From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/usb/host/ehci-fsl.c | 714 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 714 insertions(+) create mode 100644 drivers/usb/host/ehci-fsl.c (limited to 'drivers/usb/host/ehci-fsl.c') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c new file mode 100644 index 000000000..ab4eee3df --- /dev/null +++ b/drivers/usb/host/ehci-fsl.c @@ -0,0 +1,714 @@ +/* + * Copyright 2005-2009 MontaVista Software, Inc. + * Copyright 2008,2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Ported to 834x by Randy Vinson using code provided + * by Hunter Wu. + * Power Management support by Dave Liu , + * Jerry Huang and + * Anton Vorontsov . + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "ehci-fsl.h" + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + +/** + * usb_hcd_fsl_probe - initialize FSL-based HCDs + * @drvier: Driver to be used for this HCD + * @pdev: USB Host Controller being probed + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller. + * + */ +static int usb_hcd_fsl_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata; + struct usb_hcd *hcd; + struct resource *res; + int irq; + int retval; + + pr_debug("initializing FSL-SOC USB Controller\n"); + + /* Need platform data for setup */ + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, + "No platform data for %s.\n", dev_name(&pdev->dev)); + return -ENODEV; + } + + /* + * This is a host mode driver, verify that we're supposed to be + * in host mode. + */ + if (!((pdata->operating_mode == FSL_USB2_DR_HOST) || + (pdata->operating_mode == FSL_USB2_MPH_HOST) || + (pdata->operating_mode == FSL_USB2_DR_OTG))) { + dev_err(&pdev->dev, + "Non Host Mode configured for %s. Wrong driver linked.\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + return -ENODEV; + } + irq = res->start; + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); + goto err2; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + pdata->regs = hcd->regs; + + if (pdata->power_budget) + hcd->power_budget = pdata->power_budget; + + /* + * do platform specific init: check the clock, grab/config pins, etc. + */ + if (pdata->init && pdata->init(pdev)) { + retval = -ENODEV; + goto err2; + } + + /* Enable USB controller, 83xx or 8536 */ + if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) + setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); + + /* Don't need to set host mode here. It will be done by tdi_reset() */ + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval != 0) + goto err2; + device_wakeup_enable(hcd->self.controller); + +#ifdef CONFIG_USB_OTG + if (pdata->operating_mode == FSL_USB2_DR_OTG) { + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); + dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", + hcd, ehci, hcd->usb_phy); + + if (!IS_ERR_OR_NULL(hcd->usb_phy)) { + retval = otg_set_host(hcd->usb_phy->otg, + &ehci_to_hcd(ehci)->self); + if (retval) { + usb_put_phy(hcd->usb_phy); + goto err2; + } + } else { + dev_err(&pdev->dev, "can't find phy\n"); + retval = -ENODEV; + goto err2; + } + } +#endif + return retval; + + err2: + usb_put_hcd(hcd); + err1: + dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval); + if (pdata->exit) + pdata->exit(pdev); + return retval; +} + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/** + * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_fsl_probe(). + * + */ +static void usb_hcd_fsl_remove(struct usb_hcd *hcd, + struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); + + if (!IS_ERR_OR_NULL(hcd->usb_phy)) { + otg_set_host(hcd->usb_phy->otg, NULL); + usb_put_phy(hcd->usb_phy); + } + + usb_remove_hcd(hcd); + + /* + * do platform specific un-initialization: + * release iomux pins, disable clock, etc. + */ + if (pdata->exit) + pdata->exit(pdev); + usb_put_hcd(hcd); +} + +static int ehci_fsl_setup_phy(struct usb_hcd *hcd, + enum fsl_usb2_phy_modes phy_mode, + unsigned int port_offset) +{ + u32 portsc; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + void __iomem *non_ehci = hcd->regs; + struct device *dev = hcd->self.controller; + struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); + + if (pdata->controller_ver < 0) { + dev_warn(hcd->self.controller, "Could not get controller version\n"); + return -ENODEV; + } + + portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); + portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); + + switch (phy_mode) { + case FSL_USB2_PHY_ULPI: + if (pdata->have_sysif_regs && pdata->controller_ver) { + /* controller version 1.6 or above */ + clrbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); + setbits32(non_ehci + FSL_SOC_USB_CTRL, + ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); + } + portsc |= PORT_PTS_ULPI; + break; + case FSL_USB2_PHY_SERIAL: + portsc |= PORT_PTS_SERIAL; + break; + case FSL_USB2_PHY_UTMI_WIDE: + portsc |= PORT_PTS_PTW; + /* fall through */ + case FSL_USB2_PHY_UTMI: + if (pdata->have_sysif_regs && pdata->controller_ver) { + /* controller version 1.6 or above */ + setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to + become stable - 10ms*/ + } + /* enable UTMI PHY */ + if (pdata->have_sysif_regs) + setbits32(non_ehci + FSL_SOC_USB_CTRL, + CTRL_UTMI_PHY_EN); + portsc |= PORT_PTS_UTMI; + break; + case FSL_USB2_PHY_NONE: + break; + } + + if (pdata->have_sysif_regs && + pdata->controller_ver > FSL_USB_VER_1_6 && + (phy_mode == FSL_USB2_PHY_ULPI)) { + /* check PHY_CLK_VALID to get phy clk valid */ + if (!(spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) & + PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0) || + in_be32(non_ehci + FSL_SOC_USB_PRICTRL))) { + dev_warn(hcd->self.controller, "USB PHY clock invalid\n"); + return -EINVAL; + } + } + + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); + + if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) + setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN); + + return 0; +} + +static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) +{ + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct fsl_usb2_platform_data *pdata; + void __iomem *non_ehci = hcd->regs; + + pdata = dev_get_platdata(hcd->self.controller); + + if (pdata->have_sysif_regs) { + /* + * Turn on cache snooping hardware, since some PowerPC platforms + * wholly rely on hardware to deal with cache coherent + */ + + /* Setup Snooping for all the 4GB space */ + /* SNOOP1 starts from 0x0, size 2G */ + out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); + /* SNOOP2 starts from 0x80000000, size 2G */ + out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); + } + + if ((pdata->operating_mode == FSL_USB2_DR_HOST) || + (pdata->operating_mode == FSL_USB2_DR_OTG)) + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + + if (pdata->operating_mode == FSL_USB2_MPH_HOST) { + unsigned int chip, rev, svr; + + svr = mfspr(SPRN_SVR); + chip = svr >> 16; + rev = (svr >> 4) & 0xf; + + /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ + if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) + ehci->has_fsl_port_bug = 1; + + if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0)) + return -EINVAL; + + if (pdata->port_enables & FSL_USB2_PORT1_ENABLED) + if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1)) + return -EINVAL; + } + + if (pdata->have_sysif_regs) { +#ifdef CONFIG_FSL_SOC_BOOKE + out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008); + out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080); +#else + out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c); + out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040); +#endif + out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001); + } + + return 0; +} + +/* called after powerup, by probe or system-pm "wakeup" */ +static int ehci_fsl_reinit(struct ehci_hcd *ehci) +{ + if (ehci_fsl_usb_setup(ehci)) + return -EINVAL; + + return 0; +} + +/* called during probe() after chip reset completes */ +static int ehci_fsl_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + struct fsl_usb2_platform_data *pdata; + struct device *dev; + + dev = hcd->self.controller; + pdata = dev_get_platdata(hcd->self.controller); + ehci->big_endian_desc = pdata->big_endian_desc; + ehci->big_endian_mmio = pdata->big_endian_mmio; + + /* EHCI registers start at offset 0x100 */ + ehci->caps = hcd->regs + 0x100; + +#ifdef CONFIG_PPC_83xx + /* + * Deal with MPC834X that need port power to be cycled after the power + * fault condition is removed. Otherwise the state machine does not + * reflect PORTSC[CSC] correctly. + */ + ehci->need_oc_pp_cycle = 1; +#endif + + hcd->has_tt = 1; + + retval = ehci_setup(hcd); + if (retval) + return retval; + + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + /* + * set SBUSCFG:AHBBRST so that control msgs don't + * fail when doing heavy PATA writes. + */ + ehci_writel(ehci, SBUSCFG_INCR8, + hcd->regs + FSL_SOC_USB_SBUSCFG); + } + + retval = ehci_fsl_reinit(ehci); + return retval; +} + +struct ehci_fsl { + struct ehci_hcd ehci; + +#ifdef CONFIG_PM + /* Saved USB PHY settings, need to restore after deep sleep. */ + u32 usb_ctrl; +#endif +}; + +#ifdef CONFIG_PM + +#ifdef CONFIG_PPC_MPC512x +static int ehci_fsl_mpc512x_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); + u32 tmp; + +#ifdef CONFIG_DYNAMIC_DEBUG + u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE); + mode &= USBMODE_CM_MASK; + tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */ + + dev_dbg(dev, "suspend=%d already_suspended=%d " + "mode=%d usbcmd %08x\n", pdata->suspended, + pdata->already_suspended, mode, tmp); +#endif + + /* + * If the controller is already suspended, then this must be a + * PM suspend. Remember this fact, so that we will leave the + * controller suspended at PM resume time. + */ + if (pdata->suspended) { + dev_dbg(dev, "already suspended, leaving early\n"); + pdata->already_suspended = 1; + return 0; + } + + dev_dbg(dev, "suspending...\n"); + + ehci->rh_state = EHCI_RH_SUSPENDED; + dev->power.power_state = PMSG_SUSPEND; + + /* ignore non-host interrupts */ + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* stop the controller */ + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp &= ~CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + + /* save EHCI registers */ + pdata->pm_command = ehci_readl(ehci, &ehci->regs->command); + pdata->pm_command &= ~CMD_RUN; + pdata->pm_status = ehci_readl(ehci, &ehci->regs->status); + pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable); + pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index); + pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment); + pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list); + pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next); + pdata->pm_configured_flag = + ehci_readl(ehci, &ehci->regs->configured_flag); + pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]); + pdata->pm_usbgenctrl = ehci_readl(ehci, + hcd->regs + FSL_SOC_USB_USBGENCTRL); + + /* clear the W1C bits */ + pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS); + + pdata->suspended = 1; + + /* clear PP to cut power to the port */ + tmp = ehci_readl(ehci, &ehci->regs->port_status[0]); + tmp &= ~PORT_POWER; + ehci_writel(ehci, tmp, &ehci->regs->port_status[0]); + + return 0; +} + +static int ehci_fsl_mpc512x_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev); + u32 tmp; + + dev_dbg(dev, "suspend=%d already_suspended=%d\n", + pdata->suspended, pdata->already_suspended); + + /* + * If the controller was already suspended at suspend time, + * then don't resume it now. + */ + if (pdata->already_suspended) { + dev_dbg(dev, "already suspended, leaving early\n"); + pdata->already_suspended = 0; + return 0; + } + + if (!pdata->suspended) { + dev_dbg(dev, "not suspended, leaving early\n"); + return 0; + } + + pdata->suspended = 0; + + dev_dbg(dev, "resuming...