From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: AndrĂ© Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/usb/gadget/udc/bdc/Kconfig | 21 + drivers/usb/gadget/udc/bdc/Makefile | 8 + drivers/usb/gadget/udc/bdc/bdc.h | 490 ++++++++ drivers/usb/gadget/udc/bdc/bdc_cmd.c | 376 ++++++ drivers/usb/gadget/udc/bdc/bdc_cmd.h | 29 + drivers/usb/gadget/udc/bdc/bdc_core.c | 532 +++++++++ drivers/usb/gadget/udc/bdc/bdc_dbg.c | 123 ++ drivers/usb/gadget/udc/bdc/bdc_dbg.h | 37 + drivers/usb/gadget/udc/bdc/bdc_ep.c | 2025 +++++++++++++++++++++++++++++++++ drivers/usb/gadget/udc/bdc/bdc_ep.h | 22 + drivers/usb/gadget/udc/bdc/bdc_pci.c | 132 +++ drivers/usb/gadget/udc/bdc/bdc_udc.c | 588 ++++++++++ 12 files changed, 4383 insertions(+) create mode 100644 drivers/usb/gadget/udc/bdc/Kconfig create mode 100644 drivers/usb/gadget/udc/bdc/Makefile create mode 100644 drivers/usb/gadget/udc/bdc/bdc.h create mode 100644 drivers/usb/gadget/udc/bdc/bdc_cmd.c create mode 100644 drivers/usb/gadget/udc/bdc/bdc_cmd.h create mode 100644 drivers/usb/gadget/udc/bdc/bdc_core.c create mode 100644 drivers/usb/gadget/udc/bdc/bdc_dbg.c create mode 100644 drivers/usb/gadget/udc/bdc/bdc_dbg.h create mode 100644 drivers/usb/gadget/udc/bdc/bdc_ep.c create mode 100644 drivers/usb/gadget/udc/bdc/bdc_ep.h create mode 100644 drivers/usb/gadget/udc/bdc/bdc_pci.c create mode 100644 drivers/usb/gadget/udc/bdc/bdc_udc.c (limited to 'drivers/usb/gadget/udc/bdc') diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig new file mode 100644 index 000000000..0d7b8c9f7 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/Kconfig @@ -0,0 +1,21 @@ +config USB_BDC_UDC + tristate "Broadcom USB3.0 device controller IP driver(BDC)" + depends on USB_GADGET && HAS_DMA + + help + BDC is Broadcom's USB3.0 device controller IP. If your SOC has a BDC IP + then select this driver. + + Say "y" here to link the driver statically, or "m" to build a dynamically + linked module called "bdc". + +if USB_BDC_UDC + +comment "Platform Support" +config USB_BDC_PCI + tristate "BDC support for PCIe based platforms" + depends on PCI + default USB_BDC_UDC + help + Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform. +endif diff --git a/drivers/usb/gadget/udc/bdc/Makefile b/drivers/usb/gadget/udc/bdc/Makefile new file mode 100644 index 000000000..5cf6a3bcd --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_USB_BDC_UDC) += bdc.o +bdc-y := bdc_core.o bdc_cmd.o bdc_ep.o bdc_udc.o + +ifneq ($(CONFIG_USB_GADGET_VERBOSE),) + bdc-y += bdc_dbg.o +endif + +obj-$(CONFIG_USB_BDC_PCI) += bdc_pci.o diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h new file mode 100644 index 000000000..dc18a20bf --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc.h @@ -0,0 +1,490 @@ +/* + * bdc.h - header for the BRCM BDC USB3.0 device controller + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_BDC_H__ +#define __LINUX_BDC_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BRCM_BDC_NAME "bdc_usb3" +#define BRCM_BDC_DESC "BDC device controller driver" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +/* BDC command operation timeout in usec*/ +#define BDC_CMD_TIMEOUT 1000 +/* BDC controller operation timeout in usec*/ +#define BDC_COP_TIMEOUT 500 + +/* + * Maximum size of ep0 response buffer for ch9 requests, + * the set_sel request uses 6 so far, the max. +*/ +#define EP0_RESPONSE_BUFF 6 +/* Start with SS as default */ +#define EP0_MAX_PKT_SIZE 512 + +/* 64 entries in a SRR */ +#define NUM_SR_ENTRIES 64 + +/* Num of bds per table */ +#define NUM_BDS_PER_TABLE 32 + +/* Num of tables in bd list for control,bulk and Int ep */ +#define NUM_TABLES 2 + +/* Num of tables in bd list for Isoch ep */ +#define NUM_TABLES_ISOCH 6 + +/* U1 Timeout default: 248usec */ +#define U1_TIMEOUT 0xf8 + +/* Interrupt coalescence in usec */ +#define INT_CLS 500 + +/* Register offsets */ +/* Configuration and Capability registers */ +#define BDC_BDCCFG0 0x00 +#define BDC_BDCCFG1 0x04 +#define BDC_BDCCAP0 0x08 +#define BDC_BDCCAP1 0x0c +#define BDC_CMDPAR0 0x10 +#define BDC_CMDPAR1 0x14 +#define BDC_CMDPAR2 0x18 +#define BDC_CMDSC 0x1c +#define BDC_USPC 0x20 +#define BDC_USPPMS 0x28 +#define BDC_USPPM2 0x2c +#define BDC_SPBBAL 0x38 +#define BDC_SPBBAH 0x3c +#define BDC_BDCSC 0x40 +#define BDC_XSFNTF 0x4c + +#define BDC_DVCSA 0x50 +#define BDC_DVCSB 0x54 +#define BDC_EPSTS0(n) (0x60 + (n * 0x10)) +#define BDC_EPSTS1(n) (0x64 + (n * 0x10)) +#define BDC_EPSTS2(n) (0x68 + (n * 0x10)) +#define BDC_EPSTS3(n) (0x6c + (n * 0x10)) +#define BDC_EPSTS4(n) (0x70 + (n * 0x10)) +#define BDC_EPSTS5(n) (0x74 + (n * 0x10)) +#define BDC_EPSTS6(n) (0x78 + (n * 0x10)) +#define BDC_EPSTS7(n) (0x7c + (n * 0x10)) +#define BDC_SRRBAL(n) (0x200 + (n * 0x10)) +#define BDC_SRRBAH(n) (0x204 + (n * 0x10)) +#define BDC_SRRINT(n) (0x208 + (n * 0x10)) +#define BDC_INTCTLS(n) (0x20c + (n * 0x10)) + +/* Extended capability regs */ +#define BDC_FSCNOC 0xcd4 +#define BDC_FSCNIC 0xce4 +#define NUM_NCS(p) (p >> 28) + +/* Register bit fields and Masks */ +/* BDC Configuration 0 */ +#define BDC_PGS(p) (((p) & (0x7 << 8)) >> 8) +#define BDC_SPB(p) (p & 0x7) + +/* BDC Capability1 */ +#define BDC_P64 (1 << 0) + +/* BDC Command register */ +#define BDC_CMD_FH 0xe +#define BDC_CMD_DNC 0x6 +#define BDC_CMD_EPO 0x4 +#define BDC_CMD_BLA 0x3 +#define BDC_CMD_EPC 0x2 +#define BDC_CMD_DVC 0x1 +#define BDC_CMD_CWS (0x1 << 5) +#define BDC_CMD_CST(p) (((p) & (0xf << 6))>>6) +#define BDC_CMD_EPN(p) ((p & 0x1f) << 10) +#define BDC_SUB_CMD_ADD (0x1 << 17) +#define BDC_SUB_CMD_FWK (0x4 << 17) +/* Reset sequence number */ +#define BDC_CMD_EPO_RST_SN (0x1 << 16) +#define BDC_CMD_EP0_XSD (0x1 << 16) +#define BDC_SUB_CMD_ADD_EP (0x1 << 17) +#define BDC_SUB_CMD_DRP_EP (0x2 << 17) +#define BDC_SUB_CMD_EP_STP (0x2 << 17) +#define BDC_SUB_CMD_EP_STL (0x4 << 17) +#define BDC_SUB_CMD_EP_RST (0x1 << 17) +#define BDC_CMD_SRD (1 << 27) + +/* CMD completion status */ +#define BDC_CMDS_SUCC 0x1 +#define BDC_CMDS_PARA 0x3 +#define BDC_CMDS_STAT 0x4 +#define BDC_CMDS_FAIL 0x5 +#define BDC_CMDS_INTL 0x6 +#define BDC_CMDS_BUSY 0xf + +/* CMDSC Param 2 shifts */ +#define EPT_SHIFT 22 +#define MP_SHIFT 10 +#define MB_SHIFT 6 +#define EPM_SHIFT 4 + +/* BDC USPSC */ +#define BDC_VBC (1 << 31) +#define BDC_PRC (1 << 30) +#define BDC_PCE (1 << 29) +#define BDC_CFC (1 << 28) +#define BDC_PCC (1 << 27) +#define BDC_PSC (1 << 26) +#define BDC_VBS (1 << 25) +#define BDC_PRS (1 << 24) +#define BDC_PCS (1 << 23) +#define BDC_PSP(p) (((p) & (0x7 << 20))>>20) +#define BDC_SCN (1 << 8) +#define BDC_SDC (1 << 7) +#define BDC_SWS (1 << 4) + +#define BDC_USPSC_RW (BDC_SCN|BDC_SDC|BDC_SWS|0xf) +#define BDC_PSP(p) (((p) & (0x7 << 20))>>20) + +#define BDC_SPEED_FS 0x1 +#define BDC_SPEED_LS 0x2 +#define BDC_SPEED_HS 0x3 +#define BDC_SPEED_SS 0x4 + +#define BDC_PST(p) (p & 0xf) +#define BDC_PST_MASK 0xf + +/* USPPMS */ +#define BDC_U2E (0x1 << 31) +#define BDC_U1E (0x1 << 30) +#define BDC_U2A (0x1 << 29) +#define BDC_PORT_W1S (0x1 << 17) +#define BDC_U1T(p) ((p) & 0xff) +#define BDC_U2T(p) (((p) & 0xff) << 8) +#define BDC_U1T_MASK 0xff + +/* USBPM2 */ +/* Hardware LPM Enable */ +#define BDC_HLE (1 << 16) + +/* BDC Status and Control */ +#define BDC_COP_RST (1 << 29) +#define BDC_COP_RUN (2 << 29) +#define BDC_COP_STP (4 << 29) + +#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP) + +#define BDC_COS (1 << 28) +#define BDC_CSTS(p) (((p) & (0x7 << 20)) >> 20) +#define BDC_MASK_MCW (1 << 7) +#define BDC_GIE (1 << 1) +#define BDC_GIP (1 << 0) + +#define BDC_HLT 1 +#define BDC_NOR 2 +#define BDC_OIP 7 + +/* Buffer descriptor and Status report bit fields and masks */ +#define BD_TYPE_BITMASK (0xf) +#define BD_CHAIN 0xf + +#define BD_TFS_SHIFT 4 +#define BD_SOT (1 << 26) +#define BD_EOT (1 << 27) +#define BD_ISP (1 << 29) +#define BD_IOC (1 << 30) +#define BD_SBF (1 << 31) + +#define BD_INTR_TARGET(p) (((p) & 0x1f) << 27) + +#define BDC_SRR_RWS (1 << 4) +#define BDC_SRR_RST (1 << 3) +#define BDC_SRR_ISR (1 << 2) +#define BDC_SRR_IE (1 << 1) +#define BDC_SRR_IP (1 << 0) +#define BDC_SRR_EPI(p) (((p) & (0xff << 24)) >> 24) +#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16) +#define BDC_SRR_DPI_MASK 0x00ff0000 + +#define MARK_CHAIN_BD (BD_CHAIN|BD_EOT|BD_SOT) + +/* Control transfer BD specific fields */ +#define BD_DIR_IN (1 << 25) + +#define BDC_PTC_MASK 0xf0000000 + +/* status report defines */ +#define SR_XSF 0 +#define SR_USPC 4 +#define SR_BD_LEN(p) (p & 0xffffff) + +#define XSF_SUCC 0x1 +#define XSF_SHORT 0x3 +#define XSF_BABB 0x4 +#define XSF_SETUP_RECV 0x6 +#define XSF_DATA_START 0x7 +#define XSF_STATUS_START 0x8 + +#define XSF_STS(p) (((p) >> 28) & 0xf) + +/* Transfer BD fields */ +#define BD_LEN(p) ((p) & 0x1ffff) +#define BD_LTF (1 << 25) +#define BD_TYPE_DS 0x1 +#define BD_TYPE_SS 0x2 + +#define BDC_EP_ENABLED (1 << 0) +#define BDC_EP_STALL (1 << 1) +#define BDC_EP_STOP (1 << 2) + +/* One BD can transfer max 65536 bytes */ +#define BD_MAX_BUFF_SIZE (1 << 16) +/* Maximum bytes in one XFR, Refer to BDC spec */ +#define MAX_XFR_LEN 16777215 + +/* defines for Force Header command */ +#define DEV_NOTF_TYPE 6 +#define FWK_SUBTYPE 1 +#define TRA_PACKET 4 + +#define to_bdc_ep(e) container_of(e, struct bdc_ep, usb_ep) +#define to_bdc_req(r) container_of(r, struct bdc_req, usb_req) +#define gadget_to_bdc(g) container_of(g, struct bdc, gadget) + +/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */ +#define BDC_TNOTIFY 2500 /*in ms*/ +/* Devstatus bitfields */ +#define REMOTE_WAKEUP_ISSUED (1 << 16) +#define DEVICE_SUSPENDED (1 << 17) +#define FUNC_WAKE_ISSUED (1 << 18) +#define REMOTE_WAKE_ENABLE (1 << USB_DEVICE_REMOTE_WAKEUP) + +/* On disconnect, preserve these bits and clear rest */ +#define DEVSTATUS_CLEAR (1 << USB_DEVICE_SELF_POWERED) +/* Hardware and software Data structures */ + +/* Endpoint bd: buffer descriptor */ +struct bdc_bd { + __le32 offset[4]; +}; + +/* Status report in Status report ring(srr) */ +struct bdc_sr { + __le32 offset[4]; +}; + +/* bd_table: contigous bd's in a table */ +struct bd_table { + struct bdc_bd *start_bd; + /* dma address of start bd of table*/ + dma_addr_t dma; +}; + +/* + * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd + * table's chained to each other through a chain bd, every table has equal + * number of bds. the software uses bdi(bd index) to refer to particular bd in + * the list. + */ +struct bd_list { + /* Array of bd table pointers*/ + struct bd_table **bd_table_array; + /* How many tables chained to each other */ + int num_tabs; + /* Max_bdi = num_tabs * num_bds_table - 1 */ + int max_bdi; + /* current enq bdi from sw point of view */ + int eqp_bdi; + /* current deq bdi from sw point of view */ + int hwd_bdi; + /* numbers of bds per table */ + int num_bds_table; +}; + +struct bdc_req; + +/* Representation of a transfer, one transfer can have multiple bd's */ +struct bd_transfer { + struct bdc_req *req; + /* start bd index */ + int start_bdi; + /* this will be the next hw dqp when this transfer completes */ + int next_hwd_bdi; + /* number of bds in this transfer */ + int num_bds; +}; + +/* + * Representation of a gadget request, every gadget request is contained + * by 1 bd_transfer. + */ +struct bdc_req { + struct usb_request usb_req; + struct list_head queue; + struct bdc_ep *ep; + /* only one Transfer per request */ + struct bd_transfer bd_xfr; + int epnum; +}; + +/* scratchpad buffer needed by bdc hardware */ +struct bdc_scratchpad { + dma_addr_t sp_dma; + void *buff; + u32 size; +}; + +/* endpoint representation */ +struct bdc_ep { + struct usb_ep usb_ep; + struct list_head queue; + struct bdc *bdc; + u8 ep_type; + u8 dir; + u8 ep_num; + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + unsigned int flags; + char name[20]; + /* endpoint bd list*/ + struct bd_list bd_list; + /* + * HW generates extra event for multi bd tranfers, this flag helps in + * ignoring the extra event + */ + bool ignore_next_sr; +}; + +/* bdc cmmand parameter structure */ +struct bdc_cmd_params { + u32 param2; + u32 param1; + u32 param0; +}; + +/* status report ring(srr), currently one srr is supported for entire system */ +struct srr { + struct bdc_sr *sr_bds; + u16 eqp_index; + u16 dqp_index; + dma_addr_t dma_addr; +}; + +/* EP0 states */ +enum bdc_ep0_state { + WAIT_FOR_SETUP = 0, + WAIT_FOR_DATA_START, + WAIT_FOR_DATA_XMIT, + WAIT_FOR_STATUS_START, + WAIT_FOR_STATUS_XMIT, + STATUS_PENDING +}; + +/* Link states */ +enum bdc_link_state { + BDC_LINK_STATE_U0 = 0x00, + BDC_LINK_STATE_U3 = 0x03, + BDC_LINK_STATE_RX_DET = 0x05, + BDC_LINK_STATE_RESUME = 0x0f +}; + +/* representation of bdc */ +struct bdc { + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + struct device *dev; + /* device lock */ + spinlock_t lock; + + /* num of endpoints for a particular instantiation of IP */ + unsigned int num_eps; + /* + * Array of ep's, it uses the same index covention as bdc hw i.e. + * 1 for ep0, 2 for 1out,3 for 1in .... + */ + struct bdc_ep **bdc_ep_array; + void __iomem *regs; + struct bdc_scratchpad scratchpad; + u32 sp_buff_size; + /* current driver supports 1 status ring */ + struct srr srr; + /* Last received setup packet */ + struct usb_ctrlrequest setup_pkt; + struct bdc_req ep0_req; + struct bdc_req status_req; + enum bdc_ep0_state ep0_state; + bool delayed_status; + bool zlp_needed; + bool reinit; + bool pullup; + /* Bits 0-15 are standard and 16-31 for proprietary information */ + u32 devstatus; + int irq; + void *mem; + u32 dev_addr; + /* DMA pools */ + struct dma_pool *bd_table_pool; + u8 test_mode; + /* array of callbacks for various status report handlers */ + void (*sr_handler[2])(struct bdc *, struct bdc_sr *); + /* ep0 callback handlers */ + void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *); + /* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */ + unsigned char ep0_response_buff[EP0_RESPONSE_BUFF]; + /* + * Timer to check if host resumed transfer after bdc sent Func wake + * notification packet after a remote wakeup. if not, then resend the + * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4 + */ + struct delayed_work func_wake_notify; +}; + +static inline u32 bdc_readl(void __iomem *base, u32 offset) +{ + return readl(base + offset); +} + +static inline void bdc_writel(void __iomem *base, u32 offset, u32 value) +{ + writel(value, base + offset); +} + +/* Buffer descriptor list operations */ +void bdc_notify_xfr(struct bdc *, u32); +void bdc_softconn(struct bdc *); +void bdc_softdisconn(struct bdc *); +int bdc_run(struct bdc *); +int bdc_stop(struct bdc *); +int bdc_reset(struct bdc *); +int bdc_udc_init(struct bdc *); +void bdc_udc_exit(struct bdc *); +int bdc_reinit(struct bdc *); + +/* Status report handlers */ +/* Upstream port status change sr */ +void bdc_sr_uspc(struct bdc *, struct bdc_sr *); +/* transfer sr */ +void bdc_sr_xsf(struct bdc *, struct bdc_sr *); +/* EP0 XSF handlers */ +void bdc_xsf_ep0_setup_recv(struct bdc *, struct bdc_sr *); +void bdc_xsf_ep0_data_start(struct bdc *, struct bdc_sr *); +void bdc_xsf_ep0_status_start(struct bdc *, struct bdc_sr *); + +#endif /* __LINUX_BDC_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c new file mode 100644 index 000000000..6a4155c4b --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c @@ -0,0 +1,376 @@ +/* + * bdc_cmd.c - BRCM BDC USB3.0 device controller + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include + +#include "bdc.