From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/power/ab8500_charger.c | 3771 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3771 insertions(+) create mode 100644 drivers/power/ab8500_charger.c (limited to 'drivers/power/ab8500_charger.c') diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c new file mode 100644 index 000000000..e388171f4 --- /dev/null +++ b/drivers/power/ab8500_charger.c @@ -0,0 +1,3771 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Charger driver for AB8500 + * + * License Terms: GNU General Public License v2 + * Author: + * Johan Palsson + * Karl Komierowski + * Arun R Murthy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Charger constants */ +#define NO_PW_CONN 0 +#define AC_PW_CONN 1 +#define USB_PW_CONN 2 + +#define MAIN_WDOG_ENA 0x01 +#define MAIN_WDOG_KICK 0x02 +#define MAIN_WDOG_DIS 0x00 +#define CHARG_WD_KICK 0x01 +#define MAIN_CH_ENA 0x01 +#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 +#define USB_CH_ENA 0x01 +#define USB_CHG_NO_OVERSHOOT_ENA_N 0x02 +#define MAIN_CH_DET 0x01 +#define MAIN_CH_CV_ON 0x04 +#define USB_CH_CV_ON 0x08 +#define VBUS_DET_DBNC100 0x02 +#define VBUS_DET_DBNC1 0x01 +#define OTP_ENABLE_WD 0x01 +#define DROP_COUNT_RESET 0x01 +#define USB_CH_DET 0x01 + +#define MAIN_CH_INPUT_CURR_SHIFT 4 +#define VBUS_IN_CURR_LIM_SHIFT 4 +#define AB8540_VBUS_IN_CURR_LIM_SHIFT 2 +#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 +#define AB8540_AUTO_VBUS_IN_CURR_MASK 0x3F +#define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */ + +#define LED_INDICATOR_PWM_ENA 0x01 +#define LED_INDICATOR_PWM_DIS 0x00 +#define LED_IND_CUR_5MA 0x04 +#define LED_INDICATOR_PWM_DUTY_252_256 0xBF + +/* HW failure constants */ +#define MAIN_CH_TH_PROT 0x02 +#define VBUS_CH_NOK 0x08 +#define USB_CH_TH_PROT 0x02 +#define VBUS_OVV_TH 0x01 +#define MAIN_CH_NOK 0x01 +#define VBUS_DET 0x80 + +#define MAIN_CH_STATUS2_MAINCHGDROP 0x80 +#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40 +#define USB_CH_VBUSDROP 0x40 +#define USB_CH_VBUSDETDBNC 0x01 + +/* UsbLineStatus register bit masks */ +#define AB8500_USB_LINK_STATUS 0x78 +#define AB8505_USB_LINK_STATUS 0xF8 +#define AB8500_STD_HOST_SUSP 0x18 +#define USB_LINK_STATUS_SHIFT 3 + +/* Watchdog timeout constant */ +#define WD_TIMER 0x30 /* 4min */ +#define WD_KICK_INTERVAL (60 * HZ) + +/* Lowest charger voltage is 3.39V -> 0x4E */ +#define LOW_VOLT_REG 0x4E + +/* Step up/down delay in us */ +#define STEP_UDELAY 1000 + +#define CHARGER_STATUS_POLL 10 /* in ms */ + +#define CHG_WD_INTERVAL (60 * HZ) + +#define AB8500_SW_CONTROL_FALLBACK 0x03 +/* Wait for enumeration before charing in us */ +#define WAIT_ACA_RID_ENUMERATION (5 * 1000) +/*External charger control*/ +#define AB8500_SYS_CHARGER_CONTROL_REG 0x52 +#define EXTERNAL_CHARGER_DISABLE_REG_VAL 0x03 +#define EXTERNAL_CHARGER_ENABLE_REG_VAL 0x07 + +/* UsbLineStatus register - usb types */ +enum ab8500_charger_link_status { + USB_STAT_NOT_CONFIGURED, + USB_STAT_STD_HOST_NC, + USB_STAT_STD_HOST_C_NS, + USB_STAT_STD_HOST_C_S, + USB_STAT_HOST_CHG_NM, + USB_STAT_HOST_CHG_HS, + USB_STAT_HOST_CHG_HS_CHIRP, + USB_STAT_DEDICATED_CHG, + USB_STAT_ACA_RID_A, + USB_STAT_ACA_RID_B, + USB_STAT_ACA_RID_C_NM, + USB_STAT_ACA_RID_C_HS, + USB_STAT_ACA_RID_C_HS_CHIRP, + USB_STAT_HM_IDGND, + USB_STAT_RESERVED, + USB_STAT_NOT_VALID_LINK, + USB_STAT_PHY_EN, + USB_STAT_SUP_NO_IDGND_VBUS, + USB_STAT_SUP_IDGND_VBUS, + USB_STAT_CHARGER_LINE_1, + USB_STAT_CARKIT_1, + USB_STAT_CARKIT_2, + USB_STAT_ACA_DOCK_CHARGER, +}; + +enum ab8500_usb_state { + AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */ + AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */ + AB8500_BM_USB_STATE_CONFIGURED, + AB8500_BM_USB_STATE_SUSPEND, + AB8500_BM_USB_STATE_RESUME, + AB8500_BM_USB_STATE_MAX, +}; + +/* VBUS input current limits supported in AB8500 in mA */ +#define USB_CH_IP_CUR_LVL_0P05 50 +#define USB_CH_IP_CUR_LVL_0P09 98 +#define USB_CH_IP_CUR_LVL_0P19 193 +#define USB_CH_IP_CUR_LVL_0P29 290 +#define USB_CH_IP_CUR_LVL_0P38 380 +#define USB_CH_IP_CUR_LVL_0P45 450 +#define USB_CH_IP_CUR_LVL_0P5 500 +#define USB_CH_IP_CUR_LVL_0P6 600 +#define USB_CH_IP_CUR_LVL_0P7 700 +#define USB_CH_IP_CUR_LVL_0P8 800 +#define USB_CH_IP_CUR_LVL_0P9 900 +#define USB_CH_IP_CUR_LVL_1P0 1000 +#define USB_CH_IP_CUR_LVL_1P1 1100 +#define USB_CH_IP_CUR_LVL_1P3 1300 +#define USB_CH_IP_CUR_LVL_1P4 1400 +#define USB_CH_IP_CUR_LVL_1P5 1500 + +#define VBAT_TRESH_IP_CUR_RED 3800 + +#define to_ab8500_charger_usb_device_info(x) container_of((x), \ + struct ab8500_charger, usb_chg) +#define to_ab8500_charger_ac_device_info(x) container_of((x), \ + struct ab8500_charger, ac_chg) + +/** + * struct ab8500_charger_interrupts - ab8500 interupts + * @name: name of the interrupt + * @isr function pointer to the isr + */ +struct ab8500_charger_interrupts { + char *name; + irqreturn_t (*isr)(int irq, void *data); +}; + +struct ab8500_charger_info { + int charger_connected; + int charger_online; + int charger_voltage; + int cv_active; + bool wd_expired; + int charger_current; +}; + +struct ab8500_charger_event_flags { + bool mainextchnotok; + bool main_thermal_prot; + bool usb_thermal_prot; + bool vbus_ovv; + bool usbchargernotok; + bool chgwdexp; + bool vbus_collapse; + bool vbus_drop_end; +}; + +struct ab8500_charger_usb_state { + int usb_current; + int usb_current_tmp; + enum ab8500_usb_state state; + enum ab8500_usb_state state_tmp; + spinlock_t usb_lock; +}; + +struct ab8500_charger_max_usb_in_curr { + int usb_type_max; + int set_max; + int calculated_max; +}; + +/** + * struct ab8500_charger - ab8500 Charger device information + * @dev: Pointer to the structure device + * @vbus_detected: VBUS detected + * @vbus_detected_start: + * VBUS detected during startup + * @ac_conn: This will be true when the AC charger has been plugged + * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC + * charger is enabled + * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB + * charger is enabled + * @vbat Battery voltage + * @old_vbat Previously measured battery voltage + * @usb_device_is_unrecognised USB device is unrecognised by the hardware + * @autopower Indicate if we should have automatic pwron after pwrloss + * @autopower_cfg platform specific power config support for "pwron after pwrloss" + * @invalid_charger_detect_state State when forcing AB to use invalid charger + * @is_aca_rid: Incicate if accessory is ACA type + * @current_stepping_sessions: + * Counter for current stepping sessions + * @parent: Pointer to the struct ab8500 + * @gpadc: Pointer to the struct gpadc + * @bm: Platform specific battery management information + * @flags: Structure for information about events triggered + * @usb_state: Structure for usb stack information + * @max_usb_in_curr: Max USB charger input current + * @ac_chg: AC charger power supply + * @usb_chg: USB charger power supply + * @ac: Structure that holds the AC charger properties + * @usb: Structure that holds the USB charger properties + * @regu: Pointer to the struct regulator + * @charger_wq: Work queue for the IRQs and checking HW state + * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals + * @pm_lock: Lock to prevent system to suspend + * @check_vbat_work Work for checking vbat threshold to adjust vbus current + * @check_hw_failure_work: Work for checking HW state + * @check_usbchgnotok_work: Work for checking USB charger not ok status + * @kick_wd_work: Work for kicking the charger watchdog in case + * of ABB rev 1.* due to the watchog logic bug + * @ac_charger_attached_work: Work for checking if AC charger is still + * connected + * @usb_charger_attached_work: Work for checking if USB charger is still + * connected + * @ac_work: Work for checking AC charger connection + * @detect_usb_type_work: Work for detecting the USB type connected + * @usb_link_status_work: Work for checking the new USB link status + * @usb_state_changed_work: Work for checking USB state + * @attach_work: Work for detecting USB type + * @vbus_drop_end_work: Work for detecting VBUS drop end + * @check_main_thermal_prot_work: + * Work for checking Main thermal status + * @check_usb_thermal_prot_work: + * Work for checking USB thermal status + * @charger_attached_mutex: For controlling the wakelock + */ +struct ab8500_charger { + struct device *dev; + bool vbus_detected; + bool vbus_detected_start; + bool ac_conn; + bool vddadc_en_ac; + bool vddadc_en_usb; + int vbat; + int old_vbat; + bool usb_device_is_unrecognised; + bool autopower; + bool autopower_cfg; + int invalid_charger_detect_state; + int is_aca_rid; + atomic_t current_stepping_sessions; + struct ab8500 *parent; + struct ab8500_gpadc *gpadc; + struct abx500_bm_data *bm; + struct ab8500_charger_event_flags flags; + struct ab8500_charger_usb_state usb_state; + struct ab8500_charger_max_usb_in_curr max_usb_in_curr; + struct ux500_charger ac_chg; + struct ux500_charger usb_chg; + struct ab8500_charger_info ac; + struct ab8500_charger_info usb; + struct regulator *regu; + struct workqueue_struct *charger_wq; + struct mutex usb_ipt_crnt_lock; + struct delayed_work check_vbat_work; + struct delayed_work check_hw_failure_work; + struct delayed_work check_usbchgnotok_work; + struct delayed_work kick_wd_work; + struct delayed_work usb_state_changed_work; + struct delayed_work attach_work; + struct delayed_work ac_charger_attached_work; + struct delayed_work usb_charger_attached_work; + struct delayed_work vbus_drop_end_work; + struct work_struct ac_work; + struct work_struct detect_usb_type_work; + struct work_struct usb_link_status_work; + struct work_struct check_main_thermal_prot_work; + struct work_struct check_usb_thermal_prot_work; + struct usb_phy *usb_phy; + struct notifier_block nb; + struct mutex charger_attached_mutex; +}; + +/* AC properties */ +static enum power_supply_property ab8500_charger_ac_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/* USB properties */ +static enum power_supply_property ab8500_charger_usb_props[] = { + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +/* + * Function for enabling and disabling sw fallback mode + * should always be disabled when no charger is connected. + */ +static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di, + bool fallback) +{ + u8 val; + u8 reg; + u8 bank; + u8 bit; + int ret; + + dev_dbg(di->dev, "SW Fallback: %d\n", fallback); + + if (is_ab8500(di->parent)) { + bank = 0x15; + reg = 0x0; + bit = 3; + } else { + bank = AB8500_SYS_CTRL1_BLOCK; + reg = AB8500_SW_CONTROL_FALLBACK; + bit = 0; + } + + /* read the register containing fallback bit */ + ret = abx500_get_register_interruptible(di->dev, bank, reg, &val); + if (ret < 0) { + dev_err(di->dev, "%d read failed\n", __LINE__); + return; + } + + if (is_ab8500(di->parent)) { + /* enable the OPT emulation registers */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + goto disable_otp; + } + } + + if (fallback) + val |= (1 << bit); + else + val &= ~(1 << bit); + + /* write back the changed fallback bit value to register */ + ret = abx500_set_register_interruptible(di->dev, bank, reg, val); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + } + +disable_otp: + if (is_ab8500(di->parent)) { + /* disable the set OTP registers again */ + ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0); + if (ret) { + dev_err(di->dev, "%d write failed\n", __LINE__); + } + } +} + +/** + * ab8500_power_supply_changed - a wrapper with local extentions for + * power_supply_changed + * @di: pointer to the ab8500_charger structure + * @psy: pointer to power_supply_that have changed. + * + */ +static void ab8500_power_supply_changed(struct ab8500_charger *di, + struct power_supply *psy) +{ + if (di->autopower_cfg) { + if (!di->usb.charger_connected && + !di->ac.charger_connected && + di->autopower) { + di->autopower = false; + ab8500_enable_disable_sw_fallback(di, false); + } else if (!di->autopower && + (di->ac.charger_connected || + di->usb.charger_connected)) { + di->autopower = true; + ab8500_enable_disable_sw_fallback(di, true); + } + } + power_supply_changed(psy); +} + +static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, + bool connected) +{ + if (connected != di->usb.charger_connected) { + dev_dbg(di->dev, "USB connected:%i\n", connected); + di->usb.charger_connected = connected; + + if (!connected) + di->flags.vbus_drop_end = false; + + sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL, "present"); + + if (connected) { + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); + } else { + cancel_delayed_work_sync(&di->usb_charger_attached_work); + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + } + } +} + +/** + * ab8500_charger_get_ac_voltage() - get ac charger voltage + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger voltage (on success) + */ +static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->ac.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed,\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_ac_cv() - check if the main charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_ac_cv(struct ab8500_charger *di) +{ + u8 val; + int ret = 0; + + /* Only check CV mode if the charger is online */ + if (di->ac.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & MAIN_CH_CV_ON) + ret = 1; + else + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_get_vbus_voltage() - get vbus voltage + * @di: pointer to the ab8500_charger structure + * + * This function returns the vbus voltage. + * Returns vbus voltage (on success) + */ +static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di) +{ + int vch; + + /* Only measure voltage if the charger is connected */ + if (di->usb.charger_connected) { + vch = ab8500_gpadc_convert(di->gpadc, VBUS_V); + if (vch < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + vch = 0; + } + return vch; +} + +/** + * ab8500_charger_get_usb_current() - get usb charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the usb charger current. + * Returns usb current (on success) and error code on failure + */ +static int ab8500_charger_get_usb_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->usb.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_get_ac_current() - get ac charger current + * @di: pointer to the ab8500_charger structure + * + * This function returns the ac charger current. + * Returns ac current (on success) and error code on failure. + */ +static int ab8500_charger_get_ac_current(struct ab8500_charger *di) +{ + int ich; + + /* Only measure current if the charger is online */ + if (di->ac.charger_online) { + ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C); + if (ich < 0) + dev_err(di->dev, "%s gpadc conv failed\n", __func__); + } else { + ich = 0; + } + return ich; +} + +/** + * ab8500_charger_usb_cv() - check if the usb charger is in CV mode + * @di: pointer to the ab8500_charger structure + * + * Returns ac charger CV mode (on success) else error code + */ +static int ab8500_charger_usb_cv(struct ab8500_charger *di) +{ + int ret; + u8 val; + + /* Only check CV mode if the charger is online */ + if (di->usb.charger_online) { + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return 0; + } + + if (val & USB_CH_CV_ON) + ret = 1; + else + ret = 0; + } else { + ret = 0; + } + + return ret; +} + +/** + * ab8500_charger_detect_chargers() - Detect the connected chargers + * @di: pointer to the ab8500_charger structure + * @probe: if probe, don't delay and wait for HW + * + * Returns the type of charger connected. + * For USB it will not mean we can actually charge from it + * but that there is a USB cable connected that we have to + * identify. This is used during startup when we don't get + * interrupts of the charger detection + * + * Returns an integer value, that means, + * NO_PW_CONN no power supply is connected + * AC_PW_CONN if the AC power supply is connected + * USB_PW_CONN if the USB power supply is connected + * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected + */ +static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe) +{ + int result = NO_PW_CONN; + int ret; + u8 val; + + /* Check for AC charger */ + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_STATUS1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if (val & MAIN_CH_DET) + result = AC_PW_CONN; + + /* Check for USB charger */ + + if (!probe) { + /* + * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100 + * when disconnecting ACA even though no + * charger was connected. Try waiting a little + * longer than the 100 ms of VBUS_DET_DBNC100... + */ + msleep(110); + } + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + dev_dbg(di->dev, + "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__, + val); + if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100)) + result |= USB_PW_CONN; + + return result; +} + +/** + * ab8500_charger_max_usb_curr() - get the max curr for the USB type + * @di: pointer to the ab8500_charger structure + * @link_status: the identified USB type + * + * Get the maximum current that is allowed to be drawn from the host + * based on the USB type. + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, + enum ab8500_charger_link_status link_status) +{ + int ret = 0; + + di->usb_device_is_unrecognised = false; + + /* + * Platform only supports USB 2.0. + * This means that charging current from USB source + * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_* + * should set USB_CH_IP_CUR_LVL_0P5. + */ + + switch (link_status) { + case USB_STAT_STD_HOST_NC: + case USB_STAT_STD_HOST_C_NS: + case USB_STAT_STD_HOST_C_S: + dev_dbg(di->dev, "USB Type - Standard host is " + "detected through USB driver\n"); + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + di->is_aca_rid = 0; + break; + case USB_STAT_HOST_CHG_HS_CHIRP: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + di->is_aca_rid = 0; + break; + case USB_STAT_HOST_CHG_HS: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + di->is_aca_rid = 0; + break; + case USB_STAT_ACA_RID_C_HS: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9; + di->is_aca_rid = 0; + break; + case USB_STAT_ACA_RID_A: + /* + * Dedicated charger level minus maximum current accessory + * can consume (900mA). Closest level is 500mA + */ + dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + di->is_aca_rid = 1; + break; + case USB_STAT_ACA_RID_B: + /* + * Dedicated charger level minus 120mA (20mA for ACA and + * 100mA for potential accessory). Closest level is 1300mA + */ + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, + di->max_usb_in_curr.usb_type_max); + di->is_aca_rid = 1; + break; + case USB_STAT_HOST_CHG_NM: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + di->is_aca_rid = 0; + break; + case USB_STAT_DEDICATED_CHG: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; + di->is_aca_rid = 0; + break; + case USB_STAT_ACA_RID_C_HS_CHIRP: + case USB_STAT_ACA_RID_C_NM: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; + di->is_aca_rid = 1; + break; + case USB_STAT_NOT_CONFIGURED: + if (di->vbus_detected) { + di->usb_device_is_unrecognised = true; + dev_dbg(di->dev, "USB Type - Legacy charger.\n"); + di->max_usb_in_curr.usb_type_max = + USB_CH_IP_CUR_LVL_1P5; + break; + } + case USB_STAT_HM_IDGND: + dev_err(di->dev, "USB Type - Charging not allowed\n"); + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + case USB_STAT_RESERVED: + if (is_ab8500(di->parent)) { + di->flags.vbus_collapse = true; + dev_err(di->dev, "USB Type - USB_STAT_RESERVED " + "VBUS has collapsed\n"); + ret = -ENXIO; + break; + } else { + dev_dbg(di->dev, "USB Type - Charging not allowed\n"); + di->max_usb_in_curr.usb_type_max = + USB_CH_IP_CUR_LVL_0P05; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", + link_status, + di->max_usb_in_curr.usb_type_max); + ret = -ENXIO; + break; + } + case USB_STAT_CARKIT_1: + case USB_STAT_CARKIT_2: + case USB_STAT_ACA_DOCK_CHARGER: + case USB_STAT_CHARGER_LINE_1: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, + di->max_usb_in_curr.usb_type_max); + break; + case USB_STAT_NOT_VALID_LINK: + dev_err(di->dev, "USB Type invalid - try charging anyway\n"); + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + break; + + default: + dev_err(di->dev, "USB Type - Unknown\n"); + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; + ret = -ENXIO; + break; + }; + + di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; + dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", + link_status, di->max_usb_in_curr.set_max); + + return ret; +} + +/** + * ab8500_charger_read_usb_type() - read the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_read_usb_type(struct ab8500_charger *di) +{ + int ret; + u8 val; + + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + else + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + /* get the USB type */ + if (is_ab8500(di->parent)) + val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; + else + val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/** + * ab8500_charger_detect_usb_type() - get the type of usb connected + * @di: pointer to the ab8500_charger structure + * + * Detect the type of the plugged USB + * Returns error code in case of failure else 0 on success + */ +static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) +{ + int i, ret; + u8 val; + + /* + * On getting the VBUS rising edge detect interrupt there + * is a 250ms delay after which the register UsbLineStatus + * is filled with valid data. + */ + for (i = 0; i < 10; i++) { + msleep(250); + ret = abx500_get_register_interruptible(di->dev, + AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, + &val); + dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n", + __func__, val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_STAT_REG, &val); + else + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return