From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/staging/rtl8192u/r819xU_phy.c | 1795 +++++++++++++++++++++++++++++++++ 1 file changed, 1795 insertions(+) create mode 100644 drivers/staging/rtl8192u/r819xU_phy.c (limited to 'drivers/staging/rtl8192u/r819xU_phy.c') diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c new file mode 100644 index 000000000..e5dbaca9e --- /dev/null +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -0,0 +1,1795 @@ +#include "r8192U.h" +#include "r8192U_hw.h" +#include "r819xU_phy.h" +#include "r819xU_phyreg.h" +#include "r8190_rtl8256.h" +#include "r8192U_dm.h" +#include "r819xU_firmware_img.h" + +#include "dot11d.h" +#include + +static u32 RF_CHANNEL_TABLE_ZEBRA[] = { + 0, + 0x085c, /* 2412 1 */ + 0x08dc, /* 2417 2 */ + 0x095c, /* 2422 3 */ + 0x09dc, /* 2427 4 */ + 0x0a5c, /* 2432 5 */ + 0x0adc, /* 2437 6 */ + 0x0b5c, /* 2442 7 */ + 0x0bdc, /* 2447 8 */ + 0x0c5c, /* 2452 9 */ + 0x0cdc, /* 2457 10 */ + 0x0d5c, /* 2462 11 */ + 0x0ddc, /* 2467 12 */ + 0x0e5c, /* 2472 13 */ + 0x0f72, /* 2484 */ +}; + + +#define rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray +#define rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG +#define rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array +#define rtl819XRadioA_Array Rtl8192UsbRadioA_Array +#define rtl819XRadioB_Array Rtl8192UsbRadioB_Array +#define rtl819XRadioC_Array Rtl8192UsbRadioC_Array +#define rtl819XRadioD_Array Rtl8192UsbRadioD_Array +#define rtl819XAGCTAB_Array Rtl8192UsbAGCTAB_Array + +/****************************************************************************** + * function: This function reads BB parameters from header file we generate, + * and does register read/write + * input: u32 bitmask //taget bit pos in the addr to be modified + * output: none + * return: u32 return the shift bit position of the mask + ******************************************************************************/ +static u32 rtl8192_CalculateBitShift(u32 bitmask) +{ + u32 i; + + i = ffs(bitmask) - 1; + return i; +} + +/****************************************************************************** + * function: This function checks different RF type to execute legal judgement. + * If RF Path is illegal, we will return false. + * input: net_device *dev + * u32 eRFPath + * output: none + * return: 0(illegal, false), 1(legal, true) + *****************************************************************************/ +u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath) +{ + u8 ret = 1; + struct r8192_priv *priv = ieee80211_priv(dev); + + if (priv->rf_type == RF_2T4R) { + ret = 0; + } else if (priv->rf_type == RF_1T2R) { + if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B) + ret = 1; + else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D) + ret = 0; + } + return ret; +} + +/****************************************************************************** + * function: This function sets specific bits to BB register + * input: net_device *dev + * u32 reg_addr //target addr to be modified + * u32 bitmask //taget bit pos to be modified + * u32 data //value to be write + * output: none + * return: none + * notice: + ******************************************************************************/ +void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr, u32 bitmask, + u32 data) +{ + + u32 reg, bitshift; + + if (bitmask != bMaskDWord) { + read_nic_dword(dev, reg_addr, ®); + bitshift = rtl8192_CalculateBitShift(bitmask); + reg &= ~bitmask; + reg |= data << bitshift; + write_nic_dword(dev, reg_addr, reg); + } else { + write_nic_dword(dev, reg_addr, data); + } +} + +/****************************************************************************** + * function: This function reads specific bits from BB register + * input: net_device *dev + * u32 reg_addr //target addr to be readback + * u32 bitmask //taget bit pos to be readback + * output: none + * return: u32 data //the readback register value + * notice: + ******************************************************************************/ +u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask) +{ + u32 reg, bitshift; + + read_nic_dword(dev, reg_addr, ®); + bitshift = rtl8192_CalculateBitShift(bitmask); + + return (reg & bitmask) >> bitshift; +} + +static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 offset); + +static void phy_FwRFSerialWrite(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 offset, + u32 data); + +/****************************************************************************** + * function: This function reads register from RF chip + * input: net_device *dev + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * u32 offset //target address to be read + * output: none + * return: u32 readback value + * notice: There are three types of serial operations: + * (1) Software serial write. + * (2)Hardware LSSI-Low Speed Serial Interface. + * (3)Hardware HSSI-High speed serial write. + * Driver here need to implement (1) and (2) + * ---need more spec for this information. + ******************************************************************************/ +static u32 rtl8192_phy_RFSerialRead(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 offset) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 ret = 0; + u32 new_offset = 0; + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + + rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0); + /* Make sure RF register offset is correct */ + offset &= 0x3f; + + /* Switch page for 8256 RF IC */ + if (priv->rf_chip == RF_8256) { + if (offset >= 31) { + priv->RfReg0Value[eRFPath] |= 0x140; + /* Switch to Reg_Mode2 for Reg 31-45 */ + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath]<<16); + /* Modify offset */ + new_offset = offset - 30; + } else if (offset >= 16) { + priv->RfReg0Value[eRFPath] |= 0x100; + priv->RfReg0Value[eRFPath] &= (~0x40); + /* Switch to Reg_Mode1 for Reg16-30 */ + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath]<<16); + + new_offset = offset - 15; + } else { + new_offset = offset; + } + } else { + RT_TRACE((COMP_PHY|COMP_ERR), + "check RF type here, need to be 8256\n"); + new_offset = offset; + } + /* Put desired read addr to LSSI control Register */ + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, + new_offset); + /* Issue a posedge trigger */ + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); + + + /* TODO: we should not delay such a long time. Ask for help from SD3 */ + usleep_range(1000, 1000); + + ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, + bLSSIReadBackData); + + + /* Switch back to Reg_Mode0 */ + if (priv->rf_chip == RF_8256) { + priv->RfReg0Value[eRFPath] &= 0xebf; + + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, + priv->RfReg0Value[eRFPath] << 16); + } + + return ret; +} + +/****************************************************************************** + * function: This function