From b4b7ff4b08e691656c9d77c758fc355833128ac0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 20 Jan 2016 14:01:31 -0300 Subject: Linux-libre 4.4-gnu --- drivers/usb/serial/io_ti.c | 530 +++++++++++++++++++++++++-------------------- 1 file changed, 299 insertions(+), 231 deletions(-) (limited to 'drivers/usb/serial/io_ti.c') diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 5f071ea2a..f0017b2da 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -54,8 +54,10 @@ #define TI_MODE_CONFIGURING 0 /* Device has not entered start device */ #define TI_MODE_BOOT 1 /* Staying in boot mode */ #define TI_MODE_DOWNLOAD 2 /* Made it to download mode */ -#define TI_MODE_TRANSITIONING 3 /* Currently in boot mode but - transitioning to download mode */ +#define TI_MODE_TRANSITIONING 3 /* + * Currently in boot mode but + * transitioning to download mode + */ /* read urb state */ #define EDGE_READ_URB_RUNNING 0 @@ -97,9 +99,11 @@ struct edgeport_port { __u8 shadow_mcr; __u8 shadow_lsr; __u8 lsr_mask; - __u32 ump_read_timeout; /* Number of milliseconds the UMP will - wait without data before completing - a read short */ + __u32 ump_read_timeout; /* + * Number of milliseconds the UMP will + * wait without data before completing + * a read short + */ int baud_rate; int close_pending; int lsr_event; @@ -115,8 +119,10 @@ struct edgeport_port { struct edgeport_serial { struct product_info product_info; u8 TI_I2C_Type; /* Type of I2C in UMP */ - u8 TiReadI2C; /* Set to TRUE if we have read the - I2c in Boot Mode */ + u8 TiReadI2C; /* + * Set to TRUE if we have read the + * I2c in Boot Mode + */ struct mutex es_lock; int num_ports_open; struct usb_serial *serial; @@ -223,6 +229,11 @@ static void edge_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios); static void edge_send(struct usb_serial_port *port, struct tty_struct *tty); +static int do_download_mode(struct edgeport_serial *serial, + const struct firmware *fw); +static int do_boot_mode(struct edgeport_serial *serial, + const struct firmware *fw); + /* sysfs attributes */ static int edge_create_sysfs_attrs(struct usb_serial_port *port); static int edge_remove_sysfs_attrs(struct usb_serial_port *port); @@ -324,7 +335,8 @@ static int read_download_mem(struct usb_device *dev, int start_address, dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); - /* Read in blocks of 64 bytes + /* + * Read in blocks of 64 bytes * (TI firmware can't handle more than 64 byte reads) */ while (length) { @@ -430,7 +442,6 @@ static int write_boot_mem(struct edgeport_serial *serial, return status; } - /* Write edgeport I2C memory to TI chip */ static int write_i2c_mem(struct edgeport_serial *serial, int start_address, int length, __u8 address_type, __u8 *buffer) @@ -472,8 +483,10 @@ static int write_i2c_mem(struct edgeport_serial *serial, start_address += write_length; buffer += write_length; - /* We should be aligned now -- can write - max page size bytes at a time */ + /* + * We should be aligned now -- can write max page size bytes at a + * time. + */ while (length) { if (length > EPROM_PAGE_SIZE) write_length = EPROM_PAGE_SIZE; @@ -506,7 +519,8 @@ static int write_i2c_mem(struct edgeport_serial *serial, return status; } -/* Examine the UMP DMA registers and LSR +/* + * Examine the UMP DMA registers and LSR * * Check the MSBit of the X and Y DMA byte count registers. * A zero in this bit indicates that the TX DMA buffers are empty @@ -523,9 +537,11 @@ static int tx_active(struct edgeport_port *port) if (!oedb) return -ENOMEM; - lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte, - as not all platforms can do DMA - from stack */ + /* + * Sigh, that's right, just one byte, as not all platforms can + * do DMA from stack + */ + lsr = kmalloc(1, GFP_KERNEL); if (!lsr) { kfree(oedb); return -ENOMEM; @@ -615,8 +631,6 @@ static int write_rom(struct edgeport_serial *serial, int start_address, return -EINVAL; } - - /* Read a descriptor header from I2C based on type */ static int get_descriptor_addr(struct edgeport_serial *serial, int desc_type, struct ti_i2c_desc *rom_desc) @@ -785,8 +799,7 @@ exit: } /* Build