register defines */ + +#define MCPC_CTRL 0x30 +#define MCPC_CTRL_RTSOL (1 << 7) +#define MCPC_CTRL_EXTSWR (1 << 6) +#define MCPC_CTRL_EXTSWC (1 << 5) +#define MCPC_CTRL_VOICESW (1 << 4) +#define MCPC_CTRL_OUT64K (1 << 3) +#define MCPC_CTRL_RTSCTSSW (1 << 2) +#define MCPC_CTRL_HS_UART (1 << 0) + +#define MCPC_IO_CTRL 0x33 +#define MCPC_IO_CTRL_MICBIASEN (1 << 5) +#define MCPC_IO_CTRL_CTS_NPU (1 << 4) +#define MCPC_IO_CTRL_RXD_PU (1 << 3) +#define MCPC_IO_CTRL_TXDTYP (1 << 2) +#define MCPC_IO_CTRL_CTSTYP (1 << 1) +#define MCPC_IO_CTRL_RTSTYP (1 << 0) + +#define MCPC_CTRL2 0x36 +#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) + +#define OTHER_FUNC_CTRL 0x80 +#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) +#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) + +#define OTHER_IFC_CTRL 0x83 +#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) +#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) +#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) +#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) +#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) +#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) + +#define OTHER_INT_EN_RISE 0x86 +#define OTHER_INT_EN_FALL 0x89 +#define OTHER_INT_STS 0x8C +#define OTHER_INT_LATCH 0x8D +#define OTHER_INT_VB_SESS_VLD (1 << 7) +#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ +#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ +#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ +#define OTHER_INT_MANU (1 << 1) +#define OTHER_INT_ABNORMAL_STRESS (1 << 0) + +#define ID_STATUS 0x96 +#define ID_RES_FLOAT (1 << 4) +#define ID_RES_440K (1 << 3) +#define ID_RES_200K (1 << 2) +#define ID_RES_102K (1 << 1) +#define ID_RES_GND (1 << 0) + +#define POWER_CTRL 0xAC +#define POWER_CTRL_OTG_ENAB (1 << 5) + +#define OTHER_IFC_CTRL2 0xAF +#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) +#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) +#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) + +#define REG_CTRL_EN 0xB2 +#define REG_CTRL_ERROR 0xB5 +#define ULPI_I2C_CONFLICT_INTEN (1 << 0) + +#define OTHER_FUNC_CTRL2 0xB8 +#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) + +/* following registers do not have separate _clr and _set registers */ +#define VBUS_DEBOUNCE 0xC0 +#define ID_DEBOUNCE 0xC1 +#define VBAT_TIMER 0xD3 +#define PHY_PWR_CTRL 0xFD +#define PHY_PWR_PHYPWD (1 << 0) +#define PHY_CLK_CTRL 0xFE +#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) +#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) +#define REQ_PHY_DPLL_CLK (1 << 0) +#define PHY_CLK_CTRL_STS 0xFF +#define PHY_DPLL_CLK (1 << 0) + +/* In module TWL_MODULE_PM_MASTER */ +#define STS_HW_CONDITIONS 0x0F + +/* In module TWL_MODULE_PM_RECEIVER */ +#define VUSB_DEDICATED1 0x7D +#define VUSB_DEDICATED2 0x7E +#define VUSB1V5_DEV_GRP 0x71 +#define VUSB1V5_TYPE 0x72 +#define VUSB1V5_REMAP 0x73 +#define VUSB1V8_DEV_GRP 0x74 +#define VUSB1V8_TYPE 0x75 +#define VUSB1V8_REMAP 0x76 +#define VUSB3V1_DEV_GRP 0x77 +#define VUSB3V1_TYPE 0x78 +#define VUSB3V1_REMAP 0x79 + +/* In module TWL4030_MODULE_INTBR */ +#define PMBR1 0x0D +#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) + +struct twl4030_usb { + struct usb_phy phy; + struct device *dev; + + /* TWL4030 internal USB regulator supplies */ + struct regulator *usb1v5; + struct regulator *usb1v8; + struct regulator *usb3v1; + + /* for vbus reporting with irqs disabled */ + struct mutex lock; + + /* pin configuration */ + enum twl4030_usb_mode usb_mode; + + int irq; + enum omap_musb_vbus_id_status linkstat; + bool vbus_supplied; + + struct delayed_work id_workaround_work; +}; + +/* internal define on top of container_of */ +#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy) + +/*-------------------------------------------------------------------------*/ + +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, + u8 module, u8 data, u8 address) +{ + u8 check; + + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 1, module, address, check, data); + + /* Failed once: Try again */ + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 2, module, address, check, data); + + /* Failed again: Return error */ + return -EBUSY; +} + +#define twl4030_usb_write_verify(twl, address, data) \ + twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) + +static inline int twl4030_usb_write(struct twl4030_usb *twl, + u8 address, u8 data) +{ + int ret = 0; + + ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); + if (ret < 0) + dev_dbg(twl->dev, + "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); + return ret; +} + +static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) +{ + u8 data; + int ret = 0; + + ret = twl_i2c_read_u8(module, &data, address); + if (ret >= 0) + ret = data; + else + dev_dbg(twl->dev, + "TWL4030:readb[0x%x,0x%x] Error %d\n", + module, address, ret); + + return ret; +} + +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) +{ + return twl4030_readb(twl, TWL_MODULE_USB, address); +} + +/*-------------------------------------------------------------------------*/ + +static inline int +twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_SET(reg), bits); +} + +static inline int +twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_CLR(reg), bits); +} + +/*-------------------------------------------------------------------------*/ + +static bool twl4030_is_driving_vbus(struct twl4030_usb *twl) +{ + int ret; + + ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS); + if (ret < 0 || !(ret & PHY_DPLL_CLK)) + /* + * if clocks are off, registers are not updated, + * but we can assume we don't drive VBUS in this case + */ + return false; + + ret = twl4030_usb_read(twl, ULPI_OTG_CTRL); + if (ret < 0) + return false; + + return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false; +} + +static enum omap_musb_vbus_id_status + twl4030_usb_linkstat(struct twl4030_usb *twl) +{ + int status; + enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; + + twl->vbus_supplied = false; + + /* + * For ID/VBUS sensing, see manual section 15.4.8 ... + * except when using only battery backup power, two + * comparators produce VBUS_PRES and ID_PRES signals, + * which don't match docs elsewhere. But ... BIT(7) + * and BIT(2) of STS_HW_CONDITIONS, respectively, do + * seem to match up. If either is true the USB_PRES + * signal is active, the OTG module is activated, and + * its interrupt may be raised (may wake the system). + */ + status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); + if (status < 0) + dev_err(twl->dev, "USB link status err %d\n", status); + else if (status & (BIT(7) | BIT(2))) { + if (status & BIT(7)) { + if (twl4030_is_driving_vbus(twl)) + status &= ~BIT(7); + else + twl->vbus_supplied = true; + } + + if (status & BIT(2)) + linkstat = OMAP_MUSB_ID_GROUND; + else if (status & BIT(7)) + linkstat = OMAP_MUSB_VBUS_VALID; + else + linkstat = OMAP_MUSB_VBUS_OFF; + } else { + if (twl->linkstat != OMAP_MUSB_UNKNOWN) + linkstat = OMAP_MUSB_VBUS_OFF; + } + + dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", + status, status, linkstat); + + /* REVISIT this assumes host and peripheral controllers + * are registered, and that both are active... + */ + + return linkstat; +} + +static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) +{ + twl->usb_mode = mode; + + switch (mode) { + case T2_USB_MODE_ULPI: + twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, + ULPI_IFC_CTRL_CARKITMODE); + twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, + ULPI_FUNC_CTRL_XCVRSEL_MASK | + ULPI_FUNC_CTRL_OPMODE_MASK); + break; + case -1: + /* FIXME: power on defaults */ + break; + default: + dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", + mode); + break; + } +} + +static void twl4030_i2c_access(struct twl4030_usb *twl, int on) +{ + unsigned long timeout; + int val = twl4030_usb_read(twl, PHY_CLK_CTRL); + + if (val >= 0) { + if (on) { + /* enable DPLL to access PHY registers over I2C */ + val |= REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + + timeout = jiffies + HZ; + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK) + && time_before(jiffies, timeout)) + udelay(10); + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK)) + dev_err(twl->dev, "Timeout setting T2 HSUSB " + "PHY DPLL clock\n"); + } else { + /* let ULPI control the DPLL clock */ + val &= ~REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + } + } +} + +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; + + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static int twl4030_usb_runtime_suspend(struct device *dev) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + + dev_dbg(twl->dev, "%s\n", __func__); + if (pm_runtime_suspended(dev)) + return 0; + + __twl4030_phy_power(twl, 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); + + return 0; +} + +static int twl4030_usb_runtime_resume(struct device *dev) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + int res; + + dev_dbg(twl->dev, "%s\n", __func__); + if (pm_runtime_active(dev)) + return 0; + + res = regulator_enable(twl->usb3v1); + if (res) + dev_err(twl->dev, "Failed to enable usb3v1\n"); + + res = regulator_enable(twl->usb1v8); + if (res) + dev_err(twl->dev, "Failed to enable usb1v8\n"); + + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + + res = regulator_enable(twl->usb1v5); + if (res) + dev_err(twl->dev, "Failed to enable usb1v5\n"); + + __twl4030_phy_power(twl, 1); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | + (PHY_CLK_CTRL_CLOCKGATING_EN | + PHY_CLK_CTRL_CLK32K_EN)); + + return 0; +} + +static int twl4030_phy_power_off(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + dev_dbg(twl->dev, "%s\n", __func__); + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_autosuspend(twl->dev); + + return 0; +} + +static int twl4030_phy_power_on(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + dev_dbg(twl->dev, "%s\n", __func__); + pm_runtime_get_sync(twl->dev); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); + schedule_delayed_work(&twl->id_workaround_work, 0); + + return 0; +} + +static int twl4030_usb_ldo_init(struct twl4030_usb *twl) +{ + /* Enable writing to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); + + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); + + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ + + /* input to VUSB3V1 LDO is from VBAT, not VBUS */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + + /* Initialize 3.1V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + + twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1"); + if (IS_ERR(twl->usb3v1)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + + /* Initialize 1.5V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + + twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5"); + if (IS_ERR(twl->usb1v5)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + + /* Initialize 1.8V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + + twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8"); + if (IS_ERR(twl->usb1v8)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + + /* disable access to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); + + return 0; +} + +static ssize_t twl4030_usb_vbus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + int ret = -EINVAL; + + mutex_lock(&twl->lock); + ret = sprintf(buf, "%s\n", + twl->vbus_supplied ? "on" : "off"); + mutex_unlock(&twl->lock); + + return ret; +} +static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); + +static irqreturn_t twl4030_usb_irq(int irq, void *_twl) +{ + struct twl4030_usb *twl = _twl; + enum omap_musb_vbus_id_status status; + bool status_changed = false; + + status = twl4030_usb_linkstat(twl); + + mutex_lock(&twl->lock); + if (status >= 0 && status != twl->linkstat) { + twl->linkstat = status; + status_changed = true; + } + mutex_unlock(&twl->lock); + + if (status_changed) { + /* FIXME add a set_power() method so that B-devices can + * configure the charger appropriately. It's not always + * correct to consume VBUS power, and how much current to + * consume is a function of the USB configuration chosen + * by the host. + * + * REVISIT usb_gadget_vbus_connect(...) as needed, ditto + * its disconnect() sibling, when changing to/from the + * USB_LINK_VBUS state. musb_hdrc won't care until it + * starts to handle softconnect right. + */ + if ((status == OMAP_MUSB_VBUS_VALID) || + (status == OMAP_MUSB_ID_GROUND)) { + if (pm_runtime_suspended(twl->dev)) + pm_runtime_get_sync(twl->dev); + } else { + if (pm_runtime_active(twl->dev)) { + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_autosuspend(twl->dev); + } + } + omap_musb_mailbox(status); + } + + /* don't schedule during sleep - irq works right then */ + if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) { + cancel_delayed_work(&twl->id_workaround_work); + schedule_delayed_work(&twl->id_workaround_work, HZ); + } + + if (irq) + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + + return IRQ_HANDLED; +} + +static void twl4030_id_workaround_work(struct work_struct *work) +{ + struct twl4030_usb *twl = container_of(work, struct twl4030_usb, + id_workaround_work.work); + + twl4030_usb_irq(0, twl); +} + +static int twl4030_phy_init(struct phy *phy) +{ + struct twl4030_usb *twl = phy_get_drvdata(phy); + + pm_runtime_get_sync(twl->dev); + schedule_delayed_work(&twl->id_workaround_work, 0); + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_autosuspend(twl->dev); + + return 0; +} + +static int twl4030_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + otg->gadget = gadget; + if (!gadget) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + otg->host = host; + if (!host) + otg->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static const struct phy_ops ops = { + .init = twl4030_phy_init, + .power_on = twl4030_phy_power_on, + .power_off = twl4030_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct dev_pm_ops twl4030_usb_pm_ops = { + SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend, + twl4030_usb_runtime_resume, NULL) +}; + +static int twl4030_usb_probe(struct platform_device *pdev) +{ + struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev); + struct twl4030_usb *twl; + struct phy *phy; + int status, err; + struct usb_otg *otg; + struct device_node *np = pdev->dev.of_node; + struct phy_provider *phy_provider; + + twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL); + if (!twl) + return -ENOMEM; + + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) { + twl->usb_mode = pdata->usb_mode; + } else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + twl->dev = &pdev->dev; + twl->irq = platform_get_irq(pdev, 0); + twl->vbus_supplied = false; + twl->linkstat = OMAP_MUSB_UNKNOWN; + + twl->phy.dev = twl->dev; + twl->phy.label = "twl4030"; + twl->phy.otg = otg; + twl->phy.type = USB_PHY_TYPE_USB2; + + otg->usb_phy = &twl->phy; + otg->set_host = twl4030_set_host; + otg->set_peripheral = twl4030_set_peripheral; + + phy = devm_phy_create(twl->dev, NULL, &ops); + if (IS_ERR(phy)) { + dev_dbg(&pdev->dev, "Failed to create PHY\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, twl); + + phy_provider = devm_of_phy_provider_register(twl->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + /* init mutex for workqueue */ + mutex_init(&twl->lock); + + INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work); + + err = twl4030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + return err; + } + usb_add_phy_dev(&twl->phy); + + platform_set_drvdata(pdev, twl); + if (device_create_file(&pdev->dev, &dev_attr_vbus)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); + pm_runtime_enable(&pdev->dev); + + /* Our job is to use irqs and status from the power module + * to keep the transceiver disabled when nothing's connected. + * + * FIXME we actually shouldn't start enabling it until the + * USB controller drivers have said they're ready, by calling + * set_host() and/or set_peripheral() ... OTG_capable boards + * need both handles, otherwise just one suffices. + */ + status = devm_request_threaded_irq(twl->dev, twl->irq, NULL, + twl4030_usb_irq, IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl); + if (status < 0) { + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq, status); + return status; + } + + if (pdata) + err = phy_create_lookup(phy, "usb", "musb-hdrc.0"); + if (err) + return err; + + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(twl->dev); + + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); + return 0; +} + +static int twl4030_usb_remove(struct platform_device *pdev) +{ + struct twl4030_usb *twl = platform_get_drvdata(pdev); + int val; + + pm_runtime_get_sync(twl->dev); + cancel_delayed_work(&twl->id_workaround_work); + device_remove_file(twl->dev, &dev_attr_vbus); + + /* set transceiver mode to power on defaults */ + twl4030_usb_set_mode(twl, -1); + + /* autogate 60MHz ULPI clock, + * clear dpll clock request for i2c access, + * disable 32KHz + */ + val = twl4030_usb_read(twl, PHY_CLK_CTRL); + if (val >= 0) { + val |= PHY_CLK_CTRL_CLOCKGATING_EN; + val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); + } + + /* disable complete OTG block */ + twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put(twl->dev); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + +static struct platform_driver twl4030_usb_driver = { + .probe = twl4030_usb_probe, + .remove = twl4030_usb_remove, + .driver = { + .name = "twl4030_usb", + .pm = &twl4030_usb_pm_ops, + .of_match_table = of_match_ptr(twl4030_usb_id_table), + }, +}; + +static int __init twl4030_usb_init(void) +{ + return platform_driver_register(&twl4030_usb_driver); +} +subsys_initcall(twl4030_usb_init); + +static void __exit twl4030_usb_exit(void) +{ + platform_driver_unregister(&twl4030_usb_driver); +} +module_exit(twl4030_usb_exit); + +MODULE_ALIAS("platform:twl4030_usb"); +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); +MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c new file mode 100644 index 000000000..385362e5b --- /dev/null +++ b/drivers/phy/phy-xgene.c @@ -0,0 +1,1735 @@ +/* + * AppliedMicro X-Gene Multi-purpose PHY driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Loc Ho + * Tuan Phan + * Suman Tripathi + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * The APM X-Gene PHY consists of two PLL clock macro's (CMU) and lanes. + * The first PLL clock macro is used for internal reference clock. The second + * PLL clock macro is used to generate the clock for the PHY. This driver + * configures the first PLL CMU, the second PLL CMU, and programs the PHY to + * operate according to the mode of operation. The first PLL CMU is only + * required if internal clock is enabled. + * + * Logical Layer Out Of HW module units: + * + * ----------------- + * | Internal | |------| + * | Ref PLL CMU |----| | ------------- --------- + * ------------ ---- | MUX |-----|PHY PLL CMU|----| Serdes| + * | | | | --------- + * External Clock ------| | ------------- + * |------| + * + * The Ref PLL CMU CSR (Configuration System Registers) is accessed + * indirectly from the SDS offset at 0x2000. It is only required for + * internal reference clock. + * The PHY PLL CMU CSR is accessed indirectly from the SDS offset at 0x0000. + * The Serdes CSR is accessed indirectly from the SDS offset at 0x0400. + * + * The Ref PLL CMU can be located within the same PHY IP or outside the PHY IP + * due to shared Ref PLL CMU. For PHY with Ref PLL CMU shared with another IP, + * it is located outside the PHY IP. This is the case for the PHY located + * at 0x1f23a000 (SATA Port 4/5). For such PHY, another resource is required + * to located the SDS/Ref PLL CMU module and its clock for that IP enabled. + * + * Currently, this driver only supports Gen3 SATA mode with external clock. + */ +#include +#include +#include +#include +#include +#include + +/* Max 2 lanes per a PHY unit */ +#define MAX_LANE 2 + +/* Register offset inside the PHY */ +#define SERDES_PLL_INDIRECT_OFFSET 0x0000 +#define SERDES_PLL_REF_INDIRECT_OFFSET 0x2000 +#define SERDES_INDIRECT_OFFSET 0x0400 +#define SERDES_LANE_STRIDE 0x0200 + +/* Some default Serdes parameters */ +#define DEFAULT_SATA_TXBOOST_GAIN { 0x1e, 0x1e, 0x1e } +#define DEFAULT_SATA_TXEYEDIRECTION { 0x0, 0x0, 0x0 } +#define DEFAULT_SATA_TXEYETUNING { 0xa, 0xa, 0xa } +#define DEFAULT_SATA_SPD_SEL { 0x1, 0x3, 0x7 } +#define DEFAULT_SATA_TXAMP { 0x8, 0x8, 0x8 } +#define DEFAULT_SATA_TXCN1 { 0x2, 0x2, 0x2 } +#define DEFAULT_SATA_TXCN2 { 0x0, 0x0, 0x0 } +#define DEFAULT_SATA_TXCP1 { 0xa, 0xa, 0xa } + +#define SATA_SPD_SEL_GEN3 0x7 +#define SATA_SPD_SEL_GEN2 0x3 +#define SATA_SPD_SEL_GEN1 0x1 + +#define SSC_DISABLE 0 +#define SSC_ENABLE 1 + +#define FBDIV_VAL_50M 0x77 +#define REFDIV_VAL_50M 0x1 +#define FBDIV_VAL_100M 0x3B +#define REFDIV_VAL_100M 0x0 + +/* SATA Clock/Reset CSR */ +#define SATACLKENREG 0x00000000 +#define SATA0_CORE_CLKEN 0x00000002 +#define SATA1_CORE_CLKEN 0x00000004 +#define SATASRESETREG 0x00000004 +#define SATA_MEM_RESET_MASK 0x00000020 +#define SATA_MEM_RESET_RD(src) (((src) & 0x00000020) >> 5) +#define SATA_SDS_RESET_MASK 0x00000004 +#define SATA_CSR_RESET_MASK 0x00000001 +#define SATA_CORE_RESET_MASK 0x00000002 +#define SATA_PMCLK_RESET_MASK 0x00000010 +#define SATA_PCLK_RESET_MASK 0x00000008 + +/* SDS CSR used for PHY Indirect access */ +#define SATA_ENET_SDS_PCS_CTL0 0x00000000 +#define REGSPEC_CFG_I_TX_WORDMODE0_SET(dst, src) \ + (((dst) & ~0x00070000) | (((u32) (src) << 16) & 0x00070000)) +#define REGSPEC_CFG_I_RX_WORDMODE0_SET(dst, src) \ + (((dst) & ~0x00e00000) | (((u32) (src) << 21) & 0x00e00000)) +#define SATA_ENET_SDS_CTL0 0x0000000c +#define REGSPEC_CFG_I_CUSTOMER_PIN_MODE0_SET(dst, src) \ + (((dst) & ~0x00007fff) | (((u32) (src)) & 0x00007fff)) +#define SATA_ENET_SDS_CTL1 0x00000010 +#define CFG_I_SPD_SEL_CDR_OVR1_SET(dst, src) \ + (((dst) & ~0x0000000f) | (((u32) (src)) & 0x0000000f)) +#define SATA_ENET_SDS_RST_CTL 0x00000024 +#define SATA_ENET_SDS_IND_CMD_REG 0x0000003c +#define CFG_IND_WR_CMD_MASK 0x00000001 +#define CFG_IND_RD_CMD_MASK 0x00000002 +#define CFG_IND_CMD_DONE_MASK 0x00000004 +#define CFG_IND_ADDR_SET(dst, src) \ + (((dst) & ~0x003ffff0) | (((u32) (src) << 4) & 0x003ffff0)) +#define SATA_ENET_SDS_IND_RDATA_REG 0x00000040 +#define SATA_ENET_SDS_IND_WDATA_REG 0x00000044 +#define SATA_ENET_CLK_MACRO_REG 0x0000004c +#define I_RESET_B_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src)) & 0x00000001)) +#define I_PLL_FBDIV_SET(dst, src) \ + (((dst) & ~0x001ff000) | (((u32) (src) << 12) & 0x001ff000)) +#define I_CUSTOMEROV_SET(dst, src) \ + (((dst) & ~0x00000f80) | (((u32) (src) << 7) & 0x00000f80)) +#define O_PLL_LOCK_RD(src) (((src) & 0x40000000) >> 30) +#define O_PLL_READY_RD(src) (((src) & 0x80000000) >> 31) + +/* PLL Clock Macro Unit (CMU) CSR accessing from SDS indirectly */ +#define CMU_REG0 0x00000 +#define CMU_REG0_PLL_REF_SEL_MASK 0x00002000 +#define CMU_REG0_PLL_REF_SEL_SET(dst, src) \ + (((dst) & ~0x00002000) | (((u32) (src) << 13) & 0x00002000)) +#define CMU_REG0_PDOWN_MASK 0x00004000 +#define CMU_REG0_CAL_COUNT_RESOL_SET(dst, src) \ + (((dst) & ~0x000000e0) | (((u32) (src) << 5) & 0x000000e0)) +#define CMU_REG1 0x00002 +#define CMU_REG1_PLL_CP_SET(dst, src) \ + (((dst) & ~0x00003c00) | (((u32) (src) << 10) & 0x00003c00)) +#define CMU_REG1_PLL_MANUALCAL_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define CMU_REG1_PLL_CP_SEL_SET(dst, src) \ + (((dst) & ~0x000003e0) | (((u32) (src) << 5) & 0x000003e0)) +#define CMU_REG1_REFCLK_CMOS_SEL_MASK 0x00000001 +#define CMU_REG1_REFCLK_CMOS_SEL_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define CMU_REG2 0x00004 +#define CMU_REG2_PLL_REFDIV_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define CMU_REG2_PLL_LFRES_SET(dst, src) \ + (((dst) & ~0x0000001e) | (((u32) (src) << 1) & 0x0000001e)) +#define CMU_REG2_PLL_FBDIV_SET(dst, src) \ + (((dst) & ~0x00003fe0) | (((u32) (src) << 5) & 0x00003fe0)) +#define CMU_REG3 0x00006 +#define CMU_REG3_VCOVARSEL_SET(dst, src) \ + (((dst) & ~0x0000000f) | (((u32) (src) << 0) & 0x0000000f)) +#define CMU_REG3_VCO_MOMSEL_INIT_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define CMU_REG3_VCO_MANMOMSEL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define CMU_REG4 0x00008 +#define CMU_REG5 0x0000a +#define CMU_REG5_PLL_LFSMCAP_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define CMU_REG5_PLL_LOCK_RESOLUTION_SET(dst, src) \ + (((dst) & ~0x0000000e) | (((u32) (src) << 1) & 0x0000000e)) +#define CMU_REG5_PLL_LFCAP_SET(dst, src) \ + (((dst) & ~0x00003000) | (((u32) (src) << 12) & 0x00003000)) +#define CMU_REG5_PLL_RESETB_MASK 0x00000001 +#define CMU_REG6 0x0000c +#define CMU_REG6_PLL_VREGTRIM_SET(dst, src) \ + (((dst) & ~0x00000600) | (((u32) (src) << 9) & 0x00000600)) +#define CMU_REG6_MAN_PVT_CAL_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define CMU_REG7 0x0000e +#define CMU_REG7_PLL_CALIB_DONE_RD(src) ((0x00004000 & (u32) (src)) >> 14) +#define CMU_REG7_VCO_CAL_FAIL_RD(src) ((0x00000c00 & (u32) (src)) >> 10) +#define CMU_REG8 0x00010 +#define CMU_REG9 0x00012 +#define CMU_REG9_WORD_LEN_8BIT 0x000 +#define CMU_REG9_WORD_LEN_10BIT 0x001 +#define CMU_REG9_WORD_LEN_16BIT 0x002 +#define CMU_REG9_WORD_LEN_20BIT 0x003 +#define CMU_REG9_WORD_LEN_32BIT 0x004 +#define CMU_REG9_WORD_LEN_40BIT 0x005 +#define CMU_REG9_WORD_LEN_64BIT 0x006 +#define CMU_REG9_WORD_LEN_66BIT 0x007 +#define CMU_REG9_TX_WORD_MODE_CH1_SET(dst, src) \ + (((dst) & ~0x00000380) | (((u32) (src) << 7) & 0x00000380)) +#define CMU_REG9_TX_WORD_MODE_CH0_SET(dst, src) \ + (((dst) & ~0x00000070) | (((u32) (src) << 4) & 0x00000070)) +#define CMU_REG9_PLL_POST_DIVBY2_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define CMU_REG9_VBG_BYPASSB_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define CMU_REG9_IGEN_BYPASS_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define CMU_REG10 0x00014 +#define CMU_REG10_VREG_REFSEL_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define CMU_REG11 0x00016 +#define CMU_REG12 0x00018 +#define CMU_REG12_STATE_DELAY9_SET(dst, src) \ + (((dst) & ~0x000000f0) | (((u32) (src) << 4) & 0x000000f0)) +#define CMU_REG13 0x0001a +#define CMU_REG14 0x0001c +#define CMU_REG15 0x0001e +#define CMU_REG16 0x00020 +#define CMU_REG16_PVT_DN_MAN_ENA_MASK 0x00000001 +#define CMU_REG16_PVT_UP_MAN_ENA_MASK 0x00000002 +#define CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(dst, src) \ + (((dst) & ~0x0000001c) | (((u32) (src) << 2) & 0x0000001c)) +#define CMU_REG16_CALIBRATION_DONE_OVERRIDE_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define CMU_REG16_BYPASS_PLL_LOCK_SET(dst, src) \ + (((dst) & ~0x00000020) | (((u32) (src) << 5) & 0x00000020)) +#define CMU_REG17 0x00022 +#define CMU_REG17_PVT_CODE_R2A_SET(dst, src) \ + (((dst) & ~0x00007f00) | (((u32) (src) << 8) & 0x00007f00)) +#define CMU_REG17_RESERVED_7_SET(dst, src) \ + (((dst) & ~0x000000e0) | (((u32) (src) << 5) & 0x000000e0)) +#define CMU_REG17_PVT_TERM_MAN_ENA_MASK 0x00008000 +#define CMU_REG18 0x00024 +#define CMU_REG19 0x00026 +#define CMU_REG20 0x00028 +#define CMU_REG21 0x0002a +#define CMU_REG22 0x0002c +#define CMU_REG23 0x0002e +#define CMU_REG24 0x00030 +#define CMU_REG25 0x00032 +#define CMU_REG26 0x00034 +#define CMU_REG26_FORCE_PLL_LOCK_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define CMU_REG27 0x00036 +#define CMU_REG28 0x00038 +#define CMU_REG29 0x0003a +#define CMU_REG30 0x0003c +#define CMU_REG30_LOCK_COUNT_SET(dst, src) \ + (((dst) & ~0x00000006) | (((u32) (src) << 1) & 0x00000006)) +#define CMU_REG30_PCIE_MODE_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define CMU_REG31 0x0003e +#define CMU_REG32 0x00040 +#define CMU_REG32_FORCE_VCOCAL_START_MASK 0x00004000 +#define CMU_REG32_PVT_CAL_WAIT_SEL_SET(dst, src) \ + (((dst) & ~0x00000006) | (((u32) (src) << 1) & 0x00000006)) +#define CMU_REG32_IREF_ADJ_SET(dst, src) \ + (((dst) & ~0x00000180) | (((u32) (src) << 7) & 0x00000180)) +#define CMU_REG33 0x00042 +#define CMU_REG34 0x00044 +#define CMU_REG34_VCO_CAL_VTH_LO_MAX_SET(dst, src) \ + (((dst) & ~0x0000000f) | (((u32) (src) << 0) & 0x0000000f)) +#define CMU_REG34_VCO_CAL_VTH_HI_MAX_SET(dst, src) \ + (((dst) & ~0x00000f00) | (((u32) (src) << 8) & 0x00000f00)) +#define CMU_REG34_VCO_CAL_VTH_LO_MIN_SET(dst, src) \ + (((dst) & ~0x000000f0) | (((u32) (src) << 4) & 0x000000f0)) +#define