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +/* Issues a cmd to cmd processor and waits for cmd completion */ +static int bdc_issue_cmd(struct bdc *bdc, u32 cmd_sc, u32 param0, + u32 param1, u32 param2) +{ + u32 timeout = BDC_CMD_TIMEOUT; + u32 cmd_status; + u32 temp; + + bdc_writel(bdc->regs, BDC_CMDPAR0, param0); + bdc_writel(bdc->regs, BDC_CMDPAR1, param1); + bdc_writel(bdc->regs, BDC_CMDPAR2, param2); + + /* Issue the cmd */ + /* Make sure the cmd params are written before asking HW to exec cmd */ + wmb(); + bdc_writel(bdc->regs, BDC_CMDSC, cmd_sc | BDC_CMD_CWS | BDC_CMD_SRD); + do { + temp = bdc_readl(bdc->regs, BDC_CMDSC); + dev_dbg_ratelimited(bdc->dev, "cmdsc=%x", temp); + cmd_status = BDC_CMD_CST(temp); + if (cmd_status != BDC_CMDS_BUSY) { + dev_dbg(bdc->dev, + "command completed cmd_sts:%x\n", cmd_status); + return cmd_status; + } + udelay(1); + } while (timeout--); + + dev_err(bdc->dev, + "command operation timedout cmd_status=%d\n", cmd_status); + + return cmd_status; +} + +/* Submits cmd and analyze the return value of bdc_issue_cmd */ +static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc, + u32 param0, u32 param1, u32 param2) +{ + u32 temp, cmd_status; + int reset_bdc = 0; + int ret; + + temp = bdc_readl(bdc->regs, BDC_CMDSC); + dev_dbg(bdc->dev, + "%s:CMDSC:%08x cmdsc:%08x param0=%08x param1=%08x param2=%08x\n", + __func__, temp, cmd_sc, param0, param1, param2); + + cmd_status = BDC_CMD_CST(temp); + if (cmd_status == BDC_CMDS_BUSY) { + dev_err(bdc->dev, "command processor busy: %x\n", cmd_status); + return -EBUSY; + } + ret = bdc_issue_cmd(bdc, cmd_sc, param0, param1, param2); + switch (ret) { + case BDC_CMDS_SUCC: + dev_dbg(bdc->dev, "command completed successfully\n"); + ret = 0; + break; + + case BDC_CMDS_PARA: + dev_err(bdc->dev, "command parameter error\n"); + ret = -EINVAL; + break; + + case BDC_CMDS_STAT: + dev_err(bdc->dev, "Invalid device/ep state\n"); + ret = -EINVAL; + break; + + case BDC_CMDS_FAIL: + dev_err(bdc->dev, "Command failed?\n"); + ret = -EAGAIN; + break; + + case BDC_CMDS_INTL: + dev_err(bdc->dev, "BDC Internal error\n"); + reset_bdc = 1; + ret = -ECONNRESET; + break; + + case BDC_CMDS_BUSY: + dev_err(bdc->dev, + "command timedout waited for %dusec\n", + BDC_CMD_TIMEOUT); + reset_bdc = 1; + ret = -ECONNRESET; + break; + default: + dev_dbg(bdc->dev, "Unknown command completion code:%x\n", ret); + } + + return ret; +} + +/* Deconfigure the endpoint from HW */ +int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep) +{ + u32 cmd_sc; + + cmd_sc = BDC_SUB_CMD_DRP_EP|BDC_CMD_EPN(ep->ep_num)|BDC_CMD_EPC; + dev_dbg(bdc->dev, "%s ep->ep_num =%d cmd_sc=%x\n", __func__, + ep->ep_num, cmd_sc); + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); +} + +/* Reinitalize the bdlist after config ep command */ +static void ep_bd_list_reinit(struct bdc_ep *ep) +{ + struct bdc *bdc = ep->bdc; + struct bdc_bd *bd; + + ep->bd_list.eqp_bdi = 0; + ep->bd_list.hwd_bdi = 0; + bd = ep->bd_list.bd_table_array[0]->start_bd; + dev_dbg(bdc->dev, "%s ep:%p bd:%p\n", __func__, ep, bd); + memset(bd, 0, sizeof(struct bdc_bd)); + bd->offset[3] |= cpu_to_le32(BD_SBF); +} + +/* Configure an endpoint */ +int bdc_config_ep(struct bdc *bdc, struct bdc_ep *ep) +{ + const struct usb_ss_ep_comp_descriptor *comp_desc; + const struct usb_endpoint_descriptor *desc; + u32 param0, param1, param2, cmd_sc; + u32 mps, mbs, mul, si; + int ret; + + desc = ep->desc; + comp_desc = ep->comp_desc; + cmd_sc = mul = mbs = param2 = 0; + param0 = lower_32_bits(ep->bd_list.bd_table_array[0]->dma); + param1 = upper_32_bits(ep->bd_list.bd_table_array[0]->dma); + cpu_to_le32s(¶m0); + cpu_to_le32s(¶m1); + + dev_dbg(bdc->dev, "%s: param0=%08x param1=%08x", + __func__, param0, param1); + si = desc->bInterval; + si = clamp_val(si, 1, 16) - 1; + + mps = usb_endpoint_maxp(desc); + mps &= 0x7ff; + param2 |= mps << MP_SHIFT; + param2 |= usb_endpoint_type(desc) << EPT_SHIFT; + + switch (bdc->gadget.speed) { + case USB_SPEED_SUPER: + if (usb_endpoint_xfer_int(desc) || + usb_endpoint_xfer_isoc(desc)) { + param2 |= si; + if (usb_endpoint_xfer_isoc(desc) && comp_desc) + mul = comp_desc->bmAttributes; + + } + param2 |= mul << EPM_SHIFT; + if (comp_desc) + mbs = comp_desc->bMaxBurst; + param2 |= mbs << MB_SHIFT; + break; + + case USB_SPEED_HIGH: + if (usb_endpoint_xfer_isoc(desc) || + usb_endpoint_xfer_int(desc)) { + param2 |= si; + + mbs = (usb_endpoint_maxp(desc) & 0x1800) >> 11; + param2 |= mbs << MB_SHIFT; + } + break; + + case USB_SPEED_FULL: + case USB_SPEED_LOW: + /* the hardware accepts SI in 125usec range */ + if (usb_endpoint_xfer_isoc(desc)) + si += 3; + + /* + * FS Int endpoints can have si of 1-255ms but the controller + * accepts 2^bInterval*125usec, so convert ms to nearest power + * of 2 + */ + if (usb_endpoint_xfer_int(desc)) + si = fls(desc->bInterval * 8) - 1; + + param2 |= si; + break; + default: + dev_err(bdc->dev, "UNKNOWN speed ERR\n"); + return -EINVAL; + } + + cmd_sc |= BDC_CMD_EPC|BDC_CMD_EPN(ep->ep_num)|BDC_SUB_CMD_ADD_EP; + + dev_dbg(bdc->dev, "cmd_sc=%x param2=%08x\n", cmd_sc, param2); + ret = bdc_submit_cmd(bdc, cmd_sc, param0, param1, param2); + if (ret) { + dev_err(bdc->dev, "command failed :%x\n", ret); + return ret; + } + ep_bd_list_reinit(ep); + + return ret; +} + +/* + * Change the HW deq pointer, if this command is successful, HW will start + * fetching the next bd from address dma_addr. + */ +int bdc_ep_bla(struct bdc *bdc, struct bdc_ep *ep, dma_addr_t dma_addr) +{ + u32 param0, param1; + u32 cmd_sc = 0; + + dev_dbg(bdc->dev, "%s: add=%08llx\n", __func__, + (unsigned long long)(dma_addr)); + param0 = lower_32_bits(dma_addr); + param1 = upper_32_bits(dma_addr); + cpu_to_le32s(¶m0); + cpu_to_le32s(¶m1); + + cmd_sc |= BDC_CMD_EPN(ep->ep_num)|BDC_CMD_BLA; + dev_dbg(bdc->dev, "cmd_sc=%x\n", cmd_sc); + + return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0); +} + +/* Set the address sent bu Host in SET_ADD request */ +int bdc_address_device(struct bdc *bdc, u32 add) +{ + u32 cmd_sc = 0; + u32 param2; + + dev_dbg(bdc->dev, "%s: add=%d\n", __func__, add); + cmd_sc |= BDC_SUB_CMD_ADD|BDC_CMD_DVC; + param2 = add & 0x7f; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2); +} + +/* Send a Function Wake notification packet using FH command */ +int bdc_function_wake_fh(struct bdc *bdc, u8 intf) +{ + u32 param0, param1; + u32 cmd_sc = 0; + + param0 = param1 = 0; + dev_dbg(bdc->dev, "%s intf=%d\n", __func__, intf); + cmd_sc |= BDC_CMD_FH; + param0 |= TRA_PACKET; + param0 |= (bdc->dev_addr << 25); + param1 |= DEV_NOTF_TYPE; + param1 |= (FWK_SUBTYPE<<4); + dev_dbg(bdc->dev, "param0=%08x param1=%08x\n", param0, param1); + + return bdc_submit_cmd(bdc, cmd_sc, param0, param1, 0); +} + +/* Send a Function Wake notification packet using DNC command */ +int bdc_function_wake(struct bdc *bdc, u8 intf) +{ + u32 cmd_sc = 0; + u32 param2 = 0; + + dev_dbg(bdc->dev, "%s intf=%d", __func__, intf); + param2 |= intf; + cmd_sc |= BDC_SUB_CMD_FWK|BDC_CMD_DNC; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, param2); +} + +/* Stall the endpoint */ +int bdc_ep_set_stall(struct bdc *bdc, int epnum) +{ + u32 cmd_sc = 0; + + dev_dbg(bdc->dev, "%s epnum=%d\n", __func__, epnum); + /* issue a stall endpoint command */ + cmd_sc |= BDC_SUB_CMD_EP_STL | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); +} + +/* resets the endpoint, called when host sends CLEAR_FEATURE(HALT) */ +int bdc_ep_clear_stall(struct bdc *bdc, int epnum) +{ + struct bdc_ep *ep; + u32 cmd_sc = 0; + int ret; + + dev_dbg(bdc->dev, "%s: epnum=%d\n", __func__, epnum); + ep = bdc->bdc_ep_array[epnum]; + /* + * If we are not in stalled then stall Endpoint and issue clear stall, + * his will reset the seq number for non EP0. + */ + if (epnum != 1) { + /* if the endpoint it not stallled */ + if (!(ep->flags & BDC_EP_STALL)) { + ret = bdc_ep_set_stall(bdc, epnum); + if (ret) + return ret; + } + } + /* Preserve the seq number for ep0 only */ + if (epnum != 1) + cmd_sc |= BDC_CMD_EPO_RST_SN; + + /* issue a reset endpoint command */ + cmd_sc |= BDC_SUB_CMD_EP_RST | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); + if (ret) { + dev_err(bdc->dev, "command failed:%x\n", ret); + return ret; + } + bdc_notify_xfr(bdc, epnum); + + return ret; +} + +/* Stop the endpoint, called when software wants to dequeue some request */ +int bdc_stop_ep(struct bdc *bdc, int epnum) +{ + struct bdc_ep *ep; + u32 cmd_sc = 0; + int ret; + + ep = bdc->bdc_ep_array[epnum]; + dev_dbg(bdc->dev, "%s: ep:%s ep->flags:%08x\n", __func__, + ep->name, ep->flags); + /* Endpoint has to be in running state to execute stop ep command */ + if (!(ep->flags & BDC_EP_ENABLED)) { + dev_err(bdc->dev, "stop endpoint called for disabled ep\n"); + return -EINVAL; + } + if ((ep->flags & BDC_EP_STALL) || (ep->flags & BDC_EP_STOP)) + return 0; + + /* issue a stop endpoint command */ + cmd_sc |= BDC_CMD_EP0_XSD | BDC_SUB_CMD_EP_STP + | BDC_CMD_EPN(epnum) | BDC_CMD_EPO; + + ret = bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0); + if (ret) { + dev_err(bdc->dev, + "stop endpoint command didn't complete:%d ep:%s\n", + ret, ep->name); + return ret; + } + ep->flags |= BDC_EP_STOP; + bdc_dump_epsts(bdc); + + return ret; +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.h b/drivers/usb/gadget/udc/bdc/bdc_cmd.h new file mode 100644 index 000000000..61d0e3bf9 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.h @@ -0,0 +1,29 @@ +/* + * bdc_cmd.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __LINUX_BDC_CMD_H__ +#define __LINUX_BDC_CMD_H__ + +/* Command operations */ +int bdc_address_device(struct bdc *, u32); +int bdc_config_ep(struct bdc *, struct bdc_ep *); +int bdc_dconfig_ep(struct bdc *, struct bdc_ep *); +int bdc_stop_ep(struct bdc *, int); +int bdc_ep_set_stall(struct bdc *, int); +int bdc_ep_clear_stall(struct bdc *, int); +int bdc_ep_set_halt(struct bdc_ep *, u32 , int); +int bdc_ep_bla(struct bdc *, struct bdc_ep *, dma_addr_t); +int bdc_function_wake(struct bdc*, u8); +int bdc_function_wake_fh(struct bdc*, u8); + +#endif /* __LINUX_BDC_CMD_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c new file mode 100644 index 000000000..5c8f4effb --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -0,0 +1,532 @@ +/* + * bdc_core.c - BRCM BDC USB3.0 device controller core operations + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bdc.h" +#include "bdc_dbg.h" + +/* Poll till controller status is not OIP */ +static int poll_oip(struct bdc *bdc, int usec) +{ + u32 status; + /* Poll till STS!