From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/remoteproc/Kconfig | 67 ++ drivers/remoteproc/Makefile | 12 + drivers/remoteproc/da8xx_remoteproc.c | 310 ++++++ drivers/remoteproc/omap_remoteproc.c | 242 +++++ drivers/remoteproc/omap_remoteproc.h | 69 ++ drivers/remoteproc/remoteproc_core.c | 1419 ++++++++++++++++++++++++++++ drivers/remoteproc/remoteproc_debugfs.c | 252 +++++ drivers/remoteproc/remoteproc_elf_loader.c | 337 +++++++ drivers/remoteproc/remoteproc_internal.h | 120 +++ drivers/remoteproc/remoteproc_virtio.c | 363 +++++++ drivers/remoteproc/ste_modem_rproc.c | 342 +++++++ 11 files changed, 3533 insertions(+) create mode 100644 drivers/remoteproc/Kconfig create mode 100644 drivers/remoteproc/Makefile create mode 100644 drivers/remoteproc/da8xx_remoteproc.c create mode 100644 drivers/remoteproc/omap_remoteproc.c create mode 100644 drivers/remoteproc/omap_remoteproc.h create mode 100644 drivers/remoteproc/remoteproc_core.c create mode 100644 drivers/remoteproc/remoteproc_debugfs.c create mode 100644 drivers/remoteproc/remoteproc_elf_loader.c create mode 100644 drivers/remoteproc/remoteproc_internal.h create mode 100644 drivers/remoteproc/remoteproc_virtio.c create mode 100644 drivers/remoteproc/ste_modem_rproc.c (limited to 'drivers/remoteproc') diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig new file mode 100644 index 000000000..5e343bab9 --- /dev/null +++ b/drivers/remoteproc/Kconfig @@ -0,0 +1,67 @@ +menu "Remoteproc drivers" + +# REMOTEPROC gets selected by whoever wants it +config REMOTEPROC + tristate + depends on HAS_DMA + select CRC32 + select FW_LOADER + select VIRTIO + select VIRTUALIZATION + +config OMAP_REMOTEPROC + tristate "OMAP remoteproc support" + depends on HAS_DMA + depends on ARCH_OMAP4 || SOC_OMAP5 + depends on OMAP_IOMMU + select REMOTEPROC + select MAILBOX + select OMAP2PLUS_MBOX + select RPMSG + help + Say y here to support OMAP's remote processors (dual M3 + and DSP on OMAP4) via the remote processor framework. + + Currently only supported on OMAP4. + + Usually you want to say y here, in order to enable multimedia + use-cases to run on your platform (multimedia codecs are + offloaded to remote DSP processors using this framework). + + It's safe to say n here if you're not interested in multimedia + offloading or just want a bare minimum kernel. + +config STE_MODEM_RPROC + tristate "STE-Modem remoteproc support" + depends on HAS_DMA + select REMOTEPROC + default n + help + Say y or m here to support STE-Modem shared memory driver. + This can be either built-in or a loadable module. + If unsure say N. + +config DA8XX_REMOTEPROC + tristate "DA8xx/OMAP-L13x remoteproc support" + depends on ARCH_DAVINCI_DA8XX + select CMA if MMU + select REMOTEPROC + select RPMSG + help + Say y here to support DA8xx/OMAP-L13x remote processors via the + remote processor framework. + + You want to say y here in order to enable AMP + use-cases to run on your platform (multimedia codecs are + offloaded to remote DSP processors using this framework). + + This module controls the name of the firmware file that gets + loaded on the DSP. This file must reside in the /lib/firmware + directory. It can be specified via the module parameter + da8xx_fw_name=, and if not specified will default to + "rproc-dsp-fw". + + It's safe to say n here if you're not interested in multimedia + offloading. + +endmenu diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile new file mode 100644 index 000000000..ac2ff7568 --- /dev/null +++ b/drivers/remoteproc/Makefile @@ -0,0 +1,12 @@ +# +# Generic framework for controlling remote processors +# + +obj-$(CONFIG_REMOTEPROC) += remoteproc.o +remoteproc-y := remoteproc_core.o +remoteproc-y += remoteproc_debugfs.o +remoteproc-y += remoteproc_virtio.o +remoteproc-y += remoteproc_elf_loader.o +obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o +obj-$(CONFIG_STE_MODEM_RPROC) += ste_modem_rproc.o +obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c new file mode 100644 index 000000000..f8d6a0661 --- /dev/null +++ b/drivers/remoteproc/da8xx_remoteproc.c @@ -0,0 +1,310 @@ +/* + * Remote processor machine-specific module for DA8XX + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include /* for davinci_clk_reset_assert/deassert() */ + +#include "remoteproc_internal.h" + +static char *da8xx_fw_name; +module_param(da8xx_fw_name, charp, S_IRUGO); +MODULE_PARM_DESC(da8xx_fw_name, + "\n\t\tName of DSP firmware file in /lib/firmware" + " (if not specified defaults to 'rproc-dsp-fw')"); + +/* + * OMAP-L138 Technical References: + * http://www.ti.com/product/omap-l138 + */ +#define SYSCFG_CHIPSIG0 BIT(0) +#define SYSCFG_CHIPSIG1 BIT(1) +#define SYSCFG_CHIPSIG2 BIT(2) +#define SYSCFG_CHIPSIG3 BIT(3) +#define SYSCFG_CHIPSIG4 BIT(4) + +/** + * struct da8xx_rproc - da8xx remote processor instance state + * @rproc: rproc handle + * @dsp_clk: placeholder for platform's DSP clk + * @ack_fxn: chip-specific ack function for ack'ing irq + * @irq_data: ack_fxn function parameter + * @chipsig: virt ptr to DSP interrupt registers (CHIPSIG & CHIPSIG_CLR) + * @bootreg: virt ptr to DSP boot address register (HOST1CFG) + * @irq: irq # used by this instance + */ +struct da8xx_rproc { + struct rproc *rproc; + struct clk *dsp_clk; + void (*ack_fxn)(struct irq_data *data); + struct irq_data *irq_data; + void __iomem *chipsig; + void __iomem *bootreg; + int irq; +}; + +/** + * handle_event() - inbound virtqueue message workqueue function + * + * This function is registered as a kernel thread and is scheduled by the + * kernel handler. + */ +static irqreturn_t handle_event(int irq, void *p) +{ + struct rproc *rproc = (struct rproc *)p; + + /* Process incoming buffers on all our vrings */ + rproc_vq_interrupt(rproc, 0); + rproc_vq_interrupt(rproc, 1); + + return IRQ_HANDLED; +} + +/** + * da8xx_rproc_callback() - inbound virtqueue message handler + * + * This handler is invoked directly by the kernel whenever the remote + * core (DSP) has modified the state of a virtqueue. There is no + * "payload" message indicating the virtqueue index as is the case with + * mailbox-based implementations on OMAP4. As such, this handler "polls" + * each known virtqueue index for every invocation. + */ +static irqreturn_t da8xx_rproc_callback(int irq, void *p) +{ + struct rproc *rproc = (struct rproc *)p; + struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; + u32 chipsig; + + chipsig = readl(drproc->chipsig); + if (chipsig & SYSCFG_CHIPSIG0) { + /* Clear interrupt level source */ + writel(SYSCFG_CHIPSIG0, drproc->chipsig + 4); + + /* + * ACK intr to AINTC. + * + * It has already been ack'ed by the kernel before calling + * this function, but since the ARM<->DSP interrupts in the + * CHIPSIG register are "level" instead of "pulse" variety, + * we need to ack it after taking down the level else we'll + * be called again immediately after returning. + */ + drproc->ack_fxn(drproc->irq_data); + + return IRQ_WAKE_THREAD; + } + + return IRQ_HANDLED; +} + +static int da8xx_rproc_start(struct rproc *rproc) +{ + struct device *dev = rproc->dev.parent; + struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; + struct clk *dsp_clk = drproc->dsp_clk; + + /* hw requires the start (boot) address be on 1KB boundary */ + if (rproc->bootaddr & 0x3ff) { + dev_err(dev, "invalid boot address: must be aligned to 1KB\n"); + + return -EINVAL; + } + + writel(rproc->bootaddr, drproc->bootreg); + + clk_enable(dsp_clk); + davinci_clk_reset_deassert(dsp_clk); + + return 0; +} + +static int da8xx_rproc_stop(struct rproc *rproc) +{ + struct da8xx_rproc *drproc = rproc->priv; + + clk_disable(drproc->dsp_clk); + + return 0; +} + +/* kick a virtqueue */ +static void da8xx_rproc_kick(struct rproc *rproc, int vqid) +{ + struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; + + /* Interupt remote proc */ + writel(SYSCFG_CHIPSIG2, drproc->chipsig); +} + +static struct rproc_ops da8xx_rproc_ops = { + .start = da8xx_rproc_start, + .stop = da8xx_rproc_stop, + .kick = da8xx_rproc_kick, +}; + +static int reset_assert(struct device *dev) +{ + struct clk *dsp_clk; + + dsp_clk = clk_get(dev, NULL); + if (IS_ERR(dsp_clk)) { + dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk)); + return PTR_ERR(dsp_clk); + } + + davinci_clk_reset_assert(dsp_clk); + clk_put(dsp_clk); + + return 0; +} + +static int da8xx_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct da8xx_rproc *drproc; + struct rproc *rproc; + struct irq_data *irq_data; + struct resource *bootreg_res; + struct resource *chipsig_res; + struct clk *dsp_clk; + void __iomem *chipsig; + void __iomem *bootreg; + int irq; + int ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "platform_get_irq(pdev, 0) error: %d\n", irq); + return irq; + } + + irq_data = irq_get_irq_data(irq); + if (!irq_data) { + dev_err(dev, "irq_get_irq_data(%d): NULL\n", irq); + return -EINVAL; + } + + bootreg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bootreg = devm_ioremap_resource(dev, bootreg_res); + if (IS_ERR(bootreg)) + return PTR_ERR(bootreg); + + chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + chipsig = devm_ioremap_resource(dev, chipsig_res); + if (IS_ERR(chipsig)) + return PTR_ERR(chipsig); + + dsp_clk = devm_clk_get(dev, NULL); + if (IS_ERR(dsp_clk)) { + dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk)); + + return PTR_ERR(dsp_clk); + } + + rproc = rproc_alloc(dev, "dsp", &da8xx_rproc_ops, da8xx_fw_name, + sizeof(*drproc)); + if (!rproc) + return -ENOMEM; + + drproc = rproc->priv; + drproc->rproc = rproc; + rproc->has_iommu = false; + + platform_set_drvdata(pdev, rproc); + + /* everything the ISR needs is now setup, so hook it up */ + ret = devm_request_threaded_irq(dev, irq, da8xx_rproc_callback, + handle_event, 0, "da8xx-remoteproc", + rproc); + if (ret) { + dev_err(dev, "devm_request_threaded_irq error: %d\n", ret); + goto free_rproc; + } + + /* + * rproc_add() can end up enabling the DSP's clk with the DSP + * *not* in reset, but da8xx_rproc_start() needs the DSP to be + * held in reset at the time it is called. + */ + ret = reset_assert(dev); + if (ret) + goto free_rproc; + + drproc->chipsig = chipsig; + drproc->bootreg = bootreg; + drproc->ack_fxn = irq_data->chip->irq_ack; + drproc->irq_data = irq_data; + drproc->irq = irq; + drproc->dsp_clk = dsp_clk; + + ret = rproc_add(rproc); + if (ret) { + dev_err(dev, "rproc_add failed: %d\n", ret); + goto free_rproc; + } + + return 0; + +free_rproc: + rproc_put(rproc); + + return ret; +} + +static int da8xx_rproc_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rproc *rproc = platform_get_drvdata(pdev); + struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv; + + /* + * It's important to place the DSP in reset before going away, + * since a subsequent insmod of this module may enable the DSP's + * clock before its program/boot-address has been loaded and + * before this module's probe has had a chance to reset the DSP. + * Without the reset, the DSP can lockup permanently when it + * begins executing garbage. + */ + reset_assert(dev); + + /* + * The devm subsystem might end up releasing things before + * freeing the irq, thus allowing an interrupt to sneak in while + * the device is being removed. This should prevent that. + */ + disable_irq(drproc->irq); + + rproc_del(rproc); + rproc_put(rproc); + + return 0; +} + +static struct platform_driver da8xx_rproc_driver = { + .probe = da8xx_rproc_probe, + .remove = da8xx_rproc_remove, + .driver = { + .name = "davinci-rproc", + }, +}; + +module_platform_driver(da8xx_rproc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DA8XX Remote Processor control driver"); diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c new file mode 100644 index 000000000..b74368a91 --- /dev/null +++ b/drivers/remoteproc/omap_remoteproc.c @@ -0,0 +1,242 @@ +/* + * OMAP Remote Processor driver + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen + * Brian Swetland + * Fernando Guzman Lugo + * Mark Grosen + * Suman Anna + * Hari Kanigeri + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "omap_remoteproc.h" +#include "remoteproc_internal.h" + +/** + * struct omap_rproc - omap remote processor state + * @mbox: mailbox channel handle + * @client: mailbox client to request the mailbox channel + * @rproc: rproc handle + */ +struct omap_rproc { + struct mbox_chan *mbox; + struct mbox_client client; + struct rproc *rproc; +}; + +/** + * omap_rproc_mbox_callback() - inbound mailbox message handler + * @client: mailbox client pointer used for requesting the mailbox channel + * @data: mailbox payload + * + * This handler is invoked by omap's mailbox driver whenever a mailbox + * message is received. Usually, the mailbox payload simply contains + * the index of the virtqueue that is kicked by the remote processor, + * and we let remoteproc core handle it. + * + * In addition to virtqueue indices, we also have some out-of-band values + * that indicates different events. Those values are deliberately very + * big so they don't coincide with virtqueue indices. + */ +static void omap_rproc_mbox_callback(struct mbox_client *client, void *data) +{ + struct omap_rproc *oproc = container_of(client, struct omap_rproc, + client); + struct device *dev = oproc->rproc->dev.parent; + const char *name = oproc->rproc->name; + u32 msg = (u32)data; + + dev_dbg(dev, "mbox msg: 0x%x\n", msg); + + switch (msg) { + case RP_MBOX_CRASH: + /* just log this for now. later, we'll also do recovery */ + dev_err(dev, "omap rproc %s crashed\n", name); + break; + case RP_MBOX_ECHO_REPLY: + dev_info(dev, "received echo reply from %s\n", name); + break; + default: + /* msg contains the index of the triggered vring */ + if (rproc_vq_interrupt(oproc->rproc, msg) == IRQ_NONE) + dev_dbg(dev, "no message was found in vqid %d\n", msg); + } +} + +/* kick a virtqueue */ +static void omap_rproc_kick(struct rproc *rproc, int vqid) +{ + struct omap_rproc *oproc = rproc->priv; + struct device *dev = rproc->dev.parent; + int ret; + + /* send the index of the triggered virtqueue in the mailbox payload */ + ret = mbox_send_message(oproc->mbox, (void *)vqid); + if (ret < 0) + dev_err(dev, "omap_mbox_msg_send failed: %d\n", ret); +} + +/* + * Power up the remote processor. + * + * This function will be invoked only after the firmware for this rproc + * was loaded, parsed successfully, and all of its resource requirements + * were met. + */ +static int omap_rproc_start(struct rproc *rproc) +{ + struct omap_rproc *oproc = rproc->priv; + struct device *dev = rproc->dev.parent; + struct platform_device *pdev = to_platform_device(dev); + struct omap_rproc_pdata *pdata = pdev->dev.platform_data; + int ret; + struct mbox_client *client = &oproc->client; + + if (pdata->set_bootaddr) + pdata->set_bootaddr(rproc->bootaddr); + + client->dev = dev; + client->tx_done = NULL; + client->rx_callback = omap_rproc_mbox_callback; + client->tx_block = false; + client->knows_txdone = false; + + oproc->mbox = omap_mbox_request_channel(client, pdata->mbox_name); + if (IS_ERR(oproc->mbox)) { + ret = -EBUSY; + dev_err(dev, "mbox_request_channel failed: %ld\n", + PTR_ERR(oproc->mbox)); + return ret; + } + + /* + * Ping the remote processor. this is only for sanity-sake; + * there is no functional effect whatsoever. + * + * Note that the reply will _not_ arrive immediately: this message + * will wait in the mailbox fifo until the remote processor is booted. + */ + ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); + if (ret < 0) { + dev_err(dev, "mbox_send_message failed: %d\n", ret); + goto put_mbox; + } + + ret = pdata->device_enable(pdev); + if (ret) { + dev_err(dev, "omap_device_enable failed: %d\n", ret); + goto put_mbox; + } + + return 0; + +put_mbox: + mbox_free_channel(oproc->mbox); + return ret; +} + +/* power off the remote processor */ +static int omap_rproc_stop(struct rproc *rproc) +{ + struct device *dev = rproc->dev.parent; + struct platform_device *pdev = to_platform_device(dev); + struct omap_rproc_pdata *pdata = pdev->dev.platform_data; + struct omap_rproc *oproc = rproc->priv; + int ret; + + ret = pdata->device_shutdown(pdev); + if (ret) + return ret; + + mbox_free_channel(oproc->mbox); + + return 0; +} + +static struct rproc_ops omap_rproc_ops = { + .start = omap_rproc_start, + .stop = omap_rproc_stop, + .kick = omap_rproc_kick, +}; + +static int omap_rproc_probe(struct platform_device *pdev) +{ + struct omap_rproc_pdata *pdata = pdev->dev.platform_data; + struct omap_rproc *oproc; + struct rproc *rproc; + int ret; + + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret); + return ret; + } + + rproc = rproc_alloc(&pdev->dev, pdata->name, &omap_rproc_ops, + pdata->firmware, sizeof(*oproc)); + if (!rproc) + return -ENOMEM; + + oproc = rproc->priv; + oproc->rproc = rproc; + /* All existing OMAP IPU and DSP processors have an MMU */ + rproc->has_iommu = true; + + platform_set_drvdata(pdev, rproc); + + ret = rproc_add(rproc); + if (ret) + goto free_rproc; + + return 0; + +free_rproc: + rproc_put(rproc); + return ret; +} + +static int omap_rproc_remove(struct platform_device *pdev) +{ + struct rproc *rproc = platform_get_drvdata(pdev); + + rproc_del(rproc); + rproc_put(rproc); + + return 0; +} + +static struct platform_driver omap_rproc_driver = { + .probe = omap_rproc_probe, + .remove = omap_rproc_remove, + .driver = { + .name = "omap-rproc", + }, +}; + +module_platform_driver(omap_rproc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("OMAP Remote Processor control driver"); diff --git a/drivers/remoteproc/omap_remoteproc.h b/drivers/remoteproc/omap_remoteproc.h new file mode 100644 index 000000000..f6d2036d3 --- /dev/null +++ b/drivers/remoteproc/omap_remoteproc.h @@ -0,0 +1,69 @@ +/* + * Remote processor messaging + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Texas Instruments nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _OMAP_RPMSG_H +#define _OMAP_RPMSG_H + +/* + * enum - Predefined Mailbox Messages + * + * @RP_MBOX_READY: informs the M3's that we're up and running. this is + * part of the init sequence sent that the M3 expects to see immediately + * after it is booted. + * + * @RP_MBOX_PENDING_MSG: informs the receiver that there is an inbound + * message waiting in its own receive-side vring. please note that currently + * this message is optional: alternatively, one can explicitly send the index + * of the triggered virtqueue itself. the preferred approach will be decided + * as we progress and experiment with those two different approaches. + * + * @RP_MBOX_CRASH: this message is sent if BIOS crashes + * + * @RP_MBOX_ECHO_REQUEST: a mailbox-level "ping" message. + * + * @RP_MBOX_ECHO_REPLY: a mailbox-level reply to a "ping" + * + * @RP_MBOX_ABORT_REQUEST: a "please crash" request, used for testing the + * recovery mechanism (to some extent). + */ +enum omap_rp_mbox_messages { + RP_MBOX_READY = 0xFFFFFF00, + RP_MBOX_PENDING_MSG = 0xFFFFFF01, + RP_MBOX_CRASH = 0xFFFFFF02, + RP_MBOX_ECHO_REQUEST = 0xFFFFFF03, + RP_MBOX_ECHO_REPLY = 0xFFFFFF04, + RP_MBOX_ABORT_REQUEST = 0xFFFFFF05, +}; + +#endif /* _OMAP_RPMSG_H */ diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c new file mode 100644 index 000000000..17086455b --- /dev/null +++ b/drivers/remoteproc/remoteproc_core.c @@ -0,0 +1,1419 @@ +/* + * Remote Processor Framework + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen + * Brian Swetland + * Mark Grosen + * Fernando Guzman Lugo + * Suman Anna + * Robert Tivy + * Armando Uribe De Leon + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" + +typedef int (*rproc_handle_resources_t)(struct rproc *rproc, + struct resource_table *table, int len); +typedef int (*rproc_handle_resource_t)(struct rproc *rproc, + void *, int offset, int avail); + +/* Unique indices for remoteproc devices */ +static DEFINE_IDA(rproc_dev_index); + +static const char * const rproc_crash_names[] = { + [RPROC_MMUFAULT] = "mmufault", +}; + +/* translate rproc_crash_type to string */ +static const char *rproc_crash_to_string(enum rproc_crash_type type) +{ + if (type < ARRAY_SIZE(rproc_crash_names)) + return rproc_crash_names[type]; + return "unknown"; +} + +/* + * This is the IOMMU fault handler we register with the IOMMU API + * (when relevant; not all remote processors access memory through + * an IOMMU). + * + * IOMMU core will invoke this handler whenever the remote processor + * will try to access an unmapped device address. + */ +static int rproc_iommu_fault(struct iommu_domain *domain, struct device *dev, + unsigned long iova, int flags, void *token) +{ + struct rproc *rproc = token; + + dev_err(dev, "iommu fault: da 0x%lx flags 0x%x\n", iova, flags); + + rproc_report_crash(rproc, RPROC_MMUFAULT); + + /* + * Let the iommu core know we're not really handling this fault; + * we just used it as a recovery trigger. + */ + return -ENOSYS; +} + +static int rproc_enable_iommu(struct rproc *rproc) +{ + struct iommu_domain *domain; + struct device *dev = rproc->dev.parent; + int ret; + + if (!rproc->has_iommu) { + dev_dbg(dev, "iommu not present\n"); + return 0; + } + + domain = iommu_domain_alloc(dev->bus); + if (!domain) { + dev_err(dev, "can't alloc iommu domain\n"); + return -ENOMEM; + } + + iommu_set_fault_handler(domain, rproc_iommu_fault, rproc); + + ret = iommu_attach_device(domain, dev); + if (ret) { + dev_err(dev, "can't attach iommu device: %d\n", ret); + goto free_domain; + } + + rproc->domain = domain; + + return 0; + +free_domain: + iommu_domain_free(domain); + return ret; +} + +static void rproc_disable_iommu(struct rproc *rproc) +{ + struct iommu_domain *domain = rproc->domain; + struct device *dev = rproc->dev.parent; + + if (!domain) + return; + + iommu_detach_device(domain, dev); + iommu_domain_free(domain); + + return; +} + +/* + * Some remote processors will ask us to allocate them physically contiguous + * memory regions (which we call "carveouts"), and map them to specific + * device addresses (which are hardcoded in the firmware). + * + * They may then ask us to copy objects into specific device addresses (e.g. + * code/data sections) or expose us certain symbols in other device address + * (e.g. their trace buffer). + * + * This function is an internal helper with which we can go over the allocated + * carveouts and translate specific device address to kernel virtual addresses + * so we can access the referenced memory. + * + * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, + * but only on kernel direct mapped RAM memory. Instead, we're just using + * here the output of the DMA API, which should be more correct. + */ +void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) +{ + struct rproc_mem_entry *carveout; + void *ptr = NULL; + + list_for_each_entry(carveout, &rproc->carveouts, node) { + int offset = da - carveout->da; + + /* try next carveout if da is too small */ + if (offset < 0) + continue; + + /* try next carveout if da is too large */ + if (offset + len > carveout->len) + continue; + + ptr = carveout->va + offset; + + break; + } + + return ptr; +} +EXPORT_SYMBOL(rproc_da_to_va); + +int rproc_alloc_vring(struct rproc_vdev *rvdev, int i) +{ + struct rproc *rproc = rvdev->rproc; + struct device *dev = &rproc->dev; + struct rproc_vring *rvring = &rvdev->vring[i]; + struct fw_rsc_vdev *rsc; + dma_addr_t dma; + void *va; + int ret, size, notifyid; + + /* actual size of vring (in bytes) */ + size = PAGE_ALIGN(vring_size(rvring->len, rvring->align)); + + /* + * Allocate non-cacheable memory for the vring. In the future + * this call will also configure the IOMMU for us + */ + va = dma_alloc_coherent(dev->parent, size, &dma, GFP_KERNEL); + if (!va) { + dev_err(dev->parent, "dma_alloc_coherent failed\n"); + return -EINVAL; + } + + /* + * Assign an rproc-wide unique index for this vring + * TODO: assign a notifyid