From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/tty/serial/m32r_sio.c | 1170 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1170 insertions(+) create mode 100644 drivers/tty/serial/m32r_sio.c (limited to 'drivers/tty/serial/m32r_sio.c') diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c new file mode 100644 index 000000000..8f7f83a14 --- /dev/null +++ b/drivers/tty/serial/m32r_sio.c @@ -0,0 +1,1170 @@ +/* + * m32r_sio.c + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.c. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ + +#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define BAUD_RATE 115200 + +#include +#include "m32r_sio.h" +#include "m32r_sio_reg.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +#define BASE_BAUD 115200 + +/* Standard COM flags */ +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#if defined(CONFIG_PLAT_USRV) + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ + +#else /* !CONFIG_PLAT_USRV */ + +#if defined(CONFIG_SERIAL_M32R_PLDSIO) +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ + STD_COM_FLAGS }, /* ttyS0 */ +#else +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ + STD_COM_FLAGS }, /* ttyS0 */ +#endif + +#endif /* !CONFIG_PLAT_USRV */ + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_sio_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define __sio_in(x) inw((unsigned long)(x)) +#define __sio_out(v,x) outw((v),(unsigned long)(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned short sbaud; + sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; + __sio_out(sbaud, PLD_ESIO0BAUR); +} + +static void sio_reset(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_init(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); +} + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define __sio_in(x) inl(x) +#define __sio_out(v,x) outl((v),(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned long i, j; + + i = boot_cpu_data.bus_clock / (baud * 16); + j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; + i -= 1; + j = (j + 1) >> 1; + + __sio_out(i, M32R_SIO0_BAUR_PORTL); + __sio_out(j, M32R_SIO0_RBAUR_PORTL); +} + +static void sio_reset(void) +{ + __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ + __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ + __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ +} + +static void sio_init(void) +{ + unsigned int tmp; + + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_STS_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); +} + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +static unsigned int sio_in(struct uart_sio_port *up, int offset) +{ + return __sio_in(up->port.iobase + offset); +} + +static void sio_out(struct uart_sio_port *up, int offset, int value) +{ + __sio_out(value, up->port.iobase + offset); +} + +static unsigned int serial_in(struct uart_sio_port *up, int offset) +{ + if (!offset) + return 0; + + return __sio_in(offset); +} + +static void serial_out(struct uart_sio_port *up, int offset, int value) +{ + if (!offset) + return; + + __sio_out(value, offset); +} + +static void m32r_sio_stop_tx(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void m32r_sio_start_tx(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + struct circ_buf *xmit = &up->port.state->xmit; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + if (!uart_circ_empty(xmit)) { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + } + while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); +#else + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +#endif +} + +static void m32r_sio_stop_rx(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void m32r_sio_enable_ms(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void receive_chars(struct uart_sio_port *up, int *status) +{ + struct tty_port *port = &up->port.state->port; + unsigned char ch; + unsigned char flag; + int max_count = 256; + + do { + ch = sio_in(up, SIORXB); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(port, ch, flag); + + if (*status & UART_LSR_OE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(port, 0, TTY_OVERRUN); + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + spin_unlock(&up->port.lock); + tty_flip_buffer_push(port); + spin_lock(&up->port.lock); +} + +static void transmit_chars(struct uart_sio_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { +#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ + serial_out(up, UART_TX, up->port.x_char); +#endif + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + m32r_sio_stop_tx(&up->port); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); + + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + m32r_sio_stop_tx(&up->port); +} + +/* + * This handles the interrupt from one port. + */ +static inline void m32r_sio_handle_port(struct uart_sio_port *up, + unsigned int status) +{ + DEBUG_INTR("status = %x...", status); + + if (status & 0x04) + receive_chars(up, &status); + if (status & 0x01) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO +// if (irq == PLD_IRQ_SIO0_SND) +// irq = PLD_IRQ_SIO0_RCV; +#else + if (irq == M32R_IRQ_SIO0_S) + irq = M32R_IRQ_SIO0_R; +#endif + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_sio_port *up; + unsigned int sts; + + up = list_entry(l, struct uart_sio_port, list); + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + if (sts & 0xe0) + sio_error(&sts); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, m32r_sio_interrupt, + irq_flags, "SIO0-RX", i); + ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, + irq_flags, "SIO0-TX", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) { + free_irq(up->port.irq, i); + free_irq(up->port.irq + 1, i); + } + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an interrupt. + */ +static void m32r_sio_timeout(unsigned long data) +{ + struct uart_sio_port *up = (struct uart_sio_port *)data; + unsigned int timeout; + unsigned int sts; + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int m32r_sio_tx_empty(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int m32r_sio_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void m32r_sio_break_ctl(struct uart_port *port, int break_state) +{ + +} + +static int m32r_sio_startup(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + int retval; + + sio_init(); + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!up->port.irq) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + * - M32R_SIO: 0x0c + * - M32R_PLDSIO: 0x04 + */ + up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + sio_out(up, SIOTRCR, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + sio_reset(); + + return 0; +} + +static void m32r_sio_shutdown(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + /* + * Disable interrupts from this port + */ + up->ier = 0; + sio_out(up, SIOTRCR, 0); + + /* + * Disable break condition and FIFOs + */ + + sio_init(); + + if (!up->port.irq) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int m32r_sio_get_divisor(struct uart_port *port, + unsigned int baud) +{ + return uart_get_divisor(port, baud); +} + +static void m32r_sio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + unsigned char cval = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); +#else + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +#endif + quot = m32r_sio_get_divisor(port, baud); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + sio_set_baud_rate(baud); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + up->lcr = cval; /* Save LCR */ + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void m32r_sio_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + if (up->pm) + up->pm(port, state, oldstate); +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; +#ifndef CONFIG_SERIAL_M32R_PLDSIO + unsigned long start; +#endif + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { +#ifdef CONFIG_SERIAL_M32R_PLDSIO + *res = request_mem_region(up->port.mapbase, size, "serial"); +#else + start = up->port.mapbase; + *res = request_mem_region(start, size, "serial"); +#endif + if (!*res) + ret = -EBUSY; + } + break; + + case UPIO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + +static void m32r_sio_release_port(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case UPIO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int m32r_sio_request_port(struct uart_port *port) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + struct resource *res = NULL; + int ret = 0; + + ret = m32r_sio_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = resource_size(res); + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res) + release_resource(res); + } + + return ret; +} + +static void m32r_sio_config_port(struct uart_port *port, int unused) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.fifosize = 1; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || ser->baud_base < 9600) + return -EINVAL; + return 0; +} + +static struct uart_ops m32r_sio_pops = { + .tx_empty = m32r_sio_tx_empty, + .set_mctrl = m32r_sio_set_mctrl, + .get_mctrl = m32r_sio_get_mctrl, + .stop_tx = m32r_sio_stop_tx, + .start_tx = m32r_sio_start_tx, + .stop_rx = m32r_sio_stop_rx, + .enable_ms = m32r_sio_enable_ms, + .break_ctl = m32r_sio_break_ctl, + .startup = m32r_sio_startup, + .shutdown = m32r_sio_shutdown, + .set_termios = m32r_sio_set_termios, + .pm = m32r_sio_pm, + .release_port = m32r_sio_release_port, + .request_port = m32r_sio_request_port, + .config_port = m32r_sio_config_port, + .verify_port = m32r_sio_verify_port, +}; + +static struct uart_sio_port m32r_sio_ports[UART_NR]; + +static void __init m32r_sio_init_ports(void) +{ + struct uart_sio_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &m32r_sio_pops; + } +} + +static void __init m32r_sio_register_ports(struct uart_driver *drv) +{ + int i; + + m32r_sio_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_sio_port *up = &m32r_sio_ports[i]; + + up->port.line = i; + up->port.ops = &m32r_sio_pops; + init_timer(&up->timer); + up->timer.function = m32r_sio_timeout; + + up->mcr_mask = ~0; + up->mcr_force = 0; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_sio_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = sio_in(up, SIOSTS); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & UART_EMPTY) != UART_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) + udelay(1); + } +} + +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = + container_of(port, struct uart_sio_port, port); + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void m32r_sio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sio_port *up = &m32r_sio_ports[co->index]; + unsigned int ier; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, SIOTRCR); + sio_out(up, SIOTRCR, 0); + + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, SIOTRCR, ier); +} + +static int __init m32r_sio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &m32r_sio_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver m32r_sio_reg; +static struct console m32r_sio_console = { + .name = "ttyS", + .write = m32r_sio_console_write, + .device = uart_console_device, + .setup = m32r_sio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &m32r_sio_reg, +}; + +static int __init m32r_sio_console_init(void) +{ + sio_reset(); + sio_init(); + m32r_sio_init_ports(); + register_console(&m32r_sio_console); + return 0; +} +console_initcall(m32r_sio_console_init); + +#define M32R_SIO_CONSOLE &m32r_sio_console +#else +#define M32R_SIO_CONSOLE NULL +#endif + +static struct uart_driver m32r_sio_reg = { + .owner = THIS_MODULE, + .driver_name = "sio", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = M32R_SIO_CONSOLE, +}; + +/** + * m32r_sio_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void m32r_sio_suspend_port(int line) +{ + uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +/** + * m32r_sio_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void m32r_sio_resume_port(int line) +{ + uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +static int __init m32r_sio_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: M32R SIO driver\n"); + + for (i = 0; i < nr_irqs; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&m32r_sio_reg); + if (ret >= 0) + m32r_sio_register_ports(&m32r_sio_reg); + + return ret; +} + +static void __exit m32r_sio_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); + + uart_unregister_driver(&m32r_sio_reg); +} + +module_init(m32r_sio_init); +module_exit(m32r_sio_exit); + +EXPORT_SYMBOL(m32r_sio_suspend_port); +EXPORT_SYMBOL(m32r_sio_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic M32R SIO serial driver"); -- cgit v1.2.3