= OIP */ + while (usec) { + status = bdc_readl(bdc->regs, BDC_BDCSC); + if (BDC_CSTS(status) != BDC_OIP) { + dev_dbg(bdc->dev, + "poll_oip complete status=%d", + BDC_CSTS(status)); + return 0; + } + udelay(10); + usec -= 10; + } + dev_err(bdc->dev, "Err: operation timedout BDCSC: 0x%08x\n", status); + + return -ETIMEDOUT; +} + +/* Stop the BDC controller */ +int bdc_stop(struct bdc *bdc) +{ + int ret; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* Check if BDC is already halted */ + if (BDC_CSTS(temp) == BDC_HLT) { + dev_vdbg(bdc->dev, "BDC already halted\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_STP; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc stop operation failed"); + + return ret; +} + +/* Issue a reset to BDC controller */ +int bdc_reset(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + /* First halt the controller */ + ret = bdc_stop(bdc); + if (ret) + return ret; + + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_RST; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc reset operation failed"); + + return ret; +} + +/* Run the BDC controller */ +int bdc_run(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* if BDC is already in running state then do not do anything */ + if (BDC_CSTS(temp) == BDC_NOR) { + dev_warn(bdc->dev, "bdc is already in running state\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COP_RUN; + temp |= BDC_COS; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) { + dev_err(bdc->dev, "bdc run operation failed:%d", ret); + return ret; + } + temp = bdc_readl(bdc->regs, BDC_BDCSC); + if (BDC_CSTS(temp) != BDC_NOR) { + dev_err(bdc->dev, "bdc not in normal mode after RUN op :%d\n", + BDC_CSTS(temp)); + return -ESHUTDOWN; + } + + return 0; +} + +/* + * Present the termination to the host, typically called from upstream port + * event with Vbus present =1 + */ +void bdc_softconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= ~BDC_PST_MASK; + uspc |= BDC_LINK_STATE_RX_DET; + uspc |= BDC_SWS; + dev_dbg(bdc->dev, "%s () uspc=%08x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Remove the termination */ +void bdc_softdisconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc |= BDC_SDC; + uspc &= ~BDC_SCN; + dev_dbg(bdc->dev, "%s () uspc=%x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ +static int scratchpad_setup(struct bdc *bdc) +{ + int sp_buff_size; + u32 low32; + u32 upp32; + + sp_buff_size = BDC_SPB(bdc_readl(bdc->regs, BDC_BDCCFG0)); + dev_dbg(bdc->dev, "%s() sp_buff_size=%d\n", __func__, sp_buff_size); + if (!sp_buff_size) { + dev_dbg(bdc->dev, "Scratchpad buffer not needed\n"); + return 0; + } + /* Refer to BDC spec, Table 4 for description of SPB */ + sp_buff_size = 1 << (sp_buff_size + 5); + dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size); + bdc->scratchpad.buff = dma_zalloc_coherent(bdc->dev, sp_buff_size, + &bdc->scratchpad.sp_dma, GFP_KERNEL); + + if (!bdc->scratchpad.buff) + goto fail; + + bdc->sp_buff_size = sp_buff_size; + bdc->scratchpad.size = sp_buff_size; + low32 = lower_32_bits(bdc->scratchpad.sp_dma); + upp32 = upper_32_bits(bdc->scratchpad.sp_dma); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + bdc_writel(bdc->regs, BDC_SPBBAL, low32); + bdc_writel(bdc->regs, BDC_SPBBAH, upp32); + return 0; + +fail: + bdc->scratchpad.buff = NULL; + + return -ENOMEM; +} + +/* Allocate the status report ring */ +static int setup_srr(struct bdc *bdc, int interrupter) +{ + dev_dbg(bdc->dev, "%s() NUM_SR_ENTRIES:%d\n", __func__, NUM_SR_ENTRIES); + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST); + bdc->srr.dqp_index = 0; + /* allocate the status report descriptors */ + bdc->srr.sr_bds = dma_zalloc_coherent( + bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + &bdc->srr.dma_addr, + GFP_KERNEL); + if (!bdc->srr.sr_bds) + return -ENOMEM; + + return 0; +} + +/* Initialize the HW regs and internal data structures */ +static void bdc_mem_init(struct bdc *bdc, bool reinit) +{ + u8 size = 0; + u32 usb2_pm; + u32 low32; + u32 upp32; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc->ep0_state = WAIT_FOR_SETUP; + bdc->dev_addr = 0; + bdc->srr.eqp_index = 0; + bdc->srr.dqp_index = 0; + bdc->zlp_needed = false; + bdc->delayed_status = false; + + bdc_writel(bdc->regs, BDC_SPBBAL, bdc->scratchpad.sp_dma); + /* Init the SRR */ + temp = BDC_SRR_RWS | BDC_SRR_RST; + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + dev_dbg(bdc->dev, "bdc->srr.sr_bds =%p\n", bdc->srr.sr_bds); + temp = lower_32_bits(bdc->srr.dma_addr); + size = fls(NUM_SR_ENTRIES) - 2; + temp |= size; + dev_dbg(bdc->dev, "SRRBAL[0]=%08x NUM_SR_ENTRIES:%d size:%d\n", + temp, NUM_SR_ENTRIES, size); + + low32 = lower_32_bits(temp); + upp32 = upper_32_bits(bdc->srr.dma_addr); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + + /* Write the dma addresses into regs*/ + bdc_writel(bdc->regs, BDC_SRRBAL(0), low32); + bdc_writel(bdc->regs, BDC_SRRBAH(0), upp32); + + temp = bdc_readl(bdc->regs, BDC_SRRINT(0)); + temp |= BDC_SRR_IE; + temp &= ~(BDC_SRR_RST | BDC_SRR_RWS); + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + + /* Set the Interrupt Coalescence ~500 usec */ + temp = bdc_readl(bdc->regs, BDC_INTCTLS(0)); + temp &= ~0xffff; + temp |= INT_CLS; + bdc_writel(bdc->regs, BDC_INTCTLS(0), temp); + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + /* Enable hardware LPM Enable */ + usb2_pm |= BDC_HLE; + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + /* readback for debug */ + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x\n", usb2_pm); + + /* Disable any unwanted SR's on SRR */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* We don't want Microframe counter wrap SR */ + temp |= BDC_MASK_MCW; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + /* + * In some error cases, driver has to reset the entire BDC controller + * in that case reinit is passed as 1 + */ + if (reinit) { + /* Enable interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + /* Init scratchpad to 0 */ + memset(bdc->scratchpad.buff, 0, bdc->sp_buff_size); + /* Initialize SRR to 0 */ + memset(bdc->srr.sr_bds, 0, + NUM_SR_ENTRIES * sizeof(struct bdc_bd)); + } else { + /* One time initiaization only */ + /* Enable status report function pointers */ + bdc->sr_handler[0] = bdc_sr_xsf; + bdc->sr_handler[1] = bdc_sr_uspc; + + /* EP0 status report function pointers */ + bdc->sr_xsf_ep0[0] = bdc_xsf_ep0_setup_recv; + bdc->sr_xsf_ep0[1] = bdc_xsf_ep0_data_start; + bdc->sr_xsf_ep0[2] = bdc_xsf_ep0_status_start; + } +} + +/* Free the dynamic memory */ +static void bdc_mem_free(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + /* Free SRR */ + if (bdc->srr.sr_bds) + dma_free_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + bdc->srr.sr_bds, bdc->srr.dma_addr); + + /* Free scratchpad */ + if (bdc->scratchpad.buff) + dma_free_coherent(bdc->dev, bdc->sp_buff_size, + bdc->scratchpad.buff, bdc->scratchpad.sp_dma); + + /* Destroy the dma pools */ + if (bdc->bd_table_pool) + dma_pool_destroy(bdc->bd_table_pool); + + /* Free the bdc_ep array */ + kfree(bdc->bdc_ep_array); + + bdc->srr.sr_bds = NULL; + bdc->scratchpad.buff = NULL; + bdc->bd_table_pool = NULL; + bdc->bdc_ep_array = NULL; +} + +/* + * bdc reinit gives a controller reset and reinitialize the registers, + * called from disconnect/bus reset scenario's, to ensure proper HW cleanup + */ +int bdc_reinit(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + ret = bdc_stop(bdc); + if (ret) + goto out; + + ret = bdc_reset(bdc); + if (ret) + goto out; + + /* the reinit flag is 1 */ + bdc_mem_init(bdc, true); + ret = bdc_run(bdc); +out: + bdc->reinit = false; + + return ret; +} + +/* Allocate all the dyanmic memory */ +static int bdc_mem_alloc(struct bdc *bdc) +{ + u32 page_size; + unsigned int num_ieps, num_oeps; + + dev_dbg(bdc->dev, + "%s() NUM_BDS_PER_TABLE:%d\n", __func__, + NUM_BDS_PER_TABLE); + page_size = BDC_PGS(bdc_readl(bdc->regs, BDC_BDCCFG0)); + /* page size is 2^pgs KB */ + page_size = 1 << page_size; + /* KB */ + page_size <<= 10; + dev_dbg(bdc->dev, "page_size=%d\n", page_size); + + /* Create a pool of bd tables */ + bdc->bd_table_pool = + dma_pool_create("BDC BD tables", bdc->dev, NUM_BDS_PER_TABLE * 16, + 16, page_size); + + if (!bdc->bd_table_pool) + goto fail; + + if (scratchpad_setup(bdc)) + goto fail; + + /* read from regs */ + num_ieps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNIC)); + num_oeps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNOC)); + /* +2: 1 for ep0 and the other is rsvd i.e. bdc_ep[0] is rsvd */ + bdc->num_eps = num_ieps + num_oeps + 2; + dev_dbg(bdc->dev, + "ieps:%d eops:%d num_eps:%d\n", + num_ieps, num_oeps, bdc->num_eps); + /* allocate array of ep pointers */ + bdc->bdc_ep_array = kcalloc(bdc->num_eps, sizeof(struct bdc_ep *), + GFP_KERNEL); + if (!bdc->bdc_ep_array) + goto fail; + + dev_dbg(bdc->dev, "Allocating sr report0\n"); + if (setup_srr(bdc, 0)) + goto fail; + + return 0; +fail: + dev_warn(bdc->dev, "Couldn't initialize memory\n"); + bdc_mem_free(bdc); + + return -ENOMEM; +} + +/* opposite to bdc_hw_init */ +static void bdc_hw_exit(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_mem_free(bdc); +} + +/* Initialize the bdc HW and memory */ +static int bdc_hw_init(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + ret = bdc_reset(bdc); + if (ret) { + dev_err(bdc->dev, "err resetting bdc abort bdc init%d\n", ret); + return ret; + } + ret = bdc_mem_alloc(bdc); + if (ret) { + dev_err(bdc->dev, "Mem alloc failed, aborting\n"); + return -ENOMEM; + } + bdc_mem_init(bdc, 0); + bdc_dbg_regs(bdc); + dev_dbg(bdc->dev, "HW Init done\n"); + + return 0; +} + +static int bdc_probe(struct platform_device *pdev) +{ + struct bdc *bdc; + struct resource *res; + int ret = -ENOMEM; + int irq; + u32 temp; + struct device *dev = &pdev->dev; + + dev_dbg(dev, "%s()\n", __func__); + bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL); + if (!bdc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bdc->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(bdc->regs)) { + dev_err(dev, "ioremap error\n"); + return -ENOMEM; + } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "platform_get_irq failed:%d\n", irq); + return irq; + } + spin_lock_init(&bdc->lock); + platform_set_drvdata(pdev, bdc); + bdc->irq = irq; + bdc->dev = dev; + dev_dbg(bdc->dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq); + + temp = bdc_readl(bdc->regs, BDC_BDCSC); + if ((temp & BDC_P64) && + !dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { + dev_dbg(bdc->dev, "Using 64-bit address\n"); + } else { + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(bdc->dev, "No suitable DMA config available, abort\n"); + return -ENOTSUPP; + } + dev_dbg(bdc->dev, "Using 32-bit address\n"); + } + ret = bdc_hw_init(bdc); + if (ret) { + dev_err(bdc->dev, "BDC init failure:%d\n", ret); + return ret; + } + ret = bdc_udc_init(bdc); + if (ret) { + dev_err(bdc->dev, "BDC Gadget init failure:%d\n", ret); + goto cleanup; + } + return 0; + +cleanup: + bdc_hw_exit(bdc); + + return ret; +} + +static int bdc_remove(struct platform_device *pdev) +{ + struct bdc *bdc; + + bdc = platform_get_drvdata(pdev); + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_udc_exit(bdc); + bdc_hw_exit(bdc); + + return 0; +} + +static struct platform_driver bdc_driver = { + .driver = { + .name = BRCM_BDC_NAME, + }, + .probe = bdc_probe, + .remove = bdc_remove, +}; + +module_platform_driver(bdc_driver); +MODULE_AUTHOR("Ashwini Pahuja "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(BRCM_BDC_DESC); diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.c b/drivers/usb/gadget/udc/bdc/bdc_dbg.c new file mode 100644 index 000000000..5945dbc47 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.c @@ -0,0 +1,123 @@ +/* + * bdc_dbg.c - BRCM BDC USB3.0 device controller debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include "bdc.h" +#include "bdc_dbg.h" + +void bdc_dbg_regs(struct bdc *bdc) +{ + u32 temp; + + dev_vdbg(bdc->dev, "bdc->regs:%p\n", bdc->regs); + temp = bdc_readl(bdc->regs, BDC_BDCCFG0); + dev_vdbg(bdc->dev, "bdccfg0:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCFG1); + dev_vdbg(bdc->dev, "bdccfg1:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCAP0); + dev_vdbg(bdc->dev, "bdccap0:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); + dev_vdbg(bdc->dev, "bdccap1:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_USPC); + dev_vdbg(bdc->dev, "uspc:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_DVCSA); + dev_vdbg(bdc->dev, "dvcsa:0x%08x\n", temp); + temp = bdc_readl(bdc->regs, BDC_DVCSB); + dev_vdbg(bdc->dev, "dvcsb:0x%x08\n", temp); +} + +void bdc_dump_epsts(struct bdc *bdc) +{ + u32 temp; + + temp = bdc_readl(bdc->regs, BDC_EPSTS0(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS0:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS1(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS1:0x%x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS2(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS2:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS3(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS3:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS4(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS4:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS5(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS5:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS6(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS6:0x%08x\n", temp); + + temp = bdc_readl(bdc->regs, BDC_EPSTS7(0)); + dev_vdbg(bdc->dev, "BDC_EPSTS7:0x%08x\n", temp); +} + +void bdc_dbg_srr(struct bdc *bdc, u32 srr_num) +{ + struct bdc_sr *sr; + dma_addr_t addr; + int i; + + sr = bdc->srr.sr_bds; + addr = bdc->srr.dma_addr; + dev_vdbg(bdc->dev, "bdc_dbg_srr sr:%p dqp_index:%d\n", + sr, bdc->srr.dqp_index); + for (i = 0; i < NUM_SR_ENTRIES; i++) { + sr = &bdc->srr.sr_bds[i]; + dev_vdbg(bdc->dev, "%llx %08x %08x %08x %08x\n", + (unsigned long long)addr, + le32_to_cpu(sr->offset[0]), + le32_to_cpu(sr->offset[1]), + le32_to_cpu(sr->offset[2]), + le32_to_cpu(sr->offset[3])); + addr += sizeof(*sr); + } +} + +void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep) +{ + struct bd_list *bd_list = &ep->bd_list; + struct bd_table *bd_table; + struct bdc_bd *bd; + int tbi, bdi, gbdi; + dma_addr_t dma; + + gbdi = 0; + dev_vdbg(bdc->dev, + "Dump bd list for %s epnum:%d\n", + ep->name, ep->ep_num); + + dev_vdbg(bdc->dev, + "tabs:%d max_bdi:%d eqp_bdi:%d hwd_bdi:%d num_bds_table:%d\n", + bd_list->num_tabs, bd_list->max_bdi, bd_list->eqp_bdi, + bd_list->hwd_bdi, bd_list->num_bds_table); + + for (tbi = 0; tbi < bd_list->num_tabs; tbi++) { + bd_table = bd_list->bd_table_array[tbi]; + for (bdi = 0; bdi < bd_list->num_bds_table; bdi++) { + bd = bd_table->start_bd + bdi; + dma = bd_table->dma + (sizeof(struct bdc_bd) * bdi); + dev_vdbg(bdc->dev, + "tbi:%2d bdi:%2d gbdi:%2d virt:%p phys:%llx %08x %08x %08x %08x\n", + tbi, bdi, gbdi++, bd, (unsigned long long)dma, + le32_to_cpu(bd->offset[0]), + le32_to_cpu(bd->offset[1]), + le32_to_cpu(bd->offset[2]), + le32_to_cpu(bd->offset[3])); + } + dev_vdbg(bdc->dev, "\n\n"); + } +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_dbg.h b/drivers/usb/gadget/udc/bdc/bdc_dbg.h new file mode 100644 index 000000000..338a6c701 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_dbg.h @@ -0,0 +1,37 @@ +/* + * bdc_dbg.