for rvdev updates as well + * TODO: support predefined notifyids (via resource table) + */ + ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL); + if (ret < 0) { + dev_err(dev, "idr_alloc failed: %d\n", ret); + dma_free_coherent(dev->parent, size, va, dma); + return ret; + } + notifyid = ret; + + dev_dbg(dev, "vring%d: va %p dma %llx size %x idr %d\n", i, va, + (unsigned long long)dma, size, notifyid); + + rvring->va = va; + rvring->dma = dma; + rvring->notifyid = notifyid; + + /* + * Let the rproc know the notifyid and da of this vring. + * Not all platforms use dma_alloc_coherent to automatically + * set up the iommu. In this case the device address (da) will + * hold the physical address and not the device address. + */ + rsc = (void *)rproc->table_ptr + rvdev->rsc_offset; + rsc->vring[i].da = dma; + rsc->vring[i].notifyid = notifyid; + return 0; +} + +static int +rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i) +{ + struct rproc *rproc = rvdev->rproc; + struct device *dev = &rproc->dev; + struct fw_rsc_vdev_vring *vring = &rsc->vring[i]; + struct rproc_vring *rvring = &rvdev->vring[i]; + + dev_dbg(dev, "vdev rsc: vring%d: da %x, qsz %d, align %d\n", + i, vring->da, vring->num, vring->align); + + /* make sure reserved bytes are zeroes */ + if (vring->reserved) { + dev_err(dev, "vring rsc has non zero reserved bytes\n"); + return -EINVAL; + } + + /* verify queue size and vring alignment are sane */ + if (!vring->num || !vring->align) { + dev_err(dev, "invalid qsz (%d) or alignment (%d)\n", + vring->num, vring->align); + return -EINVAL; + } + + rvring->len = vring->num; + rvring->align = vring->align; + rvring->rvdev = rvdev; + + return 0; +} + +void rproc_free_vring(struct rproc_vring *rvring) +{ + int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align)); + struct rproc *rproc = rvring->rvdev->rproc; + int idx = rvring->rvdev->vring - rvring; + struct fw_rsc_vdev *rsc; + + dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma); + idr_remove(&rproc->notifyids, rvring->notifyid); + + /* reset resource entry info */ + rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset; + rsc->vring[idx].da = 0; + rsc->vring[idx].notifyid = -1; +} + +/** + * rproc_handle_vdev() - handle a vdev fw resource + * @rproc: the remote processor + * @rsc: the vring resource descriptor + * @avail: size of available data (for sanity checking the image) + * + * This resource entry requests the host to statically register a virtio + * device (vdev), and setup everything needed to support it. It contains + * everything needed to make it possible: the virtio device id, virtio + * device features, vrings information, virtio config space, etc... + * + * Before registering the vdev, the vrings are allocated from non-cacheable + * physically contiguous memory. Currently we only support two vrings per + * remote processor (temporary limitation). We might also want to consider + * doing the vring allocation only later when ->find_vqs() is invoked, and + * then release them upon ->del_vqs(). + * + * Note: @da is currently not really handled correctly: we dynamically + * allocate it using the DMA API, ignoring requested hard coded addresses, + * and we don't take care of any required IOMMU programming. This is all + * going to be taken care of when the generic iommu-based DMA API will be + * merged. Meanwhile, statically-addressed iommu-based firmware images should + * use RSC_DEVMEM resource entries to map their required @da to the physical + * address of their base CMA region (ouch, hacky!). + * + * Returns 0 on success, or an appropriate error code otherwise + */ +static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, + int offset, int avail) +{ + struct device *dev = &rproc->dev; + struct rproc_vdev *rvdev; + int i, ret; + + /* make sure resource isn't truncated */ + if (sizeof(*rsc) + rsc->num_of_vrings * sizeof(struct fw_rsc_vdev_vring) + + rsc->config_len > avail) { + dev_err(dev, "vdev rsc is truncated\n"); + return -EINVAL; + } + + /* make sure reserved bytes are zeroes */ + if (rsc->reserved[0] || rsc->reserved[1]) { + dev_err(dev, "vdev rsc has non zero reserved bytes\n"); + return -EINVAL; + } + + dev_dbg(dev, "vdev rsc: id %d, dfeatures %x, cfg len %d, %d vrings\n", + rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); + + /* we currently support only two vrings per rvdev */ + if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { + dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); + return -EINVAL; + } + + rvdev = kzalloc(sizeof(struct rproc_vdev), GFP_KERNEL); + if (!rvdev) + return -ENOMEM; + + rvdev->rproc = rproc; + + /* parse the vrings */ + for (i = 0; i < rsc->num_of_vrings; i++) { + ret = rproc_parse_vring(rvdev, rsc, i); + if (ret) + goto free_rvdev; + } + + /* remember the resource offset*/ + rvdev->rsc_offset = offset; + + list_add_tail(&rvdev->node, &rproc->rvdevs); + + /* it is now safe to add the virtio device */ + ret = rproc_add_virtio_dev(rvdev, rsc->id); + if (ret) + goto remove_rvdev; + + return 0; + +remove_rvdev: + list_del(&rvdev->node); +free_rvdev: + kfree(rvdev); + return ret; +} + +/** + * rproc_handle_trace() - handle a shared trace buffer resource + * @rproc: the remote processor + * @rsc: the trace resource descriptor + * @avail: size of available data (for sanity checking the image) + * + * In case the remote processor dumps trace logs into memory, + * export it via debugfs. + * + * Currently, the 'da' member of @rsc should contain the device address + * where the remote processor is dumping the traces. Later we could also + * support dynamically allocating this address using the generic + * DMA API (but currently there isn't a use case for that). + * + * Returns 0 on success, or an appropriate error code otherwise + */ +static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc, + int offset, int avail) +{ + struct rproc_mem_entry *trace; + struct device *dev = &rproc->dev; + void *ptr; + char name[15]; + + if (sizeof(*rsc) > avail) { + dev_err(dev, "trace rsc is truncated\n"); + return -EINVAL; + } + + /* make sure reserved bytes are zeroes */ + if (rsc->reserved) { + dev_err(dev, "trace rsc has non zero reserved bytes\n"); + return -EINVAL; + } + + /* what's the kernel address of this resource ? */ + ptr = rproc_da_to_va(rproc, rsc->da, rsc->len); + if (!ptr) { + dev_err(dev, "erroneous trace resource entry\n"); + return -EINVAL; + } + + trace = kzalloc(sizeof(*trace), GFP_KERNEL); + if (!trace) { + dev_err(dev, "kzalloc trace failed\n"); + return -ENOMEM; + } + + /* set the trace buffer dma properties */ + trace->len = rsc->len; + trace->va = ptr; + + /* make sure snprintf always null terminates, even if truncating */ + snprintf(name, sizeof(name), "trace%d", rproc->num_traces); + + /* create the debugfs entry */ + trace->priv = rproc_create_trace_file(name, rproc, trace); + if (!trace->priv) { + trace->va = NULL; + kfree(trace); + return -EINVAL; + } + + list_add_tail(&trace->node, &rproc->traces); + + rproc->num_traces++; + + dev_dbg(dev, "%s added: va %p, da 0x%x, len 0x%x\n", name, ptr, + rsc->da, rsc->len); + + return 0; +} + +/** + * rproc_handle_devmem() - handle devmem resource entry + * @rproc: remote processor handle + * @rsc: the devmem resource entry + * @avail: size of available data (for sanity checking the image) + * + * Remote processors commonly need to access certain on-chip peripherals. + * + * Some of these remote processors access memory via an iommu device, + * and might require us to configure their iommu before they can access + * the on-chip peripherals they need. + * + * This resource entry is a request to map such a peripheral device. + * + * These devmem entries will contain the physical address of the device in + * the 'pa' member. If a specific device address is expected, then 'da' will + * contain it (currently this is the only use case supported). 'len' will + * contain the size of the physical region we need to map. + * + * Currently we just "trust" those devmem entries to contain valid physical + * addresses, but this is going to change: we want the implementations to + * tell us ranges of physical addresses the firmware is allowed to request, + * and not allow firmwares to request access to physical addresses that + * are outside those ranges. + */ +static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc, + int offset, int avail) +{ + struct rproc_mem_entry *mapping; + struct device *dev = &rproc->dev; + int ret; + + /* no point in handling this resource without a valid iommu domain */ + if (!rproc->domain) + return -EINVAL; + + if (sizeof(*rsc) > avail) { + dev_err(dev, "devmem rsc is truncated\n"); + return -EINVAL; + } + + /* make sure reserved bytes are zeroes */ + if (rsc->reserved) { + dev_err(dev, "devmem rsc has non zero reserved bytes\n"); + return -EINVAL; + } + + mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); + if (!mapping) { + dev_err(dev, "kzalloc mapping failed\n"); + return -ENOMEM; + } + + ret = iommu_map(rproc->domain, rsc->da, rsc->pa, rsc->len, rsc->flags); + if (ret) { + dev_err(dev, "failed to map devmem: %d\n", ret); + goto out; + } + + /* + * We'll need this info later when we'll want to unmap everything + * (e.g. on shutdown). + * + * We can't trust the remote processor not to change the resource + * table, so we must maintain this info independently. + */ + mapping->da = rsc->da; + mapping->len = rsc->len; + list_add_tail(&mapping->node, &rproc->mappings); + + dev_dbg(dev, "mapped devmem pa 0x%x, da 0x%x, len 0x%x\n", + rsc->pa, rsc->da, rsc->len); + + return 0; + +out: + kfree(mapping); + return ret; +} + +/** + * rproc_handle_carveout() - handle phys contig memory allocation requests + * @rproc: rproc handle + * @rsc: the resource entry + * @avail: size of available data (for image validation) + * + * This function will handle firmware requests for allocation of physically + * contiguous memory regions. + * + * These request entries should come first in the firmware's resource table, + * as other firmware entries might request placing other data objects inside + * these memory regions (e.g. data/code segments, trace resource entries, ...). + * + * Allocating memory this way helps utilizing the reserved physical memory + * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries + * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB + * pressure is important; it may have a substantial impact on performance. + */ +static int rproc_handle_carveout(struct rproc *rproc, + struct fw_rsc_carveout *rsc, + int offset, int avail) + +{ + struct rproc_mem_entry *carveout, *mapping; + struct device *dev = &rproc->dev; + dma_addr_t dma; + void *va; + int ret; + + if (sizeof(*rsc) > avail) { + dev_err(dev, "carveout rsc is truncated\n"); + return -EINVAL; + } + + /* make sure reserved bytes are zeroes */ + if (rsc->reserved) { + dev_err(dev, "carveout rsc has non zero reserved bytes\n"); + return -EINVAL; + } + + dev_dbg(dev, "carveout rsc: da %x, pa %x, len %x, flags %x\n", + rsc->da, rsc->pa, rsc->len, rsc->flags); + + carveout = kzalloc(sizeof(*carveout), GFP_KERNEL); + if (!carveout) { + dev_err(dev, "kzalloc carveout failed\n"); + return -ENOMEM; + } + + va = dma_alloc_coherent(dev->parent, rsc->len, &dma, GFP_KERNEL); + if (!va) { + dev_err(dev->parent, "dma_alloc_coherent err: %d\n", rsc->len); + ret = -ENOMEM; + goto free_carv; + } + + dev_dbg(dev, "carveout va %p, dma %llx, len 0x%x\n", va, + (unsigned long long)dma, rsc->len); + + /* + * Ok, this is non-standard. + * + * Sometimes we can't rely on the generic iommu-based DMA API + * to dynamically allocate the device address and then set the IOMMU + * tables accordingly, because some remote processors might + * _require_ us to use hard coded device addresses that their + * firmware was compiled with. + * + * In this case, we must use the IOMMU API directly and map + * the memory to