writes data to RF register + * input: net_device *dev + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * u32 offset //target address to be written + * u32 data //the new register data to be written + * output: none + * return: none + * notice: For RF8256 only. + * =========================================================================== + * Reg Mode RegCTL[1] RegCTL[0] Note + * (Reg00[12]) (Reg00[10]) + * =========================================================================== + * Reg_Mode0 0 x Reg 0 ~ 15(0x0 ~ 0xf) + * --------------------------------------------------------------------------- + * Reg_Mode1 1 0 Reg 16 ~ 30(0x1 ~ 0xf) + * --------------------------------------------------------------------------- + * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) + * --------------------------------------------------------------------------- + *****************************************************************************/ +static void rtl8192_phy_RFSerialWrite(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 offset, + u32 data) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 DataAndAddr = 0, new_offset = 0; + BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; + + offset &= 0x3f; + if (priv->rf_chip == RF_8256) { + + if (offset >= 31) { + priv->RfReg0Value[eRFPath] |= 0x140; + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath] << 16); + new_offset = offset - 30; + } else if (offset >= 16) { + priv->RfReg0Value[eRFPath] |= 0x100; + priv->RfReg0Value[eRFPath] &= (~0x40); + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath]<<16); + new_offset = offset - 15; + } else { + new_offset = offset; + } + } else { + RT_TRACE((COMP_PHY|COMP_ERR), + "check RF type here, need to be 8256\n"); + new_offset = offset; + } + + /* Put write addr in [5:0] and write data in [31:16] */ + DataAndAddr = (data<<16) | (new_offset&0x3f); + + /* Write operation */ + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); + + + if (offset == 0x0) + priv->RfReg0Value[eRFPath] = data; + + /* Switch back to Reg_Mode0 */ + if (priv->rf_chip == RF_8256) { + if (offset != 0) { + priv->RfReg0Value[eRFPath] &= 0xebf; + rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, + bMaskDWord, + priv->RfReg0Value[eRFPath] << 16); + } + } +} + +/****************************************************************************** + * function: This function set specific bits to RF register + * input: net_device dev + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * u32 reg_addr //target addr to be modified + * u32 bitmask //taget bit pos to be modified + * u32 data //value to be written + * output: none + * return: none + * notice: + *****************************************************************************/ +void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 reg_addr, u32 bitmask, u32 data) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 reg, bitshift; + + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + return; + + if (priv->Rf_Mode == RF_OP_By_FW) { + if (bitmask != bMask12Bits) { + /* RF data is 12 bits only */ + reg = phy_FwRFSerialRead(dev, eRFPath, reg_addr); + bitshift = rtl8192_CalculateBitShift(bitmask); + reg &= ~bitmask; + reg |= data << bitshift; + + phy_FwRFSerialWrite(dev, eRFPath, reg_addr, reg); + } else { + phy_FwRFSerialWrite(dev, eRFPath, reg_addr, data); + } + + udelay(200); + + } else { + if (bitmask != bMask12Bits) { + /* RF data is 12 bits only */ + reg = rtl8192_phy_RFSerialRead(dev, eRFPath, reg_addr); + bitshift = rtl8192_CalculateBitShift(bitmask); + reg &= ~bitmask; + reg |= data << bitshift; + + rtl8192_phy_RFSerialWrite(dev, eRFPath, reg_addr, reg); + } else { + rtl8192_phy_RFSerialWrite(dev, eRFPath, reg_addr, data); + } + } +} + +/****************************************************************************** + * function: This function reads specific bits from RF register + * input: net_device *dev + * u32 reg_addr //target addr to be readback + * u32 bitmask //taget bit pos to be readback + * output: none + * return: u32 data //the readback register value + * notice: + *****************************************************************************/ +u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 reg_addr, u32 bitmask) +{ + u32 reg, bitshift; + struct r8192_priv *priv = ieee80211_priv(dev); + + + if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) + return 0; + if (priv->Rf_Mode == RF_OP_By_FW) { + reg = phy_FwRFSerialRead(dev, eRFPath, reg_addr); + udelay(200); + } else { + reg = rtl8192_phy_RFSerialRead(dev, eRFPath, reg_addr); + } + bitshift = rtl8192_CalculateBitShift(bitmask); + reg = (reg & bitmask) >> bitshift; + return reg; + +} + +/****************************************************************************** + * function: We support firmware to execute RF-R/W. + * input: net_device *dev + * RF90_RADIO_PATH_E eRFPath + * u32 offset + * output: none + * return: u32 + * notice: + ****************************************************************************/ +static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 offset) +{ + u32 reg = 0; + u32 data = 0; + u8 time = 0; + u32 tmp; + + /* Firmware RF Write control. + * We can not execute the scheme in the initial step. + * Otherwise, RF-R/W will waste much time. + * This is only for site survey. */ + /* 1. Read operation need not insert data. bit 0-11 */ + /* 2. Write RF register address. bit 12-19 */ + data |= ((offset&0xFF)<<12); + /* 3. Write RF path. bit 20-21 */ + data |= ((eRFPath&0x3)<<20); + /* 4. Set RF read indicator. bit 22=0 */ + /* 5. Trigger Fw to operate the command. bit 31 */ + data |= 0x80000000; + /* 6. We can not execute read operation if bit 31 is 1. */ + read_nic_dword(dev, QPNR, &tmp); + while (tmp & 0x80000000) { + /* If FW can not finish RF-R/W for more than ?? times. + We must reset FW. */ + if (time++ < 100) { + udelay(10); + read_nic_dword(dev, QPNR, &tmp); + } else { + break; + } + } + /* 7. Execute read operation. */ + write_nic_dword(dev, QPNR, data); + /* 8. Check if firmware send back RF content. */ + read_nic_dword(dev, QPNR, &tmp); + while (tmp & 0x80000000) { + /* If FW can not finish RF-R/W for more than ?? times. + We must reset FW. */ + if (time++ < 100) { + udelay(10); + read_nic_dword(dev, QPNR, &tmp); + } else { + return 0; + } + } + read_nic_dword(dev, RF_DATA, ®); + + return reg; +} + +/****************************************************************************** + * function: We support firmware to execute RF-R/W. + * input: net_device *dev + * RF90_RADIO_PATH_E eRFPath + * u32 offset + * u32 data + * output: none + * return: none + * notice: + ****************************************************************************/ +static void phy_FwRFSerialWrite(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 offset, u32 data) +{ + u8 time = 0; + u32 tmp; + + /* Firmware RF Write control. + * We can not execute the