From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/target/target_core_spc.c | 1433 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1433 insertions(+) create mode 100644 drivers/target/target_core_spc.c (limited to 'drivers/target/target_core_spc.c') diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c new file mode 100644 index 000000000..7912aa124 --- /dev/null +++ b/drivers/target/target_core_spc.c @@ -0,0 +1,1433 @@ +/* + * SCSI Primary Commands (SPC) parsing and emulation. + * + * (c) Copyright 2002-2013 Datera, Inc. + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "target_core_internal.h" +#include "target_core_alua.h" +#include "target_core_pr.h" +#include "target_core_ua.h" +#include "target_core_xcopy.h" + +static void spc_fill_alua_data(struct se_port *port, unsigned char *buf) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + + /* + * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS. + */ + buf[5] = 0x80; + + /* + * Set TPGS field for explicit and/or implicit ALUA access type + * and opteration. + * + * See spc4r17 section 6.4.2 Table 135 + */ + if (!port) + return; + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!tg_pt_gp_mem) + return; + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if (tg_pt_gp) + buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type; + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); +} + +sense_reason_t +spc_emulate_inquiry_std(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_lun *lun = cmd->se_lun; + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + + /* Set RMB (removable media) for tape devices */ + if (dev->transport->get_device_type(dev) == TYPE_TAPE) + buf[1] = 0x80; + + buf[2] = 0x05; /* SPC-3 */ + + /* + * NORMACA and HISUP = 0, RESPONSE DATA FORMAT = 2 + * + * SPC4 says: + * A RESPONSE DATA FORMAT field set to 2h indicates that the + * standard INQUIRY data is in the format defined in this + * standard. Response data format values less than 2h are + * obsolete. Response data format values greater than 2h are + * reserved. + */ + buf[3] = 2; + + /* + * Enable SCCS and TPGS fields for Emulated ALUA + */ + spc_fill_alua_data(lun->lun_sep, buf); + + /* + * Set Third-Party Copy (3PC) bit to indicate support for EXTENDED_COPY + */ + if (dev->dev_attrib.emulate_3pc) + buf[5] |= 0x8; + /* + * Set Protection (PROTECT) bit when DIF has been enabled on the + * device, and the fabric supports VERIFY + PASS. Also report + * PROTECT=1 if sess_prot_type has been configured to allow T10-PI + * to unprotected devices. + */ + if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) { + if (dev->dev_attrib.pi_prot_type || cmd->se_sess->sess_prot_type) + buf[5] |= 0x1; + } + + buf[7] = 0x2; /* CmdQue=1 */ + + memcpy(&buf[8], "LIO-ORG ", 8); + memset(&buf[16], 0x20, 16); + memcpy(&buf[16], dev->t10_wwn.model, + min_t(size_t, strlen(dev->t10_wwn.model), 16)); + memcpy(&buf[32], dev->t10_wwn.revision, + min_t(size_t, strlen(dev->t10_wwn.revision), 4)); + buf[4] = 31; /* Set additional length to 31 */ + + return 0; +} +EXPORT_SYMBOL(spc_emulate_inquiry_std); + +/* unit serial number */ +static sense_reason_t +spc_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + u16 len; + + if (dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL) { + len = sprintf(&buf[4], "%s", dev->t10_wwn.unit_serial); + len++; /* Extra Byte for NULL Terminator */ + buf[3] = len; + } + return 0; +} + +void spc_parse_naa_6h_vendor_specific(struct se_device *dev, + unsigned char *buf) +{ + unsigned char *p = &dev->t10_wwn.unit_serial[0]; + int cnt; + bool next = true; + + /* + * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on + * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field + * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION + * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL + * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure + * per device uniqeness. + */ + for (cnt = 0; *p && cnt < 13; p++) { + int val = hex_to_bin(*p); + + if (val < 0) + continue; + + if (next) { + next = false; + buf[cnt++] |= val; + } else { + next = true; + buf[cnt] = val << 4; + } + } +} + +/* + * Device identification VPD, for a complete list of + * DESIGNATOR TYPEs see spc4r17 Table 459. + */ +sense_reason_t +spc_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + struct se_lun *lun = cmd->se_lun; + struct se_port *port = NULL; + struct se_portal_group *tpg = NULL; + struct t10_alua_lu_gp_member *lu_gp_mem; + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + unsigned char *prod = &dev->t10_wwn.model[0]; + u32 prod_len; + u32 unit_serial_len, off = 0; + u16 len = 0, id_len; + + off = 4; + + /* + * NAA IEEE Registered Extended Assigned designator format, see + * spc4r17 section 7.7.3.6.5 + * + * We depend upon a target_core_mod/ConfigFS provided + * /sys/kernel/config/target/core/$HBA/$DEV/wwn/vpd_unit_serial + * value in order to return the NAA id. + */ + if (!(dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL)) + goto check_t10_vend_desc; + + /* CODE SET == Binary */ + buf[off++] = 0x1; + + /* Set ASSOCIATION == addressed logical unit: 0)b */ + buf[off] = 0x00; + + /* Identifier/Designator type == NAA identifier */ + buf[off++] |= 0x3; + off++; + + /* Identifier/Designator length */ + buf[off++] = 0x10; + + /* + * Start NAA IEEE Registered Extended Identifier/Designator + */ + buf[off++] = (0x6 << 4); + + /* + * Use OpenFabrics IEEE Company ID: 00 14 05 + */ + buf[off++] = 0x01; + buf[off++] = 0x40; + buf[off] = (0x5 << 4); + + /* + * Return ConfigFS Unit Serial Number information for + * VENDOR_SPECIFIC_IDENTIFIER and + * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION + */ + spc_parse_naa_6h_vendor_specific(dev, &buf[off]); + + len = 20; + off = (len + 4); + +check_t10_vend_desc: + /* + * T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4 + */ + id_len = 8; /* For Vendor field */ + prod_len = 4; /* For VPD Header */ + prod_len += 8; /* For Vendor field */ + prod_len += strlen(prod); + prod_len++; /* For : */ + + if (dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL) { + unit_serial_len = strlen(&dev->t10_wwn.unit_serial[0]); + unit_serial_len++; /* For NULL Terminator */ + + id_len += sprintf(&buf[off+12], "%s:%s", prod, + &dev->t10_wwn.unit_serial[0]); + } + buf[off] = 0x2; /* ASCII */ + buf[off+1] = 0x1; /* T10 Vendor ID */ + buf[off+2] = 0x0; + memcpy(&buf[off+4], "LIO-ORG", 8); + /* Extra Byte for NULL Terminator */ + id_len++; + /* Identifier Length */ + buf[off+3] = id_len; + /* Header size for Designation descriptor */ + len += (id_len + 4); + off += (id_len + 4); + /* + * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD + */ + port = lun->lun_sep; + if (port) { + struct t10_alua_lu_gp *lu_gp; + u32 padding, scsi_name_len, scsi_target_len; + u16 lu_gp_id = 0; + u16 tg_pt_gp_id = 0; + u16 tpgt; + + tpg = port->sep_tpg; + /* + * Relative target port identifer, see spc4r17 + * section 7.7.3.7 + * + * Get the PROTOCOL IDENTIFIER as defined by spc4r17 + * section 7.5.1 Table 362 + */ + buf[off] = + (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x1; /* CODE SET == Binary */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOCIATION == target port: 01b */ + buf[off] |= 0x10; + /* DESIGNATOR TYPE == Relative target port identifer */ + buf[off++] |= 0x4; + off++; /* Skip over Reserved */ + buf[off++] = 4; /* DESIGNATOR LENGTH */ + /* Skip over Obsolete field in RTPI payload + * in Table 472 */ + off += 2; + buf[off++] = ((port->sep_rtpi >> 8) & 0xff); + buf[off++] = (port->sep_rtpi & 0xff); + len += 8; /* Header size + Designation descriptor */ + /* + * Target port group identifier, see spc4r17 + * section 7.7.3.8 + * + * Get the PROTOCOL IDENTIFIER as defined by spc4r17 + * section 7.5.1 Table 362 + */ + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!tg_pt_gp_mem) + goto check_lu_gp; + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if (!tg_pt_gp) { + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + goto check_lu_gp; + } + tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id; + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + + buf[off] = + (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x1; /* CODE SET == Binary */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOCIATION == target port: 01b */ + buf[off] |= 0x10; + /* DESIGNATOR TYPE == Target port group identifier */ + buf[off++] |= 0x5; + off++; /* Skip over Reserved */ + buf[off++] = 4; /* DESIGNATOR LENGTH */ + off += 2; /* Skip over Reserved Field */ + buf[off++] = ((tg_pt_gp_id >> 8) & 0xff); + buf[off++] = (tg_pt_gp_id & 0xff); + len += 8; /* Header size + Designation descriptor */ + /* + * Logical Unit Group identifier, see spc4r17 + * section 7.7.3.8 + */ +check_lu_gp: + lu_gp_mem = dev->dev_alua_lu_gp_mem; + if (!lu_gp_mem) + goto check_scsi_name; + + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + lu_gp = lu_gp_mem->lu_gp; + if (!lu_gp) { + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + goto check_scsi_name; + } + lu_gp_id = lu_gp->lu_gp_id; + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + buf[off++] |= 0x1; /* CODE SET == Binary */ + /* DESIGNATOR TYPE == Logical Unit Group identifier */ + buf[off++] |= 0x6; + off++; /* Skip over Reserved */ + buf[off++] = 4; /* DESIGNATOR LENGTH */ + off += 2; /* Skip over Reserved Field */ + buf[off++] = ((lu_gp_id >> 8) & 0xff); + buf[off++] = (lu_gp_id & 0xff); + len += 8; /* Header size + Designation descriptor */ + /* + * SCSI name string designator, see spc4r17 + * section 7.7.3.11 + * + * Get the PROTOCOL IDENTIFIER as defined by spc4r17 + * section 7.5.1 Table 362 + */ +check_scsi_name: + buf[off] = + (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x3; /* CODE SET == UTF-8 */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOCIATION == target port: 01b */ + buf[off] |= 0x10; + /* DESIGNATOR TYPE == SCSI name string */ + buf[off++] |= 0x8; + off += 2; /* Skip over Reserved and length */ + /* + * SCSI name string identifer containing, $FABRIC_MOD + * dependent information. For LIO-Target and iSCSI + * Target Port, this means ",t,0x in + * UTF-8 encoding. + */ + tpgt = tpg->se_tpg_tfo->tpg_get_tag(tpg); + scsi_name_len = sprintf(&buf[off], "%s,t,0x%04x", + tpg->se_tpg_tfo->tpg_get_wwn(tpg), tpgt); + scsi_name_len += 1 /* Include NULL terminator */; + /* + * The null-terminated, null-padded (see 4.4.2) SCSI + * NAME STRING field contains a UTF-8 format string. + * The number of bytes in the SCSI NAME STRING field + * (i.e., the value in the DESIGNATOR LENGTH field) + * shall be no larger than 256 and shall be a multiple + * of four. + */ + padding = ((-scsi_name_len) & 3); + if (padding) + scsi_name_len += padding; + if (scsi_name_len > 256) + scsi_name_len = 256; + + buf[off-1] = scsi_name_len; + off += scsi_name_len; + /* Header size + Designation descriptor */ + len += (scsi_name_len + 4); + + /* + * Target device designator + */ + buf[off] = + (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x3; /* CODE SET == UTF-8 */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOCIATION == target device: 10b */ + buf[off] |= 0x20; + /* DESIGNATOR TYPE == SCSI name string */ + buf[off++] |= 0x8; + off += 2; /* Skip over Reserved and length */ + /* + * SCSI name string identifer containing, $FABRIC_MOD + * dependent information. For LIO-Target and iSCSI + * Target Port, this means "" in + * UTF-8 encoding. + */ + scsi_target_len = sprintf(&buf[off], "%s", + tpg->se_tpg_tfo->tpg_get_wwn(tpg)); + scsi_target_len += 1 /* Include NULL terminator */; + /* + * The null-terminated, null-padded (see 4.4.2) SCSI + * NAME STRING field contains a UTF-8 format string. + * The number of bytes in the SCSI NAME STRING field + * (i.e., the value in the DESIGNATOR LENGTH field) + * shall be no larger than 256 and shall be a multiple + * of four. + */ + padding = ((-scsi_target_len) & 3); + if (padding) + scsi_target_len += padding; + if (scsi_target_len > 256) + scsi_target_len = 256; + + buf[off-1] = scsi_target_len; + off += scsi_target_len; + + /* Header size + Designation descriptor */ + len += (scsi_target_len + 4); + } + buf[2] = ((len >> 8) & 0xff); + buf[3] = (len & 0xff); /* Page Length for VPD 0x83 */ + return 0; +} +EXPORT_SYMBOL(spc_emulate_evpd_83); + +/* Extended INQUIRY Data VPD Page */ +static sense_reason_t +spc_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + + buf[3] = 0x3c; + /* + * Set GRD_CHK + REF_CHK for TYPE1 protection, or GRD_CHK + * only for TYPE3 protection. + */ + if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) { + if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT || + cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE1_PROT) + buf[4] = 0x5; + else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT || + cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT) + buf[4] = 0x4; + } + + /* Set HEADSUP, ORDSUP, SIMPSUP */ + buf[5] = 0x07; + + /* If WriteCache emulation is enabled, set V_SUP */ + if (se_dev_check_wce(dev)) + buf[6] = 0x01; + /* If an LBA map is present set R_SUP */ + spin_lock(&cmd->se_dev->t10_alua.lba_map_lock); + if (!list_empty(&dev->t10_alua.lba_map_list)) + buf[8] = 0x10; + spin_unlock(&cmd->se_dev->t10_alua.lba_map_lock); + return 0; +} + +/* Block Limits VPD page */ +static sense_reason_t +spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + int have_tp = 0; + int opt, min; + + /* + * Following spc3r22 section 6.5.3 Block Limits VPD page, when + * emulate_tpu=1 or emulate_tpws=1 we will be expect a + * different page length for Thin Provisioning. + */ + if (dev->dev_attrib.emulate_tpu || dev->dev_attrib.emulate_tpws) + have_tp = 1; + + buf[0] = dev->transport->get_device_type(dev); + buf[3] = have_tp ? 