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __LINUX_BDC_DBG_H__ +#define __LINUX_BDC_DBG_H__ + +#include "bdc.h" + +#ifdef CONFIG_USB_GADGET_VERBOSE +void bdc_dbg_bd_list(struct bdc *, struct bdc_ep*); +void bdc_dbg_srr(struct bdc *, u32); +void bdc_dbg_regs(struct bdc *); +void bdc_dump_epsts(struct bdc *); +#else +static inline void bdc_dbg_regs(struct bdc *bdc) +{ } + +static inline void bdc_dbg_srr(struct bdc *bdc, u32 srr_num) +{ } + +static inline void bdc_dbg_bd_list(struct bdc *bdc, struct bdc_ep *ep) +{ } + +static inline void bdc_dump_epsts(struct bdc *bdc) +{ } +#endif /* CONFIG_USB_GADGET_VERBOSE */ +#endif /* __LINUX_BDC_DBG_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c new file mode 100644 index 000000000..b04980cf6 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c @@ -0,0 +1,2025 @@ +/* + * bdc_ep.c - BRCM BDC USB3.0 device controller endpoint related functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bdc.h" +#include "bdc_ep.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +static const char * const ep0_state_string[] = { + "WAIT_FOR_SETUP", + "WAIT_FOR_DATA_START", + "WAIT_FOR_DATA_XMIT", + "WAIT_FOR_STATUS_START", + "WAIT_FOR_STATUS_XMIT", + "STATUS_PENDING" +}; + +/* Free the bdl during ep disable */ +static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs) +{ + struct bd_list *bd_list = &ep->bd_list; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + int index; + + dev_dbg(bdc->dev, "%s ep:%s num_tabs:%d\n", + __func__, ep->name, num_tabs); + + if (!bd_list->bd_table_array) { + dev_dbg(bdc->dev, "%s already freed\n", ep->name); + return; + } + for (index = 0; index < num_tabs; index++) { + /* + * check if the bd_table struct is allocated ? + * if yes, then check if bd memory has been allocated, then + * free the dma_pool and also the bd_table struct memory + */ + bd_table = bd_list->bd_table_array[index]; + dev_dbg(bdc->dev, "bd_table:%p index:%d\n", bd_table, index); + if (!bd_table) { + dev_dbg(bdc->dev, "bd_table not allocated\n"); + continue; + } + if (!bd_table->start_bd) { + dev_dbg(bdc->dev, "bd dma pool not allocted\n"); + continue; + } + + dev_dbg(bdc->dev, + "Free dma pool start_bd:%p dma:%llx\n", + bd_table->start_bd, + (unsigned long long)bd_table->dma); + + dma_pool_free(bdc->bd_table_pool, + bd_table->start_bd, + bd_table->dma); + /* Free the bd_table structure */ + kfree(bd_table); + } + /* Free the bd table array */ + kfree(ep->bd_list.bd_table_array); +} + +/* + * chain the tables, by insteting a chain bd at the end of prev_table, pointing + * to next_table + */ +static inline void chain_table(struct bd_table *prev_table, + struct bd_table *next_table, + u32 bd_p_tab) +{ + /* Chain the prev table to next table */ + prev_table->start_bd[bd_p_tab-1].offset[0] = + cpu_to_le32(lower_32_bits(next_table->dma)); + + prev_table->start_bd[bd_p_tab-1].offset[1] = + cpu_to_le32(upper_32_bits(next_table->dma)); + + prev_table->start_bd[bd_p_tab-1].offset[2] = + 0x0; + + prev_table->start_bd[bd_p_tab-1].offset[3] = + cpu_to_le32(MARK_CHAIN_BD); +} + +/* Allocate the bdl for ep, during config ep */ +static int ep_bd_list_alloc(struct bdc_ep *ep) +{ + struct bd_table *prev_table = NULL; + int index, num_tabs, bd_p_tab; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + dma_addr_t dma; + + if (usb_endpoint_xfer_isoc(ep->desc)) + num_tabs = NUM_TABLES_ISOCH; + else + num_tabs = NUM_TABLES; + + bd_p_tab = NUM_BDS_PER_TABLE; + /* if there is only 1 table in bd list then loop chain to self */ + dev_dbg(bdc->dev, + "%s ep:%p num_tabs:%d\n", + __func__, ep, num_tabs); + + /* Allocate memory for table array */ + ep->bd_list.bd_table_array = kzalloc( + num_tabs * sizeof(struct bd_table *), + GFP_ATOMIC); + if (!ep->bd_list.bd_table_array) + return -ENOMEM; + + /* Allocate memory for each table */ + for (index = 0; index < num_tabs; index++) { + /* Allocate memory for bd_table structure */ + bd_table = kzalloc(sizeof(struct bd_table), GFP_ATOMIC); + if (!bd_table) + goto fail; + + bd_table->start_bd = dma_pool_alloc(bdc->bd_table_pool, + GFP_ATOMIC, + &dma); + if (!bd_table->start_bd) + goto fail; + + bd_table->dma = dma; + + dev_dbg(bdc->dev, + "index:%d start_bd:%p dma=%08llx prev_table:%p\n", + index, bd_table->start_bd, + (unsigned long long)bd_table->dma, prev_table); + + ep->bd_list.bd_table_array[index] = bd_table; + memset(bd_table->start_bd, 0, bd_p_tab * sizeof(struct bdc_bd)); + if (prev_table) + chain_table(prev_table, bd_table, bd_p_tab); + + prev_table = bd_table; + } + chain_table(prev_table, ep->bd_list.bd_table_array[0], bd_p_tab); + /* Memory allocation is successful, now init the internal fields */ + ep->bd_list.num_tabs = num_tabs; + ep->bd_list.max_bdi = (num_tabs * bd_p_tab) - 1; + ep->bd_list.num_tabs = num_tabs; + ep->bd_list.num_bds_table = bd_p_tab; + ep->bd_list.eqp_bdi = 0; + ep->bd_list.hwd_bdi = 0; + + return 0; +fail: + /* Free the bd_table_array, bd_table struct, bd's */ + ep_bd_list_free(ep, num_tabs); + + return -ENOMEM; +} + +/* returns how many bd's are need for this transfer */ +static inline int bd_needed_req(struct bdc_req *req) +{ + int bd_needed = 0; + int remaining; + + /* 1 bd needed for 0 byte transfer */ + if (req->usb_req.length == 0) + return 1; + + /* remaining bytes after tranfering all max BD size BD's */ + remaining = req->usb_req.length % BD_MAX_BUFF_SIZE; + if (remaining) + bd_needed++; + + /* How many maximum BUFF size BD's ? */ + remaining = req->usb_req.length / BD_MAX_BUFF_SIZE; + bd_needed += remaining; + + return bd_needed; +} + +/* returns the bd index(bdi) corresponding to bd dma address */ +static int bd_add_to_bdi(struct bdc_ep *ep, dma_addr_t bd_dma_addr) +{ + struct bd_list *bd_list = &ep->bd_list; + dma_addr_t dma_first_bd, dma_last_bd; + struct bdc *bdc = ep->bdc; + struct bd_table *bd_table; + bool found = false; + int tbi, bdi; + + dma_first_bd = dma_last_bd = 0; + dev_dbg(bdc->dev, "%s %llx\n", + __func__, (unsigned long long)bd_dma_addr); + /* + * Find in which table this bd_dma_addr belongs?, go through the table + * array and compare addresses of first and last address of bd of each + * table + */ + for (tbi = 0; tbi < bd_list->num_tabs; tbi++) { + bd_table = bd_list->bd_table_array[tbi]; + dma_first_bd = bd_table->dma; + dma_last_bd = bd_table->dma + + (sizeof(struct bdc_bd) * + (bd_list->num_bds_table - 1)); + dev_dbg(bdc->dev, "dma_first_bd:%llx dma_last_bd:%llx\n", + (unsigned long long)dma_first_bd, + (unsigned long long)dma_last_bd); + if (bd_dma_addr >= dma_first_bd && bd_dma_addr <= dma_last_bd) { + found = true; + break; + } + } + if (unlikely(!found)) { + dev_err(bdc->dev, "%s FATAL err, bd not found\n", __func__); + return -EINVAL; + } + /* Now we know the table, find the bdi */ + bdi = (bd_dma_addr - dma_first_bd) / sizeof(struct bdc_bd); + + /* return the global bdi, to compare with ep eqp_bdi */ + return (bdi + (tbi * bd_list->num_bds_table)); +} + +/* returns the table index(tbi) of the given bdi */ +static int bdi_to_tbi(struct bdc_ep *ep, int bdi) +{ + int tbi; + + tbi = bdi / ep->bd_list.num_bds_table; + dev_vdbg(ep->bdc->dev, + "bdi:%d num_bds_table:%d tbi:%d\n", + bdi, ep->bd_list.num_bds_table, tbi); + + return tbi; +} + +/* Find the bdi last bd in the transfer */ +static inline int find_end_bdi(struct bdc_ep *ep, int next_hwd_bdi) +{ + int end_bdi; + + end_bdi = next_hwd_bdi - 1; + if (end_bdi < 0) + end_bdi = ep->bd_list.max_bdi - 1; + else if ((end_bdi % (ep->bd_list.num_bds_table-1)) == 0) + end_bdi--; + + return end_bdi; +} + +/* + * How many transfer bd's are available on this ep bdl, chain bds are not + * counted in available bds + */ +static int bd_available_ep(struct bdc_ep *ep) +{ + struct bd_list *bd_list = &ep->bd_list; + int available1, available2; + struct bdc *bdc = ep->bdc; + int chain_bd1, chain_bd2; + int available_bd = 0; + + available1 = available2 = chain_bd1 = chain_bd2 = 0; + /* if empty then we have all bd's available - number of chain bd's */ + if (bd_list->eqp_bdi == bd_list->hwd_bdi) + return bd_list->max_bdi - bd_list->num_tabs; + + /* + * Depending upon where eqp and dqp pointers are, caculate number + * of avaialble bd's + */ + if (bd_list->hwd_bdi < bd_list->eqp_bdi) { + /* available bd's are from eqp..max_bds + 0..dqp - chain_bds */ + available1 = bd_list->max_bdi - bd_list->eqp_bdi; + available2 = bd_list->hwd_bdi; + chain_bd1 = available1 / bd_list->num_bds_table; + chain_bd2 = available2 / bd_list->num_bds_table; + dev_vdbg(bdc->dev, "chain_bd1:%d chain_bd2:%d\n", + chain_bd1, chain_bd2); + available_bd = available1 + available2 - chain_bd1 - chain_bd2; + } else { + /* available bd's are from eqp..dqp - number of chain bd's */ + available1 = bd_list->hwd_bdi - bd_list->eqp_bdi; + /* if gap between eqp and dqp is less than NUM_BDS_PER_TABLE */ + if ((bd_list->hwd_bdi - bd_list->eqp_bdi) + <= bd_list->num_bds_table) { + /* If there any chain bd in between */ + if (!(bdi_to_tbi(ep, bd_list->hwd_bdi) + == bdi_to_tbi(ep, bd_list->eqp_bdi))) { + available_bd = available1 - 1; + } + } else { + chain_bd1 = available1 / bd_list->num_bds_table; + available_bd = available1 - chain_bd1; + } + } + /* + * we need to keep one extra bd to check if ring is full or empty so + * reduce by 1 + */ + available_bd--; + dev_vdbg(bdc->dev, "available_bd:%d\n", available_bd); + + return available_bd; +} + +/* Notify the hardware after queueing the bd to bdl */ +void bdc_notify_xfr(struct bdc *bdc, u32 epnum) +{ + struct bdc_ep *ep = bdc->bdc_ep_array[epnum]; + + dev_vdbg(bdc->dev, "%s epnum:%d\n", __func__, epnum); + /* + * We don't have anyway to check if ep state is running, + * except the software flags. + */ + if (unlikely(ep->flags & BDC_EP_STOP)) + ep->flags &= ~BDC_EP_STOP; + + bdc_writel(bdc->regs, BDC_XSFNTF, epnum); +} + +/* returns the bd corresponding to bdi */ +static struct bdc_bd *bdi_to_bd(struct bdc_ep *ep, int bdi) +{ + int tbi = bdi_to_tbi(ep, bdi); + int local_bdi = 0; + + local_bdi = bdi - (tbi * ep->bd_list.num_bds_table); + dev_vdbg(ep->bdc->dev, + "%s bdi:%d local_bdi:%d\n", + __func__, bdi, local_bdi); + + return (ep->bd_list.bd_table_array[tbi]->start_bd + local_bdi); +} + +/* Advance the enqueue pointer */ +static void ep_bdlist_eqp_adv(struct bdc_ep *ep) +{ + ep->bd_list.eqp_bdi++; + /* if it's chain bd, then move to next */ + if (((ep->bd_list.eqp_bdi + 1) % ep->bd_list.num_bds_table) == 0) + ep->bd_list.eqp_bdi++; + + /* if the eqp is pointing to last + 1 then move back to 0 */ + if (ep->bd_list.eqp_bdi == (ep->bd_list.max_bdi + 1)) + ep->bd_list.eqp_bdi = 0; +} + +/* Setup the first bd for ep0 transfer */ +static int setup_first_bd_ep0(struct bdc *bdc, struct bdc_req *req, u32 *dword3) +{ + u16 wValue; + u32 req_len; + + req->ep->dir = 0; + req_len = req->usb_req.length; + switch (bdc->ep0_state) { + case WAIT_FOR_DATA_START: + *dword3 |= BD_TYPE_DS; + if (bdc->setup_pkt.bRequestType & USB_DIR_IN) + *dword3 |= BD_DIR_IN; + + /* check if zlp will be needed */ + wValue = le16_to_cpu(bdc->setup_pkt.wValue); + if ((wValue > req_len) && + (req_len % bdc->gadget.ep0->maxpacket == 0)) { + dev_dbg(bdc->dev, "ZLP needed wVal:%d len:%d MaxP:%d\n", + wValue, req_len, + bdc->gadget.ep0->maxpacket); + bdc->zlp_needed = true; + } + break; + + case WAIT_FOR_STATUS_START: + *dword3 |= BD_TYPE_SS; + if (!le16_to_cpu(bdc->setup_pkt.wLength) || + !(bdc->setup_pkt.bRequestType & USB_DIR_IN)) + *dword3 |= BD_DIR_IN; + break; + default: + dev_err(bdc->dev, + "Unknown ep0 state for queueing bd ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + return -EINVAL; + } + + return 0; +} + +/* Setup the bd dma descriptor for a given request */ +static int setup_bd_list_xfr(struct bdc *bdc, struct bdc_req *req, int num_bds) +{ + dma_addr_t buf_add = req->usb_req.dma; + u32 maxp, tfs, dword2, dword3; + struct bd_transfer *bd_xfr; + struct bd_list *bd_list; + struct bdc_ep *ep; + struct bdc_bd *bd; + int ret, bdnum; + u32 req_len; + + ep = req->ep; + bd_list = &ep->bd_list; + bd_xfr = &req->bd_xfr; + bd_xfr->req = req; + bd_xfr->start_bdi = bd_list->eqp_bdi; + bd = bdi_to_bd(ep, bd_list->eqp_bdi); + req_len = req->usb_req.length; + maxp = usb_endpoint_maxp(ep->desc) & 0x7ff; + tfs = roundup(req->usb_req.length, maxp); + tfs = tfs/maxp; + dev_vdbg(bdc->dev, "%s ep:%s num_bds:%d tfs:%d r_len:%d bd:%p\n", + __func__, ep->name, num_bds, tfs, req_len, bd); + + for (bdnum = 0; bdnum < num_bds; bdnum++) { + dword2 = dword3 = 0; + /* First bd */ + if (!bdnum) { + dword3 |= BD_SOT|BD_SBF|(tfs<ep_num == 1) { + ret = setup_first_bd_ep0(bdc, req, &dword3); + if (ret) + return ret; + } + } + if (!req->ep->dir) + dword3 |= BD_ISP; + + if (req_len > BD_MAX_BUFF_SIZE) { + dword2 |= BD_MAX_BUFF_SIZE; + req_len -= BD_MAX_BUFF_SIZE; + } else { + /* this should be the last bd */ + dword2 |= req_len; + dword3 |= BD_IOC; + dword3 |= BD_EOT; + } + /* Currently only 1 INT target is supported */ + dword2 |= BD_INTR_TARGET(0); + bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi); + if (unlikely(!bd)) { + dev_err(bdc->dev, "Err bd pointing to wrong addr\n"); + return -EINVAL; + } + /* write bd */ + bd->offset[0] = cpu_to_le32(lower_32_bits(buf_add)); + bd->offset[1] = cpu_to_le32(upper_32_bits(buf_add)); + bd->offset[2] = cpu_to_le32(dword2); + bd->offset[3] = cpu_to_le32(dword3); + /* advance eqp pointer */ + ep_bdlist_eqp_adv(ep); + /* advance the buff pointer */ + buf_add += BD_MAX_BUFF_SIZE; + dev_vdbg(bdc->dev, "buf_add:%08llx req_len:%d bd:%p eqp:%d\n", + (unsigned long long)buf_add, req_len, bd, + ep->bd_list.eqp_bdi); + bd = bdi_to_bd(ep, ep->bd_list.eqp_bdi); + bd->offset[3] = cpu_to_le32(BD_SBF); + } + /* clear