the device address as expected by the remote + * processor. + * + * Obviously such remote processor devices should not be configured + * to use the iommu-based DMA API: we expect 'dma' to contain the + * physical address in this case. + */ + if (rproc->domain) { + mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); + if (!mapping) { + dev_err(dev, "kzalloc mapping failed\n"); + ret = -ENOMEM; + goto dma_free; + } + + ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len, + rsc->flags); + if (ret) { + dev_err(dev, "iommu_map failed: %d\n", ret); + goto free_mapping; + } + + /* + * We'll need this info later when we'll want to unmap + * everything (e.g. on shutdown). + * + * We can't trust the remote processor not to change the + * resource table, so we must maintain this info independently. + */ + mapping->da = rsc->da; + mapping->len = rsc->len; + list_add_tail(&mapping->node, &rproc->mappings); + + dev_dbg(dev, "carveout mapped 0x%x to 0x%llx\n", + rsc->da, (unsigned long long)dma); + } + + /* + * Some remote processors might need to know the pa + * even though they are behind an IOMMU. E.g., OMAP4's + * remote M3 processor needs this so it can control + * on-chip hardware accelerators that are not behind + * the IOMMU, and therefor must know the pa. + * + * Generally we don't want to expose physical addresses + * if we don't have to (remote processors are generally + * _not_ trusted), so we might want to do this only for + * remote processor that _must_ have this (e.g. OMAP4's + * dual M3 subsystem). + * + * Non-IOMMU processors might also want to have this info. + * In this case, the device address and the physical address + * are the same. + */ + rsc->pa = dma; + + carveout->va = va; + carveout->len = rsc->len; + carveout->dma = dma; + carveout->da = rsc->da; + + list_add_tail(&carveout->node, &rproc->carveouts); + + return 0; + +free_mapping: + kfree(mapping); +dma_free: + dma_free_coherent(dev->parent, rsc->len, va, dma); +free_carv: + kfree(carveout); + return ret; +} + +static int rproc_count_vrings(struct rproc *rproc, struct fw_rsc_vdev *rsc, + int offset, int avail) +{ + /* Summarize the number of notification IDs */ + rproc->max_notifyid += rsc->num_of_vrings; + + return 0; +} + +/* + * A lookup table for resource handlers. The indices are defined in + * enum fw_resource_type. + */ +static rproc_handle_resource_t rproc_loading_handlers[RSC_LAST] = { + [RSC_CARVEOUT] = (rproc_handle_resource_t)rproc_handle_carveout, + [RSC_DEVMEM] = (rproc_handle_resource_t)rproc_handle_devmem, + [RSC_TRACE] = (rproc_handle_resource_t)rproc_handle_trace, + [RSC_VDEV] = NULL, /* VDEVs were handled upon registrarion */ +}; + +static rproc_handle_resource_t rproc_vdev_handler[RSC_LAST] = { + [RSC_VDEV] = (rproc_handle_resource_t)rproc_handle_vdev, +}; + +static rproc_handle_resource_t rproc_count_vrings_handler[RSC_LAST] = { + [RSC_VDEV] = (rproc_handle_resource_t)rproc_count_vrings, +}; + +/* handle firmware resource entries before booting the remote processor */ +static int rproc_handle_resources(struct rproc *rproc, int len, + rproc_handle_resource_t handlers[RSC_LAST]) +{ + struct device *dev = &rproc->dev; + rproc_handle_resource_t handler; + int ret = 0, i; + + for (i = 0; i < rproc->table_ptr->num; i++) { + int offset = rproc->table_ptr->offset[i]; + struct fw_rsc_hdr *hdr = (void *)rproc->table_ptr + offset; + int avail = len - offset - sizeof(*hdr); + void *rsc = (void *)hdr + sizeof(*hdr); + + /* make sure table isn't truncated */ + if (avail < 0) { + dev_err(dev, "rsc table is truncated\n"); + return -EINVAL; + } + + dev_dbg(dev, "rsc: type %d\n", hdr->type); + + if (hdr->type >= RSC_LAST) { + dev_warn(dev, "unsupported resource %d\n", hdr->type); + continue; + } + + handler = handlers[hdr->type]; + if (!handler) + continue; + + ret = handler(rproc, rsc, offset + sizeof(*hdr), avail); + if (ret) + break; + } + + return ret; +} + +/** + * rproc_resource_cleanup() - clean up and free all acquired resources + * @rproc: rproc handle + * + * This function will free all resources acquired for @rproc, and it + * is called whenever @rproc either shuts down or fails to boot. + */ +static void rproc_resource_cleanup(struct rproc *rproc) +{ + struct rproc_mem_entry *entry, *tmp; + struct device *dev = &rproc->dev; + + /* clean up debugfs trace entries */ + list_for_each_entry_safe(entry, tmp, &rproc->traces, node) { + rproc_remove_trace_file(entry->priv); + rproc->num_traces--; + list_del(&entry->node); + kfree(entry); + } + + /* clean up iommu mapping entries */ + list_for_each_entry_safe(entry, tmp, &rproc->mappings, node) { + size_t unmapped; + + unmapped = iommu_unmap(rproc->domain, entry->da, entry->len); + if (unmapped != entry->len) { + /* nothing much to do besides complaining */ + dev_err(dev, "failed to unmap %u/%zu\n", entry->len, + unmapped); + } + + list_del(&entry->node); + kfree(entry); + } + + /* clean up carveout allocations */ + list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) { + dma_free_coherent(dev->parent, entry->len, entry->va, entry->dma); + list_del(&entry->node); + kfree(entry); + } +} + +/* + * take a firmware and boot a remote processor with it. + */ +static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) +{ + struct device *dev = &rproc->dev; + const char *name = rproc->firmware; + struct resource_table *table, *loaded_table; + int ret, tablesz; + + if (!rproc->table_ptr) + return -ENOMEM; + + ret = rproc_fw_sanity_check(rproc, fw); + if (ret) + return ret; + + dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size); + + /* + * if enabling an IOMMU isn't relevant for this rproc, this is + * just a nop + */ + ret = rproc_enable_iommu(rproc); + if (ret) { + dev_err(dev, "can't enable iommu: %d\n", ret); + return ret; + } + + rproc->bootaddr = rproc_get_boot_addr(rproc, fw); + ret = -EINVAL; + + /* look for the resource table */ + table = rproc_find_rsc_table(rproc, fw, &tablesz); + if (!table) { + goto clean_up; + } + + /* Verify that resource table in loaded fw is unchanged */ + if (rproc->table_csum != crc32(0, table, tablesz)) { + dev_err(dev, "resource checksum failed, fw changed?\n"); + goto clean_up; + } + + /* handle fw resources which are required to boot rproc */ + ret = rproc_handle_resources(rproc, tablesz, rproc_loading_handlers); + if (ret) { + dev_err(dev, "Failed to process resources: %d\n", ret); + goto clean_up; + } + + /* load the ELF segments to memory */ + ret = rproc_load_segments(rproc, fw); + if (ret) { + dev_err(dev, "Failed to load program segments: %d\n", ret); + goto clean_up; + } + + /* + * The starting device has been given the rproc->cached_table as the + * resource table. The address of the vring along with the other + * allocated resources (carveouts etc) is stored in cached_table. + * In order to pass this information to the remote device we must + * copy this information to device memory. + */ + loaded_table = rproc_find_loaded_rsc_table(rproc, fw); + if (!loaded_table) { + ret = -EINVAL; + goto clean_up; + } + + memcpy(loaded_table, rproc->cached_table, tablesz); + + /* power up the remote processor */ + ret = rproc->ops->start(rproc); + if (ret) { + dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); + goto clean_up; + } + + /* + * Update table_ptr so that all subsequent vring allocations and + * virtio fields manipulation update the actual loaded resource table + * in device memory. + */ + rproc->table_ptr = loaded_table; + + rproc->state = RPROC_RUNNING; + + dev_info(dev, "remote processor %s is now up\n", rproc->name); + + return 0; + +clean_up: + rproc_resource_cleanup(rproc); + rproc_disable_iommu(rproc); + return ret; +} + +/* + * take a firmware and look for virtio devices to register. + * + * Note: this function is called asynchronously upon registration of the + * remote processor (so we must wait until it completes before we try + * to unregister the device. one other option is just to use kref here, + * that might be cleaner). + */ +static void rproc_fw_config_virtio(const struct firmware *fw, void *context) +{ + struct rproc *rproc = context; + struct resource_table *table; + int ret, tablesz; + + if (rproc_fw_sanity_check(rproc, fw) < 0) + goto out; + + /* look for the resource table */ + table = rproc_find_rsc_table(rproc, fw, &tablesz); + if (!table) + goto out; + + rproc->table_csum = crc32(0, table, tablesz); + + /* + * Create a copy of the resource table. When a virtio device starts + * and calls vring_new_virtqueue() the address of the allocated vring + * will be stored in the cached_table. Before the device is started, + * cached_table will be copied into devic memory. + */ + rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL); + if (!rproc->cached_table) + goto out; + + rproc->table_ptr = rproc->cached_table; + + /* count the number of notify-ids */ + rproc->max_notifyid = -1; + ret = rproc_handle_resources(rproc, tablesz, rproc_count_vrings_handler); + if (ret) + goto out; + + /* look for virtio devices and register them */ + ret = rproc_handle_resources(rproc, tablesz, rproc_vdev_handler); + +out: + release_firmware(fw); + /* allow rproc_del() contexts, if any, to proceed */ + complete_all(&rproc->firmware_loading_complete); +} + +static int rproc_add_virtio_devices(struct rproc *rproc) +{ + int ret; + + /* rproc_del() calls must wait until async loader completes */ + init_completion(&rproc->firmware_loading_complete); + + /* + * We must retrieve early virtio configuration info from + * the firmware (e.g. whether to register a virtio device, + * what virtio features does it support, ...). + * + * We're initiating an asynchronous firmware loading, so we can + * be built-in kernel code, without hanging the boot process. + */ + ret = maybe_reject_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, + rproc->firmware, &rproc->dev, GFP_KERNEL, + rproc, rproc_fw_config_virtio); + if (ret < 0) { + dev_err(&rproc->dev, "request_firmware_nowait err: %d\n", ret); + complete_all(&rproc->firmware_loading_complete); + } + + return ret; +} + +/** + * rproc_trigger_recovery() - recover a remoteproc + * @rproc: the remote processor + * + * The recovery is done by reseting all the virtio devices, that way all the + * rpmsg drivers will be reseted along with the remote processor making the + * remoteproc functional again. + * + * This function can sleep, so it cannot be called from atomic context. + */ +int rproc_trigger_recovery(struct rproc *rproc) +{ + struct rproc_vdev *rvdev, *rvtmp; + + dev_err(&rproc->dev, "recovering %s\n", rproc->name); + + init_completion(&rproc->crash_comp); + + /* clean up remote vdev entries */ + list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) + rproc_remove_virtio_dev(rvdev); + + /* wait until there is no more rproc users */ + wait_for_completion(&rproc->crash_comp); + + /* Free the copy of the resource table */ + kfree(rproc->cached_table); + + return rproc_add_virtio_devices(rproc); +} + +/** + * rproc_crash_handler_work() - handle a crash + * + * This function needs to handle everything related to a crash, like cpu + * registers and stack dump, information to help to debug the fatal error, etc. + */ +static void rproc_crash_handler_work(struct work_struct *work) +{ + struct rproc *rproc = container_of(work, struct rproc, crash_handler); + struct device *dev = &rproc->dev; + + dev_dbg(dev, "enter %s\n", __func__); + + mutex_lock(&rproc->lock); + + if (rproc->state == RPROC_CRASHED || rproc->state == RPROC_OFFLINE) { + /* handle only the first crash detected */ + mutex_unlock(&rproc->lock); + return; + } + + rproc->state = RPROC_CRASHED; + dev_err(dev, "handling crash #%u in %s\n", ++rproc->crash_cnt, + rproc->name); + + mutex_unlock(&rproc->lock); + + if (!rproc->recovery_disabled) + rproc_trigger_recovery(rproc); +} + +/** + * rproc_boot() - boot a remote processor + * @rproc: handle of a remote processor + * + * Boot a remote