scheme in the initial step. + * Otherwise, RF-R/W will waste much time. + * This is only for site survey. */ + + /* 1. Set driver write bit and 12 bit data. bit 0-11 */ + /* 2. Write RF register address. bit 12-19 */ + data |= ((offset&0xFF)<<12); + /* 3. Write RF path. bit 20-21 */ + data |= ((eRFPath&0x3)<<20); + /* 4. Set RF write indicator. bit 22=1 */ + data |= 0x400000; + /* 5. Trigger Fw to operate the command. bit 31=1 */ + data |= 0x80000000; + + /* 6. Write operation. We can not write if bit 31 is 1. */ + read_nic_dword(dev, QPNR, &tmp); + while (tmp & 0x80000000) { + /* If FW can not finish RF-R/W for more than ?? times. + We must reset FW. */ + if (time++ < 100) { + udelay(10); + read_nic_dword(dev, QPNR, &tmp); + } else { + break; + } + } + /* 7. No matter check bit. We always force the write. + Because FW will not accept the command. */ + write_nic_dword(dev, QPNR, data); + /* According to test, we must delay 20us to wait firmware + to finish RF write operation. */ + /* We support delay in firmware side now. */ +} + +/****************************************************************************** + * function: This function reads BB parameters from header file we generate, + * and do register read/write + * input: net_device *dev + * output: none + * return: none + * notice: BB parameters may change all the time, so please make + * sure it has been synced with the newest. + *****************************************************************************/ +void rtl8192_phy_configmac(struct net_device *dev) +{ + u32 dwArrayLen = 0, i; + u32 *pdwArray = NULL; + struct r8192_priv *priv = ieee80211_priv(dev); + + if (priv->btxpowerdata_readfromEEPORM) { + RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array_PG\n"); + dwArrayLen = MACPHY_Array_PGLength; + pdwArray = rtl819XMACPHY_Array_PG; + + } else { + RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array\n"); + dwArrayLen = MACPHY_ArrayLength; + pdwArray = rtl819XMACPHY_Array; + } + for (i = 0; i < dwArrayLen; i = i+3) { + if (pdwArray[i] == 0x318) + pdwArray[i+2] = 0x00000800; + + RT_TRACE(COMP_DBG, + "Rtl8190MACPHY_Array[0]=%x Rtl8190MACPHY_Array[1]=%x Rtl8190MACPHY_Array[2]=%x\n", + pdwArray[i], pdwArray[i+1], pdwArray[i+2]); + rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], + pdwArray[i+2]); + } +} + +/****************************************************************************** + * function: This function does dirty work + * input: net_device *dev + * u8 ConfigType + * output: none + * return: none + * notice: BB parameters may change all the time, so please make + * sure it has been synced with the newest. + *****************************************************************************/ +void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType) +{ + u32 i; + +#ifdef TO_DO_LIST + u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL; + + if (Adapter->bInHctTest) { + PHY_REGArrayLen = PHY_REGArrayLengthDTM; + AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM; + Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM; + Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM; + } +#endif + if (ConfigType == BaseBand_Config_PHY_REG) { + for (i = 0; i < PHY_REG_1T2RArrayLength; i += 2) { + rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], + bMaskDWord, + rtl819XPHY_REG_1T2RArray[i+1]); + RT_TRACE(COMP_DBG, + "i: %x, Rtl819xUsbPHY_REGArray[0]=%x Rtl819xUsbPHY_REGArray[1]=%x\n", + i, rtl819XPHY_REG_1T2RArray[i], + rtl819XPHY_REG_1T2RArray[i+1]); + } + } else if (ConfigType == BaseBand_Config_AGC_TAB) { + for (i = 0; i < AGCTAB_ArrayLength; i += 2) { + rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], + bMaskDWord, rtl819XAGCTAB_Array[i+1]); + RT_TRACE(COMP_DBG, + "i: %x, rtl819XAGCTAB_Array[0]=%x rtl819XAGCTAB_Array[1]=%x\n", + i, rtl819XAGCTAB_Array[i], + rtl819XAGCTAB_Array[i+1]); + } + } +} + +/****************************************************************************** + * function: This function initializes Register definition offset for + * Radio Path A/B/C/D + * input: net_device *dev + * output: none + * return: none + * notice: Initialization value here is constant and it should never + * be changed + *****************************************************************************/ +static void rtl8192_InitBBRFRegDef(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + /* RF Interface Software Control */ + /* 16 LSBs if read 32-bit from 0x870 */ + priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; + /* 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) */ + priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; + /* 16 LSBs if read 32-bit from 0x874 */ + priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW; + /* 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) */ + priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW; + + /* RF Interface Readback Value */ + /* 16 LSBs if read 32-bit from 0x8E0 */ + priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; + /* 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) */ + priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB; + /* 16 LSBs if read 32-bit from 0x8E4 */ + priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB; + /* 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) */ + priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB; + + /* RF Interface Output (and Enable) */ + /* 16 LSBs if read 32-bit from 0x860 */ + priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; + /* 16 LSBs if read 32-bit from 0x864 */ + priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; + /* 16 LSBs if read 32-bit from 0x868 */ + priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE; + /* 16 LSBs if read 32-bit from 0x86C */ + priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE; + + /* RF Interface (Output and) Enable */ + /* 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */ + priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; + /* 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) */ + priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; + /* 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) */ + priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE; + /* 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) */ + priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE; + + /* Addr of LSSI. Write RF register by driver */ + priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; + priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; + priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter; + priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter; + + /* RF parameter */ + /* BB Band Select */ + priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; + priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; + priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; + priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; + + /* Tx