0x3c : 0x10; + + /* Set WSNZ to 1 */ + buf[4] = 0x01; + /* + * Set MAXIMUM COMPARE AND WRITE LENGTH + */ + if (dev->dev_attrib.emulate_caw) + buf[5] = 0x01; + + /* + * Set OPTIMAL TRANSFER LENGTH GRANULARITY + */ + if (dev->transport->get_io_min && (min = dev->transport->get_io_min(dev))) + put_unaligned_be16(min / dev->dev_attrib.block_size, &buf[6]); + else + put_unaligned_be16(1, &buf[6]); + + /* + * Set MAXIMUM TRANSFER LENGTH + */ + put_unaligned_be32(dev->dev_attrib.hw_max_sectors, &buf[8]); + + /* + * Set OPTIMAL TRANSFER LENGTH + */ + if (dev->transport->get_io_opt && (opt = dev->transport->get_io_opt(dev))) + put_unaligned_be32(opt / dev->dev_attrib.block_size, &buf[12]); + else + put_unaligned_be32(dev->dev_attrib.optimal_sectors, &buf[12]); + + /* + * Exit now if we don't support TP. + */ + if (!have_tp) + goto max_write_same; + + /* + * Set MAXIMUM UNMAP LBA COUNT + */ + put_unaligned_be32(dev->dev_attrib.max_unmap_lba_count, &buf[20]); + + /* + * Set MAXIMUM UNMAP BLOCK DESCRIPTOR COUNT + */ + put_unaligned_be32(dev->dev_attrib.max_unmap_block_desc_count, + &buf[24]); + + /* + * Set OPTIMAL UNMAP GRANULARITY + */ + put_unaligned_be32(dev->dev_attrib.unmap_granularity, &buf[28]); + + /* + * UNMAP GRANULARITY ALIGNMENT + */ + put_unaligned_be32(dev->dev_attrib.unmap_granularity_alignment, + &buf[32]); + if (dev->dev_attrib.unmap_granularity_alignment != 0) + buf[32] |= 0x80; /* Set the UGAVALID bit */ + + /* + * MAXIMUM WRITE SAME LENGTH + */ +max_write_same: + put_unaligned_be64(dev->dev_attrib.max_write_same_len, &buf[36]); + + return 0; +} + +/* Block Device Characteristics VPD page */ +static sense_reason_t +spc_emulate_evpd_b1(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + + buf[0] = dev->transport->get_device_type(dev); + buf[3] = 0x3c; + buf[5] = dev->dev_attrib.is_nonrot ? 1 : 0; + + return 0; +} + +/* Thin Provisioning VPD */ +static sense_reason_t +spc_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + + /* + * From spc3r22 section 6.5.4 Thin Provisioning VPD page: + * + * The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to + * zero, then the page length shall be set to 0004h. If the DP bit + * is set to one, then the page length shall be set to the value + * defined in table 162. + */ + buf[0] = dev->transport->get_device_type(dev); + + /* + * Set Hardcoded length mentioned above for DP=0 + */ + put_unaligned_be16(0x0004, &buf[2]); + + /* + * The THRESHOLD EXPONENT field indicates the threshold set size in + * LBAs as a power of 2 (i.e., the threshold set size is equal to + * 2(threshold exponent)). + * + * Note that this is currently set to 0x00 as mkp says it will be + * changing again. We can enable this once it has settled in T10 + * and is actually used by Linux/SCSI ML code. + */ + buf[4] = 0x00; + + /* + * A TPU bit set to one indicates that the device server supports + * the UNMAP command (see 5.25). A TPU bit set to zero indicates + * that the device server does not support the UNMAP command. + */ + if (dev->dev_attrib.emulate_tpu != 0) + buf[5] = 0x80; + + /* + * A TPWS bit set to one indicates that the device server supports + * the use of the WRITE SAME (16) command (see 5.42) to unmap LBAs. + * A TPWS bit set to zero indicates that the device server does not + * support the use of the WRITE SAME (16) command to unmap LBAs. + */ + if (dev->dev_attrib.emulate_tpws != 0) + buf[5] |= 0x40 | 0x20; + + return 0; +} + +/* Referrals VPD page */ +static sense_reason_t +spc_emulate_evpd_b3(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = cmd->se_dev; + + buf[0] = dev->transport->get_device_type(dev); + buf[3] = 0x0c; + put_unaligned_be32(dev->t10_alua.lba_map_segment_size, &buf[8]); + put_unaligned_be32(dev->t10_alua.lba_map_segment_multiplier, &buf[12]); + + return 0; +} + +static sense_reason_t +spc_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf); + +static struct { + uint8_t page; + sense_reason_t (*emulate)(struct se_cmd *, unsigned char *); +} evpd_handlers[] = { + { .page = 0x00, .emulate = spc_emulate_evpd_00 }, + { .page = 0x80, .emulate = spc_emulate_evpd_80 }, + { .page = 0x83, .emulate = spc_emulate_evpd_83 }, + { .page = 0x86, .emulate = spc_emulate_evpd_86 }, + { .page = 0xb0, .emulate = spc_emulate_evpd_b0 }, + { .page = 0xb1, .emulate = spc_emulate_evpd_b1 }, + { .page = 0xb2, .emulate = spc_emulate_evpd_b2 }, + { .page = 0xb3, .emulate = spc_emulate_evpd_b3 }, +}; + +/* supported vital product data pages */ +static sense_reason_t +spc_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf) +{ + int p; + + /* + * Only report the INQUIRY EVPD=1 pages after a valid NAA + * Registered Extended LUN WWN has been set via ConfigFS + * during device creation/restart. + */ + if (cmd->se_dev->dev_flags & DF_EMULATED_VPD_UNIT_SERIAL) { + buf[3] = ARRAY_SIZE(evpd_handlers); + for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) + buf[p + 4] = evpd_handlers[p].page; + } + + return 0; +} + +static sense_reason_t +spc_emulate_inquiry(struct se_cmd *cmd) +{ + struct se_device *dev = cmd->se_dev; + struct se_portal_group *tpg = cmd->se_lun->lun_sep->sep_tpg; + unsigned char *rbuf; + unsigned char *cdb = cmd->t_task_cdb; + unsigned char *buf; + sense_reason_t ret; + int p; + int len = 0; + + buf = kzalloc(SE_INQUIRY_BUF, GFP_KERNEL); + if (!buf) { + pr_err("Unable to allocate response buffer for INQUIRY\n"); + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + } + + if (dev == tpg->tpg_virt_lun0.lun_se_dev) + buf[0] = 0x3f; /* Not connected */ + else + buf[0] = dev->transport->get_device_type(dev); + + if (!