the STOP BD fetch bit from the first bd of this xfr */ + bd = bdi_to_bd(ep, bd_xfr->start_bdi); + bd->offset[3] &= cpu_to_le32(~BD_SBF); + /* the new eqp will be next hw dqp */ + bd_xfr->num_bds = num_bds; + bd_xfr->next_hwd_bdi = ep->bd_list.eqp_bdi; + /* everything is written correctly before notifying the HW */ + wmb(); + + return 0; +} + +/* Queue the xfr */ +static int bdc_queue_xfr(struct bdc *bdc, struct bdc_req *req) +{ + int num_bds, bd_available; + struct bdc_ep *ep; + int ret; + + ep = req->ep; + dev_dbg(bdc->dev, "%s req:%p\n", __func__, req); + dev_dbg(bdc->dev, "eqp_bdi:%d hwd_bdi:%d\n", + ep->bd_list.eqp_bdi, ep->bd_list.hwd_bdi); + + num_bds = bd_needed_req(req); + bd_available = bd_available_ep(ep); + + /* how many bd's are avaialble on ep */ + if (num_bds > bd_available) + return -ENOMEM; + + ret = setup_bd_list_xfr(bdc, req, num_bds); + if (ret) + return ret; + list_add_tail(&req->queue, &ep->queue); + bdc_dbg_bd_list(bdc, ep); + bdc_notify_xfr(bdc, ep->ep_num); + + return 0; +} + +/* callback to gadget layer when xfr completes */ +static void bdc_req_complete(struct bdc_ep *ep, struct bdc_req *req, + int status) +{ + struct bdc *bdc = ep->bdc; + + if (req == NULL || &req->queue == NULL || &req->usb_req == NULL) + return; + + dev_dbg(bdc->dev, "%s ep:%s status:%d\n", __func__, ep->name, status); + list_del(&req->queue); + req->usb_req.status = status; + usb_gadget_unmap_request(&bdc->gadget, &req->usb_req, ep->dir); + if (req->usb_req.complete) { + spin_unlock(&bdc->lock); + usb_gadget_giveback_request(&ep->usb_ep, &req->usb_req); + spin_lock(&bdc->lock); + } +} + +/* Disable the endpoint */ +int bdc_ep_disable(struct bdc_ep *ep) +{ + struct bdc_req *req; + struct bdc *bdc; + int ret; + + ret = 0; + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s() ep->ep_num=%d\n", __func__, ep->ep_num); + /* Stop the endpoint */ + ret = bdc_stop_ep(bdc, ep->ep_num); + + /* + * Intentionally don't check the ret value of stop, it can fail in + * disconnect scenarios, continue with dconfig + */ + /* de-queue any pending requests */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct bdc_req, + queue); + bdc_req_complete(ep, req, -ESHUTDOWN); + } + /* deconfigure the endpoint */ + ret = bdc_dconfig_ep(bdc, ep); + if (ret) + dev_warn(bdc->dev, + "dconfig fail but continue with memory free"); + + ep->flags = 0; + /* ep0 memory is not freed, but reused on next connect sr */ + if (ep->ep_num == 1) + return 0; + + /* Free the bdl memory */ + ep_bd_list_free(ep, ep->bd_list.num_tabs); + ep->desc = NULL; + ep->comp_desc = NULL; + ep->usb_ep.desc = NULL; + ep->ep_type = 0; + + return ret; +} + +/* Enable the ep */ +int bdc_ep_enable(struct bdc_ep *ep) +{ + struct bdc *bdc; + int ret = 0; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s NUM_TABLES:%d %d\n", + __func__, NUM_TABLES, NUM_TABLES_ISOCH); + + ret = ep_bd_list_alloc(ep); + if (ret) { + dev_err(bdc->dev, "ep bd list allocation failed:%d\n", ret); + return -ENOMEM; + } + bdc_dbg_bd_list(bdc, ep); + /* only for ep0: config ep is called for ep0 from connect event */ + ep->flags |= BDC_EP_ENABLED; + if (ep->ep_num == 1) + return ret; + + /* Issue a configure endpoint command */ + ret = bdc_config_ep(bdc, ep); + if (ret) + return ret; + + ep->usb_ep.maxpacket = usb_endpoint_maxp(ep->desc); + ep->usb_ep.desc = ep->desc; + ep->usb_ep.comp_desc = ep->comp_desc; + ep->ep_type = usb_endpoint_type(ep->desc); + ep->flags |= BDC_EP_ENABLED; + + return 0; +} + +/* EP0 related code */ + +/* Queue a status stage BD */ +static int ep0_queue_status_stage(struct bdc *bdc) +{ + struct bdc_req *status_req; + struct bdc_ep *ep; + + status_req = &bdc->status_req; + ep = bdc->bdc_ep_array[1]; + status_req->ep = ep; + status_req->usb_req.length = 0; + status_req->usb_req.status = -EINPROGRESS; + status_req->usb_req.actual = 0; + status_req->usb_req.complete = NULL; + bdc_queue_xfr(bdc, status_req); + + return 0; +} + +/* Queue xfr on ep0 */ +static int ep0_queue(struct bdc_ep *ep, struct bdc_req *req) +{ + struct bdc *bdc; + int ret; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s()\n", __func__); + req->usb_req.actual = 0; + req->usb_req.status = -EINPROGRESS; + req->epnum = ep->ep_num; + + if (bdc->delayed_status) { + bdc->delayed_status = false; + /* if status stage was delayed? */ + if (bdc->ep0_state == WAIT_FOR_STATUS_START) { + /* Queue a status stage BD */ + ep0_queue_status_stage(bdc); + bdc->ep0_state = WAIT_FOR_STATUS_XMIT; + return 0; + } + } else { + /* + * if delayed status is false and 0 length transfer is requested + * i.e. for status stage of some setup request, then just + * return from here the status stage is queued independently + */ + if (req->usb_req.length == 0) + return 0; + + } + ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir); + if (ret) { + dev_err(bdc->dev, "dma mapping failed %s\n", ep->name); + return ret; + } + + return bdc_queue_xfr(bdc, req); +} + +/* Queue data stage */ +static int ep0_queue_data_stage(struct bdc *bdc) +{ + struct usb_request *ep0_usb_req; + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s\n", __func__); + ep0_usb_req = &bdc->ep0_req.usb_req; + ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.ep = ep; + bdc->ep0_req.usb_req.complete = NULL; + + return ep0_queue(ep, &bdc->ep0_req); +} + +/* Queue req on ep */ +static int ep_queue(struct bdc_ep *ep, struct bdc_req *req) +{ + struct bdc *bdc; + int ret = 0; + + if (!req || !ep->usb_ep.desc) + return -EINVAL; + + bdc = ep->bdc; + + req->usb_req.actual = 0; + req->usb_req.status = -EINPROGRESS; + req->epnum = ep->ep_num; + + ret = usb_gadget_map_request(&bdc->gadget, &req->usb_req, ep->dir); + if (ret) { + dev_err(bdc->dev, "dma mapping failed\n"); + return ret; + } + + return bdc_queue_xfr(bdc, req); +} + +/* Dequeue a request from ep */ +static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req) +{ + int start_bdi, end_bdi, tbi, eqp_bdi, curr_hw_dqpi; + bool start_pending, end_pending; + bool first_remove = false; + struct bdc_req *first_req; + struct bdc_bd *bd_start; + struct bd_table *table; + dma_addr_t next_bd_dma; + u64 deq_ptr_64 = 0; + struct bdc *bdc; + u32 tmp_32; + int ret; + + bdc = ep->bdc; + start_pending = end_pending = false; + eqp_bdi = ep->bd_list.eqp_bdi - 1; + + if (eqp_bdi < 0) + eqp_bdi = ep->bd_list.max_bdi; + + start_bdi = req->bd_xfr.start_bdi; + end_bdi = find_end_bdi(ep, req->bd_xfr.next_hwd_bdi); + + dev_dbg(bdc->dev, "%s ep:%s start:%d end:%d\n", + __func__, ep->name, start_bdi, end_bdi); + dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n", + ep, (void *)ep->usb_ep.desc); + /* Stop the ep to see where the HW is ? */ + ret = bdc_stop_ep(bdc, ep->ep_num); + /* if there is an issue with stopping ep, then no need to go further */ + if (ret) + return 0; + + /* + * After endpoint is stopped, there can be 3 cases, the request + * is processed, pending or in the middle of processing + */ + + /* The current hw dequeue pointer */ + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(0)); + deq_ptr_64 = tmp_32; + tmp_32 = bdc_readl(bdc->regs, BDC_EPSTS0(1)); + deq_ptr_64 |= ((u64)tmp_32 << 32); + + /* we have the dma addr of next bd that will be fetched by hardware */ + curr_hw_dqpi = bd_add_to_bdi(ep, deq_ptr_64); + if (curr_hw_dqpi < 0) + return curr_hw_dqpi; + + /* + * curr_hw_dqpi points to actual dqp of HW and HW owns bd's from + * curr_hw_dqbdi..eqp_bdi. + */ + + /* Check if start_bdi and end_bdi are in range of HW owned BD's */ + if (curr_hw_dqpi > eqp_bdi) { + /* there is a wrap from last to 0 */ + if (start_bdi >= curr_hw_dqpi || start_bdi <= eqp_bdi) { + start_pending = true; + end_pending = true; + } else if (end_bdi >= curr_hw_dqpi || end_bdi <= eqp_bdi) { + end_pending = true; + } + } else { + if (start_bdi >= curr_hw_dqpi) { + start_pending = true; + end_pending = true; + } else if (end_bdi >= curr_hw_dqpi) { + end_pending = true; + } + } + dev_dbg(bdc->dev, + "start_pending:%d end_pending:%d speed:%d\n", + start_pending, end_pending, bdc->gadget.speed); + + /* If both start till end are processes, we cannot deq req */ + if (!start_pending && !end_pending) + return -EINVAL; + + /* + * if ep_dequeue is called after disconnect then just return + * success from here + */ + if (bdc->gadget.speed == USB_SPEED_UNKNOWN) + return 0; + tbi = bdi_to_tbi(ep, req->bd_xfr.next_hwd_bdi); + table = ep->bd_list.bd_table_array[tbi]; + next_bd_dma = table->dma + + sizeof(struct bdc_bd)*(req->bd_xfr.next_hwd_bdi - + tbi * ep->bd_list.num_bds_table); + + first_req = list_first_entry(&ep->queue, struct bdc_req, + queue); + + if (req == first_req) + first_remove = true; + + /* + * Due to HW limitation we need to bypadd chain bd's and issue ep_bla, + * incase if start is pending this is the first request in the list + * then issue ep_bla instead of marking as chain bd + */ + if (start_pending && !first_remove) { + /* + * Mark the start bd as Chain bd, and point the chain + * bd to next_bd_dma + */ + bd_start = bdi_to_bd(ep, start_bdi); + bd_start->offset[0] = cpu_to_le32(lower_32_bits(next_bd_dma)); + bd_start->offset[1] = cpu_to_le32(upper_32_bits(next_bd_dma)); + bd_start->offset[2] = 0x0; + bd_start->offset[3] = cpu_to_le32(MARK_CHAIN_BD); + bdc_dbg_bd_list(bdc, ep); + } else if (end_pending) { + /* + * The transfer is stopped in the middle, move the + * HW deq pointer to next_bd_dma + */ + ret = bdc_ep_bla(bdc, ep, next_bd_dma); + if (ret) { + dev_err(bdc->dev, "error in ep_bla:%d\n", ret); + return ret; + } + } + + return 0; +} + +/* Halt/Clear the ep based on value */ +static int ep_set_halt(struct bdc_ep *ep, u32 value) +{ + struct bdc *bdc; + int ret; + + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value); + + if (value) { + dev_dbg(bdc->dev, "Halt\n"); + if (ep->ep_num == 1) + bdc->ep0_state = WAIT_FOR_SETUP; + + ret = bdc_ep_set_stall(bdc, ep->ep_num); + if (ret) + dev_err(bdc->dev, "failed to set STALL on %s\n", + ep->name); + else + ep->flags |= BDC_EP_STALL; + } else { + /* Clear */ + dev_dbg(bdc->dev, "Before Clear\n"); + ret = bdc_ep_clear_stall(bdc, ep->ep_num); + if (ret) + dev_err(bdc->dev, "failed to clear STALL on %s\n", + ep->name); + else + ep->flags &= ~BDC_EP_STALL; + dev_dbg(bdc->dev, "After Clear\n"); + } + + return ret; +} + +/* Free all the ep */ +void bdc_free_ep(struct bdc *bdc) +{ + struct bdc_ep *ep; + u8 epnum; + + dev_dbg(bdc->dev, "%s\n", __func__); + for (epnum = 1; epnum < bdc->num_eps; epnum++) { + ep = bdc->bdc_ep_array[epnum]; + if (!ep) + continue; + + if (ep->flags & BDC_EP_ENABLED) + ep_bd_list_free(ep, ep->bd_list.num_tabs); + + /* ep0 is not in this gadget list */ + if (epnum != 1) + list_del(&ep->usb_ep.ep_list); + + kfree(ep); + } +} + +/* USB2 spec, section 7.1.20 */ +static int bdc_set_test_mode(struct bdc *bdc) +{ + u32 usb2_pm; + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + usb2_pm &= ~BDC_PTC_MASK; + dev_dbg(bdc->dev, "%s\n", __func__); + switch (bdc->test_mode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + usb2_pm |= bdc->test_mode << 28; + break; + default: + return -EINVAL; + } + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + return 0; +} + +/* + * Helper function to handle Transfer status report with status as either + * success or short + */ +static void handle_xsr_succ_status(struct bdc *bdc, struct bdc_ep *ep, + struct bdc_sr *sreport) +{ + int short_bdi, start_bdi, end_bdi, max_len_bds, chain_bds; + struct bd_list *bd_list = &ep->bd_list; + int actual_length, length_short; + struct bd_transfer *bd_xfr; + struct bdc_bd *short_bd; + struct bdc_req *req; + u64 deq_ptr_64 = 0; + int status = 0; + int sr_status; + u32 tmp_32; + + dev_dbg(bdc->dev, "%s ep:%p\n", __func__, ep); + bdc_dbg_srr(bdc, 0); + /* do not process thie sr if ignore flag is set */ + if (ep->ignore_next_sr) { + ep->ignore_next_sr = false; + return; + } + + if (unlikely(list_empty(&ep->queue))) { + dev_warn(bdc->dev, "xfr srr with no BD's queued\n"); + return; + } + req = list_entry(ep->queue.next, struct bdc_req, + queue); + + bd_xfr = &req->bd_xfr; + sr_status = XSF_STS(le32_to_cpu(sreport->offset[3])); + + /* + * sr_status is short and this transfer has more than 1 bd then it needs + * special handling, this is only applicable for bulk and ctrl + */ + if (sr_status == XSF_SHORT && bd_xfr->num_bds > 1) { + /* + * This is multi bd xfr, lets see which bd + * caused short transfer and how many bytes have been + * transferred so far. + */ + tmp_32 = le32_to_cpu(sreport->offset[0]); + deq_ptr_64 = tmp_32; + tmp_32 = le32_to_cpu(sreport->offset[1]); + deq_ptr_64 |= ((u64)tmp_32 << 32); + short_bdi = bd_add_to_bdi(ep, deq_ptr_64); + if (unlikely(short_bdi < 0)) + dev_warn(bdc->dev, "bd doesn't exist?\n"); + + start_bdi = bd_xfr->start_bdi; + /* + * We know the start_bdi and short_bdi, how many xfr + * bds in between + */ + if (start_bdi <= short_bdi) { + max_len_bds = short_bdi - start_bdi; + if (max_len_bds <= bd_list->num_bds_table) { + if (!(bdi_to_tbi(ep, start_bdi) == + bdi_to_tbi(ep, short_bdi))) + max_len_bds--; + } else { + chain_bds = max_len_bds/bd_list->num_bds_table; + max_len_bds -= chain_bds; + } + } else { + /* there is a wrap in the ring within a xfr */ + chain_bds = (bd_list->max_bdi - start_bdi)/ + bd_list->num_bds_table; + chain_bds += short_bdi/bd_list->num_bds_table; + max_len_bds = bd_list->max_bdi - start_bdi; + max_len_bds += short_bdi; + max_len_bds -= chain_bds; + } + /* max_len_bds is the number of full length bds */ + end_bdi = find_end_bdi(ep, bd_xfr->next_hwd_bdi); + if (!