CMU_REG34_VCO_CAL_VTH_HI_MIN_SET(dst, src) \ + (((dst) & ~0x0000f000) | (((u32) (src) << 12) & 0x0000f000)) +#define CMU_REG35 0x00046 +#define CMU_REG35_PLL_SSC_MOD_SET(dst, src) \ + (((dst) & ~0x0000fe00) | (((u32) (src) << 9) & 0x0000fe00)) +#define CMU_REG36 0x00048 +#define CMU_REG36_PLL_SSC_EN_SET(dst, src) \ + (((dst) & ~0x00000010) | (((u32) (src) << 4) & 0x00000010)) +#define CMU_REG36_PLL_SSC_VSTEP_SET(dst, src) \ + (((dst) & ~0x0000ffc0) | (((u32) (src) << 6) & 0x0000ffc0)) +#define CMU_REG36_PLL_SSC_DSMSEL_SET(dst, src) \ + (((dst) & ~0x00000020) | (((u32) (src) << 5) & 0x00000020)) +#define CMU_REG37 0x0004a +#define CMU_REG38 0x0004c +#define CMU_REG39 0x0004e + +/* PHY lane CSR accessing from SDS indirectly */ +#define RXTX_REG0 0x000 +#define RXTX_REG0_CTLE_EQ_HR_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG0_CTLE_EQ_QR_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG0_CTLE_EQ_FR_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG1 0x002 +#define RXTX_REG1_RXACVCM_SET(dst, src) \ + (((dst) & ~0x0000f000) | (((u32) (src) << 12) & 0x0000f000)) +#define RXTX_REG1_CTLE_EQ_SET(dst, src) \ + (((dst) & ~0x00000f80) | (((u32) (src) << 7) & 0x00000f80)) +#define RXTX_REG1_RXVREG1_SET(dst, src) \ + (((dst) & ~0x00000060) | (((u32) (src) << 5) & 0x00000060)) +#define RXTX_REG1_RXIREF_ADJ_SET(dst, src) \ + (((dst) & ~0x00000006) | (((u32) (src) << 1) & 0x00000006)) +#define RXTX_REG2 0x004 +#define RXTX_REG2_VTT_ENA_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG2_TX_FIFO_ENA_SET(dst, src) \ + (((dst) & ~0x00000020) | (((u32) (src) << 5) & 0x00000020)) +#define RXTX_REG2_VTT_SEL_SET(dst, src) \ + (((dst) & ~0x000000c0) | (((u32) (src) << 6) & 0x000000c0)) +#define RXTX_REG4 0x008 +#define RXTX_REG4_TX_LOOPBACK_BUF_EN_MASK 0x00000040 +#define RXTX_REG4_TX_DATA_RATE_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define RXTX_REG4_TX_WORD_MODE_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG5 0x00a +#define RXTX_REG5_TX_CN1_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG5_TX_CP1_SET(dst, src) \ + (((dst) & ~0x000007e0) | (((u32) (src) << 5) & 0x000007e0)) +#define RXTX_REG5_TX_CN2_SET(dst, src) \ + (((dst) & ~0x0000001f) | (((u32) (src) << 0) & 0x0000001f)) +#define RXTX_REG6 0x00c +#define RXTX_REG6_TXAMP_CNTL_SET(dst, src) \ + (((dst) & ~0x00000780) | (((u32) (src) << 7) & 0x00000780)) +#define RXTX_REG6_TXAMP_ENA_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define RXTX_REG6_RX_BIST_ERRCNT_RD_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define RXTX_REG6_TX_IDLE_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG6_RX_BIST_RESYNC_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG7 0x00e +#define RXTX_REG7_RESETB_RXD_MASK 0x00000100 +#define RXTX_REG7_RESETB_RXA_MASK 0x00000080 +#define RXTX_REG7_BIST_ENA_RX_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define RXTX_REG7_RX_WORD_MODE_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG8 0x010 +#define RXTX_REG8_CDR_LOOP_ENA_SET(dst, src) \ + (((dst) & ~0x00004000) | (((u32) (src) << 14) & 0x00004000)) +#define RXTX_REG8_CDR_BYPASS_RXLOS_SET(dst, src) \ + (((dst) & ~0x00000800) | (((u32) (src) << 11) & 0x00000800)) +#define RXTX_REG8_SSC_ENABLE_SET(dst, src) \ + (((dst) & ~0x00000200) | (((u32) (src) << 9) & 0x00000200)) +#define RXTX_REG8_SD_VREF_SET(dst, src) \ + (((dst) & ~0x000000f0) | (((u32) (src) << 4) & 0x000000f0)) +#define RXTX_REG8_SD_DISABLE_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG7 0x00e +#define RXTX_REG7_RESETB_RXD_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG7_RESETB_RXA_SET(dst, src) \ + (((dst) & ~0x00000080) | (((u32) (src) << 7) & 0x00000080)) +#define RXTX_REG7_LOOP_BACK_ENA_CTLE_MASK 0x00004000 +#define RXTX_REG7_LOOP_BACK_ENA_CTLE_SET(dst, src) \ + (((dst) & ~0x00004000) | (((u32) (src) << 14) & 0x00004000)) +#define RXTX_REG11 0x016 +#define RXTX_REG11_PHASE_ADJUST_LIMIT_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG12 0x018 +#define RXTX_REG12_LATCH_OFF_ENA_SET(dst, src) \ + (((dst) & ~0x00002000) | (((u32) (src) << 13) & 0x00002000)) +#define RXTX_REG12_SUMOS_ENABLE_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define RXTX_REG12_RX_DET_TERM_ENABLE_MASK 0x00000002 +#define RXTX_REG12_RX_DET_TERM_ENABLE_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG13 0x01a +#define RXTX_REG14 0x01c +#define RXTX_REG14_CLTE_LATCAL_MAN_PROG_SET(dst, src) \ + (((dst) & ~0x0000003f) | (((u32) (src) << 0) & 0x0000003f)) +#define RXTX_REG14_CTLE_LATCAL_MAN_ENA_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define RXTX_REG26 0x034 +#define RXTX_REG26_PERIOD_ERROR_LATCH_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG26_BLWC_ENA_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG21 0x02a +#define RXTX_REG21_DO_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG21_XO_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG21_LATCH_CAL_FAIL_ODD_RD(src) ((0x0000000f & (u32)(src))) +#define RXTX_REG22 0x02c +#define RXTX_REG22_SO_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG22_EO_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG22_LATCH_CAL_FAIL_EVEN_RD(src) ((0x0000000f & (u32)(src))) +#define RXTX_REG23 0x02e +#define RXTX_REG23_DE_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG23_XE_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG24 0x030 +#define RXTX_REG24_EE_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG24_SE_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG27 0x036 +#define RXTX_REG28 0x038 +#define RXTX_REG31 0x03e +#define RXTX_REG38 0x04c +#define RXTX_REG38_CUSTOMER_PINMODE_INV_SET(dst, src) \ + (((dst) & 0x0000fffe) | (((u32) (src) << 1) & 0x0000fffe)) +#define RXTX_REG39 0x04e +#define RXTX_REG40 0x050 +#define RXTX_REG41 0x052 +#define RXTX_REG42 0x054 +#define RXTX_REG43 0x056 +#define RXTX_REG44 0x058 +#define RXTX_REG45 0x05a +#define RXTX_REG46 0x05c +#define RXTX_REG47 0x05e +#define RXTX_REG48 0x060 +#define RXTX_REG49 0x062 +#define RXTX_REG50 0x064 +#define RXTX_REG51 0x066 +#define RXTX_REG52 0x068 +#define RXTX_REG53 0x06a +#define RXTX_REG54 0x06c +#define RXTX_REG55 0x06e +#define RXTX_REG61 0x07a +#define RXTX_REG61_ISCAN_INBERT_SET(dst, src) \ + (((dst) & ~0x00000010) | (((u32) (src) << 4) & 0x00000010)) +#define RXTX_REG61_LOADFREQ_SHIFT_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG61_EYE_COUNT_WIDTH_SEL_SET(dst, src) \ + (((dst) & ~0x000000c0) | (((u32) (src) << 6) & 0x000000c0)) +#define RXTX_REG61_SPD_SEL_CDR_SET(dst, src) \ + (((dst) & ~0x00003c00) | (((u32) (src) << 10) & 0x00003c00)) +#define RXTX_REG62 0x07c +#define RXTX_REG62_PERIOD_H1_QLATCH_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG81 0x0a2 +#define RXTX_REG89_MU_TH7_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG89_MU_TH8_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG89_MU_TH9_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG96 0x0c0 +#define RXTX_REG96_MU_FREQ1_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG96_MU_FREQ2_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG96_MU_FREQ3_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG99 0x0c6 +#define RXTX_REG99_MU_PHASE1_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG99_MU_PHASE2_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG99_MU_PHASE3_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG102 0x0cc +#define RXTX_REG102_FREQLOOP_LIMIT_SET(dst, src) \ + (((dst) & ~0x00000060) | (((u32) (src) << 5) & 0x00000060)) +#define RXTX_REG114 0x0e4 +#define RXTX_REG121 0x0f2 +#define RXTX_REG121_SUMOS_CAL_CODE_RD(src) ((0x0000003e & (u32)(src)) >> 0x1) +#define RXTX_REG125 0x0fa +#define RXTX_REG125_PQ_REG_SET(dst, src) \ + (((dst) & ~0x0000fe00) | (((u32) (src) << 9) & 0x0000fe00)) +#define RXTX_REG125_SIGN_PQ_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG125_SIGN_PQ_2C_SET(dst, src) \ + (((dst) & ~0x00000080) | (((u32) (src) << 7) & 0x00000080)) +#define RXTX_REG125_PHZ_MANUALCODE_SET(dst, src) \ + (((dst) & ~0x0000007c) | (((u32) (src) << 2) & 0x0000007c)) +#define RXTX_REG125_PHZ_MANUAL_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG127 0x0fe +#define RXTX_REG127_FORCE_SUM_CAL_START_MASK 0x00000002 +#define RXTX_REG127_FORCE_LAT_CAL_START_MASK 0x00000004 +#define RXTX_REG127_FORCE_SUM_CAL_START_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG127_FORCE_LAT_CAL_START_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define RXTX_REG127_LATCH_MAN_CAL_ENA_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG127_DO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG127_XO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG128 0x100 +#define RXTX_REG128_LATCH_CAL_WAIT_SEL_SET(dst, src) \ + (((dst) & ~0x0000000c) | (((u32) (src) << 2) & 0x0000000c)) +#define RXTX_REG128_EO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG128_SO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG129 0x102 +#define RXTX_REG129_DE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG129_XE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG130 0x104 +#define RXTX_REG130_EE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG130_SE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG145 0x122 +#define RXTX_REG145_TX_IDLE_SATA_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define RXTX_REG145_RXES_ENA_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG145_RXDFE_CONFIG_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define