From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 drivers/remoteproc/Kconfig | 67 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 drivers/remoteproc/Kconfig

(limited to 'drivers/remoteproc/Kconfig')

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
new file mode 100644
index 000000000..5e343bab9
--- /dev/null
+++ b/drivers/remoteproc/Kconfig
@@ -0,0 +1,67 @@
+menu "Remoteproc drivers"
+
+# REMOTEPROC gets selected by whoever wants it
+config REMOTEPROC
+	tristate
+	depends on HAS_DMA
+	select CRC32
+	select FW_LOADER
+	select VIRTIO
+	select VIRTUALIZATION
+
+config OMAP_REMOTEPROC
+	tristate "OMAP remoteproc support"
+	depends on HAS_DMA
+	depends on ARCH_OMAP4 || SOC_OMAP5
+	depends on OMAP_IOMMU
+	select REMOTEPROC
+	select MAILBOX
+	select OMAP2PLUS_MBOX
+	select RPMSG
+	help
+	  Say y here to support OMAP's remote processors (dual M3
+	  and DSP on OMAP4) via the remote processor framework.
+
+	  Currently only supported on OMAP4.
+
+	  Usually you want to say y here, in order to enable multimedia
+	  use-cases to run on your platform (multimedia codecs are
+	  offloaded to remote DSP processors using this framework).
+
+	  It's safe to say n here if you're not interested in multimedia
+	  offloading or just want a bare minimum kernel.
+
+config STE_MODEM_RPROC
+	tristate "STE-Modem remoteproc support"
+	depends on HAS_DMA
+	select REMOTEPROC
+	default n
+	help
+	  Say y or m here to support STE-Modem shared memory driver.
+	  This can be either built-in or a loadable module.
+	  If unsure say N.
+
+config DA8XX_REMOTEPROC
+	tristate "DA8xx/OMAP-L13x remoteproc support"
+	depends on ARCH_DAVINCI_DA8XX
+	select CMA if MMU
+	select REMOTEPROC
+	select RPMSG
+	help
+	  Say y here to support DA8xx/OMAP-L13x remote processors via the
+	  remote processor framework.
+
+	  You want to say y here in order to enable AMP
+	  use-cases to run on your platform (multimedia codecs are
+	  offloaded to remote DSP processors using this framework).
+
+	  This module controls the name of the firmware file that gets
+	  loaded on the DSP.  This file must reside in the /lib/firmware
+	  directory.  It can be specified via the module parameter
+	  da8xx_fw_name=<filename>, and if not specified will default to
+	  "rproc-dsp-fw".
+
+	  It's safe to say n here if you're not interested in multimedia
+	  offloading.
+
+endmenu
-- 
cgit v1.2.3-54-g00ecf