AGC Gain Stage (same for all path. Should we remove this?) */ + priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; + priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; + priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; + priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; + + /* Tranceiver A~D HSSI Parameter-1 */ + /* wire control parameter1 */ + priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; + priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; + priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; + priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; + + /* Tranceiver A~D HSSI Parameter-2 */ + /* wire control parameter2 */ + priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; + priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; + priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; + priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; + + /* RF Switch Control */ + /* TR/Ant switch control */ + priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; + priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; + priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; + priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; + + /* AGC control 1 */ + priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; + priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; + priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; + priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; + + /* AGC control 2 */ + priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; + priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; + priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; + priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; + + /* RX AFE control 1 */ + priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; + priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; + priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; + priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; + + /* RX AFE control 1 */ + priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE; + priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; + priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; + priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; + + /* Tx AFE control 1 */ + priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; + priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; + priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; + priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; + + /* Tx AFE control 2 */ + priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE; + priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; + priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; + priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; + + /* Tranceiver LSSI Readback */ + priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; + priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; +} + +/****************************************************************************** + * function: This function is to write register and then readback to make + * sure whether BB and RF is OK + * input: net_device *dev + * HW90_BLOCK_E CheckBlock + * RF90_RADIO_PATH_E eRFPath //only used when checkblock is + * //HW90_BLOCK_RF + * output: none + * return: return whether BB and RF is ok (0:OK, 1:Fail) + * notice: This function may be removed in the ASIC + ******************************************************************************/ +u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, + RF90_RADIO_PATH_E eRFPath) +{ + u8 ret = 0; + u32 i, CheckTimes = 4, reg = 0; + u32 WriteAddr[4]; + u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f}; + + /* Initialize register address offset to be checked */ + WriteAddr[HW90_BLOCK_MAC] = 0x100; + WriteAddr[HW90_BLOCK_PHY0] = 0x900; + WriteAddr[HW90_BLOCK_PHY1] = 0x800; + WriteAddr[HW90_BLOCK_RF] = 0x3; + RT_TRACE(COMP_PHY, "%s(), CheckBlock: %d\n", __func__, CheckBlock); + for (i = 0; i < CheckTimes; i++) { + + /* Write data to register and readback */ + switch (CheckBlock) { + case HW90_BLOCK_MAC: + RT_TRACE(COMP_ERR, + "PHY_CheckBBRFOK(): Never Write 0x100 here!\n"); + break; + + case HW90_BLOCK_PHY0: + case HW90_BLOCK_PHY1: + write_nic_dword(dev, WriteAddr[CheckBlock], + WriteData[i]); + read_nic_dword(dev, WriteAddr[CheckBlock], ®); + break; + + case HW90_BLOCK_RF: + WriteData[i] &= 0xfff; + rtl8192_phy_SetRFReg(dev, eRFPath, + WriteAddr[HW90_BLOCK_RF], + bMask12Bits, WriteData[i]); + /* TODO: we should not delay for such a long time. + Ask SD3 */ + usleep_range(1000, 1000); + reg = rtl8192_phy_QueryRFReg(dev, eRFPath, + WriteAddr[HW90_BLOCK_RF], + bMask12Bits); + usleep_range(1000, 1000); + break; + + default: + ret = 1; + break; + } + + + /* Check whether readback data is correct */ + if (reg != WriteData[i]) { + RT_TRACE((COMP_PHY|COMP_ERR), + "error reg: %x, WriteData: %x\n", + reg, WriteData[i]); + ret = 1; + break; + } + } + + return ret; +} + +/****************************************************************************** + * function: This function initializes BB&RF + * input: net_device *dev + * output: none + * return: none + * notice: Initialization value may change all the time, so please make + * sure it has been synced with the newest. + ******************************************************************************/ +static void rtl8192_BB_Config_ParaFile(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 reg_u8 = 0, eCheckItem = 0, status = 0; + u32 reg_u32 = 0; + + /************************************** + * <1> Initialize BaseBand + *************************************/ + + /* --set BB Global Reset-- */ + read_nic_byte(dev, BB_GLOBAL_RESET, ®_u8); + write_nic_byte(dev, BB_GLOBAL_RESET, (reg_u8|BB_GLOBAL_RESET_BIT)); + mdelay(50); + /* ---set BB reset Active--- */ + read_nic_dword(dev, CPU_GEN, ®_u32); + write_nic_dword(dev, CPU_GEN, (reg_u32&(~CPU_GEN_BB_RST))); + + /* ----Ckeck FPGAPHY0 and PHY1 board is OK---- */ + /* TODO: this function should be removed on ASIC */ + for (eCheckItem = (HW90_BLOCK_E)HW90_BLOCK_PHY0; + eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) { + /* don't care RF path */ + status = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, + (RF90_RADIO_PATH_E)0); + if (status != 0) { + RT_TRACE((COMP_ERR | COMP_PHY), + "PHY_RF8256_Config(): Check PHY%d Fail!!