(cdb[1] & 0x1)) { + if (cdb[2]) { + pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", + cdb[2]); + ret = TCM_INVALID_CDB_FIELD; + goto out; + } + + ret = spc_emulate_inquiry_std(cmd, buf); + len = buf[4] + 5; + goto out; + } + + for (p = 0; p < ARRAY_SIZE(evpd_handlers); ++p) { + if (cdb[2] == evpd_handlers[p].page) { + buf[1] = cdb[2]; + ret = evpd_handlers[p].emulate(cmd, buf); + len = get_unaligned_be16(&buf[2]) + 4; + goto out; + } + } + + pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); + ret = TCM_INVALID_CDB_FIELD; + +out: + rbuf = transport_kmap_data_sg(cmd); + if (rbuf) { + memcpy(rbuf, buf, min_t(u32, SE_INQUIRY_BUF, cmd->data_length)); + transport_kunmap_data_sg(cmd); + } + kfree(buf); + + if (!ret) + target_complete_cmd_with_length(cmd, GOOD, len); + return ret; +} + +static int spc_modesense_rwrecovery(struct se_cmd *cmd, u8 pc, u8 *p) +{ + p[0] = 0x01; + p[1] = 0x0a; + + /* No changeable values for now */ + if (pc == 1) + goto out; + +out: + return 12; +} + +static int spc_modesense_control(struct se_cmd *cmd, u8 pc, u8 *p) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + + p[0] = 0x0a; + p[1] = 0x0a; + + /* No changeable values for now */ + if (pc == 1) + goto out; + + p[2] = 2; + /* + * From spc4r23, 7.4.7 Control mode page + * + * The QUEUE ALGORITHM MODIFIER field (see table 368) specifies + * restrictions on the algorithm used for reordering commands + * having the SIMPLE task attribute (see SAM-4). + * + * Table 368 -- QUEUE ALGORITHM MODIFIER field + * Code Description + * 0h Restricted reordering + * 1h Unrestricted reordering allowed + * 2h to 7h Reserved + * 8h to Fh Vendor specific + * + * A value of zero in the QUEUE ALGORITHM MODIFIER field specifies that + * the device server shall order the processing sequence of commands + * having the SIMPLE task attribute such that data integrity is maintained + * for that I_T nexus (i.e., if the transmission of new SCSI transport protocol + * requests is halted at any time, the final value of all data observable + * on the medium shall be the same as if all the commands had been processed + * with the ORDERED task attribute). + * + * A value of one in the QUEUE ALGORITHM MODIFIER field specifies that the + * device server may reorder the processing sequence of commands having the + * SIMPLE task attribute in any manner. Any data integrity exposures related to + * command sequence order shall be explicitly handled by the application client + * through the selection of appropriate ommands and task attributes. + */ + p[3] = (dev->dev_attrib.emulate_rest_reord == 1) ? 0x00 : 0x10; + /* + * From spc4r17, section 7.4.6 Control mode Page + * + * Unit Attention interlocks control (UN_INTLCK_CTRL) to code 00b + * + * 00b: The logical unit shall clear any unit attention condition + * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION + * status and shall not establish a unit attention condition when a com- + * mand is completed with BUSY, TASK SET FULL, or RESERVATION CONFLICT + * status. + * + * 10b: The logical unit shall not clear any unit attention condition + * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION + * status and shall not establish a unit attention condition when + * a command is completed with BUSY, TASK SET FULL, or RESERVATION + * CONFLICT status. + * + * 11b a The logical unit shall not clear any unit attention condition + * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION + * status and shall establish a unit attention condition for the + * initiator port associated with the I_T nexus on which the BUSY, + * TASK SET FULL, or RESERVATION CONFLICT status is being returned. + * Depending on the status, the additional sense code shall be set to + * PREVIOUS BUSY STATUS, PREVIOUS TASK SET FULL STATUS, or PREVIOUS + * RESERVATION CONFLICT STATUS. Until it is cleared by a REQUEST SENSE + * command, a unit attention condition shall be established only once + * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless + * to the number of commands completed with one of those status codes. + */ + p[4] = (dev->dev_attrib.emulate_ua_intlck_ctrl == 2) ? 0x30 : + (dev->dev_attrib.emulate_ua_intlck_ctrl == 1) ? 0x20 : 0x00; + /* + * From spc4r17, section 7.4.6 Control mode Page + * + * Task Aborted Status (TAS) bit set to zero. + * + * A task aborted status (TAS) bit set to zero specifies that aborted + * tasks shall be terminated by the device server without any response + * to the application client. A TAS bit set to one specifies that tasks + * aborted by the actions of an I_T nexus other than the I_T nexus on + * which the command was received shall be completed with TASK ABORTED + * status (see SAM-4). + */ + p[5] = (dev->dev_attrib.emulate_tas) ? 