From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/scsi/hpsa.h | 569 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 569 insertions(+) create mode 100644 drivers/scsi/hpsa.h (limited to 'drivers/scsi/hpsa.h') diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h new file mode 100644 index 000000000..657713050 --- /dev/null +++ b/drivers/scsi/hpsa.h @@ -0,0 +1,569 @@ +/* + * Disk Array driver for HP Smart Array SAS controllers + * Copyright 2000, 2014 Hewlett-Packard Development Company, L.P. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * + */ +#ifndef HPSA_H +#define HPSA_H + +#include + +#define IO_OK 0 +#define IO_ERROR 1 + +struct ctlr_info; + +struct access_method { + void (*submit_command)(struct ctlr_info *h, + struct CommandList *c); + void (*set_intr_mask)(struct ctlr_info *h, unsigned long val); + bool (*intr_pending)(struct ctlr_info *h); + unsigned long (*command_completed)(struct ctlr_info *h, u8 q); +}; + +struct hpsa_scsi_dev_t { + int devtype; + int bus, target, lun; /* as presented to the OS */ + unsigned char scsi3addr[8]; /* as presented to the HW */ +#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" + unsigned char device_id[16]; /* from inquiry pg. 0x83 */ + unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ + unsigned char model[16]; /* bytes 16-31 of inquiry data */ + unsigned char raid_level; /* from inquiry page 0xC1 */ + unsigned char volume_offline; /* discovered via TUR or VPD */ + u16 queue_depth; /* max queue_depth for this device */ + atomic_t ioaccel_cmds_out; /* Only used for physical devices + * counts commands sent to physical + * device via "ioaccel" path. + */ + u32 ioaccel_handle; + int offload_config; /* I/O accel RAID offload configured */ + int offload_enabled; /* I/O accel RAID offload enabled */ + int offload_to_mirror; /* Send next I/O accelerator RAID + * offload request to mirror drive + */ + struct raid_map_data raid_map; /* I/O accelerator RAID map */ + + /* + * Pointers from logical drive map indices to the phys drives that + * make those logical drives. Note, multiple logical drives may + * share physical drives. You can have for instance 5 physical + * drives with 3 logical drives each using those same 5 physical + * disks. We need these pointers for counting i/o's out to physical + * devices in order to honor physical device queue depth limits. + */ + struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES]; +}; + +struct reply_queue_buffer { + u64 *head; + size_t size; + u8 wraparound; + u32 current_entry; + dma_addr_t busaddr; +}; + +#pragma pack(1) +struct bmic_controller_parameters { + u8 led_flags; + u8 enable_command_list_verification; + u8 backed_out_write_drives; + u16 stripes_for_parity; + u8 parity_distribution_mode_flags; + u16 max_driver_requests; + u16 elevator_trend_count; + u8 disable_elevator; + u8 force_scan_complete; + u8 scsi_transfer_mode; + u8 force_narrow; + u8 rebuild_priority; + u8 expand_priority; + u8 host_sdb_asic_fix; + u8 pdpi_burst_from_host_disabled; + char software_name[64]; + char hardware_name[32]; + u8 bridge_revision; + u8 snapshot_priority; + u32 os_specific; + u8 post_prompt_timeout; + u8 automatic_drive_slamming; + u8 reserved1; + u8 nvram_flags; +#define HBA_MODE_ENABLED_FLAG (1 << 3) + u8 cache_nvram_flags; + u8 drive_config_flags; + u16 reserved2; + u8 temp_warning_level; + u8 temp_shutdown_level; + u8 temp_condition_reset; + u8 max_coalesce_commands; + u32 max_coalesce_delay; + u8 orca_password[4]; + u8 access_id[16]; + u8 reserved[356]; +}; +#pragma pack() + +struct ctlr_info { + int ctlr; + char devname[8]; + char *product_name; + struct pci_dev *pdev; + u32 board_id; + void __iomem *vaddr; + unsigned long paddr; + int nr_cmds; /* Number of commands allowed on this controller */ +#define HPSA_CMDS_RESERVED_FOR_ABORTS 2 +#define HPSA_CMDS_RESERVED_FOR_DRIVER 1 + struct CfgTable __iomem *cfgtable; + int interrupts_enabled; + int max_commands; + int last_allocation; + atomic_t commands_outstanding; +# define PERF_MODE_INT 0 +# define DOORBELL_INT 1 +# define SIMPLE_MODE_INT 2 +# define MEMQ_MODE_INT 3 + unsigned int intr[MAX_REPLY_QUEUES]; + unsigned int msix_vector; + unsigned int