ret; + } + dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__, + val); + /* + * Until the IT source register is read the UsbLineStatus + * register is not updated, hence doing the same + * Revisit this: + */ + + /* get the USB type */ + if (is_ab8500(di->parent)) + val = (val & AB8500_USB_LINK_STATUS) >> + USB_LINK_STATUS_SHIFT; + else + val = (val & AB8505_USB_LINK_STATUS) >> + USB_LINK_STATUS_SHIFT; + if (val) + break; + } + ret = ab8500_charger_max_usb_curr(di, + (enum ab8500_charger_link_status) val); + + return ret; +} + +/* + * This array maps the raw hex value to charger voltage used by the AB8500 + * Values taken from the UM0836 + */ +static int ab8500_charger_voltage_map[] = { + 3500 , + 3525 , + 3550 , + 3575 , + 3600 , + 3625 , + 3650 , + 3675 , + 3700 , + 3725 , + 3750 , + 3775 , + 3800 , + 3825 , + 3850 , + 3875 , + 3900 , + 3925 , + 3950 , + 3975 , + 4000 , + 4025 , + 4050 , + 4060 , + 4070 , + 4080 , + 4090 , + 4100 , + 4110 , + 4120 , + 4130 , + 4140 , + 4150 , + 4160 , + 4170 , + 4180 , + 4190 , + 4200 , + 4210 , + 4220 , + 4230 , + 4240 , + 4250 , + 4260 , + 4270 , + 4280 , + 4290 , + 4300 , + 4310 , + 4320 , + 4330 , + 4340 , + 4350 , + 4360 , + 4370 , + 4380 , + 4390 , + 4400 , + 4410 , + 4420 , + 4430 , + 4440 , + 4450 , + 4460 , + 4470 , + 4480 , + 4490 , + 4500 , + 4510 , + 4520 , + 4530 , + 4540 , + 4550 , + 4560 , + 4570 , + 4580 , + 4590 , + 4600 , +}; + +static int ab8500_voltage_to_regval(int voltage) +{ + int i; + + /* Special case for voltage below 3.5V */ + if (voltage < ab8500_charger_voltage_map[0]) + return LOW_VOLT_REG; + + for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) { + if (voltage < ab8500_charger_voltage_map[i]) + return i - 1; + } + + /* If not last element, return error */ + i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1; + if (voltage == ab8500_charger_voltage_map[i]) + return i; + else + return -1; +} + +static int ab8500_current_to_regval(struct ab8500_charger *di, int curr) +{ + int i; + + if (curr < di->bm->chg_output_curr[0]) + return 0; + + for (i = 0; i < di->bm->n_chg_out_curr; i++) { + if (curr < di->bm->chg_output_curr[i]) + return i - 1; + } + + /* If not last element, return error */ + i = di->bm->n_chg_out_curr - 1; + if (curr == di->bm->chg_output_curr[i]) + return i; + else + return -1; +} + +static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr) +{ + int i; + + if (curr < di->bm->chg_input_curr[0]) + return 0; + + for (i = 0; i < di->bm->n_chg_in_curr; i++) { + if (curr < di->bm->chg_input_curr[i]) + return i - 1; + } + + /* If not last element, return error */ + i = di->bm->n_chg_in_curr - 1; + if (curr == di->bm->chg_input_curr[i]) + return i; + else + return -1; +} + +/** + * ab8500_charger_get_usb_cur() - get usb current + * @di: pointer to the ab8500_charger structre + * + * The usb stack provides the maximum current that can be drawn from + * the standard usb host. This will be in mA. + * This function converts current in mA to a value that can be written + * to the register. Returns -1 if charging is not allowed + */ +static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) +{ + int ret = 0; + switch (di->usb_state.usb_current) { + case 100: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09; + break; + case 200: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19; + break; + case 300: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29; + break; + case 400: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38; + break; + case 500: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; + break; + default: + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; + ret = -EPERM; + break; + }; + di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; + return ret; +} + +/** + * ab8500_charger_check_continue_stepping() - Check to allow stepping + * @di: pointer to the ab8500_charger structure + * @reg: select what charger register to check + * + * Check if current stepping should be allowed to continue. + * Checks if charger source has not collapsed. If it has, further stepping + * is not allowed. + */ +static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di, + int reg) +{ + if (reg == AB8500_USBCH_IPT_CRNTLVL_REG) + return !di->flags.vbus_drop_end; + else + return true; +} + +/** + * ab8500_charger_set_current() - set charger current + * @di: pointer to the ab8500_charger structure + * @ich: charger current, in mA + * @reg: select what charger register to set + * + * Set charger current. + * There is no state machine in the AB to step up/down the charger + * current to avoid dips and spikes on MAIN, VBUS and VBAT when + * charging is started. Instead we need to implement + * this charger current step-up/down here. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_current(struct ab8500_charger *di, + int ich, int reg) +{ + int ret = 0; + int curr_index, prev_curr_index, shift_value, i; + u8 reg_value; + u32 step_udelay; + bool no_stepping = false; + + atomic_inc(&di->current_stepping_sessions); + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + reg, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + goto exit_set_current; + } + + switch (reg) { + case AB8500_MCH_IPT_CURLVL_REG: + shift_value = MAIN_CH_INPUT_CURR_SHIFT; + prev_curr_index = (reg_value >> shift_value); + curr_index = ab8500_current_to_regval(di, ich); + step_udelay = STEP_UDELAY; + if (!di->ac.charger_connected) + no_stepping = true; + break; + case AB8500_USBCH_IPT_CRNTLVL_REG: + if (is_ab8540(di->parent)) + shift_value = AB8540_VBUS_IN_CURR_LIM_SHIFT; + else + shift_value = VBUS_IN_CURR_LIM_SHIFT; + prev_curr_index = (reg_value >> shift_value); + curr_index = ab8500_vbus_in_curr_to_regval(di, ich); + step_udelay = STEP_UDELAY * 100; + + if (!di->usb.charger_connected) + no_stepping = true; + break; + case AB8500_CH_OPT_CRNTLVL_REG: + shift_value = 0; + prev_curr_index = (reg_value >> shift_value); + curr_index = ab8500_current_to_regval(di, ich); + step_udelay = STEP_UDELAY; + if (curr_index && (curr_index - prev_curr_index) > 1) + step_udelay *= 100; + + if (!di->usb.charger_connected && !di->ac.charger_connected) + no_stepping = true; + + break; + default: + dev_err(di->dev, "%s current register not valid\n", __func__); + ret = -ENXIO; + goto exit_set_current; + } + + if (curr_index < 0) { + dev_err(di->dev, "requested current limit out-of-range\n"); + ret = -ENXIO; + goto exit_set_current; + } + + /* only update current if it's been changed */ + if (prev_curr_index == curr_index) { + dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n", + __func__, reg); + ret = 0; + goto exit_set_current; + } + + dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", + __func__, ich, reg); + + if (no_stepping) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + reg, (u8)curr_index << shift_value); + if (ret) + dev_err(di->dev, "%s write failed\n", __func__); + } else if (prev_curr_index > curr_index) { + for (i = prev_curr_index - 1; i >= curr_index; i--) { + dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n", + (u8) i << shift_value, reg); + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8)i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + goto exit_set_current; + } + if (i != curr_index) + usleep_range(step_udelay, step_udelay * 2); + } + } else { + bool allow = true; + for (i = prev_curr_index + 1; i <= curr_index && allow; i++) { + dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", + (u8)i << shift_value, reg); + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8)i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + goto exit_set_current; + } + if (i != curr_index) + usleep_range(step_udelay, step_udelay * 2); + + allow = ab8500_charger_check_continue_stepping(di, reg); + } + } + +exit_set_current: + atomic_dec(&di->current_stepping_sessions); + + return ret; +} + +/** + * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit + * @di: pointer to the ab8500_charger structure + * @ich_in: charger input current limit + * + * Sets the current that can be drawn from the USB host + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, + int ich_in) +{ + int min_value; + int ret; + + /* We should always use to lowest current limit */ + min_value = min(di->bm->chg_params->usb_curr_max, ich_in); + if (di->max_usb_in_curr.set_max > 0) + min_value = min(di->max_usb_in_curr.set_max, min_value); + + if (di->usb_state.usb_current >= 0) + min_value = min(di->usb_state.usb_current, min_value); + + switch (min_value) { + case 100: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P05; + break; + case 500: + if (di->vbat < VBAT_TRESH_IP_CUR_RED) + min_value = USB_CH_IP_CUR_LVL_0P45; + break; + default: + break; + } + + dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value); + + mutex_lock(&di->usb_ipt_crnt_lock); + ret = ab8500_charger_set_current(di, min_value, + AB8500_USBCH_IPT_CRNTLVL_REG); + mutex_unlock(&di->usb_ipt_crnt_lock); + + return ret; +} + +/** + * ab8500_charger_set_main_in_curr() - set main charger input current + * @di: pointer to the ab8500_charger structure + * @ich_in: input charger current, in mA + * + * Set main charger input current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, + int ich_in) +{ + return ab8500_charger_set_current(di, ich_in, + AB8500_MCH_IPT_CURLVL_REG); +} + +/** + * ab8500_charger_set_output_curr() - set charger output current + * @di: pointer to the ab8500_charger structure + * @ich_out: output charger current, in mA + * + * Set charger output current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_output_curr(struct ab8500_charger *di, + int ich_out) +{ + return ab8500_charger_set_current(di, ich_out, + AB8500_CH_OPT_CRNTLVL_REG); +} + +/** + * ab8500_charger_led_en() - turn on/off chargign led + * @di: pointer to the ab8500_charger structure + * @on: flag to turn on/off the chargign led + * + * Power ON/OFF charging LED indication + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_led_en(struct ab8500_charger *di, int on) +{ + int ret; + + if (on) { + /* Power ON charging LED indicator, set LED current to 5mA */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA)); + if (ret) { + dev_err(di->dev, "Power ON LED failed\n"); + return ret; + } + /* LED indicator PWM duty cycle 252/256 */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_DUTY, + LED_INDICATOR_PWM_DUTY_252_256); + if (ret) { + dev_err(di->dev, "Set LED PWM duty cycle failed\n"); + return ret; + } + } else { + /* Power off charging LED indicator */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_LED_INDICATOR_PWM_CTRL, + LED_INDICATOR_PWM_DIS); + if (ret) { + dev_err(di->dev, "Power-off LED failed\n"); + return ret; + } + } + + return ret; +} + +/** + * ab8500_charger_ac_en() - enable or disable ac charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @iset: charging current + * + * Enable/Disable AC/Mains charging and turns on/off the charging led + * respectively. + **/ +static int ab8500_charger_ac_en(struct ux500_charger *charger, + int enable, int vset, int iset) +{ + int ret; + int volt_index; + int curr_index; + int input_curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); + + if (enable) { + /* Check if AC is connected */ + if (!di->ac.charger_connected) { + dev_err(di->dev, "AC charger not connected\n"); + return -ENXIO; + } + + /* Enable AC charging */ + dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset); + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_ac) { + ret = regulator_enable(di->regu); + if (ret) + dev_warn(di->dev, + "Failed to enable regulator\n"); + else + di->vddadc_en_ac = true; + } + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(di, iset); + input_curr_index = ab8500_current_to_regval(di, + di->bm->chg_params->ac_curr_max); + if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: maximum battery charging voltage */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* MainChInputCurr: current that can be drawn from the charger*/ + ret = ab8500_charger_set_main_in_curr(di, + di->bm->chg_params->ac_curr_max); + if (ret) { + dev_err(di->dev, "%s Failed to set MainChInputCurr\n", + __func__); + return ret; + } + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, iset); + if (ret) { + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); + return ret; + } + + /* Check if VBAT overshoot control should be enabled */ + if (!di->bm->enable_overshoot) + overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N; + + /* Enable Main Charger */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* Power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + di->ac.charger_online = 1; + } else { + /* Disable AC charging */ + if (is_ab8500_1p1_or_earlier(di->parent)) { + /* + * For ABB revision 1.0 and 1.1 there is a bug in the + * watchdog logic. That means we have to continously + * kick the charger watchdog even when no charger is + * connected. This is only valid once the AC charger + * has been enabled. This is a bug that is not handled + * by the algorithm and the watchdog have to be kicked + * by the charger driver when the AC charger + * is disabled + */ + if (di->ac_conn) { + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + + /* + * We can't turn off charging completely + * due to a bug in AB8500 cut1. + * If we do, charging will not start again. + * That is why we set the lowest voltage + * and current possible + */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = ab8500_charger_set_output_curr(di, 0); + if (ret) { + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); + return ret; + } + } else { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_MCH_CTRL1, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + + di->ac.charger_online = 0; + di->ac.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_ac) { + regulator_disable(di->regu); + di->vddadc_en_ac = false; + } + + dev_dbg(di->dev, "%s Disabled AC charging\n", __func__); + } + ab8500_power_supply_changed(di, di->ac_chg.psy); + + return ret; +} + +/** + * ab8500_charger_usb_en() - enable usb charging + * @di: pointer to the ab8500_charger structure + * @enable: enable/disable flag + * @vset: charging voltage + * @ich_out: charger output current + * + * Enable/Disable USB charging and turns on/off the charging led respectively. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_en(struct ux500_charger *charger, + int enable, int vset, int ich_out) +{ + int ret; + int volt_index; + int curr_index; + u8 overshoot = 0; + + struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); + + if (enable) { + /* Check if USB is connected */ + if (!di->usb.charger_connected) { + dev_err(di->dev, "USB charger not connected\n"); + return -ENXIO; + } + + /* + * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts + * will be triggered everytime we enable the VDD ADC supply. + * This will turn off charging for a short while. + * It can be avoided by having the supply on when + * there is a charger enabled. Normally the VDD ADC supply + * is enabled everytime a GPADC conversion is triggered. We will + * force it to be enabled from this driver to have + * the GPADC module independant of the AB8500 chargers + */ + if (!di->vddadc_en_usb) { + ret = regulator_enable(di->regu); + if (ret) + dev_warn(di->dev, + "Failed to enable regulator\n"); + else + di->vddadc_en_usb = true; + } + + /* Enable USB charging */ + dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out); + + /* Check if the requested voltage or current is valid */ + volt_index = ab8500_voltage_to_regval(vset); + curr_index = ab8500_current_to_regval(di, ich_out); + if (volt_index < 0 || curr_index < 0) { + dev_err(di->dev, + "Charger voltage or current too high, " + "charging not started\n"); + return -ENXIO; + } + + /* ChVoltLevel: max voltage upto which battery can be charged */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_VOLT_LVL_REG, (u8) volt_index); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + /* Check if VBAT overshoot control should be enabled */ + if (!di->bm->enable_overshoot) + overshoot = USB_CHG_NO_OVERSHOOT_ENA_N; + + /* Enable USB Charger */ + dev_dbg(di->dev, + "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n"); + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + /* If success power on charging LED indication */ + ret = ab8500_charger_led_en(di, true); + if (ret < 0) + dev_err(di->dev, "failed to enable LED\n"); + + di->usb.charger_online = 1; + + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, ich_out); + if (ret) { + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); + return ret; + } + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ); + + } else { + /* Disable USB charging */ + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, 0); + if (ret) { + dev_err(di->dev, + "%s write failed\n", __func__); + return ret; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) + dev_err(di->dev, "failed to disable LED\n"); + /* USBChInputCurr: current that can be drawn from the usb */ + ret = ab8500_charger_set_vbus_in_curr(di, 0); + if (ret) { + dev_err(di->dev, "setting USBChInputCurr failed\n"); + return ret; + } + + /* ChOutputCurentLevel: protected output current */ + ret = ab8500_charger_set_output_curr(di, 0); + if (ret) { + dev_err(di->dev, "%s " + "Failed to reset ChOutputCurentLevel\n", + __func__); + return ret; + } + di->usb.charger_online = 0; + di->usb.wd_expired = false; + + /* Disable regulator if enabled */ + if (di->vddadc_en_usb) { + regulator_disable(di->regu); + di->vddadc_en_usb = false; + } + + dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); + + /* Cancel any pending Vbat check work */ + cancel_delayed_work(&di->check_vbat_work); + + } + ab8500_power_supply_changed(di, di->usb_chg.psy); + + return ret; +} + +static int ab8500_external_charger_prepare(struct notifier_block *charger_nb, + unsigned long event, void *data) +{ + int ret; + struct device *dev = data; + /*Toggle External charger control pin*/ + ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, + AB8500_SYS_CHARGER_CONTROL_REG, + EXTERNAL_CHARGER_DISABLE_REG_VAL); + if (ret < 0) { + dev_err(dev, "write reg failed %d\n", ret); + goto out; + } + ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, + AB8500_SYS_CHARGER_CONTROL_REG, + EXTERNAL_CHARGER_ENABLE_REG_VAL); + if (ret < 0) + dev_err(dev, "Write reg failed %d\n", ret); + +out: + return ret; +} + +/** + * ab8500_charger_usb_check_enable() - enable usb charging + * @charger: pointer to the ux500_charger structure + * @vset: charging voltage + * @iset: charger output current + * + * Check if the VBUS charger has been disconnected and reconnected without + * AB8500 rising an interrupt. Returns 0 on success. + */ +static int ab8500_charger_usb_check_enable(struct ux500_charger *charger, + int vset, int iset) +{ + u8 usbch_ctrl1 = 0; + int ret = 0; + + struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); + + if (!di->usb.charger_connected) + return ret; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, &usbch_ctrl1); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + return ret; + } + dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1); + + if (!(usbch_ctrl1 & USB_CH_ENA)) { + dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, + DROP_COUNT_RESET, DROP_COUNT_RESET); + if (ret < 0) { + dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); + return ret; + } + + ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset); + if (ret < 0) { + dev_err(di->dev, "Failed to enable VBUS charger %d\n", + __LINE__); + return ret; + } + } + return ret; +} + +/** + * ab8500_charger_ac_check_enable() - enable usb charging + * @charger: pointer to the ux500_charger structure + * @vset: charging voltage + * @iset: charger output current + * + * Check if the AC charger has been disconnected and reconnected without + * AB8500 rising an interrupt. Returns 0 on success. + */ +static int ab8500_charger_ac_check_enable(struct ux500_charger *charger, + int vset, int iset) +{ + u8 mainch_ctrl1 = 0; + int ret = 0; + + struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); + + if (!di->ac.charger_connected) + return ret; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_CTRL1, &mainch_ctrl1); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + return ret; + } + dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1); + + if (!