From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/power/reset/Kconfig | 170 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 drivers/power/reset/Kconfig (limited to 'drivers/power/reset/Kconfig') diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig new file mode 100644 index 000000000..17d93a73c --- /dev/null +++ b/drivers/power/reset/Kconfig @@ -0,0 +1,170 @@ +menuconfig POWER_RESET + bool "Board level reset or power off" + help + Provides a number of drivers which either reset a complete board + or shut it down, by manipulating the main power supply on the board. + + Say Y here to enable board reset and power off + +if POWER_RESET + +config POWER_RESET_AS3722 + bool "ams AS3722 power-off driver" + depends on MFD_AS3722 + help + This driver supports turning off board via a ams AS3722 power-off. + +config POWER_RESET_AT91_POWEROFF + bool "Atmel AT91 poweroff driver" + depends on ARCH_AT91 + default SOC_AT91SAM9 || SOC_SAMA5 + help + This driver supports poweroff for Atmel AT91SAM9 and SAMA5 + SoCs + +config POWER_RESET_AT91_RESET + bool "Atmel AT91 reset driver" + depends on ARCH_AT91 + default SOC_AT91SAM9 || SOC_SAMA5 + help + This driver supports restart for Atmel AT91SAM9 and SAMA5 + SoCs + +config POWER_RESET_AXXIA + bool "LSI Axxia reset driver" + depends on ARCH_AXXIA + help + This driver supports restart for Axxia SoC. + + Say Y if you have an Axxia family SoC. + +config POWER_RESET_BRCMSTB + bool "Broadcom STB reset driver" + depends on ARM || MIPS || COMPILE_TEST + depends on MFD_SYSCON + default ARCH_BRCMSTB + help + This driver provides restart support for Broadcom STB boards. + + Say Y here if you have a Broadcom STB board and you wish + to have restart support. + +config POWER_RESET_GPIO + bool "GPIO power-off driver" + depends on OF_GPIO + help + This driver supports turning off your board via a GPIO line. + If your board needs a GPIO high/low to power down, say Y and + create a binding in your devicetree. + +config POWER_RESET_GPIO_RESTART + bool "GPIO restart driver" + depends on OF_GPIO + help + This driver supports restarting your board via a GPIO line. + If your board needs a GPIO high/low to restart, say Y and + create a binding in your devicetree. + +config POWER_RESET_HISI + bool "Hisilicon power-off driver" + depends on ARCH_HISI + help + Reboot support for Hisilicon boards. + +config POWER_RESET_IMX + bool "IMX6 power-off driver" + depends on POWER_RESET && SOC_IMX6 + help + This driver support power off external PMIC by PMIC_ON_REQ on i.mx6 + boards.If you want to use other pin to control external power,please + say N here or disable in dts to make sure pm_power_off never be + overwrote wrongly by this driver. + +config POWER_RESET_MSM + bool "Qualcomm MSM power-off driver" + depends on ARCH_QCOM + help + Power off and restart support for Qualcomm boards. + +config POWER_RESET_LTC2952 + bool "LTC2952 PowerPath power-off driver" + depends on OF_GPIO + help + This driver supports an external powerdown trigger and board power + down via the LTC2952. Bindings are made in the device tree. + +config POWER_RESET_QNAP + bool "QNAP power-off driver" + depends on OF_GPIO && PLAT_ORION + help + This driver supports turning off QNAP NAS devices by sending + commands to the microcontroller which controls the main power. + + Say Y if you have a QNAP NAS. + +config POWER_RESET_RESTART + bool "Restart power-off driver" + help + Some boards don't actually have the ability to power off. + Instead they restart, and u-boot holds the SoC until the + user presses a key. u-boot then boots into Linux. + +config POWER_RESET_ST + bool "ST restart driver" + depends on ARCH_STI + help + Reset support for STMicroelectronics boards. + +config POWER_RESET_VERSATILE + bool "ARM Versatile family reboot driver" + depends on ARM + depends on MFD_SYSCON + depends on OF + help + Power off and restart support for ARM Versatile family of + reference boards. + +config POWER_RESET_VEXPRESS + bool "ARM Versatile Express power-off and reset driver" + depends on ARM || ARM64 + depends on VEXPRESS_CONFIG + help + Power off and reset support for the ARM Ltd. Versatile + Express boards. + +config POWER_RESET_XGENE + bool "APM SoC X-Gene reset driver" + depends on ARM64 + help + Reboot support for the APM SoC X-Gene Eval boards. + +config POWER_RESET_KEYSTONE + bool "Keystone reset driver" + depends on ARCH_KEYSTONE + select MFD_SYSCON + help + Reboot support for the KEYSTONE SoCs. + +config POWER_RESET_SYSCON + bool "Generic SYSCON regmap reset driver" + depends on OF + select MFD_SYSCON + help + Reboot support for generic SYSCON mapped register reset. + +config POWER_RESET_SYSCON_POWEROFF + bool "Generic SYSCON regmap poweroff driver" + depends on OF + select MFD_SYSCON + help + Poweroff support for generic SYSCON mapped register poweroff. + +config POWER_RESET_RMOBILE + tristate "Renesas R-Mobile reset driver" + depends on ARCH_RMOBILE || COMPILE_TEST + depends on HAS_IOMEM + help + Reboot support for Renesas R-Mobile and SH-Mobile SoCs. + +endif + -- cgit v1.2.3-54-g00ecf