\n", + eCheckItem-1); + return; + } + } + /* ---- Set CCK and OFDM Block "OFF"---- */ + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0); + /* ----BB Register Initilazation---- */ + /* ==m==>Set PHY REG From Header<==m== */ + rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG); + + /* ----Set BB reset de-Active---- */ + read_nic_dword(dev, CPU_GEN, ®_u32); + write_nic_dword(dev, CPU_GEN, (reg_u32|CPU_GEN_BB_RST)); + + /* ----BB AGC table Initialization---- */ + /* ==m==>Set PHY REG From Header<==m== */ + rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB); + + /* ----Enable XSTAL ---- */ + write_nic_byte_E(dev, 0x5e, 0x00); + if (priv->card_8192_version == (u8)VERSION_819xU_A) { + /* Antenna gain offset from B/C/D to A */ + reg_u32 = priv->AntennaTxPwDiff[1]<<4 | + priv->AntennaTxPwDiff[0]; + rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), + reg_u32); + + /* XSTALLCap */ + reg_u32 = priv->CrystalCap & 0xf; + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, + reg_u32); + } + + /* Check if the CCK HighPower is turned ON. + This is used to calculate PWDB. */ + priv->bCckHighPower = (u8)rtl8192_QueryBBReg(dev, + rFPGA0_XA_HSSIParameter2, + 0x200); +} + +/****************************************************************************** + * function: This function initializes BB&RF + * input: net_device *dev + * output: none + * return: none + * notice: Initialization value may change all the time, so please make + * sure it has been synced with the newest. + *****************************************************************************/ +void rtl8192_BBConfig(struct net_device *dev) +{ + rtl8192_InitBBRFRegDef(dev); + /* config BB&RF. As hardCode based initialization has not been well + * implemented, so use file first. + * FIXME: should implement it for hardcode? */ + rtl8192_BB_Config_ParaFile(dev); +} + + +/****************************************************************************** + * function: This function obtains the initialization value of Tx power Level + * offset + * input: net_device *dev + * output: none + * return: none + *****************************************************************************/ +void rtl8192_phy_getTxPower(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 tmp; + + read_nic_dword(dev, rTxAGC_Rate18_06, + &priv->MCSTxPowerLevelOriginalOffset[0]); + read_nic_dword(dev, rTxAGC_Rate54_24, + &priv->MCSTxPowerLevelOriginalOffset[1]); + read_nic_dword(dev, rTxAGC_Mcs03_Mcs00, + &priv->MCSTxPowerLevelOriginalOffset[2]); + read_nic_dword(dev, rTxAGC_Mcs07_Mcs04, + &priv->MCSTxPowerLevelOriginalOffset[3]); + read_nic_dword(dev, rTxAGC_Mcs11_Mcs08, + &priv->MCSTxPowerLevelOriginalOffset[4]); + read_nic_dword(dev, rTxAGC_Mcs15_Mcs12, + &priv->MCSTxPowerLevelOriginalOffset[5]); + + /* Read rx initial gain */ + read_nic_byte(dev, rOFDM0_XAAGCCore1, &priv->DefaultInitialGain[0]); + read_nic_byte(dev, rOFDM0_XBAGCCore1, &priv->DefaultInitialGain[1]); + read_nic_byte(dev, rOFDM0_XCAGCCore1, &priv->DefaultInitialGain[2]); + read_nic_byte(dev, rOFDM0_XDAGCCore1, &priv->DefaultInitialGain[3]); + RT_TRACE(COMP_INIT, + "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n", + priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], + priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); + + /* Read framesync */ + read_nic_byte(dev, rOFDM0_RxDetector3, &priv->framesync); + read_nic_byte(dev, rOFDM0_RxDetector2, &tmp); + priv->framesyncC34 = tmp; + RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x\n", + rOFDM0_RxDetector3, priv->framesync); + + /* Read SIFS (save the value read fome MACPHY_REG.txt) */ + read_nic_word(dev, SIFS, &priv->SifsTime); +} + +/****************************************************************************** + * function: This function sets the initialization value of Tx power Level + * offset + * input: net_device *dev + * u8 channel + * output: none + * return: none + ******************************************************************************/ +void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; + u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; + + switch (priv->rf_chip) { + case RF_8256: + /* need further implement */ + PHY_SetRF8256CCKTxPower(dev, powerlevel); + PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); + break; + default: + RT_TRACE((COMP_PHY|COMP_ERR), + "error RF chipID(8225 or 8258) in function %s()\n", + __func__); + break; + } +} + +/****************************************************************************** + * function: This function checks Rf chip to do RF config + * input: net_device *dev + * output: none + * return: only 8256 is supported + ******************************************************************************/ +void rtl8192_phy_RFConfig(struct net_device *dev) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + switch (priv->rf_chip) { + case RF_8256: + PHY_RF8256_Config(dev); + break; + default: + RT_TRACE(COMP_ERR, "error chip id\n"); + break; + } +} + +/****************************************************************************** + * function: This function updates Initial gain + * input: net_device *dev + * output: none + * return: As Windows has not implemented this, wait for complement + ******************************************************************************/ +void rtl8192_phy_updateInitGain(struct net_device *dev) +{ +} + +/****************************************************************************** + * function: This function read RF parameters from general head file, + * and do RF 3-wire + * input: net_device *dev + * RF90_RADIO_PATH_E eRFPath + * output: none + * return: return code show if RF configuration is successful(0:pass, 1:fail) + * notice: Delay may be required for RF configuration + *****************************************************************************/ +u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath) +{ + + int i; + + switch (eRFPath) { + case RF90_PATH_A: + for (i = 0; i < RadioA_ArrayLength; i = i+2) { + + if (rtl819XRadioA_Array[i] == 0xfe) { + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioA_Array[i], + bMask12Bits, + rtl819XRadioA_Array[i+1]); + mdelay(1); + + } + break; + case RF90_PATH_B: + for (i = 0; i < RadioB_ArrayLength; i = i+2) { + + if (rtl819XRadioB_Array[i] == 0xfe) { + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioB_Array[i], + bMask12Bits, + rtl819XRadioB_Array[i+1]); + mdelay(1); + + } + break; + case RF90_PATH_C: + for (i = 0; i < RadioC_ArrayLength; i = i+2) { + + if (rtl819XRadioC_Array[i] == 0xfe) { + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioC_Array[i], + bMask12Bits, + rtl819XRadioC_Array[i+1]); + mdelay(1); + + } + break; + case RF90_PATH_D: + for (i = 0; i < RadioD_ArrayLength; i = i+2) { + + if (rtl819XRadioD_Array[i] == 0xfe) { + mdelay(100); + continue; + } + rtl8192_phy_SetRFReg(dev, eRFPath, + rtl819XRadioD_Array[i], + bMask12Bits, + rtl819XRadioD_Array[i+1]); + mdelay(1); + + } + break; + default: + break; + } + + return 0; + +} + +/****************************************************************************** + * function: This function sets Tx Power of the channel + * input: net_device *dev + * u8 channel + * output: none + * return: none + * notice: + ******************************************************************************/ +static