(mainch_ctrl1 & MAIN_CH_ENA)) { + dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, + DROP_COUNT_RESET, DROP_COUNT_RESET); + + if (ret < 0) { + dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); + return ret; + } + + ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset); + if (ret < 0) { + dev_err(di->dev, "failed to enable AC charger %d\n", + __LINE__); + return ret; + } + } + return ret; +} + +/** + * ab8500_charger_watchdog_kick() - kick charger watchdog + * @di: pointer to the ab8500_charger structure + * + * Kick charger watchdog + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_watchdog_kick(struct ux500_charger *charger) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + return ret; +} + +/** + * ab8500_charger_update_charger_current() - update charger current + * @di: pointer to the ab8500_charger structure + * + * Update the charger output current for the specified charger + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_update_charger_current(struct ux500_charger *charger, + int ich_out) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS) + di = to_ab8500_charger_ac_device_info(charger); + else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = ab8500_charger_set_output_curr(di, ich_out); + if (ret) { + dev_err(di->dev, "%s " + "Failed to set ChOutputCurentLevel\n", + __func__); + return ret; + } + + /* Reset the main and usb drop input current measurement counter */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARGER_CTRL, DROP_COUNT_RESET); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + +/** + * ab8540_charger_power_path_enable() - enable usb power path mode + * @charger: pointer to the ux500_charger structure + * @enable: enable/disable flag + * + * Enable or disable the power path for usb mode + * Returns error code in case of failure else 0(on success) + */ +static int ab8540_charger_power_path_enable(struct ux500_charger *charger, + bool enable) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_MODE_REG, + BUS_POWER_PATH_MODE_ENA, enable); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + + +/** + * ab8540_charger_usb_pre_chg_enable() - enable usb pre change + * @charger: pointer to the ux500_charger structure + * @enable: enable/disable flag + * + * Enable or disable the pre-chage for usb mode + * Returns error code in case of failure else 0(on success) + */ +static int ab8540_charger_usb_pre_chg_enable(struct ux500_charger *charger, + bool enable) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_CHR_REG, + BUS_POWER_PATH_PRECHG_ENA, enable); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + +static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data) +{ + struct power_supply *psy; + struct power_supply *ext; + struct ab8500_charger *di; + union power_supply_propval ret; + int i, j; + bool psy_found = false; + struct ux500_charger *usb_chg; + + usb_chg = (struct ux500_charger *)data; + psy = usb_chg->psy; + + di = to_ab8500_charger_usb_device_info(usb_chg); + + ext = dev_get_drvdata(dev); + + /* For all psy where the driver name appears in any supplied_to */ + for (i = 0; i < ext->num_supplicants; i++) { + if (!strcmp(ext->supplied_to[i], psy->desc->name)) + psy_found = true; + } + + if (!psy_found) + return 0; + + /* Go through all properties for the psy */ + for (j = 0; j < ext->desc->num_properties; j++) { + enum power_supply_property prop; + prop = ext->desc->properties[j]; + + if (power_supply_get_property(ext, prop, &ret)) + continue; + + switch (prop) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + switch (ext->desc->type) { + case POWER_SUPPLY_TYPE_BATTERY: + di->vbat = ret.intval / 1000; + break; + default: + break; + } + break; + default: + break; + } + } + return 0; +} + +/** + * ab8500_charger_check_vbat_work() - keep vbus current within spec + * @work pointer to the work_struct structure + * + * Due to a asic bug it is necessary to lower the input current to the vbus + * charger when charging with at some specific levels. This issue is only valid + * for below a certain battery voltage. This function makes sure that the + * the allowed current limit isn't exceeded. + */ +static void ab8500_charger_check_vbat_work(struct work_struct *work) +{ + int t = 10; + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_vbat_work.work); + + class_for_each_device(power_supply_class, NULL, + di->usb_chg.psy, ab8500_charger_get_ext_psy_data); + + /* First run old_vbat is 0. */ + if (di->old_vbat == 0) + di->old_vbat = di->vbat; + + if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED && + di->vbat <= VBAT_TRESH_IP_CUR_RED) || + (di->old_vbat > VBAT_TRESH_IP_CUR_RED && + di->vbat > VBAT_TRESH_IP_CUR_RED))) { + + dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," + " old: %d\n", di->max_usb_in_curr.usb_type_max, + di->vbat, di->old_vbat); + ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); + power_supply_changed(di->usb_chg.psy); + } + + di->old_vbat = di->vbat; + + /* + * No need to check the battery voltage every second when not close to + * the threshold. + */ + if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) && + (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100))) + t = 1; + + queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ); +} + +/** + * ab8500_charger_check_hw_failure_work() - check main charger failure + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_check_hw_failure_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_hw_failure_work.work); + + /* Check if the status bits for HW failure is still active */ + if (di->flags.mainextchnotok) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & MAIN_CH_NOK)) { + di->flags.mainextchnotok = false; + ab8500_power_supply_changed(di, di->ac_chg.psy); + } + } + if (di->flags.vbus_ovv) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, + ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (!(reg_value & VBUS_OVV_TH)) { + di->flags.vbus_ovv = false; + ab8500_power_supply_changed(di, di->usb_chg.psy); + } + } + /* If we still have a failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, round_jiffies(HZ)); + } +} + +/** + * ab8500_charger_kick_watchdog_work() - kick the watchdog + * @work: pointer to the work_struct structure + * + * Work queue function for kicking the charger watchdog. + * + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ +static void ab8500_charger_kick_watchdog_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, kick_wd_work.work); + + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* Schedule a new watchdog kick */ + queue_delayed_work(di->charger_wq, + &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL)); +} + +/** + * ab8500_charger_ac_work() - work to get and set main charger status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the main charger status + */ +static void ab8500_charger_ac_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, ac_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if the main charger is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di, false); + if (ret < 0) + return; + + if (ret & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + } else { + di->ac.charger_connected = 0; + } + + ab8500_power_supply_changed(di, di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present"); +} + +static void ab8500_charger_usb_attached_work(struct work_struct *work) +{ + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, + usb_charger_attached_work.work); + int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC); + int ret, i; + u8 statval; + + for (i = 0; i < 10; i++) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, + &statval); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + goto reschedule; + } + if ((statval & usbch) != usbch) + goto reschedule; + + msleep(CHARGER_STATUS_POLL); + } + + ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0); + + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + return; + +reschedule: + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); +} + +static void ab8500_charger_ac_attached_work(struct work_struct *work) +{ + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, + ac_charger_attached_work.work); + int mainch = (MAIN_CH_STATUS2_MAINCHGDROP | + MAIN_CH_STATUS2_MAINCHARGERDETDBNC); + int ret, i; + u8 statval; + + for (i = 0; i < 10; i++) { + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_STATUS2_REG, + &statval); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + goto reschedule; + } + + if ((statval & mainch) != mainch) + goto reschedule; + + msleep(CHARGER_STATUS_POLL); + } + + ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0); + queue_work(di->charger_wq, &di->ac_work); + + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + return; + +reschedule: + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); +} + +/** + * ab8500_charger_detect_usb_type_work() - work to detect USB type + * @work: Pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_detect_usb_type_work(struct work_struct *work) +{ + int ret; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, detect_usb_type_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + ret = ab8500_charger_detect_chargers(di, false); + if (ret < 0) + return; + + if (!(ret & USB_PW_CONN)) { + dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__); + di->vbus_detected = false; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, di->usb_chg.psy); + } else { + dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__); + di->vbus_detected = true; + + if (is_ab8500_1p1_or_earlier(di->parent)) { + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, + di->usb_chg.psy); + } + } else { + /* + * For ABB cut2.0 and onwards we have an IRQ, + * USB_LINK_STATUS that will be triggered when the USB + * link status changes. The exception is USB connected + * during startup. Then we don't get a + * USB_LINK_STATUS IRQ + */ + if (di->vbus_detected_start) { + di->vbus_detected_start = false; + ret = ab8500_charger_detect_usb_type(di); + if (!ret) { + ab8500_charger_set_usb_connected(di, + true); + ab8500_power_supply_changed(di, + di->usb_chg.psy); + } + } + } + } +} + +/** + * ab8500_charger_usb_link_attach_work() - work to detect USB type + * @work: pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_usb_link_attach_work(struct work_struct *work) +{ + struct ab8500_charger *di = + container_of(work, struct ab8500_charger, attach_work.work); + int ret; + + /* Update maximum input current if USB enumeration is not detected */ + if (!di->usb.charger_online) { + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); + if (ret) + return; + } + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, di->usb_chg.psy); +} + +/** + * ab8500_charger_usb_link_status_work() - work to detect USB type + * @work: pointer to the work_struct structure + * + * Detect the type of USB plugged + */ +static void ab8500_charger_usb_link_status_work(struct work_struct *work) +{ + int detected_chargers; + int ret; + u8 val; + u8 link_status; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_link_status_work); + + /* + * Since we can't be sure that the events are received + * synchronously, we have the check if is + * connected by reading the status register + */ + detected_chargers = ab8500_charger_detect_chargers(di, false); + if (detected_chargers < 0) + return; + + /* + * Some chargers that breaks the USB spec is + * identified as invalid by AB8500 and it refuse + * to start the charging process. but by jumping + * thru a few hoops it can be forced to start. + */ + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + else + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINK1_STAT_REG, &val); + + if (ret >= 0) + dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val); + else + dev_dbg(di->dev, "Error reading USB link status\n"); + + if (is_ab8500(di->parent)) + link_status = AB8500_USB_LINK_STATUS; + else + link_status = AB8505_USB_LINK_STATUS; + + if (detected_chargers & USB_PW_CONN) { + if (((val & link_status) >> USB_LINK_STATUS_SHIFT) == + USB_STAT_NOT_VALID_LINK && + di->invalid_charger_detect_state == 0) { + dev_dbg(di->dev, + "Invalid charger detected, state= 0\n"); + /*Enable charger*/ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, + USB_CH_ENA, USB_CH_ENA); + /*Enable charger detection*/ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_CTRL2_REG, + USB_CH_DET, USB_CH_DET); + di->invalid_charger_detect_state = 1; + /*exit and wait for new link status interrupt.