From 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Tue, 15 Dec 2015 14:52:16 -0300 Subject: Linux-libre 4.3.2-gnu --- drivers/usb/phy/phy-msm-usb.c | 67 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 57 insertions(+), 10 deletions(-) (limited to 'drivers/usb/phy/phy-msm-usb.c') diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 00c49bb1b..c58c3c0db 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -32,6 +33,7 @@ #include #include #include +#include #include #include @@ -1471,6 +1473,14 @@ static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event, else clear_bit(B_SESS_VLD, &motg->inputs); + if (test_bit(B_SESS_VLD, &motg->inputs)) { + /* Switch D+/D- lines to Device connector */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + } else { + /* Switch D+/D- lines to Hub */ + gpiod_set_value_cansleep(motg->switch_gpio, 1); + } + schedule_work(&motg->sm_work); return NOTIFY_DONE; @@ -1546,6 +1556,11 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + motg->switch_gpio = devm_gpiod_get_optional(&pdev->dev, "switch", + GPIOD_OUT_LOW); + if (IS_ERR(motg->switch_gpio)) + return PTR_ERR(motg->switch_gpio); + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(node, "extcon")) { @@ -1561,15 +1576,16 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) } if (!IS_ERR(ext_vbus)) { + motg->vbus.extcon = ext_vbus; motg->vbus.nb.notifier_call = msm_otg_vbus_notifier; - ret = extcon_register_interest(&motg->vbus.conn, ext_vbus->name, - "USB", &motg->vbus.nb); + ret = extcon_register_notifier(ext_vbus, EXTCON_USB, + &motg->vbus.nb); if (ret < 0) { dev_err(&pdev->dev, "register VBUS notifier failed\n"); return ret; } - ret = extcon_get_cable_state(ext_vbus, "USB"); + ret = extcon_get_cable_state_(ext_vbus, EXTCON_USB); if (ret) set_bit(B_SESS_VLD, &motg->inputs); else @@ -1577,15 +1593,16 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) } if (!IS_ERR(ext_id)) { + motg->id.extcon = ext_id; motg->id.nb.notifier_call = msm_otg_id_notifier; - ret = extcon_register_interest(&motg->id.conn, ext_id->name, - "USB-HOST", &motg->id.nb); + ret = extcon_register_notifier(ext_id, EXTCON_USB_HOST, + &motg->id.nb); if (ret < 0) { dev_err(&pdev->dev, "register ID notifier failed\n"); return ret; } - ret = extcon_get_cable_state(ext_id, "USB-HOST"); + ret = extcon_get_cable_state_(ext_id, EXTCON_USB_HOST); if (ret) clear_bit(ID, &motg->inputs); else @@ -1615,6 +1632,19 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) return 0; } +static int msm_otg_reboot_notify(struct notifier_block *this, + unsigned long code, void *unused) +{ + struct msm_otg *motg = container_of(this, struct msm_otg, reboot); + + /* + * Ensure that D+/D- lines are routed to uB connector, so + * we could load bootloader/kernel at next reboot + */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + return NOTIFY_DONE; +} + static int msm_otg_probe(struct platform_device *pdev) { struct regulator_bulk_data regs[3]; @@ -1779,6 +1809,17 @@ static int msm_otg_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "Can not create mode change file\n"); } + if (test_bit(B_SESS_VLD, &motg->inputs)) { + /* Switch D+/D- lines to Device connector */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + } else { + /* Switch D+/D- lines to Hub */ + gpiod_set_value_cansleep(motg->switch_gpio, 1); + } + + motg->reboot.notifier_call = msm_otg_reboot_notify; + register_reboot_notifier(&motg->reboot); + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -1805,10 +1846,16 @@ static int msm_otg_remove(struct platform_device *pdev) if (phy->otg->host || phy->otg->gadget) return -EBUSY; - if (motg->id.conn.edev) - extcon_unregister_interest(&motg->id.conn); - if (motg->vbus.conn.edev) - extcon_unregister_interest(&motg->vbus.conn); + unregister_reboot_notifier(&motg->reboot); + + /* + * Ensure that D+/D- lines are routed to uB connector, so + * we could load bootloader/kernel at next reboot + */ + gpiod_set_value_cansleep(motg->switch_gpio, 0); + + extcon_unregister_notifier(motg->id.extcon, EXTCON_USB_HOST, &motg->id.nb); + extcon_unregister_notifier(motg->vbus.extcon, EXTCON_USB, &motg->vbus.nb); msm_otg_debugfs_cleanup(); cancel_delayed_work_sync(&motg->chg_work); -- cgit v1.2.3-54-g00ecf