msi_vector; + int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */ + struct access_method access; + char hba_mode_enabled; + + /* queue and queue Info */ + unsigned int Qdepth; + unsigned int maxSG; + spinlock_t lock; + int maxsgentries; + u8 max_cmd_sg_entries; + int chainsize; + struct SGDescriptor **cmd_sg_list; + + /* pointers to command and error info pool */ + struct CommandList *cmd_pool; + dma_addr_t cmd_pool_dhandle; + struct io_accel1_cmd *ioaccel_cmd_pool; + dma_addr_t ioaccel_cmd_pool_dhandle; + struct io_accel2_cmd *ioaccel2_cmd_pool; + dma_addr_t ioaccel2_cmd_pool_dhandle; + struct ErrorInfo *errinfo_pool; + dma_addr_t errinfo_pool_dhandle; + unsigned long *cmd_pool_bits; + int scan_finished; + spinlock_t scan_lock; + wait_queue_head_t scan_wait_queue; + + struct Scsi_Host *scsi_host; + spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */ + int ndevices; /* number of used elements in .dev[] array. */ + struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES]; + /* + * Performant mode tables. + */ + u32 trans_support; + u32 trans_offset; + struct TransTable_struct __iomem *transtable; + unsigned long transMethod; + + /* cap concurrent passthrus at some reasonable maximum */ +#define HPSA_MAX_CONCURRENT_PASSTHRUS (10) + atomic_t passthru_cmds_avail; + + /* + * Performant mode completion buffers + */ + size_t reply_queue_size; + struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES]; + u8 nreply_queues; + u32 *blockFetchTable; + u32 *ioaccel1_blockFetchTable; + u32 *ioaccel2_blockFetchTable; + u32 __iomem *ioaccel2_bft2_regs; + unsigned char *hba_inquiry_data; + u32 driver_support; + u32 fw_support; + int ioaccel_support; + int ioaccel_maxsg; + u64 last_intr_timestamp; + u32 last_heartbeat; + u64 last_heartbeat_timestamp; + u32 heartbeat_sample_interval; + atomic_t firmware_flash_in_progress; + u32 __percpu *lockup_detected; + struct delayed_work monitor_ctlr_work; + struct delayed_work rescan_ctlr_work; + int remove_in_progress; + /* Address of h->q[x] is passed to intr handler to know which queue */ + u8 q[MAX_REPLY_QUEUES]; + u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */ +#define HPSATMF_BITS_SUPPORTED (1 << 0) +#define HPSATMF_PHYS_LUN_RESET (1 << 1) +#define HPSATMF_PHYS_NEX_RESET (1 << 2) +#define HPSATMF_PHYS_TASK_ABORT (1 << 3) +#define HPSATMF_PHYS_TSET_ABORT (1 << 4) +#define HPSATMF_PHYS_CLEAR_ACA (1 << 5) +#define HPSATMF_PHYS_CLEAR_TSET (1 << 6) +#define HPSATMF_PHYS_QRY_TASK (1 << 7) +#define HPSATMF_PHYS_QRY_TSET (1 << 8) +#define HPSATMF_PHYS_QRY_ASYNC (1 << 9) +#define HPSATMF_MASK_SUPPORTED (1 << 16) +#define HPSATMF_LOG_LUN_RESET (1 << 17) +#define HPSATMF_LOG_NEX_RESET (1 << 18) +#define HPSATMF_LOG_TASK_ABORT (1 << 19) +#define HPSATMF_LOG_TSET_ABORT (1 << 20) +#define HPSATMF_LOG_CLEAR_ACA (1 << 21) +#define HPSATMF_LOG_CLEAR_TSET (1 << 22) +#define HPSATMF_LOG_QRY_TASK (1 << 23) +#define HPSATMF_LOG_QRY_TSET (1 << 24) +#define HPSATMF_LOG_QRY_ASYNC (1 << 25) + u32 events; +#define CTLR_STATE_CHANGE_EVENT (1 << 0) +#define CTLR_ENCLOSURE_HOT_PLUG_EVENT (1 << 1) +#define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV (1 << 4) +#define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV (1 << 5) +#define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL (1 << 6) +#define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED (1 << 30) +#define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE (1 << 31) + +#define RESCAN_REQUIRED_EVENT_BITS \ + (CTLR_ENCLOSURE_HOT_PLUG_EVENT | \ + CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \ + CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \ + CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \ + CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE) + spinlock_t offline_device_lock; + struct list_head offline_device_list; + int acciopath_status; + int raid_offload_debug; + struct workqueue_struct *resubmit_wq; + struct workqueue_struct *rescan_ctlr_wq; +}; + +struct offline_device_entry { + unsigned char scsi3addr[8]; + struct list_head offline_list; +}; + +#define HPSA_ABORT_MSG 0 +#define HPSA_DEVICE_RESET_MSG 1 +#define HPSA_RESET_TYPE_CONTROLLER 0x00 +#define HPSA_RESET_TYPE_BUS 0x01 +#define HPSA_RESET_TYPE_TARGET 0x03 +#define HPSA_RESET_TYPE_LUN 0x04 +#define HPSA_MSG_SEND_RETRY_LIMIT 10 +#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000) + +/* Maximum time in seconds driver will wait for command completions + * when polling before giving up. + */ +#define HPSA_MAX_POLL_TIME_SECS (20) + +/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines + * how many times to retry TEST UNIT READY on a device + * while waiting for it to become ready before giving up. + * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval + * between sending TURs while waiting for a device + * to become ready. + */ +#define HPSA_TUR_RETRY_LIMIT (20) +#define HPSA_MAX_WAIT_INTERVAL_SECS (30) + +/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board + * to become ready, in seconds, before giving up on it. + * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait + * between polling the board to see if it is ready, in + * milliseconds. HPSA_BOARD_READY_POLL_INTERVAL and + * HPSA_BOARD_READY_ITERATIONS are derived from those. + */ +#define HPSA_BOARD_READY_WAIT_SECS (120) +#define HPSA_BOARD_NOT_READY_WAIT_SECS (100) +#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100) +#define HPSA_BOARD_READY_POLL_INTERVAL \ + ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000) +#define HPSA_BOARD_READY_ITERATIONS \ + ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \ + HPSA_BOARD_READY_POLL_INTERVAL_MSECS) +#define HPSA_BOARD_NOT_READY_ITERATIONS \ + ((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \ + HPSA_BOARD_READY_POLL_INTERVAL_MSECS) +#define HPSA_POST_RESET_PAUSE_MSECS (3000) +#define HPSA_POST_RESET_NOOP_RETRIES (12) + +/* Defining the diffent access_menthods */ +/* + * Memory mapped FIFO interface (SMART 53xx cards) + */ +#define SA5_DOORBELL 0x20 +#define SA5_REQUEST_PORT_OFFSET 0x40 +#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0 +#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4 +#define SA5_REPLY_INTR_MASK_OFFSET 0x34 +#define SA5_REPLY_PORT_OFFSET 0x44 +#define SA5_INTR_STATUS 0x30 +#define SA5_SCRATCHPAD_OFFSET 0xB0 + +#define SA5_CTCFG_OFFSET 0xB4 +#define SA5_CTMEM_OFFSET 0xB8 + +#define SA5_INTR_OFF 0x08 +#define SA5B_INTR_OFF 0x04 +#define SA5_INTR_PENDING 0x08 +#define SA5B_INTR_PENDING 0x04 +#define FIFO_EMPTY 0xffffffff +#define HPSA_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */ + +#define HPSA_ERROR_BIT 0x02 + +/* Performant mode flags */ +#define SA5_PERF_INTR_PENDING 0x04 +#define SA5_PERF_INTR_OFF 0x05 +#define SA5_OUTDB_STATUS_PERF_BIT 0x01 +#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 +#define SA5_OUTDB_CLEAR 0xA0 +#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 +#define SA5_OUTDB_STATUS 0x9C + + +#define HPSA_INTR_ON 1 +#define HPSA_INTR_OFF 0 + +/* + * Inbound Post Queue offsets for IO Accelerator Mode 2 + */ +#define IOACCEL2_INBOUND_POSTQ_32 0x48 +#define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0 +#define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4 + +/* + Send the command to the hardware +*/ +static void SA5_submit_command(struct ctlr_info *h, + struct CommandList *c) +{ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); + (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); +} + +static void SA5_submit_command_no_read(struct ctlr_info *h, + struct CommandList *c) +{ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); +} + +static void SA5_submit_command_ioaccel2(struct ctlr_info *h, + struct CommandList *c) +{ + writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); +} + +/* + * This card is the opposite of the other cards. + * 0 turns interrupts on... + * 0x08 turns them off... + */ +static void SA5_intr_mask(struct ctlr_info *h, unsigned long val) +{ + if (val) { /* Turn interrupts on */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { /* Turn them off */ + h->interrupts_enabled = 0; + writel(SA5_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} + +static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val) +{ + if (val) { /* turn on interrupts */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { + h->interrupts_enabled = 0; + writel(SA5_PERF_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} + +static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q) +{ + struct reply_queue_buffer *rq = &h->reply_queue[q]; + unsigned long register_value = FIFO_EMPTY; + + /* msi auto clears the interrupt pending bit. */ + if (unlikely(!