*/ + return; + + } + if (di->invalid_charger_detect_state == 1) { + dev_dbg(di->dev, + "Invalid charger detected, state= 1\n"); + /*Stop charger detection*/ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_CTRL2_REG, + USB_CH_DET, 0x00); + /*Check link status*/ + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_STAT_REG, + &val); + else + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, + &val); + + dev_dbg(di->dev, "USB link status= 0x%02x\n", + (val & link_status) >> USB_LINK_STATUS_SHIFT); + di->invalid_charger_detect_state = 2; + } + } else { + di->invalid_charger_detect_state = 0; + } + + if (!(detected_chargers & USB_PW_CONN)) { + di->vbus_detected = false; + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, di->usb_chg.psy); + return; + } + + dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__); + di->vbus_detected = true; + ret = ab8500_charger_read_usb_type(di); + if (ret) { + if (ret == -ENXIO) { + /* No valid charger type detected */ + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, di->usb_chg.psy); + } + return; + } + + if (di->usb_device_is_unrecognised) { + dev_dbg(di->dev, + "Potential Legacy Charger device. " + "Delay work for %d msec for USB enum " + "to finish", + WAIT_ACA_RID_ENUMERATION); + queue_delayed_work(di->charger_wq, + &di->attach_work, + msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); + } else if (di->is_aca_rid == 1) { + /* Only wait once */ + di->is_aca_rid++; + dev_dbg(di->dev, + "%s Wait %d msec for USB enum to finish", + __func__, WAIT_ACA_RID_ENUMERATION); + queue_delayed_work(di->charger_wq, + &di->attach_work, + msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION)); + } else { + queue_delayed_work(di->charger_wq, + &di->attach_work, + 0); + } +} + +static void ab8500_charger_usb_state_changed_work(struct work_struct *work) +{ + int ret; + unsigned long flags; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, usb_state_changed_work.work); + + if (!di->vbus_detected) { + dev_dbg(di->dev, + "%s !di->vbus_detected\n", + __func__); + return; + } + + spin_lock_irqsave(&di->usb_state.usb_lock, flags); + di->usb_state.state = di->usb_state.state_tmp; + di->usb_state.usb_current = di->usb_state.usb_current_tmp; + spin_unlock_irqrestore(&di->usb_state.usb_lock, flags); + + dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n", + __func__, di->usb_state.state, di->usb_state.usb_current); + + switch (di->usb_state.state) { + case AB8500_BM_USB_STATE_RESET_HS: + case AB8500_BM_USB_STATE_RESET_FS: + case AB8500_BM_USB_STATE_SUSPEND: + case AB8500_BM_USB_STATE_MAX: + ab8500_charger_set_usb_connected(di, false); + ab8500_power_supply_changed(di, di->usb_chg.psy); + break; + + case AB8500_BM_USB_STATE_RESUME: + /* + * when suspend->resume there should be delay + * of 1sec for enabling charging + */ + msleep(1000); + /* Intentional fall through */ + case AB8500_BM_USB_STATE_CONFIGURED: + /* + * USB is configured, enable charging with the charging + * input current obtained from USB driver + */ + if (!ab8500_charger_get_usb_cur(di)) { + /* Update maximum input current */ + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); + if (ret) + return; + + ab8500_charger_set_usb_connected(di, true); + ab8500_power_supply_changed(di, di->usb_chg.psy); + } + break; + + default: + break; + }; +} + +/** + * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB charger Not OK status + */ +static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work) +{ + int ret; + u8 reg_value; + bool prev_status; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usbchgnotok_work.work); + + /* Check if the status bit for usbchargernotok is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + prev_status = di->flags.usbchargernotok; + + if (reg_value & VBUS_CH_NOK) { + di->flags.usbchargernotok = true; + /* Check again in 1sec */ + queue_delayed_work(di->charger_wq, + &di->check_usbchgnotok_work, HZ); + } else { + di->flags.usbchargernotok = false; + di->flags.vbus_collapse = false; + } + + if (prev_status != di->flags.usbchargernotok) + ab8500_power_supply_changed(di, di->usb_chg.psy); +} + +/** + * ab8500_charger_check_main_thermal_prot_work() - check main thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the Main thermal prot status + */ +static void ab8500_charger_check_main_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_main_thermal_prot_work); + + /* Check if the status bit for main_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_STATUS2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & MAIN_CH_TH_PROT) + di->flags.main_thermal_prot = true; + else + di->flags.main_thermal_prot = false; + + ab8500_power_supply_changed(di, di->ac_chg.psy); +} + +/** + * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status + * @work: pointer to the work_struct structure + * + * Work queue function for checking the USB thermal prot status + */ +static void ab8500_charger_check_usb_thermal_prot_work( + struct work_struct *work) +{ + int ret; + u8 reg_value; + + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, check_usb_thermal_prot_work); + + /* Check if the status bit for usb_thermal_prot is still active */ + ret = abx500_get_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s ab8500 read failed\n", __func__); + return; + } + if (reg_value & USB_CH_TH_PROT) + di->flags.usb_thermal_prot = true; + else + di->flags.usb_thermal_prot = false; + + ab8500_power_supply_changed(di, di->usb_chg.psy); +} + +/** + * ab8500_charger_mainchunplugdet_handler() - main charger unplugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger unplugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + cancel_delayed_work_sync(&di->ac_charger_attached_work); + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchplugdet_handler() - main charger plugged + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger plugged\n"); + queue_work(di->charger_wq, &di->ac_work); + + mutex_lock(&di->charger_attached_mutex); + mutex_unlock(&di->charger_attached_mutex); + + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainextchnotok_handler() - main charger not ok + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Main charger not ok\n"); + di->flags.mainextchnotok = true; + ab8500_power_supply_changed(di, di->ac_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for Main charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_main_thermal_prot_work); + + return IRQ_HANDLED; +} + +static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) +{ + struct ab8500_charger *di = container_of(work, + struct ab8500_charger, vbus_drop_end_work.work); + int ret, curr; + u8 reg_value; + + di->flags.vbus_drop_end = false; + + /* Reset the drop counter */ + abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); + + if (is_ab8540(di->parent)) + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8540_CH_USBCH_STAT3_REG, ®_value); + else + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + return; + } + + if (is_ab8540(di->parent)) + curr = di->bm->chg_input_curr[ + reg_value & AB8540_AUTO_VBUS_IN_CURR_MASK]; + else + curr = di->bm->chg_input_curr[ + reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT]; + + if (di->max_usb_in_curr.calculated_max != curr) { + /* USB source is collapsing */ + di->max_usb_in_curr.calculated_max = curr; + dev_dbg(di->dev, + "VBUS input current limiting to %d mA\n", + di->max_usb_in_curr.calculated_max); + } else { + /* + * USB source can not give more than this amount. + * Taking more will collapse the source. + */ + di->max_usb_in_curr.set_max = + di->max_usb_in_curr.calculated_max; + dev_dbg(di->dev, + "VBUS input current limited to %d mA\n", + di->max_usb_in_curr.set_max); + } + + if (di->usb.charger_connected) + ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); +} + +/** + * ab8500_charger_vbusdetf_handler() - VBUS falling detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + di->vbus_detected = false; + dev_dbg(di->dev, "VBUS falling detected\n"); + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusdetr_handler() - VBUS rising detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + di->vbus_detected = true; + dev_dbg(di->dev, "VBUS rising detected\n"); + + queue_work(di->charger_wq, &di->detect_usb_type_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usblinkstatus_handler() - USB link status has changed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "USB link status changed\n"); + + queue_work(di->charger_wq, &di->usb_link_status_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp above USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger + * thermal protection threshold + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, + "Die temp ok for USB charger thermal protection threshold\n"); + queue_work(di->charger_wq, &di->check_usb_thermal_prot_work); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Not allowed USB charger detected\n"); + queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_chwdexp_handler() - Charger watchdog expired + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "Charger watchdog expired\n"); + + /* + * The charger that was online when the watchdog expired + * needs to be restarted for charging to start again + */ + if (di->ac.charger_online) { + di->ac.wd_expired = true; + ab8500_power_supply_changed(di, di->ac_chg.psy); + } + if (di->usb.charger_online) { + di->usb.wd_expired = true; + ab8500_power_supply_changed(di, di->usb_chg.psy); + } + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbuschdropend_handler() - VBUS drop removed + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS charger drop ended\n"); + di->flags.vbus_drop_end = true; + + /* + * VBUS might have dropped due to bad connection. + * Schedule a new input limit set to the value SW requests. + */ + queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, + round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ)); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected + * @irq: interrupt number + * @_di: pointer to the ab8500_charger structure + * + * Returns IRQ status(IRQ_HANDLED) + */ +static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di) +{ + struct ab8500_charger *di = _di; + + dev_dbg(di->dev, "VBUS overvoltage detected\n"); + di->flags.vbus_ovv = true; + ab8500_power_supply_changed(di, di->usb_chg.psy); + + /* Schedule a new HW failure check */ + queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0); + + return IRQ_HANDLED; +} + +/** + * ab8500_charger_ac_get_property() - get the ac/mains properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the ac/mains + * properties by reading the sysfs files. + * AC/Mains properties are online, present and voltage. + * online: ac/mains charging is in progress or not + * present: presence of the ac/mains + * voltage: AC/Mains voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + int ret; + + di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.mainextchnotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.main_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->ac.