From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/usb/wusbcore/rh.c | 440 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 440 insertions(+) create mode 100644 drivers/usb/wusbcore/rh.c (limited to 'drivers/usb/wusbcore/rh.c') diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c new file mode 100644 index 000000000..a082fe62b --- /dev/null +++ b/drivers/usb/wusbcore/rh.c @@ -0,0 +1,440 @@ +/* + * Wireless USB Host Controller + * Root Hub operations + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We fake a root hub that has fake ports (as many as simultaneous + * devices the Wireless USB Host Controller can deal with). For each + * port we keep an state in @wusbhc->port[index] identical to the one + * specified in the USB2.0[ch11] spec and some extra device + * information that complements the one in 'struct usb_device' (as + * this lacs a hcpriv pointer). + * + * Note this is common to WHCI and HWA host controllers. + * + * Through here we enable most of the state changes that the USB stack + * will use to connect or disconnect devices. We need to do some + * forced adaptation of Wireless USB device states vs. wired: + * + * USB: WUSB: + * + * Port Powered-off port slot n/a + * Powered-on port slot available + * Disconnected port slot available + * Connected port slot assigned device + * device sent DN_Connect + * device was authenticated + * Enabled device is authenticated, transitioned + * from unauth -> auth -> default address + * -> enabled + * Reset disconnect + * Disable disconnect + * + * This maps the standard USB port states with the WUSB device states + * so we can fake ports without having to modify the USB stack. + * + * FIXME: this process will change in the future + * + * + * ENTRY POINTS + * + * Our entry points into here are, as in hcd.c, the USB stack root hub + * ops defined in the usb_hcd struct: + * + * wusbhc_rh_status_data() Provide hub and port status data bitmap + * + * wusbhc_rh_control() Execution of all the major requests + * you can do to a hub (Set|Clear + * features, get descriptors, status, etc). + * + * wusbhc_rh_[suspend|resume]() That + * + * wusbhc_rh_start_port_reset() ??? unimplemented + */ +#include +#include +#include "wusbhc.h" + +/* + * Reset a fake port + * + * Using a Reset Device IE is too heavyweight as it causes the device + * to enter the UnConnected state and leave the cluster, this can mean + * that when the device reconnects it is connected to a different fake + * port. + * + * Instead, reset authenticated devices with a SetAddress(0), followed + * by a SetAddresss(AuthAddr). + * + * For unauthenticated devices just pretend to reset but do nothing. + * If the device initialization continues to fail it will eventually + * time out after TrustTimeout and enter the UnConnected state. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Supposedly we are the only thread accesing @wusbhc->port; in any + * case, maybe we should move the mutex locking from + * wusbhc_devconnect_auth() to here. + * + * @port_idx refers to the wusbhc's port index, not the USB port number + */ +static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) +{ + int result = 0; + struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); + struct wusb_dev *wusb_dev = port->wusb_dev; + + if (wusb_dev == NULL) + return -ENOTCONN; + + port->status |= USB_PORT_STAT_RESET; + port->change |= USB_PORT_STAT_C_RESET; + + if (wusb_dev->addr & WUSB_DEV_ADDR_UNAUTH) + result = 0; + else + result = wusb_dev_update_address(wusbhc, wusb_dev); + + port->status &= ~USB_PORT_STAT_RESET; + port->status |= USB_PORT_STAT_ENABLE; + port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE; + + return result; +} + +/* + * Return the hub change status bitmap + * + * The bits in the change status bitmap are cleared when a + * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * WARNING!! This gets called from atomic context; we cannot get the + * mutex--the only race condition we can find is some bit + * changing just after we copy it, which shouldn't be too + * big of a problem [and we can't make it an spinlock + * because other parts need to take it and sleep] . + * + * @usb_hcd is refcounted, so it won't disappear under us + * and before killing a host, the polling of the root hub + * would be stopped anyway. + */ +int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + size_t cnt, size, bits_set = 0; + + /* WE DON'T LOCK, see comment */ + /* round up to bytes. Hub bit is bit 0 so add 1. */ + size = DIV_ROUND_UP(wusbhc->ports_max + 1, 8); + + /* clear the output buffer. */ + memset(_buf, 0, size); + /* set the bit for each changed port. */ + for (cnt = 0; cnt < wusbhc->ports_max; cnt++) { + + if (wusb_port_by_idx(wusbhc, cnt)->change) { + const int bitpos = cnt+1; + + _buf[bitpos/8] |= (1 << (bitpos % 8)); + bits_set++; + } + } + + return bits_set ? size : 0; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); + +/* + * Return the hub's descriptor + * + * NOTE: almost cut and paste from ehci-hub.c + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked + */ +static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, + u16 wIndex, + struct usb_hub_descriptor *descr, + u16 wLength) +{ + u16 temp = 1 + (wusbhc->ports_max / 8); + u8 length = 7 + 2 * temp; + + if (wLength < length) + return -ENOSPC; + descr->bDescLength = 7 + 2 * temp; + descr->bDescriptorType = USB_DT_HUB; /* HUB type */ + descr->bNbrPorts = wusbhc->ports_max; + descr->wHubCharacteristics = cpu_to_le16( + HUB_CHAR_COMMON_LPSM /* All ports power at once */ + | 0x00 /* not part of compound device */ + | HUB_CHAR_NO_OCPM /* No overcurrent protection */ + | 0x00 /* 8 FS think time FIXME ?? */ + | 0x00); /* No port indicators */ + descr->bPwrOn2PwrGood = 0; + descr->bHubContrCurrent = 0; + /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&descr->u.hs.DeviceRemovable[0], 0, temp); + memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp); + return 0; +} + +/* + * Clear a hub feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) +{ + int result; + + switch (feature) { + case C_HUB_LOCAL_POWER: + /* FIXME: maybe plug bit 0 to the power input status, + * if any? + * see wusbhc_rh_get_hub_status() */ + case C_HUB_OVER_CURRENT: + result = 0; + break; + default: + result = -EPIPE; + } + return result; +} + +/* + * Return hub status (it is always zero...) + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, + u16 wLength) +{ + /* FIXME: maybe plug bit 0 to the power input status (if any)? */ + *buf = 0; + return 0; +} + +/* + * Set a port feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + struct device *dev = wusbhc->dev; + + if (port_idx > wusbhc->ports_max) + return -EINVAL; + + switch (feature) { + /* According to USB2.0[11.24.2.13]p2, these features + * are not required to be implemented. */ + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + return 0; + case USB_PORT_FEAT_POWER: + /* No such thing, but we fake it works */ + mutex_lock(&wusbhc->mutex); + wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; + mutex_unlock(&wusbhc->mutex); + return 0; + case USB_PORT_FEAT_RESET: + return wusbhc_rh_port_reset(wusbhc, port_idx); + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_SUSPEND: + dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + return -ENOSYS; + default: + dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + return -EPIPE; + } + + return 0; +} + +/* + * Clear a port feature... + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = 0; + struct device *dev = wusbhc->dev; + + if (port_idx > wusbhc->ports_max) + return -EINVAL; + + mutex_lock(&wusbhc->mutex); + switch (feature) { + case USB_PORT_FEAT_POWER: /* fake port always on */ + /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ + case USB_PORT_FEAT_C_OVER_CURRENT: + break; + case USB_PORT_FEAT_C_RESET: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; + break; + case USB_PORT_FEAT_C_CONNECTION: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_ENABLE: + __wusbhc_dev_disable(wusbhc, port_idx); + break; + case USB_PORT_FEAT_C_ENABLE: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + case USB_PORT_FEAT_C_SUSPEND: + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } + mutex_unlock(&wusbhc->mutex); + + return result; +} + +/* + * Return the port's status + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, + u32 *_buf, u16 wLength) +{ + __le16 *buf = (__le16 *)_buf; + + if (port_idx > wusbhc->ports_max) + return -EINVAL; + + mutex_lock(&wusbhc->mutex); + buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); + buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); + mutex_unlock(&wusbhc->mutex); + + return 0; +} + +/* + * Entry point for Root Hub operations + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + int result = -ENOSYS; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + + switch (reqntype) { + case GetHubDescriptor: + result = wusbhc_rh_get_hub_descr( + wusbhc, wValue, wIndex, + (struct usb_hub_descriptor *) buf, wLength); + break; + case ClearHubFeature: + result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); + break; + case GetHubStatus: + result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); + break; + + case SetPortFeature: + result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case ClearPortFeature: + result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case GetPortStatus: + result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, + (u32 *)buf, wLength); + break; + + case SetHubFeature: + default: + dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " + "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, + wValue, wIndex, buf, wLength); + /* dump_stack(); */ + result = -ENOSYS; + } + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_control); + +int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", + __func__, usb_hcd, wusbhc, port_idx); + WARN_ON(1); + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); + +static void wusb_port_init(struct wusb_port *port) +{ + port->status |= USB_PORT_STAT_HIGH_SPEED; +} + +/* + * Alloc fake port specific fields and status. + */ +int wusbhc_rh_create(struct wusbhc *wusbhc) +{ + int result = -ENOMEM; + size_t port_size, itr; + port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); + wusbhc->port = kzalloc(port_size, GFP_KERNEL); + if (wusbhc->port == NULL) + goto error_port_alloc; + for (itr = 0; itr < wusbhc->ports_max; itr++) + wusb_port_init(&wusbhc->port[itr]); + result = 0; +error_port_alloc: + return result; +} + +void wusbhc_rh_destroy(struct wusbhc *wusbhc) +{ + kfree(wusbhc->port); +} -- cgit v1.2.3-54-g00ecf