(end_bdi == short_bdi)) + ep->ignore_next_sr = true; + + actual_length = max_len_bds * BD_MAX_BUFF_SIZE; + short_bd = bdi_to_bd(ep, short_bdi); + /* length queued */ + length_short = le32_to_cpu(short_bd->offset[2]) & 0x1FFFFF; + /* actual length trensfered */ + length_short -= SR_BD_LEN(le32_to_cpu(sreport->offset[2])); + actual_length += length_short; + req->usb_req.actual = actual_length; + } else { + req->usb_req.actual = req->usb_req.length - + SR_BD_LEN(le32_to_cpu(sreport->offset[2])); + dev_dbg(bdc->dev, + "len=%d actual=%d bd_xfr->next_hwd_bdi:%d\n", + req->usb_req.length, req->usb_req.actual, + bd_xfr->next_hwd_bdi); + } + + /* Update the dequeue pointer */ + ep->bd_list.hwd_bdi = bd_xfr->next_hwd_bdi; + if (req->usb_req.actual < req->usb_req.length) { + dev_dbg(bdc->dev, "short xfr on %d\n", ep->ep_num); + if (req->usb_req.short_not_ok) + status = -EREMOTEIO; + } + bdc_req_complete(ep, bd_xfr->req, status); +} + +/* EP0 setup related packet handlers */ + +/* + * Setup packet received, just store the packet and process on next DS or SS + * started SR + */ +void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct usb_ctrlrequest *setup_pkt; + u32 len; + + dev_dbg(bdc->dev, + "%s ep0_state:%s\n", + __func__, ep0_state_string[bdc->ep0_state]); + /* Store received setup packet */ + setup_pkt = &bdc->setup_pkt; + memcpy(setup_pkt, &sreport->offset[0], sizeof(*setup_pkt)); + len = le16_to_cpu(setup_pkt->wLength); + if (!len) + bdc->ep0_state = WAIT_FOR_STATUS_START; + else + bdc->ep0_state = WAIT_FOR_DATA_START; + + + dev_dbg(bdc->dev, + "%s exit ep0_state:%s\n", + __func__, ep0_state_string[bdc->ep0_state]); +} + +/* Stall ep0 */ +static void ep0_stall(struct bdc *bdc) +{ + struct bdc_ep *ep = bdc->bdc_ep_array[1]; + struct bdc_req *req; + + dev_dbg(bdc->dev, "%s\n", __func__); + bdc->delayed_status = false; + ep_set_halt(ep, 1); + + /* de-queue any pendig requests */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct bdc_req, + queue); + bdc_req_complete(ep, req, -ESHUTDOWN); + } +} + +/* SET_ADD handlers */ +static int ep0_set_address(struct bdc *bdc, struct usb_ctrlrequest *ctrl) +{ + enum usb_device_state state = bdc->gadget.state; + int ret = 0; + u32 addr; + + addr = le16_to_cpu(ctrl->wValue); + dev_dbg(bdc->dev, + "%s addr:%d dev state:%d\n", + __func__, addr, state); + + if (addr > 127) + return -EINVAL; + + switch (state) { + case USB_STATE_DEFAULT: + case USB_STATE_ADDRESS: + /* Issue Address device command */ + ret = bdc_address_device(bdc, addr); + if (ret) + return ret; + + if (addr) + usb_gadget_set_state(&bdc->gadget, USB_STATE_ADDRESS); + else + usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT); + + bdc->dev_addr = addr; + break; + default: + dev_warn(bdc->dev, + "SET Address in wrong device state %d\n", + state); + ret = -EINVAL; + } + + return ret; +} + +/* Handler for SET/CLEAR FEATURE requests for device */ +static int ep0_handle_feature_dev(struct bdc *bdc, u16 wValue, + u16 wIndex, bool set) +{ + enum usb_device_state state = bdc->gadget.state; + u32 usppms = 0; + + dev_dbg(bdc->dev, "%s set:%d dev state:%d\n", + __func__, set, state); + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + dev_dbg(bdc->dev, "USB_DEVICE_REMOTE_WAKEUP\n"); + if (set) + bdc->devstatus |= REMOTE_WAKE_ENABLE; + else + bdc->devstatus &= ~REMOTE_WAKE_ENABLE; + break; + + case USB_DEVICE_TEST_MODE: + dev_dbg(bdc->dev, "USB_DEVICE_TEST_MODE\n"); + if ((wIndex & 0xFF) || + (bdc->gadget.speed != USB_SPEED_HIGH) || !set) + return -EINVAL; + + bdc->test_mode = wIndex >> 8; + break; + + case USB_DEVICE_U1_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_U1_ENABLE\n"); + + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + if (set) { + /* clear previous u1t */ + usppms &= ~BDC_U1T(BDC_U1T_MASK); + usppms |= BDC_U1T(U1_TIMEOUT); + usppms |= BDC_U1E | BDC_PORT_W1S; + bdc->devstatus |= (1 << USB_DEV_STAT_U1_ENABLED); + } else { + usppms &= ~BDC_U1E; + usppms |= BDC_PORT_W1S; + bdc->devstatus &= ~(1 << USB_DEV_STAT_U1_ENABLED); + } + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case USB_DEVICE_U2_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_U2_ENABLE\n"); + + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + if (set) { + usppms |= BDC_U2E; + usppms |= BDC_U2A; + bdc->devstatus |= (1 << USB_DEV_STAT_U2_ENABLED); + } else { + usppms &= ~BDC_U2E; + usppms &= ~BDC_U2A; + bdc->devstatus &= ~(1 << USB_DEV_STAT_U2_ENABLED); + } + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case USB_DEVICE_LTM_ENABLE: + dev_dbg(bdc->dev, "USB_DEVICE_LTM_ENABLE?\n"); + if (bdc->gadget.speed != USB_SPEED_SUPER || + state != USB_STATE_CONFIGURED) + return -EINVAL; + break; + default: + dev_err(bdc->dev, "Unknown wValue:%d\n", wValue); + return -EOPNOTSUPP; + } /* USB_RECIP_DEVICE end */ + + return 0; +} + +/* SET/CLEAR FEATURE handler */ +static int ep0_handle_feature(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt, bool set) +{ + enum usb_device_state state = bdc->gadget.state; + struct bdc_ep *ep; + u16 wValue; + u16 wIndex; + int epnum; + + wValue = le16_to_cpu(setup_pkt->wValue); + wIndex = le16_to_cpu(setup_pkt->wIndex); + + dev_dbg(bdc->dev, + "%s wValue=%d wIndex=%d devstate=%08x speed=%d set=%d", + __func__, wValue, wIndex, state, + bdc->gadget.speed, set); + + switch (setup_pkt->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + return ep0_handle_feature_dev(bdc, wValue, wIndex, set); + case USB_RECIP_INTERFACE: + dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n"); + /* USB3 spec, sec 9.4.9 */ + if (wValue != USB_INTRF_FUNC_SUSPEND) + return -EINVAL; + /* USB3 spec, Table 9-8 */ + if (set) { + if (wIndex & USB_INTRF_FUNC_SUSPEND_RW) { + dev_dbg(bdc->dev, "SET REMOTE_WAKEUP\n"); + bdc->devstatus |= REMOTE_WAKE_ENABLE; + } else { + dev_dbg(bdc->dev, "CLEAR REMOTE_WAKEUP\n"); + bdc->devstatus &= ~REMOTE_WAKE_ENABLE; + } + } + break; + + case USB_RECIP_ENDPOINT: + dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n"); + if (wValue != USB_ENDPOINT_HALT) + return -EINVAL; + + epnum = wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) { + if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum = epnum * 2 + 1; + else + epnum *= 2; + } else { + epnum = 1; /*EP0*/ + } + /* + * If CLEAR_FEATURE on ep0 then don't do anything as the stall + * condition on ep0 has already been cleared when SETUP packet + * was received. + */ + if (epnum == 1 && !set) { + dev_dbg(bdc->dev, "ep0 stall already cleared\n"); + return 0; + } + dev_dbg(bdc->dev, "epnum=%d\n", epnum); + ep = bdc->bdc_ep_array[epnum]; + if (!ep) + return -EINVAL; + + return ep_set_halt(ep, set); + default: + dev_err(bdc->dev, "Unknown recipient\n"); + return -EINVAL; + } + + return 0; +} + +/* GET_STATUS request handler */ +static int ep0_handle_status(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt) +{ + enum usb_device_state state = bdc->gadget.state; + struct bdc_ep *ep; + u16 usb_status = 0; + u32 epnum; + u16 wIndex; + + /* USB2.0 spec sec 9.4.5 */ + if (state == USB_STATE_DEFAULT) + return -EINVAL; + wIndex = le16_to_cpu(setup_pkt->wIndex); + dev_dbg(bdc->dev, "%s\n", __func__); + usb_status = bdc->devstatus; + switch (setup_pkt->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + dev_dbg(bdc->dev, + "USB_RECIP_DEVICE devstatus:%08x\n", + bdc->devstatus); + /* USB3 spec, sec 9.4.5 */ + if (bdc->gadget.speed == USB_SPEED_SUPER) + usb_status &= ~REMOTE_WAKE_ENABLE; + break; + + case USB_RECIP_INTERFACE: + dev_dbg(bdc->dev, "USB_RECIP_INTERFACE\n"); + if (bdc->gadget.speed == USB_SPEED_SUPER) { + /* + * This should come from func for Func remote wkup + * usb_status |=1; + */ + if (bdc->devstatus & REMOTE_WAKE_ENABLE) + usb_status |= REMOTE_WAKE_ENABLE; + } else { + usb_status = 0; + } + + break; + + case USB_RECIP_ENDPOINT: + dev_dbg(bdc->dev, "USB_RECIP_ENDPOINT\n"); + epnum = wIndex & USB_ENDPOINT_NUMBER_MASK; + if (epnum) { + if ((wIndex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + epnum = epnum*2 + 1; + else + epnum *= 2; + } else { + epnum = 1; /* EP0 */ + } + + ep = bdc->bdc_ep_array[epnum]; + if (!ep) { + dev_err(bdc->dev, "ISSUE, GET_STATUS for invalid EP ?"); + return -EINVAL; + } + if (ep->flags & BDC_EP_STALL) + usb_status |= 1 << USB_ENDPOINT_HALT; + + break; + default: + dev_err(bdc->dev, "Unknown recipient for get_status\n"); + return -EINVAL; + } + /* prepare a data stage for GET_STATUS */ + dev_dbg(bdc->dev, "usb_status=%08x\n", usb_status); + *(__le16 *)bdc->ep0_response_buff = cpu_to_le16(usb_status); + bdc->ep0_req.usb_req.length = 2; + bdc->ep0_req.usb_req.buf = &bdc->ep0_response_buff; + ep0_queue_data_stage(bdc); + + return 0; +} + +static void ep0_set_sel_cmpl(struct usb_ep *_ep, struct usb_request *_req) +{ + /* ep0_set_sel_cmpl */ +} + +/* Queue data stage to handle 6 byte SET_SEL request */ +static int ep0_set_sel(struct bdc *bdc, + struct usb_ctrlrequest *setup_pkt) +{ + struct bdc_ep *ep; + u16 wLength; + u16 wValue; + + dev_dbg(bdc->dev, "%s\n", __func__); + wValue = le16_to_cpu(setup_pkt->wValue); + wLength = le16_to_cpu(setup_pkt->wLength); + if (unlikely(wLength != 6)) { + dev_err(bdc->dev, "%s Wrong wLength:%d\n", __func__, wLength); + return -EINVAL; + } + ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.ep = ep; + bdc->ep0_req.usb_req.length = 6; + bdc->ep0_req.usb_req.buf = bdc->ep0_response_buff; + bdc->ep0_req.usb_req.complete = ep0_set_sel_cmpl; + ep0_queue_data_stage(bdc); + + return 0; +} + +/* + * Queue a 0 byte bd only if wLength is more than the length and and length is + * a multiple of MaxPacket then queue 0 byte BD + */ +static int ep0_queue_zlp(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + bdc->ep0_req.ep = bdc->bdc_ep_array[1]; + bdc->ep0_req.usb_req.length = 0; + bdc->ep0_req.usb_req.complete = NULL; + bdc->ep0_state = WAIT_FOR_DATA_START; + ret = bdc_queue_xfr(bdc, &bdc->ep0_req); + if (ret) { + dev_err(bdc->dev, "err queueing zlp :%d\n", ret); + return ret; + } + bdc->ep0_state = WAIT_FOR_DATA_XMIT; + + return 0; +} + +/* Control request handler */ +static int handle_control_request(struct bdc *bdc) +{ + enum usb_device_state state = bdc->gadget.state; + struct usb_ctrlrequest *setup_pkt; + int delegate_setup = 0; + int ret = 0; + int config = 0; + + setup_pkt = &bdc->setup_pkt; + dev_dbg(bdc->dev, "%s\n", __func__); + if ((setup_pkt->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (setup_pkt->bRequest) { + case USB_REQ_SET_ADDRESS: + dev_dbg(bdc->dev, "USB_REQ_SET_ADDRESS\n"); + ret = ep0_set_address(bdc, setup_pkt); + bdc->devstatus &= DEVSTATUS_CLEAR; + break; + + case USB_REQ_SET_CONFIGURATION: + dev_dbg(bdc->dev, "USB_REQ_SET_CONFIGURATION\n"); + if (state == USB_STATE_ADDRESS) { + usb_gadget_set_state(&bdc->gadget, + USB_STATE_CONFIGURED); + } else if (state == USB_STATE_CONFIGURED) { + /* + * USB2 spec sec 9.4.7, if wValue is 0 then dev + * is moved to addressed state + */ + config = le16_to_cpu(setup_pkt->wValue); + if (!config) + usb_gadget_set_state( + &bdc->gadget, + USB_STATE_ADDRESS); + } + delegate_setup = 1; + break; + + case USB_REQ_SET_FEATURE: + dev_dbg(bdc->dev, "USB_REQ_SET_FEATURE\n"); + ret = ep0_handle_feature(bdc, setup_pkt, 1); + break; + + case USB_REQ_CLEAR_FEATURE: + dev_dbg(bdc->dev, "USB_REQ_CLEAR_FEATURE\n"); + ret = ep0_handle_feature(bdc, setup_pkt, 0); + break; + + case USB_REQ_GET_STATUS: + dev_dbg(bdc->dev, "USB_REQ_GET_STATUS\n"); + ret = ep0_handle_status(bdc, setup_pkt); + break; + + case USB_REQ_SET_SEL: + dev_dbg(bdc->dev, "USB_REQ_SET_SEL\n"); + ret = ep0_set_sel(bdc, setup_pkt); + break; + + case USB_REQ_SET_ISOCH_DELAY: + dev_warn(bdc->dev, + "USB_REQ_SET_ISOCH_DELAY not handled\n"); + ret = 0; + break; + default: + delegate_setup = 1; + } + } else { + delegate_setup = 1; + } + + if (delegate_setup) { + spin_unlock(&bdc->lock); + ret = bdc->gadget_driver->setup(&bdc->gadget, setup_pkt); + spin_lock(&bdc->lock); + } + + return ret; +} + +/* EP0: Data stage started */ +void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct bdc_ep *ep; + int ret = 0; + + dev_dbg(bdc->dev, "%s\n", __func__); + ep = bdc->bdc_ep_array[1]; + /* If ep0 was stalled, the clear it first */ + if (ep->flags & BDC_EP_STALL) { + ret = ep_set_halt(ep, 0); + if (ret) + goto err; + } + if (bdc->ep0_state != WAIT_FOR_DATA_START) + dev_warn(bdc->dev, + "Data stage not expected ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + ret = handle_control_request(bdc); + if (ret == USB_GADGET_DELAYED_STATUS) { + /* + * The ep0 state will remain WAIT_FOR_DATA_START till + * we received ep_queue on ep0 + */ + bdc->delayed_status = true; + return; + } + if (!ret) { + bdc->ep0_state = WAIT_FOR_DATA_XMIT; + dev_dbg(bdc->dev, + "ep0_state:%s", ep0_state_string[bdc->ep0_state]); + return; + } +err: + ep0_stall(bdc); +} + +/* EP0: status stage started */ +void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct usb_ctrlrequest *setup_pkt; + struct bdc_ep *ep; + int ret = 0; + + dev_dbg(bdc->dev, + "%s ep0_state:%s", + __func__, ep0_state_string[bdc->ep0_state]); + ep = bdc->bdc_ep_array[1]; + + /* check if ZLP was queued? */ + if (bdc->zlp_needed) + bdc->zlp_needed = false; + + if (ep->flags & BDC_EP_STALL) { + ret = ep_set_halt(ep, 0); + if (ret) + goto err; + } + + if ((bdc->ep0_state != WAIT_FOR_STATUS_START) && + (bdc->ep0_state != WAIT_FOR_DATA_XMIT)) + dev_err(bdc->dev, + "Status stage recv but ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + /* check if data stage is in progress ? */ + if (bdc->ep0_state == WAIT_FOR_DATA_XMIT) { + bdc->ep0_state = STATUS_PENDING; + /* Status stage will be queued upon Data stage transmit event */ + dev_dbg(bdc->dev, + "status started but data not transmitted yet\n"); + return; + } + setup_pkt = &bdc->setup_pkt; + + /* + * 2 stage setup then only process the setup, for 3 stage setup the date + * stage is already handled + */ + if (!le16_to_cpu(setup_pkt->wLength)) { + ret = handle_control_request(bdc); + if (ret == USB_GADGET_DELAYED_STATUS) { + bdc->delayed_status = true; + /* ep0_state will remain WAIT_FOR_STATUS_START */ + return; + } + } + if (!ret) { + /* Queue a status stage BD */ + ep0_queue_status_stage(bdc); + bdc->ep0_state = WAIT_FOR_STATUS_XMIT; + dev_dbg(bdc->dev, + "ep0_state:%s", ep0_state_string[bdc->ep0_state]); + return; + } +err: + ep0_stall(bdc); +} + +/* Helper function to update ep0 upon SR with xsf_succ or xsf_short */ +static void ep0_xsf_complete(struct bdc *bdc, struct bdc_sr *sreport) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + switch (bdc->ep0_state) { + case WAIT_FOR_DATA_XMIT: + bdc->ep0_state = WAIT_FOR_STATUS_START; + break; + case WAIT_FOR_STATUS_XMIT: + bdc->ep0_state = WAIT_FOR_SETUP; + if (bdc->test_mode) { + int ret; + + dev_dbg(bdc->dev, "test_mode:%d\n", bdc->test_mode); + ret = bdc_set_test_mode(bdc); + if (ret < 0) { + dev_err(bdc->dev, "Err in setting Test mode\n"); + return; + } + bdc->test_mode = 0; + } + break; + case STATUS_PENDING: + bdc_xsf_ep0_status_start(bdc, sreport); + break; + + default: + dev_err(bdc->dev, + "Unknown ep0_state:%s\n", + ep0_state_string[bdc->ep0_state]); + + } +} + +/* xfr completion status report handler */ +void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport) +{ + struct bdc_ep *ep; + u32 sr_status; + u8 ep_num; + + ep_num = (le32_to_cpu(sreport->offset[3])>>4) & 0x1f; + ep = bdc->bdc_ep_array[ep_num]; + if (!ep || !