From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 drivers/usb/dwc3/Kconfig | 107 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 drivers/usb/dwc3/Kconfig

(limited to 'drivers/usb/dwc3/Kconfig')

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
new file mode 100644
index 000000000..827c4f803
--- /dev/null
+++ b/drivers/usb/dwc3/Kconfig
@@ -0,0 +1,107 @@
+config USB_DWC3
+	tristate "DesignWare USB3 DRD Core Support"
+	depends on (USB || USB_GADGET) && HAS_DMA
+	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
+	help
+	  Say Y or M here if your system has a Dual Role SuperSpeed
+	  USB controller based on the DesignWare USB3 IP Core.
+
+	  If you choose to build this driver is a dynamically linked
+	  module, the module will be called dwc3.ko.
+
+if USB_DWC3
+
+choice
+	bool "DWC3 Mode Selection"
+	default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
+	default USB_DWC3_HOST if (USB && !USB_GADGET)
+	default USB_DWC3_GADGET if (!USB && USB_GADGET)
+
+config USB_DWC3_HOST
+	bool "Host only mode"
+	depends on USB=y || USB=USB_DWC3
+	help
+	  Select this when you want to use DWC3 in host mode only,
+	  thereby the gadget feature will be regressed.
+
+config USB_DWC3_GADGET
+	bool "Gadget only mode"
+	depends on USB_GADGET=y || USB_GADGET=USB_DWC3
+	help
+	  Select this when you want to use DWC3 in gadget mode only,
+	  thereby the host feature will be regressed.
+
+config USB_DWC3_DUAL_ROLE
+	bool "Dual Role mode"
+	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
+	help
+	  This is the default mode of working of DWC3 controller where
+	  both host and gadget features are enabled.
+
+endchoice
+
+comment "Platform Glue Driver Support"
+
+config USB_DWC3_OMAP
+	tristate "Texas Instruments OMAP5 and similar Platforms"
+	depends on EXTCON && (ARCH_OMAP2PLUS || COMPILE_TEST)
+	depends on OF
+	default USB_DWC3
+	help
+	  Some platforms from Texas Instruments like OMAP5, DRA7xxx and
+	  AM437x use this IP for USB2/3 functionality.
+
+	  Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_EXYNOS
+	tristate "Samsung Exynos Platform"
+	depends on ARCH_EXYNOS && OF || COMPILE_TEST
+	default USB_DWC3
+	help
+	  Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
+	  say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_PCI
+	tristate "PCIe-based Platforms"
+	depends on PCI
+	default USB_DWC3
+	help
+	  If you're using the DesignWare Core IP with a PCIe, please say
+	  'Y' or 'M' here.
+
+	  One such PCIe-based platform is Synopsys' PCIe HAPS model of
+	  this IP.
+
+config USB_DWC3_KEYSTONE
+	tristate "Texas Instruments Keystone2 Platforms"
+	depends on ARCH_KEYSTONE || COMPILE_TEST
+	default USB_DWC3
+	help
+	  Support of USB2/3 functionality in TI Keystone2 platforms.
+	  Say 'Y' or 'M' here if you have one such device
+
+config USB_DWC3_ST
+	tristate "STMicroelectronics Platforms"
+	depends on ARCH_STI && OF
+	default USB_DWC3
+	help
+	  STMicroelectronics SoCs with one DesignWare Core USB3 IP
+	  inside (i.e. STiH407).
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_QCOM
+	tristate "Qualcomm Platforms"
+	depends on ARCH_QCOM || COMPILE_TEST
+	default USB_DWC3
+	help
+	  Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
+	  say 'Y' or 'M' if you have one such device.
+
+comment "Debugging features"
+
+config USB_DWC3_DEBUG
+	bool "Enable Debugging Messages"
+	help
+	  Say Y here to enable debugging messages on DWC3 Driver.
+
+endif
-- 
cgit v1.2.3-54-g00ecf