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->ac.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ab8500_charger_get_ac_voltage(di); + if (ret >= 0) + di->ac.charger_voltage = ret; + /* On error, use previous value */ + val->intval = di->ac.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the AC charger + */ + di->ac.cv_active = ab8500_charger_ac_cv(di); + val->intval = di->ac.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ab8500_charger_get_ac_current(di); + if (ret >= 0) + di->ac.charger_current = ret; + val->intval = di->ac.charger_current * 1000; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_usb_get_property() - get the usb properties + * @psy: pointer to the power_supply structure + * @psp: pointer to the power_supply_property structure + * @val: pointer to the power_supply_propval union + * + * This function gets called when an application tries to get the usb + * properties by reading the sysfs files. + * USB properties are online, present and voltage. + * online: usb charging is in progress or not + * present: presence of the usb + * voltage: vbus voltage + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_usb_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct ab8500_charger *di; + int ret; + + di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy)); + + switch (psp) { + case POWER_SUPPLY_PROP_HEALTH: + if (di->flags.usbchargernotok) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (di->ac.wd_expired || di->usb.wd_expired) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (di->flags.usb_thermal_prot) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (di->flags.vbus_ovv) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = di->usb.charger_online; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = di->usb.charger_connected; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = ab8500_charger_get_vbus_voltage(di); + if (ret >= 0) + di->usb.charger_voltage = ret; + val->intval = di->usb.charger_voltage * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* + * This property is used to indicate when CV mode is entered + * for the USB charger + */ + di->usb.cv_active = ab8500_charger_usb_cv(di); + val->intval = di->usb.cv_active; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = ab8500_charger_get_usb_current(di); + if (ret >= 0) + di->usb.charger_current = ret; + val->intval = di->usb.charger_current * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + /* + * This property is used to indicate when VBUS has collapsed + * due to too high output current from the USB charger + */ + if (di->flags.vbus_collapse) + val->intval = 1; + else + val->intval = 0; + break; + default: + return -EINVAL; + } + return 0; +} + +/** + * ab8500_charger_init_hw_registers() - Set up charger related registers + * @di: pointer to the ab8500_charger structure + * + * Set up charger OVV, watchdog and maximum voltage registers as well as + * charging of the backup battery + */ +static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) +{ + int ret = 0; + u8 bup_vch_range = 0, vbup33_vrtcn = 0; + + /* Setup maximum charger current and voltage for ABB cut2.0 */ + if (!is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_VOLT_LVL_MAX_REG\n"); + goto out; + } + + if (is_ab8540(di->parent)) + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, + CH_OP_CUR_LVL_2P); + else + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, + CH_OP_CUR_LVL_1P6); + if (ret) { + dev_err(di->dev, + "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); + goto out; + } + } + + if (is_ab9540_2p0(di->parent) || is_ab9540_3p0(di->parent) + || is_ab8505_2p0(di->parent) || is_ab8540(di->parent)) + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_AUTO_IN_CURR_LIM_ENA, + VBUS_AUTO_IN_CURR_LIM_ENA); + else + /* + * VBUS OVV set to 6.3V and enable automatic current limitation + */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, + AB8500_USBCH_CTRL2_REG, + VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA); + if (ret) { + dev_err(di->dev, + "failed to set automatic current limitation\n"); + goto out; + } + + /* Enable main watchdog in OTP */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD); + if (ret) { + dev_err(di->dev, "failed to enable main WD in OTP\n"); + goto out; + } + + /* Enable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA); + if (ret) { + dev_err(di->dev, "faile to enable main watchdog\n"); + goto out; + } + + /* + * Due to internal synchronisation, Enable and Kick watchdog bits + * cannot be enabled in a single write. + * A minimum delay of 2*32 kHz period (62.5µs) must be inserted + * between writing Enable then Kick bits. + */ + udelay(63); + + /* Kick main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, + (MAIN_WDOG_ENA | MAIN_WDOG_KICK)); + if (ret) { + dev_err(di->dev, "failed to kick main watchdog\n"); + goto out; + } + + /* Disable main watchdog */ + ret = abx500_set_register_interruptible(di->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS); + if (ret) { + dev_err(di->dev, "failed to disable main watchdog\n"); + goto out; + } + + /* Set watchdog timeout */ + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_WD_TIMER_REG, WD_TIMER); + if (ret) { + dev_err(di->dev, "failed to set charger watchdog timeout\n"); + goto out; + } + + ret = ab8500_charger_led_en(di, false); + if (ret < 0) { + dev_err(di->dev, "failed to disable LED\n"); + goto out; + } + + /* Backup battery voltage and current */ + if (di->bm->bkup_bat_v > BUP_VCH_SEL_3P1V) + bup_vch_range = BUP_VCH_RANGE; + if (di->bm->bkup_bat_v == BUP_VCH_SEL_3P3V) + vbup33_vrtcn = VBUP33_VRTCN; + + ret = abx500_set_register_interruptible(di->dev, + AB8500_RTC, + AB8500_RTC_BACKUP_CHG_REG, + (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i); + if (ret) { + dev_err(di->dev, "failed to setup backup battery charging\n"); + goto out; + } + if (is_ab8540(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_RTC, + AB8500_RTC_CTRL1_REG, + bup_vch_range | vbup33_vrtcn); + if (ret) { + dev_err(di->dev, + "failed to setup backup battery charging\n"); + goto out; + } + } + + /* Enable backup battery charging */ + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, + RTC_BUP_CH_ENA, RTC_BUP_CH_ENA); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + + if (is_ab8540(di->parent)) { + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_MODE_REG, + BUS_VSYS_VOL_SELECT_MASK, BUS_VSYS_VOL_SELECT_3P6V); + if (ret) { + dev_err(di->dev, + "failed to setup usb power path vsys voltage\n"); + goto out; + } + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_CHR_REG, + BUS_PP_PRECHG_CURRENT_MASK, 0); + if (ret) { + dev_err(di->dev, + "failed to setup usb power path prechage current\n"); + goto out; + } + } + +out: + return ret; +} + +/* + * ab8500 charger driver interrupts and their respective isr + */ +static struct ab8500_charger_interrupts ab8500_charger_irq[] = { + {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler}, + {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler}, + {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler}, + {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler}, + {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler}, + {"VBUS_DET_F", ab8500_charger_vbusdetf_handler}, + {"VBUS_DET_R", ab8500_charger_vbusdetr_handler}, + {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler}, + {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler}, + {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler}, + {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler}, + {"VBUS_OVV", ab8500_charger_vbusovv_handler}, + {"CH_WD_EXP", ab8500_charger_chwdexp_handler}, + {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler}, +}; + +static int ab8500_charger_usb_notifier_call(struct notifier_block *nb, + unsigned long event, void *power) +{ + struct ab8500_charger *di = + container_of(nb, struct ab8500_charger, nb); + enum ab8500_usb_state bm_usb_state; + unsigned mA = *((unsigned *)power); + + if (!di) + return NOTIFY_DONE; + + if (event != USB_EVENT_VBUS) { + dev_dbg(di->dev, "not a standard host, returning\n"); + return NOTIFY_DONE; + } + + /* TODO: State is fabricate here. See if charger really needs USB + * state or if mA is enough + */ + if ((di->usb_state.usb_current == 2) && (mA > 2)) + bm_usb_state = AB8500_BM_USB_STATE_RESUME; + else if (mA == 0) + bm_usb_state = AB8500_BM_USB_STATE_RESET_HS; + else if (mA == 2) + bm_usb_state = AB8500_BM_USB_STATE_SUSPEND; + else if (mA >= 8) /* 8, 100, 500 */ + bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED; + else /* Should never occur */ + bm_usb_state = AB8500_BM_USB_STATE_RESET_FS; + + dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n", + __func__, bm_usb_state, mA); + + spin_lock(&di->usb_state.usb_lock); + di->usb_state.state_tmp = bm_usb_state; + di->usb_state.usb_current_tmp = mA; + spin_unlock(&di->usb_state.usb_lock); + + /* + * wait for some time until you get updates from the usb stack + * and negotiations are completed + */ + queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2); + + return NOTIFY_OK; +} + +#if defined(CONFIG_PM) +static int ab8500_charger_resume(struct platform_device *pdev) +{ + int ret; + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CHARG_WD_CTRL, CHARG_WD_KICK); + if (ret) + dev_err(di->dev, "Failed to kick WD!