From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- drivers/video/backlight/cr_bllcd.c | 288 +++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 drivers/video/backlight/cr_bllcd.c (limited to 'drivers/video/backlight/cr_bllcd.c') diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c new file mode 100644 index 000000000..3e3880fc8 --- /dev/null +++ b/drivers/video/backlight/cr_bllcd.c @@ -0,0 +1,288 @@ +/* + * Copyright (c) Intel Corp. 2007. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + * This file is part of the Carillo Ranch video subsystem driver. + * The Carillo Ranch video subsystem driver is free software; + * you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Carillo Ranch video subsystem driver is distributed + * in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: + * Thomas Hellstrom + * Alan Hourihane + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The LVDS- and panel power controls sits on the + * GPIO port of the ISA bridge. + */ + +#define CRVML_DEVICE_LPC 0x27B8 +#define CRVML_REG_GPIOBAR 0x48 +#define CRVML_REG_GPIOEN 0x4C +#define CRVML_GPIOEN_BIT (1 << 4) +#define CRVML_PANEL_PORT 0x38 +#define CRVML_LVDS_ON 0x00000001 +#define CRVML_PANEL_ON 0x00000002 +#define CRVML_BACKLIGHT_OFF 0x00000004 + +/* The PLL Clock register sits on Host bridge */ +#define CRVML_DEVICE_MCH 0x5001 +#define CRVML_REG_MCHBAR 0x44 +#define CRVML_REG_MCHEN 0x54 +#define CRVML_MCHEN_BIT (1 << 28) +#define CRVML_MCHMAP_SIZE 4096 +#define CRVML_REG_CLOCK 0xc3c +#define CRVML_CLOCK_SHIFT 8 +#define CRVML_CLOCK_MASK 0x00000f00 + +static struct pci_dev *lpc_dev; +static u32 gpio_bar; + +struct cr_panel { + struct backlight_device *cr_backlight_device; + struct lcd_device *cr_lcd_device; +}; + +static int cr_backlight_set_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + if (bd->props.power == FB_BLANK_UNBLANK) + intensity = FB_BLANK_UNBLANK; + if (bd->props.fb_blank == FB_BLANK_UNBLANK) + intensity = FB_BLANK_UNBLANK; + if (bd->props.power == FB_BLANK_POWERDOWN) + intensity = FB_BLANK_POWERDOWN; + if (bd->props.fb_blank == FB_BLANK_POWERDOWN) + intensity = FB_BLANK_POWERDOWN; + + if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */ + cur &= ~CRVML_BACKLIGHT_OFF; + outl(cur, addr); + } else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */ + cur |= CRVML_BACKLIGHT_OFF; + outl(cur, addr); + } /* anything else, don't bother */ + + return 0; +} + +static int cr_backlight_get_intensity(struct backlight_device *bd) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + u8 intensity; + + if (cur & CRVML_BACKLIGHT_OFF) + intensity = FB_BLANK_POWERDOWN; + else + intensity = FB_BLANK_UNBLANK; + + return intensity; +} + +static const struct backlight_ops cr_backlight_ops = { + .get_brightness = cr_backlight_get_intensity, + .update_status = cr_backlight_set_intensity, +}; + +static void cr_panel_on(void) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + if (!(cur & CRVML_PANEL_ON)) { + /* Make sure LVDS controller is down. */ + if (cur & 0x00000001) { + cur &= ~CRVML_LVDS_ON; + outl(cur, addr); + } + /* Power up Panel */ + schedule_timeout(HZ / 10); + cur |= CRVML_PANEL_ON; + outl(cur, addr); + } + + /* Power up LVDS controller */ + + if (!(cur & CRVML_LVDS_ON)) { + schedule_timeout(HZ / 10); + outl(cur | CRVML_LVDS_ON, addr); + } +} + +static void cr_panel_off(void) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + /* Power down LVDS controller first to avoid high currents */ + if (cur & CRVML_LVDS_ON) { + cur &= ~CRVML_LVDS_ON; + outl(cur, addr); + } + if (cur & CRVML_PANEL_ON) { + schedule_timeout(HZ / 10); + outl(cur & ~CRVML_PANEL_ON, addr); + } +} + +static int cr_lcd_set_power(struct lcd_device *ld, int power) +{ + if (power == FB_BLANK_UNBLANK) + cr_panel_on(); + if (power == FB_BLANK_POWERDOWN) + cr_panel_off(); + + return 0; +} + +static struct lcd_ops cr_lcd_ops = { + .set_power = cr_lcd_set_power, +}; + +static int cr_backlight_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bdp; + struct lcd_device *ldp; + struct cr_panel *crp; + u8 dev_en; + + lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL, + CRVML_DEVICE_LPC, NULL); + if (!lpc_dev) { + pr_err("INTEL CARILLO RANCH LPC not found.\n"); + return -ENODEV; + } + + pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en); + if (!(dev_en & CRVML_GPIOEN_BIT)) { + pr_err("Carillo Ranch GPIO device was not enabled.\n"); + pci_dev_put(lpc_dev); + return -ENODEV; + } + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight", + &pdev->dev, NULL, &cr_backlight_ops, + &props); + if (IS_ERR(bdp)) { + pci_dev_put(lpc_dev); + return PTR_ERR(bdp); + } + + ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL, + &cr_lcd_ops); + if (IS_ERR(ldp)) { + pci_dev_put(lpc_dev); + return PTR_ERR(ldp); + } + + pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, + &gpio_bar); + gpio_bar &= ~0x3F; + + crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL); + if (!crp) { + pci_dev_put(lpc_dev); + return -ENOMEM; + } + + crp->cr_backlight_device = bdp; + crp->cr_lcd_device = ldp; + crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK; + crp->cr_backlight_device->props.brightness = 0; + cr_backlight_set_intensity(crp->cr_backlight_device); + cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK); + + platform_set_drvdata(pdev, crp); + + return 0; +} + +static int cr_backlight_remove(struct platform_device *pdev) +{ + struct cr_panel *crp = platform_get_drvdata(pdev); + + crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN; + crp->cr_backlight_device->props.brightness = 0; + crp->cr_backlight_device->props.max_brightness = 0; + cr_backlight_set_intensity(crp->cr_backlight_device); + cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN); + pci_dev_put(lpc_dev); + + return 0; +} + +static struct platform_driver cr_backlight_driver = { + .probe = cr_backlight_probe, + .remove = cr_backlight_remove, + .driver = { + .name = "cr_backlight", + }, +}; + +static struct platform_device *crp; + +static int __init cr_backlight_init(void) +{ + int ret = platform_driver_register(&cr_backlight_driver); + + if (ret) + return ret; + + crp = platform_device_register_simple("cr_backlight", -1, NULL, 0); + if (IS_ERR(crp)) { + platform_driver_unregister(&cr_backlight_driver); + return PTR_ERR(crp); + } + + pr_info("Carillo Ranch Backlight Driver Initialized.\n"); + + return 0; +} + +static void __exit cr_backlight_exit(void) +{ + platform_device_unregister(crp); + platform_driver_unregister(&cr_backlight_driver); +} + +module_init(cr_backlight_init); +module_exit(cr_backlight_exit); + +MODULE_AUTHOR("Tungsten Graphics Inc."); +MODULE_DESCRIPTION("Carillo Ranch Backlight Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-54-g00ecf