RXTX_REG145_RXVWES_LATENA_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define RXTX_REG147 0x126 +#define RXTX_REG148 0x128 + +/* Clock macro type */ +enum cmu_type_t { + REF_CMU = 0, /* Clock macro is the internal reference clock */ + PHY_CMU = 1, /* Clock macro is the PLL for the Serdes */ +}; + +enum mux_type_t { + MUX_SELECT_ATA = 0, /* Switch the MUX to ATA */ + MUX_SELECT_SGMMII = 0, /* Switch the MUX to SGMII */ +}; + +enum clk_type_t { + CLK_EXT_DIFF = 0, /* External differential */ + CLK_INT_DIFF = 1, /* Internal differential */ + CLK_INT_SING = 2, /* Internal single ended */ +}; + +enum phy_mode { + MODE_SATA = 0, /* List them for simple reference */ + MODE_SGMII = 1, + MODE_PCIE = 2, + MODE_USB = 3, + MODE_XFI = 4, + MODE_MAX +}; + +struct xgene_sata_override_param { + u32 speed[MAX_LANE]; /* Index for override parameter per lane */ + u32 txspeed[3]; /* Tx speed */ + u32 txboostgain[MAX_LANE*3]; /* Tx freq boost and gain control */ + u32 txeyetuning[MAX_LANE*3]; /* Tx eye tuning */ + u32 txeyedirection[MAX_LANE*3]; /* Tx eye tuning direction */ + u32 txamplitude[MAX_LANE*3]; /* Tx amplitude control */ + u32 txprecursor_cn1[MAX_LANE*3]; /* Tx emphasis taps 1st pre-cursor */ + u32 txprecursor_cn2[MAX_LANE*3]; /* Tx emphasis taps 2nd pre-cursor */ + u32 txpostcursor_cp1[MAX_LANE*3]; /* Tx emphasis taps post-cursor */ +}; + +struct xgene_phy_ctx { + struct device *dev; + struct phy *phy; + enum phy_mode mode; /* Mode of operation */ + enum clk_type_t clk_type; /* Input clock selection */ + void __iomem *sds_base; /* PHY CSR base addr */ + struct clk *clk; /* Optional clock */ + + /* Override Serdes parameters */ + struct xgene_sata_override_param sata_param; +}; + +/* + * For chip earlier than A3 version, enable this flag. + * To enable, pass boot argument phy_xgene.preA3Chip=1 + */ +static int preA3Chip; +MODULE_PARM_DESC(preA3Chip, "Enable pre-A3 chip support (1=enable 0=disable)"); +module_param_named(preA3Chip, preA3Chip, int, 0444); + +static void sds_wr(void __iomem *csr_base, u32 indirect_cmd_reg, + u32 indirect_data_reg, u32 addr, u32 data) +{ + unsigned long deadline = jiffies + HZ; + u32 val; + u32 cmd; + + cmd = CFG_IND_WR_CMD_MASK | CFG_IND_CMD_DONE_MASK; + cmd = CFG_IND_ADDR_SET(cmd, addr); + writel(data, csr_base + indirect_data_reg); + readl(csr_base + indirect_data_reg); /* Force a barrier */ + writel(cmd, csr_base + indirect_cmd_reg); + readl(csr_base + indirect_cmd_reg); /* Force a barrier */ + do { + val = readl(csr_base + indirect_cmd_reg); + } while (!(val & CFG_IND_CMD_DONE_MASK) && + time_before(jiffies, deadline)); + if (!(val & CFG_IND_CMD_DONE_MASK)) + pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n", + csr_base + indirect_cmd_reg, addr, data); +} + +static void sds_rd(void __iomem *csr_base, u32 indirect_cmd_reg, + u32 indirect_data_reg, u32 addr, u32 *data) +{ + unsigned long deadline = jiffies + HZ; + u32 val; + u32 cmd; + + cmd = CFG_IND_RD_CMD_MASK | CFG_IND_CMD_DONE_MASK; + cmd = CFG_IND_ADDR_SET(cmd, addr); + writel(cmd, csr_base + indirect_cmd_reg); + readl(csr_base + indirect_cmd_reg); /* Force a barrier */ + do { + val = readl(csr_base + indirect_cmd_reg); + } while (!(val & CFG_IND_CMD_DONE_MASK) && + time_before(jiffies, deadline)); + *data = readl(csr_base + indirect_data_reg); + if (!(val & CFG_IND_CMD_DONE_MASK)) + pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n", + csr_base + indirect_cmd_reg, addr, *data); +} + +static void cmu_wr(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 data) +{ + void __iomem *sds_base = ctx->sds_base; + u32 val; + + if (cmu_type == REF_CMU) + reg += SERDES_PLL_REF_INDIRECT_OFFSET; + else + reg += SERDES_PLL_INDIRECT_OFFSET; + sds_wr(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_WDATA_REG, reg, data); + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, &val); + pr_debug("CMU WR addr 0x%X value 0x%08X <-> 0x%08X\n", reg, data, val); +} + +static void cmu_rd(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 *data) +{ + void __iomem *sds_base = ctx->sds_base; + + if (cmu_type == REF_CMU) + reg += SERDES_PLL_REF_INDIRECT_OFFSET; + else + reg += SERDES_PLL_INDIRECT_OFFSET; + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, data); + pr_debug("CMU RD addr 0x%X value 0x%08X\n", reg, *data); +} + +static void cmu_toggle1to0(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 bits) +{ + u32 val; + + cmu_rd(ctx, cmu_type, reg, &val); + val |= bits; + cmu_wr(ctx, cmu_type, reg, val); + cmu_rd(ctx, cmu_type, reg, &val); + val &= ~bits; + cmu_wr(ctx, cmu_type, reg, val); +} + +static void cmu_clrbits(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 bits) +{ + u32 val; + + cmu_rd(ctx, cmu_type, reg, &val); + val &= ~bits; + cmu_wr(ctx, cmu_type, reg, val); +} + +static void cmu_setbits(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 bits) +{ + u32 val; + + cmu_rd(ctx, cmu_type, reg, &val); + val |= bits; + cmu_wr(ctx, cmu_type, reg, val); +} + +static void serdes_wr(struct xgene_phy_ctx *ctx, int lane, u32 reg, u32 data) +{ + void __iomem *sds_base = ctx->sds_base; + u32 val; + + reg += SERDES_INDIRECT_OFFSET; + reg += lane * SERDES_LANE_STRIDE; + sds_wr(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_WDATA_REG, reg, data); + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, &val); + pr_debug("SERDES WR addr 0x%X value 0x%08X <-> 0x%08X\n", reg, data, + val); +} + +static void serdes_rd(struct xgene_phy_ctx *ctx, int lane, u32 reg, u32 *data) +{ + void __iomem *sds_base = ctx->sds_base; + + reg += SERDES_INDIRECT_OFFSET; + reg += lane * SERDES_LANE_STRIDE; + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, data); + pr_debug("SERDES RD addr 0x%X value 0x%08X\n", reg, *data); +} + +static void serdes_clrbits(struct xgene_phy_ctx *ctx, int lane, u32 reg, + u32 bits) +{ + u32 val; + + serdes_rd(ctx, lane, reg, &val); + val &= ~bits; + serdes_wr(ctx, lane, reg, val); +} + +static void serdes_setbits(struct xgene_phy_ctx *ctx, int lane, u32 reg, + u32 bits) +{ + u32 val; + + serdes_rd(ctx, lane, reg, &val); + val |= bits; + serdes_wr(ctx, lane, reg, val); +} + +static void xgene_phy_cfg_cmu_clk_type(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + u32 val; + + /* Set the reset sequence delay for TX ready assertion */ + cmu_rd(ctx, cmu_type, CMU_REG12, &val); + val = CMU_REG12_STATE_DELAY9_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG12, val); + /* Set the programmable stage delays between various enable stages */ + cmu_wr(ctx, cmu_type, CMU_REG13, 0x0222); + cmu_wr(ctx, cmu_type, CMU_REG14, 0x2225); + + /* Configure clock type */ + if (clk_type == CLK_EXT_DIFF) { + /* Select external clock mux */ + cmu_rd(ctx, cmu_type, CMU_REG0, &val); + val = CMU_REG0_PLL_REF_SEL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG0, val); + /* Select CMOS as reference clock */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + dev_dbg(ctx->dev, "Set external reference clock\n"); + } else if (clk_type == CLK_INT_DIFF) { + /* Select internal clock mux */ + cmu_rd(ctx, cmu_type, CMU_REG0, &val); + val = CMU_REG0_PLL_REF_SEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG0, val); + /* Select CMOS as reference clock */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + dev_dbg(ctx->dev, "Set internal reference clock\n"); + } else if (clk_type == CLK_INT_SING) { + /* + * NOTE: This clock type is NOT support for controller + * whose internal clock shared in the PCIe controller + * + * Select internal clock mux + */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + /* Select CML as reference clock */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + dev_dbg(ctx->dev, + "Set internal single ended reference clock\n"); + } +} + +static void xgene_phy_sata_cfg_cmu_core(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + u32 val; + int ref_100MHz; + + if (cmu_type == REF_CMU) { + /* Set VCO calibration voltage threshold */ + cmu_rd(ctx, cmu_type, CMU_REG34, &val); + val = CMU_REG34_VCO_CAL_VTH_LO_MAX_SET(val, 0x7); + val = CMU_REG34_VCO_CAL_VTH_HI_MAX_SET(val, 0xc); + val = CMU_REG34_VCO_CAL_VTH_LO_MIN_SET(val, 0x3); + val = CMU_REG34_VCO_CAL_VTH_HI_MIN_SET(val, 0x8); + cmu_wr(ctx, cmu_type, CMU_REG34, val); + } + + /* Set the VCO calibration counter */ + cmu_rd(ctx, cmu_type, CMU_REG0, &val); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG0_CAL_COUNT_RESOL_SET(val, 0x4); + else + val = CMU_REG0_CAL_COUNT_RESOL_SET(val, 0x7); + cmu_wr(ctx, cmu_type, CMU_REG0, val); + + /* Configure PLL for calibration */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_PLL_CP_SET(val, 0x1); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG1_PLL_CP_SEL_SET(val, 0x5); + else + val = CMU_REG1_PLL_CP_SEL_SET(val, 0x3); + if (cmu_type == REF_CMU) + val = CMU_REG1_PLL_MANUALCAL_SET(val, 0x0); + else + val = CMU_REG1_PLL_MANUALCAL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + + if (cmu_type != REF_CMU) + cmu_clrbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + + /* Configure the PLL for either 100MHz or 50MHz */ + cmu_rd(ctx, cmu_type, CMU_REG2, &val); + if (cmu_type == REF_CMU) { + val = CMU_REG2_PLL_LFRES_SET(val, 0xa); + ref_100MHz = 1; + } else { + val = CMU_REG2_PLL_LFRES_SET(val, 0x3); + if (clk_type == CLK_EXT_DIFF) + ref_100MHz = 0; + else + ref_100MHz = 1; + } + if (ref_100MHz) { + val = CMU_REG2_PLL_FBDIV_SET(val, FBDIV_VAL_100M); + val = CMU_REG2_PLL_REFDIV_SET(val, REFDIV_VAL_100M); + } else { + val = CMU_REG2_PLL_FBDIV_SET(val, FBDIV_VAL_50M); + val = CMU_REG2_PLL_REFDIV_SET(val, REFDIV_VAL_50M); + } + cmu_wr(ctx, cmu_type, CMU_REG2, val); + + /* Configure the VCO */ + cmu_rd(ctx, cmu_type, CMU_REG3, &val); + if (cmu_type == REF_CMU) { + val = CMU_REG3_VCOVARSEL_SET(val, 0x3); + val = CMU_REG3_VCO_MOMSEL_INIT_SET(val, 0x10); + } else { + val = CMU_REG3_VCOVARSEL_SET(val, 0xF); + if (preA3Chip) + val = CMU_REG3_VCO_MOMSEL_INIT_SET(val, 0x15); + else + val = CMU_REG3_VCO_MOMSEL_INIT_SET(val, 0x1a); + val = CMU_REG3_VCO_MANMOMSEL_SET(val, 0x15); + } + cmu_wr(ctx, cmu_type, CMU_REG3, val); + + /* Disable force PLL lock */ + cmu_rd(ctx, cmu_type, CMU_REG26, &val); + val = CMU_REG26_FORCE_PLL_LOCK_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG26, val); + + /* Setup PLL loop filter */ + cmu_rd(ctx, cmu_type, CMU_REG5, &val); + val = CMU_REG5_PLL_LFSMCAP_SET(val, 0x3); + val = CMU_REG5_PLL_LFCAP_SET(val, 0x3); + if (cmu_type == REF_CMU || !preA3Chip) + val = CMU_REG5_PLL_LOCK_RESOLUTION_SET(val, 0x7); + else + val = CMU_REG5_PLL_LOCK_RESOLUTION_SET(val, 0x4); + cmu_wr(ctx, cmu_type, CMU_REG5, val); + + /* Enable or disable manual calibration */ + cmu_rd(ctx, cmu_type, CMU_REG6, &val); + val = CMU_REG6_PLL_VREGTRIM_SET(val, preA3Chip ? 