void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; + u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; + + switch (priv->rf_chip) { + case RF_8225: +#ifdef TO_DO_LIST + PHY_SetRF8225CckTxPower(Adapter, powerlevel); + PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G); +#endif + break; + + case RF_8256: + PHY_SetRF8256CCKTxPower(dev, powerlevel); + PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); + break; + + case RF_8258: + break; + default: + RT_TRACE(COMP_ERR, "unknown rf chip ID in %s()\n", __func__); + break; + } +} + +/****************************************************************************** + * function: This function sets RF state on or off + * input: net_device *dev + * RT_RF_POWER_STATE eRFPowerState //Power State to set + * output: none + * return: none + * notice: + *****************************************************************************/ +bool rtl8192_SetRFPowerState(struct net_device *dev, + RT_RF_POWER_STATE eRFPowerState) +{ + bool bResult = true; + struct r8192_priv *priv = ieee80211_priv(dev); + + if (eRFPowerState == priv->ieee80211->eRFPowerState) + return false; + + if (priv->SetRFPowerStateInProgress) + return false; + + priv->SetRFPowerStateInProgress = true; + + switch (priv->rf_chip) { + case RF_8256: + switch (eRFPowerState) { + case eRfOn: + /* RF-A, RF-B */ + /* enable RF-Chip A/B - 0x860[4] */ + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, + 0x1); + /* analog to digital on - 0x88c[9:8] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, + 0x3); + /* digital to analog on - 0x880[4:3] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, + 0x3); + /* rx antenna on - 0xc04[1:0] */ + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3); + /* rx antenna on - 0xd04[1:0] */ + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3); + /* analog to digital part2 on - 0x880[6:5] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, + 0x3); + + break; + + case eRfSleep: + + break; + + case eRfOff: + /* RF-A, RF-B */ + /* disable RF-Chip A/B - 0x860[4] */ + rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, + 0x0); + /* analog to digital off, for power save */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, + 0x0); /* 0x88c[11:8] */ + /* digital to analog off, for power save - 0x880[4:3] */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, + 0x0); + /* rx antenna off - 0xc04[3:0] */ + rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0); + /* rx antenna off - 0xd04[3:0] */ + rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0); + /* analog to digital part2 off, for power save */ + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, + 0x0); /* 0x880[6:5] */ + + break; + + default: + bResult = false; + RT_TRACE(COMP_ERR, "%s(): unknown state to set: 0x%X\n", + __func__, eRFPowerState); + break; + } + break; + default: + RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip); + break; + } +#ifdef TO_DO_LIST + if (bResult) { + /* Update current RF state variable. */ + pHalData->eRFPowerState = eRFPowerState; + switch (pHalData->RFChipID) { + case RF_8256: + switch (pHalData->eRFPowerState) { + case eRfOff: + /* If Rf off reason is from IPS, + LED should blink with no link */ + if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS) + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); + else + /* Turn off LED if RF is not ON. */ + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); + break; + + case eRfOn: + /* Turn on RF we are still linked, which might + happen when we quickly turn off and on HW RF. + */ + if (pMgntInfo->bMediaConnect) + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); + else + /* Turn off LED if RF is not ON. */ + Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); + break; + + default: + break; + } + break; + + default: + RT_TRACE(COMP_RF, DBG_LOUD, "%s(): Unknown RF type\n", + __func__); + break; + } + + } +#endif + priv->SetRFPowerStateInProgress = false; + + return bResult; +} + +/****************************************************************************** + * function: This function sets command table variable (struct SwChnlCmd). + * input: SwChnlCmd *CmdTable //table to be set + * u32 CmdTableIdx //variable index in table to be set + * u32 CmdTableSz //table size + * SwChnlCmdID CmdID //command ID to set + * u32 Para1 + * u32 Para2 + * u32 msDelay + * output: + * return: true if finished, false otherwise + * notice: + ******************************************************************************/ +static u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx, + u32 CmdTableSz, SwChnlCmdID CmdID, + u32 Para1, u32 Para2, u32 msDelay) +{ + SwChnlCmd *pCmd; + + if (CmdTable == NULL) { + RT_TRACE(COMP_ERR, "%s(): CmdTable cannot be NULL\n", __func__); + return false; + } + if (CmdTableIdx >= CmdTableSz) { + RT_TRACE(COMP_ERR, "%s(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", + __func__, CmdTableIdx, CmdTableSz); + return false; + } + + pCmd = CmdTable + CmdTableIdx; + pCmd->CmdID = CmdID; + pCmd->Para1 = Para1; + pCmd->Para2 = Para2; + pCmd->msDelay = msDelay; + + return true; +} + +/****************************************************************************** + * function: This function sets channel step by step + * input: net_device *dev + * u8 channel + * u8 *stage //3 stages + * u8 *step + * u32 *delay //whether need to delay + * output: store new stage, step and delay for next step + * (combine with function above) + * return: true if finished, false otherwise + * notice: Wait for simpler function to replace it + *****************************************************************************/ +static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, + u8 *stage, u8 *step, u32 *delay) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; + u32 PreCommonCmdCnt; + SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; + u32 PostCommonCmdCnt; + SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; + u32 RfDependCmdCnt; + SwChnlCmd *CurrentCmd = NULL; + u8 eRFPath; + + RT_TRACE(COMP_CH, "%s() stage: %d, step: %d, channel: %d\n", + __func__, *stage, *step, channel); + if (!IsLegalChannel(priv->ieee80211, channel)) { + RT_TRACE(COMP_ERR, "set to illegal channel: %d\n", channel); + /* return true to tell upper caller function this channel + setting is finished! Or it will in while loop. */ + return true; + } + /* FIXME: need to check whether channel is legal or not here */ + + + /* <1> Fill up pre common command. */ + PreCommonCmdCnt = 0; + rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, + MAX_PRECMD_CNT, CmdID_SetTxPowerLevel, + 0, 0, 0); + rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, + MAX_PRECMD_CNT, CmdID_End, 0, 0, 0); + + /* <2> Fill up post common command. */ + PostCommonCmdCnt = 0; + + rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, + MAX_POSTCMD_CNT, CmdID_End, 0, 0, 0); + + /* <3> Fill up RF dependent command. */ + RfDependCmdCnt = 0; + switch (priv->rf_chip) { + case RF_8225: + if (!