processor (i.e. load its firmware, power it on, ...). + * + * If the remote processor is already powered on, this function immediately + * returns (successfully). + * + * Returns 0 on success, and an appropriate error value otherwise. + */ +int rproc_boot(struct rproc *rproc) +{ + const struct firmware *firmware_p; + struct device *dev; + int ret; + + if (!rproc) { + pr_err("invalid rproc handle\n"); + return -EINVAL; + } + + dev = &rproc->dev; + + ret = mutex_lock_interruptible(&rproc->lock); + if (ret) { + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, ret); + return ret; + } + + /* loading a firmware is required */ + if (!rproc->firmware) { + dev_err(dev, "%s: no firmware to load\n", __func__); + ret = -EINVAL; + goto unlock_mutex; + } + + /* prevent underlying implementation from being removed */ + if (!try_module_get(dev->parent->driver->owner)) { + dev_err(dev, "%s: can't get owner\n", __func__); + ret = -EINVAL; + goto unlock_mutex; + } + + /* skip the boot process if rproc is already powered up */ + if (atomic_inc_return(&rproc->power) > 1) { + ret = 0; + goto unlock_mutex; + } + + dev_info(dev, "powering up %s\n", rproc->name); + + /* load firmware */ + ret = maybe_reject_firmware(&firmware_p, rproc->firmware, dev); + if (ret < 0) { + dev_err(dev, "request_firmware failed: %d\n", ret); + goto downref_rproc; + } + + ret = rproc_fw_boot(rproc, firmware_p); + + release_firmware(firmware_p); + +downref_rproc: + if (ret) { + module_put(dev->parent->driver->owner); + atomic_dec(&rproc->power); + } +unlock_mutex: + mutex_unlock(&rproc->lock); + return ret; +} +EXPORT_SYMBOL(rproc_boot); + +/** + * rproc_shutdown() - power off the remote processor + * @rproc: the remote processor + * + * Power off a remote processor (previously booted with rproc_boot()). + * + * In case @rproc is still being used by an additional user(s), then + * this function will just decrement the power refcount and exit, + * without really powering off the device. + * + * Every call to rproc_boot() must (eventually) be accompanied by a call + * to rproc_shutdown(). Calling rproc_shutdown() redundantly is a bug. + * + * Notes: + * - we're not decrementing the rproc's refcount, only the power refcount. + * which means that the @rproc handle stays valid even after rproc_shutdown() + * returns, and users can still use it with a subsequent rproc_boot(), if + * needed. + */ +void rproc_shutdown(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + int ret; + + ret = mutex_lock_interruptible(&rproc->lock); + if (ret) { + dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, ret); + return; + } + + /* if the remote proc is still needed, bail out */ + if (!atomic_dec_and_test(&rproc->power)) + goto out; + + /* power off the remote processor */ + ret = rproc->ops->stop(rproc); + if (ret) { + atomic_inc(&rproc->power); + dev_err(dev, "can't stop rproc: %d\n", ret); + goto out; + } + + /* clean up all acquired resources */ + rproc_resource_cleanup(rproc); + + rproc_disable_iommu(rproc); + + /* Give the next start a clean resource table */ + rproc->table_ptr = rproc->cached_table; + + /* if in crash state, unlock crash handler */ + if (rproc->state == RPROC_CRASHED) + complete_all(&rproc->crash_comp); + + rproc->state = RPROC_OFFLINE; + + dev_info(dev, "stopped remote processor %s\n", rproc->name); + +out: + mutex_unlock(&rproc->lock); + if (!ret) + module_put(dev->parent->driver->owner); +} +EXPORT_SYMBOL(rproc_shutdown); + +/** + * rproc_add() - register a remote processor + * @rproc: the remote processor handle to register + * + * Registers @rproc with the remoteproc framework, after it has been + * allocated with rproc_alloc(). + * + * This is called by the platform-specific rproc implementation, whenever + * a new remote processor device is probed. + * + * Returns 0 on success and an appropriate error code otherwise. + * + * Note: this function initiates an asynchronous firmware loading + * context, which will look for virtio devices supported by the rproc's + * firmware. + * + * If found, those virtio devices will be created and added, so as a result + * of registering this remote processor, additional virtio drivers might be + * probed. + */ +int rproc_add(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + int ret; + + ret = device_add(dev); + if (ret < 0) + return ret; + + dev_info(dev, "%s is available\n", rproc->name); + + dev_info(dev, "Note: remoteproc is still under development and considered experimental.\n"); + dev_info(dev, "THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.\n"); + + /* create debugfs entries */ + rproc_create_debug_dir(rproc); + + return rproc_add_virtio_devices(rproc); +} +EXPORT_SYMBOL(rproc_add); + +/** + * rproc_type_release() - release a remote processor instance + * @dev: the rproc's device + * + * This function should _never_ be called directly. + * + * It will be called by the driver core when no one holds a valid pointer + * to @dev anymore. + */ +static void rproc_type_release(struct device *dev) +{ + struct rproc *rproc = container_of(dev, struct rproc, dev); + + dev_info(&rproc->dev, "releasing %s\n", rproc->name); + + rproc_delete_debug_dir(rproc); + + idr_destroy(&rproc->notifyids); + + if (rproc->index >= 0) + ida_simple_remove(&rproc_dev_index, rproc->index); + + kfree(rproc); +} + +static struct device_type rproc_type = { + .name = "remoteproc", + .release = rproc_type_release, +}; + +/** + * rproc_alloc() - allocate a remote processor handle + * @dev: the underlying device + * @name: name of this remote processor + * @ops: platform-specific handlers (mainly start/stop) + * @firmware: name of firmware file to load, can be NULL + * @len: length of private data needed by the rproc driver (in bytes) + * + * Allocates a new remote processor handle, but does not register + * it yet. if @firmware is NULL, a default name is used. + * + * This function should be used by rproc implementations during initialization + * of the remote processor. + * + * After creating an rproc handle using this function, and when ready, + * implementations should then call rproc_add() to complete + * the registration of the remote processor. + * + * On success the new rproc is returned, and on failure, NULL. + * + * Note: _never_ directly deallocate @rproc, even if it was not registered + * yet. Instead, when you need to unroll rproc_alloc(), use rproc_put(). + */ +struct rproc *rproc_alloc(struct device *dev, const char *name, + const struct rproc_ops *ops, + const char *firmware, int len) +{ + struct rproc *rproc; + char *p, *template = "rproc-%s-fw"; + int name_len = 0; + + if (!dev || !name || !ops) + return NULL; + + if (!firmware) + /* + * Make room for default firmware name (minus %s plus '\0'). + * If the caller didn't pass in a firmware name then + * construct a default name. We're already glomming 'len' + * bytes onto the end of the struct rproc allocation, so do + * a few more for the default firmware name (but only if + * the caller doesn't pass one). + */ + name_len = strlen(name) + strlen(template) - 2 + 1; + + rproc = kzalloc(sizeof(struct rproc) + len + name_len, GFP_KERNEL); + if (!rproc) { + dev_err(dev, "%s: kzalloc failed\n", __func__); + return NULL; + } + + if (!firmware) { + p = (char *)rproc + sizeof(struct rproc) + len; + snprintf(p, name_len, template, name); + } else { + p = (char *)firmware; + } + + rproc->firmware = p; + rproc->name = name; + rproc->ops = ops; + rproc->priv = &rproc[1]; + + device_initialize(&rproc->dev); + rproc->dev.parent = dev; + rproc->dev.type = &rproc_type; + + /* Assign a unique device index and name */ + rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); + if (rproc->index < 0) { + dev_err(dev, "ida_simple_get failed: %d\n", rproc->index); + put_device(&rproc->dev); + return NULL; + } + + dev_set_name(&rproc->dev, "remoteproc%d", rproc->index); + + atomic_set(&rproc->power, 0); + + /* Set ELF as the default fw_ops handler */ + rproc->fw_ops = &rproc_elf_fw_ops; + + mutex_init(&rproc->lock); + + idr_init(&rproc->notifyids); + + INIT_LIST_HEAD(&rproc->carveouts); + INIT_LIST_HEAD(&rproc->mappings); + INIT_LIST_HEAD(&rproc->traces); + INIT_LIST_HEAD(&rproc->rvdevs); + + INIT_WORK(&rproc->crash_handler, rproc_crash_handler_work); + init_completion(&rproc->crash_comp); + + rproc->state = RPROC_OFFLINE; + + return rproc; +} +EXPORT_SYMBOL(rproc_alloc); + +/** + * rproc_put() - unroll rproc_alloc() + * @rproc: the remote processor handle + * + * This function decrements the rproc dev refcount. + * + * If no one holds any reference to rproc anymore, then its refcount would + * now drop to zero, and it would be freed. + */ +void rproc_put(struct rproc *rproc) +{ + put_device(&rproc->dev); +} +EXPORT_SYMBOL(rproc_put); + +/** + * rproc_del() - unregister a remote processor + * @rproc: rproc handle to unregister + * + * This function should be called when the platform specific rproc + * implementation decides to remove the rproc device. it should + * _only_ be called if a previous invocation of rproc_add() + * has completed successfully. + * + * After rproc_del() returns, @rproc isn't freed yet, because + * of the outstanding reference created by rproc_alloc. To decrement that + * one last refcount, one still needs to call rproc_put(). + * + * Returns 0 on success and -EINVAL if @rproc isn't valid. + */ +int rproc_del(struct rproc *rproc) +{ + struct rproc_vdev *rvdev, *tmp; + + if (!rproc) + return -EINVAL; + + /* if rproc is just being registered, wait */ + wait_for_completion(&rproc->firmware_loading_complete); + + /* clean up remote vdev entries */ + list_for_each_entry_safe(rvdev, tmp, &rproc->rvdevs, node) + rproc_remove_virtio_dev(rvdev); + + /* Free the copy of the resource table */ + kfree(rproc->cached_table); + + device_del(&rproc->dev); + + return 0; +} +EXPORT_SYMBOL(rproc_del); + +/** + * rproc_report_crash() - rproc crash reporter function + * @rproc: remote processor + * @type: crash type + * + * This function must be called every time a crash is detected by the low-level + * drivers implementing a specific remoteproc. This should not be called from a + * non-remoteproc driver. + * + * This function can be called from atomic/interrupt context. + */ +void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type) +{ + if (!rproc) { + pr_err("NULL rproc pointer\n"); + return; + } + + dev_err(&rproc->dev, "crash detected in %s: type %s\n", + rproc->name, rproc_crash_to_string(type)); + + /* create a new task to handle the error */ + schedule_work(&rproc->crash_handler); +} +EXPORT_SYMBOL(rproc_report_crash); + +static int __init remoteproc_init(void) +{ + rproc_init_debugfs(); + + return 0; +} +module_init(remoteproc_init); + +static void __exit remoteproc_exit(void) +{ + rproc_exit_debugfs(); +} +module_exit(remoteproc_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Generic Remote Processor Framework"); diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c new file mode 100644 index 000000000..9d30809bb --- /dev/null +++ b/drivers/remoteproc/remoteproc_debugfs.c @@ -0,0 +1,252 @@ +/* + * Remote Processor Framework + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen + * Mark Grosen + * Brian Swetland + * Fernando Guzman Lugo + * Suman Anna + * Robert Tivy + * Armando Uribe De Leon + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" + +/* remoteproc debugfs parent dir */ +static struct dentry *rproc_dbg; + +/* + * Some remote processors may support dumping trace logs into a shared + * memory buffer. We expose this trace buffer using debugfs, so users + * can easily tell what's going on remotely. + * + * We will most probably improve the rproc tracing facilities later on, + * but this kind of lightweight and simple mechanism is always good to have, + * as it provides very early tracing with little to no dependencies at all. + */ +static ssize_t rproc_trace_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct rproc_mem_entry *trace = filp->private_data; + int len = strnlen(trace->va, trace->len); + + return simple_read_from_buffer(userbuf, count, ppos, trace->va, len); +} + +static const struct file_operations trace_rproc_ops = { + .read = rproc_trace_read, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +/* + * A state-to-string lookup table, for exposing a human readable state + * via debugfs. Always keep in sync with enum rproc_state + */ +static const char * const rproc_state_string[] = { + "offline", + "suspended", + "running", + "crashed", + "invalid", +}; + +/* expose the state of the remote processor via debugfs */ +static ssize_t rproc_state_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct rproc *rproc = filp->private_data; + unsigned int state; + char buf[30]; + int i; + + state = rproc->state > RPROC_LAST ? RPROC_LAST : rproc->state; + + i = scnprintf(buf, 30, "%.28s (%d)\n", rproc_state_string[state], + rproc->state); + + return simple_read_from_buffer(userbuf, count, ppos, buf, i); +} + +static const struct file_operations rproc_state_ops = { + .read = rproc_state_read, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +/* expose the name of the remote processor via debugfs */ +static ssize_t rproc_name_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct rproc *rproc = filp->private_data; + /* need room for the name, a newline and a terminating null */ + char buf[100]; + int i; + + i = scnprintf(buf, sizeof(buf), "%.98s\n", rproc->name); + + return simple_read_from_buffer(userbuf, count, ppos, buf, i); +} + +static const struct file_operations rproc_name_ops = { + .read = rproc_name_read, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +/* expose recovery flag via debugfs */ +static ssize_t rproc_recovery_read(struct file *filp, char __user *userbuf, + size_t count, loff_t *ppos) +{ + struct rproc *rproc = filp->private_data; + char *buf = rproc->recovery_disabled ? "disabled\n" : "enabled\n"; + + return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf)); +} + +/* + * By writing to the 'recovery' debugfs entry, we control the behavior of the + * recovery mechanism dynamically. The default value of this entry is "enabled". + * + * The 'recovery' debugfs entry supports these commands: + * + * enabled: When enabled, the remote processor will be automatically + * recovered whenever it crashes. Moreover, if the remote + * processor crashes while recovery is disabled, it will + * be automatically recovered too as soon as recovery is enabled. + * + * disabled: When disabled, a remote processor will remain in a crashed + * state if it crashes. This is useful for debugging purposes; + * without it, debugging a crash is substantially harder. + * + * recover: This function will trigger an immediate recovery if the + * remote processor is in a crashed state, without changing + * or checking the recovery state (enabled/disabled). + * This is useful during debugging sessions, when one expects + * additional crashes to happen after enabling recovery. In this + * case, enabling recovery will make it hard to debug subsequent + * crashes, so it's recommended to keep recovery disabled, and + * instead use the "recover" command as needed. + */ +static ssize_t +rproc_recovery_write(struct file *filp, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct rproc *rproc = filp->private_data; + char buf[10]; + int ret; + + if (count > sizeof(buf)) + return count; + + ret = copy_from_user(buf, user_buf, count); + if (ret) + return -EFAULT; + + /* remove end of line */ + if (buf[count - 1] == '\n') + buf[count - 1] = '\0'; + + if (!strncmp(buf, "enabled", count)) { + rproc->recovery_disabled = false; + /* if rproc has crashed, trigger recovery */ + if (rproc->state == RPROC_CRASHED) + rproc_trigger_recovery(rproc); + } else if (!strncmp(buf, "disabled", count)) { + rproc->recovery_disabled = true; + } else if (!strncmp(buf, "recover", count)) { + /* if rproc has crashed, trigger recovery */ + if (rproc->state == RPROC_CRASHED) + rproc_trigger_recovery(rproc); + } + + return count; +} + +static const struct file_operations rproc_recovery_ops = { + .read = rproc_recovery_read, + .write = rproc_recovery_write, + .open = simple_open, + .llseek = generic_file_llseek, +}; + +void rproc_remove_trace_file(struct dentry *tfile) +{ + debugfs_remove(tfile); +} + +struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc, + struct rproc_mem_entry *trace) +{ + struct dentry *tfile; + + tfile = debugfs_create_file(name, 0400, rproc->dbg_dir, + trace, &trace_rproc_ops); + if (!tfile) { + dev_err(&rproc->dev, "failed to create debugfs trace entry\n"); + return NULL; + } + + return tfile; +} + +void rproc_delete_debug_dir(struct rproc *rproc) +{ + if (!rproc->dbg_dir) + return; + + debugfs_remove_recursive(rproc->dbg_dir); +} + +void rproc_create_debug_dir(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + + if (!rproc_dbg) + return; + + rproc->dbg_dir = debugfs_create_dir(dev_name(dev), rproc_dbg); + if (!rproc->dbg_dir) + return; + + debugfs_create_file("name", 0400, rproc->dbg_dir, + rproc, &rproc_name_ops); + debugfs_create_file("state", 0400, rproc->dbg_dir, + rproc, &rproc_state_ops); + debugfs_create_file("recovery", 0400, rproc->dbg_dir, + rproc, &rproc_recovery_ops); +} + +void __init rproc_init_debugfs(void) +{ + if (debugfs_initialized()) { + rproc_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!rproc_dbg) + pr_err("can't create debugfs dir\n"); + } +} + +void __exit rproc_exit_debugfs(void) +{ + debugfs_remove(rproc_dbg); +} diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c new file mode 100644 index 000000000..ce283a5b4 --- /dev/null +++ b/drivers/remoteproc/remoteproc_elf_loader.c @@ -0,0 +1,337 @@ +/* + * Remote Processor Framework Elf loader + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen + * Brian Swetland + * Mark Grosen + * Fernando Guzman Lugo + * Suman Anna + * Robert Tivy + * Armando Uribe De Leon + * Sjur Brændeland + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#include +#include +#include +#include + +#include "remoteproc_internal.h" + +/** + * rproc_elf_sanity_check() - Sanity Check ELF firmware image + * @rproc: the remote processor handle + * @fw: the ELF firmware image + * + * Make sure this fw image is sane. + */ +static int +rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw) +{ + const char *name = rproc->firmware; + struct device *dev = &rproc->dev; + struct elf32_hdr *ehdr; + char class; + + if (!fw) { + dev_err(dev, "failed to load %s\n", name); + return -EINVAL; + } + + if (fw->size < sizeof(struct elf32_hdr)) { + dev_err(dev, "Image is too small\n"); + return -EINVAL; + } + + ehdr = (struct elf32_hdr *)fw->data; + + /* We only support ELF32 at this point */ + class = ehdr->e_ident[EI_CLASS]; + if (class != ELFCLASS32) { + dev_err(dev, "Unsupported class: %d\n", class); + return -EINVAL; + } + + /* We assume the firmware has the same endianness as the host */ +# ifdef __LITTLE_ENDIAN + if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { +# else /* BIG ENDIAN */ + if (ehdr->e_ident[EI_DATA] != ELFDATA2MSB) { +# endif + dev_err(dev, "Unsupported firmware endianness\n"); + return -EINVAL; + } + + if (fw->size < ehdr->e_shoff + sizeof(struct elf32_shdr)) { + dev_err(dev, "Image is too small\n"); + return -EINVAL; + } + + if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) { + dev_err(dev, "Image is corrupted (bad magic)\n"); + return -EINVAL; + } + + if (ehdr->e_phnum == 0) { + dev_err(dev, "No loadable segments\n"); + return -EINVAL; + } + + if (ehdr->e_phoff > fw->size) { + dev_err(dev, "Firmware size is too small\n"); + return -EINVAL; + } + + return 0; +} + +/** + * rproc_elf_get_boot_addr() - Get rproc's boot address. + * @rproc: the remote processor handle + * @fw: the ELF firmware image + * + * This function returns the entry point address of the ELF + * image. + * + * Note that the boot address is not a configurable property of all remote + * processors. Some will always boot at a specific hard-coded address. + */ +static +u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) +{ + struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data; + + return ehdr->e_entry; +} + +/** + * rproc_elf_load_segments() - load firmware segments to memory + * @rproc: remote processor which will be booted using these fw segments + * @fw: the ELF firmware image + * + * This function loads the firmware segments to memory, where the remote + * processor expects them. + * + * Some remote processors will expect their code and data to be placed + * in specific device addresses, and can't have them dynamically assigned. + * + * We currently support only those kind of remote processors, and expect + * the program header's paddr member to contain those addresses. We then go + * through the physically contiguous "carveout" memory regions which we + * allocated (and mapped) earlier on behalf of the remote processor, + * and "translate" device address to kernel addresses, so we can copy the + * segments where they are expected. + * + * Currently we only support remote processors that required carveout + * allocations and got them mapped onto their iommus. Some processors + * might be different: they might not have iommus, and would prefer to + * directly allocate memory for every segment/resource. This is not yet + * supported, though. + */ +static int +rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw) +{ + struct device *dev = &rproc->dev; + struct elf32_hdr *ehdr; + struct elf32_phdr *phdr; + int i, ret = 0; + const u8 *elf_data = fw->data; + + ehdr = (struct elf32_hdr *)elf_data; + phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff); + + /* go through the available ELF segments */ + for (i = 0; i < ehdr->e_phnum; i++, phdr++) { + u32 da = phdr->p_paddr; + u32 memsz = phdr->p_memsz; + u32 filesz = phdr->p_filesz; + u32 offset = phdr->p_offset; + void *ptr; + + if (phdr->p_type != PT_LOAD) + continue; + + dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n", + phdr->p_type, da, memsz, filesz); + + if (filesz > memsz) { + dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n", + filesz, memsz); + ret = -EINVAL; + break; + } + + if (offset + filesz > fw->size) { + dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", + offset + filesz, fw->size); + ret = -EINVAL; + break; + } + + /* grab the kernel address for this device address */ + ptr = rproc_da_to_va(rproc, da, memsz); + if (!ptr) { + dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz); + ret = -EINVAL; + break; + } + + /* put the segment where the remote processor expects it */ + if (phdr->p_filesz) + memcpy(ptr, elf_data + phdr->p_offset, filesz); + + /* + * Zero out remaining memory for this segment. + * + * This isn't strictly required since dma_alloc_coherent already + * did this for us. albeit harmless, we may consider removing + * this. + */ + if (memsz > filesz) + memset(ptr + filesz, 0, memsz - filesz); + } + + return ret; +} + +static struct elf32_shdr * +find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size) +{ + struct elf32_shdr *shdr; + int i; + const char *name_table; + struct resource_table *table = NULL; + const u8 *elf_data = (void *)ehdr; + + /* look for the resource table and handle it */ + shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff); + name_table = elf_data + shdr[ehdr->e_shstrndx].sh_offset; + + for (i = 0; i < ehdr->e_shnum; i++, shdr++) { + u32 size = shdr->sh_size; + u32 offset = shdr->sh_offset; + + if (strcmp(name_table + shdr->sh_name, ".resource_table")) + continue; + + table = (struct resource_table *)(elf_data + offset); + + /* make sure we have the entire table */ + if (offset + size > fw_size || offset + size < size) { + dev_err(dev, "resource table truncated\n"); + return NULL; + } + + /* make sure table has at least the header */ + if (sizeof(struct