0x40 : 0x00; + /* + * From spc4r30, section 7.5.7 Control mode page + * + * Application Tag Owner (ATO) bit set to one. + * + * If the ATO bit is set to one the device server shall not modify the + * LOGICAL BLOCK APPLICATION TAG field and, depending on the protection + * type, shall not modify the contents of the LOGICAL BLOCK REFERENCE + * TAG field. + */ + if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) { + if (dev->dev_attrib.pi_prot_type || sess->sess_prot_type) + p[5] |= 0x80; + } + + p[8] = 0xff; + p[9] = 0xff; + p[11] = 30; + +out: + return 12; +} + +static int spc_modesense_caching(struct se_cmd *cmd, u8 pc, u8 *p) +{ + struct se_device *dev = cmd->se_dev; + + p[0] = 0x08; + p[1] = 0x12; + + /* No changeable values for now */ + if (pc == 1) + goto out; + + if (se_dev_check_wce(dev)) + p[2] = 0x04; /* Write Cache Enable */ + p[12] = 0x20; /* Disabled Read Ahead */ + +out: + return 20; +} + +static int spc_modesense_informational_exceptions(struct se_cmd *cmd, u8 pc, unsigned char *p) +{ + p[0] = 0x1c; + p[1] = 0x0a; + + /* No changeable values for now */ + if (pc == 1) + goto out; + +out: + return 12; +} + +static struct { + uint8_t page; + uint8_t subpage; + int (*emulate)(struct se_cmd *, u8, unsigned char *); +} modesense_handlers[] = { + { .page = 0x01, .subpage = 0x00, .emulate = spc_modesense_rwrecovery }, + { .page = 0x08, .subpage = 0x00, .emulate = spc_modesense_caching }, + { .page = 0x0a, .subpage = 0x00, .emulate = spc_modesense_control }, + { .page = 0x1c, .subpage = 0x00, .emulate = spc_modesense_informational_exceptions }, +}; + +static void spc_modesense_write_protect(unsigned char *buf, int type) +{ + /* + * I believe that the WP bit (bit 7) in the mode header is the same for + * all device types.. + */ + switch (type) { + case TYPE_DISK: + case TYPE_TAPE: + default: + buf[0] |= 0x80; /* WP bit */ + break; + } +} + +static void spc_modesense_dpofua(unsigned char *buf, int type) +{ + switch (type) { + case TYPE_DISK: + buf[0] |= 0x10; /* DPOFUA bit */ + break; + default: + break; + } +} + +static int spc_modesense_blockdesc(unsigned char *buf, u64 blocks, u32 block_size) +{ + *buf++ = 8; + put_unaligned_be32(min(blocks, 0xffffffffull), buf); + buf += 4; + put_unaligned_be32(block_size, buf); + return 9; +} + +static int spc_modesense_long_blockdesc(unsigned char *buf, u64 blocks, u32 block_size) +{ + if (blocks <= 0xffffffff) + return spc_modesense_blockdesc(buf + 3, blocks, block_size) + 3; + + *buf++ = 1; /* LONGLBA */ + buf += 2; + *buf++ = 16; + put_unaligned_be64(blocks, buf); + buf += 12; + put_unaligned_be32(block_size, buf); + + return 17; +} + +static sense_reason_t spc_emulate_modesense(struct se_cmd *cmd) +{ + struct se_device *dev = cmd->se_dev; + char *cdb = cmd->t_task_cdb; + unsigned char buf[SE_MODE_PAGE_BUF], *rbuf; + int type = dev->transport->get_device_type(dev); + int ten = (cmd->t_task_cdb[0] == MODE_SENSE_10); + bool dbd = !!(cdb[1] & 0x08); + bool llba = ten ? !!(cdb[1] & 0x10) : false; + u8 pc = cdb[2] >> 6; + u8 page = cdb[2] & 0x3f; + u8 subpage = cdb[3]; + int length = 0; + int ret; + int i; + + memset(buf, 0, SE_MODE_PAGE_BUF); + + /* + * Skip over MODE DATA LENGTH + MEDIUM TYPE fields to byte 3 for + * MODE_SENSE_10 and byte 2 for MODE_SENSE (6). + */ + length = ten ? 3 : 2; + + /* DEVICE-SPECIFIC PARAMETER */ + if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || + (cmd->se_deve && + (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY))) + spc_modesense_write_protect(&buf[length], type); + + if ((se_dev_check_wce(dev)) && + (dev->dev_attrib.emulate_fua_write > 0)) + spc_modesense_dpofua(&buf[length], type); + + ++length; + + /* BLOCK DESCRIPTOR */ + + /* + * For now we only include a block descriptor for disk (SBC) + * devices; other command sets use a slightly different format. + */ + if (!dbd && type == TYPE_DISK) { + u64 blocks = dev->transport->get_blocks(dev); + u32 block_size = dev->dev_attrib.block_size; + + if (ten) { + if (llba) { + length += spc_modesense_long_blockdesc(&buf[length], + blocks, block_size); + } else { + length += 3; + length += spc_modesense_blockdesc(&buf[length], + blocks, block_size); + } + } else { + length += spc_modesense_blockdesc(&buf[length], blocks, + block_size); + } + } else { + if (ten) + length += 4; + else + length += 1; + } + + if (page == 0x3f) { + if (subpage != 0x00 && subpage != 0xff) { + pr_warn("MODE_SENSE: Invalid subpage code: 0x%02x\n", subpage); + return TCM_INVALID_CDB_FIELD; + } + + for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i) { + /* + * Tricky