firmware header used for firmware update */ -static int build_i2c_fw_hdr(u8 *header, struct device *dev, - const struct firmware *fw) +static int build_i2c_fw_hdr(u8 *header, const struct firmware *fw) { __u8 *buffer; int buffer_size; @@ -797,7 +810,8 @@ static int build_i2c_fw_hdr(u8 *header, struct device *dev, struct ti_i2c_firmware_rec *firmware_rec; struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data; - /* In order to update the I2C firmware we must change the type 2 record + /* + * In order to update the I2C firmware we must change the type 2 record * to type 0xF2. This will force the UMP to come up in Boot Mode. * Then while in boot mode, the driver will download the latest * firmware (padded to 15.5k) into the UMP ram. And finally when the @@ -806,8 +820,10 @@ static int build_i2c_fw_hdr(u8 *header, struct device *dev, * update the record type from 0xf2 to 0x02. */ - /* Allocate a 15.5k buffer + 2 bytes for version number - * (Firmware Record) */ + /* + * Allocate a 15.5k buffer + 2 bytes for version number (Firmware + * Record) + */ buffer_size = (((1024 * 16) - 512 ) + sizeof(struct ti_i2c_firmware_rec)); @@ -815,7 +831,7 @@ static int build_i2c_fw_hdr(u8 *header, struct device *dev, if (!buffer) return -ENOMEM; - // Set entire image of 0xffs + /* Set entire image of 0xffs */ memset(buffer, 0xff, buffer_size); /* Copy version number into firmware record */ @@ -981,32 +997,41 @@ static int check_fw_sanity(struct edgeport_serial *serial, return 0; } -/** +/* * DownloadTIFirmware - Download run-time operating firmware to the TI5052 * * This routine downloads the main operating code into the TI5052, using the * boot code already burned into E2PROM or ROM. */ -static int download_fw(struct edgeport_serial *serial, - const struct firmware *fw) +static int download_fw(struct edgeport_serial *serial) { - struct device *dev = &serial->serial->dev->dev; + struct device *dev = &serial->serial->interface->dev; int status = 0; - int start_address; - struct edge_ti_manuf_descriptor *ti_manuf_desc; struct usb_interface_descriptor *interface; - int download_cur_ver; - int download_new_ver; - struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data; + const struct firmware *fw; + const char *fw_name = "/*(DEBLOBBED)*/"; + struct edgeport_fw_hdr *fw_hdr; - if (check_fw_sanity(serial, fw)) - return -EINVAL; + status = reject_firmware(&fw, fw_name, dev); + if (status) { + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, status); + return status; + } + + if (check_fw_sanity(serial, fw)) { + status = -EINVAL; + goto out; + } - /* If on-board version is newer, "fw_version" will be updated below. */ + fw_hdr = (struct edgeport_fw_hdr *)fw->data; + + /* If on-board version is newer, "fw_version" will be updated later. */ serial->fw_version = (fw_hdr->major_version << 8) + fw_hdr->minor_version; - /* This routine is entered by both the BOOT mode and the Download mode + /* + * This routine is entered by both the BOOT mode and the Download mode * We can determine which code is running by the reading the config * descriptor and if we have only one bulk pipe it is in boot mode */ @@ -1017,12 +1042,13 @@ static int download_fw(struct edgeport_serial *serial, status = choose_config(serial->serial->dev); if (status) - return status; + goto out; interface = &serial->serial->interface->cur_altsetting->desc; if (!interface) { dev_err(dev, "%s - no interface set, error!\n", __func__); - return -ENODEV; + status = -ENODEV; + goto out; } /* @@ -1030,190 +1056,219 @@ static int download_fw(struct edgeport_serial *serial, * if we have more than one endpoint we are definitely in download * mode */ - if (interface->bNumEndpoints > 1) + if (interface->bNumEndpoints > 1) { serial->product_info.TiMode = TI_MODE_DOWNLOAD; - else + status = do_download_mode(serial, fw); + } else { /* Otherwise we will remain in configuring mode */ serial->product_info.TiMode = TI_MODE_CONFIGURING; + status = do_boot_mode(serial, fw); + } - /********************************************************************/ - /* Download Mode */ - /********************************************************************/ - if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { - struct ti_i2c_desc *rom_desc; +out: + release_firmware(fw); + return status; +} - dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); +static int do_download_mode(struct edgeport_serial *serial, + const struct firmware *fw) +{ + struct device *dev = &serial->serial->interface->dev; + int status = 0; + int start_address; + struct edge_ti_manuf_descriptor *ti_manuf_desc; + int download_cur_ver; + int download_new_ver; + struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data; + struct ti_i2c_desc *rom_desc; - status = check_i2c_image(serial); - if (status) { - dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); - return status; - } + dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); - /* Validate Hardware version number - * Read Manufacturing Descriptor from TI Based Edgeport - */ - ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); - if (!ti_manuf_desc) + status = check_i2c_image(serial); + if (status) { + dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); + return status; + } + + /* + * Validate Hardware version number + * Read Manufacturing Descriptor from TI Based Edgeport + */ + ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); + if (!ti_manuf_desc) + return -ENOMEM; + + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); + if (status) { + kfree(ti_manuf_desc); + return status; + } + + /* Check version number of ION descriptor */ + if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", + __func__, ti_cpu_rev(ti_manuf_desc)); + kfree(ti_manuf_desc); + return -EINVAL; + } + + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); + if (!rom_desc) { + kfree(ti_manuf_desc); + return -ENOMEM; + } + + /* Search for type 2 record (firmware record) */ + start_address = get_descriptor_addr(serial, + I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc); + if (start_address != 0) { + struct ti_i2c_firmware_rec *firmware_version; + u8 *record; + + dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", + __func__); + + firmware_version = kmalloc(sizeof(*firmware_version), + GFP_KERNEL); + if (!firmware_version) { + kfree(rom_desc); + kfree(ti_manuf_desc); return -ENOMEM; + } - status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); + /* + * Validate version number + * Read the descriptor data + */ + status = read_rom(serial, start_address + + sizeof(struct ti_i2c_desc), + sizeof(struct ti_i2c_firmware_rec), + (__u8 *)firmware_version); if (status) { + kfree(firmware_version); + kfree(rom_desc); kfree(ti_manuf_desc); return status; } - /* Check version number of ION descriptor */ - if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", - __func__, ti_cpu_rev(ti_manuf_desc)); - kfree(ti_manuf_desc); - return -EINVAL; - } + /* + * Check version number of download with current + * version in I2c + */ + download_cur_ver = (firmware_version->Ver_Major << 8) + + (firmware_version->Ver_Minor); + download_new_ver = (fw_hdr->major_version << 8) + + (fw_hdr->minor_version); - rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); - if (!rom_desc) { - kfree(ti_manuf_desc); - return -ENOMEM; - } + dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", + __func__, firmware_version->Ver_Major, + firmware_version->Ver_Minor, + fw_hdr->major_version, fw_hdr->minor_version); - /* Search for type 2 record (firmware record) */ - start_address = get_descriptor_addr(serial, - I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc); - if (start_address != 0) { - struct ti_i2c_firmware_rec *firmware_version; - u8 *record; - - dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__); + /* + * Check if we have an old version in the I2C and + * update if necessary + */ + if (download_cur_ver < download_new_ver) { + dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + fw_hdr->major_version, + fw_hdr->minor_version); - firmware_version = kmalloc(sizeof(*firmware_version), - GFP_KERNEL); - if (!firmware_version) { + record = kmalloc(1, GFP_KERNEL); + if (!record) { + kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); return -ENOMEM; } + /* + * In order to update the I2C firmware we must + * change the type 2 record to type 0xF2. This + * will force the UMP to come up in Boot Mode. + * Then while in boot mode, the driver will + * download the latest firmware (padded to + * 15.5k) into the UMP ram. Finally when the + * device comes back up in download mode the + * driver will cause the new firmware to be + * copied from the UMP Ram to I2C and the + * firmware will update the record type from + * 0xf2 to 0x02. + */ + *record = I2C_DESC_TYPE_FIRMWARE_BLANK; - /* Validate version number - * Read the descriptor data + /* + * Change the I2C Firmware record type to + * 0xf2 to trigger an update */ - status = read_rom(serial, start_address + - sizeof(struct ti_i2c_desc), - sizeof(struct ti_i2c_firmware_rec), - (__u8 *)firmware_version); + status = write_rom(serial, start_address, + sizeof(*record), record); if (status) { + kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); return status; } - /* Check version number of download with current - version in I2c */ - download_cur_ver = (firmware_version->Ver_Major << 8) + - (firmware_version->Ver_Minor); - download_new_ver = (fw_hdr->major_version << 8) + - (fw_hdr->minor_version); - - dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", - __func__, firmware_version->Ver_Major, - firmware_version->Ver_Minor, - fw_hdr->major_version, fw_hdr->minor_version); + /* + * verify the write -- must do this in order + * for write to complete before we do the + * hardware reset + */ + status = read_rom(serial, + start_address, + sizeof(*record), + record); + if (status) { + kfree(record); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return status; + } - /* Check if we have an old version in the I2C and - update if necessary */ - if (download_cur_ver < download_new_ver) { - dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - fw_hdr->major_version, - fw_hdr->minor_version); - - record = kmalloc(1, GFP_KERNEL); - if (!record) { - kfree(firmware_version); - kfree(rom_desc); - kfree(ti_manuf_desc); - return -ENOMEM; - } - /* In order to update the I2C firmware we must - * change the type 2 record to type 0xF2. This - * will force the UMP to come up in Boot Mode. - * Then while in boot mode, the driver will - * download the latest firmware (padded to - * 15.5k) into the UMP ram. Finally when the - * device comes back up in download mode the - * driver will cause the new firmware to be - * copied from the UMP Ram to I2C and the - * firmware will update the record type from - * 0xf2 to 0x02. - */ - *record = I2C_DESC_TYPE_FIRMWARE_BLANK; - - /* Change the I2C Firmware record type to - 0xf2 to trigger an update */ - status = write_rom(serial, start_address, - sizeof(*record), record); - if (status) { - kfree(record); - kfree(firmware_version); - kfree(rom_desc); - kfree(ti_manuf_desc); - return status; - } - - /* verify the write -- must do this in order - * for write to complete before we do the - * hardware reset - */ - status = read_rom(serial, - start_address, - sizeof(*record), - record); - if (status) { - kfree(record); - kfree(firmware_version); - kfree(rom_desc); - kfree(ti_manuf_desc); - return status; - } - - if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { - dev_err(dev, "%s - error resetting device\n", __func__); - kfree(record); - kfree(firmware_version); - kfree(rom_desc); - kfree(ti_manuf_desc); - return -ENODEV; - } - - dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); - - /* Reset UMP -- Back to BOOT MODE */ - status = ti_vsend_sync(serial->serial->dev, - UMPC_HARDWARE_RESET, - 0, 0, NULL, 0, - TI_VSEND_TIMEOUT_DEFAULT); - - dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status); - - /* return an error on purpose. */ + if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { + dev_err(dev, "%s - error resetting device\n", + __func__); kfree(record); kfree(firmware_version); kfree(rom_desc); kfree(ti_manuf_desc); return -ENODEV; - } else { - /* Same or newer fw version is already loaded */ - serial->fw_version = download_cur_ver; } + + dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); + + /* Reset