\n"); + + /* set host mode */ + tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0); + ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE); + + ehci_writel(ehci, pdata->pm_usbgenctrl, + hcd->regs + FSL_SOC_USB_USBGENCTRL); + ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE, + hcd->regs + FSL_SOC_USB_ISIPHYCTRL); + + ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG); + + /* restore EHCI registers */ + ehci_writel(ehci, pdata->pm_command, &ehci->regs->command); + ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable); + ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index); + ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment); + ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list); + ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next); + ehci_writel(ehci, pdata->pm_configured_flag, + &ehci->regs->configured_flag); + ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]); + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + ehci->rh_state = EHCI_RH_RUNNING; + dev->power.power_state = PMSG_ON; + + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp |= CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + + usb_hcd_resume_root_hub(hcd); + + return 0; +} +#else +static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev) +{ + return 0; +} + +static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev) +{ + return 0; +} +#endif /* CONFIG_PPC_MPC512x */ + +static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + return container_of(ehci, struct ehci_fsl, ehci); +} + +static int ehci_fsl_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + void __iomem *non_ehci = hcd->regs; + + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + return ehci_fsl_mpc512x_drv_suspend(dev); + } + + ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), + device_may_wakeup(dev)); + if (!fsl_deep_sleep()) + return 0; + + ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL); + return 0; +} + +static int ehci_fsl_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + void __iomem *non_ehci = hcd->regs; + + if (of_device_is_compatible(dev->parent->of_node, + "fsl,mpc5121-usb2-dr")) { + return ehci_fsl_mpc512x_drv_resume(dev); + } + + ehci_prepare_ports_for_controller_resume(ehci); + if (!fsl_deep_sleep()) + return 0; + + usb_root_hub_lost_power(hcd->self.root_hub); + + /* Restore USB PHY settings and enable the controller. */ + out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl); + + ehci_reset(ehci); + ehci_fsl_reinit(ehci); + + return 0; +} + +static int ehci_fsl_drv_restore(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_root_hub_lost_power(hcd->self.root_hub); + return 0; +} + +static struct dev_pm_ops ehci_fsl_pm_ops = { + .suspend = ehci_fsl_drv_suspend, + .resume = ehci_fsl_drv_resume, + .restore = ehci_fsl_drv_restore, +}; + +#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops) +#else +#define EHCI_FSL_PM_OPS NULL +#endif /* CONFIG_PM */ + +#ifdef CONFIG_USB_OTG +static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 status; + + if (!port) + return -EINVAL; + + port--; + + /* start port reset before HNP protocol time out */ + status = readl(&ehci->regs->port_status[port]); + if (!(status & PORT_CONNECT)) + return -ENODEV; + + /* hub_wq will finish the reset later */ + if (ehci_is_TDI(ehci)) { + writel(PORT_RESET | + (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)), + &ehci->regs->port_status[port]); + } else { + writel(PORT_RESET, &ehci->regs->port_status[port]); + } + + return 0; +} +#else +#define ehci_start_port_reset NULL +#endif /* CONFIG_USB_OTG */ + + +static const struct hc_driver ehci_fsl_hc_driver = { + .description = hcd_name, + .product_desc = "Freescale On-Chip EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_fsl), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_USB2 | HCD_MEMORY | HCD_BH, + + /* + * basic lifecycle operations + */ + .reset = ehci_fsl_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .start_port_reset = ehci_start_port_reset, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_fsl_drv_probe(struct platform_device *pdev) +{ + if (usb_disabled()) + return -ENODEV; + + /* FIXME we only want one one probe() not two */ + return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev); +} + +static int ehci_fsl_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + /* FIXME we only want one one remove() not two */ + usb_hcd_fsl_remove(hcd, pdev); + return 0; +} + +MODULE_ALIAS("platform:fsl-ehci"); + +static struct platform_driver ehci_fsl_driver = { + .probe = ehci_fsl_drv_probe, + .remove = ehci_fsl_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "fsl-ehci", + .pm = EHCI_FSL_PM_OPS, + }, +}; -- cgit v1.2.3-54-g00ecf