\n"); + + /* If not already pending start a new timer */ + queue_delayed_work(di->charger_wq, &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); + } + + /* If we still have a HW failure, schedule a new check */ + if (di->flags.mainextchnotok || di->flags.vbus_ovv) { + queue_delayed_work(di->charger_wq, + &di->check_hw_failure_work, 0); + } + + if (di->flags.vbus_drop_end) + queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0); + + return 0; +} + +static int ab8500_charger_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + + /* Cancel any pending jobs */ + cancel_delayed_work(&di->check_hw_failure_work); + cancel_delayed_work(&di->vbus_drop_end_work); + + flush_delayed_work(&di->attach_work); + flush_delayed_work(&di->usb_charger_attached_work); + flush_delayed_work(&di->ac_charger_attached_work); + flush_delayed_work(&di->check_usbchgnotok_work); + flush_delayed_work(&di->check_vbat_work); + flush_delayed_work(&di->kick_wd_work); + + flush_work(&di->usb_link_status_work); + flush_work(&di->ac_work); + flush_work(&di->detect_usb_type_work); + + if (atomic_read(&di->current_stepping_sessions)) + return -EAGAIN; + + return 0; +} +#else +#define ab8500_charger_suspend NULL +#define ab8500_charger_resume NULL +#endif + +static struct notifier_block charger_nb = { + .notifier_call = ab8500_external_charger_prepare, +}; + +static int ab8500_charger_remove(struct platform_device *pdev) +{ + struct ab8500_charger *di = platform_get_drvdata(pdev); + int i, irq, ret; + + /* Disable AC charging */ + ab8500_charger_ac_en(&di->ac_chg, false, 0, 0); + + /* Disable USB charging */ + ab8500_charger_usb_en(&di->usb_chg, false, 0, 0); + + /* Disable interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } + + /* Backup battery voltage and current disable */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0); + if (ret < 0) + dev_err(di->dev, "%s mask and set failed\n", __func__); + + usb_unregister_notifier(di->usb_phy, &di->nb); + usb_put_phy(di->usb_phy); + + /* Delete the work queue */ + destroy_workqueue(di->charger_wq); + + /* Unregister external charger enable notifier */ + if (!di->ac_chg.enabled) + blocking_notifier_chain_unregister( + &charger_notifier_list, &charger_nb); + + flush_scheduled_work(); + if (di->usb_chg.enabled) + power_supply_unregister(di->usb_chg.psy); + + if (di->ac_chg.enabled && !di->ac_chg.external) + power_supply_unregister(di->ac_chg.psy); + + return 0; +} + +static char *supply_interface[] = { + "ab8500_chargalg", + "ab8500_fg", + "ab8500_btemp", +}; + +static const struct power_supply_desc ab8500_ac_chg_desc = { + .name = "ab8500_ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = ab8500_charger_ac_props, + .num_properties = ARRAY_SIZE(ab8500_charger_ac_props), + .get_property = ab8500_charger_ac_get_property, +}; + +static const struct power_supply_desc ab8500_usb_chg_desc = { + .name = "ab8500_usb", + .type = POWER_SUPPLY_TYPE_USB, + .properties = ab8500_charger_usb_props, + .num_properties = ARRAY_SIZE(ab8500_charger_usb_props), + .get_property = ab8500_charger_usb_get_property, +}; + +static int ab8500_charger_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct abx500_bm_data *plat = pdev->dev.platform_data; + struct power_supply_config ac_psy_cfg = {}, usb_psy_cfg = {}; + struct ab8500_charger *di; + int irq, i, charger_status, ret = 0, ch_stat; + + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); + if (!di) { + dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__); + return -ENOMEM; + } + + if (!plat) { + dev_err(&pdev->dev, "no battery management data supplied\n"); + return -EINVAL; + } + di->bm = plat; + + if (np) { + ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm); + if (ret) { + dev_err(&pdev->dev, "failed to get battery information\n"); + return ret; + } + di->autopower_cfg = of_property_read_bool(np, "autopower_cfg"); + } else + di->autopower_cfg = false; + + /* get parent data */ + di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); + di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + + /* initialize lock */ + spin_lock_init(&di->usb_state.usb_lock); + mutex_init(&di->usb_ipt_crnt_lock); + + di->autopower = false; + di->invalid_charger_detect_state = 0; + + /* AC and USB supply config */ + ac_psy_cfg.supplied_to = supply_interface; + ac_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface); + ac_psy_cfg.drv_data = &di->ac_chg; + usb_psy_cfg.supplied_to = supply_interface; + usb_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface); + usb_psy_cfg.drv_data = &di->usb_chg; + + /* AC supply */ + /* ux500_charger sub-class */ + di->ac_chg.ops.enable = &ab8500_charger_ac_en; + di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable; + di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->ac_chg.max_out_curr = + di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; + di->ac_chg.wdt_refresh = CHG_WD_INTERVAL; + di->ac_chg.enabled = di->bm->ac_enabled; + di->ac_chg.external = false; + + /*notifier for external charger enabling*/ + if (!di->ac_chg.enabled) + blocking_notifier_chain_register( + &charger_notifier_list, &charger_nb); + + /* USB supply */ + /* ux500_charger sub-class */ + di->usb_chg.ops.enable = &ab8500_charger_usb_en; + di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable; + di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; + di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->usb_chg.ops.pp_enable = &ab8540_charger_power_path_enable; + di->usb_chg.ops.pre_chg_enable = &ab8540_charger_usb_pre_chg_enable; + di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ + ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; + di->usb_chg.max_out_curr = + di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; + di->usb_chg.wdt_refresh = CHG_WD_INTERVAL; + di->usb_chg.enabled = di->bm->usb_enabled; + di->usb_chg.external = false; + di->usb_chg.power_path = di->bm->usb_power_path; + di->usb_state.usb_current = -1; + + /* Create a work queue for the charger */ + di->charger_wq = + create_singlethread_workqueue("ab8500_charger_wq"); + if (di->charger_wq == NULL) { + dev_err(di->dev, "failed to create work queue\n"); + return -ENOMEM; + } + + mutex_init(&di->charger_attached_mutex); + + /* Init work for HW failure check */ + INIT_DEFERRABLE_WORK(&di->check_hw_failure_work, + ab8500_charger_check_hw_failure_work); + INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work, + ab8500_charger_check_usbchargernotok_work); + + INIT_DELAYED_WORK(&di->ac_charger_attached_work, + ab8500_charger_ac_attached_work); + INIT_DELAYED_WORK(&di->usb_charger_attached_work, + ab8500_charger_usb_attached_work); + + /* + * For ABB revision 1.0 and 1.1 there is a bug in the watchdog + * logic. That means we have to continously kick the charger + * watchdog even when no charger is connected. This is only + * valid once the AC charger has been enabled. This is + * a bug that is not handled by the algorithm and the + * watchdog have to be kicked by the charger driver + * when the AC charger is disabled + */ + INIT_DEFERRABLE_WORK(&di->kick_wd_work, + ab8500_charger_kick_watchdog_work); + + INIT_DEFERRABLE_WORK(&di->check_vbat_work, + ab8500_charger_check_vbat_work); + + INIT_DELAYED_WORK(&di->attach_work, + ab8500_charger_usb_link_attach_work); + + INIT_DELAYED_WORK(&di->usb_state_changed_work, + ab8500_charger_usb_state_changed_work); + + INIT_DELAYED_WORK(&di->vbus_drop_end_work, + ab8500_charger_vbus_drop_end_work); + + /* Init work for charger detection */ + INIT_WORK(&di->usb_link_status_work, + ab8500_charger_usb_link_status_work); + INIT_WORK(&di->ac_work, ab8500_charger_ac_work); + INIT_WORK(&di->detect_usb_type_work, + ab8500_charger_detect_usb_type_work); + + /* Init work for checking HW status */ + INIT_WORK(&di->check_main_thermal_prot_work, + ab8500_charger_check_main_thermal_prot_work); + INIT_WORK(&di->check_usb_thermal_prot_work, + ab8500_charger_check_usb_thermal_prot_work); + + /* + * VDD ADC supply needs to be enabled from this driver when there + * is a charger connected to avoid erroneous BTEMP_HIGH/LOW + * interrupts during charging + */ + di->regu = devm_regulator_get(di->dev, "vddadc"); + if (IS_ERR(di->regu)) { + ret = PTR_ERR(di->regu); + dev_err(di->dev, "failed to get vddadc regulator\n"); + goto free_charger_wq; + } + + + /* Initialize OVV, and other registers */ + ret = ab8500_charger_init_hw_registers(di); + if (ret) { + dev_err(di->dev, "failed to initialize ABB registers\n"); + goto free_charger_wq; + } + + /* Register AC charger class */ + if (di->ac_chg.enabled) { + di->ac_chg.psy = power_supply_register(di->dev, + &ab8500_ac_chg_desc, + &ac_psy_cfg); + if (IS_ERR(di->ac_chg.psy)) { + dev_err(di->dev, "failed to register AC charger\n"); + ret = PTR_ERR(di->ac_chg.psy); + goto free_charger_wq; + } + } + + /* Register USB charger class */ + if (di->usb_chg.enabled) { + di->usb_chg.psy = power_supply_register(di->dev, + &ab8500_usb_chg_desc, + &usb_psy_cfg); + if (IS_ERR(di->usb_chg.psy)) { + dev_err(di->dev, "failed to register USB charger\n"); + ret = PTR_ERR(di->usb_chg.psy); + goto free_ac; + } + } + + di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(di->usb_phy)) { + dev_err(di->dev, "failed to get usb transceiver\n"); + ret = -EINVAL; + goto free_usb; + } + di->nb.notifier_call = ab8500_charger_usb_notifier_call; + ret = usb_register_notifier(di->usb_phy, &di->nb); + if (ret) { + dev_err(di->dev, "failed to register usb notifier\n"); + goto put_usb_phy; + } + + /* Identify the connected charger types during startup */ + charger_status = ab8500_charger_detect_chargers(di, true); + if (charger_status & AC_PW_CONN) { + di->ac.charger_connected = 1; + di->ac_conn = true; + ab8500_power_supply_changed(di, di->ac_chg.psy); + sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present"); + } + + if (charger_status & USB_PW_CONN) { + di->vbus_detected = true; + di->vbus_detected_start = true; + queue_work(di->charger_wq, + &di->detect_usb_type_work); + } + + /* Register interrupts */ + for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr, + IRQF_SHARED | IRQF_NO_SUSPEND, + ab8500_charger_irq[i].name, di); + + if (ret != 0) { + dev_err(di->dev, "failed to request %s IRQ %d: %d\n" + , ab8500_charger_irq[i].name, irq, ret); + goto free_irq; + } + dev_dbg(di->dev, "Requested %s IRQ %d: %d\n", + ab8500_charger_irq[i].name, irq, ret); + } + + platform_set_drvdata(pdev, di); + + mutex_lock(&di->charger_attached_mutex); + + ch_stat = ab8500_charger_detect_chargers(di, false); + + if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); + } + if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) { + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); + } + + mutex_unlock(&di->charger_attached_mutex); + + return ret; + +free_irq: + usb_unregister_notifier(di->usb_phy, &di->nb); + + /* We also have to free all successfully registered irqs */ + for (i = i - 1; i >= 0; i--) { + irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name); + free_irq(irq, di); + } +put_usb_phy: + usb_put_phy(di->usb_phy); +free_usb: + if (di->usb_chg.enabled) + power_supply_unregister(di->usb_chg.psy); +free_ac: + if (di->ac_chg.enabled) + power_supply_unregister(di->ac_chg.psy); +free_charger_wq: + destroy_workqueue(di->charger_wq); + return ret; +} + +static const struct of_device_id ab8500_charger_match[] = { + { .compatible = "stericsson,ab8500-charger", }, + { }, +}; + +static struct platform_driver ab8500_charger_driver = { + .probe = ab8500_charger_probe, + .remove = ab8500_charger_remove, + .suspend = ab8500_charger_suspend, + .resume = ab8500_charger_resume, + .driver = { + .name = "ab8500-charger", + .of_match_table = ab8500_charger_match, + }, +}; + +static int __init ab8500_charger_init(void) +{ + return platform_driver_register(&ab8500_charger_driver); +} + +static void __exit ab8500_charger_exit(void) +{ + platform_driver_unregister(&ab8500_charger_driver); +} + +subsys_initcall_sync(ab8500_charger_init); +module_exit(ab8500_charger_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy"); +MODULE_ALIAS("platform:ab8500-charger"); +MODULE_DESCRIPTION("AB8500 charger management driver"); -- cgit v1.2.3-54-g00ecf