way to say all subpage 00h for + * subpage==0, all subpages for subpage==0xff + * (and we just checked above that those are + * the only two possibilities). + */ + if ((modesense_handlers[i].subpage & ~subpage) == 0) { + ret = modesense_handlers[i].emulate(cmd, pc, &buf[length]); + if (!ten && length + ret >= 255) + break; + length += ret; + } + } + + goto set_length; + } + + for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i) + if (modesense_handlers[i].page == page && + modesense_handlers[i].subpage == subpage) { + length += modesense_handlers[i].emulate(cmd, pc, &buf[length]); + goto set_length; + } + + /* + * We don't intend to implement: + * - obsolete page 03h "format parameters" (checked by Solaris) + */ + if (page != 0x03) + pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", + page, subpage); + + return TCM_UNKNOWN_MODE_PAGE; + +set_length: + if (ten) + put_unaligned_be16(length - 2, buf); + else + buf[0] = length - 1; + + rbuf = transport_kmap_data_sg(cmd); + if (rbuf) { + memcpy(rbuf, buf, min_t(u32, SE_MODE_PAGE_BUF, cmd->data_length)); + transport_kunmap_data_sg(cmd); + } + + target_complete_cmd_with_length(cmd, GOOD, length); + return 0; +} + +static sense_reason_t spc_emulate_modeselect(struct se_cmd *cmd) +{ + char *cdb = cmd->t_task_cdb; + bool ten = cdb[0] == MODE_SELECT_10; + int off = ten ? 8 : 4; + bool pf = !!(cdb[1] & 0x10); + u8 page, subpage; + unsigned char *buf; + unsigned char tbuf[SE_MODE_PAGE_BUF]; + int length; + sense_reason_t ret = 0; + int i; + + if (!cmd->data_length) { + target_complete_cmd(cmd, GOOD); + return 0; + } + + if (cmd->data_length < off + 2) + return TCM_PARAMETER_LIST_LENGTH_ERROR; + + buf = transport_kmap_data_sg(cmd); + if (!buf) + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + + if (!pf) { + ret = TCM_INVALID_CDB_FIELD; + goto out; + } + + page = buf[off] & 0x3f; + subpage = buf[off] & 0x40 ? buf[off + 1] : 0; + + for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i) + if (modesense_handlers[i].page == page && + modesense_handlers[i].subpage == subpage) { + memset(tbuf, 0, SE_MODE_PAGE_BUF); + length = modesense_handlers[i].emulate(cmd, 0, tbuf); + goto check_contents; + } + + ret = TCM_UNKNOWN_MODE_PAGE; + goto out; + +check_contents: + if (cmd->data_length < off + length) { + ret = TCM_PARAMETER_LIST_LENGTH_ERROR; + goto out; + } + + if (memcmp(buf + off, tbuf, length)) + ret = TCM_INVALID_PARAMETER_LIST; + +out: + transport_kunmap_data_sg(cmd); + + if (!ret) + target_complete_cmd(cmd, GOOD); + return ret; +} + +static sense_reason_t spc_emulate_request_sense(struct se_cmd *cmd) +{ + unsigned char *cdb = cmd->t_task_cdb; + unsigned char *rbuf; + u8 ua_asc = 0, ua_ascq = 0; + unsigned char buf[SE_SENSE_BUF]; + + memset(buf, 0, SE_SENSE_BUF); + + if (cdb[1] & 0x01) { + pr_err("REQUEST_SENSE description emulation not" + " supported\n"); + return TCM_INVALID_CDB_FIELD; + } + + rbuf = transport_kmap_data_sg(cmd); + if (!rbuf) + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + + if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { + /* + * CURRENT ERROR, UNIT ATTENTION + */ + buf[0] = 0x70; + buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; + + /* + * The Additional Sense Code (ASC) from the UNIT ATTENTION + */ + buf[SPC_ASC_KEY_OFFSET] = ua_asc; + buf[SPC_ASCQ_KEY_OFFSET] = ua_ascq; + buf[7] = 0x0A; + } else { + /* + * CURRENT ERROR, NO SENSE + */ + buf[0] = 0x70; + buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; + + /* + * NO ADDITIONAL SENSE INFORMATION + */ + buf[SPC_ASC_KEY_OFFSET] = 0x00; + buf[7] = 0x0A; + } + + memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); + transport_kunmap_data_sg(cmd); + + target_complete_cmd(cmd, GOOD); + return 0; +} + +sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd) +{ + struct se_dev_entry *deve; + struct se_session *sess = cmd->se_sess; + unsigned char *buf; + u32 lun_count = 0, offset = 8, i; + + if (cmd->data_length < 16) { + pr_warn("REPORT LUNS allocation length %u too small\n", + cmd->data_length); + return TCM_INVALID_CDB_FIELD; + } + + buf = transport_kmap_data_sg(cmd); + if (!buf) + return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + + /* + * If no struct se_session pointer is present, this struct se_cmd is + * coming via a target_core_mod PASSTHROUGH op, and not through + * a $FABRIC_MOD. In that case, report LUN=0 only. + */ + if (!sess) { + int_to_scsilun(0, (struct scsi_lun *)&buf[offset]); + lun_count = 1; + goto done; + } + + spin_lock_irq(&sess->se_node_acl->device_list_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = sess->se_node_acl->device_list[i]; + if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS)) + continue; + /* + * We determine the correct LUN LIST