(channel >= 1 && channel <= 14)) { + RT_TRACE(COMP_ERR, + "illegal channel for Zebra 8225: %d\n", + channel); + return true; + } + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, + rZebra1_Channel, + RF_CHANNEL_TABLE_ZEBRA[channel], + 10); + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8256: + /* TEST!! This is not the table for 8256!! */ + if (!(channel >= 1 && channel <= 14)) { + RT_TRACE(COMP_ERR, + "illegal channel for Zebra 8256: %d\n", + channel); + return true; + } + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_RF_WriteReg, + rZebra1_Channel, channel, 10); + rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, + MAX_RFDEPENDCMD_CNT, + CmdID_End, 0, 0, 0); + break; + + case RF_8258: + break; + + default: + RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + return true; + } + + + do { + switch (*stage) { + case 0: + CurrentCmd = &PreCommonCmd[*step]; + break; + case 1: + CurrentCmd = &RfDependCmd[*step]; + break; + case 2: + CurrentCmd = &PostCommonCmd[*step]; + break; + } + + if (CurrentCmd->CmdID == CmdID_End) { + if ((*stage) == 2) { + (*delay) = CurrentCmd->msDelay; + return true; + } + (*stage)++; + (*step) = 0; + continue; + } + + switch (CurrentCmd->CmdID) { + case CmdID_SetTxPowerLevel: + if (priv->card_8192_version == (u8)VERSION_819xU_A) + /* consider it later! */ + rtl8192_SetTxPowerLevel(dev, channel); + break; + case CmdID_WritePortUlong: + write_nic_dword(dev, CurrentCmd->Para1, + CurrentCmd->Para2); + break; + case CmdID_WritePortUshort: + write_nic_word(dev, CurrentCmd->Para1, + (u16)CurrentCmd->Para2); + break; + case CmdID_WritePortUchar: + write_nic_byte(dev, CurrentCmd->Para1, + (u8)CurrentCmd->Para2); + break; + case CmdID_RF_WriteReg: + for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) { + rtl8192_phy_SetRFReg(dev, + (RF90_RADIO_PATH_E)eRFPath, + CurrentCmd->Para1, + bZebra1_ChannelNum, + CurrentCmd->Para2); + } + break; + default: + break; + } + + break; + } while (true); + + (*delay) = CurrentCmd->msDelay; + (*step)++; + return false; +} + +/****************************************************************************** + * function: This function does actually set channel work + * input: net_device *dev + * u8 channel + * output: none + * return: none + * notice: We should not call this function directly + *****************************************************************************/ +static void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + u32 delay = 0; + + while (!rtl8192_phy_SwChnlStepByStep(dev, channel, &priv->SwChnlStage, + &priv->SwChnlStep, &delay)) { + if (!priv->up) + break; + } +} + +/****************************************************************************** + * function: Callback routine of the work item for switch channel. + * input: net_device *dev + * + * output: none + * return: none + *****************************************************************************/ +void rtl8192_SwChnl_WorkItem(struct net_device *dev) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + + RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", + priv->chan); + + + rtl8192_phy_FinishSwChnlNow(dev, priv->chan); + + RT_TRACE(COMP_CH, "<== SwChnlCallback819xUsbWorkItem()\n"); +} + +/****************************************************************************** + * function: This function scheduled actual work item to set channel + * input: net_device *dev + * u8 channel //channel to set + * output: none + * return: return code show if workitem is scheduled (1:pass, 0:fail) + * notice: Delay may be required for RF configuration + ******************************************************************************/ +u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + RT_TRACE(COMP_CH, "%s(), SwChnlInProgress: %d\n", __func__, + priv->SwChnlInProgress); + if (!priv->up) + return false; + if (priv->SwChnlInProgress) + return false; + + /* -------------------------------------------- */ + switch (priv->ieee80211->mode) { + case WIRELESS_MODE_A: + case WIRELESS_MODE_N_5G: + if (channel <= 14) { + RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14\n"); + return false; + } + break; + case WIRELESS_MODE_B: + if (channel > 14) { + RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14\n"); + return false; + } + break; + case WIRELESS_MODE_G: + case WIRELESS_MODE_N_24G: + if (channel > 14) { + RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14\n"); + return false; + } + break; + } + /* -------------------------------------------- */ + + priv->SwChnlInProgress = true; + if (channel == 0) + channel = 1; + + priv->chan = channel; + + priv->SwChnlStage = 0; + priv->SwChnlStep = 0; + if (priv->up) + rtl8192_SwChnl_WorkItem(dev); + + priv->SwChnlInProgress = false; + return true; +} + +/****************************************************************************** + * function: Callback routine of the work item for set bandwidth mode. + * input: net_device *dev + * output: none + * return: none + * notice: I doubt whether SetBWModeInProgress flag is necessary as we can + * test whether current work in the queue or not.//do I? + *****************************************************************************/ +void rtl8192_SetBWModeWorkItem(struct net_device *dev) +{ + + struct r8192_priv *priv = ieee80211_priv(dev); + u8 regBwOpMode; + + RT_TRACE(COMP_SWBW, "%s() Switch to %s bandwidth\n", __func__, + priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"); + + + if (priv->rf_chip == RF_PSEUDO_11N) { + priv->SetBWModeInProgress = false; + return; + } + + /* <1> Set MAC register */ + read_nic_byte(dev, BW_OPMODE, ®BwOpMode); + + switch (priv->CurrentChannelBW) { + case HT_CHANNEL_WIDTH_20: + regBwOpMode |= BW_OPMODE_20MHZ; + /* We have not verify whether this register works */ + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + case HT_CHANNEL_WIDTH_20_40: + regBwOpMode &= ~BW_OPMODE_20MHZ; + /* We have not verify whether this register works */ + write_nic_byte(dev, BW_OPMODE, regBwOpMode); + break; + + default: + RT_TRACE(COMP_ERR, + "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n", + priv->CurrentChannelBW); + break; + } + + /* <2> Set PHY related register */ + switch (priv->CurrentChannelBW) { + case HT_CHANNEL_WIDTH_20: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, + 0x00100000, 1); + + /* Correct the tx power for CCK rate in 20M. */ + priv->cck_present_attentuation = + priv->cck_present_attentuation_20Mdefault + + priv->cck_present_attentuation_difference; + + if (priv->cck_present_attentuation > 22) + priv->cck_present_attentuation = 22; + if (priv->cck_present_attentuation < 0) + priv->cck_present_attentuation = 0; + RT_TRACE(COMP_INIT, + "20M, pHalData->CCKPresentAttentuation = %d\n", + priv->cck_present_attentuation); + + if (priv->chan == 14 && !priv->bcck_in_ch14) { + priv->bcck_in_ch14 = true; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else