UMP -- Back to BOOT MODE */ + status = ti_vsend_sync(serial->serial->dev, + UMPC_HARDWARE_RESET, + 0, 0, NULL, 0, + TI_VSEND_TIMEOUT_DEFAULT); + + dev_dbg(dev, "%s - HARDWARE RESET return %d\n", + __func__, status); + + /* return an error on purpose. */ + kfree(record); kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENODEV; } - /* Search for type 0xF2 record (firmware blank record) */ - else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) { + /* Same or newer fw version is already loaded */ + serial->fw_version = download_cur_ver; + kfree(firmware_version); + } + /* Search for type 0xF2 record (firmware blank record) */ + else { + start_address = get_descriptor_addr(serial, + I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc); + if (start_address != 0) { #define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \ - sizeof(struct ti_i2c_firmware_rec)) + sizeof(struct ti_i2c_firmware_rec)) __u8 *header; __u8 *vheader; @@ -1232,7 +1287,8 @@ static int download_fw(struct edgeport_serial *serial, return -ENOMEM; } - dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__); + dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", + __func__); /* * In order to update the I2C firmware we must change @@ -1245,7 +1301,7 @@ static int download_fw(struct edgeport_serial *serial, * UMP Ram to I2C and the firmware will update the * record type from 0xf2 to 0x02. */ - status = build_i2c_fw_hdr(header, dev, fw); + status = build_i2c_fw_hdr(header, fw); if (status) { kfree(vheader); kfree(header); @@ -1254,8 +1310,10 @@ static int download_fw(struct edgeport_serial *serial, return -EINVAL; } - /* Update I2C with type 0xf2 record with correct - size and checksum */ + /* + * Update I2C with type 0xf2 record with correct + * size and checksum + */ status = write_rom(serial, start_address, HEADER_SIZE, @@ -1268,13 +1326,16 @@ static int download_fw(struct edgeport_serial *serial, return -EINVAL; } - /* verify the write -- must do this in order for - write to complete before we do the hardware reset */ + /* + * verify the write -- must do this in order for + * write to complete before we do the hardware reset + */ status = read_rom(serial, start_address, HEADER_SIZE, vheader); if (status) { - dev_dbg(dev, "%s - can't read header back\n", __func__); + dev_dbg(dev, "%s - can't read header back\n", + __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1282,7 +1343,8 @@ static int download_fw(struct edgeport_serial *serial, return status; } if (memcmp(vheader, header, HEADER_SIZE)) { - dev_dbg(dev, "%s - write download record failed\n", __func__); + dev_dbg(dev, "%s - write download record failed\n", + __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1301,26 +1363,33 @@ static int download_fw(struct edgeport_serial *serial, 0, 0, NULL, 0, TI_VSEND_TIMEOUT_FW_DOWNLOAD); - dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status); + dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, + status); if (status) { dev_err(dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", - __func__); + __func__); kfree(rom_desc); kfree(ti_manuf_desc); return status; } } - - // The device is running the download code - kfree(rom_desc); - kfree(ti_manuf_desc); - return 0; } - /********************************************************************/ - /* Boot Mode */ - /********************************************************************/ + /* The device is running the download code */ + kfree(rom_desc); + kfree(ti_manuf_desc); + return 0; +} + +static int do_boot_mode(struct edgeport_serial *serial, + const struct firmware *fw) +{ + struct device *dev = &serial->serial->interface->dev; + int status = 0; + struct edge_ti_manuf_descriptor *ti_manuf_desc; + struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data; + dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__); /* Configure the TI device so we can use the BULK pipes for download */ @@ -1336,8 +1405,10 @@ static int download_fw(struct edgeport_serial *serial, goto stayinbootmode; } - /* We have an ION device (I2c Must be