(h->msi_vector || h->msix_vector))) { + /* flush the controller write of the reply queue by reading + * outbound doorbell status register. + */ + (void) readl(h->vaddr + SA5_OUTDB_STATUS); + writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); + /* Do a read in order to flush the write to the controller + * (as per spec.) + */ + (void) readl(h->vaddr + SA5_OUTDB_STATUS); + } + + if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) { + register_value = rq->head[rq->current_entry]; + rq->current_entry++; + atomic_dec(&h->commands_outstanding); + } else { + register_value = FIFO_EMPTY; + } + /* Check for wraparound */ + if (rq->current_entry == h->max_commands) { + rq->current_entry = 0; + rq->wraparound ^= 1; + } + return register_value; +} + +/* + * returns value read from hardware. + * returns FIFO_EMPTY if there is nothing to read + */ +static unsigned long SA5_completed(struct ctlr_info *h, + __attribute__((unused)) u8 q) +{ + unsigned long register_value + = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); + + if (register_value != FIFO_EMPTY) + atomic_dec(&h->commands_outstanding); + +#ifdef HPSA_DEBUG + if (register_value != FIFO_EMPTY) + dev_dbg(&h->pdev->dev, "Read %lx back from board\n", + register_value); + else + dev_dbg(&h->pdev->dev, "FIFO Empty read\n"); +#endif + + return register_value; +} +/* + * Returns true if an interrupt is pending.. + */ +static bool SA5_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = + readl(h->vaddr + SA5_INTR_STATUS); + return register_value & SA5_INTR_PENDING; +} + +static bool SA5_performant_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); + + if (!register_value) + return false; + + /* Read outbound doorbell to flush */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + return register_value & SA5_OUTDB_STATUS_PERF_BIT; +} + +#define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT 0x100 + +static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); + + return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ? + true : false; +} + +#define IOACCEL_MODE1_REPLY_QUEUE_INDEX 0x1A0 +#define IOACCEL_MODE1_PRODUCER_INDEX 0x1B8 +#define IOACCEL_MODE1_CONSUMER_INDEX 0x1BC +#define IOACCEL_MODE1_REPLY_UNUSED 0xFFFFFFFFFFFFFFFFULL + +static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q) +{ + u64 register_value; + struct reply_queue_buffer *rq = &h->reply_queue[q]; + + BUG_ON(q >= h->nreply_queues); + + register_value = rq->head[rq->current_entry]; + if (register_value != IOACCEL_MODE1_REPLY_UNUSED) { + rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED; + if (++rq->current_entry == rq->size) + rq->current_entry = 0; + /* + * @todo + * + * Don't really need to write the new index after each command, + * but with current driver design this is easiest. + */ + wmb(); + writel((q << 24) | rq->current_entry, h->vaddr + + IOACCEL_MODE1_CONSUMER_INDEX); + atomic_dec(&h->commands_outstanding); + } + return (unsigned long) register_value; +} + +static struct access_method SA5_access = { + SA5_submit_command, + SA5_intr_mask, + SA5_intr_pending, + SA5_completed, +}; + +static struct access_method SA5_ioaccel_mode1_access = { + SA5_submit_command, + SA5_performant_intr_mask, + SA5_ioaccel_mode1_intr_pending, + SA5_ioaccel_mode1_completed, +}; + +static struct access_method SA5_ioaccel_mode2_access = { + SA5_submit_command_ioaccel2, + SA5_performant_intr_mask, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + +static struct access_method SA5_performant_access = { + SA5_submit_command, + SA5_performant_intr_mask, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + +static struct access_method SA5_performant_access_no_read = { + SA5_submit_command_no_read, + SA5_performant_intr_mask, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + +struct board_type { + u32 board_id; + char *product_name; + struct access_method *access; +}; + +#endif /* HPSA_H */ + -- cgit v1.2.3-54-g00ecf