resource_table) > size) { + dev_err(dev, "header-less resource table\n"); + return NULL; + } + + /* we don't support any version beyond the first */ + if (table->ver != 1) { + dev_err(dev, "unsupported fw ver: %d\n", table->ver); + return NULL; + } + + /* make sure reserved bytes are zeroes */ + if (table->reserved[0] || table->reserved[1]) { + dev_err(dev, "non zero reserved bytes\n"); + return NULL; + } + + /* make sure the offsets array isn't truncated */ + if (table->num * sizeof(table->offset[0]) + + sizeof(struct resource_table) > size) { + dev_err(dev, "resource table incomplete\n"); + return NULL; + } + + return shdr; + } + + return NULL; +} + +/** + * rproc_elf_find_rsc_table() - find the resource table + * @rproc: the rproc handle + * @fw: the ELF firmware image + * @tablesz: place holder for providing back the table size + * + * This function finds the resource table inside the remote processor's + * firmware. It is used both upon the registration of @rproc (in order + * to look for and register the supported virito devices), and when the + * @rproc is booted. + * + * Returns the pointer to the resource table if it is found, and write its + * size into @tablesz. If a valid table isn't found, NULL is returned + * (and @tablesz isn't set). + */ +static struct resource_table * +rproc_elf_find_rsc_table(struct rproc *rproc, const struct firmware *fw, + int *tablesz) +{ + struct elf32_hdr *ehdr; + struct elf32_shdr *shdr; + struct device *dev = &rproc->dev; + struct resource_table *table = NULL; + const u8 *elf_data = fw->data; + + ehdr = (struct elf32_hdr *)elf_data; + + shdr = find_table(dev, ehdr, fw->size); + if (!shdr) + return NULL; + + table = (struct resource_table *)(elf_data + shdr->sh_offset); + *tablesz = shdr->sh_size; + + return table; +} + +/** + * rproc_elf_find_loaded_rsc_table() - find the loaded resource table + * @rproc: the rproc handle + * @fw: the ELF firmware image + * + * This function finds the location of the loaded resource table. Don't + * call this function if the table wasn't loaded yet - it's a bug if you do. + * + * Returns the pointer to the resource table if it is found or NULL otherwise. + * If the table wasn't loaded yet the result is unspecified. + */ +static struct resource_table * +rproc_elf_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) +{ + struct elf32_hdr *ehdr = (struct elf32_hdr *)fw->data; + struct elf32_shdr *shdr; + + shdr = find_table(&rproc->dev, ehdr, fw->size); + if (!shdr) + return NULL; + + return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size); +} + +const struct rproc_fw_ops rproc_elf_fw_ops = { + .load = rproc_elf_load_segments, + .find_rsc_table = rproc_elf_find_rsc_table, + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table, + .sanity_check = rproc_elf_sanity_check, + .get_boot_addr = rproc_elf_get_boot_addr +}; diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h new file mode 100644 index 000000000..70701a50d --- /dev/null +++ b/drivers/remoteproc/remoteproc_internal.h @@ -0,0 +1,120 @@ +/* + * Remote processor framework + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen + * Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef REMOTEPROC_INTERNAL_H +#define REMOTEPROC_INTERNAL_H + +#include +#include + +struct rproc; + +/** + * struct rproc_fw_ops - firmware format specific operations. + * @find_rsc_table: find the resource table inside the firmware image + * @find_loaded_rsc_table: find the loaded resouce table + * @load: load firmeware to memory, where the remote processor + * expects to find it + * @sanity_check: sanity check the fw image + * @get_boot_addr: get boot address to entry point specified in firmware + */ +struct rproc_fw_ops { + struct resource_table *(*find_rsc_table) (struct rproc *rproc, + const struct firmware *fw, + int *tablesz); + struct resource_table *(*find_loaded_rsc_table)(struct rproc *rproc, + const struct firmware *fw); + int (*load)(struct rproc *rproc, const struct firmware *fw); + int (*sanity_check)(struct rproc *rproc, const struct firmware *fw); + u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); +}; + +/* from remoteproc_core.c */ +void rproc_release(struct kref *kref); +irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id); + +/* from remoteproc_virtio.c */ +int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id); +void rproc_remove_virtio_dev(struct rproc_vdev *rvdev); + +/* from remoteproc_debugfs.c */ +void rproc_remove_trace_file(struct dentry *tfile); +struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc, + struct rproc_mem_entry *trace); +void rproc_delete_debug_dir(struct rproc *rproc); +void rproc_create_debug_dir(struct rproc *rproc); +void rproc_init_debugfs(void); +void rproc_exit_debugfs(void); + +void rproc_free_vring(struct rproc_vring *rvring); +int rproc_alloc_vring(struct rproc_vdev *rvdev, int i); + +void *rproc_da_to_va(struct rproc *rproc, u64 da, int len); +int rproc_trigger_recovery(struct rproc *rproc); + +static inline +int rproc_fw_sanity_check(struct rproc *rproc, const struct firmware *fw) +{ + if (rproc->fw_ops->sanity_check) + return rproc->fw_ops->sanity_check(rproc, fw); + + return 0; +} + +static inline +u32 rproc_get_boot_addr(struct rproc *rproc, const struct firmware *fw) +{ + if (rproc->fw_ops->get_boot_addr) + return rproc->fw_ops->get_boot_addr(rproc, fw); + + return 0; +} + +static inline +int rproc_load_segments(struct rproc *rproc, const struct firmware *fw) +{ + if (rproc->fw_ops->load) + return rproc->fw_ops->load(rproc, fw); + + return -EINVAL; +} + +static inline +struct resource_table *rproc_find_rsc_table(struct rproc *rproc, + const struct firmware *fw, int *tablesz) +{ + if (rproc->fw_ops->find_rsc_table) + return rproc->fw_ops->find_rsc_table(rproc, fw, tablesz); + + return NULL; +} + +static inline +struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc, + const struct firmware *fw) +{ + if (rproc->fw_ops->find_loaded_rsc_table) + return rproc->fw_ops->find_loaded_rsc_table(rproc, fw); + + return NULL; +} + +extern const struct rproc_fw_ops rproc_elf_fw_ops; + +#endif /* REMOTEPROC_INTERNAL_H */ diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c new file mode 100644 index 000000000..e1a10232a --- /dev/null +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -0,0 +1,363 @@ +/* + * Remote processor messaging transport (OMAP platform-specific bits) + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen + * Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" + +/* kick the remote processor, and let it know which virtqueue to poke at */ +static bool rproc_virtio_notify(struct virtqueue *vq) +{ + struct rproc_vring *rvring = vq->priv; + struct rproc *rproc = rvring->rvdev->rproc; + int notifyid = rvring->notifyid; + + dev_dbg(&rproc->dev, "kicking vq index: %d\n", notifyid); + + rproc->ops->kick(rproc, notifyid); + return true; +} + +/** + * rproc_vq_interrupt() - tell remoteproc that a virtqueue is interrupted + * @rproc: handle to the remote processor + * @notifyid: index of the signalled virtqueue (unique per this @rproc) + * + * This function should be called by the platform-specific rproc driver, + * when the remote processor signals that a specific virtqueue has pending + * messages available. + * + * Returns IRQ_NONE if no message was found in the @notifyid virtqueue, + * and otherwise returns IRQ_HANDLED. + */ +irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int notifyid) +{ + struct rproc_vring *rvring; + + dev_dbg(&rproc->dev, "vq index %d is interrupted\n", notifyid); + + rvring = idr_find(&rproc->notifyids, notifyid); + if (!rvring || !rvring->vq) + return IRQ_NONE; + + return vring_interrupt(0, rvring->vq); +} +EXPORT_SYMBOL(rproc_vq_interrupt); + +static struct virtqueue *rp_find_vq(struct virtio_device *vdev, + unsigned id, + void (*callback)(struct virtqueue *vq), + const char *name) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct rproc *rproc = vdev_to_rproc(vdev); + struct device *dev = &rproc->dev; + struct rproc_vring *rvring; + struct virtqueue *vq; + void *addr; + int len, size, ret; + + /* we're temporarily limited to two virtqueues per rvdev */ + if (id >= ARRAY_SIZE(rvdev->vring)) + return ERR_PTR(-EINVAL); + + if (!name) + return NULL; + + ret = rproc_alloc_vring(rvdev, id); + if (ret) + return ERR_PTR(ret); + + rvring = &rvdev->vring[id]; + addr = rvring->va; + len = rvring->len; + + /* zero vring */ + size = vring_size(len, rvring->align); + memset(addr, 0, size); + + dev_dbg(dev, "vring%d: va %p qsz %d notifyid %d\n", + id, addr, len, rvring->notifyid); + + /* + * Create the new vq, and tell virtio we're not interested in + * the 'weak' smp barriers, since we're talking with a real device. + */ + vq = vring_new_virtqueue(id, len, rvring->align, vdev, false, addr, + rproc_virtio_notify, callback, name); + if (!vq) { + dev_err(dev, "vring_new_virtqueue %s failed\n", name); + rproc_free_vring(rvring); + return ERR_PTR(-ENOMEM); + } + + rvring->vq = vq; + vq->priv = rvring; + + return vq; +} + +static void __rproc_virtio_del_vqs(struct virtio_device *vdev) +{ + struct virtqueue *vq, *n; + struct rproc_vring *rvring; + + list_for_each_entry_safe(vq, n, &vdev->vqs, list) { + rvring = vq->priv; + rvring->vq = NULL; + vring_del_virtqueue(vq); + rproc_free_vring(rvring); + } +} + +static void rproc_virtio_del_vqs(struct virtio_device *vdev) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + + /* power down the remote processor before deleting vqs */ + rproc_shutdown(rproc); + + __rproc_virtio_del_vqs(vdev); +} + +static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs, + struct virtqueue *vqs[], + vq_callback_t *callbacks[], + const char *names[]) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + int i, ret; + + for (i = 0; i < nvqs; ++i) { + vqs[i] = rp_find_vq(vdev, i, callbacks[i], names[i]); + if (IS_ERR(vqs[i])) { + ret = PTR_ERR(vqs[i]); + goto error; + } + } + + /* now that the vqs are all set, boot the remote processor */ + ret = rproc_boot(rproc); + if (ret) { + dev_err(&rproc->dev, "rproc_boot() failed %d\n", ret); + goto error; + } + + return 0; + +error: + __rproc_virtio_del_vqs(vdev); + return ret; +} + +static u8 rproc_virtio_get_status(struct virtio_device *vdev) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + + return rsc->status; +} + +static void rproc_virtio_set_status(struct virtio_device *vdev, u8 status) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + + rsc->status = status; + dev_dbg(&vdev->dev, "status: %d\n", status); +} + +static void rproc_virtio_reset(struct virtio_device *vdev) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + + rsc->status = 0; + dev_dbg(&vdev->dev, "reset !