programmed) - Determine I2C image type */ + /* + * We have an ION device (I2c Must be programmed) + * Determine I2C image type + */ if (i2c_type_bootmode(serial)) goto stayinbootmode; @@ -1349,7 +1420,8 @@ static int download_fw(struct edgeport_serial *serial, __u8 *buffer; int buffer_size; - /* Validate Hardware version number + /* + * Validate Hardware version number * Read Manufacturing Descriptor from TI Based Edgeport */ ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); @@ -1439,7 +1511,6 @@ stayinbootmode: return 0; } - static int ti_do_config(struct edgeport_port *port, int feature, int on) { int port_number = port->port->port_number; @@ -1450,7 +1521,6 @@ static int ti_do_config(struct edgeport_port *port, int feature, int on) on, NULL, 0); } - static int restore_mcr(struct edgeport_port *port, __u8 mcr) { int status = 0; @@ -1556,7 +1626,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, icount->frame++; } - static void edge_interrupt_callback(struct urb *urb) { struct edgeport_serial *edge_serial = urb->context; @@ -1616,8 +1685,9 @@ static void edge_interrupt_callback(struct urb *urb) case TIUMP_INTERRUPT_CODE_LSR: lsr = map_line_status(data[1]); if (lsr & UMP_UART_LSR_DATA_MASK) { - /* Save the LSR event for bulk read - completion routine */ + /* + * Save the LSR event for bulk read completion routine + */ dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n", __func__, port_number, lsr); edge_port->lsr_event = 1; @@ -1925,8 +1995,10 @@ static void edge_close(struct usb_serial_port *port) if (edge_serial == NULL || edge_port == NULL) return; - /* The bulkreadcompletion routine will check - * this flag and dump add read data */ + /* + * The bulkreadcompletion routine will check + * this flag and dump add read data + */ edge_port->close_pending = 1; usb_kill_urb(port->read_urb); @@ -2016,8 +2088,10 @@ static void edge_send(struct usb_serial_port *port, struct tty_struct *tty) } else edge_port->port->icount.tx += count; - /* wakeup any process waiting for writes to complete */ - /* there is now more room in the buffer for new writes */ + /* + * wakeup any process waiting for writes to complete + * there is now more room in the buffer for new writes + */ if (tty) tty_wakeup(tty); } @@ -2089,8 +2163,10 @@ static void edge_throttle(struct tty_struct *tty) } } - /* if we are implementing RTS/CTS, stop reads */ - /* and the Edgeport will clear the RTS line */ + /* + * if we are implementing RTS/CTS, stop reads + * and the Edgeport will clear the RTS line + */ if (C_CRTSCTS(tty)) stop_read(edge_port); @@ -2113,8 +2189,10 @@ static void edge_unthrottle(struct tty_struct *tty) dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status); } } - /* if we are implementing RTS/CTS, restart reads */ - /* are the Edgeport will assert the RTS line */ + /* + * if we are implementing RTS/CTS, restart reads + * are the Edgeport will assert the RTS line + */ if (C_CRTSCTS(tty)) { status = restart_read(edge_port); if (status) @@ -2236,8 +2314,10 @@ static void change_port_settings(struct tty_struct *tty, restart_read(edge_port); } - /* if we are implementing XON/XOFF, set the start and stop - character in the device */ + /* + * if we are implementing XON/XOFF, set the start and stop + * character in the device + */ config->cXon = START_CHAR(tty); config->cXoff = STOP_CHAR(tty); @@ -2467,9 +2547,6 @@ static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; int status; - const struct firmware *fw; - const char *fw_name = "/*(DEBLOBBED)*/"; - struct device *dev = &serial->interface->dev; u16 product_id; /* create our private serial structure */ @@ -2481,16 +2558,7 @@ static int edge_startup(struct usb_serial *serial) edge_serial->serial = serial; usb_set_serial_data(serial, edge_serial); - status = reject_firmware(&fw, fw_name, dev); - if (status) { - dev_err(dev, "Failed to load image \"%s\" err %d\n", - fw_name, status); - kfree(edge_serial); - return status; - } - - status = download_fw(edge_serial, fw); - release_firmware(fw); + status = download_fw(edge_serial); if (status) { kfree(edge_serial); return status; -- cgit v1.2.3-54-g00ecf