LENGTH even once we + * have reached the initial allocation length. + * See SPC2-R20 7.19. + */ + lun_count++; + if ((offset + 8) > cmd->data_length) + continue; + + int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]); + offset += 8; + } + spin_unlock_irq(&sess->se_node_acl->device_list_lock); + + /* + * See SPC3 r07, page 159. + */ +done: + lun_count *= 8; + buf[0] = ((lun_count >> 24) & 0xff); + buf[1] = ((lun_count >> 16) & 0xff); + buf[2] = ((lun_count >> 8) & 0xff); + buf[3] = (lun_count & 0xff); + transport_kunmap_data_sg(cmd); + + target_complete_cmd_with_length(cmd, GOOD, 8 + lun_count * 8); + return 0; +} +EXPORT_SYMBOL(spc_emulate_report_luns); + +static sense_reason_t +spc_emulate_testunitready(struct se_cmd *cmd) +{ + target_complete_cmd(cmd, GOOD); + return 0; +} + +sense_reason_t +spc_parse_cdb(struct se_cmd *cmd, unsigned int *size) +{ + struct se_device *dev = cmd->se_dev; + unsigned char *cdb = cmd->t_task_cdb; + + switch (cdb[0]) { + case MODE_SELECT: + *size = cdb[4]; + cmd->execute_cmd = spc_emulate_modeselect; + break; + case MODE_SELECT_10: + *size = (cdb[7] << 8) + cdb[8]; + cmd->execute_cmd = spc_emulate_modeselect; + break; + case MODE_SENSE: + *size = cdb[4]; + cmd->execute_cmd = spc_emulate_modesense; + break; + case MODE_SENSE_10: + *size = (cdb[7] << 8) + cdb[8]; + cmd->execute_cmd = spc_emulate_modesense; + break; + case LOG_SELECT: + case LOG_SENSE: + *size = (cdb[7] << 8) + cdb[8]; + break; + case PERSISTENT_RESERVE_IN: + *size = (cdb[7] << 8) + cdb[8]; + cmd->execute_cmd = target_scsi3_emulate_pr_in; + break; + case PERSISTENT_RESERVE_OUT: + *size = (cdb[7] << 8) + cdb[8]; + cmd->execute_cmd = target_scsi3_emulate_pr_out; + break; + case RELEASE: + case RELEASE_10: + if (cdb[0] == RELEASE_10) + *size = (cdb[7] << 8) | cdb[8]; + else + *size = cmd->data_length; + + cmd->execute_cmd = target_scsi2_reservation_release; + break; + case RESERVE: + case RESERVE_10: + /* + * The SPC-2 RESERVE does not contain a size in the SCSI CDB. + * Assume the passthrough or $FABRIC_MOD will tell us about it. + */ + if (cdb[0] == RESERVE_10) + *size = (cdb[7] << 8) | cdb[8]; + else + *size = cmd->data_length; + + cmd->execute_cmd = target_scsi2_reservation_reserve; + break; + case REQUEST_SENSE: + *size = cdb[4]; + cmd->execute_cmd = spc_emulate_request_sense; + break; + case INQUIRY: + *size = (cdb[3] << 8) + cdb[4]; + + /* + * Do implicit HEAD_OF_QUEUE processing for INQUIRY. + * See spc4r17 section 5.3 + */ + cmd->sam_task_attr = TCM_HEAD_TAG; + cmd->execute_cmd = spc_emulate_inquiry; + break; + case SECURITY_PROTOCOL_IN: + case SECURITY_PROTOCOL_OUT: + *size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9]; + break; + case EXTENDED_COPY: + *size = get_unaligned_be32(&cdb[10]); + cmd->execute_cmd = target_do_xcopy; + break; + case RECEIVE_COPY_RESULTS: + *size = get_unaligned_be32(&cdb[10]); + cmd->execute_cmd = target_do_receive_copy_results; + break; + case READ_ATTRIBUTE: + case WRITE_ATTRIBUTE: + *size = (cdb[10] << 24) | (cdb[11] << 16) | + (cdb[12] << 8) | cdb[13]; + break; + case RECEIVE_DIAGNOSTIC: + case SEND_DIAGNOSTIC: + *size = (cdb[3] << 8) | cdb[4]; + break; + case WRITE_BUFFER: + *size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8]; + break; + case REPORT_LUNS: + cmd->execute_cmd = spc_emulate_report_luns; + *size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9]; + /* + * Do implicit HEAD_OF_QUEUE processing for REPORT_LUNS + * See spc4r17 section 5.3 + */ + cmd->sam_task_attr = TCM_HEAD_TAG; + break; + case TEST_UNIT_READY: + cmd->execute_cmd = spc_emulate_testunitready; + *size = 0; + break; + case MAINTENANCE_IN: + if (dev->transport->get_device_type(dev) != TYPE_ROM) { + /* + * MAINTENANCE_IN from SCC-2 + * Check for emulated MI_REPORT_TARGET_PGS + */ + if ((cdb[1] & 0x1f) == MI_REPORT_TARGET_PGS) { + cmd->execute_cmd = + target_emulate_report_target_port_groups; + } + *size = get_unaligned_be32(&cdb[6]); + } else { + /* + * GPCMD_SEND_KEY from multi media commands + */ + *size = get_unaligned_be16(&cdb[8]); + } + break; + case MAINTENANCE_OUT: + if (dev->transport->get_device_type(dev) != TYPE_ROM) { + /* + * MAINTENANCE_OUT from SCC-2 + * Check for emulated MO_SET_TARGET_PGS. + */ + if (cdb[1] == MO_SET_TARGET_PGS) { + cmd->execute_cmd = + target_emulate_set_target_port_groups; + } + *size = get_unaligned_be32(&cdb[6]); + } else { + /* + * GPCMD_SEND_KEY from multi media commands + */ + *size = get_unaligned_be16(&cdb[8]); + } + break; + default: + pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode" + " 0x%02x, sending CHECK_CONDITION.\n", + cmd->se_tfo->get_fabric_name(), cdb[0]); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + + return 0; +} +EXPORT_SYMBOL(spc_parse_cdb); -- cgit v1.2.3-54-g00ecf