if (priv->chan != 14 && priv->bcck_in_ch14) { + priv->bcck_in_ch14 = false; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else { + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } + + break; + case HT_CHANNEL_WIDTH_20_40: + rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); + rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, + priv->nCur40MhzPrimeSC>>1); + rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); + rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, + priv->nCur40MhzPrimeSC); + priv->cck_present_attentuation = + priv->cck_present_attentuation_40Mdefault + + priv->cck_present_attentuation_difference; + + if (priv->cck_present_attentuation > 22) + priv->cck_present_attentuation = 22; + if (priv->cck_present_attentuation < 0) + priv->cck_present_attentuation = 0; + + RT_TRACE(COMP_INIT, + "40M, pHalData->CCKPresentAttentuation = %d\n", + priv->cck_present_attentuation); + if (priv->chan == 14 && !priv->bcck_in_ch14) { + priv->bcck_in_ch14 = true; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else if (priv->chan != 14 && priv->bcck_in_ch14) { + priv->bcck_in_ch14 = false; + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } else { + dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); + } + + break; + default: + RT_TRACE(COMP_ERR, + "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n", + priv->CurrentChannelBW); + break; + + } + /* Skip over setting of J-mode in BB register here. + Default value is "None J mode". */ + + /* <3> Set RF related register */ + switch (priv->rf_chip) { + case RF_8225: +#ifdef TO_DO_LIST + PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); +#endif + break; + + case RF_8256: + PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); + break; + + case RF_8258: + break; + + case RF_PSEUDO_11N: + break; + + default: + RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); + break; + } + priv->SetBWModeInProgress = false; + + RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d\n", + atomic_read(&priv->ieee80211->atm_swbw)); +} + +/****************************************************************************** + * function: This function schedules bandwidth switch work. + * input: struct net_deviceq *dev + * HT_CHANNEL_WIDTH bandwidth //20M or 40M + * HT_EXTCHNL_OFFSET offset //Upper, Lower, or Don't care + * output: none + * return: none + * notice: I doubt whether SetBWModeInProgress flag is necessary as we can + * test whether current work in the queue or not.//do I? + *****************************************************************************/ +void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH bandwidth, + HT_EXTCHNL_OFFSET offset) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + if (priv->SetBWModeInProgress) + return; + priv->SetBWModeInProgress = true; + + priv->CurrentChannelBW = bandwidth; + + if (offset == HT_EXTCHNL_OFFSET_LOWER) + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER; + else if (offset == HT_EXTCHNL_OFFSET_UPPER) + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER; + else + priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; + + rtl8192_SetBWModeWorkItem(dev); + +} + +void InitialGain819xUsb(struct net_device *dev, u8 Operation) +{ + struct r8192_priv *priv = ieee80211_priv(dev); + + priv->InitialGainOperateType = Operation; + + if (priv->up) + queue_delayed_work(priv->priv_wq, &priv->initialgain_operate_wq, 0); +} + +void InitialGainOperateWorkItemCallBack(struct work_struct *work) +{ + struct delayed_work *dwork = container_of(work, struct delayed_work, + work); + struct r8192_priv *priv = container_of(dwork, struct r8192_priv, + initialgain_operate_wq); + struct net_device *dev = priv->ieee80211->dev; +#define SCAN_RX_INITIAL_GAIN 0x17 +#define POWER_DETECTION_TH 0x08 + u32 bitmask; + u8 initial_gain; + u8 Operation; + + Operation = priv->InitialGainOperateType; + + switch (Operation) { + case IG_Backup: + RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); + initial_gain = SCAN_RX_INITIAL_GAIN; + bitmask = bMaskByte0; + if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + /* FW DIG OFF */ + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); + priv->initgain_backup.xaagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bitmask); + priv->initgain_backup.xbagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bitmask); + priv->initgain_backup.xcagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bitmask); + priv->initgain_backup.xdagccore1 = + (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bitmask); + bitmask = bMaskByte2; + priv->initgain_backup.cca = + (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bitmask); + + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n", + priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n", + priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n", + priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n", + priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n", + priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x\n", + initial_gain); + write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); + write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); + RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x\n", + POWER_DETECTION_TH); + write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH); + break; + case IG_Restore: + RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); + bitmask = 0x7f; /* Bit0 ~ Bit6 */ + if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + /* FW DIG OFF */ + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); + + rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bitmask, + (u32)priv->initgain_backup.xaagccore1); + rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bitmask, + (u32)priv->initgain_backup.xbagccore1); + rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bitmask, + (u32)priv->initgain_backup.xcagccore1); + rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, bitmask, + (u32)priv->initgain_backup.xdagccore1); + bitmask = bMaskByte2; + rtl8192_setBBreg(dev, rCCK0_CCA, bitmask, + (u32)priv->initgain_backup.cca); + + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n", + priv->initgain_backup.xaagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n", + priv->initgain_backup.xbagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n", + priv->initgain_backup.xcagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n", + priv->initgain_backup.xdagccore1); + RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n", + priv->initgain_backup.cca); + + rtl8192_phy_setTxPower(dev, priv->ieee80211->current_network.channel); + + if (dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) + /* FW DIG ON */ + rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); + break; + default: + RT_TRACE(COMP_SCAN, "Unknown IG Operation.\n"); + break; + } +} -- cgit v1.2.3-54-g00ecf