0x0 : 0x2); + val = CMU_REG6_MAN_PVT_CAL_SET(val, preA3Chip ? 0x1 : 0x0); + cmu_wr(ctx, cmu_type, CMU_REG6, val); + + /* Configure lane for 20-bits */ + if (cmu_type == PHY_CMU) { + cmu_rd(ctx, cmu_type, CMU_REG9, &val); + val = CMU_REG9_TX_WORD_MODE_CH1_SET(val, + CMU_REG9_WORD_LEN_20BIT); + val = CMU_REG9_TX_WORD_MODE_CH0_SET(val, + CMU_REG9_WORD_LEN_20BIT); + val = CMU_REG9_PLL_POST_DIVBY2_SET(val, 0x1); + if (!preA3Chip) { + val = CMU_REG9_VBG_BYPASSB_SET(val, 0x0); + val = CMU_REG9_IGEN_BYPASS_SET(val , 0x0); + } + cmu_wr(ctx, cmu_type, CMU_REG9, val); + + if (!preA3Chip) { + cmu_rd(ctx, cmu_type, CMU_REG10, &val); + val = CMU_REG10_VREG_REFSEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG10, val); + } + } + + cmu_rd(ctx, cmu_type, CMU_REG16, &val); + val = CMU_REG16_CALIBRATION_DONE_OVERRIDE_SET(val, 0x1); + val = CMU_REG16_BYPASS_PLL_LOCK_SET(val, 0x1); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(val, 0x4); + else + val = CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(val, 0x7); + cmu_wr(ctx, cmu_type, CMU_REG16, val); + + /* Configure for SATA */ + cmu_rd(ctx, cmu_type, CMU_REG30, &val); + val = CMU_REG30_PCIE_MODE_SET(val, 0x0); + val = CMU_REG30_LOCK_COUNT_SET(val, 0x3); + cmu_wr(ctx, cmu_type, CMU_REG30, val); + + /* Disable state machine bypass */ + cmu_wr(ctx, cmu_type, CMU_REG31, 0xF); + + cmu_rd(ctx, cmu_type, CMU_REG32, &val); + val = CMU_REG32_PVT_CAL_WAIT_SEL_SET(val, 0x3); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG32_IREF_ADJ_SET(val, 0x3); + else + val = CMU_REG32_IREF_ADJ_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG32, val); + + /* Set VCO calibration threshold */ + if (cmu_type != REF_CMU && preA3Chip) + cmu_wr(ctx, cmu_type, CMU_REG34, 0x8d27); + else + cmu_wr(ctx, cmu_type, CMU_REG34, 0x873c); + + /* Set CTLE Override and override waiting from state machine */ + cmu_wr(ctx, cmu_type, CMU_REG37, 0xF00F); +} + +static void xgene_phy_ssc_enable(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type) +{ + u32 val; + + /* Set SSC modulation value */ + cmu_rd(ctx, cmu_type, CMU_REG35, &val); + val = CMU_REG35_PLL_SSC_MOD_SET(val, 98); + cmu_wr(ctx, cmu_type, CMU_REG35, val); + + /* Enable SSC, set vertical step and DSM value */ + cmu_rd(ctx, cmu_type, CMU_REG36, &val); + val = CMU_REG36_PLL_SSC_VSTEP_SET(val, 30); + val = CMU_REG36_PLL_SSC_EN_SET(val, 1); + val = CMU_REG36_PLL_SSC_DSMSEL_SET(val, 1); + cmu_wr(ctx, cmu_type, CMU_REG36, val); + + /* Reset the PLL */ + cmu_clrbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + cmu_setbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + + /* Force VCO calibration to restart */ + cmu_toggle1to0(ctx, cmu_type, CMU_REG32, + CMU_REG32_FORCE_VCOCAL_START_MASK); +} + +static void xgene_phy_sata_cfg_lanes(struct xgene_phy_ctx *ctx) +{ + u32 val; + u32 reg; + int i; + int lane; + + for (lane = 0; lane < MAX_LANE; lane++) { + serdes_wr(ctx, lane, RXTX_REG147, 0x6); + + /* Set boost control for quarter, half, and full rate */ + serdes_rd(ctx, lane, RXTX_REG0, &val); + val = RXTX_REG0_CTLE_EQ_HR_SET(val, 0x10); + val = RXTX_REG0_CTLE_EQ_QR_SET(val, 0x10); + val = RXTX_REG0_CTLE_EQ_FR_SET(val, 0x10); + serdes_wr(ctx, lane, RXTX_REG0, val); + + /* Set boost control value */ + serdes_rd(ctx, lane, RXTX_REG1, &val); + val = RXTX_REG1_RXACVCM_SET(val, 0x7); + val = RXTX_REG1_CTLE_EQ_SET(val, + ctx->sata_param.txboostgain[lane * 3 + + ctx->sata_param.speed[lane]]); + serdes_wr(ctx, lane, RXTX_REG1, val); + + /* Latch VTT value based on the termination to ground and + enable TX FIFO */ + serdes_rd(ctx, lane, RXTX_REG2, &val); + val = RXTX_REG2_VTT_ENA_SET(val, 0x1); + val = RXTX_REG2_VTT_SEL_SET(val, 0x1); + val = RXTX_REG2_TX_FIFO_ENA_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG2, val); + + /* Configure Tx for 20-bits */ + serdes_rd(ctx, lane, RXTX_REG4, &val); + val = RXTX_REG4_TX_WORD_MODE_SET(val, CMU_REG9_WORD_LEN_20BIT); + serdes_wr(ctx, lane, RXTX_REG4, val); + + if (!preA3Chip) { + serdes_rd(ctx, lane, RXTX_REG1, &val); + val = RXTX_REG1_RXVREG1_SET(val, 0x2); + val = RXTX_REG1_RXIREF_ADJ_SET(val, 0x2); + serdes_wr(ctx, lane, RXTX_REG1, val); + } + + /* Set pre-emphasis first 1 and 2, and post-emphasis values */ + serdes_rd(ctx, lane, RXTX_REG5, &val); + val = RXTX_REG5_TX_CN1_SET(val, + ctx->sata_param.txprecursor_cn1[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG5_TX_CP1_SET(val, + ctx->sata_param.txpostcursor_cp1[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG5_TX_CN2_SET(val, + ctx->sata_param.txprecursor_cn2[lane * 3 + + ctx->sata_param.speed[lane]]); + serdes_wr(ctx, lane, RXTX_REG5, val); + + /* Set TX amplitude value */ + serdes_rd(ctx, lane, RXTX_REG6, &val); + val = RXTX_REG6_TXAMP_CNTL_SET(val, + ctx->sata_param.txamplitude[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG6_TXAMP_ENA_SET(val, 0x1); + val = RXTX_REG6_TX_IDLE_SET(val, 0x0); + val = RXTX_REG6_RX_BIST_RESYNC_SET(val, 0x0); + val = RXTX_REG6_RX_BIST_ERRCNT_RD_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG6, val); + + /* Configure Rx for 20-bits */ + serdes_rd(ctx, lane, RXTX_REG7, &val); + val = RXTX_REG7_BIST_ENA_RX_SET(val, 0x0); + val = RXTX_REG7_RX_WORD_MODE_SET(val, CMU_REG9_WORD_LEN_20BIT); + serdes_wr(ctx, lane, RXTX_REG7, val); + + /* Set CDR and LOS values and enable Rx SSC */ + serdes_rd(ctx, lane, RXTX_REG8, &val); + val = RXTX_REG8_CDR_LOOP_ENA_SET(val, 0x1); + val = RXTX_REG8_CDR_BYPASS_RXLOS_SET(val, 0x0); + val = RXTX_REG8_SSC_ENABLE_SET(val, 0x1); + val = RXTX_REG8_SD_DISABLE_SET(val, 0x0); + val = RXTX_REG8_SD_VREF_SET(val, 0x4); + serdes_wr(ctx, lane, RXTX_REG8, val); + + /* Set phase adjust upper/lower limits */ + serdes_rd(ctx, lane, RXTX_REG11, &val); + val = RXTX_REG11_PHASE_ADJUST_LIMIT_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG11, val); + + /* Enable Latch Off; disable SUMOS and Tx termination */ + serdes_rd(ctx, lane, RXTX_REG12, &val); + val = RXTX_REG12_LATCH_OFF_ENA_SET(val, 0x1); + val = RXTX_REG12_SUMOS_ENABLE_SET(val, 0x0); + val = RXTX_REG12_RX_DET_TERM_ENABLE_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG12, val); + + /* Set period error latch to 512T and enable BWL */ + serdes_rd(ctx, lane, RXTX_REG26, &val); + val = RXTX_REG26_PERIOD_ERROR_LATCH_SET(val, 0x0); + val = RXTX_REG26_BLWC_ENA_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG26, val); + + serdes_wr(ctx, lane, RXTX_REG28, 0x0); + + /* Set DFE loop preset value */ + serdes_wr(ctx, lane, RXTX_REG31, 0x0); + + /* Set Eye Monitor counter width to 12-bit */ + serdes_rd(ctx, lane, RXTX_REG61, &val); + val = RXTX_REG61_ISCAN_INBERT_SET(val, 0x1); + val = RXTX_REG61_LOADFREQ_SHIFT_SET(val, 0x0); + val = RXTX_REG61_EYE_COUNT_WIDTH_SEL_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG61, val); + + serdes_rd(ctx, lane, RXTX_REG62, &val); + val = RXTX_REG62_PERIOD_H1_QLATCH_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG62, val); + + /* Set BW select tap X for DFE loop */ + for (i = 0; i < 9; i++) { + reg = RXTX_REG81 + i * 2; + serdes_rd(ctx, lane, reg, &val); + val = RXTX_REG89_MU_TH7_SET(val, 0xe); + val = RXTX_REG89_MU_TH8_SET(val, 0xe); + val = RXTX_REG89_MU_TH9_SET(val, 0xe); + serdes_wr(ctx, lane, reg, val); + } + + /* Set BW select tap X for frequency adjust loop */ + for (i = 0; i < 3; i++) { + reg = RXTX_REG96 + i * 2; + serdes_rd(ctx, lane, reg, &val); + val = RXTX_REG96_MU_FREQ1_SET(val, 0x10); + val = RXTX_REG96_MU_FREQ2_SET(val, 0x10); + val = RXTX_REG96_MU_FREQ3_SET(val, 0x10); + serdes_wr(ctx, lane, reg, val); + } + + /* Set BW select tap X for phase adjust loop */ + for (i = 0; i < 3; i++) { + reg = RXTX_REG99 + i * 2; + serdes_rd(ctx, lane, reg, &val); + val = RXTX_REG99_MU_PHASE1_SET(val, 0x7); + val = RXTX_REG99_MU_PHASE2_SET(val, 0x7); + val = RXTX_REG99_MU_PHASE3_SET(val, 0x7); + serdes_wr(ctx, lane, reg, val); + } + + serdes_rd(ctx, lane, RXTX_REG102, &val); + val = RXTX_REG102_FREQLOOP_LIMIT_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG102, val); + + serdes_wr(ctx, lane, RXTX_REG114, 0xffe0); + + serdes_rd(ctx, lane, RXTX_REG125, &val); + val = RXTX_REG125_SIGN_PQ_SET(val, + ctx->sata_param.txeyedirection[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG125_PQ_REG_SET(val, + ctx->sata_param.txeyetuning[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG125_PHZ_MANUAL_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG125, val); + + serdes_rd(ctx, lane, RXTX_REG127, &val); + val = RXTX_REG127_LATCH_MAN_CAL_ENA_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG127, val); + + serdes_rd(ctx, lane, RXTX_REG128, &val); + val = RXTX_REG128_LATCH_CAL_WAIT_SEL_SET(val, 0x3); + serdes_wr(ctx, lane, RXTX_REG128, val); + + serdes_rd(ctx, lane, RXTX_REG145, &val); + val = RXTX_REG145_RXDFE_CONFIG_SET(val, 0x3); + val = RXTX_REG145_TX_IDLE_SATA_SET(val, 0x0); + if (preA3Chip) { + val = RXTX_REG145_RXES_ENA_SET(val, 0x1); + val = RXTX_REG145_RXVWES_LATENA_SET(val, 0x1); + } else { + val = RXTX_REG145_RXES_ENA_SET(val, 0x0); + val = RXTX_REG145_RXVWES_LATENA_SET(val, 0x0); + } + serdes_wr(ctx, lane, RXTX_REG145, val); + + /* + * Set Rx LOS filter clock rate, sample rate, and threshold + * windows + */ + for (i = 0; i < 4; i++) { + reg = RXTX_REG148 + i * 2; + serdes_wr(ctx, lane, reg, 0xFFFF); + } + } +} + +static int xgene_phy_cal_rdy_chk(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + void __iomem *csr_serdes = ctx->sds_base; + int loop; + u32 val; + + /* Release PHY main reset */ + writel(0xdf, csr_serdes + SATA_ENET_SDS_RST_CTL); + readl(csr_serdes + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + + if (cmu_type != REF_CMU) { + cmu_setbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + /* + * As per PHY design spec, the PLL reset requires a minimum + * of 800us. + */ + usleep_range(800, 1000); + + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_PLL_MANUALCAL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + /* + * As per PHY design spec, the PLL auto calibration requires + * a minimum of 800us. + */ + usleep_range(800, 1000); + + cmu_toggle1to0(ctx, cmu_type, CMU_REG32, + CMU_REG32_FORCE_VCOCAL_START_MASK); + /* + * As per PHY design spec, the PLL requires a minimum of + * 800us to settle. + */ + usleep_range(800, 1000); + } + + if (!preA3Chip) + goto skip_manual_cal; + + /* + * Configure the termination resister calibration + * The serial receive pins, RXP/RXN, have TERMination resistor + * that is required to be calibrated. + */ + cmu_rd(ctx, cmu_type, CMU_REG17, &val); + val = CMU_REG17_PVT_CODE_R2A_SET(val, 0x12); + val = CMU_REG17_RESERVED_7_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG17, val); + cmu_toggle1to0(ctx, cmu_type, CMU_REG17, + CMU_REG17_PVT_TERM_MAN_ENA_MASK); + /* + * The serial transmit pins, TXP/TXN, have Pull-UP and Pull-DOWN + * resistors that are required to the calibrated. + * Configure the pull DOWN calibration + */ + cmu_rd(ctx, cmu_type, CMU_REG17, &val); + val = CMU_REG17_PVT_CODE_R2A_SET(val, 0x29); + val = CMU_REG17_RESERVED_7_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG17, val); + cmu_toggle1to0(ctx, cmu_type, CMU_REG16, + CMU_REG16_PVT_DN_MAN_ENA_MASK); + /* Configure the pull UP calibration */ + cmu_rd(ctx, cmu_type, CMU_REG17, &val); + val = CMU_REG17_PVT_CODE_R2A_SET(val, 0x28); + val = CMU_REG17_RESERVED_7_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG17, val); + cmu_toggle1to0(ctx, cmu_type, CMU_REG16, + CMU_REG16_PVT_UP_MAN_ENA_MASK); + +skip_manual_cal: + /* Poll the PLL calibration completion status for at least 1 ms */ + loop = 100; + do { + cmu_rd(ctx, cmu_type, CMU_REG7, &val); + if (CMU_REG7_PLL_CALIB_DONE_RD(val)) + break; + /* + * As per PHY design spec, PLL calibration status requires + * a minimum of 10us to be updated. + */ + usleep_range(10, 100); + } while (--loop > 0); + + cmu_rd(ctx, cmu_type, CMU_REG7, &val); + dev_dbg(ctx->dev, "PLL calibration %s\n", + CMU_REG7_PLL_CALIB_DONE_RD(val) ? "done" : "failed"); + if (CMU_REG7_VCO_CAL_FAIL_RD(val)) { + dev_err(ctx->dev, + "PLL calibration failed due to VCO failure\n"); + return -1; + } + dev_dbg(ctx->dev, "PLL calibration successful\n"); + + cmu_rd(ctx, cmu_type, CMU_REG15, &val); + dev_dbg(ctx->dev, "PHY Tx is %sready\n", val & 0x300 ? "" : "not "); + return 0; +} + +static void xgene_phy_pdwn_force_vco(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + u32 val; + + dev_dbg(ctx->dev, "Reset VCO and re-start again\n"); + if (cmu_type == PHY_CMU) { + cmu_rd(ctx, cmu_type, CMU_REG16, &val); + val = CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(val, 0x7); + cmu_wr(ctx, cmu_type, CMU_REG16, val); + } + + cmu_toggle1to0(ctx, cmu_type, CMU_REG0, CMU_REG0_PDOWN_MASK); + cmu_toggle1to0(ctx, cmu_type, CMU_REG32, + CMU_REG32_FORCE_VCOCAL_START_MASK); +} + +static int xgene_phy_hw_init_sata(struct xgene_phy_ctx *ctx, + enum clk_type_t clk_type, int ssc_enable) +{ + void __iomem *sds_base = ctx->sds_base; + u32 val; + int i; + + /* Configure the PHY for operation */ + dev_dbg(ctx->dev, "Reset PHY\n"); + /* Place PHY into reset */ + writel(0x0, sds_base + SATA_ENET_SDS_RST_CTL); + val = readl(sds_base + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + /* Release PHY lane from reset (active high) */ + writel(0x20, sds_base + SATA_ENET_SDS_RST_CTL); + readl(sds_base + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + /* Release all PHY module out of reset except PHY main reset */ + writel(0xde, sds_base + SATA_ENET_SDS_RST_CTL); + readl(sds_base + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + + /* Set the operation speed */ + val = readl(sds_base + SATA_ENET_SDS_CTL1); + val = CFG_I_SPD_SEL_CDR_OVR1_SET(val, + ctx->sata_param.txspeed[ctx->sata_param.speed[0]]); + writel(val, sds_base + SATA_ENET_SDS_CTL1); + + dev_dbg(ctx->dev, "Set the customer pin mode to SATA\n"); + val = readl(sds_base + SATA_ENET_SDS_CTL0); + val = REGSPEC_CFG_I_CUSTOMER_PIN_MODE0_SET(val, 0x4421); + writel(val, sds_base + SATA_ENET_SDS_CTL0); + + /* Configure the clock macro unit (CMU) clock type */ + xgene_phy_cfg_cmu_clk_type(ctx, PHY_CMU, clk_type); + + /* Configure the clock macro */ + xgene_phy_sata_cfg_cmu_core(ctx, PHY_CMU, clk_type); + + /* Enable SSC if enabled */ + if (ssc_enable) + xgene_phy_ssc_enable(ctx, PHY_CMU); + + /* Configure PHY lanes */ + xgene_phy_sata_cfg_lanes(ctx); + + /* Set Rx/Tx 20-bit */ + val = readl(sds_base + SATA_ENET_SDS_PCS_CTL0); + val = REGSPEC_CFG_I_RX_WORDMODE0_SET(val, 0x3); + val = REGSPEC_CFG_I_TX_WORDMODE0_SET(val, 0x3); + writel(val, sds_base + SATA_ENET_SDS_PCS_CTL0); + + /* Start PLL calibration and try for three times */ + i = 10; + do { + if (!xgene_phy_cal_rdy_chk(ctx, PHY_CMU, clk_type)) + break; + /* If failed, toggle the VCO power signal and start again */ + xgene_phy_pdwn_force_vco(ctx, PHY_CMU, clk_type); + } while (--i > 0); + /* Even on failure, allow to continue any way */ + if (i <= 0) + dev_err(ctx->dev, "PLL calibration failed\n"); + + return 0; +} + +static int xgene_phy_hw_initialize(struct xgene_phy_ctx *ctx, + enum clk_type_t clk_type, + int ssc_enable) +{ + int rc; + + dev_dbg(ctx->dev, "PHY init clk type %d\n", clk_type); + + if (ctx->mode == MODE_SATA) { + rc = xgene_phy_hw_init_sata(ctx, clk_type, ssc_enable); + if (rc) + return rc; + } else { + dev_err(ctx->dev, "Un-supported customer pin mode %d\n", + ctx->mode); + return -ENODEV; + } + + return 0; +} + +/* + * Receiver Offset Calibration: + * + * Calibrate the receiver signal path offset in two steps - summar and + * latch calibrations + */ +static void xgene_phy_force_lat_summer_cal(struct xgene_phy_ctx *ctx, int lane) +{ + int i; + struct { + u32 reg; + u32 val; + } serdes_reg[] = { + {RXTX_REG38, 0x0}, + {RXTX_REG39, 0xff00}, + {RXTX_REG40, 0xffff}, + {RXTX_REG41, 0xffff}, + {RXTX_REG42, 0xffff}, + {RXTX_REG43, 0xffff}, + {RXTX_REG44, 0xffff}, + {RXTX_REG45, 0xffff}, + {RXTX_REG46, 0xffff}, + {RXTX_REG47, 0xfffc}, + {RXTX_REG48, 0x0}, + {RXTX_REG49, 0x0}, + {RXTX_REG50, 0x0}, + {RXTX_REG51, 0x0}, + {RXTX_REG52, 0x0}, + {RXTX_REG53, 0x0}, + {RXTX_REG54, 0x0}, + {RXTX_REG55, 0x0}, + }; + + /* Start SUMMER calibration */ + serdes_setbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_SUM_CAL_START_MASK); + /* + * As per PHY design spec, the Summer calibration requires a minimum + * of 100us to complete. + */ + usleep_range(100, 500); + serdes_clrbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_SUM_CAL_START_MASK); + /* + * As per PHY design spec, the auto calibration requires a minimum + * of 100us to complete. + */ + usleep_range(100, 500); + + /* Start latch calibration */ + serdes_setbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_LAT_CAL_START_MASK); + /* + * As per PHY design spec, the latch calibration requires a minimum + * of 100us to complete. + */ + usleep_range(100, 500); + serdes_clrbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_LAT_CAL_START_MASK); + + /* Configure the PHY lane for calibration */ + serdes_wr(ctx, lane, RXTX_REG28, 0x7); + serdes_wr(ctx, lane, RXTX_REG31, 0x7e00); + serdes_clrbits(ctx, lane, RXTX_REG4, + RXTX_REG4_TX_LOOPBACK_BUF_EN_MASK); + serdes_clrbits(ctx, lane, RXTX_REG7, + RXTX_REG7_LOOP_BACK_ENA_CTLE_MASK); + for (i = 0; i < ARRAY_SIZE(serdes_reg); i++) + serdes_wr(ctx, lane, serdes_reg[i].reg, + serdes_reg[i].val); +} + +static void xgene_phy_reset_rxd(struct xgene_phy_ctx *ctx, int lane) +{ + /* Reset digital Rx */ + serdes_clrbits(ctx, lane, RXTX_REG7, RXTX_REG7_RESETB_RXD_MASK); + /* As per PHY design spec, the reset requires a minimum of 100us. */ + usleep_range(100, 150); + serdes_setbits(ctx, lane, RXTX_REG7, RXTX_REG7_RESETB_RXD_MASK); +} + +static int xgene_phy_get_avg(int accum, int samples) +{ + return (accum + (samples / 2)) / samples; +} + +static void