(ep->flags & BDC_EP_ENABLED)) { + dev_err(bdc->dev, "xsf for ep not enabled\n"); + return; + } + /* + * check if this transfer is after link went from U3->U0 due + * to remote wakeup + */ + if (bdc->devstatus & FUNC_WAKE_ISSUED) { + bdc->devstatus &= ~(FUNC_WAKE_ISSUED); + dev_dbg(bdc->dev, "%s clearing FUNC_WAKE_ISSUED flag\n", + __func__); + } + sr_status = XSF_STS(le32_to_cpu(sreport->offset[3])); + dev_dbg_ratelimited(bdc->dev, "%s sr_status=%d ep:%s\n", + __func__, sr_status, ep->name); + + switch (sr_status) { + case XSF_SUCC: + case XSF_SHORT: + handle_xsr_succ_status(bdc, ep, sreport); + if (ep_num == 1) + ep0_xsf_complete(bdc, sreport); + break; + + case XSF_SETUP_RECV: + case XSF_DATA_START: + case XSF_STATUS_START: + if (ep_num != 1) { + dev_err(bdc->dev, + "ep0 related packets on non ep0 endpoint"); + return; + } + bdc->sr_xsf_ep0[sr_status - XSF_SETUP_RECV](bdc, sreport); + break; + + case XSF_BABB: + if (ep_num == 1) { + dev_dbg(bdc->dev, "Babble on ep0 zlp_need:%d\n", + bdc->zlp_needed); + /* + * If the last completed transfer had wLength >Data Len, + * and Len is multiple of MaxPacket,then queue ZLP + */ + if (bdc->zlp_needed) { + /* queue 0 length bd */ + ep0_queue_zlp(bdc); + return; + } + } + dev_warn(bdc->dev, "Babble on ep not handled\n"); + break; + default: + dev_warn(bdc->dev, "sr status not handled:%x\n", sr_status); + break; + } +} + +static int bdc_gadget_ep_queue(struct usb_ep *_ep, + struct usb_request *_req, gfp_t gfp_flags) +{ + struct bdc_req *req; + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !_ep->desc) + return -ESHUTDOWN; + + if (!_req || !_req->complete || !_req->buf) + return -EINVAL; + + ep = to_bdc_ep(_ep); + req = to_bdc_req(_req); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%p req:%p\n", __func__, ep, req); + dev_dbg(bdc->dev, "queuing request %p to %s length %d zero:%d\n", + _req, ep->name, _req->length, _req->zero); + + if (!ep->usb_ep.desc) { + dev_warn(bdc->dev, + "trying to queue req %p to disabled %s\n", + _req, ep->name); + return -ESHUTDOWN; + } + + if (_req->length > MAX_XFR_LEN) { + dev_warn(bdc->dev, + "req length > supported MAX:%d requested:%d\n", + MAX_XFR_LEN, _req->length); + return -EOPNOTSUPP; + } + spin_lock_irqsave(&bdc->lock, flags); + if (ep == bdc->bdc_ep_array[1]) + ret = ep0_queue(ep, req); + else + ret = ep_queue(ep, req); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_dequeue(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct bdc_req *req; + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !_req) + return -EINVAL; + + ep = to_bdc_ep(_ep); + req = to_bdc_req(_req); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req); + bdc_dbg_bd_list(bdc, ep); + spin_lock_irqsave(&bdc->lock, flags); + /* make sure it's still queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->usb_req == _req) + break; + } + if (&req->usb_req != _req) { + spin_unlock_irqrestore(&bdc->lock, flags); + dev_err(bdc->dev, "usb_req !=req n"); + return -EINVAL; + } + ret = ep_dequeue(ep, req); + if (ret) { + ret = -EOPNOTSUPP; + goto err; + } + bdc_req_complete(ep, req, -ECONNRESET); + +err: + bdc_dbg_bd_list(bdc, ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_set_halt(struct usb_ep *_ep, int value) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + dev_dbg(bdc->dev, "%s ep:%s value=%d\n", __func__, ep->name, value); + spin_lock_irqsave(&bdc->lock, flags); + if (usb_endpoint_xfer_isoc(ep->usb_ep.desc)) + ret = -EINVAL; + else if (!list_empty(&ep->queue)) + ret = -EAGAIN; + else + ret = ep_set_halt(ep, value); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static struct usb_request *bdc_gadget_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct bdc_req *req; + struct bdc_ep *ep; + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + ep = to_bdc_ep(_ep); + req->ep = ep; + req->epnum = ep->ep_num; + req->usb_req.dma = DMA_ADDR_INVALID; + dev_dbg(ep->bdc->dev, "%s ep:%s req:%p\n", __func__, ep->name, req); + + return &req->usb_req; +} + +static void bdc_gadget_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct bdc_req *req; + + req = to_bdc_req(_req); + kfree(req); +} + +/* endpoint operations */ + +/* configure endpoint and also allocate resources */ +static int bdc_gadget_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) { + pr_debug("bdc_gadget_ep_enable invalid parameters\n"); + return -EINVAL; + } + + if (!desc->wMaxPacketSize) { + pr_debug("bdc_gadget_ep_enable missing wMaxPacketSize\n"); + return -EINVAL; + } + + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + + /* Sanity check, upper layer will not send enable for ep0 */ + if (ep == bdc->bdc_ep_array[1]) + return -EINVAL; + + if (!bdc->gadget_driver + || bdc->gadget.speed == USB_SPEED_UNKNOWN) { + return -ESHUTDOWN; + } + + dev_dbg(bdc->dev, "%s Enabling %s\n", __func__, ep->name); + spin_lock_irqsave(&bdc->lock, flags); + ep->desc = desc; + ep->comp_desc = _ep->comp_desc; + ret = bdc_ep_enable(ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_gadget_ep_disable(struct usb_ep *_ep) +{ + unsigned long flags; + struct bdc_ep *ep; + struct bdc *bdc; + int ret; + + if (!_ep) { + pr_debug("bdc: invalid parameters\n"); + return -EINVAL; + } + ep = to_bdc_ep(_ep); + bdc = ep->bdc; + + /* Upper layer will not call this for ep0, but do a sanity check */ + if (ep == bdc->bdc_ep_array[1]) { + dev_warn(bdc->dev, "%s called for ep0\n", __func__); + return -EINVAL; + } + dev_dbg(bdc->dev, + "%s() ep:%s ep->flags:%08x\n", + __func__, ep->name, ep->flags); + + if (!(ep->flags & BDC_EP_ENABLED)) { + dev_warn(bdc->dev, "%s is already disabled\n", ep->name); + return 0; + } + spin_lock_irqsave(&bdc->lock, flags); + ret = bdc_ep_disable(ep); + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static const struct usb_ep_ops bdc_gadget_ep_ops = { + .enable = bdc_gadget_ep_enable, + .disable = bdc_gadget_ep_disable, + .alloc_request = bdc_gadget_alloc_request, + .free_request = bdc_gadget_free_request, + .queue = bdc_gadget_ep_queue, + .dequeue = bdc_gadget_ep_dequeue, + .set_halt = bdc_gadget_ep_set_halt +}; + +/* dir = 1 is IN */ +static int init_ep(struct bdc *bdc, u32 epnum, u32 dir) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s epnum=%d dir=%d\n", __func__, epnum, dir); + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep->bdc = bdc; + ep->dir = dir; + + /* ep->ep_num is the index inside bdc_ep */ + if (epnum == 1) { + ep->ep_num = 1; + bdc->bdc_ep_array[ep->ep_num] = ep; + snprintf(ep->name, sizeof(ep->name), "ep%d", epnum - 1); + usb_ep_set_maxpacket_limit(&ep->usb_ep, EP0_MAX_PKT_SIZE); + ep->comp_desc = NULL; + bdc->gadget.ep0 = &ep->usb_ep; + } else { + if (dir) + ep->ep_num = epnum * 2 - 1; + else + ep->ep_num = epnum * 2 - 2; + + bdc->bdc_ep_array[ep->ep_num] = ep; + snprintf(ep->name, sizeof(ep->name), "ep%d%s", epnum - 1, + dir & 1 ? "in" : "out"); + + usb_ep_set_maxpacket_limit(&ep->usb_ep, 1024); + ep->usb_ep.max_streams = 0; + list_add_tail(&ep->usb_ep.ep_list, &bdc->gadget.ep_list); + } + ep->usb_ep.ops = &bdc_gadget_ep_ops; + ep->usb_ep.name = ep->name; + ep->flags = 0; + ep->ignore_next_sr = false; + dev_dbg(bdc->dev, "ep=%p ep->usb_ep.name=%s epnum=%d ep->epnum=%d\n", + ep, ep->usb_ep.name, epnum, ep->ep_num); + + INIT_LIST_HEAD(&ep->queue); + + return 0; +} + +/* Init all ep */ +int bdc_init_ep(struct bdc *bdc) +{ + u8 epnum; + int ret; + + dev_dbg(bdc->dev, "%s()\n", __func__); + INIT_LIST_HEAD(&bdc->gadget.ep_list); + /* init ep0 */ + ret = init_ep(bdc, 1, 0); + if (ret) { + dev_err(bdc->dev, "init ep ep0 fail %d\n", ret); + return ret; + } + + for (epnum = 2; epnum <= bdc->num_eps / 2; epnum++) { + /* OUT */ + ret = init_ep(bdc, epnum, 0); + if (ret) { + dev_err(bdc->dev, + "init ep failed for:%d error: %d\n", + epnum, ret); + return ret; + } + + /* IN */ + ret = init_ep(bdc, epnum, 1); + if (ret) { + dev_err(bdc->dev, + "init ep failed for:%d error: %d\n", + epnum, ret); + return ret; + } + } + + return 0; +} diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.h b/drivers/usb/gadget/udc/bdc/bdc_ep.h new file mode 100644 index 000000000..8a6b36cbf --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_ep.h @@ -0,0 +1,22 @@ +/* + * bdc_ep.h - header for the BDC debug functions + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __LINUX_BDC_EP_H__ +#define __LINUX_BDC_EP_H__ + +int bdc_init_ep(struct bdc *); +int bdc_ep_disable(struct bdc_ep *); +int bdc_ep_enable(struct bdc_ep *); +void bdc_free_ep(struct bdc *); + +#endif /* __LINUX_BDC_EP_H__ */ diff --git a/drivers/usb/gadget/udc/bdc/bdc_pci.c b/drivers/usb/gadget/udc/bdc/bdc_pci.c new file mode 100644 index 000000000..02968842b --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_pci.c @@ -0,0 +1,132 @@ +/* + * bdc_pci.c - BRCM BDC USB3.0 device controller PCI interface file. + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "bdc.h" + +#define BDC_PCI_PID 0x1570 + +struct bdc_pci { + struct device *dev; + struct platform_device *bdc; +}; + +static int bdc_setup_msi(struct pci_dev *pci) +{ + int ret; + + ret = pci_enable_msi(pci); + if (ret) { + pr_err("failed to allocate MSI entry\n"); + return ret; + } + + return ret; +} + +static int bdc_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *bdc; + struct bdc_pci *glue; + int ret = -ENOMEM; + + glue = devm_kzalloc(&pci->dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->dev = &pci->dev; + ret = pci_enable_device(pci); + if (ret) { + dev_err(&pci->dev, "failed to enable pci device\n"); + return -ENODEV; + } + pci_set_master(pci); + + bdc = platform_device_alloc(BRCM_BDC_NAME, PLATFORM_DEVID_AUTO); + if (!bdc) + return -ENOMEM; + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + bdc_setup_msi(pci); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = BRCM_BDC_NAME; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = BRCM_BDC_NAME; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(bdc, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(&pci->dev, + "couldn't add resources to bdc device\n"); + return ret; + } + + pci_set_drvdata(pci, glue); + + dma_set_coherent_mask(&bdc->dev, pci->dev.coherent_dma_mask); + + bdc->dev.dma_mask = pci->dev.dma_mask; + bdc->dev.dma_parms = pci->dev.dma_parms; + bdc->dev.parent = &pci->dev; + glue->bdc = bdc; + + ret = platform_device_add(bdc); + if (ret) { + dev_err(&pci->dev, "failed to register bdc device\n"); + platform_device_put(bdc); + return ret; + } + + return 0; +} + +static void bdc_pci_remove(struct pci_dev *pci) +{ + struct bdc_pci *glue = pci_get_drvdata(pci); + + platform_device_unregister(glue->bdc); + pci_disable_msi(pci); +} + +static struct pci_device_id bdc_pci_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, BDC_PCI_PID), }, + {} /* Terminating Entry */ +}; + +MODULE_DEVICE_TABLE(pci, bdc_pci_id_table); + +static struct pci_driver bdc_pci_driver = { + .name = "bdc-pci", + .id_table = bdc_pci_id_table, + .probe = bdc_pci_probe, + .remove = bdc_pci_remove, +}; + +MODULE_AUTHOR("Ashwini Pahuja "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("BRCM BDC USB3 PCI Glue layer"); +module_pci_driver(bdc_pci_driver); diff --git a/drivers/usb/gadget/udc/bdc/bdc_udc.c b/drivers/usb/gadget/udc/bdc/bdc_udc.c new file mode 100644 index 000000000..7f77db5d1 --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_udc.c @@ -0,0 +1,588 @@ +/* + * bdc_udc.c - BRCM BDC USB3.0 device controller gagdet ops + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + * + * Based on drivers under drivers/usb/gadget/udc/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bdc.h" +#include "bdc_ep.h" +#include "bdc_cmd.h" +#include "bdc_dbg.h" + +static const struct usb_gadget_ops bdc_gadget_ops; + +static const char * const conn_speed_str[] = { + "Not connected", + "Full Speed", + "Low Speed", + "High Speed", + "Super Speed", +}; + +/* EP0 initial descripror */ +static struct usb_endpoint_descriptor bdc_gadget_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .bEndpointAddress = 0, + .wMaxPacketSize = cpu_to_le16(EP0_MAX_PKT_SIZE), +}; + +/* Advance the srr dqp maintained by SW */ +static void srr_dqp_index_advc(struct bdc *bdc, u32 srr_num) +{ + struct srr *srr; + + srr = &bdc->srr; + dev_dbg_ratelimited(bdc->dev, "srr->dqp_index:%d\n", srr->dqp_index); + srr->dqp_index++; + /* rollback to 0 if we are past the last */ + if (srr->dqp_index == NUM_SR_ENTRIES) + srr->dqp_index = 0; +} + +/* connect sr */ +static void bdc_uspc_connected(struct bdc *bdc) +{ + u32 speed, temp; + u32 usppms; + int ret; + + temp = bdc_readl(bdc->regs, BDC_USPC); + speed = BDC_PSP(temp); + dev_dbg(bdc->dev, "%s speed=%x\n", __func__, speed); + switch (speed) { + case BDC_SPEED_SS: + bdc_gadget_ep0_desc.wMaxPacketSize = + cpu_to_le16(EP0_MAX_PKT_SIZE); + bdc->gadget.ep0->maxpacket = EP0_MAX_PKT_SIZE; + bdc->gadget.speed = USB_SPEED_SUPER; + /* Enable U1T in SS mode */ + usppms = bdc_readl(bdc->regs, BDC_USPPMS); + usppms &= ~BDC_U1T(0xff); + usppms |= BDC_U1T(U1_TIMEOUT); + usppms |= BDC_PORT_W1S; + bdc_writel(bdc->regs, BDC_USPPMS, usppms); + break; + + case BDC_SPEED_HS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + bdc->gadget.ep0->maxpacket = 64; + bdc->gadget.speed = USB_SPEED_HIGH; + break; + + case BDC_SPEED_FS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64); + bdc->gadget.ep0->maxpacket = 64; + bdc->gadget.speed = USB_SPEED_FULL; + break; + + case BDC_SPEED_LS: + bdc_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8); + bdc->gadget.ep0->maxpacket = 8; + bdc->gadget.speed = USB_SPEED_LOW; + break; + default: + dev_err(bdc->dev, "UNDEFINED SPEED\n"); + return; + } + dev_dbg(bdc->dev, "connected at %s\n", conn_speed_str[speed]); + /* Now we know the speed, configure ep0 */ + bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc; + ret = bdc_config_ep(bdc, bdc->bdc_ep_array[1]); + if (ret) + dev_err(bdc->dev, "EP0 config failed\n"); + bdc->bdc_ep_array[1]->usb_ep.desc = &bdc_gadget_ep0_desc; + bdc->bdc_ep_array[1]->flags |= BDC_EP_ENABLED; + usb_gadget_set_state(&bdc->gadget, USB_STATE_DEFAULT); +} + +/* device got disconnected */ +static void bdc_uspc_disconnected(struct bdc *bdc, bool reinit) +{ + struct bdc_ep *ep; + + dev_dbg(bdc->dev, "%s\n", __func__); + /* + * Only stop ep0 from here, rest of the endpoints will be disabled + * from gadget_disconnect + */ + ep = bdc->bdc_ep_array[1]; + if (ep && (ep->flags & BDC_EP_ENABLED)) + /* if enabled then stop and remove requests */ + bdc_ep_disable(ep); + + if (bdc->gadget_driver && bdc->gadget_driver->disconnect) { + spin_unlock(&bdc->lock); + bdc->gadget_driver->disconnect(&bdc->gadget); + spin_lock(&bdc->lock); + } + /* Set Unknown speed */ + bdc->gadget.speed = USB_SPEED_UNKNOWN; + bdc->devstatus &= DEVSTATUS_CLEAR; + bdc->delayed_status = false; + bdc->reinit = reinit; + bdc->test_mode = false; +} + +/* TNotify wkaeup timer */ +static void bdc_func_wake_timer(struct work_struct *work) +{ + struct bdc *bdc = container_of(work, struct bdc, func_wake_notify.work); + unsigned long flags; + + dev_dbg(bdc->dev, "%s\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + /* + * Check if host has started transferring on endpoints + * FUNC_WAKE_ISSUED is cleared when transfer has started after resume + */ + if (bdc->devstatus & FUNC_WAKE_ISSUED) { + dev_dbg(bdc->dev, "FUNC_WAKE_ISSUED FLAG IS STILL SET\n"); + /* flag is still set, so again send func wake */ + bdc_function_wake_fh(bdc, 0); + schedule_delayed_work(&bdc->func_wake_notify, + msecs_to_jiffies(BDC_TNOTIFY)); + } + spin_unlock_irqrestore(&bdc->lock, flags); +} + +/* handler for Link state change condition */ +static void handle_link_state_change(struct bdc *bdc, u32 uspc) +{ + u32 link_state; + + dev_dbg(bdc->dev, "Link state change"); + link_state = BDC_PST(uspc); + switch (link_state) { + case BDC_LINK_STATE_U3: + if ((bdc->gadget.speed != USB_SPEED_UNKNOWN) && + bdc->gadget_driver->suspend) { + dev_dbg(bdc->dev, "Entered Suspend mode\n"); + spin_unlock(&bdc->lock); + bdc->devstatus |= DEVICE_SUSPENDED; + bdc->gadget_driver->suspend(&bdc->gadget); + spin_lock(&bdc->lock); + } + break; + case BDC_LINK_STATE_U0: + if (bdc->devstatus & REMOTE_WAKEUP_ISSUED) { + bdc->devstatus &= ~REMOTE_WAKEUP_ISSUED; + if (bdc->gadget.speed == USB_SPEED_SUPER) { + bdc_function_wake_fh(bdc, 0); + bdc->devstatus |= FUNC_WAKE_ISSUED; + /* + * Start a Notification timer and check if the + * Host transferred anything on any of the EPs, + * if not then send function wake again every + * TNotification secs until host initiates + * transfer to BDC, USB3 spec Table 8.13 + */ + schedule_delayed_work( + &bdc->func_wake_notify, + msecs_to_jiffies(BDC_TNOTIFY)); + dev_dbg(bdc->dev, "sched func_wake_notify\n"); + } + } + break; + + case BDC_LINK_STATE_RESUME: + dev_dbg(bdc->dev, "Resumed from Suspend\n"); + if (bdc->devstatus & DEVICE_SUSPENDED) { + bdc->gadget_driver->resume(&bdc->gadget); + bdc->devstatus &= ~DEVICE_SUSPENDED; + } + break; + default: + dev_dbg(bdc->dev, "link state:%d\n", link_state); + } +} + +/* something changes on upstream port, handle it here */ +void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport) +{ + u32 clear_flags = 0; + u32 uspc; + bool connected = false; + bool disconn = false; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + dev_dbg(bdc->dev, "%s uspc=0x%08x\n", __func__, uspc); + + /* Port connect changed */ + if (uspc & BDC_PCC) { + /* Vbus not present, and not connected to Downstream port */ + if ((uspc & BDC_VBC) && !(uspc & BDC_VBS) && !(uspc & BDC_PCS)) + disconn = true; + else if ((uspc & BDC_PCS) && !BDC_PST(uspc)) + connected = true; + } + + /* Change in VBus and VBus is present */ + if ((uspc & BDC_VBC) && (uspc & BDC_VBS)) { + if (bdc->pullup) { + dev_dbg(bdc->dev, "Do a softconnect\n"); + /* Attached state, do a softconnect */ + bdc_softconn(bdc); + usb_gadget_set_state(&bdc->gadget, USB_STATE_POWERED); + } + clear_flags = BDC_VBC; + } else if ((uspc & BDC_PRS) || (uspc & BDC_PRC) || disconn) { + /* Hot reset, warm reset, 2.0 bus reset or disconn */ + dev_dbg(bdc->dev, "Port reset or disconn\n"); + bdc_uspc_disconnected(bdc, disconn); + clear_flags = BDC_PCC|BDC_PCS|BDC_PRS|BDC_PRC; + } else if ((uspc & BDC_PSC) && (uspc & BDC_PCS)) { + /* Change in Link state */ + handle_link_state_change(bdc, uspc); + clear_flags = BDC_PSC|BDC_PCS; + } + + /* + * In SS we might not have PRC bit set before connection, but in 2.0 + * the PRC bit is set before connection, so moving this condition out + * of bus reset to handle both SS/2.0 speeds. + */ + if (connected) { + /* This is the connect event for U0/L0 */ + dev_dbg(bdc->dev, "Connected\n"); + bdc_uspc_connected(bdc); + bdc->devstatus &= ~(DEVICE_SUSPENDED); + } + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= (~BDC_USPSC_RW); + dev_dbg(bdc->dev, "uspc=%x\n", uspc); + bdc_writel(bdc->regs, BDC_USPC, clear_flags); +} + +/* Main interrupt handler for bdc */ +static irqreturn_t bdc_udc_interrupt(int irq, void *_bdc) +{ + u32 eqp_index, dqp_index, sr_type, srr_int; + struct bdc_sr *sreport; + struct bdc *bdc = _bdc; + u32 status; + int ret; + + spin_lock(&bdc->lock); + status = bdc_readl(bdc->regs, BDC_BDCSC); + if (!(status & BDC_GIP)) { + spin_unlock(&bdc->lock); + return IRQ_NONE; + } + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + /* Check if the SRR IP bit it set? */ + if (!(srr_int & BDC_SRR_IP)) { + dev_warn(bdc->dev, "Global irq pending but SRR IP is 0\n"); + spin_unlock(&bdc->lock); + return IRQ_NONE; + } + eqp_index = BDC_SRR_EPI(srr_int); + dqp_index = BDC_SRR_DPI(srr_int); + dev_dbg(bdc->dev, + "%s eqp_index=%d dqp_index=%d srr.dqp_index=%d\n\n", + __func__, eqp_index, dqp_index, bdc->srr.dqp_index); + + /* check for ring empty condition */ + if (eqp_index == dqp_index) { + dev_dbg(bdc->dev, "SRR empty?\n"); + spin_unlock(&bdc->lock); + return IRQ_HANDLED; + } + + while (bdc->srr.dqp_index != eqp_index) { + sreport = &bdc->srr.sr_bds[bdc->srr.dqp_index]; + /* sreport is read before using it */ + rmb(); + sr_type = le32_to_cpu(sreport->offset[3]) & BD_TYPE_BITMASK; + dev_dbg_ratelimited(bdc->dev, "sr_type=%d\n", sr_type); + switch (sr_type) { + case SR_XSF: + bdc->sr_handler[0](bdc, sreport); + break; + + case SR_USPC: + bdc->sr_handler[1](bdc, sreport); + break; + default: + dev_warn(bdc->dev, "SR:%d not handled\n", sr_type); + } + /* Advance the srr dqp index */ + srr_dqp_index_advc(bdc, 0); + } + /* update the hw dequeue pointer */ + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + srr_int &= ~BDC_SRR_DPI_MASK; + srr_int &= ~(BDC_SRR_RWS|BDC_SRR_RST|BDC_SRR_ISR); + srr_int |= ((bdc->srr.dqp_index) << 16); + srr_int |= BDC_SRR_IP; + bdc_writel(bdc->regs, BDC_SRRINT(0), srr_int); + srr_int = bdc_readl(bdc->regs, BDC_SRRINT(0)); + if (bdc->reinit) { + ret = bdc_reinit(bdc); + if (ret) + dev_err(bdc->dev, "err in bdc reinit\n"); + } + + spin_unlock(&bdc->lock); + + return IRQ_HANDLED; +} + +/* Gadget ops */ +static int bdc_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + int ret = 0; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + if (bdc->gadget_driver) { + dev_err(bdc->dev, "%s is already bound to %s\n", + bdc->gadget.name, + bdc->gadget_driver->driver.name); + ret = -EBUSY; + goto err; + } + /* + * Run the controller from here and when BDC is connected to + * Host then driver will receive a USPC SR with VBUS present + * and then driver will do a softconnect. + */ + ret = bdc_run(bdc); + if (ret) { + dev_err(bdc->dev, "%s bdc run fail\n", __func__); + goto err; + } + bdc->gadget_driver = driver; + bdc->gadget.dev.driver = &driver->driver; +err: + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static int bdc_udc_stop(struct usb_gadget *gadget) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + spin_lock_irqsave(&bdc->lock, flags); + bdc_stop(bdc); + bdc->gadget_driver = NULL; + bdc->gadget.dev.driver = NULL; + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_pullup(struct usb_gadget *gadget, int is_on) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + u32 uspc; + + dev_dbg(bdc->dev, "%s() is_on:%d\n", __func__, is_on); + if (!gadget) + return -EINVAL; + + spin_lock_irqsave(&bdc->lock, flags); + if (!is_on) { + bdc_softdisconn(bdc); + bdc->pullup = false; + } else { + /* + * For a self powered device, we need to wait till we receive + * a VBUS change and Vbus present event, then if pullup flag + * is set, then only we present the Termintation. + */ + bdc->pullup = true; + /* + * Check if BDC is already connected to Host i.e Vbus=1, + * if yes, then present TERM now, this is typical for bus + * powered devices. + */ + uspc = bdc_readl(bdc->regs, BDC_USPC); + if (uspc & BDC_VBS) + bdc_softconn(bdc); + } + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_set_selfpowered(struct usb_gadget *gadget, + int is_self) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + + dev_dbg(bdc->dev, "%s()\n", __func__); + gadget->is_selfpowered = (is_self != 0); + spin_lock_irqsave(&bdc->lock, flags); + if (!is_self) + bdc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + bdc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + + spin_unlock_irqrestore(&bdc->lock, flags); + + return 0; +} + +static int bdc_udc_wakeup(struct usb_gadget *gadget) +{ + struct bdc *bdc = gadget_to_bdc(gadget); + unsigned long flags; + u8 link_state; + u32 uspc; + int ret = 0; + + dev_dbg(bdc->dev, + "%s() bdc->devstatus=%08x\n", + __func__, bdc->devstatus); + + if (!(bdc->devstatus & REMOTE_WAKE_ENABLE)) + return -EOPNOTSUPP; + + spin_lock_irqsave(&bdc->lock, flags); + uspc = bdc_readl(bdc->regs, BDC_USPC); + link_state = BDC_PST(uspc); + dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc); + if (link_state != BDC_LINK_STATE_U3) { + dev_warn(bdc->dev, + "can't wakeup from link state %d\n", + link_state); + ret = -EINVAL; + goto out; + } + if (bdc->gadget.speed == USB_SPEED_SUPER) + bdc->devstatus |= REMOTE_WAKEUP_ISSUED; + + uspc &= ~BDC_PST_MASK; + uspc &= (~BDC_USPSC_RW); + uspc |= BDC_PST(BDC_LINK_STATE_U0); + uspc |= BDC_SWS; + bdc_writel(bdc->regs, BDC_USPC, uspc); + uspc = bdc_readl(bdc->regs, BDC_USPC); + link_state = BDC_PST(uspc); + dev_dbg(bdc->dev, "link_state =%d portsc=%x", link_state, uspc); +out: + spin_unlock_irqrestore(&bdc->lock, flags); + + return ret; +} + +static const struct usb_gadget_ops bdc_gadget_ops = { + .wakeup = bdc_udc_wakeup, + .set_selfpowered = bdc_udc_set_selfpowered, + .pullup = bdc_udc_pullup, + .udc_start = bdc_udc_start, + .udc_stop = bdc_udc_stop, +}; + +/* Init the gadget interface and register the udc */ +int bdc_udc_init(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s()\n", __func__); + bdc->gadget.ops = &bdc_gadget_ops; + bdc->gadget.max_speed = USB_SPEED_SUPER; + bdc->gadget.speed = USB_SPEED_UNKNOWN; + bdc->gadget.dev.parent = bdc->dev; + + bdc->gadget.sg_supported = false; + + + bdc->gadget.name = BRCM_BDC_NAME; + ret = devm_request_irq(bdc->dev, bdc->irq, bdc_udc_interrupt, + IRQF_SHARED , BRCM_BDC_NAME, bdc); + if (ret) { + dev_err(bdc->dev, + "failed to request irq #%d %d\n", + bdc->irq, ret); + return ret; + } + + ret = bdc_init_ep(bdc); + if (ret) { + dev_err(bdc->dev, "bdc init ep fail: %d\n", ret); + return ret; + } + + ret = usb_add_gadget_udc(bdc->dev, &bdc->gadget); + if (ret) { + dev_err(bdc->dev, "failed to register udc\n"); + goto err0; + } + usb_gadget_set_state(&bdc->gadget, USB_STATE_NOTATTACHED); + bdc->bdc_ep_array[1]->desc = &bdc_gadget_ep0_desc; + /* + * Allocate bd list for ep0 only, ep0 will be enabled on connect + * status report when the speed is known + */ + ret = bdc_ep_enable(bdc->bdc_ep_array[1]); + if (ret) { + dev_err(bdc->dev, "fail to enable %s\n", + bdc->bdc_ep_array[1]->name); + goto err1; + } + INIT_DELAYED_WORK(&bdc->func_wake_notify, bdc_func_wake_timer); + /* Enable Interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + return 0; +err1: + usb_del_gadget_udc(&bdc->gadget); +err0: + bdc_free_ep(bdc); + + return ret; +} + +void bdc_udc_exit(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s()\n", __func__); + bdc_ep_disable(bdc->bdc_ep_array[1]); + usb_del_gadget_udc(&bdc->gadget); + bdc_free_ep(bdc); +} -- cgit v1.2.3-54-g00ecf