From 8dec7c70575785729a6a9e6719a955e9c545bcab Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Fri, 5 Aug 2016 02:19:08 -0300
Subject: Linux-libre 4.6.5-gnu

---
 drivers/usb/common/usb-otg-fsm.c |  2 ++
 drivers/usb/core/hcd.c           | 17 +++++++----------
 drivers/usb/dwc2/core.h          | 27 +++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 10 deletions(-)

(limited to 'drivers/usb')

diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
index 504708f59..6c6040c22 100644
--- a/drivers/usb/common/usb-otg-fsm.c
+++ b/drivers/usb/common/usb-otg-fsm.c
@@ -21,6 +21,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mutex.h>
@@ -452,3 +453,4 @@ int otg_statemachine(struct otg_fsm *fsm)
 	return state_changed;
 }
 EXPORT_SYMBOL_GPL(otg_statemachine);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 980fc5774..2d107d0f6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2597,26 +2597,23 @@ EXPORT_SYMBOL_GPL(usb_create_hcd);
  * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
  * deallocated.
  *
- * Make sure to only deallocate the bandwidth_mutex when the primary HCD is
- * freed.  When hcd_release() is called for either hcd in a peer set
- * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to
- * block new peering attempts
+ * Make sure to deallocate the bandwidth_mutex only when the last HCD is
+ * freed.  When hcd_release() is called for either hcd in a peer set,
+ * invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
  */
 static void hcd_release(struct kref *kref)
 {
 	struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
 
 	mutex_lock(&usb_port_peer_mutex);
-	if (usb_hcd_is_primary_hcd(hcd)) {
-		kfree(hcd->address0_mutex);
-		kfree(hcd->bandwidth_mutex);
-	}
 	if (hcd->shared_hcd) {
 		struct usb_hcd *peer = hcd->shared_hcd;
 
 		peer->shared_hcd = NULL;
-		if (peer->primary_hcd == hcd)
-			peer->primary_hcd = NULL;
+		peer->primary_hcd = NULL;
+	} else {
+		kfree(hcd->address0_mutex);
+		kfree(hcd->bandwidth_mutex);
 	}
 	mutex_unlock(&usb_port_peer_mutex);
 	kfree(hcd);
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 3c58d633c..dec0b21fc 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -64,6 +64,17 @@
 	DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt),		\
 				dev_name(hsotg->dev), ##__VA_ARGS__)
 
+#ifdef CONFIG_MIPS
+/*
+ * There are some MIPS machines that can run in either big-endian
+ * or little-endian mode and that use the dwc2 register without
+ * a byteswap in both ways.
+ * Unlike other architectures, MIPS apparently does not require a
+ * barrier before the __raw_writel() to synchronize with DMA but does
+ * require the barrier after the __raw_writel() to serialize a set of
+ * writes. This set of operations was added specifically for MIPS and
+ * should only be used there.
+ */
 static inline u32 dwc2_readl(const void __iomem *addr)
 {
 	u32 value = __raw_readl(addr);
@@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr)
 	pr_info("INFO:: wrote %08x to %p\n", value, addr);
 #endif
 }
+#else
+/* Normal architectures just use readl/write */
+static inline u32 dwc2_readl(const void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void dwc2_writel(u32 value, void __iomem *addr)
+{
+	writel(value, addr);
+
+#ifdef DWC2_LOG_WRITES
+	pr_info("info:: wrote %08x to %p\n", value, addr);
+#endif
+}
+#endif
 
 /* Maximum number of Endpoints/HostChannels */
 #define MAX_EPS_CHANNELS	16
-- 
cgit v1.2.3-54-g00ecf