\n"); +} + +/* provide the vdev features as retrieved from the firmware */ +static u64 rproc_virtio_get_features(struct virtio_device *vdev) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + + return rsc->dfeatures; +} + +static int rproc_virtio_finalize_features(struct virtio_device *vdev) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + + /* Give virtio_ring a chance to accept features */ + vring_transport_features(vdev); + + /* Make sure we don't have any features > 32 bits! */ + BUG_ON((u32)vdev->features != vdev->features); + + /* + * Remember the finalized features of our vdev, and provide it + * to the remote processor once it is powered on. + */ + rsc->gfeatures = vdev->features; + + return 0; +} + +static void rproc_virtio_get(struct virtio_device *vdev, unsigned offset, + void *buf, unsigned len) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + void *cfg; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + cfg = &rsc->vring[rsc->num_of_vrings]; + + if (offset + len > rsc->config_len || offset + len < len) { + dev_err(&vdev->dev, "rproc_virtio_get: access out of bounds\n"); + return; + } + + memcpy(buf, cfg + offset, len); +} + +static void rproc_virtio_set(struct virtio_device *vdev, unsigned offset, + const void *buf, unsigned len) +{ + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct fw_rsc_vdev *rsc; + void *cfg; + + rsc = (void *)rvdev->rproc->table_ptr + rvdev->rsc_offset; + cfg = &rsc->vring[rsc->num_of_vrings]; + + if (offset + len > rsc->config_len || offset + len < len) { + dev_err(&vdev->dev, "rproc_virtio_set: access out of bounds\n"); + return; + } + + memcpy(cfg + offset, buf, len); +} + +static const struct virtio_config_ops rproc_virtio_config_ops = { + .get_features = rproc_virtio_get_features, + .finalize_features = rproc_virtio_finalize_features, + .find_vqs = rproc_virtio_find_vqs, + .del_vqs = rproc_virtio_del_vqs, + .reset = rproc_virtio_reset, + .set_status = rproc_virtio_set_status, + .get_status = rproc_virtio_get_status, + .get = rproc_virtio_get, + .set = rproc_virtio_set, +}; + +/* + * This function is called whenever vdev is released, and is responsible + * to decrement the remote processor's refcount which was taken when vdev was + * added. + * + * Never call this function directly; it will be called by the driver + * core when needed. + */ +static void rproc_vdev_release(struct device *dev) +{ + struct virtio_device *vdev = dev_to_virtio(dev); + struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); + struct rproc *rproc = vdev_to_rproc(vdev); + + list_del(&rvdev->node); + kfree(rvdev); + + put_device(&rproc->dev); +} + +/** + * rproc_add_virtio_dev() - register an rproc-induced virtio device + * @rvdev: the remote vdev + * + * This function registers a virtio device. This vdev's partent is + * the rproc device. + * + * Returns 0 on success or an appropriate error value otherwise. + */ +int rproc_add_virtio_dev(struct rproc_vdev *rvdev, int id) +{ + struct rproc *rproc = rvdev->rproc; + struct device *dev = &rproc->dev; + struct virtio_device *vdev = &rvdev->vdev; + int ret; + + vdev->id.device = id, + vdev->config = &rproc_virtio_config_ops, + vdev->dev.parent = dev; + vdev->dev.release = rproc_vdev_release; + + /* + * We're indirectly making a non-temporary copy of the rproc pointer + * here, because drivers probed with this vdev will indirectly + * access the wrapping rproc. + * + * Therefore we must increment the rproc refcount here, and decrement + * it _only_ when the vdev is released. + */ + get_device(&rproc->dev); + + ret = register_virtio_device(vdev); + if (ret) { + put_device(&rproc->dev); + dev_err(dev, "failed to register vdev: %d\n", ret); + goto out; + } + + dev_info(dev, "registered %s (type %d)\n", dev_name(&vdev->dev), id); + +out: + return ret; +} + +/** + * rproc_remove_virtio_dev() - remove an rproc-induced virtio device + * @rvdev: the remote vdev + * + * This function unregisters an existing virtio device. + */ +void rproc_remove_virtio_dev(struct rproc_vdev *rvdev) +{ + unregister_virtio_device(&rvdev->vdev); +} diff --git a/drivers/remoteproc/ste_modem_rproc.c b/drivers/remoteproc/ste_modem_rproc.c new file mode 100644 index 000000000..201cd8a97 --- /dev/null +++ b/drivers/remoteproc/ste_modem_rproc.c @@ -0,0 +1,342 @@ +/* + * Copyright (C) ST-Ericsson AB 2012 + * Author: Sjur Brændeland + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include +#include +#include "remoteproc_internal.h" + +#define SPROC_FW_SIZE (50 * 4096) +#define SPROC_MAX_TOC_ENTRIES 32 +#define SPROC_MAX_NOTIFY_ID 14 +#define SPROC_RESOURCE_NAME "rsc-table" +#define SPROC_MODEM_NAME "ste-modem" +/*(DEBLOBBED)*/ + +#define sproc_dbg(sproc, fmt, ...) \ + dev_dbg(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__) +#define sproc_err(sproc, fmt, ...) \ + dev_err(&sproc->mdev->pdev.dev, fmt, ##__VA_ARGS__) + +/* STE-modem control structure */ +struct sproc { + struct rproc *rproc; + struct ste_modem_device *mdev; + int error; + void *fw_addr; + size_t fw_size; + dma_addr_t fw_dma_addr; +}; + +/* STE-Modem firmware entry */ +struct ste_toc_entry { + __le32 start; + __le32 size; + __le32 flags; + __le32 entry_point; + __le32 load_addr; + char name[12]; +}; + +/* + * The Table Of Content is located at the start of the firmware image and + * at offset zero in the shared memory region. The resource table typically + * contains the initial boot image (boot strap) and other information elements + * such as remoteproc resource table. Each entry is identified by a unique + * name. + */ +struct ste_toc { + struct ste_toc_entry table[SPROC_MAX_TOC_ENTRIES]; +}; + +/* Loads the firmware to shared memory. */ +static int sproc_load_segments(struct rproc *rproc, const struct firmware *fw) +{ + struct sproc *sproc = rproc->priv; + + memcpy(sproc->fw_addr, fw->data, fw->size); + + return 0; +} + +/* Find the entry for resource table in the Table of Content */ +static const struct ste_toc_entry *sproc_find_rsc_entry(const void *data) +{ + int i; + const struct ste_toc *toc; + toc = data; + + /* Search the table for the resource table */ + for (i = 0; i < SPROC_MAX_TOC_ENTRIES && + toc->table[i].start != 0xffffffff; i++) { + if (!strncmp(toc->table[i].name, SPROC_RESOURCE_NAME, + sizeof(toc->table[i].name))) + return &toc->table[i]; + } + + return NULL; +} + +/* Find the resource table inside the remote processor's firmware. */ +static struct resource_table * +sproc_find_rsc_table(struct rproc *rproc, const struct firmware *fw, + int *tablesz) +{ + struct sproc *sproc = rproc->priv; + struct resource_table *table; + const struct ste_toc_entry *entry; + + if (!fw) + return NULL; + + entry = sproc_find_rsc_entry(fw->data); + if (!entry) { + sproc_err(sproc, "resource table not found in fw\n"); + return NULL; + } + + table = (void *)(fw->data + entry->start); + + /* sanity check size and offset of resource table */ + if (entry->start > SPROC_FW_SIZE || + entry->size > SPROC_FW_SIZE || + fw->size > SPROC_FW_SIZE || + entry->start + entry->size > fw->size || + sizeof(struct resource_table) > entry->size) { + sproc_err(sproc, "bad size of fw or resource table\n"); + return NULL; + } + + /* we don't support any version beyond the first */ + if (table->ver != 1) { + sproc_err(sproc, "unsupported fw ver: %d\n", table->ver); + return NULL; + } + + /* make sure reserved bytes are zeroes */ + if (table->reserved[0] || table->reserved[1]) { + sproc_err(sproc, "non zero reserved bytes\n"); + return NULL; + } + + /* make sure the offsets array isn't truncated */ + if (table->num > SPROC_MAX_TOC_ENTRIES || + table->num * sizeof(table->offset[0]) + + sizeof(struct resource_table) > entry->size) { + sproc_err(sproc, "resource table incomplete\n"); + return NULL; + } + + /* If the fw size has grown, release the previous fw allocation */ + if (SPROC_FW_SIZE < fw->size) { + sproc_err(sproc, "Insufficient space for fw (%d < %zd)\n", + SPROC_FW_SIZE, fw->size); + return NULL; + } + + sproc->fw_size = fw->size; + *tablesz = entry->size; + + return table; +} + +/* Find the resource table inside the remote processor's firmware. */ +static struct resource_table * +sproc_find_loaded_rsc_table(struct rproc *rproc, const struct firmware *fw) +{ + struct sproc *sproc = rproc->priv; + const struct ste_toc_entry *entry; + + if (!fw || !sproc->fw_addr) + return NULL; + + entry = sproc_find_rsc_entry(sproc->fw_addr); + if (!entry) { + sproc_err(sproc, "resource table not found in fw\n"); + return NULL; + } + + return sproc->fw_addr + entry->start; +} + +/* STE modem firmware handler operations */ +static const struct rproc_fw_ops sproc_fw_ops = { + .load = sproc_load_segments, + .find_rsc_table = sproc_find_rsc_table, + .find_loaded_rsc_table = sproc_find_loaded_rsc_table, +}; + +/* Kick the modem with specified notification id */ +static void sproc_kick(struct rproc *rproc, int vqid) +{ + struct sproc *sproc = rproc->priv; + + sproc_dbg(sproc, "kick vqid:%d\n", vqid); + + /* + * We need different notification IDs for RX and TX so add + * an offset on TX notification IDs. + */ + sproc->mdev->ops.kick(sproc->mdev, vqid + SPROC_MAX_NOTIFY_ID); +} + +/* Received a kick from a modem, kick the virtqueue */ +static void sproc_kick_callback(struct ste_modem_device *mdev, int vqid) +{ + struct sproc *sproc = mdev->drv_data; + + if (rproc_vq_interrupt(sproc->rproc, vqid) == IRQ_NONE) + sproc_dbg(sproc, "no message was found in vqid %d\n", vqid); +} + +static struct ste_modem_dev_cb sproc_dev_cb = { + .kick = sproc_kick_callback, +}; + +/* Start the STE modem */ +static int sproc_start(struct rproc *rproc) +{ + struct sproc *sproc = rproc->priv; + int i, err; + + sproc_dbg(sproc, "start ste-modem\n"); + + /* Sanity test the max_notifyid */ + if (rproc->max_notifyid > SPROC_MAX_NOTIFY_ID) { + sproc_err(sproc, "Notification IDs too high:%d\n", + rproc->max_notifyid); + return -EINVAL; + } + + /* Subscribe to notifications */ + for (i = 0; i <= rproc->max_notifyid; i++) { + err = sproc->mdev->ops.kick_subscribe(sproc->mdev, i); + if (err) { + sproc_err(sproc, + "subscription of kicks failed:%d\n", err); + return err; + } + } + + /* Request modem start-up*/ + return sproc->mdev->ops.power(sproc->mdev, true); +} + +/* Stop the STE modem */ +static int sproc_stop(struct rproc *rproc) +{ + struct sproc *sproc = rproc->priv; + sproc_dbg(sproc, "stop ste-modem\n"); + + return sproc->mdev->ops.power(sproc->mdev, false); +} + +static struct rproc_ops sproc_ops = { + .start = sproc_start, + .stop = sproc_stop, + .kick = sproc_kick, +}; + +/* STE modem device is unregistered */ +static int sproc_drv_remove(struct platform_device *pdev) +{ + struct ste_modem_device *mdev = + container_of(pdev, struct ste_modem_device, pdev); + struct sproc *sproc = mdev->drv_data; + + sproc_dbg(sproc, "remove ste-modem\n"); + + /* Reset device callback functions */ + sproc->mdev->ops.setup(sproc->mdev, NULL); + + /* Unregister as remoteproc device */ + rproc_del(sproc->rproc); + dma_free_coherent(sproc->rproc->dev.parent, SPROC_FW_SIZE, + sproc->fw_addr, sproc->fw_dma_addr); + rproc_put(sproc->rproc); + + mdev->drv_data = NULL; + + return 0; +} + +/* Handle probe of a modem device */ +static int sproc_probe(struct platform_device *pdev) +{ + struct ste_modem_device *mdev = + container_of(pdev, struct ste_modem_device, pdev); + struct sproc *sproc; + struct rproc *rproc; + int err; + + dev_dbg(&mdev->pdev.dev, "probe ste-modem\n"); + + if (!mdev->ops.setup || !mdev->ops.kick || !mdev->ops.kick_subscribe || + !mdev->ops.power) { + dev_err(&mdev->pdev.dev, "invalid mdev ops\n"); + return -EINVAL; + } + + rproc = rproc_alloc(&mdev->pdev.dev, mdev->pdev.name, &sproc_ops, + "/*(DEBLOBBED)*/", sizeof(*sproc)); + if (!rproc) + return -ENOMEM; + + sproc = rproc->priv; + sproc->mdev = mdev; + sproc->rproc = rproc; + rproc->has_iommu = false; + mdev->drv_data = sproc; + + /* Provide callback functions to modem device */ + sproc->mdev->ops.setup(sproc->mdev, &sproc_dev_cb); + + /* Set the STE-modem specific firmware handler */ + rproc->fw_ops = &sproc_fw_ops; + + /* + * STE-modem requires the firmware to be located + * at the start of the shared memory region. So we need to + * reserve space for firmware at the start. + */ + sproc->fw_addr = dma_alloc_coherent(rproc->dev.parent, SPROC_FW_SIZE, + &sproc->fw_dma_addr, + GFP_KERNEL); + if (!sproc->fw_addr) { + sproc_err(sproc, "Cannot allocate memory for fw\n"); + err = -ENOMEM; + goto free_rproc; + } + + /* Register as a remoteproc device */ + err = rproc_add(rproc); + if (err) + goto free_mem; + + return 0; + +free_mem: + dma_free_coherent(rproc->dev.parent, SPROC_FW_SIZE, + sproc->fw_addr, sproc->fw_dma_addr); +free_rproc: + /* Reset device data upon error */ + mdev->drv_data = NULL; + rproc_put(rproc); + return err; +} + +static struct platform_driver sproc_driver = { + .driver = { + .name = SPROC_MODEM_NAME, + }, + .probe = sproc_probe, + .remove = sproc_drv_remove, +}; + +module_platform_driver(sproc_driver); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STE Modem driver using the Remote Processor Framework"); -- cgit v1.2.3-54-g00ecf