xgene_phy_gen_avg_val(struct xgene_phy_ctx *ctx, int lane) +{ + int max_loop = 10; + int avg_loop = 0; + int lat_do = 0, lat_xo = 0, lat_eo = 0, lat_so = 0; + int lat_de = 0, lat_xe = 0, lat_ee = 0, lat_se = 0; + int sum_cal = 0; + int lat_do_itr, lat_xo_itr, lat_eo_itr, lat_so_itr; + int lat_de_itr, lat_xe_itr, lat_ee_itr, lat_se_itr; + int sum_cal_itr; + int fail_even; + int fail_odd; + u32 val; + + dev_dbg(ctx->dev, "Generating avg calibration value for lane %d\n", + lane); + + /* Enable RX Hi-Z termination */ + serdes_setbits(ctx, lane, RXTX_REG12, + RXTX_REG12_RX_DET_TERM_ENABLE_MASK); + /* Turn off DFE */ + serdes_wr(ctx, lane, RXTX_REG28, 0x0000); + /* DFE Presets to zero */ + serdes_wr(ctx, lane, RXTX_REG31, 0x0000); + + /* + * Receiver Offset Calibration: + * Calibrate the receiver signal path offset in two steps - summar + * and latch calibration. + * Runs the "Receiver Offset Calibration multiple times to determine + * the average value to use. + */ + while (avg_loop < max_loop) { + /* Start the calibration */ + xgene_phy_force_lat_summer_cal(ctx, lane); + + serdes_rd(ctx, lane, RXTX_REG21, &val); + lat_do_itr = RXTX_REG21_DO_LATCH_CALOUT_RD(val); + lat_xo_itr = RXTX_REG21_XO_LATCH_CALOUT_RD(val); + fail_odd = RXTX_REG21_LATCH_CAL_FAIL_ODD_RD(val); + + serdes_rd(ctx, lane, RXTX_REG22, &val); + lat_eo_itr = RXTX_REG22_EO_LATCH_CALOUT_RD(val); + lat_so_itr = RXTX_REG22_SO_LATCH_CALOUT_RD(val); + fail_even = RXTX_REG22_LATCH_CAL_FAIL_EVEN_RD(val); + + serdes_rd(ctx, lane, RXTX_REG23, &val); + lat_de_itr = RXTX_REG23_DE_LATCH_CALOUT_RD(val); + lat_xe_itr = RXTX_REG23_XE_LATCH_CALOUT_RD(val); + + serdes_rd(ctx, lane, RXTX_REG24, &val); + lat_ee_itr = RXTX_REG24_EE_LATCH_CALOUT_RD(val); + lat_se_itr = RXTX_REG24_SE_LATCH_CALOUT_RD(val); + + serdes_rd(ctx, lane, RXTX_REG121, &val); + sum_cal_itr = RXTX_REG121_SUMOS_CAL_CODE_RD(val); + + /* Check for failure. If passed, sum them for averaging */ + if ((fail_even == 0 || fail_even == 1) && + (fail_odd == 0 || fail_odd == 1)) { + lat_do += lat_do_itr; + lat_xo += lat_xo_itr; + lat_eo += lat_eo_itr; + lat_so += lat_so_itr; + lat_de += lat_de_itr; + lat_xe += lat_xe_itr; + lat_ee += lat_ee_itr; + lat_se += lat_se_itr; + sum_cal += sum_cal_itr; + + dev_dbg(ctx->dev, "Iteration %d:\n", avg_loop); + dev_dbg(ctx->dev, "DO 0x%x XO 0x%x EO 0x%x SO 0x%x\n", + lat_do_itr, lat_xo_itr, lat_eo_itr, + lat_so_itr); + dev_dbg(ctx->dev, "DE 0x%x XE 0x%x EE 0x%x SE 0x%x\n", + lat_de_itr, lat_xe_itr, lat_ee_itr, + lat_se_itr); + dev_dbg(ctx->dev, "SUM 0x%x\n", sum_cal_itr); + ++avg_loop; + } else { + dev_err(ctx->dev, + "Receiver calibration failed at %d loop\n", + avg_loop); + } + xgene_phy_reset_rxd(ctx, lane); + } + + /* Update latch manual calibration with average value */ + serdes_rd(ctx, lane, RXTX_REG127, &val); + val = RXTX_REG127_DO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_do, max_loop)); + val = RXTX_REG127_XO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_xo, max_loop)); + serdes_wr(ctx, lane, RXTX_REG127, val); + + serdes_rd(ctx, lane, RXTX_REG128, &val); + val = RXTX_REG128_EO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_eo, max_loop)); + val = RXTX_REG128_SO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_so, max_loop)); + serdes_wr(ctx, lane, RXTX_REG128, val); + + serdes_rd(ctx, lane, RXTX_REG129, &val); + val = RXTX_REG129_DE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_de, max_loop)); + val = RXTX_REG129_XE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_xe, max_loop)); + serdes_wr(ctx, lane, RXTX_REG129, val); + + serdes_rd(ctx, lane, RXTX_REG130, &val); + val = RXTX_REG130_EE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_ee, max_loop)); + val = RXTX_REG130_SE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_se, max_loop)); + serdes_wr(ctx, lane, RXTX_REG130, val); + + /* Update SUMMER calibration with average value */ + serdes_rd(ctx, lane, RXTX_REG14, &val); + val = RXTX_REG14_CLTE_LATCAL_MAN_PROG_SET(val, + xgene_phy_get_avg(sum_cal, max_loop)); + serdes_wr(ctx, lane, RXTX_REG14, val); + + dev_dbg(ctx->dev, "Average Value:\n"); + dev_dbg(ctx->dev, "DO 0x%x XO 0x%x EO 0x%x SO 0x%x\n", + xgene_phy_get_avg(lat_do, max_loop), + xgene_phy_get_avg(lat_xo, max_loop), + xgene_phy_get_avg(lat_eo, max_loop), + xgene_phy_get_avg(lat_so, max_loop)); + dev_dbg(ctx->dev, "DE 0x%x XE 0x%x EE 0x%x SE 0x%x\n", + xgene_phy_get_avg(lat_de, max_loop), + xgene_phy_get_avg(lat_xe, max_loop), + xgene_phy_get_avg(lat_ee, max_loop), + xgene_phy_get_avg(lat_se, max_loop)); + dev_dbg(ctx->dev, "SUM 0x%x\n", + xgene_phy_get_avg(sum_cal, max_loop)); + + serdes_rd(ctx, lane, RXTX_REG14, &val); + val = RXTX_REG14_CTLE_LATCAL_MAN_ENA_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG14, val); + dev_dbg(ctx->dev, "Enable Manual Summer calibration\n"); + + serdes_rd(ctx, lane, RXTX_REG127, &val); + val = RXTX_REG127_LATCH_MAN_CAL_ENA_SET(val, 0x1); + dev_dbg(ctx->dev, "Enable Manual Latch calibration\n"); + serdes_wr(ctx, lane, RXTX_REG127, val); + + /* Disable RX Hi-Z termination */ + serdes_rd(ctx, lane, RXTX_REG12, &val); + val = RXTX_REG12_RX_DET_TERM_ENABLE_SET(val, 0); + serdes_wr(ctx, lane, RXTX_REG12, val); + /* Turn on DFE */ + serdes_wr(ctx, lane, RXTX_REG28, 0x0007); + /* Set DFE preset */ + serdes_wr(ctx, lane, RXTX_REG31, 0x7e00); +} + +static int xgene_phy_hw_init(struct phy *phy) +{ + struct xgene_phy_ctx *ctx = phy_get_drvdata(phy); + int rc; + int i; + + rc = xgene_phy_hw_initialize(ctx, CLK_EXT_DIFF, SSC_DISABLE); + if (rc) { + dev_err(ctx->dev, "PHY initialize failed %d\n", rc); + return rc; + } + + /* Setup clock properly after PHY configuration */ + if (!IS_ERR(ctx->clk)) { + /* HW requires an toggle of the clock */ + clk_prepare_enable(ctx->clk); + clk_disable_unprepare(ctx->clk); + clk_prepare_enable(ctx->clk); + } + + /* Compute average value */ + for (i = 0; i < MAX_LANE; i++) + xgene_phy_gen_avg_val(ctx, i); + + dev_dbg(ctx->dev, "PHY initialized\n"); + return 0; +} + +static const struct phy_ops xgene_phy_ops = { + .init = xgene_phy_hw_init, + .owner = THIS_MODULE, +}; + +static struct phy *xgene_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct xgene_phy_ctx *ctx = dev_get_drvdata(dev); + + if (args->args_count <= 0) + return ERR_PTR(-EINVAL); + if (args->args[0] < MODE_SATA || args->args[0] >= MODE_MAX) + return ERR_PTR(-EINVAL); + + ctx->mode = args->args[0]; + return ctx->phy; +} + +static void xgene_phy_get_param(struct platform_device *pdev, + const char *name, u32 *buffer, + int count, u32 *default_val, + u32 conv_factor) +{ + int i; + + if (!of_property_read_u32_array(pdev->dev.of_node, name, buffer, + count)) { + for (i = 0; i < count; i++) + buffer[i] /= conv_factor; + return; + } + /* Does not exist, load default */ + for (i = 0; i < count; i++) + buffer[i] = default_val[i % 3]; +} + +static int xgene_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct xgene_phy_ctx *ctx; + struct resource *res; + u32 default_spd[] = DEFAULT_SATA_SPD_SEL; + u32 default_txboost_gain[] = DEFAULT_SATA_TXBOOST_GAIN; + u32 default_txeye_direction[] = DEFAULT_SATA_TXEYEDIRECTION; + u32 default_txeye_tuning[] = DEFAULT_SATA_TXEYETUNING; + u32 default_txamp[] = DEFAULT_SATA_TXAMP; + u32 default_txcn1[] = DEFAULT_SATA_TXCN1; + u32 default_txcn2[] = DEFAULT_SATA_TXCN2; + u32 default_txcp1[] = DEFAULT_SATA_TXCP1; + int i; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ctx->sds_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ctx->sds_base)) + return PTR_ERR(ctx->sds_base); + + /* Retrieve optional clock */ + ctx->clk = clk_get(&pdev->dev, NULL); + + /* Load override paramaters */ + xgene_phy_get_param(pdev, "apm,tx-eye-tuning", + ctx->sata_param.txeyetuning, 6, default_txeye_tuning, 1); + xgene_phy_get_param(pdev, "apm,tx-eye-direction", + ctx->sata_param.txeyedirection, 6, default_txeye_direction, 1); + xgene_phy_get_param(pdev, "apm,tx-boost-gain", + ctx->sata_param.txboostgain, 6, default_txboost_gain, 1); + xgene_phy_get_param(pdev, "apm,tx-amplitude", + ctx->sata_param.txamplitude, 6, default_txamp, 13300); + xgene_phy_get_param(pdev, "apm,tx-pre-cursor1", + ctx->sata_param.txprecursor_cn1, 6, default_txcn1, 18200); + xgene_phy_get_param(pdev, "apm,tx-pre-cursor2", + ctx->sata_param.txprecursor_cn2, 6, default_txcn2, 18200); + xgene_phy_get_param(pdev, "apm,tx-post-cursor", + ctx->sata_param.txpostcursor_cp1, 6, default_txcp1, 18200); + xgene_phy_get_param(pdev, "apm,tx-speed", + ctx->sata_param.txspeed, 3, default_spd, 1); + for (i = 0; i < MAX_LANE; i++) + ctx->sata_param.speed[i] = 2; /* Default to Gen3 */ + + platform_set_drvdata(pdev, ctx); + + ctx->phy = devm_phy_create(ctx->dev, NULL, &xgene_phy_ops); + if (IS_ERR(ctx->phy)) { + dev_dbg(&pdev->dev, "Failed to create PHY\n"); + return PTR_ERR(ctx->phy); + } + phy_set_drvdata(ctx->phy, ctx); + + phy_provider = devm_of_phy_provider_register(ctx->dev, xgene_phy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id xgene_phy_of_match[] = { + {.compatible = "apm,xgene-phy",}, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_phy_of_match); + +static struct platform_driver xgene_phy_driver = { + .probe = xgene_phy_probe, + .driver = { + .name = "xgene-phy", + .of_match_table = xgene_phy_of_match, + }, +}; +module_platform_driver(xgene_phy_driver); + +MODULE_DESCRIPTION("APM X-Gene Multi-Purpose PHY driver"); +MODULE_AUTHOR("Loc Ho "); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.1"); -- cgit v1.2.3-54-g00ecf